You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
First of all, thanks for your effort with this driver ambrosa.
You may have interest in adding this dvb-t to the supported devices.
I've been able to modify your code and get working this device which includes a rtl2382u.
USB_PID_SVEON_STV20_RTL2832U 1b80:d39d
This worked for Linux 3.2.0-2-686-pae #1 SMP Mon Mar 5 01:59:18 UTC 2012 i686 GNU/Linux
I didn't send you a patch since i applied a fast and not clean way to solve it, but any way if you ask for it I will try to send you a clean patch. (i'm yet a beginner)
Sorry if this is not the right place since i couldn't find email or other way to post this.
Best regards.
dmesg:
[ 6183.588141] usb 1-2: new high-speed USB device number 6 using ehci_hcd
[ 6183.730522] usb 1-2: New USB device found, idVendor=1b80, idProduct=d39d
[ 6183.730538] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6183.730551] usb 1-2: Product: SVEON STV20
[ 6183.730561] usb 1-2: Manufacturer: realtek
[ 6183.768601] IR NEC protocol handler initialized
[ 6183.791630] IR RC5(x) protocol handler initialized
[ 6183.800164] dvb-usb: found a 'RTL2832U DVB-T USB DEVICE' in warm state.
[ 6183.800195] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 6183.802004] DVB: registering new adapter (RTL2832U DVB-T USB DEVICE)
[ 6183.813289] IR RC6 protocol handler initialized
[ 6183.821775] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[ 6183.827830] IR JVC protocol handler initialized
[ 6183.834644] IR Sony protocol handler initialized
[ 6183.840233] IR MCE Keyboard/mouse protocol handler initialized
[ 6183.847282] lirc_dev: IR Remote Control driver registered, major 252
[ 6183.848808] IR LIRC bridge handler initialized
[ 6184.055139] RTL2832U check_tuner_type : FC0012 tuner on board...
[ 6184.621410] DVB: registering adapter 0 frontend 0 (Realtek DVB-T RTL2832)...
[ 6184.621944] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/input/input11
[ 6184.625851] dvb-usb: schedule remote query interval to 287 msecs.
[ 6184.625865] dvb-usb: RTL2832U DVB-T USB DEVICE successfully initialized and connected.
[ 6184.626871] usbcore: registered new interface driver dvb_usb_rtl2832u
part of my nasty patch:
rtl2832u.c
static struct usb_device_id rtl2832u_usb_table [] = {
First of all, thanks for your effort with this driver ambrosa.
You may have interest in adding this dvb-t to the supported devices.
I've been able to modify your code and get working this device which includes a rtl2382u.
USB_PID_SVEON_STV20_RTL2832U 1b80:d39d
This worked for Linux 3.2.0-2-686-pae #1 SMP Mon Mar 5 01:59:18 UTC 2012 i686 GNU/Linux
I didn't send you a patch since i applied a fast and not clean way to solve it, but any way if you ask for it I will try to send you a clean patch. (i'm yet a beginner)
Sorry if this is not the right place since i couldn't find email or other way to post this.
Best regards.
dmesg:
[ 6183.588141] usb 1-2: new high-speed USB device number 6 using ehci_hcd
[ 6183.730522] usb 1-2: New USB device found, idVendor=1b80, idProduct=d39d
[ 6183.730538] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6183.730551] usb 1-2: Product: SVEON STV20
[ 6183.730561] usb 1-2: Manufacturer: realtek
[ 6183.768601] IR NEC protocol handler initialized
[ 6183.791630] IR RC5(x) protocol handler initialized
[ 6183.800164] dvb-usb: found a 'RTL2832U DVB-T USB DEVICE' in warm state.
[ 6183.800195] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 6183.802004] DVB: registering new adapter (RTL2832U DVB-T USB DEVICE)
[ 6183.813289] IR RC6 protocol handler initialized
[ 6183.821775] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[ 6183.827830] IR JVC protocol handler initialized
[ 6183.834644] IR Sony protocol handler initialized
[ 6183.840233] IR MCE Keyboard/mouse protocol handler initialized
[ 6183.847282] lirc_dev: IR Remote Control driver registered, major 252
[ 6183.848808] IR LIRC bridge handler initialized
[ 6184.055139] RTL2832U check_tuner_type : FC0012 tuner on board...
[ 6184.621410] DVB: registering adapter 0 frontend 0 (Realtek DVB-T RTL2832)...
[ 6184.621944] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/input/input11
[ 6184.625851] dvb-usb: schedule remote query interval to 287 msecs.
[ 6184.625865] dvb-usb: RTL2832U DVB-T USB DEVICE successfully initialized and connected.
[ 6184.626871] usbcore: registered new interface driver dvb_usb_rtl2832u
part of my nasty patch:
rtl2832u.c
static struct usb_device_id rtl2832u_usb_table [] = {
rtl2832u.h
+#define USB_PID_SVEON_STV20_RTL2832U 0xd39d
The text was updated successfully, but these errors were encountered: