[BUG] Genus unsynthesizable error on rising/falling edge interrupt field

[BertVerrycken]

• I have reviewed this project's contribution guidelines

Describe the bug

When defining a field inside an interrupt status register as a negedge intr, the peakrdl generated always_ff code creates
a non-blocking assignment outside the clocked if then else. The same issue is also observed for posedge intr fields.

Peakrdl version: 1.1.0
Python version: 3.11.5
OS: RedHat 8.9
Genus error: CDFG-364: unsynthesizable process

RDL file:

reg stat_irq_reg_t {
  name="irq_stat_reg";

  default hw=w;  // HW can Set int only
  default sw=rw; // SW can clear
  default woclr; // Clear is via writing a 1

    field {     name="empty";
                desc="Fifo empty";
                negedge intr;
          } empty[0:0] = 1'b1;
};

addrmap test_reg{
    name = "test_addrmap";
             stat_irq_reg_t             irq_status_0;  // IRQ status and clear
};

command: peakrdl regblock test1.rdl -o test1

Peakrdl generated code in test_reg.sv in dir test1:

    always_ff @(posedge clk) begin
        if(rst) begin
            field_storage.irq_status_0.empty.value <= 1'h1;
        end else if(field_combo.irq_status_0.empty.load_next) begin
            field_storage.irq_status_0.empty.value <= field_combo.irq_status_0.empty.next;
        end
        field_storage.irq_status_0.empty.next_q <= hwif_in.irq_status_0.empty.next;
    end

The next_q assignment is outside the if rst else clock statement. The simulation tool does
not complain about it, but the synthesis tool does. Even if it is legal verilog, the best way
to implement this, is to have next_q assigned a reset value and do the assignment in
the end else (clocked) part. Like this (I have not verified the behaviour, just to look at
correcting the statement and bring it in the if else to make it synthesizable):

    always_ff @(posedge clk) begin
        if(rst) begin
            field_storage.irq_status_0.empty.value <= 1'h1;
            field_storage.irq_status_0.empty.next_q <= 1'h1;
        end
        else begin
           field_storage.irq_status_0.empty.next_q <= hwif_in.irq_status_0.empty.next;
           if(field_combo.irq_status_0.empty.load_next) begin
              field_storage.irq_status_0.empty.value <= field_combo.irq_status_0.empty.next;
          end
      end
    end

Expected behavior

I expect the falling/rising edge extra flop (next_q) to have a reset value and to be assigned in the clocked part.