modbus

[gimisa]

Thanks for the work . It did install and work fine for me . Congratulation .
But ya ... Had to remove it and return my home assistant to safe backup .
The reason is seem to be a conflict with modbus sensors. Strange as I dont
see the relation . But kwh stop registering in homeassistant while all other data remain accessible.

I run HA core under ubuntu 22.04 on a old desktop .
The files are installed and working properly in custom_components/alexa_media/
I validated that const.py does show version = "4.6.2"
I got everything working including credential and was able to send notification test to my alexa eco dot.
The logs does not reveals anything suspect except the warning [homeassistant.loader] We found a custom integration alexa_media which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you experience issues with Home Assistant

Here is configuration.yaml for these sensors as you can see nothing special to them .
No reason that the kwh ONLY does not appears after install of latest version of alexa_media_player.
If there is anything I can do to help in regard to this conflict between app let m know. I understand that not many of your user work with modbus so I understand if you consider this application irrelevant to dig further. But would appreciate a return in any case.

Again many thanks to you .

#modbus meeters
modbus:

• name: meter
  type: serial
  method: rtu
  port: /dev/ttyUSB1
  baudrate: 9600
  stopbits: 1
  bytesize: 8
  parity: N
  timeout: 1
  sensors:
  • name: 1-Solaire_Voltage
    unique_id: 1-Solaire_Voltage
    unit_of_measurement: V
    slave: 1
    address: 0
    input_type: input
    scale: 0.1
    offset: 0
    precision: 1
    data_type: int16
    device_class: voltage
  • name: 1-Solaire_Courent
    unique_id: 1-Solaire Courent
    unit_of_measurement: A
    slave: 1
    address: 1
    count: 2
    swap: word
    input_type: input
    scale: 0.001
    offset: 0
    precision: 2
    data_type: int32
    device_class: current
  • name: 1-Solaire_Power
    unique_id: 1-Solaire_Power
    unit_of_measurement: W
    slave: 1
    address: 3
    count: 2
    swap: word
    input_type: input
    scale: 0.1
    offset: 0
    precision: 1
    data_type: int32
    device_class: power
  • name: 1-Solaire_Wh
    unique_id: 1-Solaire_kWh
    unit_of_measurement: kWh
    slave: 1
    address: 5
    count: 2
    swap: word
    input_type: input
    scale: 0.001
    offset: 0
    precision: 1
    data_type: int32
    device_class: energy
    state_class: total_increasing
  • name: 1-Solaire_Frequency
    unique_id: 1-Solaire_Frequency
    unit_of_measurement: Hz
    slave: 1
    address: 7
    input_type: input
    scale: 0.1
    offset: 0
    precision: 1
    data_type: int16
    device_class: frequency
  • name: 1-Solaire_PowerFactor
    unique_id: 1-Solaire_PowerFactor
    unit_of_measurement: '%'
    slave: 1
    address: 8
    input_type: input
    scale: 1
    offset: 0
    precision: 0
    data_type: int16
    device_class: power_factor