From 5a38c60d32ce031412d2908247a6be91154920ef Mon Sep 17 00:00:00 2001 From: Luna <84203950+Wolvinny@users.noreply.github.com> Date: Sun, 28 Apr 2024 21:31:13 +0200 Subject: [PATCH] Update README.md --- README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 785f3ef..089fe70 100644 --- a/README.md +++ b/README.md @@ -25,7 +25,7 @@ Note that this is just a project i made. I do not have much experience with c so - A USB cable, and a powerbank with a a low power mode, since the arduino doesnt consume that much current some powerbanks might not detect this and shut off. Some have a low power mode where the output will be always on. I used an Iniu B42 (the one with the paw on it). You can use one USB connection but i chose to separate the control circuit from the fan itself - 1 DS18B20 temperature sensor (3 wire version). If there is no board, you also will need a 4k7 resistor. - A reed switch and magnet (there are prebuilt reed switch shields) -- (optional) An OLED screen with i2c control (SDA / SCL pins), i used https://www.otronic.nl/nl/mini-oled-display-wit-096-inch-128x64-i2c.html +- (optional) An OLED screen with i2c control (SDA / SCL pins), i used [this one](https://www.otronic.nl/nl/mini-oled-display-wit-096-inch-128x64-i2c.html) - Arduino editor downloaded on your pc - Soldering skills and material - Wires to connect everything @@ -95,7 +95,7 @@ None of this has been tested exstensively, so i do not have any idea yet about h As for the position of the temperature sensor, i'd recommend to put it in the mouth but not directly in the breathing path. -### If you end up using my project, it would mean a lot if you could star it and [support me](https://kofi.wolvinny.dev). I spent a lot of time making this and optimising it for other people to read and use, even the smallest amount helps ne out, and i plan on making more fursuit-related projects in the future +### If you end up using my project, it would mean a lot if you could star it and [support me](https://kofi.wolvinny.dev). I spent a lot of time making this and optimising it for other people to read and use, even the smallest amount helps me out, and i plan on making more fursuit-related projects in the future If you have any questions or any problems, feel free to contact me at mail@wolvinny.dev