STL Print for Vive Ultimate Trackers?

[TrademarkPoIicy]

No description provided.

[Z4urce]

Waiting for a donation of Vive Ultimate trackers so I can make an STL for them as well.

[TrademarkPoIicy]

I see where you are coming from needing the tracker to make sure the STL fits properly around the housing. If I had the extra money I would donate a set of trackers to you but I do not sadly. I would also like to state I am not good at CAD took one year in middle school but I can be relentless. So I have slowly started working on making housing for a haptic motor plus an easy way of connecting/disconnecting wires using screws and pogo pins combined with the ability to clip the plate that screws on a strap on the back of the tracker making there be pressure for the Pogo pins to pop into place. There is also a stl available on Vives website of the tracker. On another note, I'd like to thank you for the work that you have put in on the project and please keep up the great job. :3

[TrademarkPoIicy]

Well this took longer than I thought it would but here it is...

Vive_Ultimate_Tracker_Screw-On-Mount_Haptic-Pancake_ External-Wire-Crimping.zip

I'm gonna go watch anime now