Skip to content

Latest commit

 

History

History
110 lines (105 loc) · 5.79 KB

virtualenv-setup.md

File metadata and controls

110 lines (105 loc) · 5.79 KB
Raw

SLP: Python's virtualenv setup

Go up to the main SLP documents page (md)

Python has a virtualenv package, which allows one to keep the installed Python packages, as well as various Python versions, stored locally. This allows users to install the packages, and the Python version can differ from the system default.

EVERYBODY SHOULD BE ON PYTHON 3! We aren't using Python 2 any more.

The following are the steps to set up a Django app via virtualenv. This all works on the course server as a regular user.

  1. Create the virtualenv directory. Do this via virtualenv -p /usr/bin/python3 ~/venv-django-1.11.
    • The -p /usr/gbin/python3 is how you specify the Python version, and we are using Python 3.
    • This will create a /home/slp/user/venv-django-1.11 directory (where user is the user name).
    • It doesn't matter what your directory is named, as long as it's a reasonable name.
      • However, it should be in your home directory (the ~/ before the directory name did that), and it should NOT be in your repo.
      • And don't bother putting in the bugfix part of the version number in the directory (the .6 of Django version 1.11.6), since that is likely to change throughout the project.
  2. Install the packages that you need.
    • From a command prompt, run source ~/venv-django-1.10/bin/activate.
      • This command will set the environment variables so that package installs go into your virtual environment, rather than to the entire system (which your user can't do).
      • You will notice a difference in the prompt so that you can tell if you are in this environment.
      • You can run deactivate to exit this environment without logging out (or you can just log out).
    • Once you are in this environment, install your packages as you would normally: pip3 install foo, pip3 install Django==1.11.6, pip3 install -r requirements.txt, etc.
    • Note that you are using Python 2 (which you shouldn't be), you would use pip and not pip3.
  3. Install the Django package into your virtual environment!
    • The system one may change, and your app may not work properly with a changed Django version.
    • Once in the virtualenv environment (from the previous step), run pip3 install Django==1.11.6.
    • Unless you have a reason to do so otherwise, always install the latest Django version by explicitly stating the version number in the pip3 command.
    • The latest version can be found at https://www.djangoproject.com/.
    • If the web server logs give an error such as, "ImproperlyConfigured: Error loading MySQLdb module: this is MySQLdb version (1, 3, 12, 'final', 0), but _mysql is version (1, 3, 7, 'final', 1)." followed by, "Did you install mysqlclient or MySQL-python?", then you need to install an older version of mysqlclient -- in this example, 1.3.7. So try pip install mysqlclient==1.3.7.
  4. Get the virtualenv library directory name.
    • This will be needed in the next step.
    • If your directory created in step one was ~/venv-django-1.11, then your directory will be something like /home/slp/user/venv-django-1.11/lib/python3.5/site-packages.
    • Note that the user name, virtual environment directory name, and virtual environment directory will likely be different for you.
    • You'll need the full path name, not a shortcut (i.e., don't use ~, so ~/venv-django-1.11/lib/python3.5/site-packages is not valid).
    • We'll call this the "library path".
  5. De-register the old Django app from the web server.
    • Run wsgi-admin -list, and note the ID number (first line).
    • Run wsgi-admin -remove -id 123, where "123" is the ID number from above.
  6. Re-register the Django application.
    • There are a number of parameters that you need to supply:.
      • -register: because we are registering a file
      • -file mysite/mysite/wsgi.py: the wsgi.py file for your project; you can do a absolute path or a relative path, but it's value will change depending on your directory structure.
      • -root: this registers it as /user instead of /django/user. Only use this for the project sites, as we will only be looking at /django/user to grade the homeworks.
      • -path /home/slp/user/venv-django-1.11/lib/python3.5/site-packages: this is the library path from the previous step.
    • Thus, a full wsgi-admin command might be one of the following (the first one doesn't have -root, the second one does):
      • wsgi-admin -register -file mysite/mysite/wsgi.py -path /home/slp/user/venv-django-1.11/lib/python3.5/site-packages
      • wsgi-admin -register -file mysite/mysite/wsgi.py -root -path /home/slp/user/venv-django-1.11/lib/python3.5/site-packages
  7. Test the site at http://server/django/user or http://server/user, where "server" is the course server, and "user" is the user who registered the file.
    • If something does not work, there could be many reasons. Viewing the apache error log will help -- run view-apache2-log to see the error messages printed.
    • Note, however, that Django has an annoying habit of printing the error message only the first time it occurs after a reload or restart.
    • Thus, you may want to reload the web server (reload-apache2), reload the site in your browser, and then look at the apache2 log then.
    • If the apache log is giving problems about MySQL ("Did you install mysqlclient or MySQL-python?"), try uninstalling all MySQL packages, and seeing if the default on the system works.