Skip to content

Latest commit

 

History

History
66 lines (57 loc) · 4.09 KB

README_en.md

File metadata and controls

66 lines (57 loc) · 4.09 KB
Raw

DAPLink-HS User Manual

Introduction

DAPLink-HS is a cmsis-dap high-speed debugger made by MuseLab which support SWD/JTAG and a USB CDC serial port. feature with Atmel ATSAM3U2C with USB High-Speed, it has a good performance of program and debug. currently there are two version with same function (USB-A version & TYPE-C version)

Feature

  • SWD interface
  • JTAG interface
  • 5V/3.3V power supply to target board
  • USB CDC serial port
  • drag-n-drop program
  • drag-n-drop firmware upgrade

MDK config

plug the debugger into PC USB, if everything is ok, there will appear a CDC port and a USB HID device
usb_device

Debugger Select

select CMSIS-DAP Debugger in Option -> Debug
debug_select

Target Detect

click Settings in Option -> Debug, recommend to select the swd port, and config the frequence to 10MHz target_id1

Flash Algorithm

you need to config the flash algorithm for your target mcu, here is a example with stm32f1x
Note: select the Reset and Run for target auto reset after program done. flash_algorithm

Reset Setting

Generally, you may need to start the mcu when program done, config the Reset type to SYSRESETREQ here and select Reset and Run in the Flash Download Page above. reset_select

DAPLink Usage

Drag and Drop

plug the DAPLink into PC USB, there will be a USB DISK appear called DAPLink, daplink_msd
DAPLink support drag and drop program, just drag the binary with suffix hex or bin into the DAPLink, the DAPLink will do all the program work.
Tips: one firmware can only support one type of MCU drag-n-drop program, for different type of MCU, you may need to compile the source yourself. please check here

Firmware Upgrade

DAPLink implement a bootloader with USB MSD, which made it very easy for the firmware upgrade.

  1. short the nRST and GND.
  2. plug the DAPLink into PC USB, a USB DISK named MAINTAINENCE will appear.
  3. disconnect the nRST and GND.
  4. drag the new firmware into the MAINTAINENCE, wait for a few moment, then upgrade done, a new USB DISK DAPLINK will appear with replace of MAINTAINENCE

Product Link

you can buy the DAPLink-HS from our offcial aliexpress shop Muse Lab Factory Store or click DAP-HS and Mini DAP-HS