Skip to content

Latest commit

 

History

History
102 lines (61 loc) · 5.13 KB

README.md

File metadata and controls

102 lines (61 loc) · 5.13 KB
Raw

Motoman

Build Status: ROS buildfarm Build Status: Travis CI

license - apache 2.0 license - bsd 3 clause

support level: consortium / vendor

ROS-Industrial Motoman metapackage. See the ROS wiki page for more information.

The motoman_experimental repository contains additional packages.

Contents

Branch naming follows the ROS distribution they are compatible with. -devel branches may be unstable. Releases are made from the distribution branches (indigo, kinetic).

Older releases may be found in the Github mirror of the old ROS-Industrial subversion repository.

ROS Distro Support

Kinetic
Branch kinetic-devel
Status supported
Version version

ROS Buildfarm

Kinetic Source Kinetic Debian
motoman not released not released

Building

On newer (or older) versions of ROS

Building the packages on newer (or older) versions of ROS is in most cases possible and supported. For example: building the packages in this repository on Ubuntu Xenial/ROS Kinetic or Ubuntu Bionic/ROS Melodic systems is supported. This will require creating a Catkin workspace, cloning this repository, installing all required dependencies and finally building the workspace.

Catkin tools

It is recommended to use catkin_tools instead of the default catkin when building ROS workspaces. catkin_tools provides a number of benefits over regular catkin_make and will be used in the instructions below. All packages can be built using catkin_make however: use catkin_make in place of catkin build where appropriate.

Building the packages

The following instructions assume that a Catkin workspace has been created at $HOME/catkin_ws and that the source space is at $HOME/catkin_ws/src. Update paths appropriately if they are different on the build machine.

These instructions build the kinetic-devel branch on a ROS Kinetic system:

# change to the root of the Catkin workspace
$ cd $HOME/catkin_ws

# retrieve the latest development version of motoman. If you'd rather
# use the latest released version, replace 'kinetic-devel' with 'kinetic'
$ git clone -b kinetic-devel https://github.com/ros-industrial/motoman.git src/motoman

# check build dependencies. Note: this may install additional packages,
# depending on the software installed on the machine
$ rosdep update

# be sure to change 'kinetic' to whichever ROS release you are using
$ rosdep install --from-paths src/ --ignore-src --rosdistro kinetic

# build the workspace (using catkin_tools)
$ catkin build

Activating the workspace

Finally, activate the workspace to get access to the packages just built:

$ source $HOME/catkin_ws/devel/setup.bash

At this point all packages should be usable (ie: roslaunch should be able to auto-complete package names starting with motoman_..). In case the workspace contains additional packages (ie: not from this repository), those should also still be available.

Installation and usage

Refer to Working With ROS-Industrial Robot Support Packages for information on how to use the files provided by the robot support and MoveIt configuration packages. See also the other pages on the ROS wiki.

Refer to the tutorials for information on installation and configuration of the controller-specific software components.