Gripper Example

Gripper Control

Summary

Use gripper control as an example of controlling Baxter's grippers.

• Overview
• Running the Example:
  • Usage (Keyboard Control)
  • Joystick Control
• Troubleshooting

Overview

Uses the keyboard or joystick to control Baxters grippers. Position, velocity, holding, and moving force can be controlled and sensed. Both logitech and xbox game controllers are supported.

Usage

Start gripper control from an RSDK terminal session using:

$ rosrun baxter_examples gripper_keyboard.py

IMPORTANT: You will have to calibrate both grippers before using any of the other commands using C/c commands:

Once calibrated, future calibrate commands will not do anything unless you send a 'reset' first.

Key Bindings

Get a list of commands by entering '?'

Key	Left	Key	Right
?	Help	Esc	Quit
c	left: calibrate	C	right: calibrate
q	left: close	Q	right: close
w	left: open	W	right: open
u	left: decrease position	U	right: decrease position
i	left: increase position	I	right: increase position
v	left: decrease velocity	V	right: decrease velocity
b	left: increase velocity	B	right: increase velocity
h	left: decrease holding force	H	right: decrease holding force
j	left: increase holding force	J	right: increase holding force
f	left: decrease moving force	F	right: decrease moving force
g	left: increase moving force	G	right: increase moving force
z	left: decrease dead band	Z	right: decrease dead band
x	left: increase dead band	X	right: increase dead band
[	left: set 100% velocity	{	right: set 100% velocity
]	left: set 30% velocity	}	right: set 30% velocity
r	left: reset	R	right: reset
s	left: stop	S	right: stop

You can monitor the changes you are making using the following rostopics which you can monitor from a different shell:

rostopic echo /sdk/robot/limb/left/accessory/gripper/command_set

rostopic echo /sdk/robot/limb/right/accessory/gripper/command_set

Joystick Control

To use the example gripper program using a joystick game controller to control the grippers:

First ensure that joy drivers are installed.

$ rospack find joy

If not run:

$ sudo apt-get install ros-groovy-joystick-drivers

For Beta Version: To run the example:

$ rosrun gripper_control joystart <joystick_type>  

Where <joystick_type> is 'xbox', 'logitech', or 'ps3'.
(If using a ps3, make sure you run the node from the ROS ps3joy package in a separate sudo terminal. See instructions here: ps3joy )

For Alpha Version: To run the example:

$ roslaunch gripper_control joystick.launch joystick:=logitech

Note: This method uses an included ROS launch file to start both the gripper example and joy_node using the roslaunch tool. You can exit the gripper example by hitting any keyboard key, however you will have to ctrl-c to also cleanup the joy_node.

Joystick Button Mappings

NOTE: Don't forget to calibrate each gripper first.

Press any keyboard key to quit. (And no, the 'joystick left <-> robot right' mappings are not typos; they assume the user is in front of the robot when using the joystick.)

Buttons	Action	Buttons	Action
Function 1 or 2 (e.g. Select/Select)	Help	<Any Keyboard key>	Quit
Top Button	right: calibrate	Right Button	left: calibrate
Left Button	right: reset	Bottom Button	left: reset
Left Trigger [PRESS]	right: close	Right Trigger [PRESS]	left: close
Left Trigger [RELEASE]	right: open	Right Trigger [RELEASE]	left: open
Left Bumper	right: stop	Right Bumper	left: stop

Stick Axes	Action
Left Stick Horizontal	right: increase/decrease position
Right Stick Horizontal	left: increase/decrease position
Left Stick Vertical	right: increase/decrease holding force
Right Stick Vertical	left: increase/decrease holding force

Directional Pad (D-Pad)	Action
dPadUp	right: increase velocity
dPadRight	left: increase velocity
dPadLeft	right: decrease velocity
dPadDown	left: decrease velocity

Troubleshooting

For common issues specific to using gripper_control with Baxter, check out the Troubleshooting page.