Skip to content

Sourcing

Jump to bottom
chrishenze edited this page Dec 21, 2021 · 9 revisions

Bill of Materials (BOM)

Sourcing guide and bill of materials can be found in this Google Spreadsheet.

The BOM is still work in progress and and is not perfect, especially the fasteners are unfinished. Please check whether the entries make sense!

Printed Parts

Material Choice

The parts should be printed in ABS, as higher temperatures occur in the chamber and especially at the printhead. Esun ABS+ is recommended as it is easier to print than others.

Print Settings

  • Layer height: 0.2 mm
  • Perimeters: 3
  • Infill: 20 %

https://vzbot.org/ - VzBot 3D-printer community

Clone this wiki locally