Skip to content

Latest commit

 

History

History
422 lines (330 loc) · 18 KB

02-LOADING-TORCH-MODEL.md

File metadata and controls

422 lines (330 loc) · 18 KB
Raw

2. LOADING TORCH MODEL

In this chapter, we'll walk through the process of loading model weights stored in the "consolidated.00.pth" file.

2.1. Creating TorchModelReader

from src/model/loader.go

func LoadModelEx(modelDir string, includeTensors bool, includeVocab bool) (*Model, error) {
    model := &Model{}
    if includeTensors {
        modelFilePath := filepath.Join(modelDir, "consolidated.00.pth")
        torchModelReader, err := torch.NewTorchModelReader(modelFilePath)
        if err != nil {
            return nil, err
        }
        defer torchModelReader.Close()
        ...
    }
    ...
}

When we step into the function, we observe the creation of a common.MemoryMapper object for the reader. This allows us to set up mappings between virtual memory addresses and file locations on disk and enables us to represent and access them as []byte slices in the code.

The file "consolidated.00.pth" contains various weight tensors. We will determine file offsets corresponding to these tensors and create tensor objects by establishing memory mapping with these offset values.

See more: Memory Mapping.

from src/torch/torchmodelreader.go

func NewTorchModelReader(modelFilePath string) (*TorchModelReader, error) {
    memoryMapper, err := common.NewMemoryMapper(modelFilePath)
    if err != nil {
        return nil, err
    }

    result := &TorchModelReader{
        modelFilePath: modelFilePath,
        memoryMapper:  memoryMapper,
    }
    return result, nil
}

2.2. Calling TorchModelReader.Load()

TorchModelReader.Load(...) is called if includeTensors is true.

from src/model/loader.go

func LoadModelEx(modelDir string, includeTensors bool, includeVocab bool) (*Model, error) {
    if includeTensors {
        ...
        common.GLogger.ConsolePrintf("Loading model file: \"%s\"...", modelFilePath)
        modelTensors, err := torchModelReader.Load()
        if err != nil {
            return nil, err
        }
        model.Tensors = modelTensors
        common.GLogger.ConsolePrintf("Found %d tensors in the model.", len(model.Tensors.GetKeys()))
        ...
    }
    ...
}

2.2.1. Reading Model File as a ZIP File

The file "consolidated.00.pth" in the specified path is an uncompressed ZIP file containing 1 Pickle file and 291 files of weight tensors (valid for Llama 3.1 8B/8B-Instruct models). Utilizing uncompressed ZIP instead of compressed ZIP allows for direct content reading (a must for memory mapping) without the need for an unzipper stream wrapper. Additionally, utilizing a ZIP file allows the storage and transfer of multiple files as a single file.

If you are curious about what this file contains, you can simply change extension of this file to ".zip" and check out it as a ZIP file.

from src/torch/torchmodelreader.go

func (tmr *TorchModelReader) Load() (*pickle.PickleDict[*ml.Tensor], error) {
    var err error
    tmr.inputZipReader, err = zip.OpenReader(tmr.modelFilePath)
    if err != nil {
        return nil, err
    }
    ...
}

2.2.2. Searching for a .pkl File

If you check out the contents of the "consolidated.00.pth" file, you will find a structure like this:

consolidated (parent directory)
  |-byteorder
  |-version
  |-data.pkl
  |-data
  |  |-135
  |  |-61
  |  |-95
  |  |-132
  |  |-59
  |  |-92
  |  |-...

The name of .pkl file is not important for us (it is data.pkl), we look for exactlly one .pkl file in the ZIP file, and call tmr.readPickleFile function for this file.

from src/torch/torchmodelreader.go

    pklRegexp, _ := regexp.Compile(`\.pkl$`)
    pklFileList := tmr.findFilesInZip(pklRegexp)
    if len(pklFileList) != 1 {
        return nil, fmt.Errorf("no .pkl file found in Torch model file \"%s\"", tmr.modelFilePath)
    }
    modelTensorVals, err := tmr.readPickleFile(pklFileList[0])
    if err != nil {
        return nil, err
    }

2.2.3. Reading Pickle File - Reader Initialization

Pickle (.pkl) file is a specific file format of Python platform. Our project's Pickle reader was inspired by pickle.py in Python repository code. Historically, Pickle project was an open-source project, independent of Python repository. Then it was integrated into Python standard library. It aims to serialize/deserialize Python objects and dictionaries with data and methods. The simplicity of its usage and elasticity made it a superior and most-used library to achieve these types of tasks.

In the ML world, the Pickle library and its format have become a de facto standard. However, it comes with certain side effects, such as the risk of malicious code execution, because it allows calling functions during the serialization/deserialization process. Alternatives like Safetensors provide a more secure approach to accomplishing these tasks.

The original Llama model weight files were saved via Pytorch in Pickle format. You can find these weights in different file formats on the Internet, but we will continue with the original files distributed by Meta.

Torch model file reader functionality was separated into two packages: pickle and torch.

  • The pickle package contains functions and structures for reading a generic Pickle (.pkl) file. It's important to note that our ported version supports only a limited count of Pickle opcodes necessary for loading specific Llama model.
  • The torch package contains functions and structures specialized for Pytorch model files. The Pickle format comes with an elastic structure that allows us to extend it with customized functionalities. pickle package functions will call/use our customized functions/structures defined in torch if it reads an opcode that requires to do, in the file.

Our steps:

  • Found .pkl file in the ZIP stream is open as io.ReadCloser
  • A pickle.PickleReader is created
  • findClassTorch function is pointed as pickleReader.FindClassFn. This function will be used to instantiate supported classes and to point supported functions, referred in the Pickle file, via the defined TORCH_CLASSES map. Further, we will see how a Pickle file refers and lets us instantiate/point Go objects/functions.
  • persistentLoad function is pointed as pickleReader.PersistentLoadFn. This function will be used to point out a tensor file in the ZIP file as torch.TorchStorage and to do memory mapping to the specified file location/offset. Returned objects will be used while creating weight tensors.

from src/torch/torchmodelreader.go

func (tmr *TorchModelReader) readPickleFile(inputPickleFile *zip.File) (*pickle.PickleDict[interface{}], error) {
    fileReader, err := inputPickleFile.Open()
    if err != nil {
        return nil, err
    }
    defer fileReader.Close()
    tmr.dataBasePath = inputPickleFile.FileHeader.Name[:len(inputPickleFile.FileHeader.Name)-4]
    pickleReader := pickle.NewPickleReader(fileReader)
    pickleReader.FindClassFn = findClassTorch
    pickleReader.PersistentLoadFn = tmr.persistentLoad
    model, err := pickleReader.Load()
    if err != nil {
        return nil, err
    }
    return model, nil
}

2.2.4. Reading Pickle File - Reading Opcodes

Now, we are ready to read the bytes of the Pickle file.

2.2.4.1. Opcodes

Pickle uses a simple stack-based virtual machine that records the instructions used to reconstruct the object. The file is just a list of serialized opcodes, the first one being expected to be the protocol version and the last one a stop opcode. When the stop opcode is met, the current object on the stack is popped.

See: Wikipedia | Diving into the Python Pickle format

Pickle format consists of pairs of opcode and data bytes. Each pair starts with one byte that stands for an "opcode" and then continues with data bytes varying by each type of opcode.

Each supported Pickle "opcode" should be defined as a byte constant and have a corresponding dispatcher (reader) function in our dispatcher map.

In our project, our goal is to exclusively read Llama 3.1 8B/8B-Instruct model files. As a result, we have defined and implemented only the necessary opcodes and corresponding functions required for successfully reading this specific model file.

After defining supported opcode byte constants and reader functions, we need to register them into dispatcher map via init() function.

Also, we have stack []interface{} and metastack []interface{} arrays, also memo map[int]interface{} map in our PickleReader to store, collect, and structure already read data chunks.

from src/pickle/pickledispatch.go

const (
    ...
    PROTO byte = 0x80 // identify pickle protocol

    EMPTY_DICT      byte = '}'    // push empty dict
    BINPUT          byte = 'q'    //   "     "    "   "   " ;   "    " 1-byte arg
    MARK            byte = '('    // push special markobject on stack
    ...
    BINPERSID       byte = 'Q'    //  "       "         "  ;  "  "   "     "  stack
    ...
    REDUCE          byte = 'R'    // apply callable to argtuple, both on stack
    ...
)

type dispatchFunc = func(*PickleReader) error

var dispatcher = make(map[byte]dispatchFunc)

func init() {
    dispatcher[PROTO] = load_proto
    dispatcher[EMPTY_DICT] = load_empty_dictionary
    dispatcher[BINPUT] = load_binput
    dispatcher[MARK] = load_mark
    ...
    dispatcher[BINPERSID] = load_binpersid
    ...
    dispatcher[REDUCE] = load_reduce
    ...
}

2.2.4.2. Reader Functions Corresponding to Opcodes

To help you understand well, I'll provide some example reader functions/opcodes:

  • load_empty_dictionary (EMPTY_DICT byte = '}')

    Creates an empty dictionary (the term "dictionary" exists in the Python world, and we have defined PickleDict[T any], a custom type of map, to fulfill this custom requirement).

  • load_binput (BINPUT byte = 'q')

    Reads a byte i, takes the last element of stack and assigns it as i-th item of memo.

  • load_mark (MARK byte = '(')

    • Appends the stack array into metastack array (array of arrays),
    • Creates new stack array.

  • load_binpersid (BINPERSID byte = 'Q')

    • Pops the last item in the stack, which will be our pid argument,
    • Passes this pid (persistent id) argument to the PickleReader.persistentLoad(...) method,
    • Calls the custom PersistentLoadFn,
    • Appends the result into the stack.

    In our case, PersistentLoadFn is TorchModelReader.persistentLoad(...) method, pid argument is the name of the file containing tensor weights in the ZIP file.

    This method:

    • Finds the file header for specified file in the ZIP file,
    • Takes the offset (starting point location) of the file,
    • Creates a TorchStorage object, with memory-mapped rawData byte array,
    • And, returns it.

  • load_reduce (REDUCE byte = 'R')

    • Pops the last item in the stack, it will be our rawArgsArr argument array,
    • Takes the last item in the stack (this time we don't remove with pop),
    • Converts rawArgsArr items to expected data types of reflected function object fn,
    • Calls the fn with passing converted arguments, then replaces the last item in the stack with the function's result.

    In our case, fn can be:

from src/pickle/pickledispatch.go

func load_empty_dictionary(pr *PickleReader) error {
    pr.Append(NewPickleDict[interface{}]())
    return nil
}

func load_binput(pr *PickleReader) error {
    i, err := pr.ReadByte()
    if err != nil {
        return err
    }
    pr.memo[int(i)] = pr.stack[len(pr.stack)-1]
    return nil
}

func load_mark(pr *PickleReader) error {
    pr.metastack = append(pr.metastack, pr.stack)
    pr.stack = nil
    pr.stack = make([]interface{}, 0)
    return nil
}

func load_binpersid(pr *PickleReader) error {
    var pid interface{}
    pr.stack, pid = pop(pr.stack)
    result, err := pr.persistentLoad(pid.([]interface{}))
    if err != nil {
        return err
    }
    pr.Append(result)
    return nil
}

2.2.4.4. Reading the Whole File

In view of this succinct information, we can understand following simple flow. To read the Pickle file:

  • We initiate a loop,
  • Read a key (opcode byte),
  • Dispatch this opcode function,
  • Execute it,
  • Check for errors, and continue if no StopSignal is encountered.
  • If we get a StopSignal, its value is our result containing content map of the whole file.
  • We return this result as pickle.PickleDict[interface{}].

pickle.PickleDict[interface{}] consists of keys array and items map, imitating an OrderedDict in Python. Keys are stored in sorted array, items (values) are stored in a key-value structure.

Note: If you're curious about the details of how the Pickle file structure can be read, please refer to: 3. LOADING TORCH MODEL (DETAILS)

from src/pickle/picklereader.go

func (pr *PickleReader) Load() (*PickleDict[interface{}], error) {
    for {
        key, err := pr.ReadByte()
        if err != nil {
            return nil, err
        }
        err = dispatch(pr, key)
        if err != nil {
            if stopSignal, ok := err.(*StopSignal); ok {
                return stopSignal.Value, nil
            }
            return nil, err
        }
    }
}

Result pickle.PickleDict[interface{}] will be consisted of tensor names and ml.Tensor objects, will be seem like:

model.keys:
    [0]: "tok_embeddings.weight"
    [1]: "norm.weight"
    [2]: "output.weight"
    [3]: "layers.0.attention.wq.weight"
    [4]: "layers.0.attention.wk.weight"
    ...

model.items: 
"layers.0.attention.wo.weight": interface {}(*github.com/adalkiran/llama-nuts-and-bolts/src/ml.Tensor {Size: []int len: 2, cap: 2, [4096,4096],...

"layers.7.feed_forward.w2.weight": interface {}(*github.com/adalkiran/llama-nuts-and-bolts/src/ml.Tensor) *{Size: []int len: 2, cap: 2, [4096,14336],...

"layers.31.attention.wq.weight": interface {}(*github.com/adalkiran/llama-nuts-and-bolts/src/ml.Tensor) *{Size: []int len: 2, cap: 2, [4096,4096],...

"layers.1.feed_forward.w1.weight": interface {}(*github.com/adalkiran/llama-nuts-and-bolts/src/ml.Tensor) *{Size: []int len: 2, cap: 2, [14336,4096],...
...

2.2.5. Reading Pickle File - Returning Model Tensors

After running tmr.readPickleFile, the result *pickle.PickleDict[interface{}] is converted to *pickle.PickleDict[*ml.Tensor] object.

from src/torch/torchmodelreader.go

func (tmr *TorchModelReader) Load() (*pickle.PickleDict[*ml.Tensor], error) {
    ...
    modelTensorVals, err := tmr.readPickleFile(pklFileList[0])
    if err != nil {
        return nil, err
    }

    modelTensors := pickle.NewPickleDict[*ml.Tensor]()

    for _, key := range modelTensorVals.GetKeys() {
        val, _ := modelTensorVals.Get(key)
        tensorVal := val.(*ml.Tensor)
        tensorVal.Name = key
        modelTensors.Set(key, tensorVal)
    }
    modelTensorVals = nil

    return modelTensors, nil
}

Then, LoadModelEx function takes this result and assigns it to result object's Tensors property: model.Tensors.

from src/model/loader.go

func LoadModelEx(modelDir string, includeTensors bool, includeVocab bool) (*Model, error) {
    model := &Model{}
    if includeTensors {
        ...
        modelTensors, err := torchModelReader.Load()
        if err != nil {
            return nil, err
        }
        model.Tensors = modelTensors
        common.GLogger.ConsolePrintf("Found %d tensors in the model.", len(model.Tensors.GetKeys()))
    }
    ...
    return model, nil
}

Now,

  • The "data.pkl" file in the ZIP file "consolidated.00.pth" has been read,
  • Names and file locations of each tensor have been determined,
  • Memory-mapped []byte arrays have been defined for each tensor,
  • Tensor objects have been created and added into model.Tensors.

And we can see output lines in the console as follows:

[INFO] ... Loading model file: "/workspace/models-original/Meta-Llama-3.1-8B-Instruct/consolidated.00.pth"...
[INFO] ... Found 291 tensors in the model.