Mechaduino02.gpi

Generated by EAGLE CAM Processor 7.7.0

Photoplotter Info File: C:/Users/jcchurch/Documents/GitHub/Mechaduino-Hardware/Mechaduino02.gpi

 Date              : 2/3/2017 4:46 PM
 Plotfile          : C:/Users/jcchurch/Documents/GitHub/Mechaduino-Hardware/Mechaduino02.GBL
 Apertures         : generated: 
 Device            : Gerber RS-274-X photoplotter, coordinate format 2.5 inch

Parameter settings:

 Emulate Apertures : no
 Tolerance Draw  + :  0.00 %
 Tolerance Draw  - :  0.00 %
 Tolerance Flash + :  0.00 %
 Tolerance Flash - :  0.00 %
 Rotate            : no
 Mirror            : no
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch

Plotfile Info:

 Coordinate Format : 2.5
 Coordinate Units  : Inch
 Data Mode         : Absolute
 Zero Suppression  : None
 End Of Block      : *

Apertures used:

 Code     Shape     Size                  used


  4
 D157     rectangle 0.0413inch x 0.0236inch     5
 D158     rectangle 0.0335inch x 0.0472inch     2
 D159     draw      0.0080inch            3799
 D160     draw      0.0100inch             405
 D161     round     0.0240inch              90
 D162     draw      0.0160inch              78
 D163     draw      0.0060inch               1
 D164     draw      0.0120inch               2
 D165     round     0.0356inch               7
 D166     draw      0.0320inch              22
 D167     square    0.0356inch               9
 D168     draw      0.0480inch               9
 D169     draw      0.0240inch               8