Complete Clima.Pro kits can be purchased at the Wilderness Labs Store, or you can source the components yourself. The Clima.Pro BoM is listed below:
| Qty | Item | Cost/MSRP (approx.) |
|---|---|---|
| 1 | Shenzen Fine-Offset Electronics Weather Sensor Kit | $ 79.95 |
| 1 | Clima PCB (see below) | ~$ 25.00 |
| 1 | 3d Printed Enclosure and Pipe Mount (see below) | $ 3.00 |
| 1 | 18650 LiIon Battery | $ 5.00 |
| 8 | M3 Heat Inserts | $ 5.00 |
| 8 | M3x12 Hex Head Screws | $ 5.00 |
| 4 | M2x3 Heat-Set Inserts | $ 1.00 |
| 8 | M2x6 bolts (4 for lid, 4 for board) | $ 1.00 |
| 1 | 3.5 Watt, 6V Solar Panel | $ 30.00 |
| 1 | Solar Panel Bracket | $ 6.00 |
| 1 | U-Bolt With Mounting Plate, 1/4"-20 Thread Size, 1" Id | $ 2.00 |
| 1 | Antenna - 2dBi SMA Plug | $ 3.50 |
| 1 | SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable | $ 4.00 |
The enclosure can be 3D printed, but should be printed using PETG or some other UV-Resistant material. PLA will degrade quickly in the sun. Additionally, it should be a light color such as white to avoid passive solar radiation absorption which will interfere with the temperature and humidity readings. We use the Duramic 3D Silk White filament.
If you're printing the enclosure yourself, you'll also need a soldering iron and heat-set insert tips to install the heat-set inserts.
All of the enclosure files can be found in the /Industrial_Design folder.
The Clima.Pro PCB was created in EasyEDA, and the source files as well as component BoM can be found on OSHW Lab.