Description: Constructor for the
Parameters
kline_serial: The Serial port you will use to communicate with the ECU
k_out_pin: The TX pin of this serial
kline_baudrate: Optional, defaut to 10400. The baudrate for the kline,
Description: Enable the debug of the communication.
Parameters
debug_serial: The Serial port you will use for the debug information
debug_level: Optional, default to DEBUG_LEVEL_DEFAULT. The verbosity of the debug
debug_baudrate: Optional, default to 115200. The baudrate for the debug
Description: Change the debug level.
Parameters
debug_level: choose between DEBUG_LEVEL_NONE DEBUG_LEVEL_DEFAULT DEBUG_LEVEL_VERBOSE
Description: Disable the debug.
Description: Only for Suzuki: Enable the Dealer Mode.
Parameters
dealer_pin: The pin you will use to control it
Description: Only for Suzuki: Enable/Disable the Dealer Mode.
Parameters
dealer_mode: Choose between true/false
Description:
Description:
Description: Inizialize the the communication through the K-Line.
Description: Close the communication with the motorbike.
Description: Send a request to the ECU asking for data from all the sensors, to see them you can use `
Description: Read the Diagnostic Trouble Codes (DTC) from the ECU.
Parameters
which: Optional, default to READ_ONLY_ACTIVE. One of the values from the trouble_codes enum
Description: Clear the DTC from the ECU.
Parameters
code: Optional. Only the passed code will be cleared
Description: Keep the connection through the K-Line alive.
Parameters
time: Optional. It is calculated automatically to be a safe interval
Description: This function is the core of the library. You just need to give a PID and it will generate the header, calculate the checksum and try to send the request. Then it will check if the response is correct and if now it will try to send the request another two times, all is based on the ISO14230.
Parameters
to_send: The PID you want to send, see PID.h for more detail
send_len: The lenght of the PID (use sizeof to get it)
try_once: Optional, default to false. Choose if you want to try to send the request 3 times in case of error
Description:
Description: Ask and print the Timing Parameters from the ECU.
Parameters
read_only: Optional, default to true. This avoid the possibility to unintentionally change them
Description: Reset the Timing Parameters to the default settings from the ECU.
Description: Change the Timing Parameters to custom ones.
Parameters
new_atp: Array of 5 elements containing the new parameters
new_atp_len: The lenght of the array (use sizeof to get it)
Description: Print a rich and useful set of information about the ECU status and errors.
Parameters
time: Optional, default to 2000milliseconds. The time between one print and the other
Description: Print all the sensors data from the ECU, you need to run `
Description: Print the last response received from the ECU.
Description: Get the connection status.
Description: This say you only if there are/aren't errors, to see them use `
Description: Reset the errors from the ECU, use with caution.
Description: Get* the ECU sensor value you need GPS: Gear Position Sensor RPM: Right Per Minutes SPEED: speed of the bike TPS: Throttle Position Sensor IAP: Intake Air Pressure IAT: Intake Air Temperature ECT: Engine Coolant Temperature STPS: Secondary Throttle Position Sensor.
Description:
Description:
Description:
Description:
Description:
Description:
Description:
Documentation generated with Doxygen + Doxylite