diff --git a/Developers.md b/Developers.md index 4a718be..e923458 100644 --- a/Developers.md +++ b/Developers.md @@ -3,8 +3,8 @@ JetBrains are providing "All Products Pack" licenses free of charge for SickChill developers as part of their support of OSS. https://jb.gg/OpenSourceSupport -If you want to join the development team let us know in [discussions](https://github.com/SickChill/sickchill/discussions). +If you want to join the development team let us know in [Discord](https://discord.com/invite/U8WPBdf). -[Windows Developer Setup](https://github.com/SickChill/SickChill/wiki/SickChill-Developer-Windows-Setup) +[Windows Developer Setup](SickChill-Developer-Windows-Setup.md) -[Development Environment Setup](https://github.com/SickChill/SickChill/wiki/How-to-setup-a-development-enviroment) +[Development Environment Setup](How-to-setup-a-development-enviroment.md) diff --git a/FAQ's-and-Fixes.md b/FAQ's-and-Fixes.md index 72ca5f0..58c334c 100644 --- a/FAQ's-and-Fixes.md +++ b/FAQ's-and-Fixes.md @@ -16,7 +16,7 @@ - [What is post processing?](#what-is-post-processing) - [How do the quality settings for a show work?](#how-do-the-quality-settings-for-a-show-work) - [Newly aired shows are not downloading and set to skipped/ignored?](#newly-aired-shows-are-not-downloading-and-set-to-skippedignored) -- [How to Disable and Remove SickChill autostart (systemctl) ?](/#how-to-disable-and-remove-sickchill-from-autostart-systemctl-) +- [How to Disable and Remove SickChill autostart (systemctl) ?](#how-to-disable-and-remove-sickchill-from-autostart-systemctl-) - [Post-processing shows a negative time](#post-processing-shows-a-negative-time) - [What is a network time zone warning?](#what-is-a-network-time-zone-warning) - [Unable to send torrent to synology download station](#unable-to-send-torrent-to-synology-download-station) @@ -40,7 +40,7 @@ If you like to upload the log you can use [pastebin] (http://pastebin.org) or an Yes. There are pre-built NAS versions of SickChill: - Synology, QNAP, Asustor, Thecus and many others. - See the [SickChill installation packages](https://github.com/SickChill/SickChill/wiki/SickChill-installation-packages) section. + See the [SickChill installation packages](SickChill-installation-packages.md) section. ## Windows Shares and Mapped Drives @@ -54,7 +54,7 @@ You can type these paths at the top of the browse dialog popups in SickChill and If you encounter torrents/nzbs that use different show names than the one supplied from TheTVDb, you can add a Scene Exception to your show [Go to Show, Edit Show] with the name that the releases are using. An example is when you have two shows with the same name. To differentiate between the two, uploaders generally will add the premiere year of the show. i.e. _Revolution_, i.e. _Revolution (2012)_ -For more information see the [Scene exceptions and numbering](https://github.com/SickChill/SickChill/wiki/Scene-exceptions-and-numbering) section. +For more information see the [Scene exceptions and numbering](Scene-exceptions-and-numbering.md) section. ## Error while searching ..., skipping: 'NoneType' object is not iterable @@ -89,7 +89,7 @@ You can reinstall SickChill through pip, see [pip](). ## I'm currently using the SABtoSickbeard script with SABNZB, however failed downloads don't work. -Switch to the [NZBtoMedia](https://github.com/SickChill/SickChill/wiki/NZBtoMedia) scripts. The package contains a script called NZBtoSickbeard. This will provide full and automatic failed download handling. Installation is almost identical as the SABtoSickbeard script. +Switch to the [NZBtoMedia](NZBtoMedia.md) scripts. The package contains a script called NZBtoSickbeard. This will provide full and automatic failed download handling. Installation is almost identical as the SABtoSickbeard script. ## Error: Rar Not Supported: No suitable RAR unpacker installed @@ -115,28 +115,28 @@ To install `unrar`: ## I'm getting SSL errors what now? An SSL error looks generally something like this: `_ssl.c:499: error:14077438:SSL routines:SSL23_GET_SERVER_HELLO:tlsv1 alert internal error` -They are mainly the cause of not having Python installed correctly. Python needs to have the pyOpenSSL & cryptography modules installed to handle HTTPS connections. For more information see the [SSL Errors](https://github.com/SickChill/SickChill/wiki/SSL-Errors) section. Note, [QNAP](https://github.com/SickChill/SickChill/wiki/SickChill-installation-packages#qnap) users need to have a recent SickChill package installed. +They are mainly the cause of not having Python installed correctly. Python needs to have the pyOpenSSL & cryptography modules installed to handle HTTPS connections. Note, [QNAP](SickChill-installation-packages.md#Qnap) users need to have a recent SickChill package installed. ## Can I support SickChill and How? -Yes, absolutely! We are always looking for help. If you are familiar with Python, HTML, Java or other programming languages, please give a shout. Also, if you have experience moderating and want to help users by solving/answering their basic questions regarding SickChill, feel free to help on the SickChill [Issue Tracker](https://github.com/SickChill/SickChill) and [IRC Channel](https://kiwiirc.com/client/irc.freenode.net/?theme=basic#sickchill-issues). Last, there is the option to [Donate](https://github.com/SickChill/SickChill/wiki/Donations). That helps us pay for the upkeep/maintaining cost of the SickChill project. +Yes, absolutely! We are always looking for help. If you are familiar with Python, HTML, Java or other programming languages, please give a shout. Also, if you have experience moderating and want to help users by solving/answering their basic questions regarding SickChill, feel free to help on the SickChill [Issue Tracker](https://github.com/SickChill/SickChill) and [IRC Channel](https://kiwiirc.com/client/irc.freenode.net/?theme=basic#sickchill-issues). Last, there is the option to [Donate](Donations.md). That helps us pay for the upkeep/maintaining cost of the SickChill project. ## What does the Episode Status mean and what does it do? The Episode Status shows (like the name implies) the status of an episode. So is it downloaded and in what quality? Or is it still Wanted? Or skipped? For an extended explanation see the -[Episode Status](https://github.com/SickChill/SickChill/wiki/Episode-Status) section. +[Episode Status](Episode-Status.md) section. ## One of my shows has a missing Network logo. -SickChill uses a network logo to indicate the network on which the show aired. However, with countless networks worldwide it's impossible to keep track/add every logo. If you come across a missing logo please report it (or, when you are able, submit it). For more information see the [Network logos](https://github.com/SickChill/SickChill/wiki/Network-logos) section. +SickChill uses a network logo to indicate the network on which the show aired. However, with countless networks worldwide it's impossible to keep track/add every logo. If you come across a missing logo please report it (or, when you are able, submit it). For more information see the [Network logos](Network-logos.md) section. ## What is post processing? -After an episode is downloaded you can automatically modify/change/work on the file. Post processing is the name for this process. It can include a message from your download client (Sabnzb) to SickChill that the file was downloaded, to renaming the episode, or any other form of modifying/testing. Out of the box SickChill contains many options you can use, but if you want even more options then check out the [NZBToMedia](https://github.com/clinton-hall/nzbToMedia) scripts. Also see the [Post-Processing](https://github.com/SickChill/SickChill/wiki/Post-Processing) section. +After an episode is downloaded you can automatically modify/change/work on the file. Post processing is the name for this process. It can include a message from your download client (Sabnzb) to SickChill that the file was downloaded, to renaming the episode, or any other form of modifying/testing. Out of the box SickChill contains many options you can use, but if you want even more options then check out the [NZBToMedia](https://github.com/clinton-hall/nzbToMedia) scripts. Also see the [Post-Processing](Post-Processing.md) section. ## How do the quality settings for a show work? -One of the most important things in SickChill are the Quality Settings. The Quality Settings allow you to instruct SickChill what the quality should be and if it should be snatched, or left alone. For a more detailed explanation see the [Quality Settings](https://github.com/SickChill/SickChill/wiki/Quality-Settings) section. +One of the most important things in SickChill are the Quality Settings. The Quality Settings allow you to instruct SickChill what the quality should be and if it should be snatched, or left alone. For a more detailed explanation see the [Quality Settings](Quality-Settings.md) section. ## Newly aired shows are not downloading and set to skipped/ignored? @@ -165,7 +165,7 @@ systemctl reset-failed ## Post Processing shows a negative time In rare cases the Post Processing stops working and will show a negative time in the -[server status overview](https://cloud.githubusercontent.com/assets/7232810/12236081/a17e4fec-b82c-11e5-8a37-1d58646e766a.png). The cause is a single/bad/corrupt file where PP hangs on, and therefore can't be processed/finished. Your log should be able to tell you which file, then you simply need to remove it. +[server status overview](images/serverstatusoverview.png). The cause is a single/bad/corrupt file where PP hangs on, and therefore can't be processed/finished. Your log should be able to tell you which file, then you simply need to remove it. ## What is a network time zone warning? @@ -185,11 +185,11 @@ SickChill supports Synology's Download Station (DLS), but some users can run int One of those is: `WARNING SEARCHQUEUE-BACKLOG-281620 :: [9149089] DownloadStation: Unable to send Torrent ` There are a few things you should check if this happens. -First, check if the connection test works in the search settings. If that does work then the authentication with DSM is Ok. Then check the following. : +First, check if the connection test works in the search settings. If that does work then the authentication with DSM is Ok. Then check the following : - If it's a new DSM account you need to log into DLS with that account first and set a default download folder. - Does it work with an administrator account.? -- If it's a custom created folder then set share (folder) permissions in to username sc-sickchill & sc-download (DSM6) or synocommunity (DSM7) as group. [Syno Permissions](https://github.com/SickChill/SickChill/wiki/Synology-install#Synology-SickChill-Permissions) +- If it's a custom created folder then set share (folder) permissions in to username sc-sickchill & sc-download (DSM6) or synocommunity (DSM7) as group. [Syno Permissions](Synology-install.md#Synology-SickChill-Permissions) - If path is left blank it will auto populate or enter path but remove `/volume1/` from the path in the settings. When all else fails then you could also use the black-hole method as a workaround. SickChill will store the nzb/torrent in a folder of your choosing. diff --git a/Git-merge.md b/Git-merge.md index 63d745d..d4adf94 100644 --- a/Git-merge.md +++ b/Git-merge.md @@ -7,9 +7,9 @@ ### Index -- [Merge develop into master](https://github.com/SickChill/SickChill/wiki/Git-merge#merge-develop-into-master) -- [Merge a PR via command line](https://github.com/SickChill/SickChill/wiki/Git-merge#Merge-a-PR-via-command-line) -- [Merge a hotfix(master and develop)](https://github.com/SickChill/SickChill/wiki/Git-merge#merge-a-hotfixmaster-and-develop) +- [Merge develop into master](#Merge-develop-into-master) +- [Merge a PR via command line](#Merge-a-PR-via-command-line) +- [Merge a hotfix(master and develop)](#merge-a-hotfixmaster-and-develop) --- diff --git a/Home.md b/Home.md index d1038a9..bc49fe1 100644 --- a/Home.md +++ b/Home.md @@ -2,7 +2,7 @@ Hello and welcome! This wiki is here to help you set up and use SickChill. You'll find setup guides, explanations of settings and errors, and answers to frequently asked questions. -On the right side of the page you see the available wiki pages. For new users, you probably want the [Installation & Setup guides](https://github.com/SickChill/SickChill/wiki/Installation-&-Configuration-Guides), if you want to join the [Developers](https://github.com/SickChill/SickChill/wiki/Developers) here's some basics. +On the right side of the page you see the available wiki pages. For new users, you probably want the [Installation & Setup guides](Installation-&-Configuration-Guides), if you want to join the [Developers](Developers.md) here's some basics. If you encounter a bug, please open an [issue](https://github.com/SickChill/SickChill/issues) and take a look in [discussions](https://github.com/SickChill/sickchill/discussions) too. @@ -12,7 +12,7 @@ These documents are a work-in-progress. If you'd like to contribute, please get - [Issues / Bug reports](https://github.com/SickChill/SickChill/issues) - [Discussions / Feature requests](https://github.com/SickChill/SickChill/discussions) -- [Donations](https://github.com/SickChill/SickChill/wiki/Donations) +- [Donations](Donations.md) --- diff --git a/Installation-&-Configuration-Guides.md b/Installation-&-Configuration-Guides.md index 92a0f17..babdef8 100644 --- a/Installation-&-Configuration-Guides.md +++ b/Installation-&-Configuration-Guides.md @@ -11,17 +11,17 @@ Make sure you use `https://github.com/SickChill/SickChill.git` New to SickChill? Then the below guides will help you with the setup, and discover all its cool features. -- [Docker](https://github.com/SickChill/SickChill/wiki/Docker) -- [Pip](https://github.com/SickChill/SickChill/wiki/Pip) +- [Docker](Docker.md) +- [Pip](Pip.md) - [Windows](https://github.com/SickChill/SickChillInstaller/releases/latest) -- [Freenas](https://github.com/SickChill/SickChill/wiki/Freenas) -- [ReadyNAS](https://github.com/SickChill/SickChill/wiki/ReadyNAS) -- [Synology](https://github.com/SickChill/SickChill/wiki/Synology) +- [Freenas](Freenas.md) +- [ReadyNAS](ReadyNAS.md) +- [Synology](Synology.md) - [QNAP](https://github.com/OneCDOnly/sherpa) ###### Setup NZBtoMedia for SickChill -- https://github.com/SickChill/SickChill/wiki/NZBtoMedia +- [NZBtoMedia](NZBtoMedia.md) --- @@ -32,9 +32,9 @@ Read the IMPORTANT NOTE below before following any guides `SickChill Repository ###### Windows cryptography -- https://github.com/SickChill/SickChill/wiki/SickChill-Windows-Installer +- [SickChill-Windows-Installer](SickChill-Windows-Installer.md) - (Manual installation guides for Windows can be found [here](https://github.com/SickChill/SickChill/wiki/SickChill-Windows-Installer#manual-installation-guides-for-windows).) + (Manual installation guides for Windows can be found [here](SickChill-Windows-Installer.md#manual-installation-guides-for-windows).) ###### Synology: diff --git a/NZBtoMedia.md b/NZBtoMedia.md index e8d470c..123dd66 100644 --- a/NZBtoMedia.md +++ b/NZBtoMedia.md @@ -1,8 +1,8 @@ ## What is NZBtoMedia? -NZBtoMedia is a collection of scripts for [post-processing](https://github.com/SickChill/SickChill/wiki/Post-Processing). +NZBtoMedia is a collection of scripts for [post-processing](Post-Processing.md). Normally SickChill scans the download folder for new files/downloads every 10 minutes. However, that prevents the hard disks from going into sleep/hibernation. Scripts on the other hand let SickChill instantly know if a download was completed. Therefore, the scanning of the `tv download folder` isn't necessary anymore. -Another advantage is that other [post-processing](https://github.com/SickChill/SickChill/wiki/Post-Processing) options can be done before the file is sent to SickChill. But most of those options are already included in SickChill, so you probably won't use them. +Another advantage is that other [post-processing](Post-Processing.md) options can be done before the file is sent to SickChill. But most of those options are already included in SickChill, so you probably won't use them. Last and probably the MOST important reason, it supports failed downloads. This means that when your client fails to download the file a notification gets sent to SickChill and a new search gets started, with hopefully now a valid file. ## Before you start @@ -28,7 +28,7 @@ For more info see [NZBtoMedia's Repo](https://github.com/clinton-hall/nzbToMedia ## How to setup NZBtoMedia with NZBget The good news is that NZBget has NZBtoMedia support built into the program. This allows for easy configuration. -First, you need to make sure that NZBget points to the NZBtoMedia files. Sometimes the files are included in the NZBget/Scripts folder. However, if they are not you have two options. Manually download the latest NZBtoMedia [package](https://github.com/clinton-hall/nzbToMedia/archive/master.zip) and unpack them there. Or point to the NZBtoMedia folder included within SickChill. This can be done in NZBGet by going to Settings --> PATHS --> `ScriptDir`. +First, you need to make sure that NZBget points to the NZBtoMedia files. Sometimes the files are included in the ~~NZBget~~/Scripts folder. However, if they are not you have two options. Manually download the latest NZBtoMedia [package](https://github.com/clinton-hall/nzbToMedia/archive/master.zip) and unpack them there. Or point to the NZBtoMedia folder included within SickChill. This can be done in NZBGet by going to Settings --> PATHS --> `ScriptDir`. ![naamloos](images/NZBtoMedianaamloos.png) @@ -79,7 +79,7 @@ First locate your `contrib` folder where NZBtoMedia is located, or download/inst Copy the `autoProcessMedia.cfg.spec` file and rename it to `autoProcessMedia.cfg` in the same folder. Now open the `autoProcessMedia.cfg` with your favorite editor. -Go to the `[SickBeard]` section and add/change the following settings. : +Go to the `[SickBeard]` section and add/change the following settings : `[SickBeard]` @@ -90,7 +90,7 @@ Go to the `[SickBeard]` section and add/change the following settings. : - `password =` (Add your password if you have enabled login in SickChill) - `fork =` (Only replace `auto` with `sickchill` if detection problems) -Go to the `[Nzb]` section and add/change the following settings. : +Go to the `[Nzb]` section and add/change the following settings : `[Nzb]` @@ -109,12 +109,12 @@ That's it. Now save the file. ![02a04048-5bab-11e5-9f25-a14f4fa42566](images/NZBtoMedia6.png) First step is to let SABnzbd know where the NZBtoMedia scripts are located. -Do this by going to. : `Config` -> `Folders` -> `User Folders` -> `Post-Processing Scripts Folder` +Do this by going to : `Config` -> `Folders` -> `User Folders` -> `Post-Processing Scripts Folder` Now browse to the location where they are located and save the new path. ![1](images/NZBtoMedia1.png) -The second step is to setup the categories. When SickChill sends an nzb to SABnzbd it adds a tag. the defealt is `tv`. The Categories allow to run a script when a certain tag is sent/found by SABnzbd. +The second step is to setup the categories. When SickChill sends an nzb to SABnzbd it adds a tag. the default is `tv`. The Categories allow to run a script when a certain tag is sent/found by SABnzbd. In our case we want to do this with the tag `tv` that SickChill uses. Go to : `Config` -> `Categories` @@ -135,6 +135,6 @@ With the release of SABnzbd version 0.7.5 a new special parameter named "empty_p Go to : `Config` -> `Special` -> `empty_postproc (on)` And change the setting to off. -A successful run of the script should look like this in SABnzbd. : +A successful run of the script should look like this in SABnzbd : ![5](images/NZBtoMedia5.png) diff --git a/Post-Processing.md b/Post-Processing.md index c77af79..4e5d2f3 100644 --- a/Post-Processing.md +++ b/Post-Processing.md @@ -4,8 +4,8 @@ Post Processing is a name for a collection of actions that are taken after a fil ## Post Processing Explained -To start Post Processing in SickChill you have 3 possibilities. The fist (default) one is to let SickChill scan/monitor the `TV Download Dir` for newly downloaded episodes by your download client. Once SickChill detects a new file the Post processing starts. The second possibility is [Manual Post Processing](https://github.com/SickChill/SickChill/wiki/Post-Processing#manual-post-processing). The third method is using a script to inform SickChill that a new episode was downloaded. This is the ideal/preferred way for NAS devices. As this method doesn't need the constant scanning of the `TV Download Dir` it will allow the hard disks to go into sleep. Some might already be familiar with the SABtoSickbeard script that is used in combination with SABNZBz. However not all download clients support the running of those scripts after a download so SickChill can be informed. -For more detailed information about an individual setting see the [Main Settings Wiki](https://github.com/SickChill/SickChill/wiki/Settings-explained#post-processing). +To start Post Processing in SickChill you have 3 possibilities. The fist (default) one is to let SickChill scan/monitor the `TV Download Dir` for newly downloaded episodes by your download client. Once SickChill detects a new file the Post processing starts. The second possibility is [Manual Post Processing](Post-Processing.md#manual-post-processing). The third method is using a script to inform SickChill that a new episode was downloaded. This is the ideal/preferred way for NAS devices. As this method doesn't need the constant scanning of the `TV Download Dir` it will allow the hard disks to go into sleep. Some might already be familiar with the SABtoSickbeard script that is used in combination with SABNZBz. However not all download clients support the running of those scripts after a download so SickChill can be informed. +For more detailed information about an individual setting see the [Main Settings Wiki](Settings-explained.md#post-processing). ## Manual Post Processing diff --git a/Quality-Settings.md b/Quality-Settings.md index 5ece46f..7128bf7 100644 --- a/Quality-Settings.md +++ b/Quality-Settings.md @@ -1,6 +1,6 @@ --- -[ [Quality Settings] ](https://github.com/SickChill/SickChill/wiki/Quality-Settings#quality-settings) [ [Quality detection/determination] ](https://github.com/SickChill/SickChill/wiki/Quality-Settings#quality-detectiondetermination) [ [Quality names to recognize the Quality of a file] ](https://github.com/SickChill/SickChill/wiki/Quality-Settings#quality-names-to-recognize-the-quality-of-a-file) [ [Difference between Preset and Custom Qualities] ](https://github.com/SickChill/SickChill/wiki/Quality-Settings#difference-between-preset-and-custom-qualities) [ [Preset Qualities] ](https://github.com/SickChill/SickChill/wiki/Quality-Settings#preset-qualities) [ [Custom Qualities] ](https://github.com/SickChill/SickChill/wiki/Quality-Settings#custom-qualities) [ [Example Advanced Custom Qualities] ](https://github.com/SickChill/SickChill/wiki/Quality-Settings#example-advanced-custom-qualities) [ [Media Extensions] ](https://github.com/SickChill/SickChill/wiki/Quality-Settings#media-extensions) +[ [Quality Settings] ](#quality-settings) [ [Quality detection/determination] ](#quality-detectiondetermination) [ [Quality names to recognize the Quality of a file] ](#quality-names-to-recognize-the-quality-of-a-file) [ [Difference between Preset and Custom Qualities] ](#difference-between-preset-and-custom-qualities) [ [Preset Qualities] ](#preset-qualities) [ [Custom Qualities] ](#custom-qualities) [ [Example Advanced Custom Qualities] ](#example-advanced-custom-qualities) [ [Media Extensions] ](#media-extensions) --- @@ -8,7 +8,7 @@ There have been some recent changes/modifications to the qualities. For more info check the temporary link below. -https://github.com/SickChill/SickChill/wiki/Qualities-Changes +[Qualities-Changes](Qualities-Changes.md) ## Quality Settings @@ -52,13 +52,13 @@ This shows you what a title needs to contain to be recognized as a Quality in Si Note: All `RIP` qualities can have either `rip` or `mux` in the filename. ( Example: WEBRip and WEBMux ) -(All of these settings will find files with the required [Media Extensions](https://github.com/SickChill/SickChill/wiki/Quality-Settings#media-extensions).) +(All of these settings will find files with the required [Media Extensions](#media-extensions).) This quality determination also applies to imported/already downloaded files. So when you rename your files and they don't include the valid quality names, they can be detected as `Unknown` by SickChill.! ## Difference between Preset and Custom Qualities -Now that you are aware of what a title needs to contain, we can proceed with actually choosing and setting a quality. There are two ways to setup your wanted quality's. [Preset Qualities](https://github.com/SickChill/SickChill/wiki/Quality-Settings#preset-qualities) witch are pre-configured quality options that you can select or [Custom Qualities](https://github.com/SickChill/SickChill/wiki/Quality-Settings#custom-qualities) if you want to set your own advanced wanted quality's. +Now that you are aware of what a title needs to contain, we can proceed with actually choosing and setting a quality. There are two ways to setup your wanted quality's. [Preset Qualities](#preset-qualities) witch are pre-configured quality options that you can select or [Custom Qualities](#custom-qualities) if you want to set your own advanced wanted quality's. ## Preset Qualities @@ -75,7 +75,7 @@ You can set more than one Present quality per show. But be aware that the first - **HD** - HD TV or 1080p HD TV or 720p WEB-DL or 1080p WEB-DL or 720p BluRay or 1080p BluRay - **Custom** - - Custom Quality gives you the Allowed and Preferred menus, outlined under [Custom Qualities](https://github.com/SickChill/SickChill/wiki/Quality-Settings#custom-qualities) + - Custom Quality gives you the Allowed and Preferred menus, outlined under [Custom Qualities](#custom-qualities) Let's give you some real world examples that you need to consider selecting the quality. For new/popular shows, you can basically set every quality as there are (probably) released in all of those quality's. diff --git a/Remaining-settings-explained.md b/Remaining-settings-explained.md index 6558075..f682b5e 100644 --- a/Remaining-settings-explained.md +++ b/Remaining-settings-explained.md @@ -1,7 +1,7 @@ --- -[ [Shows] ](https://github.com/SickChill/SickChill/wiki/Remaining-settings-explained#shows) [ [Schedule] ](https://github.com/SickChill/SickChill/wiki/Remaining-settings-explained#schedule) [ [History] ](https://github.com/SickChill/SickChill/wiki/Remaining-settings-explained#history) -[ [The Manage menu] ](https://github.com/SickChill/SickChill/wiki/Remaining-settings-explained#the-manage-menu) [ [Mass Update] ](https://github.com/SickChill/SickChill/wiki/Remaining-settings-explained#mass-update) [ [Backlog overview] ](https://github.com/SickChill/SickChill/wiki/Remaining-settings-explained#backlog-overview) [ [Manage Searches] ](https://github.com/SickChill/SickChill/wiki/Remaining-settings-explained#manage-searches) [ [Episodes Status Management] ](https://github.com/SickChill/SickChill/wiki/Remaining-settings-explained#episodes-status-management) [ [Failed Downloads] ](https://github.com/SickChill/SickChill/wiki/Remaining-settings-explained#failed-downloads) [ [Missed Subtitle Management] ](https://github.com/SickChill/SickChill/wiki/Remaining-settings-explained#missed-subtitle-management) [ [Logs & Errors Menu] ](https://github.com/SickChill/SickChill/wiki/Remaining-settings-explained#logs--errors-menu) [ [Options (wrench and screwdriver)] ](https://github.com/SickChill/SickChill/wiki/Remaining-settings-explained#options-wrench-and-screwdriver) +[ [Shows] ](#shows) [ [Schedule] ](#schedule) [ [History] ](#history) +[ [The Manage menu] ](#the-manage-menu) [ [Mass Update] ](#mass-update) [ [Backlog overview] ](#backlog-overview) [ [Manage Searches] ](#manage-searches) [ [Episodes Status Management] ](#episodes-status-management) [ [Failed Downloads] ](#failed-downloads) [ [Missed Subtitle Management] ](#missed-subtitle-management) [ [Logs & Errors Menu] ](#logs--errors-menu) [ [Options (wrench and screwdriver)] ](#options-wrench-and-screwdriver) --- @@ -98,8 +98,8 @@ This Pull down menu gives you various Manage options to maintain your shows. ![mass-update-1](images/mass-update-1.png) -The screens shows you an overview of your shows and what settings they use/have set. -Here you can mainly start processes concerning your shows, like removing or starting a subtitle search. : +The screen shows you an overview of your shows and what settings they use/have set. +Here you can mainly start processes concerning your shows, like removing or starting a subtitle search : `update` Forces a full update of your shows data from the indexer. Replaces the old data in the database. Can be helpful in case you have problems with air dates, metadata etc. @@ -117,7 +117,7 @@ Removes the show from SickChill. Leaves all files and folders intact. ![mass-update-2](images/mass-update-2.png) To modify the settings of the show itself you have to select the show(s) and push the edit button. -Now you have the opportunity to set the following settings for all selected shows. : +Now you have the opportunity to set the following settings for all selected shows : `Quality` @@ -140,7 +140,7 @@ Enable/disable Air by date for the shows. `subtitles` Enable/disable subtitles for the shows. -For more details on the functions them self see the [show settings explanation](https://github.com/SickChill/SickChill/wiki/Show-settings-explained). +For more details on the functions them self see the [show settings explanation](Show-settings-explained.md). ## Backlog overview diff --git a/Settings-explained.md b/Settings-explained.md index 7dd0616..0212a83 100644 --- a/Settings-explained.md +++ b/Settings-explained.md @@ -60,7 +60,7 @@ Key resource links should you wish to chat or fix something that's gone wrong. You can manually set a time at witch SickChill updates/refreshes the shows information from the indexers. (air dates etc.) Best to use a time at night when the device is idle. - `Send to trash for actions:` This option lets SickChill move the files to a recycle bin instead of the normal permanent delete. - Note: doesn't work on all Operating Systems. [(NSSM / WinService workaround)](![img.png](img.png)![img_1.png](img_1.png)https://github.com/SickChill/SickChill/wiki/FAQ's-and-Fixes#why-does-send-to-trash-option-not-send-the-files-to-the-recycle-bin) + Note: doesn't work on all Operating Systems. [(NSSM / WinService workaround)](FAQ's-and-Fixes.md#why-does-send-to-trash-option-not-send-the-files-to-the-recycle-bin) - `Number of Log files saved:` Lets you set he number of log files that are stored before deleted. - `Size of Log files saved:` @@ -119,7 +119,7 @@ Key resource links should you wish to chat or fix something that's gone wrong. - `Timezone:` Lets you set the timezone. Display dates and times in either your timezone or the shows network timezone - `Download url:` - [See here](https://github.com/SickChill/SickChill/wiki/How-to-use-Download-url) + [See here](How-to-use-Download-url.md) #### Web Interface @@ -388,7 +388,7 @@ This sections allows you to enable/disable the providers you want to use and dra ## Post Processing -- In this section you can use post process options that SickChill should preform after an episode is downloaded. For example renaming of the file etc. More information can also be found under [Post Processing](https://github.com/SickChill/SickChill/wiki/Post-Processing) +- In this section you can use post process options that SickChill should preform after an episode is downloaded. For example renaming of the file etc. More information can also be found under [Post Processing](Post-Processing.md) ![postprocessing-1](images/PostProcMain.png) @@ -436,7 +436,7 @@ This sections allows you to enable/disable the providers you want to use and dra - `Use icacls:` Sets video file permissions after using the move method in post processing. _Windows only_. - `Extra Scripts:` - SickChill gives you the opportunity to run your own scripts for post-processing. See [post processing](https://github.com/SickChill/SickChill/wiki/Post-Processing) for more information. + SickChill gives you the opportunity to run your own scripts for post-processing. See [post processing](Post-Processing.md) for more information. #### Episode Naming diff --git a/Settings-jackett.md b/Settings-jackett.md index 48d4b01..51c4812 100644 --- a/Settings-jackett.md +++ b/Settings-jackett.md @@ -25,7 +25,7 @@ 9. Set the **black hole folder location** to your directory where your torrent client downloads to. **Note** : This directory setting is not necessary for Jackett to work as long as SickChill is configured to communicate to your download client (qbittorrent, etc), but previous tutorials suggested setting this directory. ![Jacket09](images/Jacket09.png) Make sure to click **Save Changes**! - **IMPORTANT** : It is assumed your SickChill application is already configured to communicate with your download client such as qbittorent, utorrent, deluge, etc.) If you haven't done so, please visit [Settings-explained](https://github.com/SickChill/sickchill/wiki/Settings-explained) and scroll down to the section on Torrent Search. + **IMPORTANT** : It is assumed your SickChill application is already configured to communicate with your download client such as qbittorent, utorrent, deluge, etc.) If you haven't done so, please visit [Settings-explained](Settings-explained.md) and scroll down to the section on Torrent Search. 10. Now click on the **Search Providers** pill link on the navigation bar of SickChill and go to the (newly added if NZB wasn't previously enabled in SC) **Configure Custom Newsnab Provider** and click the drop-down to **- - add new provider - -** 11. Set the provider name as **Jackett**. 12. Go back to Jackett and copy the **Torznab Feed** url. **IMPORTANT** : If you copy from Jackett, we need to replace a part of the URL path with the "all" keyword instead of the tracker specific name you copied from. This ensures this one provider in SC will search ALL your providers in Jackett. Refer to the image below. diff --git a/Show-settings-explained.md b/Show-settings-explained.md index 8356a32..5edf62c 100644 --- a/Show-settings-explained.md +++ b/Show-settings-explained.md @@ -41,9 +41,9 @@ Here you have the possibility to customize the shows settings. - `Anime` Is this an Anime show and should SickChill use Anime functions.? - `Scene Numbering` - Should SickChill use [Scene Numbering](https://github.com/SickChill/SickChill/wiki/Scene-exceptions-and-numbering#what-is-scene-numbering).? + Should SickChill use [Scene Numbering](Scene-exceptions-and-numbering.md#what-is-scene-numbering).? - `Preferred quality of episodes to be downloaded` - What [quality](https://github.com/SickChill/SickChill/wiki/Quality-Settings) should SickChill use.? + What [quality](Quality-Settings.md) should SickChill use.? - `Save Defaults` This allows the settings you have selected to be saved as defaults, So you don't have to manually select them next time adding a show. Now that you have set up all settings press the `add` button. @@ -84,9 +84,9 @@ Just as adding a new show you can set custom settings for the show(s). If you li - `Anime` Is this an Anime show and should SickChill use Anime functions.? - `Scene Numbering` - Should SickChill use [Scene Numbering](https://github.com/SickChill/SickChill/wiki/Scene-exceptions-and-numbering#what-is-scene-numbering).? + Should SickChill use [Scene Numbering](Scene-exceptions-and-numbering.md#what-is-scene-numbering).? - `Preferred quality of episodes to be downloaded` - What [quality](https://github.com/SickChill/SickChill/wiki/Quality-Settings) should SickChill use.? + What [quality](Quality-Settings.md) should SickChill use.? - `Save Defaults` This allows the settings you have selected to be saved as defaults, So you don't have to manually select them next time adding a show. Now that you have set up all settings press the `add` button. @@ -149,9 +149,9 @@ This lets you customize the columns of the seasons. You can add the size columns - `Show Location:` Lets you set the location of the shows folder. - `Preferred Quality:` - Lets you set the quality of the file that SickChill should download. See [Quality Settings](https://github.com/SickChill/SickChill/wiki/Quality-Settings) for more info. + Lets you set the quality of the file that SickChill should download. See [Quality Settings](Quality-Settings.md) for more info. - `Default Episode Status:` - Lets you set the Default Episode Status. Needs to be set to WANTED if you want new shows to be downloaded.! See [Default Episode Status](https://github.com/SickChill/SickChill/wiki/FAQ%27s-and-Fixes#newly-aired-shows-are-not-downloading-and-set-to-skippedignored) for more info. + Lets you set the Default Episode Status. Needs to be set to WANTED if you want new shows to be downloaded.! See [Default Episode Status](FAQ%27s-and-Fixes.md#newly-aired-shows-are-not-downloading-and-set-to-skippedignored) for more info. - `Info Language:` Lets you set the default language for the show. Info, descriptions etc. Note, not subtitles.! - `Subtitles:` Enable or disable the automatic download of subtitles for this show. @@ -166,7 +166,7 @@ This lets you customize the columns of the seasons. You can add the size columns - `Anime:` Select if the show only contains an episode number instead of the normal S01E01 format in the title. - `Sports:` Shows release with dates rather than other formats. - `Season folders:` Store episodes in season folders. Disable if you like all episodes in one folder. Note: _doesn't work with some systems._ -- `Scene Numbering:` Enable or disable Scene Numbering. See [Scene Numbering](https://github.com/SickChill/SickChill/wiki/Scene-exceptions-and-numbering#what-is-scene-numbering) for more info. +- `Scene Numbering:` Enable or disable Scene Numbering. See [Scene Numbering](Scene-exceptions-and-numbering.md#what-is-scene-numbering) for more info. - `DVD Order:` Presently _unavailable_ with theTVDB APIv3. ![Advanced](images/ShowAdvanced.png) @@ -180,7 +180,7 @@ This lets you customize the columns of the seasons. You can add the size columns - `Required Words:` All releases NOT containing those words will be skipped.! Use with caution.! Separate words with a comma, e.g. "word1,word2,word3" - `Scene Exception:` - Lets you set and remove Scene Exceptions. See [Scene exceptions and numbering](https://github.com/SickChill/SickChill/wiki/Scene-exceptions-and-numbering) for more info. + Lets you set and remove Scene Exceptions. See [Scene exceptions and numbering](Scene-exceptions-and-numbering.md) for more info. ![Customize](images/ShowCustomize.png) diff --git a/SickChill-Windows-Installer.md b/SickChill-Windows-Installer.md index ec937b3..73e646e 100644 --- a/SickChill-Windows-Installer.md +++ b/SickChill-Windows-Installer.md @@ -20,7 +20,7 @@ sc config "SickChill" obj= "username" password= "password" sc restart SickChill ``` -If you are unable to get those setup correctly, you can always disable the service and start SickChill manually. SickChill will then run as the user that is logged in to Windows. Alternatively, you can also install SickChill [manually](https://github.com/SickChill/SickChill/wiki/SickChill-Windows-Installer#manual-installation-guides-for-windows) +If you are unable to get those setup correctly, you can always disable the service and start SickChill manually. SickChill will then run as the user that is logged in to Windows. Alternatively, you can also install SickChill [manually](SickChill-Windows-Installer.md#manual-installation-guides-for-windows) ### Enable Linked Connections diff --git a/SickChill-installation-packages.md b/SickChill-installation-packages.md index 1897b96..ac74078 100644 --- a/SickChill-installation-packages.md +++ b/SickChill-installation-packages.md @@ -4,12 +4,12 @@ For many Devices there are installation packages compiled by community members. --- -- [Docker](https://github.com/SickChill/SickChill/wiki/Docker) -- [Pip](https://github.com/SickChill/SickChill/wiki/Pip) +- [Docker](Docker.md) +- [Pip](Pip.md) - [Windows](https://github.com/SickChill/SickChillInstaller/releases/latest) -- [Freenas](https://github.com/SickChill/SickChill/wiki/Freenas) -- [ReadyNAS](https://github.com/SickChill/SickChill/wiki/ReadyNAS) -- [Synology](https://github.com/SickChill/SickChill/wiki/Synology) +- [Freenas](Freenas.md) +- [ReadyNAS](ReadyNAS.md) +- [Synology](Synology.md) - [QNAP](https://github.com/OneCDOnly/sherpa) --- diff --git a/Synology-install.md b/Synology-install.md index 3397acd..871daba 100644 --- a/Synology-install.md +++ b/Synology-install.md @@ -2,20 +2,20 @@ Luckily this is very easy and can be preformed with a few simple steps. -Summery. : +Summary: 1. Go into SickChill and make a backup. 2. Go to the Synology Package Center and remove the old package SickChill. 3. Then install latest SickChill package from [SynoCommunity](https://synocommunity.com/). 4. Restore your backup, and restart SickChill. -That's it. :+1: +That's it :+1: Note: By default the Synocommunity SickChill package uses port 8081, and prior Synocommunity packages used port 8083 or 8899. So if you restore your backup between the two the port will also be restored back. Therefor make sure you open the SickChill page with the correct port. Once running change to 8081 to align with package center link. ###### Need more Synology SickChill info -See the [Synology](https://github.com/SickChill/SickChill/wiki/Synology) set up guide for troubleshooting and other fun DSM information. +See the [Synology](Synology.md) set up guide for troubleshooting and other fun DSM information. --- diff --git a/What-is-SickChill.md b/What-is-SickChill.md index d656749..0754aff 100644 --- a/What-is-SickChill.md +++ b/What-is-SickChill.md @@ -5,7 +5,7 @@ And that is all fully automated! Just set it up and as soon as there is a new ep #### How does this all work? -When you add a show to SickChill the data (like air-dates, episode name/number) are pulled from an indexer like [TheTVDb](http://thetvdb.com/). At that point, SickChill knows when a new episode is going to air and starts the search on your favorite Torrent and/or NZB site. For this search you can set [quality](https://github.com/SickChill/SickChill/wiki/Quality-Settings) settings. For example: HDTV or SD quality. SickChill will go over all the results to find the [quality](https://github.com/SickChill/SickChill/wiki/Quality-Settings) YOU want and when found snatches the torrent/nzb and sends it to your download client. (sabnzb, utorrent, transmission etc.) At this point, SickChill starts monitoring your client's download folder to see if the file is finished downloading. When this is the case SickChill starts the post-processing. Here you can tell SickChill to move the file to your shows folder, or also rename it, or send notifications to Plex/Kodi or to your smart-phone. The list is long for what you can do with post-processing, simply set the actions you prefer. +When you add a show to SickChill the data (like air-dates, episode name/number) are pulled from an indexer like [TheTVDb](http://thetvdb.com/). At that point, SickChill knows when a new episode is going to air and starts the search on your favorite Torrent and/or NZB site. For this search you can set [quality](Quality-Settings.md) settings. For example: HDTV or SD quality. SickChill will go over all the results to find the [quality](Quality-Settings.md) YOU want and when found snatches the torrent/nzb and sends it to your download client. (sabnzb, utorrent, transmission etc.) At this point, SickChill starts monitoring your client's download folder to see if the file is finished downloading. When this is the case SickChill starts the post-processing. Here you can tell SickChill to move the file to your shows folder, or also rename it, or send notifications to Plex/Kodi or to your smart-phone. The list is long for what you can do with post-processing, simply set the actions you prefer. And this whole process is completely automated. So once you set it up no user intervention is required. This makes SickChill ideal for NAS devices. But can run on almost every other device. diff --git a/_Sidebar.md b/_Sidebar.md index bbbd7d3..0e594c2 100644 --- a/_Sidebar.md +++ b/_Sidebar.md @@ -1,20 +1,20 @@ **Main**
[Wiki Home](https://github.com/SickChill/SickChill/wiki) -[What is SickChill?](https://github.com/SickChill/SickChill/wiki/What-is-SickChill) -[Installation/Setup Guides](https://github.com/SickChill/SickChill/wiki/Installation-&-Configuration-Guides) -[Donations and support](https://github.com/SickChill/SickChill/wiki/Donations) -[Installation packages](https://github.com/SickChill/SickChill/wiki/SickChill-installation-packages) -[Developers](https://github.com/SickChill/SickChill/wiki/Developers) +[What is SickChill?](What-is-SickChill.md) +[Installation/Setup Guides](Installation-&-Configuration-Guides.md) +[Donations and support](Donations.md) +[Installation packages](SickChill-installation-packages.md) +[Developers](Developers.md) **Debugging**
-[FAQ's and Fixes](https://github.com/SickChill/SickChill/wiki/FAQ%27s-and-Fixes) -[Scene exceptions](https://github.com/SickChill/SickChill/wiki/Scene-exceptions-and-numbering) +[FAQ's and Fixes](FAQ%27s-and-Fixes.md) +[Scene exceptions](Scene-exceptions-and-numbering.md) **Settings**
-[Main settings explained](https://github.com/SickChill/SickChill/wiki/Settings-explained) -[Show settings explained](https://github.com/SickChill/SickChill/wiki/Show-settings-explained) -[Remaining settings explained](https://github.com/SickChill/SickChill/wiki/Remaining-settings-explained) -[NZBtoMedia](https://github.com/SickChill/SickChill/wiki/NZBtoMedia) -[MetaData](https://github.com/SickChill/SickChill/wiki/MetaData) -[Post-Processing](https://github.com/SickChill/SickChill/wiki/Post-Processing) -[Quality Settings](https://github.com/SickChill/SickChill/wiki/Quality-Settings) +[Main settings explained](Settings-explained.md) +[Show settings explained](Show-settings-explained.md) +[Remaining settings explained](Remaining-settings-explained.md) +[NZBtoMedia](NZBtoMedia.md) +[MetaData](MetaData.md) +[Post-Processing](Post-Processing.md) +[Quality Settings](Quality-Settings.md)