AMD CPU STUCK AFTER BOOTING 7.2 XXXX

[Edwardpge]

Install ENV:
Gigabyte ga-H97-D3 motherboard:
AMD PHENOM X4 965 CPU:
NIC: e1000e x4

Arpl version: latest

DSM model: 16xx+
DSM version: 7.2 xxxx

Issue: Stuck After Booting not comes up

logs: Can't get logs beacuse system not reposnding.. while 7.1 xxxx is working fine and set
...

[wjz304]

You can enable dbgutils addon in arpl, then build, boot and wait 10 minutes, finally check /mnt/p1/logs in arpl.

[Edwardpge]

You can enable dbgutils addon in arpl, then build, boot and wait 10 minutes, finally check /mnt/p1/logs in arpl.

Okay!

[Edwardpge]

You can enable dbgutils addon in arpl, then build, boot and wait 10 minutes, finally check /mnt/p1/logs in arpl.

Nothing

[Edwardpge]

No logs

[Edwardpge]

[wjz304]

It's likely that the kernel crashed,

Try switching to lkm

[Edwardpge]

It's likely that the kernel crashed,

Try switching to lkm

To Test or Dev

[wjz304]

Give it a try, different hardware is not fixed,

However, the CPU seems too old and may not be compatible with 7.2, or try waiting for a longer time

[Edwardpge]

Give it a try, different hardware is not fixed,

However, the CPU seems too old and may not be compatible with 7.2, or try waiting for a longer time

Okay Sure

[Edwardpge]

Nothing Sir, 7.1 works smoothly and fine, while 7.2 stuck after booting nothing comes up..

[Edwardpge]

Any other solution?

[wjz304]

No logs or serial ports, can only guess

https://github.com/wjz304/arpl-i18n/wiki/%E5%85%B3%E4%BA%8E-%22%E5%90%AF%E5%8A%A8%22-%E5%90%8E%E6%97%A0%E6%B3%95%E6%89%BE%E5%88%B0DSM

Because my English is very poor, I didn't write it in English,
I don't know if you can understand Google Translate

[Edwardpge]

No logs or serial ports, can only guess

https://github.com/wjz304/arpl-i18n/wiki/%E5%85%B3%E4%BA%8E-%22%E5%90%AF%E5%8A%A8%22-%E5%90%8E%E6%97%A0%E6%B3%95%E6%89%BE%E5%88%B0DSM

Because my English is very poor, I didn't write it in English,
I don't know if you can understand Google Translate

I got that i'll try it.