printer.cfg

[include startup.cfg]
[include hardware/**/*.cfg]
[include macros/**/*.cfg]
[include features/**/*.cfg]

[printer]
kinematics: corexy
max_velocity: 1000  
max_accel: 25000             #Max 6900
max_z_velocity: 50          #Max 15 for 12V TMC Drivers, can increase for 24V
max_z_accel: 350
square_corner_velocity: 5.0

#--------------------------------------------------------------------

#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [heater_bed]
#*# control = pid
#*# pid_kp = 44.431
#*# pid_ki = 1.712
#*# pid_kd = 288.247
#*#
#*# [extruder]
#*# control = pid
#*# pid_kp = 29.037
#*# pid_ki = 4.208
#*# pid_kd = 50.088
#*#
#*# [input_shaper]
#*# shaper_type_x = mzv
#*# shaper_freq_x = 48.4
#*# shaper_type_y = mzv
#*# shaper_freq_y = 35.2
#*#
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# 	  0.031250, 0.033750, 0.031250
#*# 	  -0.007500, 0.023750, 0.027500
#*# 	  -0.028750, -0.005000, 0.022500
#*# tension = 0.2
#*# min_x = 111.40699999999998
#*# algo = lagrange
#*# y_count = 3
#*# mesh_y_pps = 2
#*# min_y = 111.407
#*# x_count = 3
#*# max_y = 238.58700000000002
#*# mesh_x_pps = 2
#*# max_x = 238.587
#*#
#*# [skew_correction my_skew_profile]
#*# xy_skew = 0.0034296718183946864
#*# xz_skew = 0.0
#*# yz_skew = 0.0
#*#
#*# [probe]
#*# z_offset = -0.950