DS4 + Gyro + Parsec Streaming?

[zdpdsg]

Hi!
My current setup is :
Gaming pc at home that runs Cemu/Ryujinx and a Laptop with DS4 controller That connects to Gaming pc through Parsec.

How do I set it up in such a way that my gaming pc will recognize the gyro input from my ds4 controller connected to my laptop while running the game on a stream via Parsec? Laptop reads gyro just fine, tested with through ds4Windows and padtest.

Could I change the ip of the udp server for gyro in Ds4windows to the local ip of my gaming pc?

Any help appreciated!

[Yohoki]

I haven't tried using UDP for remote connections, but you should be able to do that. I believe you just need to set the IP in emulator settings. You'll probably also need to do some port forwarding in your router to make sure the port (probably 26760) in the settings is directed to your Laptop.

So....
In Cemu go to "Options-> Input settings -> Controller # -> Controller API -> DSUClient -> Settings". Here, you should put your Laptop's IP and port. Open that port on your Laptop's router. (Look up how to port forward for your specific router)

After that, you should have it working. You'll need to set your motion controls in "Options-> Gamepad Motion Source". I'll be honest I haven't used motion on Cemu, but if it's anything like Dolphin, it should be fairly easy to set up... But I don't see a way to configure the motion sources.... so hopefully they just match up correctly? ¯_(ツ)_/¯ Good luck.

[Yohoki]

To be clear, The UDP is running on your DS4Windows machine, not the Gaming Machine. So point your Gaming machine to D4W, not D4W to Gaming. So make sure the IP is set that way, and the port forwarding is done that direction.

[zdpdsg]

To keep things simple, I tried two computers on the same router, with Parsec Streaming, I succeed.
I set up UDP Server in DS4W like this.
Such as my Laptop with DS4 controller that IP is 192.168.0.7,
my Gaming pc IP is 192.168.0.5 .
I set UDP Server to 192.168.0.7 on Laptop DS4W.
and then put my Laptop's IP 192.168.0.7 and port 26760 on Ryujinx/Cemu of Gaming pc.
You can watch the video and check it out.

Now,The remaining question is port forward and NAT traverse？I would try next time.

8.16.1.mp4

[Pipyakas]

Parsec itself can also recognize the DS4 and passthrough the controller as a DS4 to the host, but currently DS4W on the host cannot pick it up as a DS4 yet
Maybe DS4W can pick up the DS4 passthrough from Parsec then everything would behave like you're playing on local, but not right now

[Yohoki]

Would the new feature "Enable OSC Server" in the settings tab help in this case? It is listening on port 9000. But I'm not entirely sure what it's listening for. Maybe it's helpful here, maybe not. I'm not sure if parsec's passthru would be picked up by the OSC listener. But it's worth a try.

[Pipyakas]

I've fiddled with the OSC server option for a bit and DS4W would always freeze on my host machine. There's also no log to speak of (it said OSC server listening on port 9000, but nothing more)
Steam does recognize the emulated DS4, but seems like no gyro info was transfered? So Parsec's passthrough might not be as good as I hoped