Skip to content

Latest commit

 

History

History
15 lines (12 loc) · 944 Bytes

radio_setup.md

File metadata and controls

15 lines (12 loc) · 944 Bytes

Ubiquiti Bullet (Radio) Setup Guide

Connect the antenna to the Ubiquiti bullet. Plug in the PoE injector, and connect the PoE port to the bullet and the LAN port to your computer.

For Native OS

  1. In network settings, configure your ethernet adapter to have a static IPv4 address of with a subnet mask 255.255.255.0.
  2. Log in with username ubnt and password access.
  3. If you are configuring a non-access point, open https://192.168.1.20 in a browser. Log in with username ubnt and password station.

For Ubuntu VMs:

  1. Create a new network adapter for the VM in VirtualBox, and set it to a bridged connection. Initially, set the bridge to en0: Wi-Fi, otherwise the VM will not start.
  2. Once the VM has started, set the bridge to en5: USB Ethernet. This may be different based on your host OS.
  3. Follow the steps for Native OS on your VM.

Overview of Radio Network

network diagram