diff --git a/bbl/i18n/uk/BambuStudio_uk.po b/bbl/i18n/uk/BambuStudio_uk.po
index 50440cc20f..fbb390470a 100644
--- a/bbl/i18n/uk/BambuStudio_uk.po
+++ b/bbl/i18n/uk/BambuStudio_uk.po
@@ -11,7 +11,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
-"X-Generator: Poedit 3.4.2\n"
+"X-Generator: Poedit 3.5\n"
 
 msgid "Supports Painting"
 msgstr "Малювання підтримки"
@@ -108,6 +108,7 @@ msgid ""
 "Warning: All triangle areas are too small,The current function is not "
 "working."
 msgstr ""
+"Попередження: Усі площі трикутників занадто малі. Поточна функція не працює."
 
 msgid "Lay on face"
 msgstr "Покласти в обличчя"
@@ -157,22 +158,22 @@ msgid "Height range"
 msgstr "Діапазон висот"
 
 msgid "Shift + Enter"
-msgstr ""
+msgstr "Shift + Enter"
 
 msgid "Toggle Wireframe"
 msgstr "Переключення каркасу"
 
 msgid "Shift + L"
-msgstr ""
+msgstr "Shift + L"
 
 msgid "Toggle non-manifold edges"
-msgstr ""
+msgstr "Перемкнути некоректні ребра"
 
 msgid "Rotate horizontally"
 msgstr "Поверніть горизонтально"
 
 msgid "hit face"
-msgstr ""
+msgstr "вибрати грань"
 
 msgid "Shortcut Key "
 msgstr "Поєднання клавіш "
@@ -184,7 +185,7 @@ msgid "Height Range"
 msgstr "Переключити каркас"
 
 msgid "Place input box of bottom near mouse"
-msgstr ""
+msgstr "Розмістити поле введення внизу біля курсора миші"
 
 msgid "Vertical"
 msgstr "Вертикально"
@@ -245,13 +246,13 @@ msgid "mm"
 msgstr "мм"
 
 msgid "Part selection"
-msgstr ""
+msgstr "Вибір частини"
 
 msgid "Fixed step drag"
-msgstr ""
+msgstr "Фіксоване перетягування кроками"
 
 msgid "Single sided scaling"
-msgstr ""
+msgstr "Масштабування в одну сторону"
 
 msgid "Position"
 msgstr "Позиція"
@@ -287,22 +288,23 @@ msgid "Reset Rotation"
 msgstr "Скинути орієнтацію"
 
 msgid "Object coordinates"
-msgstr ""
+msgstr "Координати об’єкта"
 
 msgid "World coordinates"
 msgstr "Світові координати"
 
 msgid "Reset current rotation to real zeros."
-msgstr ""
+msgstr "Скинути поточне обертання до нульових значень."
 
 msgid "°"
 msgstr "°"
 
 msgid "Reset current rotation to the value when open the rotation tool."
 msgstr ""
+"Скинути поточне обертання до значення при відкритті інструмента обертання."
 
 msgid "Part coordinates"
-msgstr ""
+msgstr "Координати частини"
 
 msgid "%"
 msgstr "%"
@@ -384,7 +386,7 @@ msgid "Connector"
 msgstr "З'єднувач"
 
 msgid "Flip cut plane"
-msgstr ""
+msgstr "Інвертувати площину розрізу"
 
 msgid "Planar"
 msgstr "Плоский"
@@ -779,6 +781,9 @@ msgid ""
 "because the objects is restriced to bed \n"
 "and only parts can be lifted."
 msgstr ""
+"Рекомендується спочатку зібрати об’єкти,\n"
+"оскільки об’єкти обмежені платформою,\n"
+"і тільки частини можуть бути підняті."
 
 msgid "Face and face assembly"
 msgstr "Збірка грань до грані"
@@ -833,10 +838,10 @@ msgstr ""
 "глибина"
 
 msgid "Warning:Input cannot be empty!"
-msgstr ""
+msgstr "Попередження: Поле введення не може бути порожнім!"
 
 msgid "Warning:create text fail."
-msgstr ""
+msgstr "Попередження: не вдалося створити текст."
 
 msgid "Surface"
 msgstr "Поверхня"
@@ -845,75 +850,77 @@ msgid "Horizontal text"
 msgstr "Горизонтальний текст"
 
 msgid "Head diameter"
-msgstr ""
+msgstr "Діаметр головки"
 
 msgid "Max angle"
-msgstr ""
+msgstr "Максимальний кут"
 
 msgid "Detection radius"
-msgstr ""
+msgstr "Радіус виявлення"
 
 msgid "Remove selected points"
-msgstr ""
+msgstr "Видалити вибрані точки"
 
 msgid "Remove all points"
-msgstr ""
+msgstr "Видалити всі точки"
 
 msgid "Auto-generate points"
-msgstr ""
+msgstr "Автоматично згенерувати точки"
 
 msgid "Add a brim ear"
-msgstr ""
+msgstr "Додати краєчок"
 
 msgid "Delete a brim ear"
-msgstr ""
+msgstr "Видалити краєчок"
 
 msgid "Ctrl+Mouse wheel"
 msgstr "Ctrl+Колесо миші"
 
 msgid "Adjust section view"
-msgstr ""
+msgstr "Налаштувати вид секції"
 
 msgid ""
 "Warning: The brim type is not set to \"painted\",the brim ears will not take "
 "effect !"
 msgstr ""
+"Попередження: Тип краєчка не встановлено на “пофарбований”, краєчки не "
+"матимуть ефекту!"
 
 msgid "(Set the brim type to \"painted\")"
-msgstr ""
+msgstr "(Встановіть тип краєчка на “пофарбований”)"
 
 msgid " invalid brim ears"
-msgstr ""
+msgstr " Неправильні краєчки"
 
 msgid "Brim Ears"
-msgstr ""
+msgstr "Краєчки"
 
 msgid "Choose SVG file for emboss:"
-msgstr ""
+msgstr "Виберіть файл SVG для рельєфу:"
 
 #, boost-format
 msgid "File does NOT exist (%1%)."
-msgstr ""
+msgstr "Файл НЕ існує (%1%)."
 
 #, boost-format
 msgid "Filename has to end with \".svg\" but you selected %1%"
-msgstr ""
+msgstr "Ім’я файлу повинно закінчуватися на “.svg”, але ви вибрали %1%"
 
 #, boost-format
 msgid "Nano SVG parser can't load from file (%1%)."
-msgstr ""
+msgstr "Nano SVG парсер не може завантажити з файлу (%1%)."
 
 #, boost-format
 msgid "SVG file does NOT contain a single path to be embossed (%1%)."
-msgstr ""
+msgstr "SVG файл НЕ містить єдиного шляху для рельєфу (%1%)."
 
 #. TRN - Input label. Be short as possible
 msgid "Use surface"
-msgstr ""
+msgstr "Використовувати поверхню"
 
 #. TRN - Input label. Be short as possible
 msgid "From surface"
-msgstr ""
+msgstr "З поверхні"
 
 #. TRN - Input label. Be short as possible
 msgid "Mirror"
@@ -921,187 +928,192 @@ msgstr "Дзеркально"
 
 #, boost-format
 msgid "Opacity (%1%)"
-msgstr ""
+msgstr "Прозорість (%1%)"
 
 #, boost-format
 msgid "Color gradient (%1%)"
-msgstr ""
+msgstr "Колірний градієнт (%1%)"
 
 msgid "Undefined fill type"
-msgstr ""
+msgstr "Не визначено тип заливки"
 
 msgid "Linear gradient"
-msgstr ""
+msgstr "Лінійний градієнт"
 
 msgid "Radial gradient"
-msgstr ""
+msgstr "Радіальний градієнт"
 
 msgid "Open filled path"
-msgstr ""
+msgstr "Відкрита заповнена лінія"
 
 msgid "Undefined stroke type"
-msgstr ""
+msgstr "Не визначено тип обводки"
 
 msgid "Path can't be healed from selfintersection and multiple points."
-msgstr ""
+msgstr "Шлях не можна виправити через самоперетин і кілька точок."
 
 msgid ""
 "Final shape constains selfintersection or multiple points with same "
 "coordinate."
 msgstr ""
+"Фінальна форма містить самоперетин або кілька точок з однаковими "
+"координатами."
 
 #, boost-format
 msgid "Shape is marked as invisible (%1%)."
-msgstr ""
+msgstr "Форма позначена як невидима (%1%)."
 
 #. TRN: The first placeholder is shape identifier, the second one is text describing the problem.
 #, boost-format
 msgid "Fill of shape (%1%) contains unsupported: %2%."
-msgstr ""
+msgstr "Заповнення форми (%1%) містить непідтримуване: %2%."
 
 #, boost-format
 msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)."
-msgstr ""
+msgstr "Обводка форми (%1%) занадто тонка (мінімальна ширина - %2% мм)."
 
 #, boost-format
 msgid "Stroke of shape (%1%) contains unsupported: %2%."
-msgstr ""
+msgstr "Обводка форми (%1%) містить непідтримуване: %2%."
 
 msgid "Not valid state please report reproduction steps on github"
-msgstr ""
+msgstr "Невірний стан, будь ласка, повідомте про кроки відтворення на GitHub"
 
 msgid "No embossed file"
-msgstr ""
+msgstr "Файл з рельєфом не знайдено"
 
 msgid "Missing svg file in embossed shape"
-msgstr ""
+msgstr "Відсутній файл SVG у формі з рельєфом"
 
 msgid "Missing data of svg file"
-msgstr ""
+msgstr "Відсутні дані файлу SVG"
 
 msgid ""
 "Tip:If you want to place svg file on another part surface,\n"
 "you should select part first, and then drag svg file to the part surface."
 msgstr ""
+"Порада: Якщо ви хочете розмістити файл SVG на поверхні іншої частини,\n"
+"спочатку виберіть частину, а потім перетягніть файл SVG на поверхню частини."
 
 #. TRN - Preview of filename after clear local filepath.
 msgid "Unknown filename"
-msgstr ""
+msgstr "Невідоме ім’я файлу"
 
 #, boost-format
 msgid "SVG file path is \"%1%\""
-msgstr ""
+msgstr "Шлях до файлу SVG: “%1%”"
 
 msgid "Reload SVG file from disk."
-msgstr ""
+msgstr "Перезавантажити файл SVG з диска."
 
 msgid "Change file"
-msgstr ""
+msgstr "Змінити файл"
 
 msgid "Change to another .svg file"
-msgstr ""
+msgstr "Змінити на інший файл .svg"
 
 #. TRN: An menu option to convert the SVG into an unmodifiable model part.
 msgid "Bake to model"
-msgstr ""
+msgstr "Випікати в модель"
 
 #. TRN: Tooltip for the menu item.
 msgid "Bake into model as uneditable part"
-msgstr ""
+msgstr "Випікати в модель як нев редаговану частину"
 
 msgid "Save as"
-msgstr ""
+msgstr "Зберегти як"
 
 msgid "Save SVG file"
-msgstr ""
+msgstr "Зберегти файл SVG"
 
 msgid "Save as '.svg' file"
-msgstr ""
+msgstr "Зберегти як файл ‘.svg’"
 
 msgid "Size in emboss direction."
-msgstr ""
+msgstr "Розмір у напрямку рельєфу."
 
 #. TRN: The placeholder contains a number.
 #, boost-format
 msgid "Scale also changes amount of curve samples (%1%)"
-msgstr ""
+msgstr "Масштаб також змінює кількість зразків кривих (%1%)."
 
 msgid "width:"
-msgstr ""
+msgstr "ширина:"
 
 msgid "height:"
-msgstr ""
+msgstr "висота:"
 
 msgid "set width and height keep ratio with width"
-msgstr ""
+msgstr "встановіть ширину та висоту, зберігаючи співвідношення з шириною"
 
 msgid "Width of SVG."
-msgstr ""
+msgstr "Ширина SVG."
 
 msgid "Height of SVG."
-msgstr ""
+msgstr "Висота SVG."
 
 msgid "Lock/unlock the aspect ratio of the SVG."
-msgstr ""
+msgstr "Заблокувати/розблокувати співвідношення сторін SVG."
 
 msgid "Reset scale"
-msgstr ""
+msgstr "Скинути масштаб"
 
 msgid "Distance of the center of the SVG to the model surface."
-msgstr ""
+msgstr "Відстань від центру SVG до поверхні моделі."
 
 msgid "Reset distance"
-msgstr ""
+msgstr "Скинути відстань"
 
 msgid "Rotate text Clock-wise."
-msgstr ""
+msgstr "Обертати текст за годинниковою стрілкою."
 
 msgid "Reset rotation"
-msgstr ""
+msgstr "Скинути обертання"
 
 msgid "Lock/unlock rotation angle when dragging above the surface."
 msgstr ""
+"Заблокувати/розблокувати кут обертання при перетягуванні над поверхнею."
 
 msgid "Mirror vertically"
-msgstr ""
+msgstr "Відобразити вертикально"
 
 msgid "Mirror horizontally"
-msgstr ""
+msgstr "Відобразити горизонтально"
 
 msgid "Set Mirror"
-msgstr ""
+msgstr "Встановити дзеркало"
 
 msgid "Face the camera"
-msgstr ""
+msgstr "Ставити обличчям до камери"
 
 msgid "Operation"
-msgstr ""
+msgstr "Операція"
 
 msgid "Join"
-msgstr ""
+msgstr "Об’єднати"
 
 msgid "Click to change text into object part."
-msgstr ""
+msgstr "Натисніть, щоб перетворити текст в об’єкт частини."
 
 msgid "You can't change a type of the last solid part of the object."
-msgstr ""
+msgstr "Ви не можете змінити тип останньої твердої частини об’єкта."
 
 msgctxt "EmbossOperation"
 msgid "Cut"
-msgstr ""
+msgstr "Вирізати"
 
 msgid "Click to change part type into negative volume."
-msgstr ""
+msgstr "Натисніть, щоб змінити тип частини на негативний об’єм."
 
 msgid "Modifier"
 msgstr "Модифікатор"
 
 msgid "Click to change part type into modifier."
-msgstr ""
+msgstr "Натисніть, щоб змінити тип частини на модифікатор."
 
 #. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else).
 msgid "Change SVG Type"
-msgstr ""
+msgstr "Змінити тип SVG"
 
 msgid "Ctrl+"
 msgstr "Ctrl+"
@@ -1264,13 +1276,13 @@ msgid "User logged out"
 msgstr "Користувач вийшов із системи"
 
 msgid "Install network plug-in"
-msgstr ""
+msgstr "Встановити мережевий плагін"
 
 msgid "Please Install network plug-in before log in."
-msgstr ""
+msgstr "Будь ласка, встановіть мережевий плагін перед входом."
 
 msgid "Install Network Plug-in"
-msgstr ""
+msgstr "Встановити мережевий плагін"
 
 msgid "new or open project file is not allowed during the slicing process!"
 msgstr "новий або відкритий файл проекту не дозволяється в процесі нарізки!"
@@ -1409,22 +1421,22 @@ msgid "Add support enforcer"
 msgstr "Додати засіб примусової підтримки"
 
 msgid "Add text"
-msgstr ""
+msgstr "Додати текст"
 
 msgid "Add negative text"
-msgstr ""
+msgstr "Додати негативний текст"
 
 msgid "Add text modifier"
-msgstr ""
+msgstr "Додати модифікатор тексту"
 
 msgid "Add SVG part"
-msgstr ""
+msgstr "Додати частину SVG"
 
 msgid "Add negative SVG"
-msgstr ""
+msgstr "Додати негативний SVG"
 
 msgid "Add SVG modifier"
-msgstr ""
+msgstr "Додати модифікатор SVG"
 
 msgid "Select settings"
 msgstr "Виберіть налаштування"
@@ -1442,16 +1454,16 @@ msgid "Delete the selected object"
 msgstr "Видалити вибраний об'єкт"
 
 msgid "Delete all cutter"
-msgstr ""
+msgstr "Видалити всі різаки"
 
 msgid "Edit Text"
 msgstr "Редагувати текст"
 
 msgid "Edit SVG"
-msgstr ""
+msgstr "Редагувати SVG"
 
 msgid "Change SVG source file, projection, size, ..."
-msgstr ""
+msgstr "Змінити вихідний файл SVG, проекцію, розмір тощо."
 
 msgid "Load..."
 msgstr "Завантажити..."
@@ -1466,7 +1478,7 @@ msgid "Cone"
 msgstr "Конус"
 
 msgid "Double Tear Romboid Cylinder"
-msgstr ""
+msgstr "Подвійний сльозоподібний ромбоподібний циліндр"
 
 msgid "Disc"
 msgstr "Диск"
@@ -1490,7 +1502,7 @@ msgid "ksr FDMTest"
 msgstr "ksr FDMTest"
 
 msgid "SVG"
-msgstr ""
+msgstr "SVG"
 
 msgid "Height range Modifier"
 msgstr "Модифікатор діапазону висот"
@@ -1581,7 +1593,7 @@ msgid "Restore to meter"
 msgstr "Відновити в метричну"
 
 msgid "Merge"
-msgstr ""
+msgstr "Об’єднати"
 
 msgid "Assemble the selected objects to an object with multiple parts"
 msgstr "Зберіть вибрані об'єкти в об'єкт з кількома частинами"
@@ -2229,6 +2241,8 @@ msgid ""
 "The following plates are skipped due to different arranging settings from "
 "global:"
 msgstr ""
+"Наступні пластини пропущені через різні налаштування розташування від "
+"глобальних:"
 
 msgid ""
 "This plate is locked,\n"
@@ -2306,19 +2320,19 @@ msgstr "Заповнення ліжка виконане."
 #. TRN: This is the title of the action appearing in undo/redo stack.
 #. It is same for Text and SVG.
 msgid "Emboss attribute change"
-msgstr ""
+msgstr "Зміна атрибута рельєфу"
 
 msgid "Add Emboss text object"
-msgstr ""
+msgstr "Додати об’єкт тексту з рельєфом"
 
 msgid "Add Emboss text Volume"
-msgstr ""
+msgstr "Додати об’єм тексту з рельєфом"
 
 msgid "Font doesn't have any shape for given text."
-msgstr ""
+msgstr "Шрифт не має жодної форми для вказаного тексту."
 
 msgid "There is no valid surface for text projection."
-msgstr ""
+msgstr "Немає дійсної поверхні для проекції тексту."
 
 msgid "Error! Unable to create thread!"
 msgstr "Помилка! Неможливо створити тему!"
@@ -2633,11 +2647,13 @@ msgstr "Спочатку потрібно вибрати тип матеріал
 
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
-msgstr ""
+msgstr "Будь ласка, введіть допустиме значення (K у межах %.1f~%.1f)"
 
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)"
 msgstr ""
+"Будь ласка, введіть допустиме значення (K у межах %.1f~%.1f, N у межах "
+"%.1f~%.1f)"
 
 msgid "Other Color"
 msgstr "Інший колір"
@@ -2740,7 +2756,7 @@ msgstr ""
 "Друкуйте з використанням філаменту, встановленого на задній частині шасі"
 
 msgid "Current AMS humidity"
-msgstr ""
+msgstr "Поточна вологість AMS"
 
 msgid ""
 "Please change the desiccant when it is too wet. The indicator may not "
@@ -3735,16 +3751,16 @@ msgid "Sequence"
 msgstr "Послідовність"
 
 msgid "object selection"
-msgstr ""
+msgstr "вибір об’єкта"
 
 msgid "part selection"
-msgstr ""
+msgstr "вибір частини"
 
 msgid "number keys"
-msgstr ""
+msgstr "клавіші з числами"
 
 msgid "number keys can quickly change the color of objects"
-msgstr ""
+msgstr "клавіші з числами можуть швидко змінювати колір об’єктів"
 
 msgid "Mirror Object"
 msgstr "Дзеркальний об'єкт"
@@ -3847,7 +3863,7 @@ msgid "Assemble Control"
 msgstr "Складання керування"
 
 msgid "Selection Mode"
-msgstr ""
+msgstr "Режим вибору"
 
 msgid "Total Volume:"
 msgstr "Загальний обсяг:"
@@ -4054,7 +4070,7 @@ msgid "Check for Update"
 msgstr "Перевірити оновлення"
 
 msgid "Check for Presets Update"
-msgstr ""
+msgstr "Перевірити оновлення пресетів"
 
 msgid "Open Network Test"
 msgstr "Відкритий мережевий тест"
@@ -4180,7 +4196,7 @@ msgid "Export current plate as G-code"
 msgstr "Експортувати поточну пластину як G-код"
 
 msgid "Export Preset Bundle"
-msgstr ""
+msgstr "Експортувати пакет пресетів"
 
 msgid "Export current configuration to files"
 msgstr "Експорт поточної конфігурації до файлів"
@@ -4189,7 +4205,7 @@ msgid "Export"
 msgstr "Експорт"
 
 msgid "Publish to MakerWorld"
-msgstr ""
+msgstr "Опублікувати на MakerWorld"
 
 msgid "Quit"
 msgstr "Вихід"
@@ -4261,10 +4277,10 @@ msgid "Show object overhang highlight in 3D scene"
 msgstr "Показати підсвічування виступу об'єкта у 3D сцені"
 
 msgid "Set 3DConnexion"
-msgstr ""
+msgstr "Налаштувати 3DConnexion"
 
 msgid "Set 3DConnexion mouse"
-msgstr ""
+msgstr "Налаштувати мишу 3DConnexion"
 
 msgid "Services"
 msgstr "Послуги"
@@ -4484,10 +4500,10 @@ msgstr ""
 "спробувати ще раз."
 
 msgid "Temporarily closed because there is no operating for a long time."
-msgstr ""
+msgstr "Тимчасово закрито через тривалу відсутність дій."
 
 msgid "Temporarily closed because there is no printing for a while."
-msgstr ""
+msgstr "Тимчасово закрито через відсутність друку протягом деякого часу."
 
 msgid "Please confirm if the printer is connected."
 msgstr "Будь ласка, підтвердіть, чи принтер підключений."
@@ -4533,7 +4549,7 @@ msgid "The printer has been logged out and cannot connect."
 msgstr "Принтер був вийшов із системи та не може підключитися."
 
 msgid "Video Stopped."
-msgstr ""
+msgstr "Відео зупинено."
 
 msgid "LAN Connection Failed (Failed to start liveview)"
 msgstr ""
@@ -4776,12 +4792,14 @@ msgid "Layer: N/A"
 msgstr "Шар: немає даних"
 
 msgid "Finish Time: N/A"
-msgstr ""
+msgstr "Час завершення: Н/Д"
 
 msgid ""
 "The estimated printing time for \n"
 "multi-color models may be inaccurate."
 msgstr ""
+"Орієнтовний час друку для\n"
+"багатокольорових моделей може бути неточним."
 
 msgid "Clear"
 msgstr "Очищення"
@@ -4808,7 +4826,7 @@ msgid "Finished"
 msgstr "Завершено"
 
 msgid "Finish Time: "
-msgstr ""
+msgstr "Час завершення: "
 
 msgid "Camera"
 msgstr "Камера"
@@ -4877,13 +4895,13 @@ msgid "Layer: %d/%d"
 msgstr "Шар: %d/%d"
 
 msgid "Auto homing"
-msgstr ""
+msgstr "Автохомінг"
 
 msgid "Are you sure you want to trigger auto homing?"
-msgstr ""
+msgstr "Ви впевнені, що хочете запустити автохомінг?"
 
 msgid "Homing"
-msgstr ""
+msgstr "Хоумінг"
 
 msgid ""
 "Please heat the nozzle to above 170 degree before loading or unloading "
@@ -5034,43 +5052,44 @@ msgstr ""
 "мати принаймні один успішний запис про друк з цим профілем друку."
 
 msgid "Step file import parameters"
-msgstr ""
+msgstr "Параметри імпорту STEP-файлу"
 
 msgid "Rough"
-msgstr ""
+msgstr "Грубо"
 
 msgid "Reduce Linear"
-msgstr ""
+msgstr "Зменшити лінійно"
 
 msgid "Reduce Angle"
-msgstr ""
+msgstr "Зменшити кут"
 
 msgid "Fewer faces"
-msgstr ""
+msgstr "Менше граней"
 
 msgid "More faces"
-msgstr ""
+msgstr "Більше граней"
 
 msgid "Linear Deflection"
-msgstr ""
+msgstr "Лінійне відхилення"
 
 msgid "Please input a valid value (0.001 < linear deflection < 0.1)"
 msgstr ""
+"Будь ласка, введіть допустиме значення (0.001 < лінійне відхилення < 0.1)"
 
 msgid "Angle Deflection"
-msgstr ""
+msgstr "Відхилення кута"
 
 msgid "Please input a valid value (0.01 < angle deflection < 1.0)"
-msgstr ""
+msgstr "Будь ласка, введіть допустиме значення (0.01 < відхилення кута < 1.0)"
 
 msgid "Number of triangular facets"
-msgstr ""
+msgstr "Кількість трикутних граней"
 
 msgid "0"
 msgstr "0"
 
 msgid "Calculating, please wait..."
-msgstr ""
+msgstr "Розрахунок, будь ласка, зачекайте…"
 
 msgid "Status"
 msgstr "Статус"
@@ -5142,23 +5161,27 @@ msgid "Not for now"
 msgstr "Наразі не потрібно"
 
 msgid "Server Exception"
-msgstr ""
+msgstr "Помилка сервера"
 
 msgid ""
 "The server is unable to respond. Please click the link below to check the "
 "server status."
 msgstr ""
+"Сервер не може відповісти. Будь ласка, натисніть на посилання нижче, щоб "
+"перевірити стан сервера."
 
 msgid ""
 "If the server is in a fault state, you can temporarily use offline printing "
 "or local network printing."
 msgstr ""
+"Якщо сервер перебуває в стані збою, ви можете тимчасово використовувати "
+"офлайн-друк або друк через локальну мережу."
 
 msgid "How to use LAN only mode"
-msgstr ""
+msgstr "Як використовувати режим лише локальної мережі"
 
 msgid "Don't show this dialog again"
-msgstr ""
+msgstr "Більше не показувати це діалогове вікно"
 
 msgid "3D Mouse disconnected."
 msgstr "3D-миша відключена."
@@ -5392,7 +5415,7 @@ msgid "Invalid name, the following characters are not allowed:"
 msgstr "Неприпустиме ім'я, такі символи не допускаються:"
 
 msgid "(Including its escape characters)"
-msgstr ""
+msgstr "(Включаючи його символи екранування)"
 
 msgid "Sliced Info"
 msgstr "Нарізана інформація"
@@ -5548,6 +5571,8 @@ msgid ""
 "Due to the lower version of Bambu Studio, this 3mf file cannot be fully "
 "loaded. Please update Bambu Studio to the latest version"
 msgstr ""
+"Через застарілу версію Bambu Studio цей файл 3mf не може бути повністю "
+"завантажений. Будь ласка, оновіть Bambu Studio до останньої версії"
 
 msgid "Found following keys unrecognized:\n"
 msgstr "Знайдені наступні невпізнані ключі:\n"
@@ -5772,6 +5797,9 @@ msgid ""
 "Please check whether the folder exists online or if other programs open the "
 "project file or if there is enough disk space."
 msgstr ""
+"Не вдалося зберегти проєкт.\n"
+"Перевірте, чи існує папка онлайн, чи інші програми не відкрили файл проєкту, "
+"або чи достатньо місця на диску."
 
 msgid "Save project"
 msgstr "Зберегти проект"
@@ -5824,7 +5852,7 @@ msgid "Import geometry only"
 msgstr "Імпортувати лише геометрію"
 
 msgid "Please import multiple files with the same suffix."
-msgstr ""
+msgstr "Будь ласка, імпортуйте кілька файлів з однаковим суфіксом."
 
 msgid "Only one G-code file can be opened at the same time."
 msgstr "Водночас можна відкрити лише один файл G-коду."
@@ -5914,9 +5942,12 @@ msgid ""
 "3MF file?\n"
 "If you hit 'NO', all SVGs in the project will not be editable any more."
 msgstr ""
+"Ви впевнені, що хочете зберегти оригінальні SVG з їхніми локальними шляхами "
+"у файл 3MF?\n"
+"Якщо натиснете “НІ”, всі SVG у проєкті більше не можна буде редагувати."
 
 msgid "Private protection"
-msgstr ""
+msgstr "Приватний захист"
 
 msgid ""
 "Print By Object: \n"
@@ -5944,15 +5975,17 @@ msgid "Plate Settings"
 msgstr "Налаштування столу"
 
 msgid "Prime Tower:"
-msgstr ""
+msgstr "Башта стабілізації:"
 
 msgid ""
 "A cube printed during a filament change to purge old color and ensure smooth "
 "color transition."
 msgstr ""
+"Куб, надрукований під час зміни філамента, щоб очистити старий колір і "
+"забезпечити плавний перехід кольору."
 
 msgid "View Wiki for more information"
-msgstr ""
+msgstr "Перегляньте Вікі для отримання додаткової інформації"
 
 #, boost-format
 msgid "Number of currently selected parts: %1%\n"
@@ -6000,6 +6033,9 @@ msgid ""
 "\"Fix Model\" feature is currently only on Windows. Please use a third-party "
 "tool to repair the model before importing it into Bambu Studio, such as "
 msgstr ""
+"Функція “Виправити модель” наразі доступна лише на Windows. Будь ласка, "
+"використовуйте сторонній інструмент для виправлення моделі перед її імпортом "
+"у Bambu Studio, наприклад "
 
 #, c-format, boost-format
 msgid ""
@@ -6044,9 +6080,12 @@ msgid ""
 "case.\n"
 "Enabled LOD requires application restart."
 msgstr ""
+"Зверніть увагу, що відображення моделі зазнає певних змін у випадку малих "
+"пікселів.\n"
+"Увімкнення LOD потребує перезапуску програми."
 
 msgid "Enable LOD"
-msgstr ""
+msgstr "Увімкнути LOD"
 
 msgid "Browse"
 msgstr "Огляд"
@@ -6145,13 +6184,13 @@ msgstr ""
 "одночасно та керувати декількома пристроями."
 
 msgid "Support beta version update."
-msgstr ""
+msgstr "Оновлення бета-версії підтримки."
 
 msgid "With this option enabled, you can receive beta version updates."
-msgstr ""
+msgstr "З увімкненою цією опцією ви можете отримувати оновлення бета-версій."
 
 msgid "3D Settings"
-msgstr ""
+msgstr "Налаштування 3D"
 
 msgid "Zoom to mouse position"
 msgstr "Збільшити до позиції миші"
@@ -6163,29 +6202,35 @@ msgstr ""
 "Наблизьтеся до положення покажчика миші у 3D-виді, а не до центру 2D вікна."
 
 msgid "Always show shells in preview"
-msgstr ""
+msgstr "Завжди показувати оболонки в попередньому перегляді"
 
 msgid ""
 "Always show shells or not in preview view tab.If change value,you should "
 "reslice."
 msgstr ""
+"Завжди показувати оболонки або ні у вкладці попереднього перегляду. Якщо "
+"змінити значення, потрібно повторно нарізати."
 
 msgid "Improve rendering performance by lod"
-msgstr ""
+msgstr "Покращити продуктивність рендерингу за допомогою LOD"
 
 msgid ""
 "Improved rendering performance under the scene of multiple plates and many "
 "models."
 msgstr ""
+"Покращена продуктивність рендерингу в умовах кількох пластин і багатьох "
+"моделей."
 
 msgid "Grabber scale"
-msgstr ""
+msgstr "Масштаб захоплювача"
 
 msgid "Set grabber size for move,rotate,scale tool."
 msgstr ""
+"Встановіть розмір захоплювача для інструментів переміщення, обертання та "
+"масштабування."
 
 msgid "Value range"
-msgstr ""
+msgstr "Діапазон значень"
 
 msgid "Presets"
 msgstr "Пресети"
@@ -6198,14 +6243,18 @@ msgid ""
 "If enabled, auto sync user presets with cloud after Bambu Studio startup or "
 "presets modified."
 msgstr ""
+"Якщо увімкнено, автоматично синхронізуйте користувацькі пресети з хмарою "
+"після запуску Bambu Studio або при зміні пресетів."
 
 msgid "Auto check for system presets updates"
-msgstr ""
+msgstr "Автоматично перевіряти оновлення системних пресетів"
 
 msgid ""
 "If enabled, auto check whether there are system presets updates after Bambu "
 "Studio startup."
 msgstr ""
+"Якщо увімкнено, автоматично перевіряти наявність оновлень системних пресетів "
+"після запуску Bambu Studio."
 
 msgid "Clear my choice on the unsaved presets."
 msgstr "Очистіть мій вибір від незахищених пресетів."
@@ -6275,12 +6324,14 @@ msgid "Media"
 msgstr "Media"
 
 msgid "Keep liveview when printing."
-msgstr ""
+msgstr "Зберігати живий перегляд під час друку."
 
 msgid ""
 "By default, Liveview will pause after 15 minutes of inactivity on the "
 "computer. Check this box to disable this feature during printing."
 msgstr ""
+"За замовчуванням, Liveview буде призупинено після 15 хвилин бездіяльності на "
+"комп’ютері. Відмітьте це поле, щоб вимкнути цю функцію під час друку."
 
 msgid "Dark Mode"
 msgstr "Темний режим"
@@ -6635,7 +6686,7 @@ msgid "Busy"
 msgstr "Зайнятий"
 
 msgid "Bambu Cool Plate SuperTack"
-msgstr ""
+msgstr "Bambu Cool Plate SuperTack"
 
 msgid "Bambu Cool Plate"
 msgstr "Bambu Cool Plate"
@@ -6874,16 +6925,20 @@ msgid "Bind with Pin Code"
 msgstr "Прив’язати за допомогою Пін-коду"
 
 msgid "Bind with Access Code"
-msgstr ""
+msgstr "Прив’язати з кодом доступу"
 
 msgid ""
 "Please log in before binding your device with a PIN code.\n"
 "Alternatively, you can use LAN mode to bind your device. Learn about LAN "
 "mode."
 msgstr ""
+"Будь ласка, увійдіть в систему перед прив’язкою вашого пристрою за допомогою "
+"PIN-коду.\n"
+"Альтернативно, ви можете використовувати режим LAN для прив’язки вашого "
+"пристрою. Дізнайтеся про режим LAN."
 
 msgid "Go to Login"
-msgstr ""
+msgstr "Перейти до входу"
 
 msgid "Send to Printer SD card"
 msgstr "Надіслати на SD-карту принтера"
@@ -7108,6 +7163,8 @@ msgid ""
 "Layer height is too small.\n"
 "It will set to min_layer_height\n"
 msgstr ""
+"Висота шару занадто мала.\n"
+"Вона буде встановлена на min_layer_height.\n"
 
 msgid ""
 "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer "
@@ -7151,8 +7208,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "При записі таймлапсу без інструментальної головки рекомендується додати "
 "“Timelapse Wipe Tower” \n"
@@ -7163,6 +7220,8 @@ msgid ""
 "The notes are too large, and may not be synchronized to the cloud. Please "
 "keep it within 40k."
 msgstr ""
+"Занадто великі нотатки можуть не синхронізуватися з хмарою. Будь ласка, "
+"зберігайте їх в межах 40к."
 
 msgid "Line width"
 msgstr "Ширина лінії"
@@ -7219,7 +7278,7 @@ msgid "Support filament"
 msgstr "Філамент підтримки"
 
 msgid "Tree Support"
-msgstr ""
+msgstr "Деревоподібна підтримка"
 
 msgid "Prime tower"
 msgstr "Підставка для очищення форсунки"
@@ -7262,6 +7321,8 @@ msgid ""
 "Custom G-code files are too large, and may not be synchronized to the cloud. "
 "Please keep it within 40k."
 msgstr ""
+"Користувацькі файли G-коду занадто великі і можуть не синхронізуватися з "
+"хмарою. Будь ласка, зберігайте їх в межах 40к."
 
 msgid "Setting Overrides"
 msgstr "Налаштування перевизначень"
@@ -7293,6 +7354,8 @@ msgid ""
 "Bed temperature when cool plate is installed. Value 0 means the filament "
 "does not support to print on the Bambu Cool Plate SuperTack"
 msgstr ""
+"Температура платформи, коли встановлено охолоджуючу плиту. Значення 0 "
+"означає, що філамент не підтримує друк на Bambu Cool Plate SuperTack"
 
 msgid "Cool Plate / PLA Plate"
 msgstr "Cool Plate / PLA Plate"
@@ -7341,7 +7404,7 @@ msgid "Volumetric speed limitation"
 msgstr "Об'ємне обмеження швидкості"
 
 msgid "Filament scarf seam settings"
-msgstr ""
+msgstr "Налаштування шва шарфа для філамента"
 
 msgid "Cooling"
 msgstr "Охолодження"
@@ -8135,7 +8198,7 @@ msgid "Confirm and Update Nozzle"
 msgstr "Підтвердити і оновити сопло"
 
 msgid "Connect the printer using IP and access code"
-msgstr ""
+msgstr "Підключити принтер за допомогою IP-адреси та коду доступу"
 
 msgid ""
 "Step 1, please confirm Bambu Studio and your printer are in the same LAN."
@@ -8161,28 +8224,30 @@ msgstr ""
 "Крок 3: Виконайте пінг до IP-адреси для перевірки втрат пакетів та затримки."
 
 msgid "Connect"
-msgstr ""
+msgstr "Підключити"
 
 msgid "connecting..."
-msgstr ""
+msgstr "підключення…"
 
 msgid "Failed to connect to printer."
-msgstr ""
+msgstr "Не вдалося підключитися до принтера."
 
 msgid "Failed to publish login request."
-msgstr ""
+msgstr "Не вдалося опублікувати запит на вхід."
 
 msgid "The device does not support using IP and Access Code for connection."
 msgstr ""
+"Пристрій не підтримує підключення за допомогою IP-адреси та коду доступу."
 
 msgid "The printer has already been bound."
-msgstr ""
+msgstr "Принтер вже прив’язаний."
 
 msgid "The printer mode is incorrect, please switch to LAN Only."
 msgstr ""
+"Неправильний режим принтера, будь ласка, переключіться на режим лише LAN."
 
 msgid "Connecting to printer... The dialog will close later"
-msgstr ""
+msgstr "Підключення до принтера… Діалогове вікно закриється пізніше"
 
 msgid "Connection failed, please double check IP and Access Code"
 msgstr "З’єднання не вдалося, будь ласка, перевірте IP-адресу та доступний код"
@@ -8855,6 +8920,8 @@ msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Bambu Cool Plate SuperTack"
 msgstr ""
+"Температура платформи для початкового шару. Значення 0 означає, що філамент "
+"не підтримує друк на Bambu Cool Plate SuperTack"
 
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
@@ -8962,7 +9029,7 @@ msgstr ""
 "ступеня звису"
 
 msgid "Overhang threshold for participating cooling"
-msgstr ""
+msgstr "Поріг нависання для участі в охолодженні"
 
 #, c-format
 msgid ""
@@ -8971,6 +9038,10 @@ msgid ""
 "support from lower layer. 100% means forcing cooling for all outer wall no "
 "matter how much overhang degree"
 msgstr ""
+"Визначте, яка частина нависання приєднується до функції охолодження, щоб "
+"зменшити швидкість. Виражається у відсотках, що вказує, яка ширина лінії без "
+"підтримки з нижнього шару. 100 відсотків означає примусове охолодження для "
+"всіх зовнішніх стінок, незалежно від кута нависання"
 
 msgid "Bridge direction"
 msgstr "Напрямок мосту"
@@ -9058,7 +9129,7 @@ msgid "mm/s"
 msgstr "мм/с"
 
 msgid "over 100% wall (not bridge)"
-msgstr ""
+msgstr "стіна понад 100% (не міст)"
 
 #, c-format, boost-format
 msgid ""
@@ -9086,7 +9157,7 @@ msgstr ""
 "Auto означає, що ширина поля аналізується та обчислюється автоматично."
 
 msgid "Painted"
-msgstr ""
+msgstr "Пофарбовано"
 
 msgid "Brim-object gap"
 msgstr "Зазор між каймою та об'єктом"
@@ -9314,6 +9385,9 @@ msgid ""
 "Line pattern of internal solid infill. if the detect narrow internal solid "
 "infill be enabled, the concentric pattern will be used for the small area."
 msgstr ""
+"Шаблон ліній внутрішнього заповнення. Якщо вмикати виявлення вузького "
+"внутрішнього заповнення, для маленької ділянки буде використано "
+"концентричний шаблон."
 
 msgid "Line width of outer wall"
 msgstr "Ширина лінії зовнішньої стінки"
@@ -9576,7 +9650,7 @@ msgstr ""
 "важливий імає бути точним"
 
 msgid "Shrinkage"
-msgstr ""
+msgstr "Усадка"
 
 #, no-c-format, no-boost-format
 msgid ""
@@ -9586,6 +9660,11 @@ msgid ""
 "Be sure to allow enough space between objects, as this compensation is done "
 "after the checks."
 msgstr ""
+"Введіть відсоток усадки, який філамент отримає після охолодження (94%, якщо "
+"ви вимірюєте 94 мм замість 100 мм). Частина буде масштабована в площинах xy "
+"для компенсації. Враховується лише філамент, використаний для периметра.\n"
+"Переконайтеся, що між об’єктами достатньо простору, оскільки ця компенсація "
+"виконується після перевірок."
 
 msgid "Density"
 msgstr "Щільність"
@@ -9607,12 +9686,14 @@ msgid ""
 msgstr "Розчинний матеріал зазвичай використовується для друку підтримки"
 
 msgid "Scarf seam type"
-msgstr ""
+msgstr "Тип шва шарфа"
 
 msgid ""
 "Set scarf seam type for this filament. This setting could minimize seam "
 "visibiliy."
 msgstr ""
+"Встановіть тип шва шарфа для цього філамента. Це налаштування може зменшити "
+"видимість шва."
 
 msgid "Contour"
 msgstr "Контур"
@@ -9627,17 +9708,21 @@ msgid ""
 "This amount can be specified in millimeters or as a percentage of the "
 "current layer height."
 msgstr ""
+"Цю величину можна вказати в міліметрах або як відсоток від висоти поточного "
+"шару."
 
 msgid "mm/%"
-msgstr ""
+msgstr "мм/%"
 
 msgid "Scarf slope gap"
-msgstr ""
+msgstr "Зазор нахилу шарфа"
 
 msgid ""
 "In order to reduce the visiblity of the seam in closed loop, the inner wall "
 "and outer wall are shortened by a specified amount."
 msgstr ""
+"Щоб зменшити видимість шва в замкнутому контурі, внутрішня і зовнішня стіни "
+"скорочуються на вказану величину."
 
 msgid "Scarf length"
 msgstr "Довжина шарфа"
@@ -10164,11 +10249,13 @@ msgid "The distance between the lines of ironing"
 msgstr "Відстань між лініями розглажування"
 
 msgid "Ironing inset"
-msgstr ""
+msgstr "Вставка прасування"
 
 msgid ""
 "The distance to keep the from the edges of ironing line. 0 means not apply."
 msgstr ""
+"Відстань, яку потрібно зберігати від країв лінії прасування. 0 означає, що "
+"не застосовувати."
 
 msgid "Ironing speed"
 msgstr "Швидкість розглажування"
@@ -10420,16 +10507,16 @@ msgstr ""
 "швидкість. Для 100 відсоткового звису використовується швидкість моста."
 
 msgid "Smooth speed discontinuity area"
-msgstr ""
+msgstr "Згладити область дискретності швидкості"
 
 msgid "Add the speed transition between discontinuity area."
-msgstr ""
+msgstr "Додати перехід швидкості між областями дискретності."
 
 msgid "Smooth coefficient"
-msgstr ""
+msgstr "Коефіцієнт згладжування"
 
 msgid "The smaller the number, the longer the speed transition path."
-msgstr ""
+msgstr "Чим менше число, тим довший шлях переходу швидкості."
 
 msgid "Line width of inner wall"
 msgstr "Ширина лінії внутрішніх стінок"
@@ -10487,6 +10574,8 @@ msgid ""
 "Object will be raised by this number of support layers. Use this function to "
 "avoid warping when print ABS"
 msgstr ""
+"Об’єкт буде піднятий на цю кількість опорних шарів. Використовуйте цю "
+"функцію, щоб уникнути деформації при друку ABS"
 
 msgid ""
 "G-code path is generated after simplifying the contour of model to avoid too "
@@ -10715,13 +10804,17 @@ msgstr ""
 "За замовчуванням для цього параметра - 80%"
 
 msgid "Role base wipe speed"
-msgstr ""
+msgstr "Швидкість затирання на основі ролі"
 
 msgid ""
 "The wipe speed is determined by speed of current extrusion role. e.g if a "
 "wip action is executed immediately following an outer wall extrusion, the "
 "speed of the outer wall extrusion will be utilized for the wipe action."
 msgstr ""
+"Швидкість затирання визначається швидкістю поточної ролі екструзії. "
+"Наприклад, якщо дія затирання виконується відразу після екструзії зовнішньої "
+"стіни, швидкість екструзії зовнішньої стіни буде використана для дії "
+"затирання."
 
 msgid "Skirt distance"
 msgstr "Відстань між спідницею/каймою"
@@ -11117,7 +11210,7 @@ msgid ""
 msgstr "Буде створена опора для звисів з кутом нахилу нижче порога."
 
 msgid "Branch angle"
-msgstr ""
+msgstr "Кут гілки"
 
 msgid ""
 "This setting determines the maximum overhang angle that t he branches of "
@@ -11129,20 +11222,20 @@ msgstr ""
 "більшегоризонтально, дозволяючи їм досягати більшої відстані."
 
 msgid "Branch distance"
-msgstr ""
+msgstr "Відстань між гілками"
 
 msgid ""
 "This setting determines the distance between neighboring tree support nodes."
 msgstr "Цей параметр визначає відстань між сусідніми вузлами підтримки дерева."
 
 msgid "Branch diameter"
-msgstr ""
+msgstr "Діаметр гілки"
 
 msgid "This setting determines the initial diameter of support nodes."
 msgstr "Цей параметр визначає початковий діаметр опорних вузлів."
 
 msgid "Branch diameter angle"
-msgstr ""
+msgstr "Кут діаметра гілки"
 
 msgid ""
 "The angle of the branches' diameter as they gradually become thicker towards "
@@ -11150,6 +11243,9 @@ msgid ""
 "over their length. A bit of an angle can increase stability of the tree "
 "support."
 msgstr ""
+"Кут діаметра гілок, оскільки вони поступово стають товщими донизу. Кут 0 "
+"призведе до того, що гілки матимуть рівномірну товщину по всій довжині. "
+"Невеликий кут може підвищити стабільність підтримки дерева."
 
 msgid "Support wall loops"
 msgstr "Опорні стінові петлі"
@@ -11158,6 +11254,8 @@ msgid ""
 "This setting specifies the count of support walls in the range of [0,2]. 0 "
 "means auto."
 msgstr ""
+"Ця налаштування визначає кількість опорних стінок в діапазоні [0,2]. 0 "
+"означає автоматичний режим."
 
 msgid "Chamber temperature"
 msgstr "Температура в камері"
@@ -11837,6 +11935,24 @@ msgid ""
 "cause the result not exactly the same in each calibration. We are still "
 "investigating the root cause to do improvements with new updates."
 msgstr ""
+"Будь ласка, знайдіть деталі калібрування динаміки потоку на нашій Вікі.\n"
+"\n"
+"Зазвичай калібрування не є необхідним. Коли ви починаєте друк одним кольором/"
+"матеріалом з увімкненою опцією “калібрування динаміки потоку” в меню початку "
+"друку, принтер буде слідувати старому способу, калібруючи філамент перед "
+"друком. Коли ви починаєте друк багатокольоровим/матеріалом, принтер "
+"використовуватиме параметри компенсації за замовчуванням для філамента під "
+"час кожної зміни філамента, що зазвичай дає добрий результат.\n"
+"\n"
+"Зверніть увагу, що є кілька випадків, які можуть зробити результати "
+"калібрування ненадійними, такі як недостатня адгезія на робочій поверхні. "
+"Поліпшити адгезію можна, вимивши робочу поверхню або наносячи клей. Для "
+"отримання додаткової інформації з цього питання зверніться до нашої Вікі.\n"
+"\n"
+"Результати калібрування мають приблизно 10% нестабільності в наших тестах, "
+"що може призвести до того, що результати не будуть точно такими ж під час "
+"кожного калібрування. Ми все ще досліджуємо корінні причини, щоб внести "
+"поліпшення в нових оновленнях."
 
 msgid "When to use Flow Rate Calibration"
 msgstr "Коли використовувати калібрування рівня потоку"
@@ -11958,6 +12074,7 @@ msgid ""
 "*We recommend you to add brand, material, type, and even humidity level in "
 "the Name"
 msgstr ""
+"*Рекомендуємо додати бренд, матеріал, тип і навіть рівень вологості в назву"
 
 msgid "Failed"
 msgstr "Помилка"
@@ -12569,8 +12686,8 @@ msgstr ""
 "Чи бажаєте ви їх перезаписати?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more prinetrs, Please go to printer selection"
 msgstr ""
 "Ми перейменовуємо налаштування на “Виробник Тип Серійний номер @принтер, "
@@ -12791,10 +12908,10 @@ msgid "Printer Setting"
 msgstr "Налаштування принтера"
 
 msgid "Printer preset bundle(.bbscfg)"
-msgstr ""
+msgstr "Пакет пресетів принтера (.bbscfg)"
 
 msgid "Filament preset bundle(.bbsflmt)"
-msgstr ""
+msgstr "Пакет пресетів філамента (.bbsflmt)"
 
 msgid "Printer presets(.zip)"
 msgstr "Налаштування принтера (.zip)"
@@ -13438,22 +13555,36 @@ msgid ""
 "adhesion strength. To get better results, please refer to this wiki: "
 "Printing Tips for High Temp / Engineering materials."
 msgstr ""
+"При друкуванні з цього філамента існує ризик деформації та низької адгезії "
+"між шарами. Щоб отримати кращі результати, будь ласка, ознайомтеся з цією "
+"вікі: Поради з друку для матеріалів високої температури / інженерних "
+"матеріалів."
 
 msgid ""
 "When printing this filament, there's a risk of nozzle clogging, oozing, "
 "warping and low layer adhesion strength. To get better results, please refer "
 "to this wiki: Printing Tips for High Temp / Engineering materials."
 msgstr ""
+"При друкуванні з цього філамента існує ризик забивання сопла, витікання, "
+"деформації та низької адгезії між шарами. Щоб отримати кращі результати, "
+"будь ласка, ознайомтеся з цією вікі: Поради з друку для матеріалів високої "
+"температури / інженерних матеріалів."
 
 msgid ""
 "To get better transparent or translucent results with the corresponding "
 "filament, please refer to this wiki: Printing tips for transparent PETG."
 msgstr ""
+"Щоб отримати кращі прозорі або напівпрозорі результати з відповідним "
+"філаментом, будь ласка, ознайомтеся з цією вікі: Поради з друку для "
+"прозорого PETG."
 
 msgid ""
 "To make the prints get higher gloss, please dry the filament before use, and "
 "set the outer wall speed to be 40 to 60 mm/s when slicing."
 msgstr ""
+"Щоб надати друкам вищий блиск, будь ласка, просушіть філамент перед "
+"використанням і встановіть швидкість зовнішньої стіни на 40-60 мм/с під час "
+"нарізання."
 
 msgid ""
 "This filament is only used to print models with a low density usually, and "
@@ -13461,24 +13592,38 @@ msgid ""
 "refer to this wiki: Instructions for printing RC model with foaming PLA (PLA "
 "Aero)."
 msgstr ""
+"Цей філамент зазвичай використовується лише для друку моделей з низькою "
+"щільністю, і для нього потрібні деякі спеціальні параметри. Щоб отримати "
+"кращу якість друку, будь ласка, ознайомтеся з цією вікі: Інструкції з друку "
+"RC моделей з пінопласту PLA (PLA Aero)."
 
 msgid ""
 "This filament is only used to print models with a low density usually, and "
 "some special parameters are required. To get better printing quality, please "
 "refer to this wiki: ASA Aero Printing Guide."
 msgstr ""
+"Цей філамент зазвичай використовується лише для друку моделей з низькою "
+"щільністю, і для нього потрібні деякі спеціальні параметри. Щоб отримати "
+"кращу якість друку, будь ласка, ознайомтеся з цією вікі: Посібник з друку "
+"ASA Aero."
 
 msgid ""
 "This filament is too soft and not compatible with the AMS. Printing it is of "
 "many requirements, and to get better printing quality, please refer to this "
 "wiki: TPU printing guide."
 msgstr ""
+"Цей філамент занадто м’який і не сумісний з AMS. Друк з нього має багато "
+"вимог, і для отримання кращої якості друку, будь ласка, ознайомтеся з цією "
+"вікі: Посібник з друку TPU."
 
 msgid ""
 "This filament has high enough hardness (about 67D)  and is compatible with "
 "the AMS. Printing it is of many requirements, and to get better printing "
 "quality, please refer to this wiki: TPU printing guide."
 msgstr ""
+"Цей філамент має достатню твердість (приблизно 67D) і сумісний з AMS. Друк з "
+"нього має багато вимог, і для отримання кращої якості друку, будь ласка, "
+"ознайомтеся з цією вікі: Посібник з друку TPU."
 
 msgid ""
 "If you are to print a kind of soft TPU, please don't slice with this "
@@ -13486,6 +13631,10 @@ msgid ""
 "55D) and is compatible with the AMS. To get better printing quality, please "
 "refer to this wiki: TPU printing guide."
 msgstr ""
+"Якщо ви збираєтеся друкувати м’який TPU, будь ласка, не нарізайте його з цим "
+"профілем; цей профіль призначений лише для TPU з достатньою твердістю (не "
+"менше 55D) і сумісного з AMS. Щоб отримати кращу якість друку, будь ласка, "
+"ознайомтеся з цією вікі: Посібник з друку TPU."
 
 msgid ""
 "This is a water-soluble support filament, and usually it is only for the "
@@ -13493,6 +13642,10 @@ msgid ""
 "many requirements, and to get better printing quality, please refer to this "
 "wiki: PVA Printing Guide."
 msgstr ""
+"Це філамент, що розчиняється у воді, і зазвичай він призначений лише для "
+"підтримуючої структури, а не для тіла моделі. Друк з цього філамента має "
+"багато вимог, і для отримання кращої якості друку, будь ласка, ознайомтеся з "
+"цією вікі: Посібник з друку PVA."
 
 msgid ""
 "This is a non-water-soluble support filament, and usually it is only for the "
@@ -13500,21 +13653,29 @@ msgid ""
 "quality, please refer to this wiki: Printing Tips for Support Filament and "
 "Support Function."
 msgstr ""
+"Це філамент для підтримки, що не розчиняється у воді, і зазвичай він "
+"призначений лише для підтримуючої структури, а не для тіла моделі. Щоб "
+"отримати кращу якість друку, будь ласка, ознайомтеся з цією вікі: Поради з "
+"друку для філамента підтримки та функції підтримки."
 
 msgid ""
 "The generic presets are conservatively tuned for compatibility with a wider "
 "range of filaments. For higher printing quality and speeds, please use Bambu "
 "filaments with Bambu presets."
 msgstr ""
+"Загальні пресети налаштовані консервативно для сумісності з більш широким "
+"спектром філаментів. Для досягнення вищої якості друку та швидкості, будь "
+"ласка, використовуйте філаменти Bambu з пресетами Bambu."
 
 msgid "No AMS"
 msgstr "Немає AMS"
 
 msgid "There is no device available to send printing."
-msgstr ""
+msgstr "Пристрій для відправки друку недоступний."
 
 msgid "The number of printers in use simultaneously cannot be equal to 0."
 msgstr ""
+"Кількість принтерів, що використовуються одночасно, не може дорівнювати 0."
 
 msgid "Use External Spool"
 msgstr "Використовуйте зовнішню катушку"
@@ -13537,6 +13698,7 @@ msgstr "Статус AMS"
 msgid ""
 "Please select the devices you would like to manage here (up to 6 devices)"
 msgstr ""
+"Будь ласка, виберіть пристрої, які ви хочете керувати тут (до 6 пристроїв)."
 
 msgid "Printing Options"
 msgstr "Параметри друку"
@@ -13567,24 +13729,24 @@ msgid "Task Sent"
 msgstr "Завдання надіслане"
 
 msgid "Edit multiple printers"
-msgstr ""
+msgstr "Редагувати кілька принтерів"
 
 msgid "Select connected printers (0/6)"
-msgstr ""
+msgstr "Виберіть підключені принтери (0/6)"
 
 #, c-format, boost-format
 msgid "Select Connected Printers (%d/6)"
-msgstr ""
+msgstr "Виберіть підключені принтери (%d/6)"
 
 #, c-format, boost-format
 msgid "The maximum number of printers that can be selected is %d"
-msgstr ""
+msgstr "Максимальна кількість принтерів, яку можна вибрати, становить %d"
 
 msgid "No task"
 msgstr "Немає завдань"
 
 msgid "Edit Printers"
-msgstr ""
+msgstr "Редагувати принтери"
 
 msgid "Task Name"
 msgstr "Назва завдання"
@@ -13605,43 +13767,43 @@ msgid "No historical tasks!"
 msgstr "Історичних завдань немає!"
 
 msgid "Upgrading"
-msgstr ""
+msgstr "Оновлення"
 
 msgid "syncing"
-msgstr ""
+msgstr "синхронізація"
 
 msgid "Printing Finish"
-msgstr ""
+msgstr "Друк завершено"
 
 msgid "Printing Failed"
-msgstr ""
+msgstr "Друк не вдався"
 
 msgid "Printing Pause"
-msgstr ""
+msgstr "Друк призупинено"
 
 msgid "Pending"
-msgstr ""
+msgstr "В очікуванні"
 
 msgid "Sending"
-msgstr "Sending"
+msgstr "Відправлення"
 
 msgid "Sending Finish"
-msgstr ""
+msgstr "Відправлення завершено"
 
 msgid "Sending Cancel"
-msgstr ""
+msgstr "Відправлення скасовано"
 
 msgid "Sending Failed"
-msgstr ""
+msgstr "Відправка не вдалася"
 
 msgid "Print Success"
-msgstr ""
+msgstr "Друк успішно завершено"
 
 msgid "Print Failed"
-msgstr ""
+msgstr "Друк не вдався"
 
 msgid "Removed"
-msgstr ""
+msgstr "Видалено"
 
 #: resources/data/hints.ini: [hint:How to use keyboard shortcuts]
 msgid ""
diff --git a/linux.d/debian b/linux.d/debian
index a366971860..071fcb164d 100644
--- a/linux.d/debian
+++ b/linux.d/debian
@@ -36,10 +36,10 @@ if [[ -n "$UPDATE_LIB" ]]
 then
     # for ubuntu 22+ and 23+:
     ubu_major_version="$(grep VERSION_ID /etc/os-release | cut -d "=" -f 2 | cut -d "." -f 1 | tr -d /\"/)"
-    if [ $ubu_major_version == "22" ] || [ $ubu_major_version == "23" ]
+    if [ $ubu_major_version = "22" ] || [ $ubu_major_version = "23" ]
     then
         REQUIRED_DEV_PACKAGES+=(libwebkit2gtk-4.0-dev curl libfuse-dev libssl-dev libcurl4-openssl-dev m4)
-    elif [ $ubu_major_version == "24" ]
+    elif [ $ubu_major_version = "24" ]
     then
         REQUIRED_DEV_PACKAGES+=(libwebkit2gtk-4.1-dev)
     else
@@ -59,4 +59,4 @@ then
     exit 0
 fi
 
-FOUND_GTK3_DEV=$(dpkg -l libgtk* | grep gtk-3-dev || echo '')
\ No newline at end of file
+FOUND_GTK3_DEV=$(dpkg -l libgtk* | grep gtk-3-dev || echo '')
diff --git a/resources/profiles/Qidi.json b/resources/profiles/Qidi.json
index 6de89ee1bc..3f1b5f0665 100644
--- a/resources/profiles/Qidi.json
+++ b/resources/profiles/Qidi.json
@@ -1,9 +1,13 @@
 {
     "name": "Qidi",
-    "version": "01.10.00.01",
+    "version": "01.10.00.02",
     "force_update": "0",
     "description": "Qidi configurations",
     "machine_model_list": [
+        {
+            "name": "Qidi X-Plus 4",
+            "sub_path": "machine/Qidi X-Plus 4.json"
+        },
         {
             "name": "Qidi Q1 Pro",
             "sub_path": "machine/Qidi Q1 Pro.json"
@@ -20,15 +24,15 @@
             "name": "Qidi X-Smart 3",
             "sub_path": "machine/Qidi X-Smart 3.json"
         },
-        {
+		{
             "name": "Qidi X-Plus",
             "sub_path": "machine/Qidi X-Plus.json"
         },
-        {
+		{
             "name": "Qidi X-Max",
             "sub_path": "machine/Qidi X-Max.json"
         },
-        {
+	    {
             "name": "Qidi X-CF Pro",
             "sub_path": "machine/Qidi X-CF Pro.json"
         }
@@ -110,15 +114,15 @@
             "name": "0.12mm Fine @Qidi X3",
             "sub_path": "process/0.12mm Fine @Qidi X3.json"
         },
-        {
+		{
             "name": "0.12mm Fine @Qidi XMPlus",
             "sub_path": "process/0.12mm Fine @Qidi XPlus.json"
         },
-        {
+		{
             "name": "0.12mm Fine @Qidi XMax",
             "sub_path": "process/0.12mm Fine @Qidi XMax.json"
         },
-        {
+		{
             "name": "0.12mm Fine @Qidi XCFPro",
             "sub_path": "process/0.12mm Fine @Qidi XCFPro.json"
         },
@@ -139,18 +143,22 @@
             "sub_path": "process/0.12mm Fine @Qidi Q1 Pro.json"
         },
         {
-            "name": "0.16mm Optimal @Qidi X3",
-            "sub_path": "process/0.16mm Optimal @Qidi X3.json"
+            "name": "0.12mm Fine @Qidi XPlus4",
+            "sub_path": "process/0.12mm Fine @Qidi XPlus4.json"
         },
         {
+            "name": "0.16mm Optimal @Qidi X3",
+            "sub_path": "process/0.16mm Optimal @Qidi X3.json"
+        }, 
+		{
             "name": "0.16mm Optimal @Qidi XPlus",
             "sub_path": "process/0.16mm Optimal @Qidi XPlus.json"
         },
-        {
+		{
             "name": "0.16mm Optimal @Qidi XMax",
             "sub_path": "process/0.16mm Optimal @Qidi XMax.json"
         },
-        {
+		{
             "name": "0.16mm Optimal @Qidi XCFPro",
             "sub_path": "process/0.16mm Optimal @Qidi XCFPro.json"
         },
@@ -170,19 +178,23 @@
             "name": "0.16mm Optimal @Qidi Q1 Pro",
             "sub_path": "process/0.16mm Optimal @Qidi Q1 Pro.json"
         },
+        {
+            "name": "0.16mm Optimal @Qidi XPlus4",
+            "sub_path": "process/0.16mm Optimal @Qidi XPlus4.json"
+        },
         {
             "name": "0.20mm Standard @Qidi X3",
             "sub_path": "process/0.20mm Standard @Qidi X3.json"
         },
-        {
+		{
             "name": "0.20mm Standard @Qidi XPlus",
             "sub_path": "process/0.20mm Standard @Qidi XPlus.json"
         },
-        {
+		{
             "name": "0.20mm Standard @Qidi XMax",
             "sub_path": "process/0.20mm Standard @Qidi XMax.json"
         },
-        {
+		{
             "name": "0.20mm Standard @Qidi XCFPro",
             "sub_path": "process/0.20mm Standard @Qidi XCFPro.json"
         },
@@ -202,19 +214,23 @@
             "name": "0.20mm Standard @Qidi Q1 Pro",
             "sub_path": "process/0.20mm Standard @Qidi Q1 Pro.json"
         },
+        {
+            "name": "0.20mm Standard @Qidi XPlus4",
+            "sub_path": "process/0.20mm Standard @Qidi XPlus4.json"
+        },
         {
             "name": "0.24mm Draft @Qidi X3",
             "sub_path": "process/0.24mm Draft @Qidi X3.json"
         },
-        {
+		{
             "name": "0.25mm Draft @Qidi XPlus",
             "sub_path": "process/0.25mm Draft @Qidi XPlus.json"
         },
-        {
+		{
             "name": "0.25mm Draft @Qidi XMax",
             "sub_path": "process/0.25mm Draft @Qidi XMax.json"
         },
-        {
+		{
             "name": "0.25mm Draft @Qidi XCFPro",
             "sub_path": "process/0.25mm Draft @Qidi XCFPro.json"
         },
@@ -234,19 +250,23 @@
             "name": "0.24mm Draft @Qidi Q1 Pro",
             "sub_path": "process/0.24mm Draft @Qidi Q1 Pro.json"
         },
+        {
+            "name": "0.24mm Draft @Qidi XPlus4",
+            "sub_path": "process/0.24mm Draft @Qidi XPlus4.json"
+        },
         {
             "name": "0.28mm Extra Draft @Qidi X3",
             "sub_path": "process/0.28mm Extra Draft @Qidi X3.json"
         },
-        {
+		{
             "name": "0.30mm Extra Draft @Qidi XPlus",
             "sub_path": "process/0.30mm Extra Draft @Qidi XPlus.json"
         },
-        {
+		{
             "name": "0.30mm Extra Draft @Qidi XMax",
             "sub_path": "process/0.30mm Extra Draft @Qidi XMax.json"
         },
-        {
+		{
             "name": "0.30mm Extra Draft @Qidi XCFPro",
             "sub_path": "process/0.30mm Extra Draft @Qidi XCFPro.json"
         },
@@ -266,6 +286,30 @@
             "name": "0.28mm Extra Draft @Qidi Q1 Pro",
             "sub_path": "process/0.28mm Extra Draft @Qidi Q1 Pro.json"
         },
+        {
+            "name": "0.28mm Extra Draft @Qidi XPlus4",
+            "sub_path": "process/0.28mm Extra Draft @Qidi XPlus4.json"
+        },
+        {
+            "name": "0.06mm Standard @Qidi XPlus4 0.2 nozzle",
+            "sub_path": "process/0.06mm Standard @Qidi XPlus4 0.2 nozzle.json"
+        },
+        {
+            "name": "0.08mm Standard @Qidi XPlus4 0.2 nozzle",
+            "sub_path": "process/0.08mm Standard @Qidi XPlus4 0.2 nozzle.json"
+        },
+        {
+            "name": "0.10mm Standard @Qidi XPlus4 0.2 nozzle",
+            "sub_path": "process/0.10mm Standard @Qidi XPlus4 0.2 nozzle.json"
+        },
+        {
+            "name": "0.12mm Standard @Qidi XPlus4 0.2 nozzle",
+            "sub_path": "process/0.12mm Standard @Qidi XPlus4 0.2 nozzle.json"
+        },
+        {
+            "name": "0.14mm Standard @Qidi XPlus4 0.2 nozzle",
+            "sub_path": "process/0.14mm Standard @Qidi XPlus4 0.2 nozzle.json"
+        },
         {
             "name": "0.06mm Standard @Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "process/0.06mm Standard @Qidi Q1 Pro 0.2 nozzle.json"
@@ -346,6 +390,26 @@
             "name": "0.14mm Standard @Qidi XSmart3 0.2 nozzle",
             "sub_path": "process/0.14mm Standard @Qidi XSmart3 0.2 nozzle.json"
         },
+        {
+            "name": "0.18mm Standard @Qidi XPlus4 0.6 nozzle",
+            "sub_path": "process/0.18mm Standard @Qidi XPlus4 0.6 nozzle.json"
+        },
+        {
+            "name": "0.24mm Standard @Qidi XPlus4 0.6 nozzle",
+            "sub_path": "process/0.24mm Standard @Qidi XPlus4 0.6 nozzle.json"
+        },
+        {
+            "name": "0.30mm Standard @Qidi XPlus4 0.6 nozzle",
+            "sub_path": "process/0.30mm Standard @Qidi XPlus4 0.6 nozzle.json"
+        },
+        {
+            "name": "0.36mm Standard @Qidi XPlus4 0.6 nozzle",
+            "sub_path": "process/0.36mm Standard @Qidi XPlus4 0.6 nozzle.json"
+        },
+        {
+            "name": "0.42mm Standard @Qidi XPlus4 0.6 nozzle",
+            "sub_path": "process/0.42mm Standard @Qidi XPlus4 0.6 nozzle.json"
+        },
         {
             "name": "0.18mm Standard @Qidi Q1 Pro 0.6 nozzle",
             "sub_path": "process/0.18mm Standard @Qidi Q1 Pro 0.6 nozzle.json"
@@ -426,6 +490,26 @@
             "name": "0.42mm Standard @Qidi XSmart3 0.6 nozzle",
             "sub_path": "process/0.42mm Standard @Qidi XSmart3 0.6 nozzle.json"
         },
+        {
+            "name": "0.24mm Standard @Qidi XPlus4 0.8 nozzle",
+            "sub_path": "process/0.24mm Standard @Qidi XPlus4 0.8 nozzle.json"
+        },
+        {
+            "name": "0.32mm Standard @Qidi XPlus4 0.8 nozzle",
+            "sub_path": "process/0.32mm Standard @Qidi XPlus4 0.8 nozzle.json"
+        },
+        {
+            "name": "0.40mm Standard @Qidi XPlus4 0.8 nozzle",
+            "sub_path": "process/0.40mm Standard @Qidi XPlus4 0.8 nozzle.json"
+        },
+        {
+            "name": "0.48mm Standard @Qidi XPlus4 0.8 nozzle",
+            "sub_path": "process/0.48mm Standard @Qidi XPlus4 0.8 nozzle.json"
+        },
+        {
+            "name": "0.56mm Standard @Qidi XPlus4 0.8 nozzle",
+            "sub_path": "process/0.56mm Standard @Qidi XPlus4 0.8 nozzle.json"
+        },
         {
             "name": "0.24mm Standard @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "process/0.24mm Standard @Qidi Q1 Pro 0.8 nozzle.json"
@@ -524,7 +608,7 @@
             "name": "fdm_filament_pa",
             "sub_path": "filament/fdm_filament_pa.json"
         },
-        {
+	{
             "name": "fdm_filament_pc",
             "sub_path": "filament/fdm_filament_pc.json"
         },
@@ -532,11 +616,11 @@
             "name": "fdm_filament_pet",
             "sub_path": "filament/fdm_filament_pet.json"
         },
-        {
+	{
             "name": "fdm_filament_pla",
             "sub_path": "filament/fdm_filament_pla.json"
         },
-        {
+	{
             "name": "fdm_filament_pva",
             "sub_path": "filament/fdm_filament_pva.json"
         },
@@ -568,6 +652,30 @@
             "name": "Generic ABS @Qidi 0.2 nozzle",
             "sub_path": "filament/Generic ABS @Qidi 0.2 nozzle.json"
         },
+        {
+            "name": "Generic ABS @Qidi 0.6 nozzle",
+            "sub_path": "filament/Generic ABS @Qidi 0.6 nozzle.json"
+        },
+        {
+            "name": "Generic ABS @Qidi 0.8 nozzle",
+            "sub_path": "filament/Generic ABS @Qidi 0.8 nozzle.json"
+        },
+        {
+            "name": "Generic ABS @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/Generic ABS @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "Generic ABS @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/Generic ABS @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "Generic ABS @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/Generic ABS @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "Generic ABS @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/Generic ABS @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "Generic PETG @Qidi",
             "sub_path": "filament/Generic PETG @Qidi.json"
@@ -592,6 +700,22 @@
             "name": "Generic PETG @Qidi 0.2 nozzle",
             "sub_path": "filament/Generic PETG @Qidi 0.2 nozzle.json"
         },
+        {
+            "name": "Generic PETG @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/Generic PETG @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "Generic PETG @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/Generic PETG @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "Generic PETG @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/Generic PETG @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "Generic PETG @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/Generic PETG @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "Generic PLA @Qidi",
             "sub_path": "filament/Generic PLA @Qidi.json"
@@ -616,6 +740,30 @@
             "name": "Generic PLA @Qidi 0.2 nozzle",
             "sub_path": "filament/Generic PLA @Qidi 0.2 nozzle.json"
         },
+        {
+            "name": "Generic PLA @Qidi 0.6 nozzle",
+            "sub_path": "filament/Generic PLA @Qidi 0.6 nozzle.json"
+        },
+        {
+            "name": "Generic PLA @Qidi 0.8 nozzle",
+            "sub_path": "filament/Generic PLA @Qidi 0.8 nozzle.json"
+        },
+        {
+            "name": "Generic PLA @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/Generic PLA @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "Generic PLA @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/Generic PLA @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "Generic PLA @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/Generic PLA @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "Generic PLA @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/Generic PLA @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI ABS Odorless @Qidi",
             "sub_path": "filament/QIDI ABS Odorless @Qidi.json"
@@ -636,10 +784,30 @@
             "name": "QIDI ABS Odorless @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "filament/QIDI ABS Odorless @Qidi Q1 Pro 0.8 nozzle.json"
         },
+        {
+            "name": "QIDI ABS Odorless @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/QIDI ABS Odorless @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Odorless @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI ABS Odorless @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Odorless @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI ABS Odorless @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Odorless @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI ABS Odorless @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI ABS Odorless @Qidi 0.2 nozzle",
             "sub_path": "filament/QIDI ABS Odorless @Qidi 0.2 nozzle.json"
         },
+        {
+            "name": "QIDI ABS Odorless @Qidi 0.6 nozzle",
+            "sub_path": "filament/QIDI ABS Odorless @Qidi 0.6 nozzle.json"
+        },
         {
             "name": "QIDI ABS Odorless @Qidi 0.8 nozzle",
             "sub_path": "filament/QIDI ABS Odorless @Qidi 0.8 nozzle.json"
@@ -664,14 +832,82 @@
             "name": "QIDI ABS Rapido @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "filament/QIDI ABS Rapido @Qidi Q1 Pro 0.8 nozzle.json"
         },
+        {
+            "name": "QIDI ABS Rapido @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI ABS Rapido @Qidi 0.2 nozzle",
             "sub_path": "filament/QIDI ABS Rapido @Qidi 0.2 nozzle.json"
         },
+        {
+            "name": "QIDI ABS Rapido @Qidi 0.6 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido @Qidi 0.6 nozzle.json"
+        },
         {
             "name": "QIDI ABS Rapido @Qidi 0.8 nozzle",
             "sub_path": "filament/QIDI ABS Rapido @Qidi 0.8 nozzle.json"
         },
+        {
+            "name": "QIDI ABS Rapido Metal @Qidi",
+            "sub_path": "filament/QIDI ABS Rapido Metal @Qidi.json"
+        },
+        {
+            "name": "QIDI ABS Rapido Metal @Qidi Q1 Pro 0.2 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido Metal @Qidi Q1 Pro 0.4 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido Metal @Qidi Q1 Pro 0.6 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido Metal @Qidi Q1 Pro 0.8 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido Metal @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido Metal @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido Metal @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido Metal @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido Metal @Qidi 0.2 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido Metal @Qidi 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido Metal @Qidi 0.6 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido Metal @Qidi 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS Rapido Metal @Qidi 0.8 nozzle",
+            "sub_path": "filament/QIDI ABS Rapido Metal @Qidi 0.8 nozzle.json"
+        },
         {
             "name": "QIDI ABS-GF25 @Qidi",
             "sub_path": "filament/QIDI ABS-GF25 @Qidi.json"
@@ -708,10 +944,34 @@
             "name": "QIDI ASA @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "filament/QIDI ASA @Qidi Q1 Pro 0.8 nozzle.json"
         },
+        {
+            "name": "QIDI ASA @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/QIDI ASA @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI ASA @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI ASA @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI ASA @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI ASA @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI ASA @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI ASA @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI ASA @Qidi 0.2 nozzle",
             "sub_path": "filament/QIDI ASA @Qidi 0.2 nozzle.json"
         },
+        {
+            "name": "QIDI ASA @Qidi 0.6 nozzle",
+            "sub_path": "filament/QIDI ASA @Qidi 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI ASA @Qidi 0.8 nozzle",
+            "sub_path": "filament/QIDI ASA @Qidi 0.8 nozzle.json"
+        },
         {
             "name": "QIDI ASA-Aero @Qidi",
             "sub_path": "filament/QIDI ASA-Aero @Qidi.json"
@@ -720,6 +980,10 @@
             "name": "QIDI ASA-Aero @Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "filament/QIDI ASA-Aero @Qidi Q1 Pro 0.4 nozzle.json"
         },
+        {
+            "name": "QIDI ASA-Aero @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI ASA-Aero @Qidi X-Plus 4 0.4 nozzle.json"
+        },
         {
             "name": "QIDI PAHT-CF @Qidi",
             "sub_path": "filament/QIDI PAHT-CF @Qidi.json"
@@ -736,6 +1000,18 @@
             "name": "QIDI PAHT-CF @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "filament/QIDI PAHT-CF @Qidi Q1 Pro 0.8 nozzle.json"
         },
+        {
+            "name": "QIDI PAHT-CF @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PAHT-CF @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PAHT-CF @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PAHT-CF @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PAHT-CF @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PAHT-CF @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI PET-CF @Qidi",
             "sub_path": "filament/QIDI PET-CF @Qidi.json"
@@ -752,10 +1028,26 @@
             "name": "QIDI PET-CF @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "filament/QIDI PET-CF @Qidi Q1 Pro 0.8 nozzle.json"
         },
+        {
+            "name": "QIDI PET-CF @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PET-CF @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PET-CF @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PET-CF @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PET-CF @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PET-CF @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI PETG Tough @Qidi",
             "sub_path": "filament/QIDI PETG Tough @Qidi.json"
         },
+        {
+            "name": "QIDI PETG Tough @Qidi 0.2 nozzle",
+            "sub_path": "filament/QIDI PETG Tough @Qidi 0.2 nozzle.json"
+        },
         {
             "name": "QIDI PETG Tough @Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "filament/QIDI PETG Tough @Qidi Q1 Pro 0.2 nozzle.json"
@@ -772,10 +1064,38 @@
             "name": "QIDI PETG Tough @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "filament/QIDI PETG Tough @Qidi Q1 Pro 0.8 nozzle.json"
         },
+        {
+            "name": "QIDI PETG Tough @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/QIDI PETG Tough @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI PETG Tough @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PETG Tough @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PETG Tough @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PETG Tough @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PETG Tough @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PETG Tough @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI PLA Rapido @Qidi",
             "sub_path": "filament/QIDI PLA Rapido @Qidi.json"
         },
+        {
+            "name": "QIDI PLA Rapido @Qidi 0.2 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido @Qidi 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido @Qidi 0.6 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido @Qidi 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido @Qidi 0.8 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido @Qidi 0.8 nozzle.json"
+        },
         {
             "name": "QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "filament/QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle.json"
@@ -792,10 +1112,38 @@
             "name": "QIDI PLA Rapido @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "filament/QIDI PLA Rapido @Qidi Q1 Pro 0.8 nozzle.json"
         },
+        {
+            "name": "QIDI PLA Rapido @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI PLA Rapido Matte @Qidi",
             "sub_path": "filament/QIDI PLA Rapido Matte @Qidi.json"
         },
+        {
+            "name": "QIDI PLA Rapido Matte @Qidi 0.2 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Matte @Qidi 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Matte @Qidi 0.6 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Matte @Qidi 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Matte @Qidi 0.8 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Matte @Qidi 0.8 nozzle.json"
+        },
         {
             "name": "QIDI PLA Rapido Matte @Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.2 nozzle.json"
@@ -812,6 +1160,94 @@
             "name": "QIDI PLA Rapido Matte @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.8 nozzle.json"
         },
+        {
+            "name": "QIDI PLA Rapido Matte @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Matte @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Matte @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Matte @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Metal @Qidi",
+            "sub_path": "filament/QIDI PLA Rapido Metal @Qidi.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Metal @Qidi 0.2 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Metal @Qidi 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Metal @Qidi 0.6 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Metal @Qidi 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Metal @Qidi 0.8 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Metal @Qidi 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Metal @Qidi Q1 Pro 0.2 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Metal @Qidi Q1 Pro 0.4 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Metal @Qidi Q1 Pro 0.6 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Metal @Qidi Q1 Pro 0.8 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Metal @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Metal @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Metal @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Metal @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Silk @Qidi",
+            "sub_path": "filament/QIDI PLA Rapido Silk @Qidi.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Silk @Qidi 0.6 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Silk @Qidi 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Silk @Qidi Q1 Pro 0.4 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Silk @Qidi Q1 Pro 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Silk @Qidi Q1 Pro 0.6 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Silk @Qidi Q1 Pro 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Silk @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Silk @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA Rapido Silk @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PLA Rapido Silk @Qidi X-Plus 4 0.6 nozzle.json"
+        },
         {
             "name": "QIDI PLA-CF @Qidi",
             "sub_path": "filament/QIDI PLA-CF @Qidi.json"
@@ -828,6 +1264,18 @@
             "name": "QIDI PLA-CF @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "filament/QIDI PLA-CF @Qidi Q1 Pro 0.8 nozzle.json"
         },
+        {
+            "name": "QIDI PLA-CF @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PLA-CF @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA-CF @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PLA-CF @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PLA-CF @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PLA-CF @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI PLA-CF @Qidi 0.6 nozzle",
             "sub_path": "filament/QIDI PLA-CF @Qidi 0.6 nozzle.json"
@@ -852,6 +1300,18 @@
             "name": "QIDI PA-Ultra @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "filament/QIDI PA-Ultra @Qidi Q1 Pro 0.8 nozzle.json"
         },
+        {
+            "name": "QIDI PA-Ultra @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PA-Ultra @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PA-Ultra @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PA-Ultra @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PA-Ultra @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PA-Ultra @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "QIDI ABS-GF10 @Qidi",
             "sub_path": "filament/QIDI ABS-GF10 @Qidi.json"
@@ -900,11 +1360,27 @@
             "name": "Generic ASA @Qidi 0.2 nozzle",
             "sub_path": "filament/Generic ASA @Qidi 0.2 nozzle.json"
         },
+        {
+            "name": "Generic ASA @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/Generic ASA @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "Generic ASA @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/Generic ASA @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "Generic ASA @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/Generic ASA @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "Generic ASA @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/Generic ASA @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "Generic PA @Qidi",
             "sub_path": "filament/Generic PA @Qidi.json"
         },
-        {
+		{
             "name": "Generic PA-CF @Qidi",
             "sub_path": "filament/Generic PA-CF @Qidi.json"
         },
@@ -912,7 +1388,7 @@
             "name": "Generic PC @Qidi",
             "sub_path": "filament/Generic PC @Qidi.json"
         },
-        {
+		{
             "name": "Generic PETG-CF @Qidi",
             "sub_path": "filament/Generic PETG-CF @Qidi.json"
         },
@@ -920,6 +1396,54 @@
             "name": "Generic PLA Silk @Qidi",
             "sub_path": "filament/Generic PLA Silk @Qidi.json"
         },
+        {
+            "name": "Generic PLA Silk @Qidi 0.2 nozzle",
+            "sub_path": "filament/Generic PLA Silk @Qidi 0.2 nozzle.json"
+        },
+        {
+            "name": "Generic PLA Silk @Qidi 0.4 nozzle",
+            "sub_path": "filament/Generic PLA Silk @Qidi 0.4 nozzle.json"
+        },
+        {
+            "name": "Generic PLA Silk @Qidi 0.6 nozzle",
+            "sub_path": "filament/Generic PLA Silk @Qidi 0.6 nozzle.json"
+        },
+        {
+            "name": "Generic PLA Silk @Qidi 0.8 nozzle",
+            "sub_path": "filament/Generic PLA Silk @Qidi 0.8 nozzle.json"
+        },
+        {
+            "name": "Generic PLA Silk @Qidi Q1 Pro 0.2 nozzle",
+            "sub_path": "filament/Generic PLA Silk @Qidi Q1 Pro 0.2 nozzle.json"
+        },
+        {
+            "name": "Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle",
+            "sub_path": "filament/Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle.json"
+        },
+        {
+            "name": "Generic PLA Silk @Qidi Q1 Pro 0.6 nozzle",
+            "sub_path": "filament/Generic PLA Silk @Qidi Q1 Pro 0.6 nozzle.json"
+        },
+        {
+            "name": "Generic PLA Silk @Qidi Q1 Pro 0.8 nozzle",
+            "sub_path": "filament/Generic PLA Silk @Qidi Q1 Pro 0.8 nozzle.json"
+        },
+        {
+            "name": "Generic PLA Silk @Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "filament/Generic PLA Silk @Qidi X-Plus 4 0.2 nozzle.json"
+        },
+        {
+            "name": "Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "Generic PLA Silk @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/Generic PLA Silk @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "Generic PLA Silk @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/Generic PLA Silk @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "Generic PVA @Qidi",
             "sub_path": "filament/Generic PVA @Qidi.json"
@@ -940,6 +1464,18 @@
             "name": "QIDI ABS-GF @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "filament/QIDI ABS-GF @Qidi Q1 Pro 0.8 nozzle.json"
         },
+        {
+            "name": "QIDI ABS-GF @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI ABS-GF @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS-GF @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI ABS-GF @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI ABS-GF @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI ABS-GF @Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "Generic PLA-CF @Qidi",
             "sub_path": "filament/Generic PLA-CF @Qidi.json"
@@ -955,6 +1491,42 @@
         {
             "name": "QIDI TPU 95A-HF @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "filament/QIDI TPU 95A-HF @Qidi Q1 Pro 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI PPS-CF @Qidi",
+            "sub_path": "filament/QIDI PPS-CF @Qidi.json"
+        },
+        {
+            "name": "QIDI PPS-CF @Qidi 0.6 nozzle",
+            "sub_path": "filament/QIDI PPS-CF @Qidi 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PPS-CF @Qidi 0.8 nozzle",
+            "sub_path": "filament/QIDI PPS-CF @Qidi 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI PPS-CF @Qidi Q1 Pro 0.4 nozzle",
+            "sub_path": "filament/QIDI PPS-CF @Qidi Q1 Pro 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PPS-CF @Qidi Q1 Pro 0.6 nozzle",
+            "sub_path": "filament/QIDI PPS-CF @Qidi Q1 Pro 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PPS-CF @Qidi Q1 Pro 0.8 nozzle",
+            "sub_path": "filament/QIDI PPS-CF @Qidi Q1 Pro 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI PPS-CF @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI PPS-CF @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI PPS-CF @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI PPS-CF @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI PPS-CF @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI PPS-CF @Qidi X-Plus 4 0.8 nozzle.json"
         }
     ],
     "machine_list": [
@@ -970,15 +1542,15 @@
             "name": "fdm_qidi_x3_common",
             "sub_path": "machine/fdm_qidi_x3_common.json"
         },
-        {
+	{
             "name": "Qidi X-Plus 0.4 nozzle",
             "sub_path": "machine/Qidi X-Plus 0.4 nozzle.json"
         },
-        {
+	{
             "name": "Qidi X-Max 0.4 nozzle",
             "sub_path": "machine/Qidi X-Max 0.4 nozzle.json"
         },
-        {
+	{
             "name": "Qidi X-CF Pro 0.4 nozzle",
             "sub_path": "machine/Qidi X-CF Pro 0.4 nozzle.json"
         },
@@ -998,6 +1570,10 @@
             "name": "Qidi Q1 Pro 0.4 nozzle",
             "sub_path": "machine/Qidi Q1 Pro 0.4 nozzle.json"
         },
+        {
+            "name": "Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "machine/Qidi X-Plus 4 0.4 nozzle.json"
+        },
         {
             "name": "Qidi X-Smart 3 0.6 nozzle",
             "sub_path": "machine/Qidi X-Smart 3 0.6 nozzle.json"
@@ -1014,6 +1590,10 @@
             "name": "Qidi Q1 Pro 0.6 nozzle",
             "sub_path": "machine/Qidi Q1 Pro 0.6 nozzle.json"
         },
+        {
+            "name": "Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "machine/Qidi X-Plus 4 0.6 nozzle.json"
+        },
         {
             "name": "Qidi X-Smart 3 0.8 nozzle",
             "sub_path": "machine/Qidi X-Smart 3 0.8 nozzle.json"
@@ -1030,6 +1610,10 @@
             "name": "Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "machine/Qidi Q1 Pro 0.8 nozzle.json"
         },
+        {
+            "name": "Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "machine/Qidi X-Plus 4 0.8 nozzle.json"
+        },
         {
             "name": "Qidi X-Smart 3 0.2 nozzle",
             "sub_path": "machine/Qidi X-Smart 3 0.2 nozzle.json"
@@ -1045,6 +1629,10 @@
         {
             "name": "Qidi Q1 Pro 0.2 nozzle",
             "sub_path": "machine/Qidi Q1 Pro 0.2 nozzle.json"
+        },
+        {
+            "name": "Qidi X-Plus 4 0.2 nozzle",
+            "sub_path": "machine/Qidi X-Plus 4 0.2 nozzle.json"
         }
     ]
 }
diff --git a/resources/profiles/Qidi/Qidi X-Plus 4_cover.png b/resources/profiles/Qidi/Qidi X-Plus 4_cover.png
new file mode 100644
index 0000000000..f12e16f4ea
Binary files /dev/null and b/resources/profiles/Qidi/Qidi X-Plus 4_cover.png differ
diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi 0.2 nozzle.json
index 8a066b3f04..0702b13769 100644
--- a/resources/profiles/Qidi/filament/Generic ABS @Qidi 0.2 nozzle.json	
+++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi 0.2 nozzle.json	
@@ -8,6 +8,9 @@
     "inherits": "Generic ABS @Qidi",
     "filament_max_volumetric_speed": [
         "2"
+    ],
+    "nozzle_temperature": [
+        "260"
     ],
 	"compatible_printers": [
 		"Qidi X-Max 3 0.2 nozzle",
diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi 0.6 nozzle.json
new file mode 100644
index 0000000000..a14db54c01
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi 0.6 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSB99_Qidi_07",
+    "name": "Generic ABS @Qidi 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic ABS @Qidi",
+    "pressure_advance": [
+        "0.014"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+	"compatible_printers": [
+		"Qidi X-Max 3 0.6 nozzle",
+        "Qidi X-Plus 3 0.6 nozzle",
+        "Qidi X-Smart 3 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi 0.8 nozzle.json
new file mode 100644
index 0000000000..4503ae563d
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi 0.8 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSB99_Qidi_08",
+    "name": "Generic ABS @Qidi 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic ABS @Qidi",
+    "pressure_advance": [
+        "0.011"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+	"compatible_printers": [
+		"Qidi X-Max 3 0.8 nozzle",
+        "Qidi X-Plus 3 0.8 nozzle",
+        "Qidi X-Smart 3 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.4 nozzle.json
index bb21ee5df5..0fc44158c8 100644
--- a/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.4 nozzle.json	
@@ -6,31 +6,10 @@
     "from": "system",
     "instantiation": "true",
     "inherits": "Generic ABS @Qidi",
-    "fan_max_speed": [
-        "80"
-    ],
-    "fan_min_speed": [
-        "10"
-    ],
-    "hot_plate_temp": [
-        "90"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
-    "nozzle_temperature": [
-        "250"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
-    "slow_down_layer_time": [
-        "4"
-    ],
-    "slow_down_min_speed": [
-        "20"
+    "pressure_advance": [
+        "0.035"
     ],
     "compatible_printers": [
         "Qidi Q1 Pro 0.4 nozzle"
-            ]
+    ]
 }
diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.2 nozzle.json
new file mode 100644
index 0000000000..34d4680cf1
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.2 nozzle.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSB99_Qidi_09",
+    "name": "Generic ABS @Qidi X-Plus 4 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic ABS @Qidi",
+    "pressure_advance": [
+        "0.03"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.2 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..c726ee41a8
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSB99_Qidi_10",
+    "name": "Generic ABS @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic ABS @Qidi",
+    "pressure_advance": [
+        "0.03"
+    ],
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..67bfa3b4a4
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSB99_Qidi_11",
+    "name": "Generic ABS @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic ABS @Qidi",
+    "pressure_advance": [
+        "0.014"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..913c1219a0
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSB99_Qidi_12",
+    "name": "Generic ABS @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic ABS @Qidi",
+    "pressure_advance": [
+        "0.011"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi.json
index eb447bf912..c67943aca7 100644
--- a/resources/profiles/Qidi/filament/Generic ABS @Qidi.json	
+++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi.json	
@@ -21,20 +21,14 @@
     "pressure_advance": [
         "0.021"
     ],
-    "max_fan_speed":[
-        "80"
-    ],
-    "min_fan_speed":[
-        "10"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
     "filament_density":[
         "1.04"
     ],
     "filament_vendor": [
         "Generic"
+    ],
+    "nozzle_temperature": [
+        "250"
     ],
 	"compatible_printers": [
         "Qidi X-Plus 0.2 nozzle",
@@ -49,14 +43,8 @@
         "Qidi X-Plus 0.6 nozzle",
         "Qidi X-Max 0.6 nozzle",
         "Qidi X-CF Pro 0.6 nozzle",
-		"Qidi X-Smart 3 0.6 nozzle",
-		"Qidi X-Plus 3 0.6 nozzle",
-		"Qidi X-Max 3 0.6 nozzle",
         "Qidi X-Plus 0.8 nozzle",
         "Qidi X-Max 0.8 nozzle",
-        "Qidi X-CF Pro 0.8 nozzle",
-		"Qidi X-Smart 3 0.8 nozzle",
-		"Qidi X-Plus 3 0.8 nozzle",
-		"Qidi X-Max 3 0.8 nozzle"
+        "Qidi X-CF Pro 0.8 nozzle"
 	]
 }
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.2 nozzle.json
new file mode 100644
index 0000000000..851d192dd3
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.2 nozzle.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "filament_id": "GFB98",
+    "setting_id": "GFSB98_Qidi_07",
+    "name": "Generic ASA @Qidi X-Plus 4 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic ASA @Qidi",
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.2 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..cde954faa0
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,33 @@
+{
+    "type": "filament",
+    "filament_id": "GFB98",
+    "setting_id": "GFSB98_Qidi_08",
+    "name": "Generic ASA @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic ASA @Qidi",
+    "fan_cooling_layer_time": [
+        "40"
+    ],
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
+    "nozzle_temperature": [
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "pressure_advance": [
+        "0.035"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..e1cbe9647c
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,39 @@
+{
+    "type": "filament",
+    "filament_id": "GFB98",
+    "setting_id": "GFSB98_Qidi_09",
+    "name": "Generic ASA @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic ASA @Qidi",
+    "activate_chamber_temp_control": [
+        "0"
+    ],
+    "chamber_temperature": [
+        "55"
+    ],
+    "fan_cooling_layer_time": [
+        "40"
+    ],
+    "filament_max_volumetric_speed": [
+        "13"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "pressure_advance": [
+        "0.014"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..6c1305af22
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,39 @@
+{
+    "type": "filament",
+    "filament_id": "GFB98",
+    "setting_id": "GFSB98_Qidi_10",
+    "name": "Generic ASA @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic ASA @Qidi",
+    "activate_chamber_temp_control": [
+        "0"
+    ],
+    "chamber_temperature": [
+        "55"
+    ],
+    "fan_cooling_layer_time": [
+        "40"
+    ],
+    "filament_max_volumetric_speed": [
+        "13"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "pressure_advance": [
+        "0.011"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/Generic PA @Qidi.json b/resources/profiles/Qidi/filament/Generic PA @Qidi.json
index 69b0fb9784..335d152337 100644
--- a/resources/profiles/Qidi/filament/Generic PA @Qidi.json	
+++ b/resources/profiles/Qidi/filament/Generic PA @Qidi.json	
@@ -47,6 +47,9 @@
         "Qidi X-Max 3 0.8 nozzle",
         "Qidi Q1 Pro 0.4 nozzle",
         "Qidi Q1 Pro 0.6 nozzle",
-        "Qidi Q1 Pro 0.8 nozzle"
+        "Qidi Q1 Pro 0.8 nozzle",
+        "Qidi X-Plus 4 0.4 nozzle",
+        "Qidi X-Plus 4 0.6 nozzle",
+        "Qidi X-Plus 4 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PA-CF @Qidi.json b/resources/profiles/Qidi/filament/Generic PA-CF @Qidi.json
index 8393e45934..4f9500356a 100644
--- a/resources/profiles/Qidi/filament/Generic PA-CF @Qidi.json	
+++ b/resources/profiles/Qidi/filament/Generic PA-CF @Qidi.json	
@@ -65,6 +65,9 @@
         "Qidi X-Max 3 0.8 nozzle",
         "Qidi Q1 Pro 0.4 nozzle",
         "Qidi Q1 Pro 0.6 nozzle",
-        "Qidi Q1 Pro 0.8 nozzle"
+        "Qidi Q1 Pro 0.8 nozzle",
+        "Qidi X-Plus 4 0.4 nozzle",
+        "Qidi X-Plus 4 0.6 nozzle",
+        "Qidi X-Plus 4 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PC @Qidi.json b/resources/profiles/Qidi/filament/Generic PC @Qidi.json
index bbe6036e52..242f18e0ab 100644
--- a/resources/profiles/Qidi/filament/Generic PC @Qidi.json	
+++ b/resources/profiles/Qidi/filament/Generic PC @Qidi.json	
@@ -41,6 +41,9 @@
         "Qidi X-Max 3 0.8 nozzle",
         "Qidi Q1 Pro 0.4 nozzle",
         "Qidi Q1 Pro 0.6 nozzle",
-        "Qidi Q1 Pro 0.8 nozzle"
+        "Qidi Q1 Pro 0.8 nozzle",
+        "Qidi X-Plus 4 0.4 nozzle",
+        "Qidi X-Plus 4 0.6 nozzle",
+        "Qidi X-Plus 4 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi 0.2 nozzle.json
index 4990b2ab6c..18f81ff2df 100644
--- a/resources/profiles/Qidi/filament/Generic PETG @Qidi 0.2 nozzle.json	
+++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi 0.2 nozzle.json	
@@ -6,9 +6,6 @@
     "from": "system",
     "instantiation": "true",
     "inherits": "Generic PETG @Qidi",
-    "slow_down_min_speed": [
-        "10"
-    ],
     "filament_max_volumetric_speed": [
         "1"
     ],
diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.4 nozzle.json
index df5b5d6636..11345313ab 100644
--- a/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.4 nozzle.json	
@@ -6,12 +6,6 @@
     "from": "system",
     "instantiation": "true",
     "inherits": "Generic PETG @Qidi",
-    "hot_plate_temp_initial_layer": [
-        "80"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
     "pressure_advance":[
         "0.086"
     ],
diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.2 nozzle.json
new file mode 100644
index 0000000000..2380d6a6d8
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.2 nozzle.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "filament_id": "GFG99",
+    "setting_id": "GFSG99_Qidi_06",
+    "name": "Generic PETG @Qidi X-Plus 4 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PETG @Qidi",
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "pressure_advance": [
+        "0.056"
+    ],
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.2 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..c7c831be6f
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "filament_id": "GFG99",
+    "setting_id": "GFSG99_Qidi_07",
+    "name": "Generic PETG @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PETG @Qidi",
+    "pressure_advance":[
+        "0.056"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..90453cd816
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "filament_id": "GFG99",
+    "setting_id": "GFSG99_Qidi_08",
+    "name": "Generic PETG @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PETG @Qidi",
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..644308bbb6
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "filament_id": "GFG99",
+    "setting_id": "GFSG99_Qidi_09",
+    "name": "Generic PETG @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PETG @Qidi",
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi.json
index abf42bbedc..1dd8bde5fc 100644
--- a/resources/profiles/Qidi/filament/Generic PETG @Qidi.json	
+++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi.json	
@@ -16,10 +16,10 @@
         "30"
     ],
     "overhang_fan_speed": [
-        "100"
+        "90"
     ],
     "overhang_fan_threshold": [
-        "25%"
+        "10%"
     ],
     "fan_max_speed": [
         "40"
diff --git a/resources/profiles/Qidi/filament/Generic PETG-CF @Qidi.json b/resources/profiles/Qidi/filament/Generic PETG-CF @Qidi.json
index 20673f3745..3b8f26b8a6 100644
--- a/resources/profiles/Qidi/filament/Generic PETG-CF @Qidi.json	
+++ b/resources/profiles/Qidi/filament/Generic PETG-CF @Qidi.json	
@@ -118,6 +118,10 @@
         "Qidi Q1 Pro 0.2 nozzle",
         "Qidi Q1 Pro 0.4 nozzle",
         "Qidi Q1 Pro 0.6 nozzle",
-        "Qidi Q1 Pro 0.8 nozzle"
+        "Qidi Q1 Pro 0.8 nozzle",
+        "Qidi X-Plus 4 0.2 nozzle",
+        "Qidi X-Plus 4 0.4 nozzle",
+        "Qidi X-Plus 4 0.6 nozzle",
+        "Qidi X-Plus 4 0.8 nozzle"
     ]
 }
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi 0.6 nozzle.json
new file mode 100644
index 0000000000..7e01606605
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi 0.6 nozzle.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFSL99_Qidi_06",
+    "name": "Generic PLA @Qidi 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA @Qidi",
+    "pressure_advance": [
+        "0.016"
+    ],
+	"compatible_printers": [
+		"Qidi X-Max 3 0.6 nozzle",
+        "Qidi X-Plus 3 0.6 nozzle",
+        "Qidi X-Smart 3 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi 0.8 nozzle.json
new file mode 100644
index 0000000000..f57d5ece64
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi 0.8 nozzle.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFSL99_Qidi_07",
+    "name": "Generic PLA @Qidi 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA @Qidi",
+    "pressure_advance": [
+        "0.008"
+    ],
+	"compatible_printers": [
+		"Qidi X-Max 3 0.8 nozzle",
+        "Qidi X-Plus 3 0.8 nozzle",
+        "Qidi X-Smart 3 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.2 nozzle.json
index 1b23a47533..b2f916515c 100644
--- a/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.2 nozzle.json	
+++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.2 nozzle.json	
@@ -8,6 +8,12 @@
     "inherits": "Generic PLA @Qidi",
     "pressure_advance": [
         "0.042"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "nozzle_temperature": [
+        "210"
     ],
 	"compatible_printers": [
 		"Qidi Q1 Pro 0.2 nozzle"
diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.6 nozzle.json
index 1e1bbc634e..19ef5bf844 100644
--- a/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.6 nozzle.json	
@@ -8,6 +8,9 @@
     "inherits": "Generic PLA @Qidi",
 	"pressure_advance": [
         "0.016"
+    ],
+    "nozzle_temperature": [
+        "210"
     ],
 	"compatible_printers": [
 		"Qidi Q1 Pro 0.6 nozzle"
diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.8 nozzle.json
index c9feb119b2..0aa86b1bee 100644
--- a/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.8 nozzle.json	
@@ -8,6 +8,9 @@
     "inherits": "Generic PLA @Qidi",
     "pressure_advance": [
         "0.008"
+    ],
+    "nozzle_temperature": [
+        "210"
     ],
 	"compatible_printers": [
 		"Qidi Q1 Pro 0.8 nozzle"
diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.2 nozzle.json
new file mode 100644
index 0000000000..6b2b271c45
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.2 nozzle.json	
@@ -0,0 +1,21 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFSL99_Qidi_08",
+    "name": "Generic PLA @Qidi X-Plus 4 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA @Qidi",
+    "pressure_advance": [
+        "0.034"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.2 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..f77bff6d2b
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFSL99_Qidi_09",
+    "name": "Generic PLA @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA @Qidi",
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "pressure_advance": [
+        "0.034"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..2833ff3158
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFSL99_Qidi_10",
+    "name": "Generic PLA @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA @Qidi",
+	"pressure_advance": [
+        "0.016"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..1da09e4839
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFSL99_Qidi_11",
+    "name": "Generic PLA @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA @Qidi",
+    "pressure_advance": [
+        "0.008"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi.json
index 137d8dc03d..a1fb21735b 100644
--- a/resources/profiles/Qidi/filament/Generic PLA @Qidi.json	
+++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi.json	
@@ -37,14 +37,8 @@
         "Qidi X-Plus 0.6 nozzle",
         "Qidi X-Max 0.6 nozzle",
         "Qidi X-CF Pro 0.6 nozzle",
-		"Qidi X-Smart 3 0.6 nozzle",
-		"Qidi X-Plus 3 0.6 nozzle",
-		"Qidi X-Max 3 0.6 nozzle",
         "Qidi X-Plus 0.8 nozzle",
         "Qidi X-Max 0.8 nozzle",
-        "Qidi X-CF Pro 0.8 nozzle",
-		"Qidi X-Smart 3 0.8 nozzle",
-		"Qidi X-Plus 3 0.8 nozzle",
-		"Qidi X-Max 3 0.8 nozzle"
+        "Qidi X-CF Pro 0.8 nozzle"
 	]
 }
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi 0.2 nozzle.json
new file mode 100644
index 0000000000..ac7b7841a6
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi 0.2 nozzle.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "filament_id": "GFL96",
+    "setting_id": "GFSL96_Qidi_02",
+    "name": "Generic PLA Silk @Qidi 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA Silk @Qidi",
+	"compatible_printers": [
+		"Qidi X-Plus 0.2 nozzle",
+        "Qidi X-Max 0.2 nozzle",
+        "Qidi X-CF Pro 0.2 nozzle",
+		"Qidi X-Smart 3 0.2 nozzle",
+		"Qidi X-Plus 3 0.2 nozzle",
+		"Qidi X-Max 3 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi 0.4 nozzle.json
new file mode 100644
index 0000000000..fe2d37a9ad
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi 0.4 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFL96",
+    "setting_id": "GFSL96_Qidi_03",
+    "name": "Generic PLA Silk @Qidi 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA Silk @Qidi",
+    "pressure_advance": [
+        "0.024"
+    ],
+    "filament_max_volumetric_speed": [
+		"12"
+	],
+	"compatible_printers": [
+		"Qidi X-Smart 3 0.4 nozzle",
+		"Qidi X-Plus 3 0.4 nozzle",
+		"Qidi X-Max 3 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi 0.6 nozzle.json
new file mode 100644
index 0000000000..154ca5ea3e
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi 0.6 nozzle.json	
@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "filament_id": "GFL96",
+    "setting_id": "GFSL96_Qidi_04",
+    "name": "Generic PLA Silk @Qidi 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA Silk @Qidi",
+    "filament_max_volumetric_speed": [
+		"12"
+	],
+    "pressure_advance": [
+        "0.016"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.6 nozzle",
+        "Qidi X-Max 0.6 nozzle",
+        "Qidi X-CF Pro 0.6 nozzle",
+		"Qidi X-Smart 3 0.6 nozzle",
+		"Qidi X-Plus 3 0.6 nozzle",
+		"Qidi X-Max 3 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi 0.8 nozzle.json
new file mode 100644
index 0000000000..6a8f5c3f33
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi 0.8 nozzle.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "filament_id": "GFL96",
+    "setting_id": "GFSL96_Qidi_05",
+    "name": "Generic PLA Silk @Qidi 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA Silk @Qidi",
+	"compatible_printers": [
+        "Qidi X-Plus 0.8 nozzle",
+        "Qidi X-Max 0.8 nozzle",
+        "Qidi X-CF Pro 0.8 nozzle",
+		"Qidi X-Smart 3 0.8 nozzle",
+		"Qidi X-Plus 3 0.8 nozzle",
+		"Qidi X-Max 3 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.2 nozzle.json
new file mode 100644
index 0000000000..3adfbaf22a
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.2 nozzle.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "filament_id": "GFL96",
+    "setting_id": "GFSL96_Qidi_06",
+    "name": "Generic PLA Silk @Qidi Q1 Pro 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA Silk @Qidi",
+	"compatible_printers": [
+		"Qidi Q1 Pro 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle.json
new file mode 100644
index 0000000000..1386bb705f
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "filament_id": "GFL96",
+    "setting_id": "GFSL96_Qidi_07",
+    "name": "Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA Silk @Qidi",
+	"compatible_printers": [
+		"Qidi Q1 Pro 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.6 nozzle.json
new file mode 100644
index 0000000000..7980dbd8b9
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.6 nozzle.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "filament_id": "GFL96",
+    "setting_id": "GFSL96_Qidi_08",
+    "name": "Generic PLA Silk @Qidi Q1 Pro 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA Silk @Qidi",
+    "pressure_advance": [
+        "0.014"
+    ],
+	"compatible_printers": [
+		"Qidi Q1 Pro 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.8 nozzle.json
new file mode 100644
index 0000000000..d6a83274c3
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.8 nozzle.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "filament_id": "GFL96",
+    "setting_id": "GFSL96_Qidi_09",
+    "name": "Generic PLA Silk @Qidi Q1 Pro 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA Silk @Qidi",
+	"compatible_printers": [
+		"Qidi Q1 Pro 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.2 nozzle.json
new file mode 100644
index 0000000000..5df2944fe8
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.2 nozzle.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "filament_id": "GFL96",
+    "setting_id": "GFSL96_Qidi_10",
+    "name": "Generic PLA Silk @Qidi X-Plus 4 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA Silk @Qidi",
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.2 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..965a22280c
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "filament_id": "GFL96",
+    "setting_id": "GFSL96_Qidi_11",
+    "name": "Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA Silk @Qidi",
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..49de88b80a
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,15 @@
+{
+    "type": "filament",
+    "filament_id": "GFL96",
+    "setting_id": "GFSL96_Qidi_12",
+    "name": "Generic PLA Silk @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA Silk @Qidi",
+    "pressure_advance": [
+        "0.014"
+    ],
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.6 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..4690b02b6e
--- /dev/null
+++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "filament_id": "GFL96",
+    "setting_id": "GFSL96_Qidi_13",
+    "name": "Generic PLA Silk @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Generic PLA Silk @Qidi",
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.8 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi.json
index fcac713fb8..86a85db3b6 100644
--- a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi.json	
+++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi.json	
@@ -34,33 +34,8 @@
         "Generic"
     ],
 	"compatible_printers": [
-		"Qidi X-Plus 0.2 nozzle",
-        "Qidi X-Max 0.2 nozzle",
-        "Qidi X-CF Pro 0.2 nozzle",
-		"Qidi X-Smart 3 0.2 nozzle",
-		"Qidi X-Plus 3 0.2 nozzle",
-		"Qidi X-Max 3 0.2 nozzle",
         "Qidi X-Plus 0.4 nozzle",
         "Qidi X-Max 0.4 nozzle",
-        "Qidi X-CF Pro 0.4 nozzle",
-		"Qidi X-Smart 3 0.4 nozzle",
-		"Qidi X-Plus 3 0.4 nozzle",
-		"Qidi X-Max 3 0.4 nozzle",
-        "Qidi X-Plus 0.6 nozzle",
-        "Qidi X-Max 0.6 nozzle",
-        "Qidi X-CF Pro 0.6 nozzle",
-		"Qidi X-Smart 3 0.6 nozzle",
-		"Qidi X-Plus 3 0.6 nozzle",
-		"Qidi X-Max 3 0.6 nozzle",
-        "Qidi X-Plus 0.8 nozzle",
-        "Qidi X-Max 0.8 nozzle",
-        "Qidi X-CF Pro 0.8 nozzle",
-		"Qidi X-Smart 3 0.8 nozzle",
-		"Qidi X-Plus 3 0.8 nozzle",
-		"Qidi X-Max 3 0.8 nozzle",
-        "Qidi Q1 Pro 0.2 nozzle",
-        "Qidi Q1 Pro 0.4 nozzle",
-        "Qidi Q1 Pro 0.6 nozzle",
-        "Qidi Q1 Pro 0.8 nozzle"
+        "Qidi X-CF Pro 0.4 nozzle"
 	]
 }
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PLA-CF @Qidi.json b/resources/profiles/Qidi/filament/Generic PLA-CF @Qidi.json
index 4d2af6f715..a6a5e1887e 100644
--- a/resources/profiles/Qidi/filament/Generic PLA-CF @Qidi.json	
+++ b/resources/profiles/Qidi/filament/Generic PLA-CF @Qidi.json	
@@ -64,6 +64,10 @@
         "Qidi Q1 Pro 0.2 nozzle",
         "Qidi Q1 Pro 0.4 nozzle",
         "Qidi Q1 Pro 0.6 nozzle",
-        "Qidi Q1 Pro 0.8 nozzle"
+        "Qidi Q1 Pro 0.8 nozzle",
+		"Qidi X-Plus 4 0.2 nozzle",
+        "Qidi X-Plus 4 0.4 nozzle",
+        "Qidi X-Plus 4 0.6 nozzle",
+        "Qidi X-Plus 4 0.8 nozzle"
 	]
 }
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic PVA @Qidi.json b/resources/profiles/Qidi/filament/Generic PVA @Qidi.json
index a04419a002..b9c2ae8833 100644
--- a/resources/profiles/Qidi/filament/Generic PVA @Qidi.json	
+++ b/resources/profiles/Qidi/filament/Generic PVA @Qidi.json	
@@ -49,6 +49,10 @@
         "Qidi Q1 Pro 0.2 nozzle",
         "Qidi Q1 Pro 0.4 nozzle",
         "Qidi Q1 Pro 0.6 nozzle",
-        "Qidi Q1 Pro 0.8 nozzle"
+        "Qidi Q1 Pro 0.8 nozzle",
+		"Qidi X-Plus 4 0.2 nozzle",
+        "Qidi X-Plus 4 0.4 nozzle",
+        "Qidi X-Plus 4 0.6 nozzle",
+        "Qidi X-Plus 4 0.8 nozzle"
 	]
 }
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/Generic TPU @Qidi.json b/resources/profiles/Qidi/filament/Generic TPU @Qidi.json
index e7fd4efe82..065b7a865a 100644
--- a/resources/profiles/Qidi/filament/Generic TPU @Qidi.json	
+++ b/resources/profiles/Qidi/filament/Generic TPU @Qidi.json	
@@ -18,7 +18,7 @@
     "nozzle_temperature_initial_layer": [
         "230"
     ],
-      "nozzle_temperature": [
+    "nozzle_temperature": [
         "230"
     ],
     "filament_vendor": [
@@ -43,6 +43,9 @@
         "Qidi X-Plus 3 0.8 nozzle",
         "Qidi X-Max 3 0.8 nozzle",
         "Qidi Q1 Pro 0.6 nozzle",
-        "Qidi Q1 Pro 0.8 nozzle"
+        "Qidi Q1 Pro 0.8 nozzle",
+        "Qidi X-Plus 4 0.4 nozzle",
+        "Qidi X-Plus 4 0.6 nozzle",
+        "Qidi X-Plus 4 0.8 nozzle"
 	]
 }
\ No newline at end of file
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi 0.6 nozzle.json
new file mode 100644
index 0000000000..7523ccfc1e
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi 0.6 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_26",
+    "name": "QIDI ABS Odorless @Qidi 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Odorless @Qidi",
+    "pressure_advance": [
+        "0.014"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.6 nozzle",
+        "Qidi X-Max 0.6 nozzle",
+        "Qidi X-CF Pro 0.6 nozzle",
+		"Qidi X-Smart 3 0.6 nozzle",
+		"Qidi X-Plus 3 0.6 nozzle",
+		"Qidi X-Max 3 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi 0.8 nozzle.json
index f1fd1ac7f4..d458d53198 100644
--- a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi 0.8 nozzle.json	
@@ -11,6 +11,9 @@
     ],
     "slow_down_min_speed": [
         "10"
+    ],
+    "pressure_advance": [
+        "0.011"
     ],
 	"compatible_printers": [
         "Qidi X-Plus 0.8 nozzle",
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.4 nozzle.json
index 9dc6874c0c..b54d7c98f9 100644
--- a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.4 nozzle.json	
@@ -6,17 +6,11 @@
     "from": "system",
     "instantiation": "true",
     "inherits": "QIDI ABS Odorless @Qidi",
-    "filament_max_volumetric_speed": [
-        "24.5"
-    ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
     "nozzle_temperature": [
         "260"
     ],
     "pressure_advance": [
-        "0.035"
+        "0.023"
     ],
     "slow_down_min_speed": [
         "20"
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.6 nozzle.json
index 90c1abe80d..490f693254 100644
--- a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.6 nozzle.json	
@@ -9,14 +9,11 @@
     "filament_max_volumetric_speed": [
         "24.5"
     ],
-    "hot_plate_temp_initial_layer": [
-        "90"
-    ],
     "nozzle_temperature": [
         "250"
     ],
     "pressure_advance": [
-        "0.014"
+        "0.016"
     ],
     "slow_down_min_speed": [
         "20"
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.8 nozzle.json
index b6a0a6c663..b3b4fb423c 100644
--- a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi Q1 Pro 0.8 nozzle.json	
@@ -16,7 +16,7 @@
         "250"
     ],
     "pressure_advance": [
-        "0.011"
+        "0.008"
     ],
     "slow_down_min_speed": [
         "10"
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi X-Plus 4 0.2 nozzle.json
new file mode 100644
index 0000000000..b13ea4b998
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi X-Plus 4 0.2 nozzle.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_27",
+    "name": "QIDI ABS Odorless @Qidi X-Plus 4 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Odorless @Qidi",
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "pressure_advance": [
+        "0.03"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.2 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..ca3010124e
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_28",
+    "name": "QIDI ABS Odorless @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Odorless @Qidi",
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "pressure_advance": [
+        "0.03"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..b513d3e582
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_29",
+    "name": "QIDI ABS Odorless @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Odorless @Qidi",
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "pressure_advance": [
+        "0.014"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..16150dbb0c
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_30",
+    "name": "QIDI ABS Odorless @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Odorless @Qidi",
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "pressure_advance": [
+        "0.011"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi.json b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi.json
index ce3cbd143d..33c47602f7 100644
--- a/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi.json	
+++ b/resources/profiles/Qidi/filament/QIDI ABS Odorless @Qidi.json	
@@ -18,14 +18,14 @@
     "pressure_advance": [
         "0.021"
     ],
-    "max_fan_speed":[
+    "fan_max_speed": [
         "80"
     ],
-    "min_fan_speed":[
+    "fan_min_speed": [
         "10"
     ],
     "overhang_fan_speed": [
-        "100"
+        "80"
     ],
     "filament_density":[
         "1.02"
@@ -36,12 +36,6 @@
         "Qidi X-CF Pro 0.4 nozzle",
 		"Qidi X-Smart 3 0.4 nozzle",
 		"Qidi X-Plus 3 0.4 nozzle",
-		"Qidi X-Max 3 0.4 nozzle",
-        "Qidi X-Plus 0.6 nozzle",
-        "Qidi X-Max 0.6 nozzle",
-        "Qidi X-CF Pro 0.6 nozzle",
-		"Qidi X-Smart 3 0.6 nozzle",
-		"Qidi X-Plus 3 0.6 nozzle",
-		"Qidi X-Max 3 0.6 nozzle"
+		"Qidi X-Max 3 0.4 nozzle"
 	]
 }
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi 0.2 nozzle.json
index c84d4ad66e..b3b772cf29 100644
--- a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi 0.2 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi 0.2 nozzle.json	
@@ -8,6 +8,9 @@
     "inherits": "QIDI ABS Rapido @Qidi",
     "filament_max_volumetric_speed": [
         "2"
+    ],
+    "chamber_temperatures" : [
+        "0"
     ],
 	"compatible_printers": [
         "Qidi X-Plus 0.2 nozzle",
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi 0.6 nozzle.json
new file mode 100644
index 0000000000..96e83614c0
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi 0.6 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_31",
+    "name": "QIDI ABS Rapido @Qidi 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido @Qidi",
+    "pressure_advance": [
+        "0.014"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.6 nozzle",
+        "Qidi X-Max 0.6 nozzle",
+        "Qidi X-CF Pro 0.6 nozzle",
+		"Qidi X-Smart 3 0.6 nozzle",
+		"Qidi X-Plus 3 0.6 nozzle",
+		"Qidi X-Max 3 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi 0.8 nozzle.json
index 86550c626c..6a05ea5110 100644
--- a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi 0.8 nozzle.json	
@@ -7,10 +7,13 @@
     "instantiation": "true",
     "inherits": "QIDI ABS Rapido @Qidi",
     "nozzle_temperature": [
-        "270"
+        "260"
     ],
     "slow_down_min_speed": [
         "10"
+    ],
+    "pressure_advance": [
+        "0.011"
     ],
 	"compatible_printers": [
         "Qidi X-Plus 0.8 nozzle",
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi X-Plus 4 0.2 nozzle.json
new file mode 100644
index 0000000000..3d4b1e0646
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi X-Plus 4 0.2 nozzle.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_32",
+    "name": "QIDI ABS Rapido @Qidi X-Plus 4 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido @Qidi",
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "pressure_advance": [
+        "0.03"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.2 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..352f0faf01
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_33",
+    "name": "QIDI ABS Rapido @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido @Qidi",
+    "activate_chamber_temp_control": [
+        "0"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "pressure_advance": [
+        "0.03"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..b725790b3d
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_34",
+    "name": "QIDI ABS Rapido @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido @Qidi",
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "pressure_advance": [
+        "0.014"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..b7cf1f3c13
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_35",
+    "name": "QIDI ABS Rapido @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido @Qidi",
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "pressure_advance": [
+        "0.011"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi.json
index 49c81f07b7..aee79908a7 100644
--- a/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi.json	
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido @Qidi.json	
@@ -18,14 +18,14 @@
     "pressure_advance": [
         "0.021"
     ],
-    "max_fan_speed":[
+    "fan_max_speed": [
         "80"
     ],
-    "min_fan_speed":[
+    "fan_min_speed": [
         "20"
     ],
     "overhang_fan_speed": [
-        "100"
+        "80"
     ],
     "filament_density":[
         "1.05"
@@ -36,13 +36,7 @@
         "Qidi X-CF Pro 0.4 nozzle",
 		"Qidi X-Smart 3 0.4 nozzle",
 		"Qidi X-Plus 3 0.4 nozzle",
-		"Qidi X-Max 3 0.4 nozzle",
-        "Qidi X-Plus 0.6 nozzle",
-        "Qidi X-Max 0.6 nozzle",
-        "Qidi X-CF Pro 0.6 nozzle",
-		"Qidi X-Smart 3 0.6 nozzle",
-		"Qidi X-Plus 3 0.6 nozzle",
-		"Qidi X-Max 3 0.6 nozzle"
+		"Qidi X-Max 3 0.4 nozzle"
 
 	]
 }
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi 0.2 nozzle.json
new file mode 100644
index 0000000000..fdea735c6c
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi 0.2 nozzle.json	
@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_40",
+    "name": "QIDI ABS Rapido Metal @Qidi 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido Metal @Qidi",
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "chamber_temperatures" : [
+        "0"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.2 nozzle",
+        "Qidi X-Max 0.2 nozzle",
+        "Qidi X-CF Pro 0.2 nozzle",
+		"Qidi X-Smart 3 0.2 nozzle",
+		"Qidi X-Plus 3 0.2 nozzle",
+		"Qidi X-Max 3 0.2 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi 0.6 nozzle.json
new file mode 100644
index 0000000000..318316a0d1
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi 0.6 nozzle.json	
@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_41",
+    "name": "QIDI ABS Rapido Metal @Qidi 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido Metal @Qidi",
+    "pressure_advance": [
+        "0.014"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.6 nozzle",
+        "Qidi X-Max 0.6 nozzle",
+        "Qidi X-CF Pro 0.6 nozzle",
+		"Qidi X-Smart 3 0.6 nozzle",
+		"Qidi X-Plus 3 0.6 nozzle",
+		"Qidi X-Max 3 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi 0.8 nozzle.json
new file mode 100644
index 0000000000..f524923a08
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi 0.8 nozzle.json	
@@ -0,0 +1,29 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_42",
+    "name": "QIDI ABS Rapido Metal @Qidi 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido Metal @Qidi",
+    "nozzle_temperature": [
+        "260"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "pressure_advance": [
+        "0.011"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.8 nozzle",
+        "Qidi X-Max 0.8 nozzle",
+        "Qidi X-CF Pro 0.8 nozzle",
+		"Qidi X-Smart 3 0.8 nozzle",
+		"Qidi X-Plus 3 0.8 nozzle",
+		"Qidi X-Max 3 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.2 nozzle.json
new file mode 100644
index 0000000000..430300c1c6
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.2 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_43",
+    "name": "QIDI ABS Rapido Metal @Qidi Q1 Pro 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido Metal @Qidi",
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi Q1 Pro 0.2 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.4 nozzle.json
new file mode 100644
index 0000000000..d5642b661f
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.4 nozzle.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_44",
+    "name": "QIDI ABS Rapido Metal @Qidi Q1 Pro 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido Metal @Qidi",
+    "activate_chamber_temp_control": [
+        "0"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "pressure_advance": [
+        "0.035"
+    ],
+    "compatible_printers": [
+        "Qidi Q1 Pro 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.6 nozzle.json
new file mode 100644
index 0000000000..5405a91bec
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.6 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_45",
+    "name": "QIDI ABS Rapido Metal @Qidi Q1 Pro 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido Metal @Qidi",
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "pressure_advance": [
+        "0.016"
+    ],
+    "compatible_printers": [
+        "Qidi Q1 Pro 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.8 nozzle.json
new file mode 100644
index 0000000000..4fa3636208
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi Q1 Pro 0.8 nozzle.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_46",
+    "name": "QIDI ABS Rapido Metal @Qidi Q1 Pro 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido Metal @Qidi",
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "pressure_advance": [
+        "0.012"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "compatible_printers": [
+        "Qidi Q1 Pro 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.2 nozzle.json
new file mode 100644
index 0000000000..04967f024b
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.2 nozzle.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_47",
+    "name": "QIDI ABS Rapido Metal @Qidi X-Plus 4 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido Metal @Qidi",
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "pressure_advance": [
+        "0.03"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.2 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..6d0f7ec9b3
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_48",
+    "name": "QIDI ABS Rapido Metal @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido Metal @Qidi",
+    "activate_chamber_temp_control": [
+        "0"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "pressure_advance": [
+        "0.03"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..9e94055ce9
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_49",
+    "name": "QIDI ABS Rapido Metal @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido Metal @Qidi",
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "pressure_advance": [
+        "0.016"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..e2ba76dd0d
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_50",
+    "name": "QIDI ABS Rapido Metal @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS Rapido Metal @Qidi",
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "90"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "pressure_advance": [
+        "0.008"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi.json b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi.json
new file mode 100644
index 0000000000..2f9740919f
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS Rapido Metal @Qidi.json	
@@ -0,0 +1,42 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_39",
+    "name": "QIDI ABS Rapido Metal @Qidi",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_abs",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "22"
+    ],
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "pressure_advance": [
+        "0.021"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "fan_min_speed": [
+        "20"
+    ],
+    "overhang_fan_speed": [
+        "80"
+    ],
+    "filament_density":[
+        "1.05"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.4 nozzle",
+        "Qidi X-Max 0.4 nozzle",
+        "Qidi X-CF Pro 0.4 nozzle",
+		"Qidi X-Smart 3 0.4 nozzle",
+		"Qidi X-Plus 3 0.4 nozzle",
+		"Qidi X-Max 3 0.4 nozzle"
+
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..df4f8cea10
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_36",
+    "name": "QIDI ABS-GF @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS-GF @Qidi",
+    "filament_max_volumetric_speed": [
+        "22"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "pressure_advance": [
+        "0.03"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "5"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..56b1f40f0b
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_37",
+    "name": "QIDI ABS-GF @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS-GF @Qidi",
+    "filament_max_volumetric_speed": [
+        "22"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "5"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..e9c4368efa
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFB00",
+    "setting_id": "GFSB00_Qidi_38",
+    "name": "QIDI ABS-GF @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ABS-GF @Qidi",
+    "filament_max_volumetric_speed": [
+        "22"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "5"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi.json b/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi.json
index 914554c30b..24b366f027 100644
--- a/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi.json	
+++ b/resources/profiles/Qidi/filament/QIDI ABS-GF @Qidi.json	
@@ -37,10 +37,13 @@
         "100"
     ],
     "overhang_fan_speed": [
-        "100"
+        "80"
     ],
     "filament_density":[
         "1.15"
+    ],
+    "slow_down_layer_time": [
+        "8"
     ],
 	"compatible_printers": [
         "Qidi X-Plus 0.4 nozzle",
diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi.json b/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi.json
index b132f73564..1ef234dc1f 100644
--- a/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi.json	
+++ b/resources/profiles/Qidi/filament/QIDI ABS-GF10 @Qidi.json	
@@ -37,7 +37,10 @@
         "100"
     ],
     "overhang_fan_speed": [
-        "100"
+        "80"
+    ],
+    "slow_down_layer_time": [
+        "8"
     ],
     "compatible_printers": [
         "Qidi X-Plus 0.4 nozzle",
diff --git a/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi.json b/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi.json
index 3b80d375cf..89b2b5ceac 100644
--- a/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi.json	
+++ b/resources/profiles/Qidi/filament/QIDI ABS-GF25 @Qidi.json	
@@ -37,7 +37,10 @@
         "100"
     ],
     "overhang_fan_speed": [
-        "100"
+        "80"
+    ],
+    "slow_down_layer_time": [
+        "8"
     ],
 	"compatible_printers": [
         "Qidi X-Plus 0.4 nozzle",
diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi 0.2 nozzle.json
index 66fd97f87d..8566ad7054 100644
--- a/resources/profiles/Qidi/filament/QIDI ASA @Qidi 0.2 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi 0.2 nozzle.json	
@@ -9,8 +9,8 @@
     "filament_max_volumetric_speed": [
         "2"
     ],
-    "enable_volume_fan":[
-        "40"
+    "chamber_temperatures" : [
+        "0"
     ],
 	"compatible_printers": [
 		"Qidi X-Max 3 0.2 nozzle",
diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi 0.6 nozzle.json
new file mode 100644
index 0000000000..79eea95b24
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi 0.6 nozzle.json	
@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "filament_id": "GFB01",
+    "setting_id": "GFSB01_Qidi_08",
+    "name": "QIDI ASA @Qidi 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ASA @Qidi",
+    "pressure_advance": [
+        "0.014"
+    ],
+	"compatible_printers": [
+		"Qidi X-Max 3 0.6 nozzle",
+        "Qidi X-Plus 3 0.6 nozzle",
+        "Qidi X-Smart 3 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi 0.8 nozzle.json
new file mode 100644
index 0000000000..d3f270fe95
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi 0.8 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFB01",
+    "setting_id": "GFSB01_Qidi_09",
+    "name": "QIDI ASA @Qidi 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ASA @Qidi",
+    "pressure_advance": [
+        "0.011"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+	"compatible_printers": [
+		"Qidi X-Max 3 0.8 nozzle",
+        "Qidi X-Plus 3 0.8 nozzle",
+        "Qidi X-Smart 3 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.2 nozzle.json
index 146460e98d..1b0b62f4d3 100644
--- a/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.2 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.2 nozzle.json	
@@ -8,6 +8,12 @@
     "inherits": "QIDI ASA @Qidi",
     "filament_max_volumetric_speed": [
         "2"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ],
+    "chamber_temperatures" : [
+        "0"
     ],
 	"compatible_printers": [
 		"Qidi Q1 Pro 0.2 nozzle"
diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.4 nozzle.json
index 61d203c633..8dd2cd4efd 100644
--- a/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi Q1 Pro 0.4 nozzle.json	
@@ -18,9 +18,6 @@
     "nozzle_temperature_initial_layer": [
         "250"
     ],
-    "overhang_fan_speed": [
-        "100"
-    ],
     "pressure_advance": [
         "0.035"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Plus 4 0.2 nozzle.json
new file mode 100644
index 0000000000..4f3747e76c
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Plus 4 0.2 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFB01",
+    "setting_id": "GFSB01_Qidi_10",
+    "name": "QIDI ASA @Qidi X-Plus 4 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ASA @Qidi",
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ],
+    "chamber_temperatures" : [
+        "0"
+    ],
+    "pressure_advance": [
+        "0.03"
+    ],
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.2 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..98ea781cfd
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "filament_id": "GFB01",
+    "setting_id": "GFSB01_Qidi_11",
+    "name": "QIDI ASA @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ASA @Qidi",
+    "chamber_temperature": [
+        "55"
+    ],
+    "fan_cooling_layer_time": [
+        "40"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "pressure_advance": [
+        "0.03"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..08b02f2320
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "filament_id": "GFB01",
+    "setting_id": "GFSB01_Qidi_12",
+    "name": "QIDI ASA @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ASA @Qidi",
+    "fan_cooling_layer_time": [
+        "40"
+    ],
+    "filament_max_volumetric_speed": [
+        "13"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "pressure_advance": [
+        "0.014"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..6599bc74aa
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "filament_id": "GFB01",
+    "setting_id": "GFSB01_Qidi_13",
+    "name": "QIDI ASA @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ASA @Qidi",
+    "fan_cooling_layer_time": [
+        "40"
+    ],
+    "filament_max_volumetric_speed": [
+        "13"
+    ],
+    "nozzle_temperature": [
+        "255"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "pressure_advance": [
+        "0.011"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ASA @Qidi.json b/resources/profiles/Qidi/filament/QIDI ASA @Qidi.json
index bec9e38d9c..d044555e5b 100644
--- a/resources/profiles/Qidi/filament/QIDI ASA @Qidi.json	
+++ b/resources/profiles/Qidi/filament/QIDI ASA @Qidi.json	
@@ -48,18 +48,6 @@
     "pressure_advance": [
         "0.021"
     ],
-    "max_fan_speed":[
-        "50"
-    ],
-    "min_fan_speed":[
-        "10"
-    ],
-    "filament_retraction_length": [
-        "0.01"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
     "filament_density":[
         "1.07"
     ],
@@ -76,15 +64,9 @@
         "Qidi X-Plus 0.6 nozzle",
         "Qidi X-Max 0.6 nozzle",
         "Qidi X-CF Pro 0.6 nozzle",
-		"Qidi X-Smart 3 0.6 nozzle",
-		"Qidi X-Plus 3 0.6 nozzle",
-		"Qidi X-Max 3 0.6 nozzle",
         "Qidi X-Plus 0.8 nozzle",
         "Qidi X-Max 0.8 nozzle",
-        "Qidi X-CF Pro 0.8 nozzle",
-		"Qidi X-Smart 3 0.8 nozzle",
-		"Qidi X-Plus 3 0.8 nozzle",
-		"Qidi X-Max 3 0.8 nozzle"
+        "Qidi X-CF Pro 0.8 nozzle"
         
 	]
 }
diff --git a/resources/profiles/Qidi/filament/QIDI ASA-Aero @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI ASA-Aero @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..e353634ef4
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI ASA-Aero @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFB01",
+    "setting_id": "GFSB01_Qidi_14",
+    "name": "QIDI ASA-Aero @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI ASA-Aero @Qidi",
+    "fan_cooling_layer_time": [
+        "40"
+    ],
+    "nozzle_temperature": [
+        "260"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI ASA-Aero @Qidi.json b/resources/profiles/Qidi/filament/QIDI ASA-Aero @Qidi.json
index 30b02a2b35..c5d07f469c 100644
--- a/resources/profiles/Qidi/filament/QIDI ASA-Aero @Qidi.json	
+++ b/resources/profiles/Qidi/filament/QIDI ASA-Aero @Qidi.json	
@@ -51,15 +51,6 @@
     "filament_retraction_length": [
         "0.01"
     ],
-    "max_fan_speed":[
-        "50"
-    ],
-    "min_fan_speed":[
-        "10"
-    ],
-    "overhang_fan_speed": [
-        "100"
-    ],
     "filament_density":[
         "1.03"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle.json
index 6063c8a6c5..52716b103c 100644
--- a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.4 nozzle.json	
@@ -9,9 +9,6 @@
     "filament_max_volumetric_speed": [
         "4"
     ],
-    "overhang_fan_speed": [
-        "50"
-    ],
     "slow_down_min_speed": [
         "20"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.6 nozzle.json
index 679913bb1c..5c9af2c0e1 100644
--- a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.6 nozzle.json	
@@ -9,9 +9,6 @@
     "filament_max_volumetric_speed": [
         "4"
     ],
-    "overhang_fan_speed": [
-        "50"
-    ],
     "slow_down_min_speed": [
         "20"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.8 nozzle.json
index e4ce33804b..7a40c0d605 100644
--- a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi Q1 Pro 0.8 nozzle.json	
@@ -9,9 +9,6 @@
     "filament_max_volumetric_speed": [
         "4"
     ],
-    "overhang_fan_speed": [
-        "50"
-    ],
     "slow_down_min_speed": [
         "20"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..10aeb2f183
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "filament_id": "GFN04",
+    "setting_id": "GFSN04_Qidi_11",
+    "name": "QIDI PA-Ultra @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PA-Ultra @Qidi",
+    "filament_max_volumetric_speed": [
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..96f9f536b4
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "filament_id": "GFN04",
+    "setting_id": "GFSN04_Qidi_12",
+    "name": "QIDI PA-Ultra @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PA-Ultra @Qidi",
+    "filament_max_volumetric_speed": [
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..aae5b92381
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "filament_id": "GFN04",
+    "setting_id": "GFSN04_Qidi_13",
+    "name": "QIDI PA-Ultra @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PA-Ultra @Qidi",
+    "filament_max_volumetric_speed": [
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi.json b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi.json
index 35922d8e98..6843dd277f 100644
--- a/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi.json	
+++ b/resources/profiles/Qidi/filament/QIDI PA-Ultra @Qidi.json	
@@ -24,10 +24,10 @@
     "pressure_advance": [
         "0.03"
     ],
-    "max_fan_speed":[
+    "fan_max_speed": [
         "40"
     ],
-    "min_fan_speed":[
+    "fan_min_speed": [
         "20"
     ],
     "hot_plate_temp_initial_layer" : [
@@ -44,6 +44,21 @@
     ],
     "filament_flow_ratio": [
         "0.96"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "close_fan_the_first_x_layers": [
+        "1"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "enable_overhang_bridge_fan": [
+        "0"
     ],
 	  "compatible_printers": [
         "Qidi X-Plus 0.4 nozzle",
diff --git a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.4 nozzle.json
index 7e00578575..2e4902a3ac 100644
--- a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.4 nozzle.json	
@@ -15,9 +15,6 @@
     "nozzle_temperature_initial_layer": [
         "300"
     ],
-    "overhang_fan_speed": [
-        "50"
-    ],
     "pressure_advance": [
         "0.032"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.6 nozzle.json
index 9bb457896e..2f0611d6aa 100644
--- a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.6 nozzle.json	
@@ -15,9 +15,6 @@
     "nozzle_temperature_initial_layer": [
         "300"
     ],
-    "overhang_fan_speed": [
-        "50"
-    ],
     "pressure_advance": [
         "0.032"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.8 nozzle.json
index a0c27db033..2e5d4245ac 100644
--- a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi Q1 Pro 0.8 nozzle.json	
@@ -15,9 +15,6 @@
     "nozzle_temperature_initial_layer": [
         "300"
     ],
-    "overhang_fan_speed": [
-        "50"
-    ],
     "pressure_advance": [
         "0.032"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..ae451aa3d6
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFN04",
+    "setting_id": "GFSN04_Qidi_08",
+    "name": "QIDI PAHT-CF @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PAHT-CF @Qidi",
+    "fan_cooling_layer_time": [
+        "10"
+    ],
+    "nozzle_temperature": [
+        "300"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "300"
+    ],
+    "pressure_advance": [
+        "0.032"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..82cd09641d
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFN04",
+    "setting_id": "GFSN04_Qidi_09",
+    "name": "QIDI PAHT-CF @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PAHT-CF @Qidi",
+    "fan_cooling_layer_time": [
+        "10"
+    ],
+    "nozzle_temperature": [
+        "300"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "300"
+    ],
+    "pressure_advance": [
+        "0.032"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..5ac396a03f
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,27 @@
+{
+    "type": "filament",
+    "filament_id": "GFN04",
+    "setting_id": "GFSN04_Qidi_10",
+    "name": "QIDI PAHT-CF @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PAHT-CF @Qidi",
+    "fan_cooling_layer_time": [
+        "10"
+    ],
+    "nozzle_temperature": [
+        "300"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "300"
+    ],
+    "pressure_advance": [
+        "0.032"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi.json b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi.json
index 55d432b880..d2639a618a 100644
--- a/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi.json	
+++ b/resources/profiles/Qidi/filament/QIDI PAHT-CF @Qidi.json	
@@ -31,7 +31,7 @@
         "40"
     ],
     "fan_cooling_layer_time": [
-        "5"
+        "10"
     ],
     "full_fan_speed_layer": [
         "0"
@@ -49,7 +49,7 @@
         "80"
     ],
     "slow_down_layer_time": [
-        "5"
+        "8"
     ],
     "filament_density":[
         "1.20"
diff --git a/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.4 nozzle.json
index 6e2764077c..4b65e7b97d 100644
--- a/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.4 nozzle.json	
@@ -18,6 +18,12 @@
     "slow_down_min_speed": [
         "20"
     ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "pressure_advance": [
+        "0.032"
+    ],
     "compatible_printers": [
         "Qidi Q1 Pro 0.4 nozzle"
     ]
diff --git a/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.6 nozzle.json
index 03fcb21a97..4978c588ba 100644
--- a/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi Q1 Pro 0.6 nozzle.json	
@@ -15,9 +15,6 @@
     "nozzle_temperature_initial_layer": [
         "280"
     ],
-    "overhang_fan_speed": [
-        "50"
-    ],
     "pressure_advance": [
         "0.025"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..669daceb46
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "filament_id": "GFT01",
+    "setting_id": "GFST01_Qidi_09",
+    "name": "QIDI PET-CF @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PET-CF @Qidi",
+    "fan_cooling_layer_time": [
+        "10"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "pressure_advance": [
+        "0.032"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..345c98b65c
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "filament_id": "GFT01",
+    "setting_id": "GFST01_Qidi_10",
+    "name": "QIDI PET-CF @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PET-CF @Qidi",
+    "fan_cooling_layer_time": [
+        "10"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "pressure_advance": [
+        "0.025"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..0ab853e84d
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "filament_id": "GFT01",
+    "setting_id": "GFST01_Qidi_11",
+    "name": "QIDI PET-CF @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PET-CF @Qidi",
+    "fan_cooling_layer_time": [
+        "10"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "pressure_advance": [
+        "0.025"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi.json b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi.json
index c86ab41964..2f19c2734b 100644
--- a/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi.json	
+++ b/resources/profiles/Qidi/filament/QIDI PET-CF @Qidi.json	
@@ -25,10 +25,10 @@
         "0%"
     ],
     "overhang_fan_speed": [
-        "100"
+        "40"
     ],
     "fan_cooling_layer_time": [
-        "5"
+        "10"
     ],
     "full_fan_speed_layer": [
         "0"
@@ -46,7 +46,7 @@
         "80"
     ],
     "slow_down_layer_time": [
-        "5"
+        "8"
     ],
     "filament_density":[
         "1.30"
diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi 0.2 nozzle.json
new file mode 100644
index 0000000000..307d84dde9
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi 0.2 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFT01",
+    "setting_id": "GFST01_Qidi_12",
+    "name": "QIDI PETG Tough @Qidi 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PETG Tough @Qidi",
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 0.2 nozzle",
+        "Qidi X-Max 0.2 nozzle",
+        "Qidi X-CF Pro 0.2 nozzle",
+		"Qidi X-Smart 3 0.2 nozzle",
+		"Qidi X-Plus 3 0.2 nozzle",
+		"Qidi X-Max 3 0.2 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.4 nozzle.json
index 37818a9de4..7b2ef159e1 100644
--- a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.4 nozzle.json	
@@ -10,7 +10,7 @@
         "13"
     ],
     "pressure_advance": [
-        "0.086"
+        "0.042"
     ],
     "compatible_printers": [
         "Qidi Q1 Pro 0.4 nozzle"
diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.6 nozzle.json
index 61259f45b5..5d8881a642 100644
--- a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.6 nozzle.json	
@@ -9,6 +9,9 @@
     "filament_max_volumetric_speed": [
         "13"
     ],
+    "pressure_advance": [
+        "0.032"
+    ],
     "compatible_printers": [
         "Qidi Q1 Pro 0.6 nozzle"
     ]
diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.8 nozzle.json
index 7cd25c2eaa..f884cc73f5 100644
--- a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi Q1 Pro 0.8 nozzle.json	
@@ -10,7 +10,7 @@
         "13"
     ],
     "pressure_advance": [
-        "0.04"
+        "0.024"
     ],
     "compatible_printers": [
         "Qidi Q1 Pro 0.8 nozzle"
diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi X-Plus 4 0.2 nozzle.json
new file mode 100644
index 0000000000..ae25f79ad0
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi X-Plus 4 0.2 nozzle.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "filament_id": "GFT01",
+    "setting_id": "GFST01_Qidi_13",
+    "name": "QIDI PETG Tough @Qidi X-Plus 4 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PETG Tough @Qidi",
+    "filament_max_volumetric_speed": [
+        "1"
+    ],
+    "pressure_advance": [
+        "0.056"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.2 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..bde394fb57
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "filament_id": "GFT01",
+    "setting_id": "GFST01_Qidi_14",
+    "name": "QIDI PETG Tough @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PETG Tough @Qidi",
+    "filament_max_volumetric_speed": [
+        "13"
+    ],
+    "pressure_advance": [
+        "0.056"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..d763a7a627
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "filament_id": "GFT01",
+    "setting_id": "GFST01_Qidi_15",
+    "name": "QIDI PETG Tough @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PETG Tough @Qidi",
+    "filament_max_volumetric_speed": [
+        "13"
+    ],
+    "pressure_advance": [
+        "0.032"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..e7b5af5604
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,18 @@
+{
+    "type": "filament",
+    "filament_id": "GFT01",
+    "setting_id": "GFST01_Qidi_16",
+    "name": "QIDI PETG Tough @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PETG Tough @Qidi",
+    "filament_max_volumetric_speed": [
+        "13"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi.json b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi.json
index e3f6335ad2..525172df62 100644
--- a/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi.json	
+++ b/resources/profiles/Qidi/filament/QIDI PETG Tough @Qidi.json	
@@ -16,10 +16,10 @@
         "30"
     ],
     "overhang_fan_speed": [
-        "100"
+        "90"
     ],
     "overhang_fan_threshold": [
-        "25%"
+        "10%"
     ],
     "fan_max_speed": [
         "40"
@@ -55,12 +55,6 @@
         "1.24"
     ],
 	"compatible_printers": [
-        "Qidi X-Plus 0.2 nozzle",
-        "Qidi X-Max 0.2 nozzle",
-        "Qidi X-CF Pro 0.2 nozzle",
-		"Qidi X-Smart 3 0.2 nozzle",
-		"Qidi X-Plus 3 0.2 nozzle",
-		"Qidi X-Max 3 0.2 nozzle",
         "Qidi X-Plus 0.4 nozzle",
         "Qidi X-Max 0.4 nozzle",
         "Qidi X-CF Pro 0.4 nozzle",
@@ -72,6 +66,12 @@
         "Qidi X-CF Pro 0.6 nozzle",
 		"Qidi X-Smart 3 0.6 nozzle",
 		"Qidi X-Plus 3 0.6 nozzle",
-		"Qidi X-Max 3 0.6 nozzle"
+		"Qidi X-Max 3 0.6 nozzle",
+        "Qidi X-Plus 0.8 nozzle",
+        "Qidi X-Max 0.8 nozzle",
+        "Qidi X-CF Pro 0.8 nozzle",
+		"Qidi X-Smart 3 0.8 nozzle",
+		"Qidi X-Plus 3 0.8 nozzle",
+		"Qidi X-Max 3 0.8 nozzle"
 	]
 }
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi 0.2 nozzle.json
new file mode 100644
index 0000000000..25ded05009
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi 0.2 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_16",
+    "name": "QIDI PLA Rapido @Qidi 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido @Qidi",
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.2 nozzle",
+        "Qidi X-Max 0.2 nozzle",
+        "Qidi X-CF Pro 0.2 nozzle",
+		"Qidi X-Smart 3 0.2 nozzle",
+		"Qidi X-Plus 3 0.2 nozzle",
+		"Qidi X-Max 3 0.2 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi 0.6 nozzle.json
new file mode 100644
index 0000000000..156f304403
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi 0.6 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_17",
+    "name": "QIDI PLA Rapido @Qidi 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido @Qidi",
+    "pressure_advance": [
+        "0.016"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.6 nozzle",
+        "Qidi X-Max 0.6 nozzle",
+        "Qidi X-CF Pro 0.6 nozzle",
+		"Qidi X-Smart 3 0.6 nozzle",
+		"Qidi X-Plus 3 0.6 nozzle",
+		"Qidi X-Max 3 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi 0.8 nozzle.json
new file mode 100644
index 0000000000..e9c224a872
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi 0.8 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_18",
+    "name": "QIDI PLA Rapido @Qidi 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido @Qidi",
+    "pressure_advance": [
+        "0.008"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.8 nozzle",
+        "Qidi X-Max 0.8 nozzle",
+        "Qidi X-CF Pro 0.8 nozzle",
+		"Qidi X-Smart 3 0.8 nozzle",
+		"Qidi X-Plus 3 0.8 nozzle",
+		"Qidi X-Max 3 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle.json
index 6ac6df0a2a..433cf7acf3 100644
--- a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.2 nozzle.json	
@@ -12,9 +12,6 @@
     "additional_cooling_fan_speed": [
         "0"
     ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
     "during_print_exhaust_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.4 nozzle.json
index 3c3b18e988..eb23acf8d7 100644
--- a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.4 nozzle.json	
@@ -12,9 +12,6 @@
     "additional_cooling_fan_speed": [
         "0"
     ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
     "during_print_exhaust_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.6 nozzle.json
index a56f76220f..d009ac064c 100644
--- a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.6 nozzle.json	
@@ -12,9 +12,6 @@
     "additional_cooling_fan_speed": [
         "0"
     ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
     "during_print_exhaust_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.8 nozzle.json
index 10eb0385d5..9bba0bd455 100644
--- a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi Q1 Pro 0.8 nozzle.json	
@@ -12,9 +12,6 @@
     "additional_cooling_fan_speed": [
         "0"
     ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
     "during_print_exhaust_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi X-Plus 4 0.2 nozzle.json
new file mode 100644
index 0000000000..93df78d85d
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi X-Plus 4 0.2 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_19",
+    "name": "QIDI PLA Rapido @Qidi X-Plus 4 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.034"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.2 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..03943fa258
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_20",
+    "name": "QIDI PLA Rapido @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.034"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..dd3bd56d7e
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_21",
+    "name": "QIDI PLA Rapido @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.016"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..d7c07eca1b
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_22",
+    "name": "QIDI PLA Rapido @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.008"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi 0.2 nozzle.json
new file mode 100644
index 0000000000..b8c0b94e82
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi 0.2 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_23",
+    "name": "QIDI PLA Rapido Matte @Qidi 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Matte @Qidi",
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.2 nozzle",
+        "Qidi X-Max 0.2 nozzle",
+        "Qidi X-CF Pro 0.2 nozzle",
+		"Qidi X-Smart 3 0.2 nozzle",
+		"Qidi X-Plus 3 0.2 nozzle",
+		"Qidi X-Max 3 0.2 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi 0.6 nozzle.json
new file mode 100644
index 0000000000..c8a0851959
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi 0.6 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_24",
+    "name": "QIDI PLA Rapido Matte @Qidi 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Matte @Qidi",
+    "pressure_advance": [
+        "0.016"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.6 nozzle",
+        "Qidi X-Max 0.6 nozzle",
+        "Qidi X-CF Pro 0.6 nozzle",
+		"Qidi X-Smart 3 0.6 nozzle",
+		"Qidi X-Plus 3 0.6 nozzle",
+		"Qidi X-Max 3 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi 0.8 nozzle.json
new file mode 100644
index 0000000000..d3a914462f
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi 0.8 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_25",
+    "name": "QIDI PLA Rapido Matte @Qidi 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Matte @Qidi",
+    "pressure_advance": [
+        "0.008"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.8 nozzle",
+        "Qidi X-Max 0.8 nozzle",
+        "Qidi X-CF Pro 0.8 nozzle",
+		"Qidi X-Smart 3 0.8 nozzle",
+		"Qidi X-Plus 3 0.8 nozzle",
+		"Qidi X-Max 3 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.2 nozzle.json
index 32884b438d..32e1eb5955 100644
--- a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.2 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.2 nozzle.json	
@@ -12,9 +12,6 @@
     "additional_cooling_fan_speed": [
         "0"
     ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
     "during_print_exhaust_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.4 nozzle.json
index a130d13398..50d51e1436 100644
--- a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.4 nozzle.json	
@@ -12,9 +12,6 @@
     "additional_cooling_fan_speed": [
         "0"
     ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
     "during_print_exhaust_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.6 nozzle.json
index b33c386572..c7b7b34d3a 100644
--- a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.6 nozzle.json	
@@ -12,9 +12,6 @@
     "additional_cooling_fan_speed": [
         "0"
     ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
     "during_print_exhaust_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.8 nozzle.json
index 35e8254b91..b839e894e5 100644
--- a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi Q1 Pro 0.8 nozzle.json	
@@ -12,9 +12,6 @@
     "additional_cooling_fan_speed": [
         "0"
     ],
-    "close_fan_the_first_x_layers": [
-        "3"
-    ],
     "during_print_exhaust_fan_speed": [
         "100"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.2 nozzle.json
new file mode 100644
index 0000000000..089e1b8acc
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.2 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_26",
+    "name": "QIDI PLA Rapido Matte @Qidi X-Plus 4 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Matte @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.034"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.2 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..b9aae304f3
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_27",
+    "name": "QIDI PLA Rapido Matte @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Matte @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.034"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..100b20dcc9
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_28",
+    "name": "QIDI PLA Rapido Matte @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Matte @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.016"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..1e0f5e76e9
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Matte @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_29",
+    "name": "QIDI PLA Rapido Matte @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Matte @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.008"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi 0.2 nozzle.json
new file mode 100644
index 0000000000..88b0d9fcb2
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi 0.2 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_34",
+    "name": "QIDI PLA Rapido Metal @Qidi 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Metal @Qidi",
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.2 nozzle",
+        "Qidi X-Max 0.2 nozzle",
+        "Qidi X-CF Pro 0.2 nozzle",
+		"Qidi X-Smart 3 0.2 nozzle",
+		"Qidi X-Plus 3 0.2 nozzle",
+		"Qidi X-Max 3 0.2 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi 0.6 nozzle.json
new file mode 100644
index 0000000000..892b625f34
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi 0.6 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_35",
+    "name": "QIDI PLA Rapido Metal @Qidi 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Metal @Qidi",
+    "pressure_advance": [
+        "0.02"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.6 nozzle",
+        "Qidi X-Max 0.6 nozzle",
+        "Qidi X-CF Pro 0.6 nozzle",
+		"Qidi X-Smart 3 0.6 nozzle",
+		"Qidi X-Plus 3 0.6 nozzle",
+		"Qidi X-Max 3 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi 0.8 nozzle.json
new file mode 100644
index 0000000000..9eb2a5640a
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi 0.8 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_36",
+    "name": "QIDI PLA Rapido Metal @Qidi 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Metal @Qidi",
+    "pressure_advance": [
+        "0.01"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.8 nozzle",
+        "Qidi X-Max 0.8 nozzle",
+        "Qidi X-CF Pro 0.8 nozzle",
+		"Qidi X-Smart 3 0.8 nozzle",
+		"Qidi X-Plus 3 0.8 nozzle",
+		"Qidi X-Max 3 0.8 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.2 nozzle.json
new file mode 100644
index 0000000000..cf00ab623b
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.2 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_37",
+    "name": "QIDI PLA Rapido Metal @Qidi Q1 Pro 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Metal @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.042"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi Q1 Pro 0.2 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.4 nozzle.json
new file mode 100644
index 0000000000..809709b8c5
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.4 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_38",
+    "name": "QIDI PLA Rapido Metal @Qidi Q1 Pro 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Metal @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.042"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi Q1 Pro 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.6 nozzle.json
new file mode 100644
index 0000000000..0b9132f4ee
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.6 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_39",
+    "name": "QIDI PLA Rapido Metal @Qidi Q1 Pro 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Metal @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.016"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi Q1 Pro 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.8 nozzle.json
new file mode 100644
index 0000000000..9360948e8d
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi Q1 Pro 0.8 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_40",
+    "name": "QIDI PLA Rapido Metal @Qidi Q1 Pro 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Metal @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.008"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi Q1 Pro 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.2 nozzle.json
new file mode 100644
index 0000000000..5020fcc6d4
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.2 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_41",
+    "name": "QIDI PLA Rapido Metal @Qidi X-Plus 4 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Metal @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.038"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.2 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..9fb602914f
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_42",
+    "name": "QIDI PLA Rapido Metal @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Metal @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.038"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..3668e7db95
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_43",
+    "name": "QIDI PLA Rapido Metal @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Metal @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.02"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..217390f247
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,45 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_44",
+    "name": "QIDI PLA Rapido Metal @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Metal @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_max_volumetric_speed": [
+        "24.5"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "hot_plate_temp": [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "60"
+    ],
+    "nozzle_temperature": [
+        "210"
+    ],
+    "pressure_advance": [
+        "0.01"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi.json
new file mode 100644
index 0000000000..efd4db3b20
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Metal @Qidi.json	
@@ -0,0 +1,32 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_33",
+    "name": "QIDI PLA Rapido Metal @Qidi",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pla",
+	"filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "pressure_advance": [
+        "0.038"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.4 nozzle",
+        "Qidi X-Max 0.4 nozzle",
+        "Qidi X-CF Pro 0.4 nozzle",
+		"Qidi X-Smart 3 0.4 nozzle",
+		"Qidi X-Plus 3 0.4 nozzle",
+		"Qidi X-Max 3 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi 0.6 nozzle.json
new file mode 100644
index 0000000000..861a93b4c8
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi 0.6 nozzle.json	
@@ -0,0 +1,20 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_46",
+    "name": "QIDI PLA Rapido Silk @Qidi 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Silk @Qidi",
+    "pressure_advance": [
+        "0.016"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.6 nozzle",
+        "Qidi X-Max 0.6 nozzle",
+        "Qidi X-CF Pro 0.6 nozzle",
+		"Qidi X-Smart 3 0.6 nozzle",
+		"Qidi X-Plus 3 0.6 nozzle",
+		"Qidi X-Max 3 0.6 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi Q1 Pro 0.4 nozzle.json
new file mode 100644
index 0000000000..54c919ed7c
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi Q1 Pro 0.4 nozzle.json	
@@ -0,0 +1,39 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_47",
+    "name": "QIDI PLA Rapido Silk @Qidi Q1 Pro 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Silk @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "pressure_advance": [
+        "0.034"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "compatible_printers": [
+        "Qidi Q1 Pro 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi Q1 Pro 0.6 nozzle.json
new file mode 100644
index 0000000000..7e33b21709
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi Q1 Pro 0.6 nozzle.json	
@@ -0,0 +1,39 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_48",
+    "name": "QIDI PLA Rapido Silk @Qidi Q1 Pro 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Silk @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "pressure_advance": [
+        "0.024"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi Q1 Pro 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..b593c095fb
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,39 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_49",
+    "name": "QIDI PLA Rapido Silk @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Silk @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "pressure_advance": [
+        "0.034"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..f2c0df3c5f
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,39 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_50",
+    "name": "QIDI PLA Rapido Silk @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA Rapido Silk @Qidi",
+    "activate_air_filtration": [
+        "1"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "during_print_exhaust_fan_speed": [
+        "100"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "full_fan_speed_layer": [
+        "3"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "pressure_advance": [
+        "0.021"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi.json b/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi.json
new file mode 100644
index 0000000000..bf52e6c279
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA Rapido Silk @Qidi.json	
@@ -0,0 +1,44 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_45",
+    "name": "QIDI PLA Rapido Silk @Qidi",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pla",
+	"filament_flow_ratio": [
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "7.5"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "pressure_advance": [
+        "0.031"
+    ],
+    "nozzle_temperature": [
+        "230"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "230"
+    ],
+    "hot_plate_temp" : [
+        "55"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "55"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.4 nozzle",
+        "Qidi X-Max 0.4 nozzle",
+        "Qidi X-CF Pro 0.4 nozzle",
+		"Qidi X-Smart 3 0.4 nozzle",
+		"Qidi X-Plus 3 0.4 nozzle",
+		"Qidi X-Max 3 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.4 nozzle.json
index 112cb6b8f7..e752ab93bf 100644
--- a/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.4 nozzle.json	
@@ -6,12 +6,9 @@
     "from": "system",
     "instantiation": "true",
     "inherits": "QIDI PLA-CF @Qidi",
-    "extrusion_multiplier": [
+    "filament_flow_ratio": [
         "0.93"
     ],
-    "first_layer_temperature": [
-        "220"
-    ],
     "filament_max_volumetric_speed": [
         "15"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.6 nozzle.json
index b89513789f..0765557e68 100644
--- a/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.6 nozzle.json	
@@ -6,12 +6,9 @@
     "from": "system",
     "instantiation": "true",
     "inherits": "QIDI PLA-CF @Qidi",
-    "extrusion_multiplier": [
+    "filament_flow_ratio": [
         "0.93"
     ],
-    "first_layer_temperature": [
-        "220"
-    ],
     "filament_max_volumetric_speed": [
         "15"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.8 nozzle.json
index bcae5ff8db..b0a2970e21 100644
--- a/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi Q1 Pro 0.8 nozzle.json	
@@ -6,12 +6,9 @@
     "from": "system",
     "instantiation": "true",
     "inherits": "QIDI PLA-CF @Qidi",
-    "extrusion_multiplier": [
+    "filament_flow_ratio": [
         "0.93"
     ],
-    "first_layer_temperature": [
-        "220"
-    ],
     "filament_max_volumetric_speed": [
         "18"
     ],
diff --git a/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..f577279307
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_30",
+    "name": "QIDI PLA-CF @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA-CF @Qidi",
+    "filament_flow_ratio": [
+        "0.93"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "pressure_advance": [
+        "0.034"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..154294cbc7
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_31",
+    "name": "QIDI PLA-CF @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA-CF @Qidi",
+    "filament_flow_ratio": [
+        "0.93"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "pressure_advance": [
+        "0.012"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..fd3f06a017
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFA00",
+    "setting_id": "GFSA00_Qidi_32",
+    "name": "QIDI PLA-CF @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PLA-CF @Qidi",
+    "filament_flow_ratio": [
+        "0.93"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "pressure_advance": [
+        "0.008"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi.json b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi.json
index 29da84718a..b1a2a5f6df 100644
--- a/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi.json	
+++ b/resources/profiles/Qidi/filament/QIDI PLA-CF @Qidi.json	
@@ -15,18 +15,15 @@
 	"filament_max_volumetric_speed": [
 		"9"
 	],
-	"temperature": [
-		"230"
-	],
-	"first_layer_temperature": [
-		"230"
-	],
+	"nozzle_temperature": [
+        "220"
+    ],
+	"nozzle_temperature_initial_layer": [
+        "220"
+    ],
 	"filament_density": [
 		"1.25"
 	],
-	"extrusion_multiplier": [
-		"0.96"
-	],
 	"advance_pressure": [
 		"0.02"
 	],
diff --git a/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi 0.6 nozzle.json
new file mode 100644
index 0000000000..22d6e81beb
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi 0.6 nozzle.json	
@@ -0,0 +1,28 @@
+{
+    "type": "filament",
+    "filament_id": "GFT02",
+    "setting_id": "GFST02_Qidi_07",
+    "name": "QIDI PPS-CF @Qidi 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PPS-CF @Qidi",
+    "nozzle_temperature": [
+        "320"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "320"
+    ],
+    "pressure_advance": [
+        "0.021"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Max 0.6 nozzle",
+        "Qidi X-CF Pro 0.6 nozzle",
+        "Qidi X-Smart 3 0.6 nozzle",
+        "Qidi X-Plus 3 0.6 nozzle",
+        "Qidi X-Max 3 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi 0.8 nozzle.json
new file mode 100644
index 0000000000..1941969a04
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi 0.8 nozzle.json	
@@ -0,0 +1,29 @@
+{
+    "type": "filament",
+    "filament_id": "GFT02",
+    "setting_id": "GFST02_Qidi_08",
+    "name": "QIDI PPS-CF @Qidi 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PPS-CF @Qidi",
+    "nozzle_temperature": [
+        "320"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "320"
+    ],
+    "pressure_advance": [
+        "0.008"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 0.8 nozzle",
+        "Qidi X-Max 0.8 nozzle",
+        "Qidi X-CF Pro 0.8 nozzle",
+        "Qidi X-Smart 3 0.8 nozzle",
+        "Qidi X-Plus 3 0.8 nozzle",
+        "Qidi X-Max 3 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi Q1 Pro 0.4 nozzle.json
new file mode 100644
index 0000000000..50e0a1183c
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi Q1 Pro 0.4 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFT02",
+    "setting_id": "GFST02_Qidi_01",
+    "name": "QIDI PPS-CF @Qidi Q1 Pro 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PPS-CF @Qidi",
+    "nozzle_temperature": [
+        "320"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "320"
+    ],
+    "pressure_advance": [
+        "0.03"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi Q1 Pro 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi Q1 Pro 0.6 nozzle.json
new file mode 100644
index 0000000000..e5d34f4a1e
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi Q1 Pro 0.6 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFT02",
+    "setting_id": "GFST02_Qidi_02",
+    "name": "QIDI PPS-CF @Qidi Q1 Pro 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PPS-CF @Qidi",
+    "nozzle_temperature": [
+        "320"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "320"
+    ],
+    "pressure_advance": [
+        "0.019"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi Q1 Pro 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi Q1 Pro 0.8 nozzle.json
new file mode 100644
index 0000000000..fbef676382
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi Q1 Pro 0.8 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFT02",
+    "setting_id": "GFST02_Qidi_03",
+    "name": "QIDI PPS-CF @Qidi Q1 Pro 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PPS-CF @Qidi",
+    "nozzle_temperature": [
+        "320"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "320"
+    ],
+    "pressure_advance": [
+        "0.008"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi Q1 Pro 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..2c001211a9
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFT02",
+    "setting_id": "GFST02_Qidi_04",
+    "name": "QIDI PPS-CF @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PPS-CF @Qidi",
+    "nozzle_temperature": [
+        "320"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "320"
+    ],
+    "pressure_advance": [
+        "0.03"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..dff54cd573
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFT02",
+    "setting_id": "GFST02_Qidi_05",
+    "name": "QIDI PPS-CF @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PPS-CF @Qidi",
+    "nozzle_temperature": [
+        "320"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "320"
+    ],
+    "pressure_advance": [
+        "0.021"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..9ff732c98d
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,24 @@
+{
+    "type": "filament",
+    "filament_id": "GFT02",
+    "setting_id": "GFST02_Qidi_06",
+    "name": "QIDI PPS-CF @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI PPS-CF @Qidi",
+    "nozzle_temperature": [
+        "320"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "320"
+    ],
+    "pressure_advance": [
+        "0.008"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 4 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi.json b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi.json
new file mode 100644
index 0000000000..3e0fd77d97
--- /dev/null
+++ b/resources/profiles/Qidi/filament/QIDI PPS-CF @Qidi.json	
@@ -0,0 +1,71 @@
+{
+    "type": "filament",
+    "filament_id": "GFT02",
+    "setting_id": "GFST02_Qidi_00",
+    "name": "QIDI PPS-CF @Qidi",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_pa",
+    "filament_type": [
+        "PA-CF"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "320"
+    ],
+    "nozzle_temperature": [
+        "320"
+    ],
+    "filament_max_volumetric_speed": [
+        "6"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "fan_min_speed": [
+        "0"
+    ],
+    "overhang_fan_threshold": [
+        "0%"
+    ],
+    "overhang_fan_speed": [
+        "40"
+    ],
+    "fan_cooling_layer_time": [
+        "5"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "pressure_advance": [
+        "0.03"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "110"
+    ],
+    "hot_plate_temp" : [
+        "110"
+    ],
+    "slow_down_layer_time": [
+        "2"
+    ],
+    "filament_density":[
+        "1.20"
+    ],
+    "filament_flow_ratio": [
+        "0.97"
+    ],
+    "chamber_temperatures" : [
+        "60"
+    ],
+    "compatible_printers": [
+        "Qidi X-Plus 0.4 nozzle",
+        "Qidi X-Max 0.4 nozzle",
+        "Qidi X-CF Pro 0.4 nozzle",
+        "Qidi X-Smart 3 0.4 nozzle",
+        "Qidi X-Plus 3 0.4 nozzle",
+        "Qidi X-Max 3 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/filament/QIDI TPU 95A-HF @Qidi.json b/resources/profiles/Qidi/filament/QIDI TPU 95A-HF @Qidi.json
index f9a067ed9c..745706a692 100644
--- a/resources/profiles/Qidi/filament/QIDI TPU 95A-HF @Qidi.json	
+++ b/resources/profiles/Qidi/filament/QIDI TPU 95A-HF @Qidi.json	
@@ -39,6 +39,9 @@
         "Qidi X-Smart 3 0.8 nozzle",
         "Qidi X-Plus 3 0.8 nozzle",
         "Qidi X-Max 3 0.8 nozzle",
-        "Qidi Q1 Pro 0.6 nozzle"
+        "Qidi Q1 Pro 0.6 nozzle",
+        "Qidi X-Plus 4 0.4 nozzle",
+        "Qidi X-Plus 4 0.6 nozzle",
+        "Qidi X-Plus 4 0.8 nozzle"
 	]
 }
diff --git a/resources/profiles/Qidi/filament/fdm_filament_abs.json b/resources/profiles/Qidi/filament/fdm_filament_abs.json
index d0d479065e..f732d5dcb4 100644
--- a/resources/profiles/Qidi/filament/fdm_filament_abs.json
+++ b/resources/profiles/Qidi/filament/fdm_filament_abs.json
@@ -38,7 +38,7 @@
         "3"
     ],
     "fan_cooling_layer_time": [
-        "30"
+        "60"
     ],
     "filament_max_volumetric_speed": [
         "20"
@@ -59,10 +59,10 @@
         "1"
     ],
     "fan_max_speed": [
-        "50"
+        "80"
     ],
     "fan_min_speed": [
-        "20"
+        "10"
     ],
     "overhang_fan_threshold": [
         "25%"
@@ -83,7 +83,7 @@
         "270"
     ],
     "slow_down_min_speed": [
-        "10"
+        "20"
     ],
     "slow_down_layer_time": [
         "4"
diff --git a/resources/profiles/Qidi/filament/fdm_filament_asa.json b/resources/profiles/Qidi/filament/fdm_filament_asa.json
index 10cf7092a0..6733a15cf8 100644
--- a/resources/profiles/Qidi/filament/fdm_filament_asa.json
+++ b/resources/profiles/Qidi/filament/fdm_filament_asa.json
@@ -38,7 +38,7 @@
         "3"
     ],
     "fan_cooling_layer_time": [
-        "35"
+        "40"
     ],
     "filament_max_volumetric_speed": [
         "15"
@@ -83,9 +83,9 @@
         "280"
     ],
     "slow_down_min_speed": [
-        "10"
+        "20"
     ],
     "slow_down_layer_time": [
-        "3"
+        "4"
     ]
 }
diff --git a/resources/profiles/Qidi/filament/fdm_filament_common.json b/resources/profiles/Qidi/filament/fdm_filament_common.json
index d04f771b95..9f34554a5a 100644
--- a/resources/profiles/Qidi/filament/fdm_filament_common.json
+++ b/resources/profiles/Qidi/filament/fdm_filament_common.json
@@ -43,7 +43,7 @@
         "1"
     ],
     "reduce_fan_stop_start_freq": [
-        "0"
+        "1"
     ],
     "fan_cooling_layer_time": [
         "60"
@@ -144,5 +144,8 @@
     "activate_chamber_temp_control": [
         "0"
     ],
+    "enable_pressure_advance": [
+        "1"
+    ],
     "compatible_printers": []
 }
diff --git a/resources/profiles/Qidi/filament/fdm_filament_pa.json b/resources/profiles/Qidi/filament/fdm_filament_pa.json
index 1e880d9d71..69aee4b1ab 100644
--- a/resources/profiles/Qidi/filament/fdm_filament_pa.json
+++ b/resources/profiles/Qidi/filament/fdm_filament_pa.json
@@ -56,7 +56,7 @@
         "290"
     ],
     "reduce_fan_stop_start_freq": [
-        "0"
+        "1"
     ],
     "fan_max_speed": [
         "60"
@@ -65,7 +65,7 @@
         "0"
     ],
     "overhang_fan_speed": [
-        "30"
+        "50"
     ],
     "nozzle_temperature": [
         "290"
@@ -77,10 +77,10 @@
         "260"
     ],
     "nozzle_temperature_range_high": [
-        "300"
+        "350"
     ],
     "slow_down_min_speed": [
-        "10"
+        "20"
     ],
     "slow_down_layer_time": [
         "2"
diff --git a/resources/profiles/Qidi/filament/fdm_filament_pet.json b/resources/profiles/Qidi/filament/fdm_filament_pet.json
index a41d223fb0..2801c01a78 100644
--- a/resources/profiles/Qidi/filament/fdm_filament_pet.json
+++ b/resources/profiles/Qidi/filament/fdm_filament_pet.json
@@ -23,7 +23,7 @@
         "80"
     ],
     "hot_plate_temp_initial_layer" : [
-        "70"
+        "80"
     ],
     "textured_plate_temp_initial_layer" : [
         "80"
@@ -75,5 +75,8 @@
     ],
     "nozzle_temperature_range_high": [
         "260"
+    ],
+    "slow_down_min_speed": [
+        "20"
     ]
 }
diff --git a/resources/profiles/Qidi/filament/fdm_filament_pla.json b/resources/profiles/Qidi/filament/fdm_filament_pla.json
index 24bbf363bf..09de579dc8 100644
--- a/resources/profiles/Qidi/filament/fdm_filament_pla.json
+++ b/resources/profiles/Qidi/filament/fdm_filament_pla.json
@@ -5,7 +5,7 @@
     "instantiation": "false",
     "inherits": "fdm_filament_common",
     "fan_cooling_layer_time": [
-        "100"
+        "60"
     ],
     "filament_max_volumetric_speed": [
         "12"
@@ -62,25 +62,25 @@
         "100"
     ],
     "overhang_fan_threshold": [
-        "50%"
+        "95%"
     ],
     "close_fan_the_first_x_layers": [
-        "2"
+        "1"
     ],
-        "full_fan_speed_layer": [
-        "0"
+    "full_fan_speed_layer": [
+        "3"
     ],
     "nozzle_temperature": [
         "220"
     ],
     "temperature_vitrification": [
-        "60"
+        "45"
     ],
     "nozzle_temperature_range_low": [
         "190"
     ],
     "nozzle_temperature_range_high": [
-        "230"
+        "240"
     ],
     "slow_down_min_speed": [
         "20"
@@ -90,5 +90,9 @@
     ],
     "additional_cooling_fan_speed": [
         "0"
+    ],
+    "enable_overhang_bridge_fan": [
+        "0"
     ]
+
 }
diff --git a/resources/profiles/Qidi/filament/fdm_filament_tpu.json b/resources/profiles/Qidi/filament/fdm_filament_tpu.json
index e182ee1c3f..f924f2cbf2 100644
--- a/resources/profiles/Qidi/filament/fdm_filament_tpu.json
+++ b/resources/profiles/Qidi/filament/fdm_filament_tpu.json
@@ -11,10 +11,10 @@
         "50"
     ],
     "hot_plate_temp" : [
-        "50"
+        "60"
     ],
     "textured_plate_temp" : [
-        "50"
+        "60"
     ],
     "cool_plate_temp_initial_layer" : [
         "05"
@@ -23,13 +23,13 @@
         "50"
     ],
     "hot_plate_temp_initial_layer" : [
-        "50"
+        "60"
     ],
     "textured_plate_temp_initial_layer" : [
         "50"
     ],
     "fan_cooling_layer_time": [
-        "100"
+        "60"
     ],
     "filament_max_volumetric_speed": [
         "15"
@@ -43,9 +43,6 @@
     "filament_cost": [
         "40"
     ],
-    "filament_retraction_length": [
-        "1"
-    ],
     "nozzle_temperature_initial_layer": [
         "230"
     ],
@@ -65,7 +62,7 @@
         "100"
     ],
     "additional_cooling_fan_speed": [
-        "70"
+        "0"
     ],
     "close_fan_the_first_x_layers": [
         "1"
@@ -74,12 +71,18 @@
         "230"
     ],
     "temperature_vitrification": [
-        "99"
+        "30"
     ],
     "nozzle_temperature_range_low": [
-        "205"
+        "200"
     ],
     "nozzle_temperature_range_high": [
         "250"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "enable_overhang_bridge_fan": [
+        "0"
     ]
 }
diff --git a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.2 nozzle.json
index c90a385abc..7a923fa4c5 100644
--- a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.2 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.2 nozzle.json	
@@ -11,7 +11,7 @@
     "printer_model": "Qidi Q1 Pro",
     "printer_variant": "0.2",
     "default_filament_profile": [
-        "Qidi Generic PLA @Qidi Q1 Pro 0.2 nozzle"
+        "Generic PLA @Qidi Q1 Pro 0.2 nozzle"
     ],
     "default_print_profile": "0.10mm Standard @Qidi Q1 Pro 0.2 nozzle",
     "max_layer_height": [
diff --git a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json
index ad6cfc8336..314b859552 100644
--- a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json	
@@ -51,21 +51,39 @@
 	],
 	"retract_before_wipe": [
         "0%"
+    ],
+	"retract_lift_below": [
+        "239"
     ],
     "wipe_distance": [
         "2"],
-	"single_extruder_multi_material": "0",
+	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M0",
     "thumbnails": [
         "160x160",
         "112x112"
     ],
+	"machine_max_jerk_e": [
+        "2"
+    ],
+    "machine_max_jerk_x": [
+        "8"
+    ],
+    "machine_max_jerk_y": [
+        "8"
+    ],
+    "machine_max_jerk_z": [
+        "3"
+    ],
+	"extruder_clearance_max_radius": "70",
+    "extruder_clearance_height_to_rod": "40",
+    "extruder_clearance_height_to_lid": "120",
 	"layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nLOG_Z\nG92 E0\n",
 	"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{min(max_print_height, max_layer_z + 3)} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
     "machine_start_gcode": "PRINT_START BED=[hot_plate_temp_initial_layer] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperatures]\nM83\nM140 S[hot_plate_temp_initial_layer]\nM104 S[nozzle_temperature_initial_layer]\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\n",
     "thumbnails_format": "PNG",
 	"default_filament_profile": [
-		"Qidi Generic PLA @Qidi Q1 Pro 0.4 nozzle"
+		"Generic PLA @Qidi Q1 Pro 0.4 nozzle"
 	]
 }
\ No newline at end of file
diff --git a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.6 nozzle.json
index 9ef265e6c1..7eb5da89f6 100644
--- a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.6 nozzle.json	
@@ -11,7 +11,7 @@
     "printer_model": "Qidi Q1 Pro",
     "printer_variant": "0.6",
     "default_filament_profile": [
-        "Qidi Generic PLA @Qidi Q1 Pro 0.6 nozzle"
+        "Generic PLA @Qidi Q1 Pro 0.6 nozzle"
     ],
     "default_print_profile": "0.30mm Standard @Qidi Q1 Pro 0.6 nozzle",
     "max_layer_height": [
diff --git a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.8 nozzle.json
index cb632d5cc3..a05327d4c6 100644
--- a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.8 nozzle.json	
@@ -11,7 +11,7 @@
     "printer_model": "Qidi Q1 Pro",
     "printer_variant": "0.8",
     "default_filament_profile": [
-        "Qidi Generic PLA @Qidi Q1 Pro 0.8 nozzle"
+        "Generic PLA @Qidi Q1 Pro 0.8 nozzle"
     ],
     "default_print_profile": "0.40mm Standard @Qidi Q1 Pro 0.8 nozzle",
     "max_layer_height": [
diff --git a/resources/profiles/Qidi/machine/Qidi Q1 Pro.json b/resources/profiles/Qidi/machine/Qidi Q1 Pro.json
index 64da7a27df..3868f06b0a 100644
--- a/resources/profiles/Qidi/machine/Qidi Q1 Pro.json	
+++ b/resources/profiles/Qidi/machine/Qidi Q1 Pro.json	
@@ -6,7 +6,6 @@
     "machine_tech": "FFF",
     "family": "Qidi",
     "bed_model": "qidi_Q1Pro_buildplate_model.stl",
-    "bed_texture": "qidi_Q1Pro_buildplate_texture.png",
     "hotend_model": "qidi_xseries_gen3_hotend.stl",
 	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PET-CF;QIDI PA12-CF;QIDI PAHT-CF;QIDI ABS-GF25;QIDI PA-Ultra;Qidi Generic ASA;Qidi Generic ABS;Qidi Generic PA-CF;Qidi Generic PA;Qidi Generic PC;Qidi Generic PETG-CF;Qidi Generic PETG;Qidi Generic PLA Silk;Qidi Generic PLA;Qidi Generic TPU 95A"
 }
diff --git a/resources/profiles/Qidi/machine/Qidi X-CF Pro.json b/resources/profiles/Qidi/machine/Qidi X-CF Pro.json
index 6af5177cc7..4649e7c39e 100644
--- a/resources/profiles/Qidi/machine/Qidi X-CF Pro.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-CF Pro.json	
@@ -6,7 +6,6 @@
     "machine_tech": "FFF",
     "family": "Qidi",
     "bed_model": "qidi_xcfpro_buildplate_model.stl",
-    "bed_texture": "qidi_xcfpro_buildplate_texture.png",
     "hotend_model": "qidi_xseries_gen2_hotend.stl",
 	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PET-CF;QIDI PA12-CF;QIDI PAHT-CF;QIDI ABS-GF25;QIDI PA-Ultra;Qidi Generic ASA;Qidi Generic ABS;Qidi Generic PA-CF;Qidi Generic PA;Qidi Generic PC;Qidi Generic PETG-CF;Qidi Generic PETG;Qidi Generic PLA Silk;Qidi Generic PLA;Qidi Generic PLA-CF;Qidi Generic PVA;Qidi Generic TPU 95A"
 }
diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.2 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.2 nozzle.json
index dcb9066dda..c9c34ad1cc 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.2 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.2 nozzle.json	
@@ -11,7 +11,7 @@
     "printer_model": "Qidi X-Max 3",
     "printer_variant": "0.2",
     "default_filament_profile": [
-        "Qidi Generic PLA @Qidi X-Max 3 0.2 nozzle"
+        "Generic PLA @Qidi X-Max 3 0.2 nozzle"
     ],
     "default_print_profile": "0.10mm Standard @Qidi XMax3 0.2 nozzle",
     "max_layer_height": [
diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json
index a03cee6651..2caa4831cc 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.4 nozzle.json	
@@ -39,10 +39,16 @@
 	"deretraction_speed": [
 		"0"
 	],
-	"single_extruder_multi_material": "0",
+	"retract_lift_below": [
+        "314"
+    ],
+	"extruder_clearance_max_radius": "70",
+    "extruder_clearance_height_to_rod": "30",
+    "extruder_clearance_height_to_lid": "118",
+	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M0",
 	"default_filament_profile": [
-		"Qidi Generic PLA"
+		"Generic PLA"
 	]
 }
\ No newline at end of file
diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.6 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.6 nozzle.json
index 5f34cf6528..e17e3adf31 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.6 nozzle.json	
@@ -11,7 +11,7 @@
     "printer_model": "Qidi X-Max 3",
     "printer_variant": "0.6",
     "default_filament_profile": [
-        "Qidi Generic PLA"
+        "Generic PLA"
     ],
     "default_print_profile": "0.30mm Standard @Qidi XMax3 0.6 nozzle",
     "max_layer_height": [
diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.8 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.8 nozzle.json
index 0daffab7fe..eb3ac3802b 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Max 3 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Max 3 0.8 nozzle.json	
@@ -11,7 +11,7 @@
     "printer_model": "Qidi X-Max 3",
     "printer_variant": "0.8",
     "default_filament_profile": [
-        "Qidi Generic PLA"
+        "Generic PLA"
     ],
     "default_print_profile": "0.40mm Standard @Qidi XMax3 0.8 nozzle",
     "max_layer_height": [
diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3.json b/resources/profiles/Qidi/machine/Qidi X-Max 3.json
index c2e6f10b9b..810762b936 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Max 3.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Max 3.json	
@@ -6,7 +6,6 @@
     "machine_tech": "FFF",
     "family": "Qidi",
     "bed_model": "qidi_xmax3_buildplate_model.stl",
-    "bed_texture": "qidi_xmax3_buildplate_texture.png",
     "hotend_model": "qidi_xseries_gen3_hotend.stl",
 	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PET-CF;QIDI PA12-CF;QIDI PAHT-CF;QIDI ABS-GF25;QIDI PA-Ultra;Qidi Generic ASA;Qidi Generic ABS;Qidi Generic PA-CF;Qidi Generic PA;Qidi Generic PC;Qidi Generic PETG-CF;Qidi Generic PETG;Qidi Generic PLA Silk;Qidi Generic PLA;Qidi Generic TPU 95A"
 }
diff --git a/resources/profiles/Qidi/machine/Qidi X-Max.json b/resources/profiles/Qidi/machine/Qidi X-Max.json
index 764fc7d2b1..18ba9744b5 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Max.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Max.json	
@@ -6,7 +6,6 @@
     "machine_tech": "FFF",
     "family": "Qidi",
     "bed_model": "qidi_xmax_buildplate_model.stl",
-    "bed_texture": "qidi_xmax_buildplate_texture.png",
     "hotend_model": "qidi_xseries_gen2_hotend.stl",
 	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PET-CF;QIDI PA12-CF;QIDI PAHT-CF;QIDI ABS-GF25;QIDI PA-Ultra;Qidi Generic ASA;Qidi Generic ABS;Qidi Generic PA-CF;Qidi Generic PA;Qidi Generic PC;Qidi Generic PETG-CF;Qidi Generic PETG;Qidi Generic PLA Silk;Qidi Generic PLA;Qidi Generic PLA-CF;Qidi Generic PVA;Qidi Generic TPU 95A"
 }
diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.2 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.2 nozzle.json
index db6421a6dd..0c2f64b730 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.2 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.2 nozzle.json	
@@ -11,7 +11,7 @@
     "printer_model": "Qidi X-Plus 3",
     "printer_variant": "0.2",
     "default_filament_profile": [
-        "Qidi Generic PLA @Qidi X-Plus 3 0.2 nozzle"
+        "Generic PLA @Qidi X-Plus 3 0.2 nozzle"
     ],
     "default_print_profile": "0.10mm Standard @Qidi XPlus3 0.2 nozzle",
     "max_layer_height": [
diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json
index fdf66e309c..907fb1297e 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.4 nozzle.json	
@@ -38,10 +38,16 @@
 	"deretraction_speed": [
 		"0"
 	],
-	"single_extruder_multi_material": "0",
+	"retract_lift_below": [
+        "269"
+    ],
+	"extruder_clearance_radius": "60",
+    "extruder_clearance_height_to_rod": "38",
+    "extruder_clearance_height_to_lid": "110",
+	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M0",
 	"default_filament_profile": [
-		"Qidi Generic PLA"
+		"Generic PLA"
 	]
 }
\ No newline at end of file
diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.6 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.6 nozzle.json
index 76ea4b35dd..6b6a38c99e 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.6 nozzle.json	
@@ -11,7 +11,7 @@
     "printer_model": "Qidi X-Plus 3",
     "printer_variant": "0.6",
     "default_filament_profile": [
-        "Qidi Generic PLA"
+        "Generic PLA"
     ],
     "default_print_profile": "0.30mm Standard @Qidi XPlus3 0.6 nozzle",
     "max_layer_height": [
diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.8 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.8 nozzle.json
index a603637d43..308f3519c7 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3 0.8 nozzle.json	
@@ -11,7 +11,7 @@
     "printer_model": "Qidi X-Plus 3",
     "printer_variant": "0.8",
     "default_filament_profile": [
-        "Qidi Generic PLA"
+        "Generic PLA"
     ],
     "default_print_profile": "0.40mm Standard @Qidi XPlus3 0.8 nozzle",
     "max_layer_height": [
diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3.json
index a9124522d5..f1a8526e9d 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Plus 3.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3.json	
@@ -6,7 +6,6 @@
     "machine_tech": "FFF",
     "family": "Qidi",
     "bed_model": "qidi_xplus3_buildplate_model.stl",
-    "bed_texture": "qidi_xplus3_buildplate_texture.png",
     "hotend_model": "qidi_xseries_gen3_hotend.stl",
 	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PET-CF;QIDI PA12-CF;QIDI PAHT-CF;QIDI ABS-GF25;QIDI PA-Ultra;Qidi Generic ASA;Qidi Generic ABS;Qidi Generic PA-CF;Qidi Generic PA;Qidi Generic PC;Qidi Generic PETG-CF;Qidi Generic PETG;Qidi Generic PLA Silk;Qidi Generic PLA;Qidi Generic TPU 95A"
 }
diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.2 nozzle.json
new file mode 100644
index 0000000000..94208b7498
--- /dev/null
+++ b/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.2 nozzle.json	
@@ -0,0 +1,26 @@
+{
+    "type": "machine",
+    "setting_id": "GM_Qidi_020",
+    "name": "Qidi X-Plus 4 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Qidi X-Plus 4 0.4 nozzle",
+    "nozzle_diameter": [
+        "0.2"
+    ],
+    "printer_model": "Qidi X-Plus 4",
+    "printer_variant": "0.2",
+    "default_filament_profile": [
+        "Generic PLA @Qidi X-Plus 4 0.2 nozzle"
+    ],
+    "default_print_profile": "0.10mm Standard @Qidi XPlus4 0.2 nozzle",
+    "max_layer_height": [
+        "0.14"
+    ],
+    "min_layer_height": [
+        "0.04"
+    ],
+    "retraction_length": [
+        "0.4"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.4 nozzle.json
new file mode 100644
index 0000000000..b435a50925
--- /dev/null
+++ b/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.4 nozzle.json	
@@ -0,0 +1,87 @@
+{
+	"type": "machine",
+	"setting_id": "GM_Qidi_021",
+	"name": "Qidi X-Plus 4 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_qidi_x3_common",
+	"printer_model": "Qidi X-Plus 4",
+	"gcode_flavor": "klipper",
+	"default_print_profile": "0.20mm Standard @Qidi XPlus4",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"printable_area": [
+		"0x0",
+		"305x0",
+		"305x305",
+		"0x305"
+	],
+    "bed_exclude_area": [
+        "0x0"
+    ],
+	"printable_height": "280",
+	"nozzle_type": "hardened_steel",
+	"max_layer_height": [
+		"0.28"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"printer_settings_id": "Qidi",
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_length": [
+		"0.8"
+	],
+	"retract_length_toolchange": [
+		"2"
+	],
+	"deretraction_speed": [
+		"0"
+	],
+	"retract_before_wipe": [
+        "0%"
+    ],
+    "wipe_distance": [
+        "2"],
+	"single_extruder_multi_material": "1",
+	"change_filament_gcode": "",
+	"machine_pause_gcode": "M0",
+    "thumbnails": [
+        "272x272",
+        "96x96"
+    ],
+	"machine_max_jerk_e": [
+        "4"
+    ],
+    "machine_max_jerk_x": [
+        "9"
+    ],
+    "machine_max_jerk_y": [
+        "9"
+    ],
+    "machine_max_jerk_z": [
+        "4"
+    ],
+	"machine_max_acceleration_retracting": [
+        "20000"
+    ],
+	"machine_max_speed_z": [
+        "20"
+    ],
+	"retract_lift_below": [
+        "279"
+    ],
+	"extruder_clearance_max_radius": "72",
+    "extruder_clearance_height_to_rod": "32",
+    "extruder_clearance_height_to_lid": "135",
+	"layer_change_gcode": "G92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
+	"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{min(max_print_height, max_layer_z + 3)} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
+    "machine_start_gcode": "PRINT_START BED=[hot_plate_temp_initial_layer] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperatures]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[hot_plate_temp_initial_layer]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nG0 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0] - 12, first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\nSET_PRINT_STATS_INFO CURRENT_LAYER=1\n",
+    "thumbnails_format": "PNG",
+	"default_filament_profile": [
+		"Generic PLA @Qidi X-Plus 4 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.6 nozzle.json
new file mode 100644
index 0000000000..ae18547ec1
--- /dev/null
+++ b/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.6 nozzle.json	
@@ -0,0 +1,29 @@
+{
+    "type": "machine",
+    "setting_id": "GM_Qidi_022",
+    "name": "Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Qidi X-Plus 4 0.4 nozzle",
+    "nozzle_diameter": [
+        "0.6"
+    ],
+    "printer_model": "Qidi X-Plus 4",
+    "printer_variant": "0.6",
+    "default_filament_profile": [
+        "Generic PLA @Qidi X-Plus 4 0.6 nozzle"
+    ],
+    "default_print_profile": "0.30mm Standard @Qidi XPlus4 0.6 nozzle",
+    "max_layer_height": [
+        "0.42"
+    ],
+    "min_layer_height": [
+        "0.12"
+    ],
+    "retraction_length": [
+        "1.4"
+    ],
+    "retraction_minimum_travel": [
+        "3"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.8 nozzle.json
new file mode 100644
index 0000000000..2d96f4b375
--- /dev/null
+++ b/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.8 nozzle.json	
@@ -0,0 +1,29 @@
+{
+    "type": "machine",
+    "setting_id": "GM_Qidi_023",
+    "name": "Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Qidi X-Plus 4 0.4 nozzle",
+    "nozzle_diameter": [
+        "0.8"
+    ],
+    "printer_model": "Qidi X-Plus 4",
+    "printer_variant": "0.8",
+    "default_filament_profile": [
+        "Generic PLA @Qidi X-Plus 4 0.8 nozzle"
+    ],
+    "default_print_profile": "0.40mm Standard @Qidi XPlus4 0.8 nozzle",
+    "max_layer_height": [
+        "0.56"
+    ],
+    "min_layer_height": [
+        "0.16"
+    ],
+    "retract_length_toolchange": [
+        "10"
+    ],
+    "retraction_length": [
+        "3"
+    ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 4.json b/resources/profiles/Qidi/machine/Qidi X-Plus 4.json
new file mode 100644
index 0000000000..f817b4c95d
--- /dev/null
+++ b/resources/profiles/Qidi/machine/Qidi X-Plus 4.json	
@@ -0,0 +1,11 @@
+{
+    "type": "machine_model",
+    "name": "Qidi X-Plus 4",
+    "model_id": "Qidi-XPlus-4",
+    "nozzle_diameter": "0.4;0.2;0.6;0.8",
+    "machine_tech": "FFF",
+    "family": "Qidi",
+    "bed_model": "qidi_xplus4_buildplate_model.stl",
+    "hotend_model": "qidi_xseries_gen3_hotend.stl",
+	"default_materials": "QIDI PLA Rapido @Qidi X-Plus 4 0.4 nozzle;QIDI PLA Rapido @Qidi X-Plus 4 0.2 nozzle;QIDI PLA Rapido @Qidi X-Plus 4 0.6 nozzle;QIDI PLA Rapido @Qidi X-Plus 4 0.8 nozzle;QIDI ABS Rapido @Qidi X-Plus 4 0.4 nozzle;QIDI ABS Rapido @Qidi X-Plus 4 0.2 nozzle;QIDI ABS Rapido @Qidi X-Plus 4 0.6 nozzle;QIDI ABS Rapido @Qidi X-Plus 4 0.8 nozzle;QIDI PETG Tough @Qidi X-Plus 4 0.4 nozzle;QIDI PETG Tough @Qidi X-Plus 4 0.2 nozzle;QIDI PETG Tough @Qidi X-Plus 4 0.6 nozzle;QIDI PETG Tough @Qidi X-Plus 4 0.8 nozzle;QIDI PLA Rapido Matte @Qidi X-Plus 4 0.4 nozzle;QIDI PLA Rapido Matte @Qidi X-Plus 4 0.2 nozzle;QIDI PLA Rapido Matte @Qidi X-Plus 4 0.6 nozzle;QIDI PLA Rapido Matte @Qidi X-Plus 4 0.8 nozzle;QIDI ASA @Qidi X-Plus 4 0.4 nozzle;QIDI ASA @Qidi X-Plus 4 0.2 nozzle;QIDI ASA @Qidi X-Plus 4 0.6 nozzle;QIDI ASA @Qidi X-Plus 4 0.8 nozzle;Qidi Generic PETG @Qidi X-Plus 4 0.4 nozzle;Qidi Generic PETG @Qidi X-Plus 4 0.2 nozzle;Qidi Generic PETG @Qidi X-Plus 4 0.6 nozzle;Qidi Generic PETG @Qidi X-Plus 4 0.8 nozzle;Qidi Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle;Qidi Generic PLA @Qidi X-Plus 4 0.4 nozzle;Qidi Generic PLA @Qidi X-Plus 4 0.2 nozzle;Qidi Generic PLA @Qidi X-Plus 4 0.6 nozzle;Qidi Generic PLA @Qidi X-Plus 4 0.8 nozzle"
+}
diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus.json b/resources/profiles/Qidi/machine/Qidi X-Plus.json
index d5b10a8495..1b251e2f42 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Plus.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Plus.json	
@@ -6,7 +6,6 @@
     "machine_tech": "FFF",
     "family": "Qidi",
     "bed_model": "qidi_xplus_buildplate_model.stl",
-    "bed_texture": "qidi_xplus_buildplate_texture.png",
     "hotend_model": "qidi_xseries_gen2_hotend.stl",
 	"default_materials": "Qidi Generic ASA;Qidi Generic ABS;Qidi Generic PA-CF;Qidi Generic PA;Qidi Generic PC;Qidi Generic PETG-CF;Qidi Generic PETG;Qidi Generic PLA Silk;Qidi Generic PLA;Qidi Generic PLA-CF;Qidi Generic PVA;Qidi Generic TPU"
 }
diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.2 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.2 nozzle.json
index 30afe5c9b6..7599029ed4 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.2 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.2 nozzle.json	
@@ -11,7 +11,7 @@
     "printer_model": "Qidi X-Smart 3",
     "printer_variant": "0.2",
     "default_filament_profile": [
-        "Qidi Generic PLA @Qidi X-Smart 3 0.2 nozzle"
+        "Generic PLA @Qidi X-Smart 3 0.2 nozzle"
     ],
     "default_print_profile": "0.10mm Standard @Qidi XSmart3 0.2 nozzle",
     "max_layer_height": [
diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json
index d116c5ac55..f8fbf4e170 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.4 nozzle.json	
@@ -39,10 +39,15 @@
 	"deretraction_speed": [
 		"0"
 	],
-	"single_extruder_multi_material": "0",
+	"thumbnails": [
+        "205x205/COLPIC",
+        "140x140/COLPIC",
+	    "110x110/PNG"
+    ],
+	"single_extruder_multi_material": "1",
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M0",
 	"default_filament_profile": [
-		"Qidi Generic PLA"
+		"Generic PLA"
 	]
 }
\ No newline at end of file
diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.6 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.6 nozzle.json
index 72bf848911..a8fed8d1ff 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.6 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.6 nozzle.json	
@@ -11,7 +11,7 @@
     "printer_model": "Qidi X-Smart 3",
     "printer_variant": "0.6",
     "default_filament_profile": [
-        "Qidi Generic PLA"
+        "Generic PLA"
     ],
     "default_print_profile": "0.30mm Standard @Qidi XSmart3 0.6 nozzle",
     "max_layer_height": [
diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.8 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.8 nozzle.json
index 45b77d1788..8616a34daf 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.8 nozzle.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3 0.8 nozzle.json	
@@ -11,7 +11,7 @@
     "printer_model": "Qidi X-Smart 3",
     "printer_variant": "0.8",
     "default_filament_profile": [
-        "Qidi Generic PLA"
+        "Generic PLA"
     ],
     "default_print_profile": "0.40mm Standard @Qidi XSmart3 0.8 nozzle",
     "max_layer_height": [
diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3.json
index ccd255521a..4441d48e3a 100644
--- a/resources/profiles/Qidi/machine/Qidi X-Smart 3.json	
+++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3.json	
@@ -6,7 +6,6 @@
     "machine_tech": "FFF",
     "family": "Qidi",
     "bed_model": "qidi_xsmart3_buildplate_model.stl",
-    "bed_texture": "qidi_xsmart3_buildplate_texture.png",
     "hotend_model": "qidi_xseries_gen3_hotend.stl",
 	"default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PET-CF;QIDI PA12-CF;QIDI PAHT-CF;QIDI ABS-GF25;QIDI PA-Ultra;Qidi Generic ASA;Qidi Generic ABS;Qidi Generic PA-CF;Qidi Generic PA;Qidi Generic PC;Qidi Generic PETG-CF;Qidi Generic PETG;Qidi Generic PLA Silk;Qidi Generic PLA;Qidi Generic PLA-CF;Qidi Generic PVA;Qidi Generic TPU 95A"
 }
diff --git a/resources/profiles/Qidi/machine/fdm_machine_common.json b/resources/profiles/Qidi/machine/fdm_machine_common.json
index bdfb8dd658..71198a0e97 100644
--- a/resources/profiles/Qidi/machine/fdm_machine_common.json
+++ b/resources/profiles/Qidi/machine/fdm_machine_common.json
@@ -110,7 +110,9 @@
     "wipe": [
         "1"
     ],
-    "z_lift_type": "NormalLift",
+    "z_hop_types": [
+        "Auto Lift"
+    ],
     "default_print_profile": "",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "machine_start_gcode": "G28\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29 ; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM83\nG0 Z5 F1200\nG0 X{first_layer_print_min[0]} Y{max(0, first_layer_print_min[1] - 2)} F12000\nG0 Z0.2 F600\nG1 E3 F1800\nG0 Z0.3 F600\nG1 X{min(first_layer_print_min[0] + 30,print_bed_max[0])} E6 F600",
diff --git a/resources/profiles/Qidi/machine/fdm_qidi_common.json b/resources/profiles/Qidi/machine/fdm_qidi_common.json
index 2cf38b4e64..fc9e9e05d9 100644
--- a/resources/profiles/Qidi/machine/fdm_qidi_common.json
+++ b/resources/profiles/Qidi/machine/fdm_qidi_common.json
@@ -136,6 +136,7 @@
   "scan_first_layer": "0",
   "nozzle_type": "undefine",
   "auxiliary_fan": "0",
-  "z_hop_types": "Normal Lift"
-
+  "z_hop_types": [
+        "Auto Lift"
+  ]
 }
diff --git a/resources/profiles/Qidi/machine/fdm_qidi_x3_common.json b/resources/profiles/Qidi/machine/fdm_qidi_x3_common.json
index c6167ef6ac..2d795c42cd 100644
--- a/resources/profiles/Qidi/machine/fdm_qidi_x3_common.json
+++ b/resources/profiles/Qidi/machine/fdm_qidi_x3_common.json
@@ -4,10 +4,10 @@
   "from": "system",
   "instantiation": "false",
   "inherits": "fdm_machine_common",
-	"gcode_flavor": "klipper",
+  "gcode_flavor": "klipper",
   "auxiliary_fan": "1",
   "change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+  "machine_pause_gcode": "M0",
   "support_chamber_temp_control": "1",
   "retraction_length": [
     "1"
@@ -19,10 +19,18 @@
       "0.4"
   ],
   "thumbnails": [
-    "380x380",
-    "210x210"
+    "380x380/COLPIC",
+    "210x210/COLPIC",
+    "110x110/PNG"
   ],
+  "retract_lift_below": [
+        "239"
+  ],
+  "extruder_clearance_radius": "56",
+  "extruder_clearance_height_to_rod": "33",
+  "extruder_clearance_height_to_lid": "110", 
+  "support_air_filtration": "1",
   "machine_start_gcode": "PRINT_START\nG28\nM141 S0\nG0 Z50 F600\nM190 S[hot_plate_temp_initial_layer]\nG28 Z\nG29; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM191 S{overall_chamber_temperature}\nM109 S[nozzle_temperature_initial_layer]\nM106 P3 S255\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 12} E{-10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 E{10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\n",
   "machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{min(max_print_height, max_layer_z + 3)} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
-	"scan_first_layer": "0"
+  "scan_first_layer": "0"
 }
diff --git a/resources/profiles/Qidi/process/0.06mm Standard @Qidi XPlus4 0.2 nozzle.json b/resources/profiles/Qidi/process/0.06mm Standard @Qidi XPlus4 0.2 nozzle.json
new file mode 100644
index 0000000000..b706293749
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.06mm Standard @Qidi XPlus4 0.2 nozzle.json	
@@ -0,0 +1,11 @@
+{
+  "type": "process",
+  "setting_id": "GP_Qidi_109",
+  "name": "0.06mm Standard @Qidi XPlus4 0.2 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_QIDI_0.06_nozzle_0.2",
+  "compatible_printers": [
+    "Qidi X-Plus 4 0.2 nozzle"
+  ]
+}
diff --git a/resources/profiles/Qidi/process/0.08mm Standard @Qidi XPlus4 0.2 nozzle.json b/resources/profiles/Qidi/process/0.08mm Standard @Qidi XPlus4 0.2 nozzle.json
new file mode 100644
index 0000000000..aeff511c1a
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.08mm Standard @Qidi XPlus4 0.2 nozzle.json	
@@ -0,0 +1,11 @@
+{
+  "type": "process",
+  "setting_id": "GP_Qidi_110",
+  "name": "0.08mm Standard @Qidi XPlus4 0.2 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_QIDI_0.08_nozzle_0.2",
+  "compatible_printers": [
+    "Qidi X-Plus 4 0.2 nozzle"
+  ]
+}
diff --git a/resources/profiles/Qidi/process/0.10mm Standard @Qidi XPlus4 0.2 nozzle.json b/resources/profiles/Qidi/process/0.10mm Standard @Qidi XPlus4 0.2 nozzle.json
new file mode 100644
index 0000000000..45c24308d2
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.10mm Standard @Qidi XPlus4 0.2 nozzle.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP_Qidi_111",
+    "name": "0.10mm Standard @Qidi XPlus4 0.2 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_QIDI_0.10_nozzle_0.2",
+    "compatible_printers": [
+      "Qidi X-Plus 4 0.2 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus4.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus4.json
new file mode 100644
index 0000000000..4729f87e2d
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus4.json	
@@ -0,0 +1,11 @@
+{
+	"type": "process",
+	"setting_id": "GP_Qidi_112",
+	"name": "0.12mm Fine @Qidi XPlus4",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "0.12mm Fine @Qidi X3",
+"compatible_printers": [
+	"Qidi X-Plus 4 0.4 nozzle"
+]
+}
diff --git a/resources/profiles/Qidi/process/0.12mm Standard @Qidi XPlus4 0.2 nozzle.json b/resources/profiles/Qidi/process/0.12mm Standard @Qidi XPlus4 0.2 nozzle.json
new file mode 100644
index 0000000000..4111d19fb5
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.12mm Standard @Qidi XPlus4 0.2 nozzle.json	
@@ -0,0 +1,11 @@
+{
+  "type": "process",
+  "setting_id": "GP_Qidi_113",
+  "name": "0.12mm Standard @Qidi XPlus4 0.2 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits":  "fdm_process_QIDI_0.12_nozzle_0.2",
+  "compatible_printers": [
+    "Qidi X-Plus 4 0.2 nozzle"
+  ]
+}
diff --git a/resources/profiles/Qidi/process/0.14mm Standard @Qidi XPlus4 0.2 nozzle.json b/resources/profiles/Qidi/process/0.14mm Standard @Qidi XPlus4 0.2 nozzle.json
new file mode 100644
index 0000000000..822023289a
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.14mm Standard @Qidi XPlus4 0.2 nozzle.json	
@@ -0,0 +1,11 @@
+{
+  "type": "process",
+  "setting_id": "GP_Qidi_114",
+  "name": "0.14mm Standard @Qidi XPlus4 0.2 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits":  "fdm_process_QIDI_0.14_nozzle_0.2",
+  "compatible_printers": [
+    "Qidi X-Plus 4 0.2 nozzle"
+  ]
+}
diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus4.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus4.json
new file mode 100644
index 0000000000..6249945daa
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus4.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP_Qidi_115",
+    "name": "0.16mm Optimal @Qidi XPlus4",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "0.16mm Optimal @Qidi X3",
+    "compatible_printers": [
+	  "Qidi X-Plus 4 0.4 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/process/0.18mm Standard @Qidi XPlus4 0.6 nozzle.json b/resources/profiles/Qidi/process/0.18mm Standard @Qidi XPlus4 0.6 nozzle.json
new file mode 100644
index 0000000000..b8e011e985
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.18mm Standard @Qidi XPlus4 0.6 nozzle.json	
@@ -0,0 +1,11 @@
+{
+  "type": "process",
+  "setting_id": "GP_Qidi_116",
+  "name": "0.18mm Standard @Qidi XPlus4 0.6 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_QIDI_0.18_nozzle_0.6",
+  "compatible_printers": [
+    "Qidi X-Plus 4 0.6 nozzle"
+  ]
+}
diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus4.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus4.json
new file mode 100644
index 0000000000..258a490b45
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus4.json	
@@ -0,0 +1,11 @@
+{
+	"type": "process",
+	"setting_id": "GP_Qidi_117",
+	"name": "0.20mm Standard @Qidi XPlus4",
+	"from": "system",
+	"inherits": "0.20mm Standard @Qidi X3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/process/0.24mm Draft @Qidi XPlus4.json b/resources/profiles/Qidi/process/0.24mm Draft @Qidi XPlus4.json
new file mode 100644
index 0000000000..d3a2735c66
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.24mm Draft @Qidi XPlus4.json	
@@ -0,0 +1,11 @@
+{
+	"type": "process",
+	"setting_id": "GP_Qidi_118",
+	"name": "0.24mm Draft @Qidi XPlus4",
+	"from": "system",
+	"inherits": "0.24mm Draft @Qidi X3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/process/0.24mm Standard @Qidi XPlus4 0.6 nozzle.json b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XPlus4 0.6 nozzle.json
new file mode 100644
index 0000000000..929a7931dd
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XPlus4 0.6 nozzle.json	
@@ -0,0 +1,11 @@
+{
+  "type": "process",
+  "setting_id": "GP_Qidi_119",
+  "name": "0.24mm Standard @Qidi XPlus4 0.6 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_QIDI_0.24_nozzle_0.6",
+  "compatible_printers": [
+    "Qidi X-Plus 4 0.6 nozzle"
+  ]
+}
diff --git a/resources/profiles/Qidi/process/0.24mm Standard @Qidi XPlus4 0.8 nozzle.json b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XPlus4 0.8 nozzle.json
new file mode 100644
index 0000000000..2958e85b09
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.24mm Standard @Qidi XPlus4 0.8 nozzle.json	
@@ -0,0 +1,11 @@
+{
+  "type": "process",
+  "setting_id": "GP_Qidi_120",
+  "name": "0.24mm Standard @Qidi XPlus4 0.8 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_QIDI_0.24_nozzle_0.8",
+  "compatible_printers": [
+    "Qidi X-Plus 4 0.8 nozzle"
+  ]
+}
diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus4.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus4.json
new file mode 100644
index 0000000000..0a7d7ca603
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus4.json	
@@ -0,0 +1,85 @@
+{
+	"type": "process",
+	"setting_id": "GP_Qidi_121",
+	"name": "0.25mm Draft @Qidi XPlus4",
+	"from": "system",
+	"inherits": "fdm_process_qidi_x3_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.25",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.42",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.25",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0.42",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.25",
+	"support_filament": "0",
+	"support_line_width": "0.42",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_threshold_angle": "35",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.45",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi XPlus4.json b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi XPlus4.json
new file mode 100644
index 0000000000..31792b1fce
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi XPlus4.json	
@@ -0,0 +1,11 @@
+{
+	"type": "process",
+	"setting_id": "GP_Qidi_122",
+	"name": "0.28mm Extra Draft @Qidi XPlus4",
+	"from": "system",
+	"inherits": "0.28mm Extra Draft @Qidi X3",
+	"instantiation": "true",
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus4.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus4.json
new file mode 100644
index 0000000000..92ff02472f
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus4.json	
@@ -0,0 +1,85 @@
+{
+	"type": "process",
+	"setting_id": "GP_Qidi_123",
+	"name": "0.30mm Extra Draft @Qidi XPlus4",
+	"from": "system",
+	"inherits": "fdm_process_qidi_x3_common",
+	"instantiation": "true",
+	"adaptive_layer_height": "1",
+	"reduce_crossing_wall": "0",
+	"layer_height": "0.3",
+	"max_travel_detour_distance": "0",
+	"bottom_surface_pattern": "monotonic",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bridge_flow": "1",
+	"brim_width": "0",
+	"brim_object_gap": "0",
+	"compatible_printers_condition": "",
+	"print_sequence": "by layer",
+	"bridge_no_support": "0",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"outer_wall_line_width": "0.4",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"line_width": "0.42",
+	"infill_direction": "45",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "grid",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_print_height": "0.3",
+	"infill_combination": "0",
+	"sparse_infill_line_width": "0.45",
+	"infill_wall_overlap": "15%",
+	"interface_shells": "0",
+	"ironing_flow": "15%",
+	"ironing_spacing": "0.1",
+	"ironing_type": "no ironing",
+	"reduce_infill_retraction": "1",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+	"detect_overhang_wall": "1",
+	"inner_wall_line_width": "0.45",
+	"wall_loops": "2",
+	"print_settings_id": "",
+	"raft_layers": "0",
+	"seam_position": "aligned",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "2",
+	"minimum_sparse_infill_area": "10",
+	"internal_solid_infill_line_width": "0",
+	"spiral_mode": "0",
+	"standby_temperature_delta": "-5",
+	"enable_support": "0",
+	"resolution": "0.012",
+	"support_type": "normal(auto)",
+	"support_style": "grid",
+	"support_on_build_plate_only": "0",
+	"support_top_z_distance": "0.3",
+	"support_filament": "0",
+	"support_line_width": "0.42",
+	"support_interface_loop_pattern": "0",
+	"support_interface_filament": "0",
+	"support_interface_top_layers": "3",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_spacing": "0.5",
+	"support_base_pattern": "rectilinear",
+	"support_base_pattern_spacing": "2.5",
+	"support_threshold_angle": "40",
+	"support_object_xy_distance": "50%",
+	"tree_support_branch_angle": "40",
+	"tree_support_wall_count": "0",
+	"detect_thin_wall": "1",
+	"top_surface_pattern": "monotonic",
+	"top_surface_line_width": "0.45",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "0.8",
+	"enable_prime_tower": "0",
+	"wipe_tower_no_sparse_layers": "0",
+	"prime_tower_width": "60",
+	"xy_hole_compensation": "0",
+	"xy_contour_compensation": "0",
+	"compatible_printers": [
+		"Qidi X-Plus 4 0.4 nozzle"
+	]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/process/0.30mm Standard @Qidi XPlus4 0.6 nozzle.json b/resources/profiles/Qidi/process/0.30mm Standard @Qidi XPlus4 0.6 nozzle.json
new file mode 100644
index 0000000000..6653027b2e
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.30mm Standard @Qidi XPlus4 0.6 nozzle.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP_Qidi_124",
+    "name": "0.30mm Standard @Qidi XPlus4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_QIDI_0.30_nozzle_0.6",
+    "compatible_printers": [
+      "Qidi X-Plus 4 0.6 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/process/0.32mm Standard @Qidi XPlus4 0.8 nozzle.json b/resources/profiles/Qidi/process/0.32mm Standard @Qidi XPlus4 0.8 nozzle.json
new file mode 100644
index 0000000000..3891c87860
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.32mm Standard @Qidi XPlus4 0.8 nozzle.json	
@@ -0,0 +1,11 @@
+{
+  "type": "process",
+  "setting_id": "GP_Qidi_125",
+  "name": "0.32mm Standard @Qidi XPlus4 0.8 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_QIDI_0.32_nozzle_0.8",
+  "compatible_printers": [
+    "Qidi X-Plus 4 0.8 nozzle"
+  ]
+}
diff --git a/resources/profiles/Qidi/process/0.36mm Standard @Qidi XPlus4 0.6 nozzle.json b/resources/profiles/Qidi/process/0.36mm Standard @Qidi XPlus4 0.6 nozzle.json
new file mode 100644
index 0000000000..3f37bcf452
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.36mm Standard @Qidi XPlus4 0.6 nozzle.json	
@@ -0,0 +1,11 @@
+{
+  "type": "process",
+  "setting_id": "GP_Qidi_126",
+  "name": "0.36mm Standard @Qidi XPlus4 0.6 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_QIDI_0.36_nozzle_0.6",
+  "compatible_printers": [
+    "Qidi X-Plus 4 0.6 nozzle"
+  ]
+}
diff --git a/resources/profiles/Qidi/process/0.40mm Standard @Qidi XPlus4 0.8 nozzle.json b/resources/profiles/Qidi/process/0.40mm Standard @Qidi XPlus4 0.8 nozzle.json
new file mode 100644
index 0000000000..d4d844631e
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.40mm Standard @Qidi XPlus4 0.8 nozzle.json	
@@ -0,0 +1,11 @@
+{
+    "type": "process",
+    "setting_id": "GP_Qidi_127",
+    "name": "0.40mm Standard @Qidi XPlus4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_QIDI_0.40_nozzle_0.8",
+    "compatible_printers": [
+      "Qidi X-Plus 4 0.8 nozzle"
+    ]
+}
diff --git a/resources/profiles/Qidi/process/0.42mm Standard @Qidi XPlus4 0.6 nozzle.json b/resources/profiles/Qidi/process/0.42mm Standard @Qidi XPlus4 0.6 nozzle.json
new file mode 100644
index 0000000000..d406d60e02
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.42mm Standard @Qidi XPlus4 0.6 nozzle.json	
@@ -0,0 +1,11 @@
+{
+  "type": "process",
+  "setting_id": "GP_Qidi_128",
+  "name": "0.42mm Standard @Qidi XPlus4 0.6 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_QIDI_0.42_nozzle_0.6",
+  "compatible_printers": [
+    "Qidi X-Plus 4 0.6 nozzle"
+  ]
+}
\ No newline at end of file
diff --git a/resources/profiles/Qidi/process/0.48mm Standard @Qidi XPlus4 0.8 nozzle.json b/resources/profiles/Qidi/process/0.48mm Standard @Qidi XPlus4 0.8 nozzle.json
new file mode 100644
index 0000000000..bb0f4857b2
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.48mm Standard @Qidi XPlus4 0.8 nozzle.json	
@@ -0,0 +1,11 @@
+{
+  "type": "process",
+  "setting_id": "GP_Qidi_129",
+  "name": "0.48mm Standard @Qidi XPlus4 0.8 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_QIDI_0.48_nozzle_0.8",
+  "compatible_printers": [
+    "Qidi X-Plus 4 0.8 nozzle"
+  ]
+}
diff --git a/resources/profiles/Qidi/process/0.56mm Standard @Qidi XPlus4 0.8 nozzle.json b/resources/profiles/Qidi/process/0.56mm Standard @Qidi XPlus4 0.8 nozzle.json
new file mode 100644
index 0000000000..b1bca2ad0c
--- /dev/null
+++ b/resources/profiles/Qidi/process/0.56mm Standard @Qidi XPlus4 0.8 nozzle.json	
@@ -0,0 +1,11 @@
+{
+  "type": "process",
+  "setting_id": "GP_Qidi_130",
+  "name": "0.56mm Standard @Qidi XPlus4 0.8 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_QIDI_0.56_nozzle_0.8",
+  "compatible_printers": [
+    "Qidi X-Plus 4 0.8 nozzle"
+  ]
+}
diff --git a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
index ad8f202caf..9dc934b8a8 100644
--- a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
+++ b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
@@ -18,7 +18,7 @@
     "compatible_printers_condition": "",
     "print_sequence": "by layer",
     "default_acceleration": "10000",
-    "bridge_no_support": "1",
+    "bridge_no_support": "0",
     "draft_shield": "disabled",
     "elefant_foot_compensation": "0.15",
     "enable_arc_fitting": "0",
@@ -104,7 +104,7 @@
     "top_shell_thickness": "0.8",
     "travel_speed": "500",
     "enable_prime_tower": "1",
-    "independent_support_layer_height": "0",
+    "independent_support_layer_height": "1",
     "wipe_tower_no_sparse_layers": "0",
     "prime_tower_width": "35",
     "xy_hole_compensation": "0",
@@ -115,6 +115,8 @@
     "internal_solid_infill_pattern": "monotonic",
     "initial_layer_travel_speed": "50%",
     "filter_out_gap_fill": "2",
+    "smooth_coefficient": "90",
+    "small_perimeter_threshold" :"4",
     "notes": "If you want to use Orca's chamber temperature control feature, check that printer.cfg has added the following M191 macro.\nTo add it: go to Fluidd web interface--configuration, copy the following code to the top of the printer.cfg document, SAVE&RESATART  \n\n[gcode_macro M191]\ngcode:\n    {% set s = params.S|float %}\n    {% if s == 0 %}\n        # If target temperature is 0, do nothing\n        M117 Chamber heating cancelled\n    {% else %}\n        SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s}\n        # Orca: uncomment the following line if you want to use heat bed to assist chamber heating\n        M140 S90\n        TEMPERATURE_WAIT SENSOR=\"heater_generic chamber_heater\" MINIMUM={s-1} MAXIMUM={s+1}\n        M117 Chamber at target temperature\n    {% endif %}",
     "exclude_object": "1"
 }
diff --git a/resources/profiles/Qidi/qidi_xplus4_buildplate_model.stl b/resources/profiles/Qidi/qidi_xplus4_buildplate_model.stl
new file mode 100644
index 0000000000..caf59c8425
Binary files /dev/null and b/resources/profiles/Qidi/qidi_xplus4_buildplate_model.stl differ
diff --git a/resources/profiles/Qidi/qidi_xplus4_buildplate_texture.png b/resources/profiles/Qidi/qidi_xplus4_buildplate_texture.png
new file mode 100644
index 0000000000..900c09310d
Binary files /dev/null and b/resources/profiles/Qidi/qidi_xplus4_buildplate_texture.png differ
diff --git a/src/libslic3r/Support/SupportParameters.hpp b/src/libslic3r/Support/SupportParameters.hpp
index 1fb461a589..6042049a67 100644
--- a/src/libslic3r/Support/SupportParameters.hpp
+++ b/src/libslic3r/Support/SupportParameters.hpp
@@ -1,4 +1,5 @@
 #pragma once
+#include <boost/log/trivial.hpp>
 #include "../libslic3r.h"
 #include "../Flow.hpp"
 #include "../PrintConfig.hpp"