diff --git a/drivers/SmartThings/zigbee-button/fingerprints.yml b/drivers/SmartThings/zigbee-button/fingerprints.yml
index 2e7b3fbe57..2efe748b62 100644
--- a/drivers/SmartThings/zigbee-button/fingerprints.yml
+++ b/drivers/SmartThings/zigbee-button/fingerprints.yml
@@ -184,6 +184,12 @@ zigbeeManufacturer:
     manufacturer: Samsung Electronics
     model: SAMSUNG-ITM-Z-005
     deviceProfileName: SLED-three-buttons  
+  - id: "Linxura Smart Controller"
+    deviceLabel: Linxura Smart Controller
+    manufacturer: Linxura
+    model: Smart Controller
+    deviceProfileName: four-buttons
+    isJoinable: true
   # Wall Hero
   - id: "WALL HERO/ACL-401SCA4"
     deviceLabel: WallHero Remote Control (4-Inch)
diff --git a/drivers/SmartThings/zigbee-button/src/zigbee-multi-button/init.lua b/drivers/SmartThings/zigbee-button/src/zigbee-multi-button/init.lua
index f572fd79e4..99c2e3a9ec 100644
--- a/drivers/SmartThings/zigbee-button/src/zigbee-multi-button/init.lua
+++ b/drivers/SmartThings/zigbee-button/src/zigbee-multi-button/init.lua
@@ -41,7 +41,8 @@ local ZIGBEE_MULTI_BUTTON_FINGERPRINTS = {
   { mfr = "ROBB smarrt", model = "ROB_200-007-0" },
   { mfr = "ROBB smarrt", model = "ROB_200-008-0" },
   { mfr = "WALL HERO", model = "ACL-401SCA4" },
-  { mfr = "Samsung Electronics", model = "SAMSUNG-ITM-Z-005" }
+  { mfr = "Samsung Electronics", model = "SAMSUNG-ITM-Z-005" },
+  { mfr = "Linxura", model = "Smart Controller" }
 }
 
 local function can_handle_zigbee_multi_button(opts, driver, device, ...)
@@ -88,7 +89,8 @@ local zigbee_multi_button = {
     require("zigbee-multi-button.shinasystems"),
     require("zigbee-multi-button.robb"),
     require("zigbee-multi-button.wallhero"),
-    require("zigbee-multi-button.SLED")
+    require("zigbee-multi-button.SLED"),
+    require("zigbee-multi-button.linxura")
   }
 }
 
diff --git a/drivers/SmartThings/zigbee-button/src/zigbee-multi-button/linxura/init.lua b/drivers/SmartThings/zigbee-button/src/zigbee-multi-button/linxura/init.lua
new file mode 100644
index 0000000000..2d1bd35ec2
--- /dev/null
+++ b/drivers/SmartThings/zigbee-button/src/zigbee-multi-button/linxura/init.lua
@@ -0,0 +1,132 @@
+-- Copyright 2022 SmartThings
+--
+-- Licensed under the Apache License, Version 2.0 (the "License");
+-- you may not use this file except in compliance with the License.
+-- You may obtain a copy of the License at
+--
+--     http://www.apache.org/licenses/LICENSE-2.0
+--
+-- Unless required by applicable law or agreed to in writing, software
+-- distributed under the License is distributed on an "AS IS" BASIS,
+-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+-- See the License for the specific language governing permissions and
+-- limitations under the License.
+
+local capabilities = require "st.capabilities"
+local IASZone = (require "st.zigbee.zcl.clusters").IASZone
+local constants = require "st.zigbee.constants"
+local clusters = require "st.zigbee.zcl.clusters"
+local Groups = clusters.Groups
+local log = require "log"
+local device_management = require "st.zigbee.device_management"
+local zcl_commands = require "st.zigbee.zcl.global_commands"
+local zcl_clusters = require "st.zigbee.zcl.clusters"
+
+local BUTTON1_HELD = 0x0001
+local BUTTON1_PUSHED = 0x0003
+local BUTTON1_DOUBLE = 0x0005
+local BUTTON2_HELD = 0x0007
+local BUTTON2_PUSHED = 0x0009
+local BUTTON2_DOUBLE = 0x000B
+local BUTTON3_HELD = 0x000D
+local BUTTON3_PUSHED = 0x000F
+local BUTTON3_DOUBLE = 0x0011
+local BUTTON4_HELD = 0x00013
+local BUTTON4_PUSHED = 0x00015
+local BUTTON4_DOUBLE = 0x0017
+
+local BUTTON1 = "button1"
+local BUTTON2 = "button2"
+local BUTTON3 = "button3"
+local BUTTON4 = "button4"
+
+
+local LINXURA_BUTTON_FINGERPRINTS = {
+    { mfr = "Linxura", model = "Smart Controller" }
+}
+
+local configuration = {
+    {
+        cluster = IASZone.ID,
+        attribute = IASZone.attributes.ZoneStatus.ID,
+        minimum_interval = 0,
+        maximum_interval = 3600,
+        data_type = IASZone.attributes.ZoneStatus.base_type,
+        reportable_change = 1
+    }
+}
+local is_linxura_button = function(opts, driver, device)
+    for _, fingerprint in ipairs(LINXURA_BUTTON_FINGERPRINTS) do
+        if device:get_manufacturer() == fingerprint.mfr and device:get_model() == fingerprint.model then
+        return true
+        end
+    end
+    return false
+end
+
+local function present_value_attr_handler(driver, device, zone_status, zb_rx)   
+    log.info("present_value_attr_handler The current value is: ", zone_status.value)
+    local status = zone_status
+    
+
+    local additional_fields = {
+        state_change = true
+    }
+    local event
+    local mod = status.value % 6
+    if mod == 1 then
+        event = capabilities.button.button.pushed(additional_fields)
+    elseif mod == 3 then
+        event = capabilities.button.button.double(additional_fields)
+    elseif mod == 5 then
+        event = capabilities.button.button.held(additional_fields)
+    else
+        return false
+    end
+
+    if status.value == BUTTON1_HELD or status.value == BUTTON1_PUSHED or status.value == BUTTON1_DOUBLE then
+        device:emit_component_event(device.profile.components[BUTTON1], event)
+        --device:emit_event(device.profile.components[BUTTON1],event)
+        device:emit_event(event)
+    elseif status.value == BUTTON2_HELD or status.value == BUTTON2_PUSHED or status.value == BUTTON2_DOUBLE then
+        device:emit_component_event(device.profile.components[BUTTON2], event)
+        device:emit_event(event)
+    elseif status.value == BUTTON3_HELD or status.value == BUTTON3_PUSHED or status.value == BUTTON3_DOUBLE then
+        device:emit_component_event(device.profile.components[BUTTON3], event)
+        device:emit_event(event)
+    elseif status.value == BUTTON4_HELD or status.value == BUTTON4_PUSHED or status.value == BUTTON4_DOUBLE then
+        device:emit_component_event(device.profile.components[BUTTON4], event)
+        device:emit_event(event)
+    end
+end
+
+
+local function device_init(driver, device)
+    for _, attribute in ipairs(configuration) do
+      device:add_configured_attribute(attribute)
+
+
+      device:add_monitored_attribute(attribute)
+    end
+  end
+  
+
+
+local linxura_device_handler = {
+    NAME = "Linxura Device Handler",
+    lifecycle_handlers = {
+        init = device_init,
+    },
+     
+    zigbee_handlers = {
+    attr = {
+        [IASZone.ID] = {
+        [IASZone.attributes.ZoneStatus.ID] = present_value_attr_handler
+        }
+    },
+    },
+    
+    can_handle = is_linxura_button,
+}
+
+return linxura_device_handler
\ No newline at end of file
diff --git a/drivers/SmartThings/zigbee-button/src/zigbee-multi-button/supported_values.lua b/drivers/SmartThings/zigbee-button/src/zigbee-multi-button/supported_values.lua
index fabaa7da6f..fc6fde8f72 100644
--- a/drivers/SmartThings/zigbee-button/src/zigbee-multi-button/supported_values.lua
+++ b/drivers/SmartThings/zigbee-button/src/zigbee-multi-button/supported_values.lua
@@ -111,7 +111,8 @@ local devices = {
   },
   BUTTON_PUSH_HELD_DOUBLE_4 = {
     MATCHING_MATRIX = {
-      { mfr = "ShinaSystem", model = "MSM-300Z" }
+      { mfr = "ShinaSystem", model = "MSM-300Z" },
+      { mfr = "Linxura", model = "Smart Controller" }
     },
     SUPPORTED_BUTTON_VALUES = { "pushed", "held", "double" },
     NUMBER_OF_BUTTONS = 4