diff --git a/.github/workflows/bsp_buildings.yml b/.github/workflows/bsp_buildings.yml index deac6540d28..5f4e2fc3d53 100644 --- a/.github/workflows/bsp_buildings.yml +++ b/.github/workflows/bsp_buildings.yml @@ -188,6 +188,7 @@ jobs: - "stm32/stm32g474-st-nucleo" - "stm32/stm32h563-st-nucleo" - "stm32/stm32h503-st-nucleo" + - "stm32/stm32h723-st-nucleo" - "stm32/stm32h743-armfly-v7" - "stm32/stm32h743-atk-apollo" - "stm32/stm32h743-openmv-h7plus" diff --git a/bsp/stm32/stm32h723-st-nucleo/.config b/bsp/stm32/stm32h723-st-nucleo/.config new file mode 100644 index 00000000000..b0504279fc7 --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/.config @@ -0,0 +1,1275 @@ +CONFIG_SOC_STM32H723ZG=y +CONFIG_BOARD_STM32H723_NUCLEO=y + +# +# RT-Thread Kernel +# + +# +# klibc options +# + +# +# ------------rt_memset options------------ +# +# CONFIG_RT_KLIBC_USING_USER_MEMSET is not set +# CONFIG_RT_KLIBC_USING_LIBC_MEMSET is not set +# CONFIG_RT_KLIBC_USING_TINY_MEMSET is not set + +# +# ------------rt_memcpy options------------ +# +# CONFIG_RT_KLIBC_USING_USER_MEMCPY is not set +# CONFIG_RT_KLIBC_USING_LIBC_MEMCPY is not set +# CONFIG_RT_KLIBC_USING_TINY_MEMCPY is not set + +# +# ------------rt_memmove options------------ +# +# CONFIG_RT_KLIBC_USING_USER_MEMMOVE is not set +# CONFIG_RT_KLIBC_USING_LIBC_MEMMOVE is not set + +# +# ------------rt_memcmp options------------ +# +# CONFIG_RT_KLIBC_USING_USER_MEMCMP is not set +# CONFIG_RT_KLIBC_USING_LIBC_MEMCMP is not set + +# +# ------------rt_strstr options------------ +# +# CONFIG_RT_KLIBC_USING_USER_STRSTR is not set +# CONFIG_RT_KLIBC_USING_LIBC_STRSTR is not set + +# +# ------------rt_strcasecmp options------------ +# +# CONFIG_RT_KLIBC_USING_USER_STRCASECMP is not set + +# +# ------------rt_strncpy options------------ +# +# CONFIG_RT_KLIBC_USING_USER_STRNCPY is not set +# CONFIG_RT_KLIBC_USING_LIBC_STRNCPY is not set + +# +# ------------rt_strcpy options------------ +# +# CONFIG_RT_KLIBC_USING_USER_STRCPY is not set +# CONFIG_RT_KLIBC_USING_LIBC_STRCPY is not set + +# +# ------------rt_strncmp options------------ +# +# CONFIG_RT_KLIBC_USING_USER_STRNCMP is not set +# CONFIG_RT_KLIBC_USING_LIBC_STRNCMP is not set + +# +# ------------rt_strcmp options------------ +# +# CONFIG_RT_KLIBC_USING_USER_STRCMP is not set +# CONFIG_RT_KLIBC_USING_LIBC_STRCMP is not set + +# +# ------------rt_strlen options------------ +# +# CONFIG_RT_KLIBC_USING_USER_STRLEN is not set +# CONFIG_RT_KLIBC_USING_LIBC_STRLEN is not set + +# +# ------------rt_strlen options------------ +# + +# +# ------------rt_strnlen options------------ +# +# CONFIG_RT_KLIBC_USING_USER_STRNLEN is not set + +# +# ------------rt_vsscanf options------------ +# +# CONFIG_RT_KLIBC_USING_LIBC_VSSCANF is not set + +# +# ------------rt_vsnprintf options------------ +# +# CONFIG_RT_KLIBC_USING_LIBC_VSNPRINTF is not set +# CONFIG_RT_KLIBC_USING_VSNPRINTF_LONGLONG is not set +# CONFIG_RT_KLIBC_USING_VSNPRINTF_STANDARD is not set +# end of klibc options + +CONFIG_RT_NAME_MAX=8 +# CONFIG_RT_USING_ARCH_DATA_TYPE is not set +# CONFIG_RT_USING_NANO is not set +# CONFIG_RT_USING_SMART is not set +# CONFIG_RT_USING_AMP is not set +# CONFIG_RT_USING_SMP is not set +CONFIG_RT_CPUS_NR=1 +CONFIG_RT_ALIGN_SIZE=8 +# CONFIG_RT_THREAD_PRIORITY_8 is not set +CONFIG_RT_THREAD_PRIORITY_32=y +# CONFIG_RT_THREAD_PRIORITY_256 is not set +CONFIG_RT_THREAD_PRIORITY_MAX=32 +CONFIG_RT_TICK_PER_SECOND=1000 +CONFIG_RT_USING_OVERFLOW_CHECK=y +CONFIG_RT_USING_HOOK=y +CONFIG_RT_HOOK_USING_FUNC_PTR=y +# CONFIG_RT_USING_HOOKLIST is not set +CONFIG_RT_USING_IDLE_HOOK=y +CONFIG_RT_IDLE_HOOK_LIST_SIZE=4 +CONFIG_IDLE_THREAD_STACK_SIZE=256 +# CONFIG_RT_USING_TIMER_SOFT is not set +# CONFIG_RT_USING_CPU_USAGE_TRACER is not set + +# +# kservice options +# +# CONFIG_RT_USING_TINY_FFS is not set +# end of kservice options + +CONFIG_RT_USING_DEBUG=y +CONFIG_RT_DEBUGING_ASSERT=y +CONFIG_RT_DEBUGING_COLOR=y +CONFIG_RT_DEBUGING_CONTEXT=y +# CONFIG_RT_DEBUGING_AUTO_INIT is not set + +# +# Inter-Thread communication +# +CONFIG_RT_USING_SEMAPHORE=y +CONFIG_RT_USING_MUTEX=y +CONFIG_RT_USING_EVENT=y +CONFIG_RT_USING_MAILBOX=y +CONFIG_RT_USING_MESSAGEQUEUE=y +# CONFIG_RT_USING_MESSAGEQUEUE_PRIORITY is not set +# CONFIG_RT_USING_SIGNALS is not set +# end of Inter-Thread communication + +# +# Memory Management +# +CONFIG_RT_USING_MEMPOOL=y +CONFIG_RT_USING_SMALL_MEM=y +# CONFIG_RT_USING_SLAB is not set +# CONFIG_RT_USING_MEMHEAP is not set +CONFIG_RT_USING_SMALL_MEM_AS_HEAP=y +# CONFIG_RT_USING_MEMHEAP_AS_HEAP is not set +# CONFIG_RT_USING_SLAB_AS_HEAP is not set +# CONFIG_RT_USING_USERHEAP is not set +# CONFIG_RT_USING_NOHEAP is not set +# CONFIG_RT_USING_MEMTRACE is not set +# CONFIG_RT_USING_HEAP_ISR is not set +CONFIG_RT_USING_HEAP=y +# end of Memory Management + +CONFIG_RT_USING_DEVICE=y +# CONFIG_RT_USING_DEVICE_OPS is not set +# CONFIG_RT_USING_INTERRUPT_INFO is not set +# CONFIG_RT_USING_THREADSAFE_PRINTF is not set +CONFIG_RT_USING_CONSOLE=y +CONFIG_RT_CONSOLEBUF_SIZE=128 +CONFIG_RT_CONSOLE_DEVICE_NAME="uart3" +CONFIG_RT_VER_NUM=0x50200 +# CONFIG_RT_USING_STDC_ATOMIC is not set +CONFIG_RT_BACKTRACE_LEVEL_MAX_NR=32 +# end of RT-Thread Kernel + +CONFIG_RT_USING_CACHE=y +CONFIG_RT_USING_HW_ATOMIC=y +CONFIG_RT_USING_CPU_FFS=y +CONFIG_ARCH_ARM=y +CONFIG_ARCH_ARM_CORTEX_M=y +CONFIG_ARCH_ARM_CORTEX_M7=y + +# +# RT-Thread Components +# +CONFIG_RT_USING_COMPONENTS_INIT=y +CONFIG_RT_USING_USER_MAIN=y +CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048 +CONFIG_RT_MAIN_THREAD_PRIORITY=10 +# CONFIG_RT_USING_LEGACY is not set +CONFIG_RT_USING_MSH=y +CONFIG_RT_USING_FINSH=y +CONFIG_FINSH_USING_MSH=y +CONFIG_FINSH_THREAD_NAME="tshell" +CONFIG_FINSH_THREAD_PRIORITY=20 +CONFIG_FINSH_THREAD_STACK_SIZE=4096 +CONFIG_FINSH_USING_HISTORY=y +CONFIG_FINSH_HISTORY_LINES=5 +CONFIG_FINSH_USING_SYMTAB=y +CONFIG_FINSH_CMD_SIZE=80 +CONFIG_MSH_USING_BUILT_IN_COMMANDS=y +CONFIG_FINSH_USING_DESCRIPTION=y +# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set +# CONFIG_FINSH_USING_AUTH is not set +CONFIG_FINSH_ARG_MAX=10 +CONFIG_FINSH_USING_OPTION_COMPLETION=y + +# +# DFS: device virtual file system +# +# CONFIG_RT_USING_DFS is not set +# end of DFS: device virtual file system + +# CONFIG_RT_USING_FAL is not set + +# +# Device Drivers +# +# CONFIG_RT_USING_DM is not set +# CONFIG_RT_USING_DEV_BUS is not set +CONFIG_RT_USING_DEVICE_IPC=y +CONFIG_RT_UNAMED_PIPE_NUMBER=64 +# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set +CONFIG_RT_USING_SERIAL=y +CONFIG_RT_USING_SERIAL_V1=y +# CONFIG_RT_USING_SERIAL_V2 is not set +CONFIG_RT_SERIAL_USING_DMA=y +CONFIG_RT_SERIAL_RB_BUFSZ=64 +# CONFIG_RT_USING_CAN is not set +# CONFIG_RT_USING_CPUTIME is not set +# CONFIG_RT_USING_I2C is not set +# CONFIG_RT_USING_PHY is not set +# CONFIG_RT_USING_PHY_V2 is not set +# CONFIG_RT_USING_ADC is not set +# CONFIG_RT_USING_DAC is not set +# CONFIG_RT_USING_NULL is not set +# CONFIG_RT_USING_ZERO is not set +# CONFIG_RT_USING_RANDOM is not set +# CONFIG_RT_USING_PWM is not set +# CONFIG_RT_USING_PULSE_ENCODER is not set +# CONFIG_RT_USING_INPUT_CAPTURE is not set +# CONFIG_RT_USING_MTD_NOR is not set +# CONFIG_RT_USING_MTD_NAND is not set +# CONFIG_RT_USING_PM is not set +# CONFIG_RT_USING_RTC is not set +# CONFIG_RT_USING_SDIO is not set +# CONFIG_RT_USING_SPI is not set +# CONFIG_RT_USING_WDT is not set +# CONFIG_RT_USING_AUDIO is not set +# CONFIG_RT_USING_SENSOR is not set +# CONFIG_RT_USING_TOUCH is not set +# CONFIG_RT_USING_LCD is not set +# CONFIG_RT_USING_HWCRYPTO is not set +# CONFIG_RT_USING_WIFI is not set +# CONFIG_RT_USING_BLK is not set +# CONFIG_RT_USING_VIRTIO is not set +CONFIG_RT_USING_PIN=y +# CONFIG_RT_USING_KTIME is not set +# CONFIG_RT_USING_HWTIMER is not set +# CONFIG_RT_USING_CHERRYUSB is not set +# end of Device Drivers + +# +# C/C++ and POSIX layer +# + +# +# ISO-ANSI C layer +# + +# +# Timezone and Daylight Saving Time +# +# CONFIG_RT_LIBC_USING_FULL_TZ_DST is not set +CONFIG_RT_LIBC_USING_LIGHT_TZ_DST=y +CONFIG_RT_LIBC_TZ_DEFAULT_HOUR=8 +CONFIG_RT_LIBC_TZ_DEFAULT_MIN=0 +CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0 +# end of Timezone and Daylight Saving Time +# end of ISO-ANSI C layer + +# +# POSIX (Portable Operating System Interface) layer +# +# CONFIG_RT_USING_POSIX_FS is not set +# CONFIG_RT_USING_POSIX_DELAY is not set +# CONFIG_RT_USING_POSIX_CLOCK is not set +# CONFIG_RT_USING_POSIX_TIMER is not set +# CONFIG_RT_USING_PTHREADS is not set +# CONFIG_RT_USING_MODULE is not set + +# +# Interprocess Communication (IPC) +# +# CONFIG_RT_USING_POSIX_PIPE is not set +# CONFIG_RT_USING_POSIX_MESSAGE_QUEUE is not set +# CONFIG_RT_USING_POSIX_MESSAGE_SEMAPHORE is not set + +# +# Socket is in the 'Network' category +# +# end of Interprocess Communication (IPC) +# end of POSIX (Portable Operating System Interface) layer + +# CONFIG_RT_USING_CPLUSPLUS is not set +# end of C/C++ and POSIX layer + +# +# Network +# +# CONFIG_RT_USING_SAL is not set +# CONFIG_RT_USING_NETDEV is not set +# CONFIG_RT_USING_LWIP is not set +# CONFIG_RT_USING_AT is not set +# end of Network + +# +# Memory protection +# +# CONFIG_RT_USING_MEM_PROTECTION is not set +# CONFIG_RT_USING_HW_STACK_GUARD is not set +# end of Memory protection + +# +# Utilities +# +# CONFIG_RT_USING_RYM is not set +# CONFIG_RT_USING_ULOG is not set +# CONFIG_RT_USING_UTEST is not set +# CONFIG_RT_USING_VAR_EXPORT is not set +# CONFIG_RT_USING_RESOURCE_ID is not set +# CONFIG_RT_USING_ADT is not set +# CONFIG_RT_USING_RT_LINK is not set +# end of Utilities + +# CONFIG_RT_USING_VBUS is not set + +# +# Using USB legacy version +# +# CONFIG_RT_USING_USB_HOST is not set +# CONFIG_RT_USING_USB_DEVICE is not set +# end of Using USB legacy version + +# CONFIG_RT_USING_FDT is not set +# end of RT-Thread Components + +# +# RT-Thread Utestcases +# +# CONFIG_RT_USING_UTESTCASES is not set +# end of RT-Thread Utestcases + +# +# RT-Thread online packages +# + +# +# IoT - internet of things +# +# CONFIG_PKG_USING_LORAWAN_DRIVER is not set +# CONFIG_PKG_USING_PAHOMQTT is not set +# CONFIG_PKG_USING_UMQTT is not set +# CONFIG_PKG_USING_WEBCLIENT is not set +# CONFIG_PKG_USING_WEBNET is not set +# CONFIG_PKG_USING_MONGOOSE is not set +# CONFIG_PKG_USING_MYMQTT is not set +# CONFIG_PKG_USING_KAWAII_MQTT is not set +# CONFIG_PKG_USING_BC28_MQTT is not set +# CONFIG_PKG_USING_WEBTERMINAL is not set +# CONFIG_PKG_USING_FREEMODBUS is not set +# CONFIG_PKG_USING_NANOPB is not set +# CONFIG_PKG_USING_WIFI_HOST_DRIVER is not set + +# +# Wi-Fi +# + +# +# Marvell WiFi +# +# CONFIG_PKG_USING_WLANMARVELL is not set +# end of Marvell WiFi + +# +# Wiced WiFi +# +# CONFIG_PKG_USING_WLAN_WICED is not set +# end of Wiced WiFi + +# CONFIG_PKG_USING_RW007 is not set + +# +# CYW43012 WiFi +# +# CONFIG_PKG_USING_WLAN_CYW43012 is not set +# end of CYW43012 WiFi + +# +# BL808 WiFi +# +# CONFIG_PKG_USING_WLAN_BL808 is not set +# end of BL808 WiFi + +# +# CYW43439 WiFi +# +# CONFIG_PKG_USING_WLAN_CYW43439 is not set +# end of CYW43439 WiFi +# end of Wi-Fi + +# CONFIG_PKG_USING_COAP is not set +# CONFIG_PKG_USING_NOPOLL is not set +# CONFIG_PKG_USING_NETUTILS is not set +# CONFIG_PKG_USING_CMUX is not set +# CONFIG_PKG_USING_PPP_DEVICE is not set +# CONFIG_PKG_USING_AT_DEVICE is not set +# CONFIG_PKG_USING_ATSRV_SOCKET is not set +# CONFIG_PKG_USING_WIZNET is not set +# CONFIG_PKG_USING_ZB_COORDINATOR is not set + +# +# IoT Cloud +# +# CONFIG_PKG_USING_ONENET is not set +# CONFIG_PKG_USING_GAGENT_CLOUD is not set +# CONFIG_PKG_USING_ALI_IOTKIT is not set +# CONFIG_PKG_USING_AZURE is not set +# CONFIG_PKG_USING_TENCENT_IOT_EXPLORER is not set +# CONFIG_PKG_USING_JIOT-C-SDK is not set +# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set +# CONFIG_PKG_USING_JOYLINK is not set +# CONFIG_PKG_USING_IOTSHARP_SDK is not set +# end of IoT Cloud + +# CONFIG_PKG_USING_NIMBLE is not set +# CONFIG_PKG_USING_LLSYNC_SDK_ADAPTER is not set +# CONFIG_PKG_USING_OTA_DOWNLOADER is not set +# CONFIG_PKG_USING_IPMSG is not set +# CONFIG_PKG_USING_LSSDP is not set +# CONFIG_PKG_USING_AIRKISS_OPEN is not set +# CONFIG_PKG_USING_LIBRWS is not set +# CONFIG_PKG_USING_TCPSERVER is not set +# CONFIG_PKG_USING_PROTOBUF_C is not set +# CONFIG_PKG_USING_DLT645 is not set +# CONFIG_PKG_USING_QXWZ is not set +# CONFIG_PKG_USING_SMTP_CLIENT is not set +# CONFIG_PKG_USING_ABUP_FOTA is not set +# CONFIG_PKG_USING_LIBCURL2RTT is not set +# CONFIG_PKG_USING_CAPNP is not set +# CONFIG_PKG_USING_AGILE_TELNET is not set +# CONFIG_PKG_USING_NMEALIB is not set +# CONFIG_PKG_USING_PDULIB is not set +# CONFIG_PKG_USING_BTSTACK is not set +# CONFIG_PKG_USING_BT_CYW43012 is not set +# CONFIG_PKG_USING_CYW43XX is not set +# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set +# CONFIG_PKG_USING_WAYZ_IOTKIT is not set +# CONFIG_PKG_USING_MAVLINK is not set +# CONFIG_PKG_USING_BSAL is not set +# CONFIG_PKG_USING_AGILE_MODBUS is not set +# CONFIG_PKG_USING_AGILE_FTP is not set +# CONFIG_PKG_USING_EMBEDDEDPROTO is not set +# CONFIG_PKG_USING_RT_LINK_HW is not set +# CONFIG_PKG_USING_RYANMQTT is not set +# CONFIG_PKG_USING_RYANW5500 is not set +# CONFIG_PKG_USING_LORA_PKT_FWD is not set +# CONFIG_PKG_USING_LORA_GW_DRIVER_LIB is not set +# CONFIG_PKG_USING_LORA_PKT_SNIFFER is not set +# CONFIG_PKG_USING_HM is not set +# CONFIG_PKG_USING_SMALL_MODBUS is not set +# CONFIG_PKG_USING_NET_SERVER is not set +# CONFIG_PKG_USING_ZFTP is not set +# CONFIG_PKG_USING_WOL is not set +# CONFIG_PKG_USING_ZEPHYR_POLLING is not set +# CONFIG_PKG_USING_MATTER_ADAPTATION_LAYER is not set +# CONFIG_PKG_USING_LHC_MODBUS is not set +# CONFIG_PKG_USING_QMODBUS is not set +# end of IoT - internet of things + +# +# security packages +# +# CONFIG_PKG_USING_MBEDTLS is not set +# CONFIG_PKG_USING_LIBSODIUM is not set +# CONFIG_PKG_USING_LIBHYDROGEN is not set +# CONFIG_PKG_USING_TINYCRYPT is not set +# CONFIG_PKG_USING_TFM is not set +# CONFIG_PKG_USING_YD_CRYPTO is not set +# end of security packages + +# +# language packages +# + +# +# JSON: JavaScript Object Notation, a lightweight data-interchange format +# +# CONFIG_PKG_USING_CJSON is not set +# CONFIG_PKG_USING_LJSON is not set +# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set +# CONFIG_PKG_USING_RAPIDJSON is not set +# CONFIG_PKG_USING_JSMN is not set +# CONFIG_PKG_USING_AGILE_JSMN is not set +# CONFIG_PKG_USING_PARSON is not set +# end of JSON: JavaScript Object Notation, a lightweight data-interchange format + +# +# XML: Extensible Markup Language +# +# CONFIG_PKG_USING_SIMPLE_XML is not set +# CONFIG_PKG_USING_EZXML is not set +# end of XML: Extensible Markup Language + +# CONFIG_PKG_USING_LUATOS_SOC is not set +# CONFIG_PKG_USING_LUA is not set +# CONFIG_PKG_USING_JERRYSCRIPT is not set +# CONFIG_PKG_USING_MICROPYTHON is not set +# CONFIG_PKG_USING_PIKASCRIPT is not set +# CONFIG_PKG_USING_RTT_RUST is not set +# end of language packages + +# +# multimedia packages +# + +# +# LVGL: powerful and easy-to-use embedded GUI library +# +# CONFIG_PKG_USING_LVGL is not set +# CONFIG_PKG_USING_LV_MUSIC_DEMO is not set +# CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set +# end of LVGL: powerful and easy-to-use embedded GUI library + +# +# u8g2: a monochrome graphic library +# +# CONFIG_PKG_USING_U8G2_OFFICIAL is not set +# CONFIG_PKG_USING_U8G2 is not set +# end of u8g2: a monochrome graphic library + +# CONFIG_PKG_USING_OPENMV is not set +# CONFIG_PKG_USING_MUPDF is not set +# CONFIG_PKG_USING_STEMWIN is not set +# CONFIG_PKG_USING_WAVPLAYER is not set +# CONFIG_PKG_USING_TJPGD is not set +# CONFIG_PKG_USING_PDFGEN is not set +# CONFIG_PKG_USING_HELIX is not set +# CONFIG_PKG_USING_AZUREGUIX is not set +# CONFIG_PKG_USING_TOUCHGFX2RTT is not set +# CONFIG_PKG_USING_NUEMWIN is not set +# CONFIG_PKG_USING_MP3PLAYER is not set +# CONFIG_PKG_USING_TINYJPEG is not set +# CONFIG_PKG_USING_UGUI is not set +# CONFIG_PKG_USING_MCURSES is not set +# CONFIG_PKG_USING_TERMBOX is not set +# CONFIG_PKG_USING_VT100 is not set +# CONFIG_PKG_USING_QRCODE is not set +# CONFIG_PKG_USING_GUIENGINE is not set +# CONFIG_PKG_USING_PERSIMMON is not set +# CONFIG_PKG_USING_3GPP_AMRNB is not set +# end of multimedia packages + +# +# tools packages +# +# CONFIG_PKG_USING_CMBACKTRACE is not set +# CONFIG_PKG_USING_EASYFLASH is not set +# CONFIG_PKG_USING_EASYLOGGER is not set +# CONFIG_PKG_USING_SYSTEMVIEW is not set +# CONFIG_PKG_USING_SEGGER_RTT is not set +# CONFIG_PKG_USING_RTT_AUTO_EXE_CMD is not set +# CONFIG_PKG_USING_RDB is not set +# CONFIG_PKG_USING_ULOG_EASYFLASH is not set +# CONFIG_PKG_USING_LOGMGR is not set +# CONFIG_PKG_USING_ADBD is not set +# CONFIG_PKG_USING_COREMARK is not set +# CONFIG_PKG_USING_DHRYSTONE is not set +# CONFIG_PKG_USING_MEMORYPERF is not set +# CONFIG_PKG_USING_NR_MICRO_SHELL is not set +# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set +# CONFIG_PKG_USING_LUNAR_CALENDAR is not set +# CONFIG_PKG_USING_BS8116A is not set +# CONFIG_PKG_USING_GPS_RMC is not set +# CONFIG_PKG_USING_URLENCODE is not set +# CONFIG_PKG_USING_UMCN is not set +# CONFIG_PKG_USING_LWRB2RTT is not set +# CONFIG_PKG_USING_CPU_USAGE is not set +# CONFIG_PKG_USING_GBK2UTF8 is not set +# CONFIG_PKG_USING_VCONSOLE is not set +# CONFIG_PKG_USING_KDB is not set +# CONFIG_PKG_USING_WAMR is not set +# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set +# CONFIG_PKG_USING_LWLOG is not set +# CONFIG_PKG_USING_ANV_TRACE is not set +# CONFIG_PKG_USING_ANV_MEMLEAK is not set +# CONFIG_PKG_USING_ANV_TESTSUIT is not set +# CONFIG_PKG_USING_ANV_BENCH is not set +# CONFIG_PKG_USING_DEVMEM is not set +# CONFIG_PKG_USING_REGEX is not set +# CONFIG_PKG_USING_MEM_SANDBOX is not set +# CONFIG_PKG_USING_SOLAR_TERMS is not set +# CONFIG_PKG_USING_GAN_ZHI is not set +# CONFIG_PKG_USING_FDT is not set +# CONFIG_PKG_USING_CBOX is not set +# CONFIG_PKG_USING_SNOWFLAKE is not set +# CONFIG_PKG_USING_HASH_MATCH is not set +# CONFIG_PKG_USING_ARMV7M_DWT_TOOL is not set +# CONFIG_PKG_USING_VOFA_PLUS is not set +# CONFIG_PKG_USING_RT_TRACE is not set +# CONFIG_PKG_USING_ZDEBUG is not set +# end of tools packages + +# +# system packages +# + +# +# enhanced kernel services +# +# CONFIG_PKG_USING_RT_MEMCPY_CM is not set +# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set +# CONFIG_PKG_USING_RT_VSNPRINTF_FULL is not set +# end of enhanced kernel services + +# CONFIG_PKG_USING_AUNITY is not set + +# +# acceleration: Assembly language or algorithmic acceleration packages +# +# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set +# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set +# CONFIG_PKG_USING_QFPLIB_M3 is not set +# end of acceleration: Assembly language or algorithmic acceleration packages + +# +# CMSIS: ARM Cortex-M Microcontroller Software Interface Standard +# +# CONFIG_PKG_USING_CMSIS_5 is not set +# CONFIG_PKG_USING_CMSIS_CORE is not set +# CONFIG_PKG_USING_CMSIS_DSP is not set +# CONFIG_PKG_USING_CMSIS_NN is not set +# CONFIG_PKG_USING_CMSIS_RTOS1 is not set +# CONFIG_PKG_USING_CMSIS_RTOS2 is not set +# end of CMSIS: ARM Cortex-M Microcontroller Software Interface Standard + +# +# Micrium: Micrium software products porting for RT-Thread +# +# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set +# CONFIG_PKG_USING_UCOSII_WRAPPER is not set +# CONFIG_PKG_USING_UC_CRC is not set +# CONFIG_PKG_USING_UC_CLK is not set +# CONFIG_PKG_USING_UC_COMMON is not set +# CONFIG_PKG_USING_UC_MODBUS is not set +# end of Micrium: Micrium software products porting for RT-Thread + +# CONFIG_PKG_USING_FREERTOS_WRAPPER is not set +# CONFIG_PKG_USING_LITEOS_SDK is not set +# CONFIG_PKG_USING_TZ_DATABASE is not set +# CONFIG_PKG_USING_CAIRO is not set +# CONFIG_PKG_USING_PIXMAN is not set +# CONFIG_PKG_USING_PARTITION is not set +# CONFIG_PKG_USING_PERF_COUNTER is not set +# CONFIG_PKG_USING_FILEX is not set +# CONFIG_PKG_USING_LEVELX is not set +# CONFIG_PKG_USING_FLASHDB is not set +# CONFIG_PKG_USING_SQLITE is not set +# CONFIG_PKG_USING_RTI is not set +# CONFIG_PKG_USING_DFS_YAFFS is not set +# CONFIG_PKG_USING_LITTLEFS is not set +# CONFIG_PKG_USING_DFS_JFFS2 is not set +# CONFIG_PKG_USING_DFS_UFFS is not set +# CONFIG_PKG_USING_LWEXT4 is not set +# CONFIG_PKG_USING_THREAD_POOL is not set +# CONFIG_PKG_USING_ROBOTS is not set +# CONFIG_PKG_USING_EV is not set +# CONFIG_PKG_USING_SYSWATCH is not set +# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set +# CONFIG_PKG_USING_PLCCORE is not set +# CONFIG_PKG_USING_RAMDISK is not set +# CONFIG_PKG_USING_MININI is not set +# CONFIG_PKG_USING_QBOOT is not set +# CONFIG_PKG_USING_PPOOL is not set +# CONFIG_PKG_USING_OPENAMP is not set +# CONFIG_PKG_USING_RPMSG_LITE is not set +# CONFIG_PKG_USING_LPM is not set +# CONFIG_PKG_USING_TLSF is not set +# CONFIG_PKG_USING_EVENT_RECORDER is not set +# CONFIG_PKG_USING_ARM_2D is not set +# CONFIG_PKG_USING_MCUBOOT is not set +# CONFIG_PKG_USING_TINYUSB is not set +# CONFIG_PKG_USING_CHERRYUSB is not set +# CONFIG_PKG_USING_KMULTI_RTIMER is not set +# CONFIG_PKG_USING_TFDB is not set +# CONFIG_PKG_USING_QPC is not set +# CONFIG_PKG_USING_AGILE_UPGRADE is not set +# CONFIG_PKG_USING_FLASH_BLOB is not set +# CONFIG_PKG_USING_MLIBC is not set +# CONFIG_PKG_USING_TASK_MSG_BUS is not set +# CONFIG_PKG_USING_SFDB is not set +# CONFIG_PKG_USING_RTP is not set +# CONFIG_PKG_USING_REB is not set +# CONFIG_PKG_USING_R_RHEALSTONE is not set +# end of system packages + +# +# peripheral libraries and drivers +# + +# +# HAL & SDK Drivers +# + +# +# STM32 HAL & SDK Drivers +# +# CONFIG_PKG_USING_STM32L4_HAL_DRIVER is not set +# CONFIG_PKG_USING_STM32L4_CMSIS_DRIVER is not set +# CONFIG_PKG_USING_STM32WB55_SDK is not set +# CONFIG_PKG_USING_STM32_SDIO is not set +# end of STM32 HAL & SDK Drivers + +# +# Infineon HAL Packages +# +# CONFIG_PKG_USING_INFINEON_CAT1CM0P is not set +# CONFIG_PKG_USING_INFINEON_CMSIS is not set +# CONFIG_PKG_USING_INFINEON_CORE_LIB is not set +# CONFIG_PKG_USING_INFINEON_MTB_HAL_CAT1 is not set +# CONFIG_PKG_USING_INFINEON_MTB_PDL_CAT1 is not set +# CONFIG_PKG_USING_INFINEON_RETARGET_IO is not set +# CONFIG_PKG_USING_INFINEON_CAPSENSE is not set +# CONFIG_PKG_USING_INFINEON_CSDIDAC is not set +# CONFIG_PKG_USING_INFINEON_SERIAL_FLASH is not set +# CONFIG_PKG_USING_INFINEON_USBDEV is not set +# end of Infineon HAL Packages + +# CONFIG_PKG_USING_BLUETRUM_SDK is not set +# CONFIG_PKG_USING_EMBARC_BSP is not set +# CONFIG_PKG_USING_ESP_IDF is not set + +# +# Kendryte SDK +# +# CONFIG_PKG_USING_K210_SDK is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set +# end of Kendryte SDK + +# CONFIG_PKG_USING_NRF5X_SDK is not set +# CONFIG_PKG_USING_NRFX is not set +# CONFIG_PKG_USING_RASPBERRYPI_PICO_SDK is not set +# end of HAL & SDK Drivers + +# +# sensors drivers +# +# CONFIG_PKG_USING_LSM6DSM is not set +# CONFIG_PKG_USING_LSM6DSL is not set +# CONFIG_PKG_USING_LPS22HB is not set +# CONFIG_PKG_USING_HTS221 is not set +# CONFIG_PKG_USING_LSM303AGR is not set +# CONFIG_PKG_USING_BME280 is not set +# CONFIG_PKG_USING_BME680 is not set +# CONFIG_PKG_USING_BMA400 is not set +# CONFIG_PKG_USING_BMI160_BMX160 is not set +# CONFIG_PKG_USING_SPL0601 is not set +# CONFIG_PKG_USING_MS5805 is not set +# CONFIG_PKG_USING_DA270 is not set +# CONFIG_PKG_USING_DF220 is not set +# CONFIG_PKG_USING_HSHCAL001 is not set +# CONFIG_PKG_USING_BH1750 is not set +# CONFIG_PKG_USING_MPU6XXX is not set +# CONFIG_PKG_USING_AHT10 is not set +# CONFIG_PKG_USING_AP3216C is not set +# CONFIG_PKG_USING_TSL4531 is not set +# CONFIG_PKG_USING_DS18B20 is not set +# CONFIG_PKG_USING_DHT11 is not set +# CONFIG_PKG_USING_DHTXX is not set +# CONFIG_PKG_USING_GY271 is not set +# CONFIG_PKG_USING_GP2Y10 is not set +# CONFIG_PKG_USING_SGP30 is not set +# CONFIG_PKG_USING_HDC1000 is not set +# CONFIG_PKG_USING_BMP180 is not set +# CONFIG_PKG_USING_BMP280 is not set +# CONFIG_PKG_USING_SHTC1 is not set +# CONFIG_PKG_USING_BMI088 is not set +# CONFIG_PKG_USING_HMC5883 is not set +# CONFIG_PKG_USING_MAX6675 is not set +# CONFIG_PKG_USING_TMP1075 is not set +# CONFIG_PKG_USING_SR04 is not set +# CONFIG_PKG_USING_CCS811 is not set +# CONFIG_PKG_USING_PMSXX is not set +# CONFIG_PKG_USING_RT3020 is not set +# CONFIG_PKG_USING_MLX90632 is not set +# CONFIG_PKG_USING_MLX90393 is not set +# CONFIG_PKG_USING_MLX90392 is not set +# CONFIG_PKG_USING_MLX90397 is not set +# CONFIG_PKG_USING_MS5611 is not set +# CONFIG_PKG_USING_MAX31865 is not set +# CONFIG_PKG_USING_VL53L0X is not set +# CONFIG_PKG_USING_INA260 is not set +# CONFIG_PKG_USING_MAX30102 is not set +# CONFIG_PKG_USING_INA226 is not set +# CONFIG_PKG_USING_LIS2DH12 is not set +# CONFIG_PKG_USING_HS300X is not set +# CONFIG_PKG_USING_ZMOD4410 is not set +# CONFIG_PKG_USING_ISL29035 is not set +# CONFIG_PKG_USING_MMC3680KJ is not set +# CONFIG_PKG_USING_QMP6989 is not set +# CONFIG_PKG_USING_BALANCE is not set +# CONFIG_PKG_USING_SHT2X is not set +# CONFIG_PKG_USING_SHT3X is not set +# CONFIG_PKG_USING_SHT4X is not set +# CONFIG_PKG_USING_AD7746 is not set +# CONFIG_PKG_USING_ADT74XX is not set +# CONFIG_PKG_USING_MAX17048 is not set +# CONFIG_PKG_USING_AS7341 is not set +# CONFIG_PKG_USING_CW2015 is not set +# CONFIG_PKG_USING_ICM20608 is not set +# CONFIG_PKG_USING_PAJ7620 is not set +# CONFIG_PKG_USING_STHS34PF80 is not set +# end of sensors drivers + +# +# touch drivers +# +# CONFIG_PKG_USING_GT9147 is not set +# CONFIG_PKG_USING_GT1151 is not set +# CONFIG_PKG_USING_GT917S is not set +# CONFIG_PKG_USING_GT911 is not set +# CONFIG_PKG_USING_FT6206 is not set +# CONFIG_PKG_USING_FT5426 is not set +# CONFIG_PKG_USING_FT6236 is not set +# CONFIG_PKG_USING_XPT2046_TOUCH is not set +# CONFIG_PKG_USING_CST816X is not set +# CONFIG_PKG_USING_CST812T is not set +# end of touch drivers + +# CONFIG_PKG_USING_REALTEK_AMEBA is not set +# CONFIG_PKG_USING_BUTTON is not set +# CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_SX12XX is not set +# CONFIG_PKG_USING_SIGNAL_LED is not set +# CONFIG_PKG_USING_LEDBLINK is not set +# CONFIG_PKG_USING_LITTLED is not set +# CONFIG_PKG_USING_LKDGUI is not set +# CONFIG_PKG_USING_INFRARED is not set +# CONFIG_PKG_USING_MULTI_INFRARED is not set +# CONFIG_PKG_USING_AGILE_BUTTON is not set +# CONFIG_PKG_USING_AGILE_LED is not set +# CONFIG_PKG_USING_AT24CXX is not set +# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set +# CONFIG_PKG_USING_PCA9685 is not set +# CONFIG_PKG_USING_ILI9341 is not set +# CONFIG_PKG_USING_I2C_TOOLS is not set +# CONFIG_PKG_USING_NRF24L01 is not set +# CONFIG_PKG_USING_RPLIDAR is not set +# CONFIG_PKG_USING_AS608 is not set +# CONFIG_PKG_USING_RC522 is not set +# CONFIG_PKG_USING_WS2812B is not set +# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set +# CONFIG_PKG_USING_MULTI_RTIMER is not set +# CONFIG_PKG_USING_MAX7219 is not set +# CONFIG_PKG_USING_BEEP is not set +# CONFIG_PKG_USING_EASYBLINK is not set +# CONFIG_PKG_USING_PMS_SERIES is not set +# CONFIG_PKG_USING_CAN_YMODEM is not set +# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set +# CONFIG_PKG_USING_QLED is not set +# CONFIG_PKG_USING_AGILE_CONSOLE is not set +# CONFIG_PKG_USING_LD3320 is not set +# CONFIG_PKG_USING_WK2124 is not set +# CONFIG_PKG_USING_LY68L6400 is not set +# CONFIG_PKG_USING_DM9051 is not set +# CONFIG_PKG_USING_SSD1306 is not set +# CONFIG_PKG_USING_GC9A01 is not set +# CONFIG_PKG_USING_QKEY is not set +# CONFIG_PKG_USING_RS485 is not set +# CONFIG_PKG_USING_RS232 is not set +# CONFIG_PKG_USING_NES is not set +# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set +# CONFIG_PKG_USING_VDEVICE is not set +# CONFIG_PKG_USING_SGM706 is not set +# CONFIG_PKG_USING_RDA58XX is not set +# CONFIG_PKG_USING_LIBNFC is not set +# CONFIG_PKG_USING_MFOC is not set +# CONFIG_PKG_USING_TMC51XX is not set +# CONFIG_PKG_USING_TCA9534 is not set +# CONFIG_PKG_USING_KOBUKI is not set +# CONFIG_PKG_USING_ROSSERIAL is not set +# CONFIG_PKG_USING_MICRO_ROS is not set +# CONFIG_PKG_USING_MCP23008 is not set +# CONFIG_PKG_USING_MISAKA_AT24CXX is not set +# CONFIG_PKG_USING_MISAKA_RGB_BLING is not set +# CONFIG_PKG_USING_LORA_MODEM_DRIVER is not set +# CONFIG_PKG_USING_SOFT_SERIAL is not set +# CONFIG_PKG_USING_MB85RS16 is not set +# CONFIG_PKG_USING_RFM300 is not set +# CONFIG_PKG_USING_IO_INPUT_FILTER is not set +# CONFIG_PKG_USING_LRF_NV7LIDAR is not set +# CONFIG_PKG_USING_AIP650 is not set +# CONFIG_PKG_USING_FINGERPRINT is not set +# CONFIG_PKG_USING_BT_ECB02C is not set +# CONFIG_PKG_USING_UAT is not set +# CONFIG_PKG_USING_ST7789 is not set +# CONFIG_PKG_USING_VS1003 is not set +# CONFIG_PKG_USING_X9555 is not set +# CONFIG_PKG_USING_SYSTEM_RUN_LED is not set +# CONFIG_PKG_USING_BT_MX01 is not set +# CONFIG_PKG_USING_RGPOWER is not set +# CONFIG_PKG_USING_SPI_TOOLS is not set +# end of peripheral libraries and drivers + +# +# AI packages +# +# CONFIG_PKG_USING_LIBANN is not set +# CONFIG_PKG_USING_NNOM is not set +# CONFIG_PKG_USING_ONNX_BACKEND is not set +# CONFIG_PKG_USING_ONNX_PARSER is not set +# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set +# CONFIG_PKG_USING_ELAPACK is not set +# CONFIG_PKG_USING_ULAPACK is not set +# CONFIG_PKG_USING_QUEST is not set +# CONFIG_PKG_USING_NAXOS is not set +# CONFIG_PKG_USING_R_TINYMAIX is not set +# end of AI packages + +# +# Signal Processing and Control Algorithm Packages +# +# CONFIG_PKG_USING_APID is not set +# CONFIG_PKG_USING_FIRE_PID_CURVE is not set +# CONFIG_PKG_USING_QPID is not set +# CONFIG_PKG_USING_UKAL is not set +# CONFIG_PKG_USING_DIGITALCTRL is not set +# CONFIG_PKG_USING_KISSFFT is not set +# end of Signal Processing and Control Algorithm Packages + +# +# miscellaneous packages +# + +# +# project laboratory +# +# end of project laboratory + +# +# samples: kernel and components samples +# +# CONFIG_PKG_USING_KERNEL_SAMPLES is not set +# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set +# CONFIG_PKG_USING_NETWORK_SAMPLES is not set +# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set +# end of samples: kernel and components samples + +# +# entertainment: terminal games and other interesting software packages +# +# CONFIG_PKG_USING_CMATRIX is not set +# CONFIG_PKG_USING_SL is not set +# CONFIG_PKG_USING_CAL is not set +# CONFIG_PKG_USING_ACLOCK is not set +# CONFIG_PKG_USING_THREES is not set +# CONFIG_PKG_USING_2048 is not set +# CONFIG_PKG_USING_SNAKE is not set +# CONFIG_PKG_USING_TETRIS is not set +# CONFIG_PKG_USING_DONUT is not set +# CONFIG_PKG_USING_COWSAY is not set +# CONFIG_PKG_USING_MORSE is not set +# CONFIG_PKG_USING_TINYSQUARE is not set +# end of entertainment: terminal games and other interesting software packages + +# CONFIG_PKG_USING_LIBCSV is not set +# CONFIG_PKG_USING_OPTPARSE is not set +# CONFIG_PKG_USING_FASTLZ is not set +# CONFIG_PKG_USING_MINILZO is not set +# CONFIG_PKG_USING_QUICKLZ is not set +# CONFIG_PKG_USING_LZMA is not set +# CONFIG_PKG_USING_RALARAM is not set +# CONFIG_PKG_USING_MULTIBUTTON is not set +# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set +# CONFIG_PKG_USING_CANFESTIVAL is not set +# CONFIG_PKG_USING_ZLIB is not set +# CONFIG_PKG_USING_MINIZIP is not set +# CONFIG_PKG_USING_HEATSHRINK is not set +# CONFIG_PKG_USING_DSTR is not set +# CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set +# CONFIG_PKG_USING_UPACKER is not set +# CONFIG_PKG_USING_UPARAM is not set +# CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set +# CONFIG_PKG_USING_KI is not set +# CONFIG_PKG_USING_ARMv7M_DWT is not set +# CONFIG_PKG_USING_CRCLIB is not set +# CONFIG_PKG_USING_LWGPS is not set +# CONFIG_PKG_USING_STATE_MACHINE is not set +# CONFIG_PKG_USING_DESIGN_PATTERN is not set +# CONFIG_PKG_USING_CONTROLLER is not set +# CONFIG_PKG_USING_PHASE_LOCKED_LOOP is not set +# CONFIG_PKG_USING_MFBD is not set +# CONFIG_PKG_USING_SLCAN2RTT is not set +# CONFIG_PKG_USING_SOEM is not set +# CONFIG_PKG_USING_QPARAM is not set +# CONFIG_PKG_USING_CorevMCU_CLI is not set +# CONFIG_PKG_USING_GET_IRQ_PRIORITY is not set +# end of miscellaneous packages + +# +# Arduino libraries +# +# CONFIG_PKG_USING_RTDUINO is not set + +# +# Projects and Demos +# +# CONFIG_PKG_USING_ARDUINO_MSGQ_C_CPP_DEMO is not set +# CONFIG_PKG_USING_ARDUINO_SKETCH_LOADER_DEMO is not set +# CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set +# CONFIG_PKG_USING_ARDUINO_NINEINONE_SENSOR_SHIELD is not set +# CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set +# CONFIG_PKG_USING_ARDUINO_MATLAB_SUPPORT is not set +# end of Projects and Demos + +# +# Sensors +# +# CONFIG_PKG_USING_ARDUINO_SENSOR_DEVICE_DRIVERS is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSOR is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSORLAB is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL375 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL53L0X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL53L1X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL6180X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31855 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31865 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31856 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX6675 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90614 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM9DS1 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AHTX0 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM9DS0 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP280 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADT7410 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP085 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BME680 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP9808 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP4728 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_INA219 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LTR390 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL345 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DHT is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP9600 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM6DS is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO055 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX1704X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MMC56X3 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90393 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90395 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ICM20X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DPS310 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTS221 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHT4X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHT31 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL343 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BME280 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AS726X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AMG88XX is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AM2320 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AM2315 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LTR329_LTR303 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP085_UNIFIED is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP183 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP183_UNIFIED is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP3XX is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MS8607 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS3MDL is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90640 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MMA8451 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MSA301 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPL115A2 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO08X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO08X_RVC is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS2MDL is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM303DLH_MAG is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LC709203F is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_CAP1188 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_CCS811 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_NAU7802 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS331 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LPS2X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LPS35HW is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM303_ACCEL is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS3DH is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCF8591 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPL3115A2 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPR121 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPRLS is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPU6050 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCT2075 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PM25AQI is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_EMC2101 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_FXAS21002C is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SCD30 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_FXOS8700 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HMC5883_UNIFIED is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SGP30 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP006 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TLA202X is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TCS34725 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI7021 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI1145 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SGP40 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHTC3 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HDC1000 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTU21DF is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AS7341 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTU31D is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_INA260 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP007_LIBRARY is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_L3GD20 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP117 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSC2007 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSL2561 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSL2591_LIBRARY is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VCNL4040 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML6070 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML6075 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML7700 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LIS3DHTR is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_DHT is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_ADXL335 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_ADXL345 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_BME280 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_BMP280 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_H3LIS331DL is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_MMA7660 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_TSL2561 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_PAJ7620 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_VL53L0X is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_ITG3200 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_SHT31 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_HP20X is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_DRV2605L is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_BBM150 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_HMC5883L is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LSM303DLH is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_TCS3414CS is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_MP503 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_BMP085 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_HIGHTEMP is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_VEML6070 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_SI1145 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_SHT35 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_AT42QT1070 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LSM6DS3 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_HDC1000 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_HM3301 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_MCP9600 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LTC2941 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_LDC1612 is not set +# CONFIG_PKG_USING_ARDUINO_CAPACITIVESENSOR is not set +# CONFIG_PKG_USING_ARDUINO_JARZEBSKI_MPU6050 is not set +# end of Sensors + +# +# Display +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_GFX_LIBRARY is not set +# CONFIG_PKG_USING_ARDUINO_U8G2 is not set +# CONFIG_PKG_USING_ARDUINO_TFT_ESPI is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ST7735 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SSD1306 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ILI9341 is not set +# CONFIG_PKG_USING_SEEED_TM1637 is not set +# end of Display + +# +# Timing +# +# CONFIG_PKG_USING_ARDUINO_RTCLIB is not set +# CONFIG_PKG_USING_ARDUINO_MSTIMER2 is not set +# CONFIG_PKG_USING_ARDUINO_TICKER is not set +# CONFIG_PKG_USING_ARDUINO_TASKSCHEDULER is not set +# end of Timing + +# +# Data Processing +# +# CONFIG_PKG_USING_ARDUINO_KALMANFILTER is not set +# CONFIG_PKG_USING_ARDUINO_ARDUINOJSON is not set +# CONFIG_PKG_USING_ARDUINO_TENSORFLOW_LITE_MICRO is not set +# CONFIG_PKG_USING_ARDUINO_RUNNINGMEDIAN is not set +# end of Data Processing + +# +# Data Storage +# + +# +# Communication +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PN532 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI4713 is not set +# end of Communication + +# +# Device Control +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCF8574 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCA9685 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TPA2016 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DRV2605 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DS1841 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DS3502 is not set +# CONFIG_PKG_USING_ARDUINO_SEEED_PCF85063TP is not set +# end of Device Control + +# +# Other +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MFRC630 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI5351 is not set +# end of Other + +# +# Signal IO +# +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BUSIO is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TCA8418 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP23017 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADS1X15 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AW9523 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP3008 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP4725 is not set +# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BD3491FS is not set +# end of Signal IO + +# +# Uncategorized +# +# end of Arduino libraries +# end of RT-Thread online packages + +CONFIG_SOC_FAMILY_STM32=y +CONFIG_SOC_SERIES_STM32H7=y +CONFIG_BOARD_SERIES_STM32_NUCLEO_144=y + +# +# Hardware Drivers Config +# + +# +# Onboard Peripheral Drivers +# + +# +# On-chip Peripheral Drivers +# +CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y +CONFIG_BSP_USING_UART3=y +# CONFIG_BSP_USING_CRC is not set +# CONFIG_BSP_USING_RNG is not set +# CONFIG_BSP_USING_UDID is not set +# end of On-chip Peripheral Drivers + +# +# Board extended module Drivers +# +# end of Hardware Drivers Config diff --git a/bsp/stm32/stm32h723-st-nucleo/.gitignore b/bsp/stm32/stm32h723-st-nucleo/.gitignore new file mode 100644 index 00000000000..7221bde019d --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/.gitignore @@ -0,0 +1,42 @@ +*.pyc +*.map +*.dblite +*.elf +*.bin +*.hex +*.axf +*.exe +*.pdb +*.idb +*.ilk +*.old +build +Debug +documentation/html +packages/ +*~ +*.o +*.obj +*.out +*.bak +*.dep +*.lib +*.i +*.d +.DS_Stor* +.config 3 +.config 4 +.config 5 +Midea-X1 +*.uimg +GPATH +GRTAGS +GTAGS +.vscode +JLinkLog.txt +JLinkSettings.ini +DebugConfig/ +RTE/ +settings/ +*.uvguix* +cconfig.h diff --git a/bsp/stm32/stm32h723-st-nucleo/Kconfig b/bsp/stm32/stm32h723-st-nucleo/Kconfig new file mode 100644 index 00000000000..3ecf4bf51e1 --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/Kconfig @@ -0,0 +1,27 @@ +mainmenu "RT-Thread Configuration" + +BSP_DIR := . + +RTT_DIR := ../../.. + +PKGS_DIR := packages + +config SOC_STM32H723ZG + bool + select SOC_SERIES_STM32H7 + select RT_USING_COMPONENTS_INIT + select RT_USING_USER_MAIN + default y + +config BOARD_STM32H723_NUCLEO + bool + select BOARD_SERIES_STM32_NUCLEO_144 + default y + +source "$(RTT_DIR)/Kconfig" +osource "$PKGS_DIR/Kconfig" +rsource "../libraries/Kconfig" + +if !RT_USING_NANO +rsource "board/Kconfig" +endif diff --git a/bsp/stm32/stm32h723-st-nucleo/README.md b/bsp/stm32/stm32h723-st-nucleo/README.md new file mode 100644 index 00000000000..f5bf627ac8f --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/README.md @@ -0,0 +1,92 @@ +# STM32H723-Nucleo BSP Introduction + +[中文](README_zh.md) + +### Description + +STM32H723xE/G devices are based on the high-performance Arm® Cortex®-M7 32-bit RISC core operating at up to 550 MHz. The Cortex® -M7 core features a floating-point unit (FPU) which supports Arm® double-precision (IEEE 754 compliant) and single-precision data-processing instructions and data types. The Cortex -M7 core includes 32 Kbytes of instruction cache and 32 Kbytes of data cache. STM32H723xE/G devices support a full set of DSP instructions and a memory protection unit (MPU) to enhance application security. + +STM32H723xE/G devices incorporate high-speed embedded memories with up to 1 Mbyte of flash memory, up to 564 Kbytes of RAM (including 192 Kbytes that can be shared between ITCM and AXI, plus 64 Kbytes exclusively ITCM, plus 128 Kbytes exclusively AXI, 128 Kbyte DTCM, 48 Kbytes AHB and 4 Kbytes of backup RAM), as well as an extensive range of enhanced I/Os and peripherals connected to APB buses, AHB buses, 2x32-bit multi-AHB bus matrix and a multilayer AXI interconnect supporting internal and external memory access. To improve application robustness, all memories feature error code correction (one error correction, two error detections). + +The devices embed peripherals allowing mathematical/arithmetic function acceleration (CORDIC coprocessor for trigonometric functions and FMAC unit for filter functions). All the devices offer three ADCs, two DACs, two operational amplifiers, two ultra-low-power comparators, a low-power RTC, four general-purpose 32-bit timers, 12 general-purpose 16-bit timers including two PWM timers for motor control, five low-power timers, a true random number generator (RNG). The devices support four digital filters for external sigma-delta modulators (DFSDM). They also feature standard and advanced communication interfaces. + +### All features + +- Includes ST state-of-the-art patented technology +- Core + - 32-bit Arm® Cortex®-M7 CPU with DP-FPU, L1 cache: 32-Kbyte data cache and 32-Kbyte instruction cache allowing 0-wait state execution from embedded flash memory and external memories, frequency up to 550 MHz, MPU, 1177 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions +- Memories + - Up to 1 Mbyte of embedded flash memory with ECC + - SRAM: total 564 Kbytes all with ECC, including 128 Kbytes of data TCM RAM for critical real-time data + 432 Kbytes of system RAM (up to 256 Kbytes can remap on instruction TCM RAM for critical real time instructions) + 4 Kbytes of backup SRAM (available in the lowest-power modes) + - Flexible external memory controller with up to 16-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND memories + - 2 x Octo-SPI interface with XiP + - 2 x SD/SDIO/MMC interface + - Bootloader +- Graphics + - Chrom-ART Accelerator graphical hardware accelerator enabling enhanced graphical user interface to reduce CPU load + - LCD-TFT controller supporting up to XGA resolution +- Clock, reset and supply management + - 1.62 V to 3.6 V application supply and I/O + - POR, PDR, PVD and BOR + - Dedicated USB power + - Embedded LDO regulator + - Internal oscillators: 64 MHz HSI, 48 MHz HSI48, 4 MHz CSI, 32 kHz LSI + - External oscillators: 4-50 MHz HSE, 32.768 kHz LSE +- Low power + - Sleep, Stop and Standby modes + - VBAT supply for RTC, 32×32-bit backup registers +- Analog + - 2×16-bit ADC, up to 3.6 MSPS in 16-bit: up to 18 channels and 7.2 MSPS in double-interleaved mode + - 1 x 12-bit ADC, up to 5 MSPS in 12-bit, up to 12 channels + - 2 x comparators + - 2 x operational amplifier GBW = 8 MHz + - 2× 12-bit D/A converters +- Digital filters for sigma delta modulator (DFSDM) + - 8 channels/4 filters +- 4 DMA controllers to offload the CPU + - 1 × MDMA with linked list support + - 2 × dual-port DMAs with FIFO + - 1 × basic DMA with request router capabilities +- 24 timers + - Seventeen 16-bit (including 5 x low power 16-bit timer available in stop mode) and four 32-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input + - 2x watchdogs, 1x SysTick timer +- Debug mode + - SWD and JTAG interfaces + - 2-Kbyte embedded trace buffer + +- Up to 114 I/O ports with interrupt capability +- Up to 35 communication interfaces + - Up to 5 × I2C FM+ interfaces (SMBus/PMBus™) + - Up to 5 USARTs/5 UARTs (ISO7816 interface, LIN, IrDA, modem control) and 1 x LPUART + - Up to 6 SPIs with 4 with muxed duplex I2S for audio class accuracy via internal audio PLL or external clock and up to 5 x SPI (from 5 x USART when configured in synchronous mode) + - 2x SAI (serial audio interface) + - 1× FD/TT-CAN and 2x FD-CAN + - 8- to 14-bit camera interface + - 16-bit parallel slave synchronous interface + - SPDIF-IN interface + - HDMI-CEC + - Ethernet MAC interface with DMA controller + - USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip FS PHY and ULPI for external HS PHY + - SWPMI single-wire protocol master I/F + - MDIO slave interface +- Mathematical acceleration + - CORDIC for trigonometric functions acceleration + - FMAC: Filter mathematical accelerator +- Digital temperature sensor +- True random number generator +- CRC calculation unit +- RTC with subsecond accuracy and hardware calendar +- ROP, PC-ROP, tamper detection +- 96-bit unique ID +- All packages are ECOPACK2 compliant + +## Read more + +| Documents | Description | +| :----------------------------------------------------------: | :----------------------------------------------------------: | +| [STM32_Nucleo-144_BSP_Introduction](../docs/STM32_Nucleo-144_BSP_Introduction.md) | How to run RT-Thread on STM32 Nucleo-144 boards (**Must-Read**) | +| [STM32H723ZG ST Official Website](https://www.st.com/en/microcontrollers-microprocessors/stm32h723zg.html#documentation) | STM32H723ZG datasheet and other resources | + +## Maintained By + +[hywing](https://github.com/hywing) \ No newline at end of file diff --git a/bsp/stm32/stm32h723-st-nucleo/README_zh.md b/bsp/stm32/stm32h723-st-nucleo/README_zh.md new file mode 100644 index 00000000000..928cc0c4c92 --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/README_zh.md @@ -0,0 +1,111 @@ +# STM32H723-st-nucleo 开发板 BSP 说明 + +## 简介 + +本文档为 hywing为 STM32H723-st-nucleo 开发板提供的 BSP (板级支持包) 说明。 + +主要内容如下： + +- 开发板资源介绍 +- BSP 快速上手 +- 进阶使用方法 + +通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。 + +## 开发板介绍 + +STM32H723 是 ST 推出的一款基于 ARM Cortex-M7 内核的开发板，最高主频为 550Mhz，该开发板具有丰富的板载资源，可以充分发挥 STM32H723 的芯片性能。 + +开发板外观如下图所示： + +![board](figures/board.png) + +该开发板常用 **板载资源** 如下： + +- MCU：STM32H723，主频550MHz，1MB FLASH ，564K RAM +- 常用接口：USB转串口、以太网接口、USB接口 +- 调试接口，标准 JTAG/SWD + +开发板更多详细信息请参考[STM32H723](https://www.st.com/en/evaluation-tools/nucleo-h723zg.html)。 + +## 外设支持 + +本 BSP 目前对外设的支持情况如下： + +| **板载外设** | **支持情况** | **备注** | +| :----------------- | :----------: | :------------------------------------- | +| USB 转串口 | 支持 | +| **片上外设** | **支持情况** | **备注** | +| GPIO | 支持 | | +| UART | 支持 | UART3 | + + +## 使用说明 + +使用说明分为如下两个章节： + +- 快速上手 + + 本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。 + +- 进阶使用 + + 本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。 + + +### 快速上手 + +本 BSP 为开发者提供 MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。 + +#### 硬件连接 + +使用数据线连接开发板到 PC，打开电源开关。 + +#### 编译下载 + +双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。 + +> 工程默认配置使用 ST_LINK 仿真器下载程序，在通过 ST_LINK 连接开发板的基础上，点击下载按钮即可下载程序到开发板 + +#### 运行结果 + +下载程序成功之后，系统会自动运行，LED循环点亮。 + +连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息: + +```bash + + \ | / +- RT - Thread Operating System + / | \ 5.2.0 build Dec 2 2024 11:35:30 + 2006 - 2024 Copyright by RT-Thread team + +msh > +``` +### 进阶使用 + +此 BSP 默认只开启了 GPIO 和 串口3 的功能，如果需使用更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下： + +1. 在 bsp 下打开 env 工具。 + +2. 输入`menuconfig`命令配置工程，配置好之后保存退出。 + +3. 输入`pkgs --update`命令更新软件包。 + +4. 输入`scons --target=mdk5` 命令重新生成工程。 + +本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。 + +## 注意事项 + +- 调试串口为串口3 映射说明 + + PD8 ------> USART3_TX + + PD9 ------> USART3_RX + +## 联系人信息 + +维护人: + +- [hywing](https://github.com/hywing) \ No newline at end of file diff --git a/bsp/stm32/stm32h723-st-nucleo/SConscript b/bsp/stm32/stm32h723-st-nucleo/SConscript new file mode 100644 index 00000000000..c7ef7659ece --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/SConscript @@ -0,0 +1,14 @@ +# for module compiling +import os +from building import * + +cwd = GetCurrentDir() +objs = [] +list = os.listdir(cwd) + +for d in list: + path = os.path.join(cwd, d) + if os.path.isfile(os.path.join(path, 'SConscript')): + objs = objs + SConscript(os.path.join(d, 'SConscript')) + +Return('objs') diff --git a/bsp/stm32/stm32h723-st-nucleo/SConstruct b/bsp/stm32/stm32h723-st-nucleo/SConstruct new file mode 100644 index 00000000000..02c0e78cd2d --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/SConstruct @@ -0,0 +1,60 @@ +import os +import sys +import rtconfig + +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') +else: + RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..') + +sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')] +try: + from building import * +except: + print('Cannot found RT-Thread root directory, please check RTT_ROOT') + print(RTT_ROOT) + exit(-1) + +TARGET = 'rt-thread.' + rtconfig.TARGET_EXT + +DefaultEnvironment(tools=[]) +env = Environment(tools = ['mingw'], + AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS, + CC = rtconfig.CC, CFLAGS = rtconfig.CFLAGS, + AR = rtconfig.AR, ARFLAGS = '-rc', + CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS, + LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS) +env.PrependENVPath('PATH', rtconfig.EXEC_PATH) + +if rtconfig.PLATFORM in ['iccarm']: + env.Replace(CCCOM = ['$CC $CFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES']) + env.Replace(ARFLAGS = ['']) + env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map') + +Export('RTT_ROOT') +Export('rtconfig') + +SDK_ROOT = os.path.abspath('./') + +if os.path.exists(SDK_ROOT + '/libraries'): + libraries_path_prefix = SDK_ROOT + '/libraries' +else: + libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries' + +SDK_LIB = libraries_path_prefix +Export('SDK_LIB') + +# prepare building environment +objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False) + +stm32_library = 'STM32H7xx_HAL' +rtconfig.BSP_LIBRARY_TYPE = stm32_library + +# include drivers +objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript'))) + +# include libraries +objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript'))) + +# make a building +DoBuilding(TARGET, objs) diff --git a/bsp/stm32/stm32h723-st-nucleo/applications/SConscript b/bsp/stm32/stm32h723-st-nucleo/applications/SConscript new file mode 100644 index 00000000000..9bb9abae897 --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/applications/SConscript @@ -0,0 +1,15 @@ +from building import * +import os + +cwd = GetCurrentDir() +src = Glob('*.c') +CPPPATH = [cwd] + +group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH) + +list = os.listdir(cwd) +for item in list: + if os.path.isfile(os.path.join(cwd, item, 'SConscript')): + group = group + SConscript(os.path.join(item, 'SConscript')) + +Return('group') diff --git a/bsp/stm32/stm32h723-st-nucleo/applications/main.c b/bsp/stm32/stm32h723-st-nucleo/applications/main.c new file mode 100644 index 00000000000..82f61fe140e --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/applications/main.c @@ -0,0 +1,60 @@ +/* + * Copyright (c) 2006-2024 RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2024-11-25 hywing first version + */ + +#include +#include +#include + +#define LED0_PIN GET_PIN(B, 0) +#define LED1_PIN GET_PIN(E, 1) +#define LED2_PIN GET_PIN(B, 14) +#define USER_KEY GET_PIN(C, 13) +#define DELAY 500 + +void irq_callback(void *arg) +{ + if(rt_pin_read(USER_KEY) == 1) + { + rt_kprintf("Key pressed!\r\n"); + } +} + +int main(void) +{ + /* set GPIO pin mode to output */ + rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT); + rt_pin_mode(LED1_PIN, PIN_MODE_OUTPUT); + rt_pin_mode(LED2_PIN, PIN_MODE_OUTPUT); + rt_pin_mode(USER_KEY, PIN_MODE_INPUT_PULLDOWN); + rt_pin_attach_irq(USER_KEY, PIN_IRQ_MODE_RISING, irq_callback, RT_NULL); + rt_pin_irq_enable(USER_KEY, PIN_IRQ_ENABLE); + + rt_kprintf("Welcome to the world of IoT Stuff!\r\n"); + + while (1) + { + rt_pin_write(LED0_PIN, PIN_HIGH); + rt_pin_write(LED1_PIN, PIN_LOW); + rt_pin_write(LED2_PIN, PIN_LOW); + rt_thread_mdelay(DELAY); + rt_pin_write(LED0_PIN, PIN_LOW); + rt_pin_write(LED1_PIN, PIN_HIGH); + rt_pin_write(LED2_PIN, PIN_LOW); + rt_thread_mdelay(DELAY); + rt_pin_write(LED0_PIN, PIN_LOW); + rt_pin_write(LED1_PIN, PIN_LOW); + rt_pin_write(LED2_PIN, PIN_HIGH); + rt_thread_mdelay(DELAY); + rt_pin_write(LED0_PIN, PIN_LOW); + rt_pin_write(LED1_PIN, PIN_HIGH); + rt_pin_write(LED2_PIN, PIN_LOW); + rt_thread_mdelay(DELAY); + } +} diff --git a/bsp/stm32/stm32h723-st-nucleo/board/.ignore_format.yml b/bsp/stm32/stm32h723-st-nucleo/board/.ignore_format.yml new file mode 100644 index 00000000000..0d7f3e360c6 --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/board/.ignore_format.yml @@ -0,0 +1,6 @@ +# files format check exclude path, please follow the instructions below to modify; +# If you need to exclude an entire folder, add the folder path in dir_path; +# If you need to exclude a file, add the path to the file in file_path. + +dir_path: +- CubeMX_Config diff --git a/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/.mxproject new file mode 100644 index 00000000000..9c1b6e06e2d --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/.mxproject @@ -0,0 +1,14 @@ +[PreviousLibFiles] +LibFiles=Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_utils.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dmamux.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_mdma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_def.h;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_lpuart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart_ex.h;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_cortex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_rcc_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_bus.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_rcc.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_crs.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_system.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_utils.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_flash_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_gpio_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_gpio.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_hsem.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_dma_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_dmamux.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_mdma.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_pwr_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_pwr.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_def.h;Drivers\STM32H7xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_i2c_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_exti.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_tim_ex.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_usart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_ll_lpuart.h;Drivers\STM32H7xx_HAL_Driver\Inc\stm32h7xx_hal_uart_ex.h;Drivers\CMSIS\Device\ST\STM32H7xx\Include\stm32h723xx.h;Drivers\CMSIS\Device\ST\STM32H7xx\Include\stm32h7xx.h;Drivers\CMSIS\Device\ST\STM32H7xx\Include\system_stm32h7xx.h;Drivers\CMSIS\Device\ST\STM32H7xx\Include\system_stm32h7xx.h;Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx.c;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\tz_context.h; + +[PreviousUsedKeilFiles] +SourceFiles=..\Src\main.c;..\Src\stm32h7xx_it.c;..\Src\stm32h7xx_hal_msp.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;..\Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx.c;..\\Src\system_stm32h7xx.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_flash_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_hsem.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_i2c_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_exti.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_tim_ex.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c;..\Drivers\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c;..\Drivers\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx.c;..\\Src\system_stm32h7xx.c;;; +HeaderPath=..\Drivers\STM32H7xx_HAL_Driver\Inc;..\Drivers\STM32H7xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32H7xx\Include;..\Drivers\CMSIS\Include;..\Inc; +CDefines=USE_HAL_DRIVER;STM32H723xx;USE_HAL_DRIVER;USE_HAL_DRIVER; + +[PreviousGenFiles] +HeaderPath=..\Inc +HeaderFiles=stm32h7xx_it.h;stm32h7xx_hal_conf.h;main.h; +SourcePath=..\Src +SourceFiles=stm32h7xx_it.c;stm32h7xx_hal_msp.c;main.c; + diff --git a/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc new file mode 100644 index 00000000000..8f58e75e443 --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc @@ -0,0 +1,157 @@ +#MicroXplorer Configuration settings - do not modify +CAD.formats= +CAD.pinconfig= +CAD.provider= +File.Version=6 +GPIO.groupedBy=Group By Peripherals +KeepUserPlacement=false +MMTAppRegionsCount=0 +MMTConfigApplied=false +Mcu.CPN=STM32H723ZGT6 +Mcu.Family=STM32H7 +Mcu.IP0=CORTEX_M7 +Mcu.IP1=MEMORYMAP +Mcu.IP2=NVIC +Mcu.IP3=RCC +Mcu.IP4=SYS +Mcu.IP5=USART3 +Mcu.IPNb=6 +Mcu.Name=STM32H723ZGTx +Mcu.Package=LQFP144 +Mcu.Pin0=PH0-OSC_IN +Mcu.Pin1=PH1-OSC_OUT +Mcu.Pin2=PD8 +Mcu.Pin3=PD9 +Mcu.Pin4=VP_SYS_VS_Systick +Mcu.Pin5=VP_MEMORYMAP_VS_MEMORYMAP +Mcu.PinsNb=6 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32H723ZGTx +MxCube.Version=6.12.1 +MxDb.Version=DB.6.0.121 +NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.ForceEnableDMAVector=true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:false +NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false +PD8.Locked=true +PD8.Mode=Asynchronous +PD8.Signal=USART3_TX +PD9.Locked=true +PD9.Mode=Asynchronous +PD9.Signal=USART3_RX +PH0-OSC_IN.Mode=HSE-External-Oscillator +PH0-OSC_IN.Signal=RCC_OSC_IN +PH1-OSC_OUT.Mode=HSE-External-Oscillator +PH1-OSC_OUT.Signal=RCC_OSC_OUT +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32H723ZGTx +ProjectManager.FirmwarePackage=STM32Cube FW_H7 V1.11.2 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=0 +ProjectManager.MainLocation=Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain= +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=CubeMX_Config.ioc +ProjectManager.ProjectName=CubeMX_Config +ProjectManager.ProjectStructure= +ProjectManager.RegisterCallBack= +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=MDK-ARM V5 +ProjectManager.ToolChainLocation= +ProjectManager.UAScriptAfterPath= +ProjectManager.UAScriptBeforePath= +ProjectManager.UnderRoot=false +ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_USART3_UART_Init-USART3-false-HAL-true,0-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true +RCC.ADCFreq_Value=129000000 +RCC.AHB12Freq_Value=64000000 +RCC.AHB4Freq_Value=64000000 +RCC.APB1Freq_Value=32000000 +RCC.APB2Freq_Value=64000000 +RCC.APB3Freq_Value=64000000 +RCC.APB4Freq_Value=64000000 +RCC.AXIClockFreq_Value=64000000 +RCC.CECFreq_Value=32000 +RCC.CKPERFreq_Value=64000000 +RCC.CortexFreq_Value=64000000 +RCC.CpuClockFreq_Value=64000000 +RCC.D1CPREFreq_Value=64000000 +RCC.D2PPRE1=RCC_APB1_DIV2 +RCC.DFSDMACLkFreq_Value=129000000 +RCC.DFSDMFreq_Value=64000000 +RCC.DIVP1Freq_Value=129000000 +RCC.DIVP2Freq_Value=129000000 +RCC.DIVP3Freq_Value=129000000 +RCC.DIVQ1Freq_Value=129000000 +RCC.DIVQ2Freq_Value=129000000 +RCC.DIVQ3Freq_Value=129000000 +RCC.DIVR1Freq_Value=129000000 +RCC.DIVR2Freq_Value=129000000 +RCC.DIVR3Freq_Value=129000000 +RCC.FDCANFreq_Value=129000000 +RCC.FMCFreq_Value=64000000 +RCC.FamilyName=M +RCC.HCLK3ClockFreq_Value=64000000 +RCC.HCLKFreq_Value=64000000 +RCC.I2C123Freq_Value=32000000 +RCC.I2C4Freq_Value=64000000 +RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,D2PPRE1,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1Freq_Value,DIVQ2Freq_Value,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2Freq_Value,DIVR3Freq_Value,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,QSPIFreq_Value,RNGFreq_Value,RTCFreq_Value,SAI1Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16Freq_Value,USART234578Freq_Value,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value +RCC.LPTIM1Freq_Value=32000000 +RCC.LPTIM2Freq_Value=64000000 +RCC.LPTIM345Freq_Value=64000000 +RCC.LPUART1Freq_Value=64000000 +RCC.LTDCFreq_Value=129000000 +RCC.MCO1PinFreq_Value=64000000 +RCC.MCO2PinFreq_Value=64000000 +RCC.QSPIFreq_Value=64000000 +RCC.RNGFreq_Value=48000000 +RCC.RTCFreq_Value=32000 +RCC.SAI1Freq_Value=129000000 +RCC.SAI4AFreq_Value=129000000 +RCC.SAI4BFreq_Value=129000000 +RCC.SDMMCFreq_Value=129000000 +RCC.SPDIFRXFreq_Value=129000000 +RCC.SPI123Freq_Value=129000000 +RCC.SPI45Freq_Value=64000000 +RCC.SPI6Freq_Value=64000000 +RCC.SWPMI1Freq_Value=32000000 +RCC.SYSCLKFreq_VALUE=64000000 +RCC.Tim1OutputFreq_Value=64000000 +RCC.Tim2OutputFreq_Value=64000000 +RCC.TraceFreq_Value=64000000 +RCC.USART16Freq_Value=64000000 +RCC.USART234578Freq_Value=32000000 +RCC.USBFreq_Value=129000000 +RCC.VCO1OutputFreq_Value=258000000 +RCC.VCO2OutputFreq_Value=258000000 +RCC.VCO3OutputFreq_Value=258000000 +RCC.VCOInput1Freq_Value=2000000 +RCC.VCOInput2Freq_Value=2000000 +RCC.VCOInput3Freq_Value=2000000 +USART3.IPParameters=VirtualMode-Asynchronous +USART3.VirtualMode-Asynchronous=VM_ASYNC +VP_MEMORYMAP_VS_MEMORYMAP.Mode=CurAppReg +VP_MEMORYMAP_VS_MEMORYMAP.Signal=MEMORYMAP_VS_MEMORYMAP +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +board=custom diff --git a/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/Inc/main.h b/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/Inc/main.h new file mode 100644 index 00000000000..4345c9ffb69 --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/Inc/main.h @@ -0,0 +1,69 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32h7xx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ diff --git a/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/Inc/stm32h7xx_hal_conf.h b/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/Inc/stm32h7xx_hal_conf.h new file mode 100644 index 00000000000..7e69597ba0e --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/Inc/stm32h7xx_hal_conf.h @@ -0,0 +1,515 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + * Copyright (c) 2017 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32H7xx_HAL_CONF_H +#define STM32H7xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED + + /* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_FDCAN_MODULE_ENABLED */ +/* #define HAL_FMAC_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +/* #define HAL_CORDIC_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +/* #define HAL_ETH_LEGACY_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_OTFDEC_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_HRTIM_MODULE_ENABLED */ +/* #define HAL_HSEM_MODULE_ENABLED */ +/* #define HAL_GFXMMU_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_OPAMP_MODULE_ENABLED */ +/* #define HAL_OSPI_MODULE_ENABLED */ +/* #define HAL_XSPI_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_XSPI_MODULE_ENABLED */ +/* #define HAL_RAMECC_MODULE_ENABLED */ +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_SWPMI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +/* #define HAL_PCD_MODULE_ENABLED */ +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_JPEG_MODULE_ENABLED */ +/* #define HAL_MDIOS_MODULE_ENABLED */ +/* #define HAL_PSSI_MODULE_ENABLED */ +/* #define HAL_DTS_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_MDMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_I2C_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED +#define HAL_HSEM_MODULE_ENABLED + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE (25000000UL) /*!< Value of the External oscillator in Hz : FPGA case fixed to 60MHZ */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal oscillator (CSI) default value. + * This value is the default CSI value after Reset. + */ +#if !defined (CSI_VALUE) + #define CSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* CSI_VALUE */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE (64000000UL) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +#if !defined (LSI_VALUE) + #define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE 12288000UL /*!< Value of the External clock in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY (15UL) /*!< tick interrupt priority */ +#define USE_RTOS 0 +#define USE_SD_TRANSCEIVER 0U /*!< use uSD Transceiver */ +#define USE_SPI_CRC 0U /*!< use CRC in SPI */ + +#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ +#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */ +#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */ +#define USE_HAL_CORDIC_REGISTER_CALLBACKS 0U /* CORDIC register callback disabled */ +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */ +#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */ +#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */ +#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */ +#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */ +#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */ +#define USE_HAL_DTS_REGISTER_CALLBACKS 0U /* DTS register callback disabled */ +#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */ +#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */ +#define USE_HAL_FMAC_REGISTER_CALLBACKS 0U /* FMAC register callback disabled */ +#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */ +#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */ +#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */ +#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */ +#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */ +#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */ +#define USE_HAL_GFXMMU_REGISTER_CALLBACKS 0U /* GFXMMU register callback disabled */ +#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */ +#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ +#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ +#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */ +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */ +#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */ +#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */ +#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */ +#define USE_HAL_OSPI_REGISTER_CALLBACKS 0U /* OSPI register callback disabled */ +#define USE_HAL_OTFDEC_REGISTER_CALLBACKS 0U /* OTFDEC register callback disabled */ +#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */ +#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */ +#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */ +#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ +#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */ +#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */ +#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ +#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */ +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ +#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ +#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */ +#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ +#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ +#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ + +/* ########################### Ethernet Configuration ######################### */ +#define ETH_TX_DESC_CNT 4U /* number of Ethernet Tx DMA descriptors */ +#define ETH_RX_DESC_CNT 4U /* number of Ethernet Rx DMA descriptors */ + +#define ETH_MAC_ADDR0 (0x02UL) +#define ETH_MAC_ADDR1 (0x00UL) +#define ETH_MAC_ADDR2 (0x00UL) +#define ETH_MAC_ADDR3 (0x00UL) +#define ETH_MAC_ADDR4 (0x00UL) +#define ETH_MAC_ADDR5 (0x00UL) + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32h7xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32h7xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32h7xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_MDMA_MODULE_ENABLED + #include "stm32h7xx_hal_mdma.h" +#endif /* HAL_MDMA_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32h7xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32h7xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32h7xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32h7xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32h7xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_DTS_MODULE_ENABLED + #include "stm32h7xx_hal_dts.h" +#endif /* HAL_DTS_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32h7xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_ETH_LEGACY_MODULE_ENABLED + #include "stm32h7xx_hal_eth_legacy.h" +#endif /* HAL_ETH_LEGACY_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32h7xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32h7xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32h7xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_FDCAN_MODULE_ENABLED + #include "stm32h7xx_hal_fdcan.h" +#endif /* HAL_FDCAN_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32h7xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED + #include "stm32h7xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CORDIC_MODULE_ENABLED + #include "stm32h7xx_hal_cordic.h" +#endif /* HAL_CORDIC_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32h7xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32h7xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32h7xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32h7xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_GFXMMU_MODULE_ENABLED + #include "stm32h7xx_hal_gfxmmu.h" +#endif /* HAL_GFXMMU_MODULE_ENABLED */ + +#ifdef HAL_FMAC_MODULE_ENABLED + #include "stm32h7xx_hal_fmac.h" +#endif /* HAL_FMAC_MODULE_ENABLED */ + +#ifdef HAL_HRTIM_MODULE_ENABLED + #include "stm32h7xx_hal_hrtim.h" +#endif /* HAL_HRTIM_MODULE_ENABLED */ + +#ifdef HAL_HSEM_MODULE_ENABLED + #include "stm32h7xx_hal_hsem.h" +#endif /* HAL_HSEM_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32h7xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32h7xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32h7xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32h7xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32h7xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_JPEG_MODULE_ENABLED + #include "stm32h7xx_hal_jpeg.h" +#endif /* HAL_JPEG_MODULE_ENABLED */ + +#ifdef HAL_MDIOS_MODULE_ENABLED + #include "stm32h7xx_hal_mdios.h" +#endif /* HAL_MDIOS_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32h7xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32h7xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED +#include "stm32h7xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_OPAMP_MODULE_ENABLED +#include "stm32h7xx_hal_opamp.h" +#endif /* HAL_OPAMP_MODULE_ENABLED */ + +#ifdef HAL_OSPI_MODULE_ENABLED + #include "stm32h7xx_hal_ospi.h" +#endif /* HAL_OSPI_MODULE_ENABLED */ + +#ifdef HAL_OTFDEC_MODULE_ENABLED +#include "stm32h7xx_hal_otfdec.h" +#endif /* HAL_OTFDEC_MODULE_ENABLED */ + +#ifdef HAL_PSSI_MODULE_ENABLED + #include "stm32h7xx_hal_pssi.h" +#endif /* HAL_PSSI_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32h7xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32h7xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_RAMECC_MODULE_ENABLED + #include "stm32h7xx_hal_ramecc.h" +#endif /* HAL_RAMECC_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32h7xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32h7xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32h7xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32h7xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32h7xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32h7xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32h7xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_SWPMI_MODULE_ENABLED + #include "stm32h7xx_hal_swpmi.h" +#endif /* HAL_SWPMI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32h7xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32h7xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32h7xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32h7xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32h7xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED + #include "stm32h7xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32h7xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32h7xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32h7xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t *file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32H7xx_HAL_CONF_H */ diff --git a/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/Inc/stm32h7xx_it.h b/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/Inc/stm32h7xx_it.h new file mode 100644 index 00000000000..303bf5802d7 --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/Inc/stm32h7xx_it.h @@ -0,0 +1,66 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32H7xx_IT_H +#define __STM32H7xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32H7xx_IT_H */ diff --git a/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c b/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c new file mode 100644 index 00000000000..e8d201fc59a --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c @@ -0,0 +1,159 @@ + +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_hal_msp.c + * @brief This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/** +* @brief UART MSP Initialization +* This function configures the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + if(huart->Instance==USART3) + { + /* USER CODE BEGIN USART3_MspInit 0 */ + + /* USER CODE END USART3_MspInit 0 */ + + /** Initializes the peripherals clock + */ + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART3; + PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_D2PCLK1; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + /*Error_Handler();*/ + } + + /* Peripheral clock enable */ + __HAL_RCC_USART3_CLK_ENABLE(); + + __HAL_RCC_GPIOD_CLK_ENABLE(); + /**USART3 GPIO Configuration + PD8 ------> USART3_TX + PD9 ------> USART3_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF7_USART3; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + + /* USER CODE BEGIN USART3_MspInit 1 */ + + /* USER CODE END USART3_MspInit 1 */ + + } + +} + +/** +* @brief UART MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + if(huart->Instance==USART3) + { + /* USER CODE BEGIN USART3_MspDeInit 0 */ + + /* USER CODE END USART3_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART3_CLK_DISABLE(); + + /**USART3 GPIO Configuration + PD8 ------> USART3_TX + PD9 ------> USART3_RX + */ + HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9); + + /* USER CODE BEGIN USART3_MspDeInit 1 */ + + /* USER CODE END USART3_MspDeInit 1 */ + } + +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/Src/stm32h7xx_it.c b/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/Src/stm32h7xx_it.c new file mode 100644 index 00000000000..cd5531f6af7 --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/board/CubeMX_Config/Src/stm32h7xx_it.c @@ -0,0 +1,203 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32h7xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + * Copyright (c) 2024 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32h7xx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ + +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + while (1) + { + } + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) +{ + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ + /* USER CODE END W1_MemoryManagement_IRQn 0 */ + } +} + +/** + * @brief This function handles Pre-fetch fault, memory access fault. + */ +void BusFault_Handler(void) +{ + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_BusFault_IRQn 0 */ + /* USER CODE END W1_BusFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) +{ + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ + /* USER CODE END W1_UsageFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVCall_IRQn 0 */ + + /* USER CODE END SVCall_IRQn 0 */ + /* USER CODE BEGIN SVCall_IRQn 1 */ + + /* USER CODE END SVCall_IRQn 1 */ +} + +/** + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) +{ + /* USER CODE BEGIN DebugMonitor_IRQn 0 */ + + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + + /* USER CODE END DebugMonitor_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32H7xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32h7xx.s). */ +/******************************************************************************/ + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ diff --git a/bsp/stm32/stm32h723-st-nucleo/board/Kconfig b/bsp/stm32/stm32h723-st-nucleo/board/Kconfig new file mode 100644 index 00000000000..1155ab03f1f --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/board/Kconfig @@ -0,0 +1,33 @@ +menu "Hardware Drivers Config" + +menu "Onboard Peripheral Drivers" + +endmenu + +menu "On-chip Peripheral Drivers" + + config BSP_USING_GPIO + bool "Enable GPIO" + select RT_USING_PIN + default y + + menuconfig BSP_USING_UART + bool "Enable UART" + default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_USING_UART3 + bool "Enable UART3" + default y + + endif + + source "$(BSP_DIR)/../libraries/HAL_Drivers/drivers/Kconfig" + +endmenu + +menu "Board extended module Drivers" + +endmenu + +endmenu diff --git a/bsp/stm32/stm32h723-st-nucleo/board/SConscript b/bsp/stm32/stm32h723-st-nucleo/board/SConscript new file mode 100644 index 00000000000..2ed225df9de --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/board/SConscript @@ -0,0 +1,29 @@ +import rtconfig +from building import * + +Import('SDK_LIB') + +cwd = GetCurrentDir() + +# add the general drivers. +src = Glob('board.c') +src += Glob('CubeMX_Config/Src/stm32h7xx_hal_msp.c') + +path = [cwd] +path += [cwd + '/CubeMX_Config/Inc'] + +startup_path_prefix = SDK_LIB + +if rtconfig.PLATFORM in ['gcc']: + src += [startup_path_prefix + '/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/gcc/startup_stm32h743xx.s'] +elif rtconfig.PLATFORM in ['armcc', 'armclang']: + src += [startup_path_prefix + '/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/arm/startup_stm32h743xx.s'] +elif rtconfig.PLATFORM in ['iccarm']: + src += [startup_path_prefix + '/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/iar/startup_stm32h743xx.s'] + +# STM32H743xx || STM32H750xx || STM32F753xx +# You can select chips from the list above +CPPDEFINES = ['STM32H743xx'] +group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES) + +Return('group') diff --git a/bsp/stm32/stm32h723-st-nucleo/board/board.c b/bsp/stm32/stm32h723-st-nucleo/board/board.c new file mode 100644 index 00000000000..d2b24d40ffe --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/board/board.c @@ -0,0 +1,62 @@ +/* + * Copyright (c) 2006-2024 RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-06 SummerGift first version + */ + +#include "board.h" + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + + /** Supply configuration update enable + */ + HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY); + + /** Configure the main internal regulator output voltage + */ + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE3); + + while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) + {} + + /** Initializes the RCC Oscillators according to the specified parameters + * in the RCC_OscInitTypeDef structure. + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; + RCC_OscInitStruct.HSIState = RCC_HSI_DIV1; + RCC_OscInitStruct.HSICalibrationValue = 64; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + + /** Initializes the CPU, AHB and APB buses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2 + |RCC_CLOCKTYPE_D3PCLK1|RCC_CLOCKTYPE_D1PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI; + RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV1; + RCC_ClkInitStruct.APB3CLKDivider = RCC_APB3_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_APB1_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_APB2_DIV1; + RCC_ClkInitStruct.APB4CLKDivider = RCC_APB4_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) + { + Error_Handler(); + } +} diff --git a/bsp/stm32/stm32h723-st-nucleo/board/board.h b/bsp/stm32/stm32h723-st-nucleo/board/board.h new file mode 100644 index 00000000000..6b737553a92 --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/board/board.h @@ -0,0 +1,49 @@ +/* + * Copyright (c) 2006-2024 RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-5 SummerGift first version + */ + +#ifndef __BOARD_H__ +#define __BOARD_H__ + +#include +#include +#include "drv_common.h" +#include "drv_gpio.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define STM32_FLASH_START_ADRESS ((uint32_t)0x08000000) +#define STM32_FLASH_SIZE (1024 * 1024) +#define STM32_FLASH_END_ADDRESS ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE)) + +#define STM32_SRAM_SIZE (64*5) +#define STM32_SRAM_END (0x24000000 + STM32_SRAM_SIZE * 1024) + +#if defined(__ARMCC_VERSION) +extern int Image$$RW_IRAM2$$ZI$$Limit; +#define HEAP_BEGIN (&Image$$RW_IRAM2$$ZI$$Limit) +#elif __ICCARM__ +#pragma section="CSTACK" +#define HEAP_BEGIN (__segment_end("CSTACK")) +#else +extern int __bss_end; +#define HEAP_BEGIN (&__bss_end) +#endif + +#define HEAP_END STM32_SRAM_END + +void SystemClock_Config(void); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/bsp/stm32/stm32h723-st-nucleo/board/linker_scripts/link.icf b/bsp/stm32/stm32h723-st-nucleo/board/linker_scripts/link.icf new file mode 100644 index 00000000000..14ec1960192 --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/board/linker_scripts/link.icf @@ -0,0 +1,28 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x081FFFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x24000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2407FFFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x800; +define symbol __ICFEDIT_size_heap__ = 0x000; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, last block CSTACK}; diff --git a/bsp/stm32/stm32h723-st-nucleo/board/linker_scripts/link.lds b/bsp/stm32/stm32h723-st-nucleo/board/linker_scripts/link.lds new file mode 100644 index 00000000000..746f37e20af --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/board/linker_scripts/link.lds @@ -0,0 +1,157 @@ +/* + * linker script for STM32F4xx with GNU ld + * bernard.xiong 2009-10-14 + */ + +/* Program Entry, set to mark it as "used" and avoid gc */ +MEMORY +{ + ROM (rx) : ORIGIN = 0x08000000, LENGTH = 1024k /* 1024KB flash */ + RAM (rw) : ORIGIN = 0x24000000, LENGTH = 564k /* 564K sram */ +} +ENTRY(Reset_Handler) +_system_stack_size = 0x400; + +SECTIONS +{ + .text : + { + . = ALIGN(4); + _stext = .; + KEEP(*(.isr_vector)) /* Startup code */ + + . = ALIGN(4); + *(.text) /* remaining code */ + *(.text.*) /* remaining code */ + *(.rodata) /* read-only data (constants) */ + *(.rodata*) + *(.glue_7) + *(.glue_7t) + *(.gnu.linkonce.t*) + + /* section information for finsh shell */ + . = ALIGN(4); + __fsymtab_start = .; + KEEP(*(FSymTab)) + __fsymtab_end = .; + + . = ALIGN(4); + __vsymtab_start = .; + KEEP(*(VSymTab)) + __vsymtab_end = .; + + /* section information for initial. */ + . = ALIGN(4); + __rt_init_start = .; + KEEP(*(SORT(.rti_fn*))) + __rt_init_end = .; + + . = ALIGN(4); + + PROVIDE(__ctors_start__ = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + PROVIDE(__ctors_end__ = .); + + . = ALIGN(4); + + _etext = .; + } > ROM = 0 + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + + /* This is used by the startup in order to initialize the .data secion */ + _sidata = .; + } > ROM + __exidx_end = .; + + /* .data section which is used for initialized data */ + + .data : AT (_sidata) + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _sdata = . ; + + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + + PROVIDE(__dtors_start__ = .); + KEEP(*(SORT(.dtors.*))) + KEEP(*(.dtors)) + PROVIDE(__dtors_end__ = .); + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _edata = . ; + } >RAM + + .stack : + { + . = ALIGN(4); + _sstack = .; + . = . + _system_stack_size; + . = ALIGN(4); + _estack = .; + } >RAM + + __bss_start = .; + .bss : + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; + + *(.bss) + *(.bss.*) + *(COMMON) + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _ebss = . ; + + *(.bss.init) + } > RAM + __bss_end = .; + + _end = .; + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + * Symbols in the DWARF debugging sections are relative to the beginning + * of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +} diff --git a/bsp/stm32/stm32h723-st-nucleo/board/linker_scripts/link.sct b/bsp/stm32/stm32h723-st-nucleo/board/linker_scripts/link.sct new file mode 100644 index 00000000000..a6e04bf6abc --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/board/linker_scripts/link.sct @@ -0,0 +1,19 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x08000000 0x00100000 { ; load region size_region + ER_IROM1 0x08000000 0x00100000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + .ANY (+XO) + } + RW_IRAM1 0x20000000 0x00020000 { ; RW data + .ANY (+RW +ZI) + } + RW_IRAM2 0x24000000 0x00050000 { + .ANY (+RW +ZI) + } +} + diff --git a/bsp/stm32/stm32h723-st-nucleo/figures/board.png b/bsp/stm32/stm32h723-st-nucleo/figures/board.png new file mode 100644 index 00000000000..203004b6148 Binary files /dev/null and b/bsp/stm32/stm32h723-st-nucleo/figures/board.png differ diff --git a/bsp/stm32/stm32h723-st-nucleo/project.uvoptx b/bsp/stm32/stm32h723-st-nucleo/project.uvoptx new file mode 100644 index 00000000000..3fc23b624c9 --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/project.uvoptx @@ -0,0 +1,1224 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc; *.md + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rt-thread + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 1 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 6 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + ARMRTXEVENTFLAGS + -L70 -Z18 -C0 -M0 -T1 + + + 0 + DLGTARM + (1010=-1,-1,-1,-1,0)(6017=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(6016=-1,-1,-1,-1,0)(1012=-1,-1,-1,-1,0) + + + 0 + ARMDBGFLAGS + + + + 0 + DLGUARM + (105=-1,-1,-1,-1,0) + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC8000 -FD20000000 -FF0STM32H72x-73x_1024 -FL0100000 -FS08000000 -FP0($$Device:STM32H723ZGTx$CMSIS\Flash\STM32H72x-73x_1024.FLM) + + + 0 + ST-LINKIII-KEIL_SWO + -U002D00463432511330343838 -O206 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP (ARM Core") -D00(6BA02477) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC8000 -FN1 -FF0STM32H72x-73x_1024.FLM -FS08000000 -FL0100000 -FP0($$Device:STM32H723ZGTx$CMSIS\Flash\STM32H72x-73x_1024.FLM) + + + + + 0 + + + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + 1 + 0 + 0 + 2 + 10000000 + + + + + + Applications + 1 + 0 + 0 + 0 + + 1 + 1 + 1 + 0 + 0 + 0 + applications\main.c + main.c + 0 + 0 + + + + + Compiler + 0 + 0 + 0 + 0 + + 2 + 2 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\armlibc\syscall_mem.c + syscall_mem.c + 0 + 0 + + + 2 + 3 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\armlibc\syscalls.c + syscalls.c + 0 + 0 + + + 2 + 4 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\cctype.c + cctype.c + 0 + 0 + + + 2 + 5 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\cstdlib.c + cstdlib.c + 0 + 0 + + + 2 + 6 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\cstring.c + cstring.c + 0 + 0 + + + 2 + 7 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\ctime.c + ctime.c + 0 + 0 + + + 2 + 8 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\cunistd.c + cunistd.c + 0 + 0 + + + 2 + 9 + 1 + 0 + 0 + 0 + ..\..\..\components\libc\compilers\common\cwchar.c + cwchar.c + 0 + 0 + + + + + DeviceDrivers + 1 + 0 + 0 + 0 + + 3 + 10 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\core\device.c + device.c + 0 + 0 + + + 3 + 11 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\completion_comm.c + completion_comm.c + 0 + 0 + + + 3 + 12 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\completion_up.c + completion_up.c + 0 + 0 + + + 3 + 13 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\condvar.c + condvar.c + 0 + 0 + + + 3 + 14 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\dataqueue.c + dataqueue.c + 0 + 0 + + + 3 + 15 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\pipe.c + pipe.c + 0 + 0 + + + 3 + 16 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\ringblk_buf.c + ringblk_buf.c + 0 + 0 + + + 3 + 17 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\ringbuffer.c + ringbuffer.c + 0 + 0 + + + 3 + 18 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\waitqueue.c + waitqueue.c + 0 + 0 + + + 3 + 19 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\ipc\workqueue.c + workqueue.c + 0 + 0 + + + 3 + 20 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\pin\dev_pin.c + dev_pin.c + 0 + 0 + + + 3 + 21 + 1 + 0 + 0 + 0 + ..\..\..\components\drivers\serial\dev_serial.c + dev_serial.c + 0 + 0 + + + + + Drivers + 0 + 0 + 0 + 0 + + 4 + 22 + 2 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\CMSIS\Device\ST\STM32H7xx\Source\Templates\arm\startup_stm32h743xx.s + startup_stm32h743xx.s + 0 + 0 + + + 4 + 23 + 1 + 0 + 0 + 0 + board\CubeMX_Config\Src\stm32h7xx_hal_msp.c + stm32h7xx_hal_msp.c + 0 + 0 + + + 4 + 24 + 1 + 0 + 0 + 0 + board\board.c + board.c + 0 + 0 + + + 4 + 25 + 1 + 0 + 0 + 0 + ..\libraries\HAL_Drivers\drivers\drv_gpio.c + drv_gpio.c + 0 + 0 + + + 4 + 26 + 1 + 0 + 0 + 0 + ..\libraries\HAL_Drivers\drivers\drv_usart.c + drv_usart.c + 0 + 0 + + + 4 + 27 + 1 + 0 + 0 + 0 + ..\libraries\HAL_Drivers\drv_common.c + drv_common.c + 0 + 0 + + + + + Finsh + 0 + 0 + 0 + 0 + + 5 + 28 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\cmd.c + cmd.c + 0 + 0 + + + 5 + 29 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\shell.c + shell.c + 0 + 0 + + + 5 + 30 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\msh_parse.c + msh_parse.c + 0 + 0 + + + 5 + 31 + 1 + 0 + 0 + 0 + ..\..\..\components\finsh\msh.c + msh.c + 0 + 0 + + + + + Kernel + 0 + 0 + 0 + 0 + + 6 + 32 + 1 + 0 + 0 + 0 + ..\..\..\src\clock.c + clock.c + 0 + 0 + + + 6 + 33 + 1 + 0 + 0 + 0 + ..\..\..\src\components.c + components.c + 0 + 0 + + + 6 + 34 + 1 + 0 + 0 + 0 + ..\..\..\src\cpu_up.c + cpu_up.c + 0 + 0 + + + 6 + 35 + 1 + 0 + 0 + 0 + ..\..\..\src\defunct.c + defunct.c + 0 + 0 + + + 6 + 36 + 1 + 0 + 0 + 0 + ..\..\..\src\idle.c + idle.c + 0 + 0 + + + 6 + 37 + 1 + 0 + 0 + 0 + ..\..\..\src\ipc.c + ipc.c + 0 + 0 + + + 6 + 38 + 1 + 0 + 0 + 0 + ..\..\..\src\irq.c + irq.c + 0 + 0 + + + 6 + 39 + 1 + 0 + 0 + 0 + ..\..\..\src\kservice.c + kservice.c + 0 + 0 + + + 6 + 40 + 1 + 0 + 0 + 0 + ..\..\..\src\mem.c + mem.c + 0 + 0 + + + 6 + 41 + 1 + 0 + 0 + 0 + ..\..\..\src\mempool.c + mempool.c + 0 + 0 + + + 6 + 42 + 1 + 0 + 0 + 0 + ..\..\..\src\object.c + object.c + 0 + 0 + + + 6 + 43 + 1 + 0 + 0 + 0 + ..\..\..\src\scheduler_comm.c + scheduler_comm.c + 0 + 0 + + + 6 + 44 + 1 + 0 + 0 + 0 + ..\..\..\src\scheduler_up.c + scheduler_up.c + 0 + 0 + + + 6 + 45 + 1 + 0 + 0 + 0 + ..\..\..\src\thread.c + thread.c + 0 + 0 + + + 6 + 46 + 1 + 0 + 0 + 0 + ..\..\..\src\timer.c + timer.c + 0 + 0 + + + + + klibc + 0 + 0 + 0 + 0 + + 7 + 47 + 1 + 0 + 0 + 0 + ..\..\..\src\klibc\rt_vsnprintf_tiny.c + rt_vsnprintf_tiny.c + 0 + 0 + + + 7 + 48 + 1 + 0 + 0 + 0 + ..\..\..\src\klibc\rt_vsscanf.c + rt_vsscanf.c + 0 + 0 + + + 7 + 49 + 1 + 0 + 0 + 0 + ..\..\..\src\klibc\kerrno.c + kerrno.c + 0 + 0 + + + 7 + 50 + 1 + 0 + 0 + 0 + ..\..\..\src\klibc\kstdio.c + kstdio.c + 0 + 0 + + + 7 + 51 + 1 + 0 + 0 + 0 + ..\..\..\src\klibc\kstring.c + kstring.c + 0 + 0 + + + + + libcpu + 0 + 0 + 0 + 0 + + 8 + 52 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\common\atomic_arm.c + atomic_arm.c + 0 + 0 + + + 8 + 53 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\common\div0.c + div0.c + 0 + 0 + + + 8 + 54 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\common\showmem.c + showmem.c + 0 + 0 + + + 8 + 55 + 2 + 0 + 0 + 0 + ..\..\..\libcpu\arm\cortex-m7\context_rvds.S + context_rvds.S + 0 + 0 + + + 8 + 56 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\cortex-m7\cpu_cache.c + cpu_cache.c + 0 + 0 + + + 8 + 57 + 1 + 0 + 0 + 0 + ..\..\..\libcpu\arm\cortex-m7\cpuport.c + cpuport.c + 0 + 0 + + + + + Libraries + 0 + 0 + 0 + 0 + + 9 + 58 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c + stm32h7xx_hal_cortex.c + 0 + 0 + + + 9 + 59 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c + stm32h7xx_hal_dma_ex.c + 0 + 0 + + + 9 + 60 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cryp.c + stm32h7xx_hal_cryp.c + 0 + 0 + + + 9 + 61 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c + stm32h7xx_hal_uart_ex.c + 0 + 0 + + + 9 + 62 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_crc_ex.c + stm32h7xx_hal_crc_ex.c + 0 + 0 + + + 9 + 63 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c + stm32h7xx_hal_mdma.c + 0 + 0 + + + 9 + 64 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rng.c + stm32h7xx_hal_rng.c + 0 + 0 + + + 9 + 65 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx.c + system_stm32h7xx.c + 0 + 0 + + + 9 + 66 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c + stm32h7xx_hal_gpio.c + 0 + 0 + + + 9 + 67 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sram.c + stm32h7xx_hal_sram.c + 0 + 0 + + + 9 + 68 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c + stm32h7xx_hal_pwr_ex.c + 0 + 0 + + + 9 + 69 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c + stm32h7xx_hal_rcc.c + 0 + 0 + + + 9 + 70 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c + stm32h7xx_hal.c + 0 + 0 + + + 9 + 71 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c + stm32h7xx_hal_rcc_ex.c + 0 + 0 + + + 9 + 72 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cec.c + stm32h7xx_hal_cec.c + 0 + 0 + + + 9 + 73 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c + stm32h7xx_hal_uart.c + 0 + 0 + + + 9 + 74 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c + stm32h7xx_hal_dma.c + 0 + 0 + + + 9 + 75 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cryp_ex.c + stm32h7xx_hal_cryp_ex.c + 0 + 0 + + + 9 + 76 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_comp.c + stm32h7xx_hal_comp.c + 0 + 0 + + + 9 + 77 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c + stm32h7xx_hal_pwr.c + 0 + 0 + + + 9 + 78 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_usart.c + stm32h7xx_hal_usart.c + 0 + 0 + + + 9 + 79 + 1 + 0 + 0 + 0 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_crc.c + stm32h7xx_hal_crc.c + 0 + 0 + + + + diff --git a/bsp/stm32/stm32h723-st-nucleo/project.uvprojx b/bsp/stm32/stm32h723-st-nucleo/project.uvprojx new file mode 100644 index 00000000000..e1fa3a6f0f8 --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/project.uvprojx @@ -0,0 +1,2225 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::.\ARMCC + 0 + + + STM32H723ZGTx + STMicroelectronics + Keil.STM32H7xx_DFP.3.1.1 + https://www.keil.com/pack/ + IRAM(0x20000000,0x00020000) IRAM2(0x24000000,0x00050000) IROM(0x08000000,0x00100000) XRAM(0x30000000,0x00008000) XRAM2(0x38000000,0x00004000) CPUTYPE("Cortex-M7") FPU3(DFPU) CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC8000 -FN1 -FF0STM32H72x-73x_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32H723ZGTx$CMSIS\Flash\STM32H72x-73x_1024.FLM)) + 0 + $$Device:STM32H723ZGTx$Drivers\CMSIS\Device\ST\STM32H7xx\Include\stm32h7xx.h + + + + + + + + + + $$Device:STM32H723ZGTx$CMSIS\SVD\STM32H723.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\ + rt-thread + 1 + 0 + 0 + 1 + 0 + .\build\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM7 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM7 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M7" + + 0 + 0 + 0 + 1 + 1 + 1 + 0 + 3 + 0 + 0 + 1 + 0 + 8 + 1 + 0 + 0 + 0 + 3 + 4 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 1 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x20000 + + + 1 + 0x8000000 + 0x100000 + + + 1 + 0x30000000 + 0x8000 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x100000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x30000000 + 0x8000 + + + 0 + 0x38000000 + 0x4000 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x20000 + + + 0 + 0x24000000 + 0x50000 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + + + __RTTHREAD__, __CLK_TCK=RT_TICK_PER_SECOND, USE_HAL_DRIVER, RT_USING_ARMLIBC, RT_USING_LIBC, __STDC_LIMIT_MACROS, STM32H743xx + + ..\..\..\components\drivers\include;..\..\..\components\libc\posix\io\poll;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\..\..\libcpu\arm\common;..\libraries\HAL_Drivers\CMSIS\Include;..\..\..\components\drivers\smp_call;..\..\..\components\libc\posix\io\eventfd;..\..\..\components\libc\compilers\common\extension;..\..\..\components\drivers\phy;..\..\..\components\finsh;applications;..\..\..\components\drivers\include;..\libraries\HAL_Drivers\drivers\config;..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Inc;..\..\..\components\libc\posix\ipc;board;..\..\..\libcpu\arm\cortex-m7;..\..\..\components\libc\posix\io\epoll;.;..\libraries\STM32H7xx_HAL\CMSIS\Device\ST\STM32H7xx\Include;..\..\..\components\libc\compilers\common\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\include;..\libraries\HAL_Drivers;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers\drivers + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 4 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + Applications + + + main.c + 1 + applications\main.c + + + + + Compiler + + + syscall_mem.c + 1 + ..\..\..\components\libc\compilers\armlibc\syscall_mem.c + + + syscalls.c + 1 + ..\..\..\components\libc\compilers\armlibc\syscalls.c + + + cctype.c + 1 + ..\..\..\components\libc\compilers\common\cctype.c + + + cstdlib.c + 1 + ..\..\..\components\libc\compilers\common\cstdlib.c + + + cstring.c + 1 + ..\..\..\components\libc\compilers\common\cstring.c + + + ctime.c + 1 + ..\..\..\components\libc\compilers\common\ctime.c + + + cunistd.c + 1 + ..\..\..\components\libc\compilers\common\cunistd.c + + + cwchar.c + 1 + ..\..\..\components\libc\compilers\common\cwchar.c + + + + + DeviceDrivers + + + device.c + 1 + ..\..\..\components\drivers\core\device.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_IPC_SOURCE__ + + + + + + + + + completion_comm.c + 1 + ..\..\..\components\drivers\ipc\completion_comm.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_IPC_SOURCE__ + + + + + + + + + completion_up.c + 1 + ..\..\..\components\drivers\ipc\completion_up.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_IPC_SOURCE__ + + + + + + + + + condvar.c + 1 + ..\..\..\components\drivers\ipc\condvar.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_IPC_SOURCE__ + + + + + + + + + dataqueue.c + 1 + ..\..\..\components\drivers\ipc\dataqueue.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_IPC_SOURCE__ + + + + + + + + + pipe.c + 1 + ..\..\..\components\drivers\ipc\pipe.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_IPC_SOURCE__ + + + + + + + + + ringblk_buf.c + 1 + ..\..\..\components\drivers\ipc\ringblk_buf.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_IPC_SOURCE__ + + + + + + + + + ringbuffer.c + 1 + ..\..\..\components\drivers\ipc\ringbuffer.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_IPC_SOURCE__ + + + + + + + + + waitqueue.c + 1 + ..\..\..\components\drivers\ipc\waitqueue.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_IPC_SOURCE__ + + + + + + + + + workqueue.c + 1 + ..\..\..\components\drivers\ipc\workqueue.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_IPC_SOURCE__ + + + + + + + + + dev_pin.c + 1 + ..\..\..\components\drivers\pin\dev_pin.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_IPC_SOURCE__ + + + + + + + + + dev_serial.c + 1 + ..\..\..\components\drivers\serial\dev_serial.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_IPC_SOURCE__ + + + + + + + + + + + Drivers + + + startup_stm32h743xx.s + 2 + ..\libraries\STM32H7xx_HAL\CMSIS\Device\ST\STM32H7xx\Source\Templates\arm\startup_stm32h743xx.s + + + stm32h7xx_hal_msp.c + 1 + board\CubeMX_Config\Src\stm32h7xx_hal_msp.c + + + board.c + 1 + board\board.c + + + drv_gpio.c + 1 + ..\libraries\HAL_Drivers\drivers\drv_gpio.c + + + drv_usart.c + 1 + ..\libraries\HAL_Drivers\drivers\drv_usart.c + + + drv_common.c + 1 + ..\libraries\HAL_Drivers\drv_common.c + + + + + Finsh + + + cmd.c + 1 + ..\..\..\components\finsh\cmd.c + + + shell.c + 1 + ..\..\..\components\finsh\shell.c + + + msh_parse.c + 1 + ..\..\..\components\finsh\msh_parse.c + + + msh.c + 1 + ..\..\..\components\finsh\msh.c + + + + + Kernel + + + clock.c + 1 + ..\..\..\src\clock.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_KERNEL_SOURCE__ + + + + + + + + + components.c + 1 + ..\..\..\src\components.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_KERNEL_SOURCE__ + + + + + + + + + cpu_up.c + 1 + ..\..\..\src\cpu_up.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_KERNEL_SOURCE__ + + + + + + + + + defunct.c + 1 + ..\..\..\src\defunct.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_KERNEL_SOURCE__ + + + + + + + + + idle.c + 1 + ..\..\..\src\idle.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_KERNEL_SOURCE__ + + + + + + + + + ipc.c + 1 + ..\..\..\src\ipc.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_KERNEL_SOURCE__ + + + + + + + + + irq.c + 1 + ..\..\..\src\irq.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_KERNEL_SOURCE__ + + + + + + + + + kservice.c + 1 + ..\..\..\src\kservice.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_KERNEL_SOURCE__ + + + + + + + + + mem.c + 1 + ..\..\..\src\mem.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_KERNEL_SOURCE__ + + + + + + + + + mempool.c + 1 + ..\..\..\src\mempool.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_KERNEL_SOURCE__ + + + + + + + + + object.c + 1 + ..\..\..\src\object.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_KERNEL_SOURCE__ + + + + + + + + + scheduler_comm.c + 1 + ..\..\..\src\scheduler_comm.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_KERNEL_SOURCE__ + + + + + + + + + scheduler_up.c + 1 + ..\..\..\src\scheduler_up.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_KERNEL_SOURCE__ + + + + + + + + + thread.c + 1 + ..\..\..\src\thread.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_KERNEL_SOURCE__ + + + + + + + + + timer.c + 1 + ..\..\..\src\timer.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + __RT_KERNEL_SOURCE__ + + + + + + + + + + + klibc + + + rt_vsnprintf_tiny.c + 1 + ..\..\..\src\klibc\rt_vsnprintf_tiny.c + + + rt_vsscanf.c + 1 + ..\..\..\src\klibc\rt_vsscanf.c + + + kerrno.c + 1 + ..\..\..\src\klibc\kerrno.c + + + kstdio.c + 1 + ..\..\..\src\klibc\kstdio.c + + + kstring.c + 1 + ..\..\..\src\klibc\kstring.c + + + + + libcpu + + + atomic_arm.c + 1 + ..\..\..\libcpu\arm\common\atomic_arm.c + + + div0.c + 1 + ..\..\..\libcpu\arm\common\div0.c + + + showmem.c + 1 + ..\..\..\libcpu\arm\common\showmem.c + + + context_rvds.S + 2 + ..\..\..\libcpu\arm\cortex-m7\context_rvds.S + + + cpu_cache.c + 1 + ..\..\..\libcpu\arm\cortex-m7\cpu_cache.c + + + cpuport.c + 1 + ..\..\..\libcpu\arm\cortex-m7\cpuport.c + + + + + Libraries + + + stm32h7xx_hal_cortex.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cortex.c + + + stm32h7xx_hal_dma_ex.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma_ex.c + + + stm32h7xx_hal_cryp.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cryp.c + + + stm32h7xx_hal_uart_ex.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart_ex.c + + + stm32h7xx_hal_crc_ex.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_crc_ex.c + + + stm32h7xx_hal_mdma.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_mdma.c + + + stm32h7xx_hal_rng.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rng.c + + + system_stm32h7xx.c + 1 + ..\libraries\STM32H7xx_HAL\CMSIS\Device\ST\STM32H7xx\Source\Templates\system_stm32h7xx.c + + + stm32h7xx_hal_gpio.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_gpio.c + + + stm32h7xx_hal_sram.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_sram.c + + + stm32h7xx_hal_pwr_ex.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr_ex.c + + + stm32h7xx_hal_rcc.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc.c + + + stm32h7xx_hal.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal.c + + + stm32h7xx_hal_rcc_ex.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_rcc_ex.c + + + stm32h7xx_hal_cec.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cec.c + + + stm32h7xx_hal_uart.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_uart.c + + + stm32h7xx_hal_dma.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_dma.c + + + stm32h7xx_hal_cryp_ex.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_cryp_ex.c + + + stm32h7xx_hal_comp.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_comp.c + + + stm32h7xx_hal_pwr.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_pwr.c + + + stm32h7xx_hal_usart.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_usart.c + + + stm32h7xx_hal_crc.c + 1 + ..\libraries\STM32H7xx_HAL\STM32H7xx_HAL_Driver\Src\stm32h7xx_hal_crc.c + + + + + + + + + + + + + + + + + <Project Info> + + + + + + 0 + 1 + + + + + diff --git a/bsp/stm32/stm32h723-st-nucleo/rtconfig.h b/bsp/stm32/stm32h723-st-nucleo/rtconfig.h new file mode 100644 index 00000000000..2bd7d8242cc --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/rtconfig.h @@ -0,0 +1,383 @@ +#ifndef RT_CONFIG_H__ +#define RT_CONFIG_H__ + +#define SOC_STM32H723ZG +#define BOARD_STM32H723_NUCLEO + +/* RT-Thread Kernel */ + +/* klibc options */ + +/* ------------rt_memset options------------ */ + + +/* ------------rt_memcpy options------------ */ + + +/* ------------rt_memmove options------------ */ + + +/* ------------rt_memcmp options------------ */ + + +/* ------------rt_strstr options------------ */ + + +/* ------------rt_strcasecmp options------------ */ + + +/* ------------rt_strncpy options------------ */ + + +/* ------------rt_strcpy options------------ */ + + +/* ------------rt_strncmp options------------ */ + + +/* ------------rt_strcmp options------------ */ + + +/* ------------rt_strlen options------------ */ + + +/* ------------rt_strlen options------------ */ + +/* ------------rt_strnlen options------------ */ + + +/* ------------rt_vsscanf options------------ */ + + +/* ------------rt_vsnprintf options------------ */ + +/* end of klibc options */ +#define RT_NAME_MAX 8 +#define RT_CPUS_NR 1 +#define RT_ALIGN_SIZE 8 +#define RT_THREAD_PRIORITY_32 +#define RT_THREAD_PRIORITY_MAX 32 +#define RT_TICK_PER_SECOND 1000 +#define RT_USING_OVERFLOW_CHECK +#define RT_USING_HOOK +#define RT_HOOK_USING_FUNC_PTR +#define RT_USING_IDLE_HOOK +#define RT_IDLE_HOOK_LIST_SIZE 4 +#define IDLE_THREAD_STACK_SIZE 256 + +/* kservice options */ + +/* end of kservice options */ +#define RT_USING_DEBUG +#define RT_DEBUGING_ASSERT +#define RT_DEBUGING_COLOR +#define RT_DEBUGING_CONTEXT + +/* Inter-Thread communication */ + +#define RT_USING_SEMAPHORE +#define RT_USING_MUTEX +#define RT_USING_EVENT +#define RT_USING_MAILBOX +#define RT_USING_MESSAGEQUEUE +/* end of Inter-Thread communication */ + +/* Memory Management */ + +#define RT_USING_MEMPOOL +#define RT_USING_SMALL_MEM +#define RT_USING_SMALL_MEM_AS_HEAP +#define RT_USING_HEAP +/* end of Memory Management */ +#define RT_USING_DEVICE +#define RT_USING_CONSOLE +#define RT_CONSOLEBUF_SIZE 128 +#define RT_CONSOLE_DEVICE_NAME "uart3" +#define RT_VER_NUM 0x50200 +#define RT_BACKTRACE_LEVEL_MAX_NR 32 +/* end of RT-Thread Kernel */ +#define RT_USING_CACHE +#define RT_USING_HW_ATOMIC +#define RT_USING_CPU_FFS +#define ARCH_ARM +#define ARCH_ARM_CORTEX_M +#define ARCH_ARM_CORTEX_M7 + +/* RT-Thread Components */ + +#define RT_USING_COMPONENTS_INIT +#define RT_USING_USER_MAIN +#define RT_MAIN_THREAD_STACK_SIZE 2048 +#define RT_MAIN_THREAD_PRIORITY 10 +#define RT_USING_MSH +#define RT_USING_FINSH +#define FINSH_USING_MSH +#define FINSH_THREAD_NAME "tshell" +#define FINSH_THREAD_PRIORITY 20 +#define FINSH_THREAD_STACK_SIZE 4096 +#define FINSH_USING_HISTORY +#define FINSH_HISTORY_LINES 5 +#define FINSH_USING_SYMTAB +#define FINSH_CMD_SIZE 80 +#define MSH_USING_BUILT_IN_COMMANDS +#define FINSH_USING_DESCRIPTION +#define FINSH_ARG_MAX 10 +#define FINSH_USING_OPTION_COMPLETION + +/* DFS: device virtual file system */ + +/* end of DFS: device virtual file system */ + +/* Device Drivers */ + +#define RT_USING_DEVICE_IPC +#define RT_UNAMED_PIPE_NUMBER 64 +#define RT_USING_SERIAL +#define RT_USING_SERIAL_V1 +#define RT_SERIAL_USING_DMA +#define RT_SERIAL_RB_BUFSZ 64 +#define RT_USING_PIN +/* end of Device Drivers */ + +/* C/C++ and POSIX layer */ + +/* ISO-ANSI C layer */ + +/* Timezone and Daylight Saving Time */ + +#define RT_LIBC_USING_LIGHT_TZ_DST +#define RT_LIBC_TZ_DEFAULT_HOUR 8 +#define RT_LIBC_TZ_DEFAULT_MIN 0 +#define RT_LIBC_TZ_DEFAULT_SEC 0 +/* end of Timezone and Daylight Saving Time */ +/* end of ISO-ANSI C layer */ + +/* POSIX (Portable Operating System Interface) layer */ + + +/* Interprocess Communication (IPC) */ + + +/* Socket is in the 'Network' category */ + +/* end of Interprocess Communication (IPC) */ +/* end of POSIX (Portable Operating System Interface) layer */ +/* end of C/C++ and POSIX layer */ + +/* Network */ + +/* end of Network */ + +/* Memory protection */ + +/* end of Memory protection */ + +/* Utilities */ + +/* end of Utilities */ + +/* Using USB legacy version */ + +/* end of Using USB legacy version */ +/* end of RT-Thread Components */ + +/* RT-Thread Utestcases */ + +/* end of RT-Thread Utestcases */ + +/* RT-Thread online packages */ + +/* IoT - internet of things */ + + +/* Wi-Fi */ + +/* Marvell WiFi */ + +/* end of Marvell WiFi */ + +/* Wiced WiFi */ + +/* end of Wiced WiFi */ + +/* CYW43012 WiFi */ + +/* end of CYW43012 WiFi */ + +/* BL808 WiFi */ + +/* end of BL808 WiFi */ + +/* CYW43439 WiFi */ + +/* end of CYW43439 WiFi */ +/* end of Wi-Fi */ + +/* IoT Cloud */ + +/* end of IoT Cloud */ +/* end of IoT - internet of things */ + +/* security packages */ + +/* end of security packages */ + +/* language packages */ + +/* JSON: JavaScript Object Notation, a lightweight data-interchange format */ + +/* end of JSON: JavaScript Object Notation, a lightweight data-interchange format */ + +/* XML: Extensible Markup Language */ + +/* end of XML: Extensible Markup Language */ +/* end of language packages */ + +/* multimedia packages */ + +/* LVGL: powerful and easy-to-use embedded GUI library */ + +/* end of LVGL: powerful and easy-to-use embedded GUI library */ + +/* u8g2: a monochrome graphic library */ + +/* end of u8g2: a monochrome graphic library */ +/* end of multimedia packages */ + +/* tools packages */ + +/* end of tools packages */ + +/* system packages */ + +/* enhanced kernel services */ + +/* end of enhanced kernel services */ + +/* acceleration: Assembly language or algorithmic acceleration packages */ + +/* end of acceleration: Assembly language or algorithmic acceleration packages */ + +/* CMSIS: ARM Cortex-M Microcontroller Software Interface Standard */ + +/* end of CMSIS: ARM Cortex-M Microcontroller Software Interface Standard */ + +/* Micrium: Micrium software products porting for RT-Thread */ + +/* end of Micrium: Micrium software products porting for RT-Thread */ +/* end of system packages */ + +/* peripheral libraries and drivers */ + +/* HAL & SDK Drivers */ + +/* STM32 HAL & SDK Drivers */ + +/* end of STM32 HAL & SDK Drivers */ + +/* Infineon HAL Packages */ + +/* end of Infineon HAL Packages */ + +/* Kendryte SDK */ + +/* end of Kendryte SDK */ +/* end of HAL & SDK Drivers */ + +/* sensors drivers */ + +/* end of sensors drivers */ + +/* touch drivers */ + +/* end of touch drivers */ +/* end of peripheral libraries and drivers */ + +/* AI packages */ + +/* end of AI packages */ + +/* Signal Processing and Control Algorithm Packages */ + +/* end of Signal Processing and Control Algorithm Packages */ + +/* miscellaneous packages */ + +/* project laboratory */ + +/* end of project laboratory */ + +/* samples: kernel and components samples */ + +/* end of samples: kernel and components samples */ + +/* entertainment: terminal games and other interesting software packages */ + +/* end of entertainment: terminal games and other interesting software packages */ +/* end of miscellaneous packages */ + +/* Arduino libraries */ + + +/* Projects and Demos */ + +/* end of Projects and Demos */ + +/* Sensors */ + +/* end of Sensors */ + +/* Display */ + +/* end of Display */ + +/* Timing */ + +/* end of Timing */ + +/* Data Processing */ + +/* end of Data Processing */ + +/* Data Storage */ + +/* Communication */ + +/* end of Communication */ + +/* Device Control */ + +/* end of Device Control */ + +/* Other */ + +/* end of Other */ + +/* Signal IO */ + +/* end of Signal IO */ + +/* Uncategorized */ + +/* end of Arduino libraries */ +/* end of RT-Thread online packages */ +#define SOC_FAMILY_STM32 +#define SOC_SERIES_STM32H7 +#define BOARD_SERIES_STM32_NUCLEO_144 + +/* Hardware Drivers Config */ + +/* Onboard Peripheral Drivers */ + +/* On-chip Peripheral Drivers */ + +#define BSP_USING_GPIO +#define BSP_USING_UART +#define BSP_USING_UART3 +/* end of On-chip Peripheral Drivers */ + +/* Board extended module Drivers */ + +/* end of Hardware Drivers Config */ + +#endif diff --git a/bsp/stm32/stm32h723-st-nucleo/rtconfig.py b/bsp/stm32/stm32h723-st-nucleo/rtconfig.py new file mode 100644 index 00000000000..15ddd3158a0 --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/rtconfig.py @@ -0,0 +1,185 @@ +import os + +# toolchains options +ARCH='arm' +CPU='cortex-m7' +CROSS_TOOL='gcc' + +# bsp lib config +BSP_LIBRARY_TYPE = None + +if os.getenv('RTT_CC'): + CROSS_TOOL = os.getenv('RTT_CC') +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') + +# cross_tool provides the cross compiler +# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR +if CROSS_TOOL == 'gcc': + PLATFORM = 'gcc' + EXEC_PATH = r'C:\Users\XXYYZZ' +elif CROSS_TOOL == 'keil': + PLATFORM = 'armcc' + EXEC_PATH = r'C:/Keil_v5' +elif CROSS_TOOL == 'iar': + PLATFORM = 'iccarm' + EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.3' + +if os.getenv('RTT_EXEC_PATH'): + EXEC_PATH = os.getenv('RTT_EXEC_PATH') + +BUILD = 'debug' + +if PLATFORM == 'gcc': + # toolchains + PREFIX = 'arm-none-eabi-' + CC = PREFIX + 'gcc' + AS = PREFIX + 'gcc' + AR = PREFIX + 'ar' + CXX = PREFIX + 'g++' + LINK = PREFIX + 'gcc' + TARGET_EXT = 'elf' + SIZE = PREFIX + 'size' + OBJDUMP = PREFIX + 'objdump' + OBJCPY = PREFIX + 'objcopy' + + DEVICE = ' -mcpu=cortex-m7 -mthumb -mfpu=fpv5-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections' + CFLAGS = DEVICE + ' -Dgcc' + AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb ' + LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds' + + CPATH = '' + LPATH = '' + + if BUILD == 'debug': + CFLAGS += ' -O0 -gdwarf-2 -g' + AFLAGS += ' -gdwarf-2' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + CFLAGS += ' -std=c99' + + POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n' + +elif PLATFORM == 'armcc': + # toolchains + CC = 'armcc' + CXX = 'armcc' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu Cortex-M7.fp.sp' + CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99' + AFLAGS = DEVICE + ' --apcs=interwork ' + LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rtthread.map --strict' + CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include' + LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib' + + CFLAGS += ' -D__MICROLIB ' + AFLAGS += ' --pd "__MICROLIB SETA 1" ' + LFLAGS += ' --library_type=microlib ' + EXEC_PATH += '/ARM/ARMCC/bin/' + + if BUILD == 'debug': + CFLAGS += ' -g -O0' + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + CFLAGS += ' -std=c99' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' + +elif PLATFORM == 'armclang': + # toolchains + CC = 'armclang' + CXX = 'armclang' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu Cortex-M7.fp.sp ' + CFLAGS = ' --target=arm-arm-none-eabi -mcpu=cortex-M7 ' + CFLAGS += ' -mcpu=cortex-M7 -mfpu=fpv4-sp-d16 ' + CFLAGS += ' -mfloat-abi=hard -c -fno-rtti -funsigned-char -fshort-enums -fshort-wchar ' + CFLAGS += ' -gdwarf-3 -ffunction-sections ' + AFLAGS = DEVICE + ' --apcs=interwork ' + LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers ' + LFLAGS += ' --list rt-thread.map ' + LFLAGS += r' --strict --scatter "board\linker_scripts\link.sct" ' + CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCLANG/include' + LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCLANG/lib' + + EXEC_PATH += '/ARM/ARMCLANG/bin/' + + if BUILD == 'debug': + CFLAGS += ' -g -O1' # armclang recommend + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + CFLAGS += ' -std=c99' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' + +elif PLATFORM == 'iccarm': + # toolchains + CC = 'iccarm' + CXX = 'iccarm' + AS = 'iasmarm' + AR = 'iarchive' + LINK = 'ilinkarm' + TARGET_EXT = 'out' + + DEVICE = '-Dewarm' + + CFLAGS = DEVICE + CFLAGS += ' --diag_suppress Pa050' + CFLAGS += ' --no_cse' + CFLAGS += ' --no_unroll' + CFLAGS += ' --no_inline' + CFLAGS += ' --no_code_motion' + CFLAGS += ' --no_tbaa' + CFLAGS += ' --no_clustering' + CFLAGS += ' --no_scheduling' + CFLAGS += ' --endian=little' + CFLAGS += ' --cpu=Cortex-M7' + CFLAGS += ' -e' + CFLAGS += ' --fpu=VFPv5_sp' + CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"' + CFLAGS += ' --silent' + + AFLAGS = DEVICE + AFLAGS += ' -s+' + AFLAGS += ' -w+' + AFLAGS += ' -r' + AFLAGS += ' --cpu Cortex-M7' + AFLAGS += ' --fpu VFPv5_sp' + AFLAGS += ' -S' + + if BUILD == 'debug': + CFLAGS += ' --debug' + CFLAGS += ' -On' + else: + CFLAGS += ' -Oh' + + LFLAGS = ' --config "board/linker_scripts/link.icf"' + LFLAGS += ' --entry __iar_program_start' + + CXXFLAGS = CFLAGS + + EXEC_PATH = EXEC_PATH + '/arm/bin/' + POST_ACTION = 'ielftool --bin $TARGET rtthread.bin' + +def dist_handle(BSP_ROOT, dist_dir): + import sys + cwd_path = os.getcwd() + sys.path.append(os.path.join(os.path.dirname(BSP_ROOT), 'tools')) + from sdk_dist import dist_do_building + dist_do_building(BSP_ROOT, dist_dir) diff --git a/bsp/stm32/stm32h723-st-nucleo/template.uvoptx b/bsp/stm32/stm32h723-st-nucleo/template.uvoptx new file mode 100644 index 00000000000..45c5acb84a2 --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/template.uvoptx @@ -0,0 +1,184 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc; *.md + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rt-thread + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 0 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 6 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC8000 -FD20000000 -FF0STM32H72x-73x_1024 -FL0100000 -FS08000000 -FP0($$Device:STM32H723ZGTx$CMSIS\Flash\STM32H72x-73x_1024.FLM) + + + 0 + ST-LINKIII-KEIL_SWO + -U002D00463432511330343838 -O206 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("") -D00(00000000) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC8000 -FN1 -FF0STM32H72x-73x_1024.FLM -FS08000000 -FL0100000 -FP0($$Device:STM32H723ZGTx$CMSIS\Flash\STM32H72x-73x_1024.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + 1 + 0 + 0 + 2 + 10000000 + + + + + diff --git a/bsp/stm32/stm32h723-st-nucleo/template.uvprojx b/bsp/stm32/stm32h723-st-nucleo/template.uvprojx new file mode 100644 index 00000000000..25db10cf23a --- /dev/null +++ b/bsp/stm32/stm32h723-st-nucleo/template.uvprojx @@ -0,0 +1,406 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::.\ARMCC + 0 + + + STM32H723ZGTx + STMicroelectronics + Keil.STM32H7xx_DFP.3.1.1 + https://www.keil.com/pack/ + IRAM(0x20000000,0x00020000) IRAM2(0x24000000,0x00050000) IROM(0x08000000,0x00100000) XRAM(0x30000000,0x00008000) XRAM2(0x38000000,0x00004000) CPUTYPE("Cortex-M7") FPU3(DFPU) CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC8000 -FN1 -FF0STM32H72x-73x_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32H723ZGTx$CMSIS\Flash\STM32H72x-73x_1024.FLM)) + 0 + $$Device:STM32H723ZGTx$Drivers\CMSIS\Device\ST\STM32H7xx\Include\stm32h7xx.h + + + + + + + + + + $$Device:STM32H723ZGTx$CMSIS\SVD\STM32H723.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\ + rt-thread + 1 + 0 + 0 + 1 + 0 + .\build\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM7 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM7 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M7" + + 0 + 0 + 0 + 1 + 1 + 1 + 0 + 3 + 0 + 0 + 1 + 0 + 8 + 1 + 0 + 0 + 0 + 3 + 4 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 1 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x20000 + + + 1 + 0x8000000 + 0x100000 + + + 1 + 0x30000000 + 0x8000 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x100000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x30000000 + 0x8000 + + + 0 + 0x38000000 + 0x4000 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x20000 + + + 0 + 0x24000000 + 0x50000 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 4 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + + + + + + + + + + + <Project Info> + + + + + + 0 + 1 + + + + +