Module for IP-Symcon version 4.1 or higher. Allows communication with a Denon AV Receiver or Marantz AV Receiver.
Table of Contents
The module can send commands to a Denon Receiver or Marantz Receier and receive the status feedback in IP-Symcon. There are two different modules that can be used. One module uses Port 23 communication via the Denon AVR Control Protocol. The second module uses HTTP for communication. The Denon AVR can only establish a single connection on port 23 at a time. Therefore, if this module is used, no further client can control the Denon AVR in this way via port 23. The advantage, however, is that all documented commands can be sent to the Denon AVR and also receive feedback in IP-Symcon. The second option is to use the Denon HTTP module. Depending on the year of manufacture of the receiver, feedback is not available for all commands. Even with the HTTP module, however, all documented commands can be sent to the receiver. It can also have multiple clients over HTTP Send commands to the Denon receiver and receive feedback.
- All documented commands can be sent to the Denon AVR
- For the module (Telnet Port 23), status feedback is also available for the documented commands. Only one client can be connected to port 23.
- At present, not all the receiver types have all the commands stored, these will be added gradually as needed.
- With the module (HTTP), depending on the receiver type and year of manufacture, a different number of status confirmations are available. Several clients can send Denon over HTTP commands and receive status.
AVR-3310, AVR-3311, AVR-3312, AVR-3313, AVR-3808A, AVR-4310, AVR-4311, AVR-4810, AVR-X1100W, AVR-X1200W, AVR-X1300W, AVR-X1400H, AVR-X1500H, AVR-X1600H, AVR-X2000, AVR-X2100W, AVR-X2200W, AVR-X2300W, AVR-X2400H, AVR-X2500H, AVR-X2600H, AVR-X3000, AVR-X3400H, AVR-X3500H, AVR-X4000, AVR-X4100W, AVR-X4200W, AVR-X4300H, AVR-X4400H, AVR-X4500H, AVR-X5200W, AVR-X6200W, AVR-X6300H, AVR-X6400H, AVR-X6500H, AVR-X7200W, AVR-X7200WA, AVC-X8500H, AVR-S750H, DRA-N5, RCD-N8
Marantz-NR1504, Marantz-NR1506, Marantz-NR1508, Marantz-NR1602, Marantz-NR1603, Marantz-NR1604, Marantz-NR1605, Marantz-NR1606, Marantz-NR1607, Marantz-NR1608, Marantz-SR5006, Marantz-SR5007, Marantz-SR5008, Marantz-SR5009, Marantz-SR5010, Marantz-SR5011, Marantz-SR5012, Marantz-SR6005, Marantz-SR6006, Marantz-SR6007, Marantz-SR6008, Marantz-SR6009, Marantz-SR6010, Marantz-SR6011, Marantz-SR6012, Marantz-SR7005, Marantz-SR7007, Marantz-SR7008, Marantz-SR7009, Marantz-SR7010, Marantz-SR7011, Marantz-SR7012, Marantz-AV7005, Marantz-AV7701, Marantz-AV7702, Marantz-AV7702 mk II, Marantz-AV7703, Marantz-AV7704, Marantz-AV8801, Marantz-AV8802
- IPS 4.1
- Denon AVR or Marantz AVR with network connection. Remote control of the Denon AVR or Marantz AVR must be activated (see AVR manual). IP Symcon must be in the same network as the AVR.
Open the IP Console's web console with http://{IP-Symcon IP}:3777/console/.
Then click on the module store (IP-Symcon > 5.1) icon in the upper right corner.
In the search field type
Denon & Marantz
Then select the module and click Install
Open the object tree.
Open the instance 'Modules' below core instances in the object tree of IP-Symcon (>= Ver 5.x) with a double-click and press the Plus button.
Enter the following URL in the field and confirm with OK:
https://github.com/Wolbolar/IPSymconDenon
and confirm with OK.
Then an entry for the module appears in the list of the instance Modules
By default, the branch master is loaded, which contains current changes and adjustments. Only the master branch is kept current.
If an older version of IP-Symcon smaller than version 5.1 (min 4.3) is used, click on the gear on the right side of the list. It opens another window,
here you can switch to another branch, for older versions smaller than 5.1 (min 4.3) select Old-Version .
In IP-Symcon a separate instance will be created for each zone of the AV receiver we want to use. The Denon IO and Denon Splitter will automatically created. In IP-Symcon add Instance (rightclick -> add object -> instance) under the category under which you want to add the Denon/Marantz AVR instance, and select Denon.
With Denon we find the instance and with Ok the instance is created.
You can choose between the Denon / Marantz AV Receiver HTTP Control and the Denon / Marantz AV Receiver Telnet Control in IP-Symcon. The Denon / Marantz AV Receiver Telnet Control has the much larger functionality and should be used if possible. However, only one device at a time can be connected to the AV receiver in this way. If another device or remote is already using this connection, Denon / Marantz AV Receiver HTTP Control can also be used as an alternative. For the corresponding Denon Splitter, the IP address of the Denon AVR must be entered.
For the Denon / Marantz device, first select the manufacturer and then confirm with Apply Changes.
Then select the AV receiver model and confirm again with Apply Changes.
Now select the zone you want to use and confirm with Apply Changes.
Now, depending on the AV Receiver model and zone, select commands are displayed. The configuration form adapts depending on the selection of the model. The commands to be used in the web front can now be selected or deselected if necessary. The HTTP module updates the status automatically every 10 seconds. When a command is sent via the Denon HTTP module, the status updates immediately after the command has been issued.
With the Telnet module, the status for the corresponding variable is updated whenever a request has been requested or a command has been sent. In order to get a current status after first setting up the Telnet module, a button Status initialize is available in the test environment of the configuration form (at the bottom).
The IP address of the Denon AVR must be entered. The port remains set to 23 for Telnet.
The IP address of the Denon AVR must be entered and a check mark will be placed when opened.
Select AVR Zone and select the commands that should be available. All commands can be individually added or deselected as needed.
Select AVR Zone and select the commands that should be available. All other commands can be individually added or deselected as needed.
| Property | Type | Value | Function |
|---|---|---|---|
| Host | string | IP Adresss from Denon AVR | |
| Port | int | Communication port 23 (do not change) |
| Property | Type | Value | Function |
|---|---|---|---|
| Open | bool | true | Connection to Denon AVR active / inactive |
| Host | string | IP address of the Denon AVR |
| Property | Type | Value | Function |
|---|---|---|---|
| Type | int | Type of Denon AVR | |
| Zone | int | Zone of the Denon AVR | |
| command | bool | activate / deactivate to use the respective command |
| Property | Typ | Standardwert | Funktion |
|---|---|---|---|
| Type | int | Type of Denon AVR | |
| Zone | int | Zone of thenon AVR | |
| command | bool | activate / deactivate to use the respective command |
DAVRH_Power(int $InstanceID, bool $Value)Power on / Power Off Parameter $Value false (Off) / true (On)
DAVRH_MainZonePower(int $InstanceID, bool $Value)Main Zone Power On / Main Zone Power off Parameter $Value false (Off) / true (On)
DAVRH_MainMute(int $InstanceID, bool $Value)MainMute on / off Parameter $Value false (Off) / true (On)
DAVRT_Power(int $InstanceID, bool $Value)Power on / Power Off Parameter $Value false (Off) / true (On)
DAVRT_MainZonePower(int $InstanceID, bool $Value)Main Zone Power On / Main Zone Power off Parameter $Value false (Off) / true (On)
DAVRT_MainzoneAutoStandbySetting(int $InstanceID, int $Value)Mainzone Auto Standby Setting in mMinutes (0 is Off) Parameter $Value 0 (Off) / 15 / 30 / 60 (Minuten)
DAVRT_MainzoneEcoModeSetting(int $InstanceID, string $Value)Mainzone ECO Mode Setting Parameter $Value On / Auto / Off
DAVRT_MasterVolume(int $InstanceID, string $Value)Volume Mainzone up or down Parameter $Value UP / DOWN
DAVRT_MasterVolumeStep(int $InstanceID, string $Value, float $Step)Volume Mainzone up or down with $Step , etc. increase volume 5 Parameter $Value UP / DOWN, $Step Schrittweite der Lautstärke Änderung Minimum 0.5
DAVRT_MasterVolumeFix(int $InstanceID, float $Value)set volume Mainzone Parameter $Value float -80 bis 18 Schrittweite 0.5
DAVRT_MainMute(int $InstanceID, bool $Value)MainMute on / off Parameter $Value false (Off) / true (On)
DAVRT_Input(int $InstanceID, string $Value)select Input Mainzone Parameter $Value PHONO, CD, TUNER, DVD, BD, TV, SAT/CBL, DVR, GAME, AUX, DOCK, IPOD, NET/USB, NAPSTER, LASTFM, FLICKR, FAVORITES, IRADIO, SERVER, USB/IPOD, MPLAY (Mediaplayer), NET (Online Music), BT (Bluetooth), USB (Select INPUT source USB and USB Start Playback), IPD (Select INPUT source USB and iPod DIRECT Start Playback), IRP (Select INPUT source NET/USB and iRadio Recent Play), FVP (Select INPUT source NET/USB and Favorites Play)
DAVRT_NSADisplay(int $InstanceID)Update Display NSA
DAVRT_NSEDisplay(int $InstanceID)Update Display NSE
DAVRT_DynamicVolume(int $InstanceID, string $Value)set Dynamic Volume Parameter $Value Midnight / Evening / Day
DAVRT_DolbyVolume(int $InstanceID, bool $Value)Dolby Volume on /off Parameter $Value false (Off) / true (On)
DAVRT_DolbyVolumeModeler(int $InstanceID, string $Value)Dolby Volume Modeler Parameter $Value Off / Half / Full
DAVRT_DolbyVolumeLeveler(int $InstanceID, string $Value)Dolby Volume Leveler Parameter $Value Low / Middle / High
DAVRT_DynamicCompressor(int $InstanceID, string $Value)Dynamic Compressor Parameter $Value Off / Low / Middle / High
DAVRT_DynamicRangeCompression(int $InstanceID, string $Value)Dynamic Range Compression Parameter $Value Off / Auto / Low / Middle / High
DAVRT_AudysseyDSX(int $InstanceID, string $Value)Dynamic Range Compression Parameter $Value Off / Wide (Audyssey DSX ON(Wide)) / Height (Audyssey DSX ON(Height)) / Height/Wide (Audyssey DSX ON(Height/Wide))
DAVRT_CinemaEQ(int $InstanceID, bool $Value)CinemaEQ on /off Parameter $Value false (Off) / true (On)
DAVRT_Panorama(int $InstanceID, bool $Value)Panorama on / off Parameter $Value false (Off) / true (On)
DAVRT_DynamicEQ(int $InstanceID, bool $Value)Dynamic EQ on / off Parameter $Value false (Off) / true (On)
DAVRT_ChannelVolumeFL(int $InstanceID, float $Value)Channel Volume Front Left Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeFR(int $InstanceID, float $Value)Channel Volume Front Right Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeC(int $InstanceID, float $Value)Channel Volume Center Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeSW(int $InstanceID, float $Value)Channel Volume Subwoofer Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeSW2(int $InstanceID, float $Value)Channel Volume Subwoofer 2 Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeSL(int $InstanceID, float $Value)Channel Volume Surround Left Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeSR(int $InstanceID, float $Value)Channel Volume Surround Right Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeSBL(int $InstanceID, float $Value)Channel Volume Surround Back Left Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeSBR(int $InstanceID, float $Value)Channel Volume Surround Back Right Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeSB(int $InstanceID, float $Value)Channel Volume Surround Back Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeFHL(int $InstanceID, float $Value)Channel Volume Front Height Left Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeFHR(int $InstanceID, float $Value)Channel Volume Front Height Right Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeFWL(int $InstanceID, float $Value)Channel Volume Front Wide Left Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeFWR(int $InstanceID, float $Value)Channel Volume Front Wide Right Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeSHL(int $InstanceID, float $Value)Channel Volume Surround Height Left Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeSHR(int $InstanceID, float $Value)Channel Volume Surround Height Right Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeTS(int $InstanceID, float $Value)Channel Volume Top Surround Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeZRL(int $InstanceID, float $Value)DAVRT_ChannelVolumeTFL(int $InstanceID, float $Value)Channel Volume Top Front Left Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeTFR(int $InstanceID, float $Value)Channel Volume Top Front Right Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeTML(int $InstanceID, float $Value)Channel Volume Top Middle Left Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeTMR(int $InstanceID, float $Value)Channel Volume Top Middle Right Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeTRL(int $InstanceID, float $Value)Channel Volume Top Rear Left Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeTRR(int $InstanceID, float $Value)Channel Volume Top Rear Right Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeRHL(int $InstanceID, float $Value)Channel Volume Rear Height Left Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeRHR(int $InstanceID, float $Value)Channel Volume Rear Height Right Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeFDL(int $InstanceID, float $Value)Channel Volume Front Dolby Left Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeFDR(int $InstanceID, float $Value)Channel Volume Front Dolby Right Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeSDL(int $InstanceID, float $Value)Channel Volume Surround Dolby Left Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeSDR(int $InstanceID, float $Value)Channel Volume Surround Dolby Right Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeBDL(int $InstanceID, float $Value)Channel Volume Back Dolby Left Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_ChannelVolumeBDR(int $InstanceID, float $Value)Channel Volume Back Dolby Right Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_VideoSelect(int $InstanceID, string $Value)Video Select Parameter $Value DVD , BD , TV , SAT/CBL , DVR ,GAME , AUX , DOCK , SOURCE, MPLAY
DAVRT_Subwoofer(int $InstanceID, bool $Value)Subwoofer on / off Parameter $Value false (Off) / true (On)
DAVRT_SubwooferATT(int $InstanceID, bool $Value)SubwooferATT on /off Parameter $Value false (Off) / true (On)
DAVRT_FrontHeight(int $InstanceID, bool $Value)FrontHeight on /off Parameter $Value false (Off) / true (On)
DAVRT_ToneCTRL(int $InstanceID, bool $Value)ToneCTRL on / off Parameter $Value false (Off) / true (On)
DAVRT_AudioDelay(int $InstanceID, int $Value)set Audiodelay Parameter $Value 0 to 300
DAVRT_SpeakerOutputFront(int $InstanceID, string $Value)Speaker Output Front Parameter $Value Off , Wide , Height , Height/Wide
DAVRT_AutoFlagDetectMode(int $InstanceID, bool $Value)Auto Flag Detect Mode on / off Parameter $Value false (Off) / true (On)
DAVRT_ASP(int $InstanceID, string $Value)ASP Parameter $Value Normal / Full
DAVRT_AudioRestorer(int $InstanceID, string $Value)AudioRestorer Parameter $Value Off / 64 / 96 / HQ
DAVRT_CenterImage(int $InstanceID, float $Value)Center Image Parameter $Value 0.0 to 1.0 , Step 0.1
DAVRT_CenterWidth(int $InstanceID, float $Value)Center Width Parameter $Value 0 to 7 , Step 0.5
DAVRT_SelectDecodeMode(int $InstanceID, string $Value)Select Decode Mode Parameter $Value AUTO, HDMI, DIGITAL, ANALOG
DAVRT_DigitalInputMode(int $InstanceID, string $Value)Digital Input Mode Parameter $Value Auto / PCM / DTS
DAVRT_Dimension(int $InstanceID, int $Value)Dimension Parameter $Value 0 to 6
DAVRT_Effect(int $InstanceID, bool $Value)Effect on /off Parameter $Value false (Off) / true (On)
DAVRT_EffectLevel(int $InstanceID, float $Value)Effect Level Parameter $Value 1 to 15 , Step 0.5
DAVRT_HDMIAudioOutput(int $InstanceID, string $Value)HDMI Audio Output Parameter $Value TV / AMP
DAVRT_MultiEQMode(int $InstanceID, string $Value)MultiEQMode Parameter $Value Audyssey / BYP.LR / Flat / Manual / Off
DAVRT_PLIIZHeightGain(int $InstanceID, string $Value)PLIIZHeightGain Parameter $Value Low / Middle / High
DAVRT_RoomSize(int $InstanceID, string $Value)Room Size Parameter $Value Small , Small/Medium , Medium , Medium/Large , Large
DAVRT_StageWidth(int $InstanceID, float $Value)Stage Width Parameter $Value -10 to +10 , Step 0.5
DAVRT_StageHeight(int $InstanceID, float $Value)Stage Height Parameter $Value -10 to +10 , Step 0.5
DAVRT_SurroundBackMode(int $InstanceID, string $Value)Surround Back Mode Parameter $Value Off / On / Matrix / Cinema / Music
DAVRT_SurroundPlayMode(int $InstanceID, string $Value)Surround Play Mode Parameter $Value Music / Cinema / Game / Pro Logic
DAVRT_VerticalStretch(int $InstanceID, bool $Value)Vertical Stretch on /off Parameter $Value false (Off) / true (On)
DAVRT_Contrast(int $InstanceID, float $Value)Contrast Parameter $Value -6 to 6 , Step 0.5
DAVRT_Brightness(int $InstanceID, float $Value)Brightness Parameter $Value 0 to 12 , Step 0.5
DAVRT_ChromaLevel(int $InstanceID, float $Value)ChromaLevel Parameter $Value -6 to 6 , Step 0.5
DAVRT_DigitalNoiseReduction(int $InstanceID, string $Value)Digital Noise Reduction Parameter $Value Off / Low / Middle / High
DAVRT_Enhancer(int $InstanceID, float $Value)Enhancer Parameter $Value 0 to 12 , Step 0.5
DAVRT_HDMIMonitor(int $InstanceID, string $Value)HDMIMonitor Parameter $Value Auto / Monitor 1 / Monitor 2
DAVRT_Hue(int $InstanceID, float $Value)Hue Parameter $Value -6 to 6 , Step 0.5
DAVRT_Resolution(int $InstanceID, string $Value)Resolution Parameter $Value 480p/576p , 1080i , 720p , 1080p , 1080p:24Hz , Auto , 4K , 4K(60/50)
DAVRT_ResolutionHDMI(int $InstanceID, string $Value)Resolution HDMI Parameter $Value 480p/576p , 1080i , 720p , 1080p , 1080p:24Hz , Auto , 4K , 4K(60/50)
DAVRT_VideoProcessingMode(int $InstanceID, string $Value)Video Processing Mode Parameter $Value Auto / Monitor 1 / Monitor 2
DAVRT_GUIMenu(int $InstanceID, bool $Value)GUI Menu on /off Parameter $Value false (disable) / true (show)
DAVRT_GUISourceSelectMenu(int $InstanceID, bool $Value)GUI Source Select Menu on /off Parameter $Value false (disable) / true (show)
DAVRT_CursorUp(int $InstanceID)Cursor Up
DAVRT_CursorDown(int $InstanceID)Cursor Down
DAVRT_CursorLeft(int $InstanceID)Cursor Left
DAVRT_CursorRight(int $InstanceID)Cursor Right
DAVRT_Enter(int $InstanceID)Enter
DAVRT_CursorReturn(int $InstanceID)Cursor Return
DAVRT_BassLevel(int $InstanceID, float $Value)Bass Level Parameter $Value -6 to 6 , Step 0.5
DAVRT_LFELevel(int $InstanceID, float $Value)LFE Level Parameter $Value 0 to -10, Step 0.5
DAVRT_TrebleLevel(int $InstanceID, float $Value)LFE Level Parameter $Value -6 to 6 , Step 0.5
DAVRT_Sleep(int $InstanceID, int $Value)Sleep Parameter $Value 0 ist aus bis 120, Step 10
DAVRT_NACursorUp(int $InstanceID)Network Audio Navigation Cursor Up
DAVRT_NACursorDown(int $InstanceID)Network Audio Navigation Cursor Down
DAVRT_NACursorLeft(int $InstanceID)Network Audio Navigation Cursor Left
DAVRT_NACursorRight(int $InstanceID)Network Audio Navigation Cursor Right
DAVRT_NAEnter(int $InstanceID)Network Audio Navigation Cursor Enter
DAVRT_NAPlay(int $InstanceID)Network Audio Navigation Play
DAVRT_NAPause(int $InstanceID)Network Audio Navigation Pause
DAVRT_NAStop(int $InstanceID)Network Audio Navigation Stop
DAVRT_NASkipPlus(int $InstanceID)Network Audio Navigation Skip +
DAVRT_NASkipMinus(int $InstanceID)Network Audio Navigation Skip -
DAVRT_NARepeatOne(int $InstanceID)Network Audio Navigation Repeat One
DAVRT_NARepeatAll(int $InstanceID)Network Audio Navigation Repeat All
DAVRT_NARepeatOff(int $InstanceID)Network Audio Navigation Repeat Off
DAVRT_NARandomOn(int $InstanceID)Network Audio Navigation Random On
DAVRT_NARandomOff(int $InstanceID)Network Audio Navigation Random Off
DAVRT_NAPageNext(int $InstanceID)Network Audio Navigation Page Next
DAVRT_NAPagePrevious(int $InstanceID)Network Audio Navigation Page Previous
Analog Tuner
DAVRT_SelectTunerPresetAnalog(int $InstanceID, string $Value)Select Tuner Preset Parameter $Value A1 - G8
Zone 2
DAVRT_Z2_Volume(int $InstanceID, string $Value)Zone 2 Volume up / down Parameter $Value UP / DOWN
DAVRT_Z2_VolumeFix(int $InstanceID, float $Value)set Zone 2 Volume to value Parameter $Value float -80 bis 18 Schrittweite 0.5
DAVRT_Zone2Power(int $InstanceID, bool $Value)Zone 2 Power Parameter $Value false (Off) / true (On)
DAVRT_Zone2Mute(int $InstanceID, bool $Value)Zone 2 Mute Parameter $Value false (Off) / true (On)
DAVRT_Zone2InputSource(int $InstanceID, string $Value)selcet Input Zone 2 Parameter $Value PHONO, CD, TUNER, DVD, BD, TV, SAT/CBL, DVR, GAME, AUX, DOCK, IPOD, NET/USB, NAPSTER, LASTFM, FLICKR, FAVORITES, IRADIO, SERVER, USB/IPOD additional parameter with models AVR-X7200W, AVR-X5200W, AVR-X4100W, AVR-X3100W, AVR-X2100W, S900W, AVR-7200WA, AVC-8500H, AVR-6200W, AVR-4200W, AVR-3200W, AVR-2200W, AVR-1200W Parameter $Value MPLAY (Mediaplayer), NET (Online Music), BT (Bluetooth), USB (Select INPUT source USB and USB Start Playback), IPD (Select INPUT source USB and iPod DIRECT Start Playback), IRP (Select INPUT source NET/USB and iRadio Recent Play), FVP (Select INPUT source NET/USB and Favorites Play)
DAVRT_Zone2ChannelVolumeFL(int $InstanceID, float $Value)Channel Volume Zone 2 Front Left Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_Zone2ChannelVolumeFR(int $InstanceID, float $Value)Channel Volume Zone 2 Front Right Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_Zone2ChannelSetting(int $InstanceID, string $Value)Zone2 Channel Setting Parameter $Value Stereo / Mono
Zone 3
DAVRT_Z3_Volume(int $InstanceID, string $Value)Zone 3 Volume up / down Parameter $Value UP / DOWN
DAVRT_Z3_VolumeFix(int $InstanceID, float $Value)set Zone 3 Volume to value Parameter $Value float -80 bis 18 Schrittweite 0.5
DAVRT_Zone3Power(int $InstanceID, bool $Value)Zone 3 Power Parameter $Value false (Off) / true (On)
DAVRT_Zone3Mute(int $InstanceID, bool $Value)Zone 3 Mute Parameter $Value false (Off) / true (On)
DAVRT_Zone3InputSource(int $InstanceID, string $Value)select Input Zone 3 Parameter $Value PHONO, CD, TUNER, DVD, BD, TV, SAT/CBL, DVR, GAME, AUX, DOCK, IPOD, NET/USB, NAPSTER, LASTFM, FLICKR, FAVORITES, IRADIO, SERVER, USB/IPOD additional parameter with models AVR-X7200W, AVR-X5200W, AVR-X4100W, AVR-X3100W, AVR-X2100W, S900W, AVR-7200WA, AVC-8500H, AVR-6200W, AVR-4200W, AVR-3200W, AVR-2200W, AVR-1200W Parameter $Value MPLAY (Mediaplayer), NET (Online Music), BT (Bluetooth), USB (Select INPUT source USB and USB Start Playback), IPD (Select INPUT source USB and iPod DIRECT Start Playback), IRP (Select INPUT source NET/USB and iRadio Recent Play), FVP (Select INPUT source NET/USB and Favorites Play)
DAVRT_Zone3ChannelVolumeFL(int $InstanceID, float $Value)Channel Volume Zone 3 Front Left Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_Zone3ChannelVolumeFR(int $InstanceID, float $Value)Channel Volume Zone 3 Front Right Parameter Range float $Value -12 to 12, Step 0.5
DAVRT_Zone3ChannelSetting(int $InstanceID, string $Value)Zone3 Channel Setting Parameter $Value Stereo / Mono
Generic sending of each command whose command is known
DAVRT_SendCommand(int $InstanceID, string $Value)Parameter $Value corresponds to the complete instruction according to Denon's documentation for the AVR model, e.g. PWON for Power On
GUID: {DC733830-533B-43CD-98F5-23FC2E61287F}
GUID: {5A53A01E-CED5-482F-A28D-331D80874B75}
GUID: {9AE3087F-DC25-4ADB-AB46-AD7455E71032}
GUID: {0C62027E-7CD7-4DF8-890B-B0FEE37857D4}