kind-multizone-e2e.sh

#!/bin/sh
# Copyright 2018 The Kubernetes Authors.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# hack script for running a kind e2e
# must be run with a kubernetes checkout in $PWD (IE from the checkout)
# Usage: SKIP="ginkgo skip regex" FOCUS="ginkgo focus regex" kind-e2e.sh

set -o errexit -o nounset -o xtrace

# Settings:
# SKIP: ginkgo skip regex
# FOCUS: ginkgo focus regex
# GA_ONLY: true  - limit to GA APIs/features as much as possible
#          false - (default) APIs and features left at defaults
# 

# cleanup logic for cleanup on exit
CLEANED_UP=false
cleanup() {
  if [ "$CLEANED_UP" = "true" ]; then
    return
  fi
  # KIND_CREATE_ATTEMPTED is true once we: kind create
  if [ "${KIND_CREATE_ATTEMPTED:-}" = true ]; then
    kind "export" logs "${ARTIFACTS}/logs" || true
    kind delete cluster || true
  fi
  rm -f _output/bin/e2e.test || true
  # remove our tempdir, this needs to be last, or it will prevent kind delete
  if [ -n "${TMP_DIR:-}" ]; then
    rm -rf "${TMP_DIR:?}"
  fi
  CLEANED_UP=true
}

# setup signal handlers
signal_handler() {
  if [ -n "${GINKGO_PID:-}" ]; then
    kill -TERM "$GINKGO_PID" || true
  fi
  cleanup
}
trap signal_handler INT TERM

# build kubernetes / node image, e2e binaries and ginkgo
build() {
  # build the node image w/ kubernetes
  kind build node-image -v 1
  # Ginkgo v1 is used by Kubernetes 1.24 and earlier and exists in the vendor directory.
  # Historically it has been built with the "vendor" prefix.
  GINKGO_TARGET="vendor/github.com/onsi/ginkgo/ginkgo"
  if [ ! -d "$GINKGO_TARGET" ]; then
      # If the directory doesn't exist, then we must be on Kubernetes >= 1.25 with Ginkgo V2.
      # The "vendor" prefix is no longer needed.
      GINKGO_TARGET="github.com/onsi/ginkgo/v2/ginkgo"
  fi
  # make sure we have e2e requirements
  make all WHAT="cmd/kubectl test/e2e/e2e.test ${GINKGO_TARGET}"
}

check_structured_log_support() {
	case "${KUBE_VERSION}" in
		v1.1[0-8].*)
			echo "$1 is only supported on versions >= v1.19, got ${KUBE_VERSION}"
			exit 1
			;;
	esac
}

# up a cluster with kind
create_cluster() {
  # Grab the version of the cluster we're about to start
  KUBE_VERSION="$(docker run --rm --entrypoint=cat "kindest/node:latest" /kind/version)"

  # Default Log level for all components in test clusters
  KIND_CLUSTER_LOG_LEVEL=${KIND_CLUSTER_LOG_LEVEL:-4}

  # potentially enable --logging-format
  CLUSTER_LOG_FORMAT=${CLUSTER_LOG_FORMAT:-}
  scheduler_extra_args="      \"v\": \"${KIND_CLUSTER_LOG_LEVEL}\""
  controllerManager_extra_args="      \"v\": \"${KIND_CLUSTER_LOG_LEVEL}\""
  apiServer_extra_args="      \"v\": \"${KIND_CLUSTER_LOG_LEVEL}\""
  if [ -n "$CLUSTER_LOG_FORMAT" ]; then
      check_structured_log_support "CLUSTER_LOG_FORMAT"
      scheduler_extra_args="${scheduler_extra_args}
      \"logging-format\": \"${CLUSTER_LOG_FORMAT}\""
      controllerManager_extra_args="${controllerManager_extra_args}
      \"logging-format\": \"${CLUSTER_LOG_FORMAT}\""
      apiServer_extra_args="${apiServer_extra_args}
      \"logging-format\": \"${CLUSTER_LOG_FORMAT}\""
  fi
  kubelet_extra_args="      \"v\": \"${KIND_CLUSTER_LOG_LEVEL}\""
  KUBELET_LOG_FORMAT=${KUBELET_LOG_FORMAT:-$CLUSTER_LOG_FORMAT}
  if [ -n "$KUBELET_LOG_FORMAT" ]; then
      check_structured_log_support "KUBECTL_LOG_FORMAT"
      kubelet_extra_args="${kubelet_extra_args}
      \"logging-format\": \"${KUBELET_LOG_FORMAT}\""
  fi

  # JSON map injected into featureGates config
  feature_gates="{}"
  # --runtime-config argument value passed to the API server
  runtime_config="{}"

  case "${GA_ONLY:-false}" in
  false)
    feature_gates="{}"
    runtime_config="{}"
    ;;
  true)
    case "${KUBE_VERSION}" in
    v1.1[0-7].*)
      echo "GA_ONLY=true is only supported on versions >= v1.18, got ${KUBE_VERSION}"
      exit 1
      ;;
    v1.18.*)
      echo "Limiting to GA APIs and features (plus certificates.k8s.io/v1beta1 and RotateKubeletClientCertificate) for ${KUBE_VERSION}"
      feature_gates='{"AllAlpha":false,"AllBeta":false,"RotateKubeletClientCertificate":true}'
      runtime_config='{"api/alpha":"false", "api/beta":"false", "certificates.k8s.io/v1beta1":"true"}'
      ;;
    *)
      echo "Limiting to GA APIs and features for ${KUBE_VERSION}"
      feature_gates='{"AllAlpha":false,"AllBeta":false}'
      runtime_config='{"api/alpha":"false", "api/beta":"false"}'
      ;;
    esac
    ;;
  *)
    echo "\$GA_ONLY set to '${GA_ONLY}'; supported values are true and false (default)"
    exit 1
    ;;
  esac

  # create the config file
  cat <<EOF > "${ARTIFACTS}/kind-config.yaml"
kind: Cluster
apiVersion: kind.x-k8s.io/v1alpha4
featureGates:
  TopologyAwareHints: true
nodes:
- role: control-plane
- role: worker
  kubeadmConfigPatches:
  - |
    kind: JoinConfiguration
    nodeRegistration:
      kubeletExtraArgs:
        node-labels: "topology.kubernetes.io/zone=zone-a"
- role: worker
  kubeadmConfigPatches:
  - |
    kind: JoinConfiguration
    nodeRegistration:
      kubeletExtraArgs:
        node-labels: "topology.kubernetes.io/zone=zone-b"
- role: worker
  kubeadmConfigPatches:
  - |
    kind: JoinConfiguration
    nodeRegistration:
      kubeletExtraArgs:
        node-labels: "topology.kubernetes.io/zone=zone-c"
EOF
  # NOTE: must match the number of workers above
  NUM_NODES=2
  # actually create the cluster
  # TODO(BenTheElder): settle on verbosity for this script
  KIND_CREATE_ATTEMPTED=true
  kind create cluster \
    --image=kindest/node:latest \
    --retain \
    --wait=1m \
    -v=3 \
    "--config=${ARTIFACTS}/kind-config.yaml"

  # Patch kube-proxy to set the verbosity level
  kubectl patch -n kube-system daemonset/kube-proxy \
    --type='json' -p='[{"op": "add", "path": "/spec/template/spec/containers/0/command/-", "value": "--v='"${KIND_CLUSTER_LOG_LEVEL}"'" }]'
}

# run e2es with ginkgo-e2e.sh
run_tests() {
  # IPv6 clusters need some CoreDNS changes in order to work in k8s CI:
  # 1. k8s CI doesn´t offer IPv6 connectivity, so CoreDNS should be configured
  # to work in an offline environment:
  # https://github.com/coredns/coredns/issues/2494#issuecomment-457215452
  # 2. k8s CI adds following domains to resolv.conf search field:
  # c.k8s-prow-builds.internal google.internal.
  # CoreDNS should handle those domains and answer with NXDOMAIN instead of SERVFAIL
  # otherwise pods stops trying to resolve the domain.
  if [ "${IP_FAMILY:-ipv4}" = "ipv6" ]; then
    # Get the current config
    original_coredns=$(kubectl get -oyaml -n=kube-system configmap/coredns)
    echo "Original CoreDNS config:"
    echo "${original_coredns}"
    # Patch it
    fixed_coredns=$(
      printf '%s' "${original_coredns}" | sed \
        -e 's/^.*kubernetes cluster\.local/& internal/' \
        -e '/^.*upstream$/d' \
        -e '/^.*fallthrough.*$/d' \
        -e '/^.*forward . \/etc\/resolv.conf$/d' \
        -e '/^.*loop$/d' \
    )
    echo "Patched CoreDNS config:"
    echo "${fixed_coredns}"
    printf '%s' "${fixed_coredns}" | kubectl apply -f -
  fi

  # ginkgo regexes
  SKIP="${SKIP:-}"
  FOCUS="${FOCUS:-"\\[Conformance\\]"}"
  # if we set PARALLEL=true, skip serial tests set --ginkgo-parallel
  if [ "${PARALLEL:-false}" = "true" ]; then
    export GINKGO_PARALLEL=y
    if [ -z "${SKIP}" ]; then
      SKIP="\\[Serial\\]"
    else
      SKIP="\\[Serial\\]|${SKIP}"
    fi
  fi

  # setting this env prevents ginkgo e2e from trying to run provider setup
  export KUBERNETES_CONFORMANCE_TEST='y'
  # setting these is required to make RuntimeClass tests work ... :/
  export KUBE_CONTAINER_RUNTIME_ENDPOINT=unix:///run/containerd/containerd.sock
  export KUBE_CONTAINER_RUNTIME_NAME=containerd
  # ginkgo can take forever to exit, so we run it in the background and save the
  # PID, bash will not run traps while waiting on a process, but it will while
  # running a builtin like `wait`, saving the PID also allows us to forward the
  # interrupt
  ./hack/ginkgo-e2e.sh \
    '--provider=skeleton' "--num-nodes=${NUM_NODES}" \
    "--ginkgo.focus=${FOCUS}" "--ginkgo.skip=${SKIP}" \
    "--report-dir=${ARTIFACTS}" '--disable-log-dump=true' &
  GINKGO_PID=$!
  wait "$GINKGO_PID"
}

main() {
  # create temp dir and setup cleanup
  TMP_DIR=$(mktemp -d)

  # ensure artifacts (results) directory exists when not in CI
  export ARTIFACTS="${ARTIFACTS:-${PWD}/_artifacts}"
  mkdir -p "${ARTIFACTS}"

  # export the KUBECONFIG to a unique path for testing
  KUBECONFIG="${HOME}/.kube/kind-test-config"
  export KUBECONFIG
  echo "exported KUBECONFIG=${KUBECONFIG}"

  # debug kind version
  kind version

  # build kubernetes
  build
  # in CI attempt to release some memory after building
  if [ -n "${KUBETEST_IN_DOCKER:-}" ]; then
    sync || true
    echo 1 > /proc/sys/vm/drop_caches || true
  fi

  # create the cluster and run tests
  res=0
  create_cluster || res=$?
  run_tests || res=$?
  cleanup || res=$?
  exit $res
}

main