virtual_disks: stabilize tests that check a new disk was added

libvirt/tests/cfg/virtual_disks/startup_policy.cfg

@@ -65,6 +65,7 @@
                             aarch64:
                                 disk_target_bus = "scsi"
                         - floppy:
+                            no s390-virtio
                             device_type = "floppy"
                             target_dev = "fda"
                             disk_target_bus = "fdc"
@@ -78,6 +79,7 @@
                                     target_dev = "vdb"
                                     disk_target_bus = "virtio"
                                 - sata_bus:
+                                    no s390-virtio
                                     target_dev = "sdb"
                                     disk_target_bus = "sata"
             variants:

libvirt/tests/src/virtual_disks/startup_policy.py

@@ -165,31 +165,30 @@ def create_disk_xml():
         shutil.copyfile(disk_xml, disk_xml_file)
         return disk_xml
 
-    def check_in_vm(old_parts):
+    def check_in_vm(old_parts, device_type):
         """
         Check mount/read/write disk in VM.
 
         :param old_parts: pre-operated partitions in VM.
+        :param device_type: test parameter, e.g. 'cdrom', 'floppy'
         :return: True if check successfully.
         """
         try:
             session = vm.wait_for_login()
-            new_parts = utils_disk.get_parts_list(session)
+            new_parts = utils_disk.get_parts_list_by_path(session)
             logging.debug("new parted:%s", new_parts)
             added_parts = list(set(new_parts).difference(set(old_parts)))
             logging.info("Added parts:%s", added_parts)
-            if len(added_parts) != 1:
-                logging.error("The number of new partitions is invalid in VM")
-                return False
-            added_part = added_parts[0]
-            if not added_part:
+            if len(added_parts) == 0:
                 logging.error("Can't see added partition in VM")
                 return False
-            if 'sr' not in added_part and 'fd' not in added_part:
-                cmd = ("fdisk -l /dev/{0} && mkfs.ext4 -F /dev/{0} && "
-                       "mkdir -p test && mount /dev/{0} test && echo"
+            added_part = added_parts[0]
+            if device_type not in ["cdrom", "floppy"]:
+
+                cmd = ("fdisk -l {0} && mkfs.ext4 -F {0} && "
+                       "mkdir -p test && mount {0} test && echo"
                        " teststring > test/testfile && umount test"
-                       .format(added_part))
+                       .format("/dev/disk/by-path/%s" % added_part))
                 status, output = session.cmd_status_output(cmd)
                 logging.info("Check disk operation in VM:\n%s", output)
                 if status != 0:
@@ -342,7 +341,7 @@ def rename_file(source_file, target_file, revert=False):
     if vm.is_dead():
         vm.start()
     session = vm.wait_for_login()
-    old_parts = utils_disk.get_parts_list(session)
+    old_parts = utils_disk.get_parts_list_by_path(session)
     session.close()
     vm.destroy(gracefully=False)
 
@@ -459,7 +458,7 @@ def rename_file(source_file, target_file, revert=False):
             # Step 1. Start domain and destroy it normally.
             vm.start()
             # Step 1 Start VM successfully.
-            if not check_in_vm(old_parts):
+            if not check_in_vm(old_parts, device_type):
                 test.fail("Check disk partitions in VM failed")
 
             # Step 2 Destroy VM, move the volume to other place, refresh the pool, then start the guest.

libvirt/tests/src/virtual_disks/virtual_disks_filedescriptor.py

@@ -29,7 +29,6 @@
 from virttest.utils_test import libvirt
 
 LOG = logging.getLogger('avocado.' + __name__)
-
 cleanup_files = []
 
 
@@ -50,7 +49,8 @@ def get_added_disks(old_partitions, test, params, env):
         session = vm.wait_for_login()
         if platform.platform().count('ppc64'):
             time.sleep(10)
-        added_partitions = utils_disk.get_added_parts(session, old_partitions)
+        added_partitions = utils_disk.get_added_parts_by_path(session,
+                                                              old_partitions)
         LOG.debug("Newly added partition(s) is: %s", added_partitions)
         return added_partitions
     except Exception as err:
@@ -235,6 +235,7 @@ def run(test, params, env):
     hotplug = "yes" == params.get("virt_device_hotplug")
     pkgs_host = params.get("pkgs_host", "")
     disk_readonly = params.get("disk_readonly", "no") == "yes"
+    part_path = "/dev/disk/by-path/%s"
 
     # Skip test if version not match expected one
     libvirt_version.is_libvirt_feature_supported(params)
@@ -243,7 +244,7 @@ def run(test, params, env):
     if vm.is_dead():
         vm.start()
     session = vm.wait_for_login()
-    old_partitions = utils_disk.get_parts_list(session)
+    old_partitions = utils_disk.get_parts_list_by_path(session)
     session.close()
     if not hotplug:
         vm.destroy(gracefully=False)
@@ -289,10 +290,10 @@ def run(test, params, env):
         if platform.platform().count('ppc64'):
             time.sleep(10)
         if disk_readonly:
-            if libvirt_disk.check_virtual_disk_io(vm, new_disk):
+            if libvirt_disk.check_virtual_disk_io(vm, new_disk, path=part_path):
                 test.fail("Expect the newly added disk is not writable, but actually it is")
         else:
-            if not libvirt_disk.check_virtual_disk_io(vm, new_disk):
+            if not libvirt_disk.check_virtual_disk_io(vm, new_disk, path=part_path):
                 test.fail("Cannot operate the newly added disk in vm.")
         virsh.detach_device(vm_name, device_obj.xml, flagstr="--live",
                             debug=True, ignore_status=False)

libvirt/tests/src/virtual_disks/virtual_disks_nbd.py

@@ -20,8 +20,6 @@
 from virttest.libvirt_xml.devices.disk import Disk
 
 
-# Using as lower capital is not the best way to do, but this is just a
-# workaround to avoid changing the entire file.
 logging = log.getLogger('avocado.' + __name__)
 
 
@@ -112,30 +110,29 @@ def _check_file_create(filename):
                       % snapshot_name2)
         _check_file_create("mem.txt")
 
-    def check_in_vm(target, old_parts):
+    def check_in_vm(old_parts):
         """
         Check mount/read/write disk in VM.
 
-        :param target: Disk dev in VM.
         :param old_parts: Original disk partitions in VM.
         :return: True if check successfully.
         """
         try:
             session = vm.wait_for_login()
             if platform.platform().count('ppc64'):
                 time.sleep(10)
-            new_parts = utils_disk.get_parts_list(session)
+            new_parts = utils_disk.get_parts_list_by_path(session)
             added_parts = list(set(new_parts).difference(set(old_parts)))
             logging.info("Added parts:%s", added_parts)
-            if len(added_parts) != 1:
+            if len(added_parts) == 0:
                 logging.error("The number of new partitions is invalid in VM")
                 return False
             else:
                 added_part = added_parts[0]
-            cmd = ("fdisk -l /dev/{0} && mkfs.ext4 -F /dev/{0} && "
-                   "mkdir -p test && mount /dev/{0} test && echo"
+            cmd = ("fdisk -l {0} && mkfs.ext4 -F {0} && "
+                   "mkdir -p test && mount {0} test && echo"
                    " teststring > test/testfile && umount test"
-                   .format(added_part))
+                   .format("/dev/disk/by-path/%s" % added_part))
             status, output = session.cmd_status_output(cmd)
             logging.debug("Disk operation in VM:\nexit code:\n%s\noutput:\n%s",
                           status, output)
@@ -176,7 +173,7 @@ def check_in_vm(target, old_parts):
     if vm.is_dead():
         vm.start()
     session = vm.wait_for_login()
-    old_parts = utils_disk.get_parts_list(session)
+    old_parts = utils_disk.get_parts_list_by_path(session)
     session.close()
     vm.destroy(gracefully=False)
 
@@ -278,7 +275,7 @@ def check_in_vm(target, old_parts):
         if check_partitions and not status_error:
             logging.debug("wait seconds for starting in checking vm part")
             time.sleep(2)
-            if not check_in_vm(device_target, old_parts):
+            if not check_in_vm(old_parts):
                 test.fail("Check disk partitions in VM failed")
         # Check snapshot operation and its result
         if domain_operation == 'snap_shot':