diff --git a/configs/GEPRC_TAKER_H743/config.h b/configs/GEPRC_TAKER_H743/config.h new file mode 100644 index 00000000..bfd57c2b --- /dev/null +++ b/configs/GEPRC_TAKER_H743/config.h @@ -0,0 +1,136 @@ +/* + * This file is part of Betaflight. + * + * Betaflight is free software. You can redistribute this software + * and/or modify this software under the terms of the GNU General + * Public License as published by the Free Software Foundation, + * either version 3 of the License, or (at your option) any later + * version. + * + * Betaflight is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this software. + * + * If not, see . + */ + +#pragma once + +#define FC_TARGET_MCU STM32H743 + +#define BOARD_NAME GEPRC_TAKER_H743 +#define MANUFACTURER_ID GEPR + +#define USE_ACC +#define USE_ACC_SPI_MPU6000 +#define USE_ACC_SPI_ICM42688P +#define USE_GYRO +#define USE_GYRO_SPI_MPU6000 +#define USE_GYRO_SPI_ICM42688P +#define USE_BARO +#define USE_BARO_BMP280 +#define USE_BARO_DPS310 +#define USE_BARO_MS5611 +#define USE_SDCARD +#define USE_MAX7456 + +#define BEEPER_PIN PD2 +#define MOTOR1_PIN PB0 +#define MOTOR2_PIN PB1 +#define MOTOR3_PIN PB5 +#define MOTOR4_PIN PB4 +#define MOTOR5_PIN PD12 +#define MOTOR6_PIN PD13 +#define MOTOR7_PIN PC8 +#define MOTOR8_PIN PC9 +#define LED_STRIP_PIN PA8 +#define UART1_TX_PIN PA9 +#define UART2_TX_PIN PA2 +#define UART3_TX_PIN PB10 +#define UART4_TX_PIN PA0 +#define UART6_TX_PIN PC6 +#define UART7_TX_PIN PE8 +#define UART8_TX_PIN PE1 +#define UART1_RX_PIN PA10 +#define UART2_RX_PIN PA3 +#define UART3_RX_PIN PB11 +#define UART4_RX_PIN PA1 +#define UART6_RX_PIN PC7 +#define UART7_RX_PIN PE7 +#define UART8_RX_PIN PE0 +#define I2C1_SCL_PIN PB8 +#define I2C2_SCL_PIN PB10 +#define I2C1_SDA_PIN PB9 +#define I2C2_SDA_PIN PB11 +#define LED0_PIN PC13 +#define SPI1_SCK_PIN PA5 +#define SPI2_SCK_PIN PB13 +#define SPI3_SCK_PIN PC10 +#define SPI4_SCK_PIN PE2 +#define SPI1_SDI_PIN PA6 +#define SPI2_SDI_PIN PB14 +#define SPI3_SDI_PIN PC11 +#define SPI4_SDI_PIN PE5 +#define SPI1_SDO_PIN PA7 +#define SPI2_SDO_PIN PB15 +#define SPI3_SDO_PIN PC12 +#define SPI4_SDO_PIN PE6 +#define ADC_VBAT_PIN PC3 +#define ADC_RSSI_PIN PC5 +#define ADC_CURR_PIN PC2 +#define ADC_EXTERNAL1_PIN PC1 +#define SDCARD_SPI_CS_PIN PA15 +#define PINIO1_PIN PE13 +#define PINIO2_PIN PC14 +#define MAX7456_SPI_CS_PIN PE4 +#define GYRO_1_EXTI_PIN PD0 +#define GYRO_2_EXTI_PIN PD8 +#define GYRO_1_CS_PIN PA4 +#define GYRO_2_CS_PIN PB12 + +#define TIMER_PIN_MAPPING \ + TIMER_PIN_MAP( 0, LED_STRIP_PIN, 1, 0) \ + TIMER_PIN_MAP( 1, MOTOR1_PIN, 2, 0) \ + TIMER_PIN_MAP( 2, MOTOR2_PIN, 2, 0) \ + TIMER_PIN_MAP( 3, MOTOR3_PIN, 1, 0) \ + TIMER_PIN_MAP( 4, MOTOR4_PIN, 1, 0) \ + TIMER_PIN_MAP( 5, MOTOR5_PIN, 1, 0) \ + TIMER_PIN_MAP( 6, MOTOR6_PIN, 1, 0) \ + TIMER_PIN_MAP( 7, MOTOR7_PIN, 2, 0) \ + TIMER_PIN_MAP( 8, MOTOR8_PIN, 2, 0) + +#define ADC1_DMA_OPT 0 +#define ADC2_DMA_OPT 0 +#define ADC3_DMA_OPT 0 +#define TIMUP1_DMA_OPT 0 +#define TIMUP3_DMA_OPT 0 +#define TIMUP4_DMA_OPT 0 +#define TIMUP5_DMA_OPT 0 +#define TIMUP8_DMA_OPT 0 + +#define MSP_DISPLAYPORT_UART SERIAL_PORT_USART1 +#define SERIALRX_UART SERIAL_PORT_USART2 +#define MSP_UART SERIAL_PORT_USART3 + +#define MAG_I2C_INSTANCE I2CDEV_1 +#define BARO_I2C_INSTANCE I2CDEV_1 + +#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_SDCARD +#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC +#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC +#define DEFAULT_CURRENT_METER_SCALE 100 +#define BEEPER_INVERTED +#define USE_SDCARD_SPI +#define SDCARD_SPI_INSTANCE SPI3 +#define PINIO1_CONFIG 129 +#define PINIO1_BOX 0 +#define PINIO2_BOX 40 +#define GYRO_1_SPI_INSTANCE SPI1 +#define GYRO_1_ALIGN CW180_DEG +#define GYRO_2_SPI_INSTANCE SPI2 +#define MAX7456_SPI_INSTANCE SPI4