CHANGES.txt

V5.6.1
  New Features:
    * ChipWhisperer-Husky and CW310 Bergen Board support
    * Add `scope.fw_version_str`
    * Switch from pyusb to libusb1 - deprecates libusb0.dll on Windows
    * Add `as_int` parameter to `scope.get_last_trace()` to return traces as integers
    * Add driver detection for Windows
    * Add force and bitstream option to `cw.scope()`
    * Improve 50-naeusb.rules
    * Add SimpleSerial 2.1 and deprecate SimpleSerial 2.0 
    * Add ChipWhisperer version check. 
    * Add SAM3U firmware feature list and checks
    * Add common interface for USB scopes/targets
    * Add ability to connect to scope via hardware location
    * Add debugger support (via OpenOCD) to Lite, Pro, Nano, and Husky
    * Add GUI based Windows firmware installer
    * Add linting, automatic hardware testing, and firmware building actions
    * Add FW_CHANGES.txt

  Fixes:
    * Fix SS_VER_1_X and XMega simplserial-rsa
    * Fix SSV2 unstuff data for >30 zeros
    * Fix AVR lock bits read
    * Fix Nano connect status
    * Fix Nano scope.adc.clk_src not being changeable.
    * Explicit memory ordering in bootloader-glitch
    * Cast analyzer CPA calculations to long double to avoid precision issues in large projects
    * Fix Pro screen getting stuck when capturing
    * Checkout master branch for ChipWhisperer-Jupyter in installer
    * Fix timeout length on simpleserial reads
    * More versionadded/versionchanged for docs
    * Fix FPGA target.dis()
    * Fix DCM lock on glitch - caused issues with enable_only glitching (most noticable at high frequencies)
    * Fix TraceWhisperer verilog files not being installed in user mode
    * Fix issues with unintended double glitch on CWLite and Pro
    * Fix simple_PGE when key is numpy array
    * Don't try calculating pge if known_key not set
    * No longer overwrite builtins.bytearray
    * Fix memory numbers in STM32F3 linkerscript
    * Revert to old NewAE rules

  Firmware:
    * CWLite: 0.62.0
    * CWNano: 0.62.0
    * CWPro : 1.62.0
    * CW305 : 0.52.0
    * CWHusky: 1.2.0
    * CWBergen: 1.2.0

V5.5
  New Features:
    * Re-add SAKURA-G support
    * **TraceWhisperer cleanup + convenience functions**
    * ChipWhisperer firmware `auto_program()`
    * **Add segmented capture to ChipWhisperer, allowing for super fast capture**
    * **Add simpleserial-ecc**
    * **New demo: uECC attack**
    * **New ChipWhisperer Firmware: CDC serial ports for UART communication (i.e. communication with `"COMX"`/`"/dev/ttyACMX"`**
    * **New target class: SimpleSerial2_CDC with automatic serial port detection (no need to figure out `"COMX"`/`"/dev/ttyACMX"`)**
    * Add simpleserial documentation (thanks @coastalwhite !)
    * Add new simpleserial commands to get available commands
    * Add maskedAES for more targets (thanks @jmichelp !)
    * Add better method for loading new CW bitstream
    * Add avr-gcc and arm-gcc to installer (optional)

  Fixes:
    * Add CWPro aux_out
    * Update ESP32 build for newer build system version
    * Reset Xmega if programming fails (should prevent programming from immediately failing next call)
    * Setup script improvements
    * Fix outdated 99-rules.newae
    * Fix voltage range on CW305 VCCINT
    * Fix STM32F4 HW floating point (thanks @mcsmonk !)
    * Fix Nano crash when >128 bytes read from USART
    * VM now supports uploading firmware to chipwhisperer
    * Fix pipe error caused by interrupting USB communications

V5.4
  New Features:
    * AES MixColumns Attack and Variable Vector KTP (requires scared/estraces)
    * Update FW for USB devices - auto configure as WinUSB
    * Update FW to increase serial buffer
    * Support both libusb0 and libusb1
    * Add automated plotting functions for analyzer plots
    * Add TraceWhisperer
    * Improve CW305 AES implementation
    * Add cw.plot()
    * Add scope.sn
    * Major CWNano speedup
    * Analyzer autoplots
    * Add SimpleSerialV2 (not used by default) binary serial protocol
        - Use 230400bps for SSV2 baud
        - Major capture speedup when using SSV2
    * New experiment/target class: CW305 HW ECC
    * Add CW305 register name autodetect
    * Add glitch arm timing of "no_glitch" (moderate speedup for SSV2)
  Fixes:
    * target.baud not being reset correctly after programming STM32
    * Turn of STM32 HW floating point
    

V5.3.1
  New Features:
    * New CWPro firmware
      - Add in_waiting_tx for Pro
    * Public target.in_waiting_tx()
    * Add SAMFWLoader CWPro support
    * Add CWPro USB binary
  Fixes:
    * Fix TIO state read on CWPro
    * Fix tx buffer overrun on CWPro

V5.3.0
 New Features:
  * New CW305 USB firmware
  * New CWLite/CWNano USB firmware
  * Major tutorial overhaul
    - Tutorials now built for https://learn.chipwhisperer.io
    - Includes both remastered and all new tutorials
    - Add prerecorded traces to power analysis labs
  * New tutorials (SCA101):
    - Lab 3_1 - Recovering Data from a Single Bit
    - Lab 6_4 - Jittery Triggering on UART
  * New tutorials (Fault101):
    - Voltage glitch versions of clock glitch tutorials
  * New tutorials (SCA201):
    - Dynamic Time Warp resync
    - Hardware AES lab
  * New tutorials (Fault201):
    - Introduction to AES Fault Attacks
    - AES Loop Skip Fault attack
    - 1.5 Round AES Attack
    - DFA Attack Against Final MixColumns
  * New hardware documentation at https://rtfm.newae.com
  * Add documented way to read state of TIO1-4 on Lite/Pro
  * Add glitch controller for improved glitch recording
  * Add API reprogramming supports for Nano and CW305
  * Add T-Table enc/dec leakage models
  * Add __array__() function to IndividualIterable (allows conversion to numpy array)
  * Add tqdm to preprocessing
  * Add batch run for CW305 for fast capture
  * Add SPI Programming for CW305
  * Add default FPGA programming for CW305
 Fixes:
  * Make Nano serial and capture more reliable
  * Improve Nano reliablity in VM
  * Build fixes for STM32F3 and STM32L5
  * Greatly improved reliablity OpenADC long offset captures
  * Make target.SimpleSerial more robust
  * Fix tx buffer overrun 

V5.2.0
 New Features:  
  * CW-Lite/Pro: Increase maximum glitch repeat to 8192
  * CW-Lite/Pro: Add nRESET as trigger input
  * Targets: Add RT1062 HAL (NXP Cross-over MCU)
  * Targets: Add EFR32MG21 HAL (SiLabs with 'secure element')
  * Targets: Add FE310 HAL (RISC-V)
  * Targets: Add STM32L5 HAL (NXP M33)
  * Add option to allow more specific hardware AES engine triggers
  * Add SAD section to SPA_1
  * Small fixes to SPA_2
  * SimpleSerial additions:
    - simpleserial_read_witherrors
    - Define return for simpleserial_wait_ack
    - simpleserial_last_sent
    - simpleserial_last_read
 Fixes:
  * CW-Lite/Pro: Fix glitch logic which was not correctly gating output - start and end edge were slightly off
  * Fix HW float being used on STM32F3 instead of software float
    - This also fixes a crash related to the wrong C library being used on older (pre q2-2018) gcc versions
  * Allow STM32F3 to use different input clock speeds (was previously fixed to 7.37MHz)
  * Fix STM32F3 programming timeout
  * Expand tests
  * Add ack option to capture_trace()  
  * Fix project not saving correctly when multiple segments used
  * Code cleanup
  * Various other fixes

V5.1.3
  * Windows installer (released)
  * Improvements to Jupyter notebooks - use real-time plotting during capture, various small fixes
  * New LPC1114 Jupyter tutorial
  * Add PSOC62 HAL, fix NRF52840 HAL and SAM4L HAL
  * Add CW-Nano firmware source + schematics

V5.1.2:
  * Windows installer
  * Fix PGE calculation and known key highlighting for attacks which don't
    target the base key.

V5.1.1:
  * Fix STM32F baud setting
  * Update Jupyter requirements to have everything needed to run all tutorials
  * Fix chipwhisperer autodetect when nothing attached

V5.1.0:
  * Tutorial Updates:
      - New tutorial: Fault_5-RSA_Fault_Attack
      - New tutorial: Fault_2-Introduction_to_Vcc_Glitch_Attacks
      - New tutorial: PA_DPA_3-AES_DPA_Attack
      - New tutorial: PA_HW_Pro_1 added
      - New tutorial: !!Introduction_to_Jupyter!!
      - Fault_4 updated for new API
      - Tutorials now list supported hardware at the top of the tutorial
      - Improved support for non-CWLITEARM targets
      - Tutorial tests now output .rst files for Read the Docs
      - Change Setup.ipynb to Setup_Generic.ipynb
  * Scope updates:
      - Added default_setup() method
      - cw.scope() can now autodetect scope type
      - CWPro only features updated to work with API
  * Project updates:
      - Major project API updates
      - New project format
  * CW1200 Pro only features added to API
  * Completed tutorials now available on Read the Docs
  * Added tutorials submodule for completed tutorial .rst files
  * Key text pair interface updated
  * Added cw.capture_trace()
  * Moved Jupyter to Submodule in top of project
  * Separated requirements.txt into Jupyter (in Jupyter submodule) and non Jupyter files
  * Changed to snake_case instead of camelCase
  * Added Sphinx documentation
  * API now documented with Google Style Guide
  * Many tutorial changes to reflect API changes
  * Changed tutorials to use C preprocessor to change firmware rather than via awk
  * C firmware CRYPTO_TARGET no longer defaults to AVRCRYPTOLIB
  * CW308_AURIX clock and regulator fixes
  * Fixed generate_firmware_files.py for python3
  * Removed some unused files
  * Expose baud for STM32 programmer
  * Fixed XMEGA and STM32 programming issues
  * Fixed "Trigger not found in ADC data" issue
  * Improved CW305 support


V5.0.1:
  * Fixed project loading
  * Initial CW305 Support
  * Various small fixes

V5.0.0:
  * Replaced GUI with Jupyter
  * Moved to Python 3 (Python 2.7 no longer supported)
  * Improved API for Projects
  * Added GUILess Analyzer support
  * Added Jupyter Notebooks for most major tutorials
  * Added Notebooks for new tutorials
  * Small cleanups to API

V4.0.2:
  * Improve SAD logic
  * Add RSA firmware build for ARM.
  * Add new setup scripts (CEC1702, ESP32)
  * Various small fixes

V4.0.1:
  * State for GUI Programmers is not held in between actions, allowing the programmers to be left open during captures/glitching without causing problems
  * The GUI programmers now use the 4.0 api to set pins for programming, saving pin states before an action to restore them after.
  * Most firmware files are now compatible with the ARM compiler
  * Example scripts in chipwhisperer/software/scripting-examples have been updated for 4.0, providing an example of using the ChipWhisperer tool without the GUI for clock glitching, trace capture during encryption, and trace analysis.

V4.0.0:
  * Rewritten script interface, now almost all work is done via preconfigured scripts
  * New API allows direct access to configuration (useful with new script architecture)
  * New firmware examples (ESP32, Spartan 6 cheap FPGA board)


V3.5.3:
  * FW: Add RSA firmware example (see https://wiki.newae.com/Tutorial_B11_Breaking_RSA)
  * FW: Add MBED TLS crypto library for ARM targets (see https://wiki.newae.com/Tutorial_A8_32bit_AES)
  * SW: Add utility to copy traces to new project
  * Capture: Add ability to measure "Trigger High" length in number of samples
  * FW: Fix trigger GPIO pin in STM32F4 HAL
  * FW: Fix AVR "sizeafter" target in makefile
  * SW: Update testing scripts to use os.path and auto-program for XMEGA programming
  * Capture: Fix timer bug in CW1173 Reset aux module

V3.5.0:
  * SW: Allow each module to set a default error message severity
  * Capture: Support connecting multiple CW-Lite/Pro scopes
  * Capture: Add SPI flash programmer target
  * Capture: Add STM32F programmer
  * Capture: Add setup script for 87C51 target
  * FW: Fix bug in SAM4L HAL that disabled crypto countermeasures
  * FW: Improve Makefile output on Windows
  * SW: Return script results when running Capture/Analyzer scripts via API
  * Analyzer: Fix off-by-one error in C-accelerated CPA attack
  * Capture: Properly randomize fixed/random plaintexts in CRI T-Test mode
  * Capture: Fix float/int conversion bug in glitch explorer

V3.4.0:
  * Addition of trace-cache in preprocessing module, useful with slow preprocessing module.
  * Dynamic Time Warp (DTW) based trace resync preprocessing, based on the "Elastic Alignment" paper by Jasper
  * SimpleSerial firmware V1.1 now supports ACK in messaage structure, useful in slow encryptions to avoid timeout
  * STM32F firmware targets (including STM32F0, F1, F2, F3, F4)
  * New trace plotting command allows plotting arbitrary traces (not just range), along with specific colours.

V3.3.0:
  * CW1200 support added (bitstream built-in, various fixes for CW1200)
  * New firmware build system supports targets beyond AVR/XMEGA (now can build for STM32F, etc)
  * Add downsample mode for CWLite, CW1200 (make better use of sample buffer by downsampling ADC to get very slow sampler rates)
  * New simple AES crypto library for firmware targets
  * Huge speed-up to waveform data processing on capture
  * Support automatic downsampling of waveform display (requires recent version of pyqtgraph)

V3.2.0:
  * Updated HW model system, breaks some old APIs but makes it easier to add custom leakage models
  * Fixed bug where unplugging CW-Lite with terminal open caused flood of close messages
  * Fixes to CW305 interface
  * AVR Programmer adds ATMegaRF2564RFR2 device support

V3.1.11:
  * Added support to DES (recovers 48 of the 56 bits key)
  * Refactored attack classes

V3.1.10:
  * Added basic support to multiple channels (doesn't save yet).
  * Trace Output Plot widget with new parameter: X Axis with time values.
  * New Streaming mode capture option.

V3.1.9:
  * Improved serial terminal.
  * Added stop capture button.
  * Fixed a lot of memory leaks.
  * New trace manager (supports deletion of multiple items).
  * Pip support.
  * Support to projects/plugins in user's home.
  * Test scripts.
  * Improved code documentation.
  * Code cleanups.
  * New Glitch Explorer widget.
  * Bandstop digital filter option (credits to Marc).
  * Removed parentParam argument from many classes (some older scripts may need to delete it to come back to live) :-/
  * Added buttons to load and save settings.
  * Project settings saved with the traces during capture.
  * Logging.

V3.1.8:
  * Read/save buttons.
  * Trace recorder.
  * Graph widget: hairlines, grid, move, help, select trace, position.
  * Check for updates.
  * New Parameter class. API runs standalone now (especially the capture tool).
  * Customizable key/trace colors.
  * Results table with color gradient.
  * Faster graphs plotting, especially in fast mode.
  * Fixed a bug where highlighted traces for other keys would not show up.
  * Trace Explorer moved to the main window as a settings dock.
  * Bug fixes.

V3.0:
  * Consolidate project (move traces to the project dir).
  * Improved trace manager.
  * Fixed GUI bugs with Mac OS X.
  * New plugin architecture (should be much easier to add new modules).
  * Bug fixes.
  * Large code refactoring.