Cannot run the simulation

[lebronze]

i tried to run the simulation on OMNET++ ODE and got some errors.

Simulation terminated with exit code: -1073741819
Working directory:
Command line: multiUAV-simulation_dbg.exe -r 0 -m -u Qtenv -c Szenario_Hotel_Gabelbach omnetpp.ini

i can't find where is wrong

[Marconi666]

the same problem with me .
I don't know how to resolve it.

[9a54ks514w]

Did either of you resolve the problem? thx~

[ThomDietrich]

Hello guys,
I recognize the error but don't remember the reason/solution.

1. Please check if you are able to execute the osgearth example project
2. Check you've selected a valid configuration (e.g. Szenario_Hotel_Gabelbach)
3. Please describe when the error is shown. Right when you run the code, when the simulation is loaded in the 3D view, or when you start the simulation?

Best!

[9a54ks514w]

Hello ThomDietrich,
Which system can run this simulation, either Windows, or Linux, or both?
I followed these steps to install the simulation:

1. Install OMNeT++
2. Put "boost" into the "include-boost" of the OMNeT++ base directory
3. Build All in the OMNeT++ IDE
4. Run simulation config in the OMNeT++ IDE. However, it always terminated with exit code: -1073741819 in Windows, and 134 in Linux
   Which step did I make the mistake on?

Thanks!

[ThomDietrich]

@9a54ks514w you did not give any further details. Please describe as good as you can.

I've been using Windows and your boost addition sounds correct.

[yuan158588]

Hello,
I also have the same problem.I build the project and no problem,but i meet problems
when i run multiUAV-simulation debug.launch .thanks!

Besides,I can run the osg-earth example project.Although it's consloe "[osgEarth]* [Horizon] No horizon info installed in callback",the project can run successfully.

---

problem 1:
[osgEarth]* [EarthSerializer2] Layer "readymap_elevation" : Error : Failed to open a cache for layer because cache_only policy is in effect and bin [9c4fad04] could not be located.
problem 2:
Simulation terminated with exit code: -1073741819
Working directory: H:/multiUAV-simulation-master
Command line: multiUAV-simulation_dbg.exe -r 0 -m -u Qtenv -c Szenario_Hotel_Gabelbach omnetpp.ini
---
console log:
Starting...

$ cd H:/multiUAV-simulation-master
$ multiUAV-simulation_dbg.exe -r 0 -m -u Qtenv -c Szenario_Hotel_Gabelbach omnetpp.ini

OMNeT++ Discrete Event Simulation  (C) 1992-2018 Andras Varga, OpenSim Ltd.
Version: 5.4.1, build: 180629-5e28390, edition: Academic Public License -- NOT FOR COMMERCIAL USE
See the license for distribution terms and warranty disclaimer

Setting up Qtenv...

Loading NED files from .:  8

Loading images from 'D:\omnetpp-5.4.1\images': *: 0  abstract/*: 90  background/*: 4  block/*: 320  device/*: 195  logo/*: 1  maps/*: 9  misc/*: 70  msg/*: 55  old/*: 111  status/*: 28 

[osgEarth]  [TerrainLayer] Layer "readymap_elevation" Failed to create "tms" driver, but a cache may exist, so falling back on cache-only mode.
[osgEarth]* [EarthSerializer2] Layer "readymap_elevation" : Error : Failed to open a cache for layer because cache_only policy is in effect and bin [9c4fad04] could not be located.
Loading OSG Viewer library... 

setProcessorAffinity() : affinity.activeCPUs.size()=0, numprocessors=8
   Fallback setting CPU : 0
   Fallback setting CPU : 1
   Fallback setting CPU : 2
   Fallback setting CPU : 3
   Fallback setting CPU : 4
   Fallback setting CPU : 5
   Fallback setting CPU : 6
   Fallback setting CPU : 7
affinityMask = 255
setProcessorAffinity() : affinity.activeCPUs.size()=0, numprocessors=8
   Fallback setting CPU : 0
   Fallback setting CPU : 1
   Fallback setting CPU : 2
   Fallback setting CPU : 3
   Fallback setting CPU : 4
   Fallback setting CPU : 5
   Fallback setting CPU : 6
   Fallback setting CPU : 7
affinityMask = 255

Simulation terminated with exit code: -1073741819
Working directory: H:/multiUAV-simulation-master
Command line: multiUAV-simulation_dbg.exe -r 0 -m -u Qtenv -c Szenario_Hotel_Gabelbach omnetpp.ini

Environment variables:
PATH=;D:\omnetpp-5.4.1\bin;D:\omnetpp-5.4.1\tools\win64\mingw64\bin;D:\omnetpp-5.4.1\tools\win64\usr\bin;;D:/omnetpp-5.4.1/ide/jre/bin/server;D:/omnetpp-5.4.1/ide/jre/bin;D:/omnetpp-5.4.1/ide/jre/lib/amd64;.;D:\omnetpp-5.4.1\bin;D:\omnetpp-5.4.1\tools\win64\mingw64\bin;D:\omnetpp-5.4.1\tools\win64\usr\local\bin;D:\omnetpp-5.4.1\tools\win64\usr\bin;D:\omnetpp-5.4.1\tools\win64\usr\bin;C:\Windows\System32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;D:\omnetpp-5.4.1\tools\win64\usr\bin\site_perl;D:\omnetpp-5.4.1\tools\win64\usr\bin\vendor_perl;D:\omnetpp-5.4.1\tools\win64\usr\bin\core_perl;D:\omnetpp-5.4.1;
OMNETPP_ROOT=D:/omnetpp-5.4.1/
OMNETPP_IMAGE_PATH=D:\omnetpp-5.4.1\images