Skip to content

Latest commit

 

History

History
39 lines (38 loc) · 1.55 KB

INSTALL.md

File metadata and controls

39 lines (38 loc) · 1.55 KB
Raw

Installation Guide using PlatformIO


1. Clone all files of the respository to your local working directory
2. Install the missing libraries
There are two possibilities - either using the Library Manager of PlatformIO or the command line tool:

1. Built-In Liabrary Manager

Press the PlatformIO HOME Button to enter the Home Screen and there the Libraries Button to add missing libraries.
Search and install the following libaries:
  • RadioHead
  • TinyGPSPlus
  • DHT sensor library for ESPx
  • Adafruit SSD1306
  • Adafruit GFX Library
  • Adafruit BusIO
  • Adafruit Unified Sensor
  • https://github.com/SQ9MDD/AXP202X_Library.git (AXP202X_Library)
  • OneWire
  • DallasTemperature
  • SparkFun u-blox Arduino Library
  • blanchon/ArduinoJson
  • arcao/Syslog

2. Command Line Tool

If you issue
~/.platformio/penv/bin/pio run
It should resolve all dependencies automaticaly, thanks to the definitions in the section "lib_deps =".
You could (but not need to) install the libraries by hand:
platformio lib install "<library name>“
Check that the platformio.ini is available as it holds the board type for PlatformIO.

Compile

  • GUI: After pressing the check mark the code will be compiled, after pressing the arrow it will be compiled and uploaded to a connected TTGO.
  • platformio-cli: ~/.platformio/penv/bin/pio run -e ttgo-t-beam-v1.0 -t upload --upload-port /dev/cu.SLAB_USBtoUART