Revert "Allow rewinding of commands sent via UART buffer"

FluidNC/src/Flowcontrol.cpp

@@ -233,10 +233,8 @@ Error flowcontrol(uint32_t o_label, char* line, size_t& pos, bool& skip) {
         case Op_Repeat:
             if (Job::active()) {
                 if (!skipping && (status = expression(line, pos, value)) == Error::Ok) {
-                    // TODO - return an error if value < 0
-                    // For now, just guard against negative values
-                    stack_push(o_label, operation, !(value > 0.0));
-                    if (value > 0.0) {
+                    stack_push(o_label, operation, !value);
+                    if (value) {
                         context.top().file     = Job::source();
                         context.top().file_pos = context.top().file->position();
                         context.top().repeats  = (uint32_t)value;
@@ -251,7 +249,7 @@ Error flowcontrol(uint32_t o_label, char* line, size_t& pos, bool& skip) {
             if (Job::active()) {
                 if (last_op == Op_Repeat) {
                     if (o_label == context.top().o_label) {
-                        if (context.top().repeats && --context.top().repeats > 0.0) {
+                        if (context.top().repeats && --context.top().repeats) {
                             context.top().file->set_position(context.top().file_pos);
                         } else {
                             stack_pull();

FluidNC/src/Job.cpp

@@ -4,29 +4,17 @@
 #include "Job.h"
 #include <map>
 #include <stack>
-#include "Protocol.h"
 
 std::stack<JobSource*> job;
 
 Channel* Job::leader = nullptr;
 
 bool Job::active() {
-    return !job.empty() || activeChannel;
+    return !job.empty();
 }
 
-JobSource activeChannelJobSource(nullptr);
-
 JobSource* Job::source() {
-    if (job.empty()) {
-        if (activeChannel) {
-            activeChannelJobSource.set_channel(activeChannel);
-            return &activeChannelJobSource;
-        } else {
-            return nullptr;
-        }
-    } else {
-        return job.top();
-    }
+    return job.empty() ? nullptr : job.top();
 }
 
 // save() and restore() are use to close/reopen an SD file atop the job stack
@@ -50,11 +38,9 @@ void Job::nest(Channel* in_channel, Channel* out_channel) {
     job.push(source);
 }
 void Job::pop() {
-    if (!job.empty()) {
-        auto source = job.top();
-        job.pop();
-        delete source;
-    }
+    auto source = job.top();
+    job.pop();
+    delete source;
     if (!active()) {
         leader = nullptr;
     }
@@ -74,14 +60,14 @@ void Job::abort() {
 }
 
 bool Job::get_param(const std::string& name, float& value) {
-    return source()->get_param(name, value);
+    return job.top()->get_param(name, value);
 }
 bool Job::set_param(const std::string& name, float value) {
-    return source()->set_param(name, value);
+    return job.top()->set_param(name, value);
 }
 bool Job::param_exists(const std::string& name) {
-    return source()->param_exists(name);
+    return job.top()->param_exists(name);
 }
 Channel* Job::channel() {
-    return source()->channel();
+    return job.top()->channel();
 }

FluidNC/src/Job.h

@@ -31,7 +31,6 @@ class JobSource {
     void   set_position(size_t pos) { _channel->set_position(pos); }
 
     Channel* channel() { return _channel; }
-    void     set_channel(Channel* channel) { _channel = channel; }
 
     ~JobSource() { delete _channel; }
 };

FluidNC/src/Protocol.h

@@ -50,8 +50,6 @@ extern volatile bool rtCycleStop;
 
 extern volatile bool runLimitLoop;
 
-extern Channel* activeChannel;
-
 // Alarm codes.
 enum class ExecAlarm : uint8_t {
     None                  = 0,

FluidNC/src/UartChannel.cpp

@@ -6,10 +6,8 @@
 #include "Serial.h"                 // allChannels
 
 UartChannel::UartChannel(int num, bool addCR) : Channel("uart_channel", num, addCR) {
-    _lineedit           = new Lineedit(this, _line, Channel::maxLine - 1);
-    _active             = false;
-    _history_buffer     = FixedCircularBuffer<char>(512);
-    _history_buffer_pos = 0;
+    _lineedit = new Lineedit(this, _line, Channel::maxLine - 1);
+    _active   = false;
 }
 
 void UartChannel::init() {
@@ -65,13 +63,10 @@ size_t UartChannel::write(const uint8_t* buffer, size_t length) {
 }
 
 int UartChannel::available() {
-    return (_history_buffer_pos < _history_buffer.position()) || _uart->available();
+    return _uart->available();
 }
 
 int UartChannel::peek() {
-    if (_history_buffer_pos < _history_buffer.position()) {
-        return _history_buffer.at(_history_buffer_pos).value();
-    }
     return _uart->peek();
 }
 
@@ -95,22 +90,12 @@ bool UartChannel::lineComplete(char* line, char c) {
 }
 
 int UartChannel::read() {
-    if (_history_buffer_pos < _history_buffer.position()) {
-        int c = _history_buffer.at(_history_buffer_pos).value();
-        _history_buffer_pos += 1;
-        return c;
-    }
-
     int c = _uart->read();
     if (c == 0x11) {
         // 0x11 is XON.  If we receive that, it is a request to use software flow control
         _uart->setSwFlowControl(true, -1, -1);
         return -1;
     }
-    if (c != -1) {
-        _history_buffer.push((char)c);
-        _history_buffer_pos += 1;
-    }
     return c;
 }
 

FluidNC/src/UartChannel.h

@@ -6,14 +6,11 @@
 #include "Uart.h"
 #include "Channel.h"
 #include "lineedit.h"
-#include "FixedCircularBuffer.h"
 
 class UartChannel : public Channel, public Configuration::Configurable {
 private:
-    Lineedit*                 _lineedit;
-    Uart*                     _uart;
-    FixedCircularBuffer<char> _history_buffer;
-    std::size_t               _history_buffer_pos;
+    Lineedit* _lineedit;
+    Uart*     _uart;
 
     int _uart_num           = 0;
     int _report_interval_ms = 0;
@@ -52,9 +49,6 @@ class UartChannel : public Channel, public Configuration::Configurable {
         handler.item("uart_num", _uart_num);
         handler.item("message_level", _message_level, messageLevels2);
     }
-
-    size_t position() override { return _history_buffer_pos; }
-    void   set_position(size_t pos) override { _history_buffer_pos = pos; }
 };
 
 extern UartChannel Uart0;

fixture_tests/run_fixture

@@ -28,12 +28,6 @@ else:
 def run_fixture(fixture_path, controller):
     op_entries_parsed = op_entries.parse_file(fixture_path)
 
-    print(
-        colored(f"--- Run fixture ", "blue")
-        + colored(fixture_path, "blue", attrs=["bold"])
-        + colored(" ---", "blue")
-    )
-
     try:
         for op_entry in op_entries_parsed:
             if not op_entry.execute(controller):
@@ -45,8 +39,7 @@ def run_fixture(fixture_path, controller):
                 exit(1)
 
     except KeyboardInterrupt:
-        print("Interrupted by user")
-        exit(1)
+        print("Interrupt")
 
     except TimeoutError as e:
         print("Timeout waiting for response, line: " + e.args[0])