config-pin P9_28 pwm doesn't start eCAP2_in_PWM2_out

[terachip]

Hi There,

In the config-pin utility, there is only one "pwm" option for pin P9_28. However P9_28 is either EHRPWM0_syncouin, or ECAPPWM2 output, which is far more useful. P9_28 can be set to PWM output via "echo pwm2 > state" in /sys/devices/platform/ocp/ocp:P9_28_pinmux, but it would be spiffy if the config-pin utility had both options.

Thanks,
terachip