-
Notifications
You must be signed in to change notification settings - Fork 672
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
BUG 今天执行了一下全部更显后Option "i915.enable_guc=-1" not recognized - ignoring #149
Comments
modules 里 取消勾选 i915 |
无用,modules里只选择一个vmware的网卡驱动编译后,用dva自身的i915,dmesg里看直接挂起了。 [ 27.188921] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) |
今天将引导重新更换为23.7.4,并使用高级功能里的降级安装,重新安装后显卡依然失败,不晓得之前升级到新版引导导致系统修改了哪些东西,我该如何才能回到正常使用dva1622本身的i915.请指教。 |
Install ENV:
Arpl version:
DSM model:
DSM version:
Issue:
之前可以正常识别,加载guc
logs:
[ 0.000000] Command line: withefi synoboot_satadom=2 dom_szmax=1034 console=ttyS0,115200n8 earlyprintk earlycon=uart8250,io,0x3f8,115200n8 root=/dev/md0 loglevel=15 log_buf_len=32M syno_hw_version=DVA1622 i915.enable_guc=-1 netif_num=1 synoboot2 pid=0x0000 i915.enable_fbc=1 i915.force_probe=5916 mac1=0011327ef381 sn=2040UBRQMXSCL HddEnableDynamicPower=1 vid=0x0000 elevator=elevator intel_iommu=igfx_off i915.enable_dc=0 vender_format_version=2 syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8
[ 0.000000] Kernel command line: withefi synoboot_satadom=2 dom_szmax=1034 console=ttyS0,115200n8 earlyprintk earlycon=uart8250,io,0x3f8,115200n8 root=/dev/md0 loglevel=15 log_buf_len=32M syno_hw_version=DVA1622 i915.enable_guc=-1 netif_num=1 synoboot2 pid=0x0000 i915.enable_fbc=1 i915.force_probe=5916 mac1=0011327ef381 sn=2040UBRQMXSCL HddEnableDynamicPower=1 vid=0x0000 elevator=elevator intel_iommu=igfx_off i915.enable_dc=0 vender_format_version=2 syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8
[ 1.737429] <redpill/cmdline_delegate.c:417> Cmdline: withefi synoboot_satadom=2 dom_szmax=1034 console=ttyS0,115200n8 earlyprintk earlycon=uart8250,io,0x3f8,115200n8 root=/dev/md0 loglevel=15 log_buf_len=32M syno_hw_version=DVA1622 i915.enable_guc=-1 netif_num=1 synoboot2 pid=0x0000 i915.enable_fbc=1 i915.force_probe=5916 mac1=0011327ef381 sn=2040UBRQMXSCL HddEnableDynamicPower=1 vid=0x0000 elevator=elevator intel_iommu=igfx_off i915.enable_dc=0 vender_format_version=2 syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8
[ 1.738617] <redpill/cmdline_delegate.c:429> Param #10: |i915.enable_guc=-1|
[ 1.738627] <redpill/cmdline_delegate.c:324> Option "i915.enable_guc=-1" not recognized - ignoring
[ 1.738700] <redpill/cmdline_delegate.c:429> Param #14: |i915.enable_fbc=1|
[ 1.738711] <redpill/cmdline_delegate.c:324> Option "i915.enable_fbc=1" not recognized - ignoring
[ 1.738721] <redpill/cmdline_delegate.c:429> Param #15: |i915.force_probe=5916|
[ 1.738732] <redpill/cmdline_delegate.c:324> Option "i915.force_probe=5916" not recognized - ignoring
[ 1.738868] <redpill/cmdline_delegate.c:429> Param #22: |i915.enable_dc=0|
[ 1.738878] <redpill/cmdline_delegate.c:324> Option "i915.enable_dc=0" not recognized - ignoring
[ 1.765149] <redpill/sanitize_cmdline.c:102> Sanitized cmdline to: withefi console=ttyS0,115200n8 earlycon=uart8250,io,0x3f8,115200n8 root=/dev/md0 syno_hw_version=DVA1622 i915.enable_guc=-1 netif_num=1 synoboot2 i915.enable_fbc=1 i915.force_probe=5916 mac1=0011327ef381 sn=2040UBRQMXSCL HddEnableDynamicPower=1 intel_iommu=igfx_off i915.enable_dc=0 vender_format_version=2 syno_ttyS1=serial,0x2f8 syno_ttyS0=serial,0x3f8
[ 2.815538] i915 0000:0b:00.0: BAR 6: can't assign [??? 0x00000000 flags 0x20000000] (bogus alignment)
[ 2.816030] [drm:gen9_set_dc_state [i915]] ERROR DC state mismatch (0x0 -> 0x2)
[ 2.817474] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[ 2.824861] [drm] Initialized i915 1.6.0 20171222 for 0000:0b:00.0 on minor 0
[ 2.943893] i915 0000:0b:00.0: fb0: inteldrmfb frame buffer device
...
The text was updated successfully, but these errors were encountered: