diff --git a/configs/JHEF411HD/config.h b/configs/JHEF411HD/config.h
new file mode 100644
index 00000000..b8cbb099
--- /dev/null
+++ b/configs/JHEF411HD/config.h
@@ -0,0 +1,99 @@
+/*
+ * This file is part of Betaflight.
+ *
+ * Betaflight is free software. You can redistribute this software
+ * and/or modify this software under the terms of the GNU General
+ * Public License as published by the Free Software Foundation,
+ * either version 3 of the License, or (at your option) any later
+ * version.
+ *
+ * Betaflight is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this software.
+ *
+ * If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define FC_TARGET_MCU     STM32F411
+
+#define BOARD_NAME JHEF411HD
+#define MANUFACTURER_ID JHEF
+
+#define USE_ACC
+#define USE_ACC_SPI_MPU6000
+#define USE_ACC_SPI_ICM42688P
+#define USE_GYRO
+#define USE_GYRO_SPI_MPU6000
+#define USE_GYRO_SPI_ICM42688P
+#define USE_BARO
+#define USE_BARO_BMP280
+#define USE_BARO_DPS310
+#define USE_FLASH
+#define USE_FLASH_W25Q128FV
+#define USE_MAX7456
+
+#define BEEPER_PIN PB2
+#define MOTOR1_PIN PB4
+#define MOTOR2_PIN PB5
+#define MOTOR3_PIN PB6
+#define MOTOR4_PIN PB7
+#define LED_STRIP_PIN PA8
+#define UART1_TX_PIN PA9
+#define UART1_RX_PIN PA10
+#define UART2_TX_PIN PA2
+#define UART2_RX_PIN PA3
+#define UART1_RX_PIN1 PB3
+#define UART1_TX_PIN1 PA15
+#define I2C1_SCL_PIN PB8
+#define I2C1_SDA_PIN PB9
+#define LEPD_PIN PC13
+#define SPI1_SCK_PIN PA5
+#define SPI2_SCK_PIN PB13
+#define SPI1_SDI_PIN PA6
+#define SPI2_SDI_PIN PB14
+#define SPI1_SDO_PIN PA7
+#define SPI2_SDO_PIN PB15
+#define ADC_VBAT_PIN PB0
+#define ADC_CURR_PIN PB1
+#define PINIO1_PIN PB10
+#define PINIO2_PIN PC14
+#define FLASH_CS_PIN PA0
+#define MAX7456_SPI_CS_PIN PB12
+#define GYRO_1_EXTI_PIN PA1
+#define GYRO_1_CS_PIN PA4
+#define USB_DETECT_PIN PC15
+
+#define TIMER_PIN_MAPPING   TIMER_PIN_MAP(  0, PA3,  3, -1 ) \
+                            TIMER_PIN_MAP(  1, PB4,  1,  0 ) \
+                            TIMER_PIN_MAP(  2, PB5,  1,  0 ) \
+                            TIMER_PIN_MAP(  3, PB6,  1,  0 ) \
+                            TIMER_PIN_MAP(  4, PB7,  1,  0 ) \
+                            TIMER_PIN_MAP(  5, PB3,  1,  0 ) \
+                            TIMER_PIN_MAP(  6, PB10, 1,  0 ) \
+                            TIMER_PIN_MAP(  7, PA0,  2,  0 ) \
+                            TIMER_PIN_MAP(  8, PA2,  2,  0 ) \
+                            TIMER_PIN_MAP(  9, PA8,  1,  0 ) \
+                            TIMER_PIN_MAP( 10, PA15, 1,  0 )
+
+#define ADC1_DMA_OPT 0
+#define ADC_INSTANCE ADC1
+
+#define BARO_I2C_INSTANCE (I2CDEV_1)
+#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH
+#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC
+#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC
+#define BEEPER_INVERTED
+#define MAX7456_SPI_INSTANCE SPI2
+#define PINIO1_BOX 40
+#define PINIO2_BOX 41
+#define FLASH_SPI_INSTANCE SPI2
+#define GYRO_1_SPI_INSTANCE SPI1
+#define GYRO_1_ALIGN CW90
+#define SERIALRX_UART SERIAL_PORT_USART2