This product can be available for purchase here.
This IC has a combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running powerful algorithms. The BNO080 Inertial Measurement Unit (IMU) produces accurate rotation vector headings, excellently suited for VR and other heading applications with a static rotation error of 2 degrees or less. It’s what we’ve been waiting for: all the sensor data is combined and drift corrected into meaningful, accurate IMU information.
Note: As with all of the Version 1.0 Zio Qwiic boards, this board has been produced with the I2C pull-ups disconnected by default. If there's a significant length of wire between this board and your MCU, you'll need to solder closed the solder jumpers (labeled SDA, 3v3 and SCL) to connect the pull-up resistors to VCC.
- Rotation Vector
- Dynamic Error: 3.5°
- Static Error: 2.0°
- Gaming Rotation Vector
- Dynamic Error: 2.5°
- Static Error: 1.5°
- Heading Drift: 0.5° / min
- Geomagnetic Rotation Vector
- Dynamic Rotation Error: 4.5°
- Static Rotation Error: 3.0°
- Gravity Angle Error: 1.5°
- Linear Acceleration Accuracy: 0.35m/s2
- Accelerometer Accuracy: 0.3m/s2
- Gyroscope Accuracy: 3.1° / sec
- Magnetometer Accuracy: 1.4µT
- IC: BNO080
- I2C address: 0x4A, 0x4B (Default: 0x4A)
- Dimension: 13.9x 36.2mm(with mounting tab), 13.9x24.7mm(without mounting tab).
- Weight: 1.2g
Zio is a new line of open sourced, compact, and grid layout boards, fully integrated for Arduino and Qwiic ecosystem. Designed ideally for wearables, robotics, small-space limitations or other on the go projects. Check out other awesome Zio products here.
All Zio products are released under the Creative Commons Attribution, Share-Alike License, and in accordance with the principles of the Open Source Hardware Association's OSHW Statement of Principles 1.0 and OSHW Definition 1.0.