Umidigi a11 dead

[ouaheb]

Hello, I have an umidigi a11 phone that does not turn on, it stops at a black screen. I tried to flash it with the sp flash tool, it does not accept flashing. And mtkcleint accepts reading and does not accept flashing, can you help, knowing that when executing the command py mtk
.Port - Device detected :)
Preloader - CPU: MT6765(Helio P35/G35)
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11002000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - CQ_DMA addr: 0x10212000
Preloader - Var1: 0x25
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca00
Preloader - SW Ver: 0x0
Preloader - Disabling Watchdog...
Preloader - HW code: 0x766
Preloader - Target config: 0x0
Preloader - SBC enabled: false
Preloader - SLA enabled: False
Preloader - DAA enabled: false
Preloader - SWJTAG enabled: false
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: false
Preloader - Mem write auth: false
Preloader - Cmd 0xC8 blocked: false
Preloader - ME_ID: 2EBC8CE8CCD0C70ED7D69D6E1E05CB9D
Preloader - SOC_ID: B7AE39FE0AE3AEE6675EB137AB1A86B0D5B16133AEEB44D1025271F6EDAFE8E4
PLTools - Loading payload from D:\mtkclient-main\mtkclient\payloads\mt6765_payload.bin, 0x264 bytes
PLTools - Kamakiri / DA Run
Kamakiri - Trying kamakiri2..
Kamakiri - Done sending payload...
PLTools - Successfully sent payload: D:\mtkclient-main\mtkclient\payloads\mt6765_payload.bin

D:\mtkclient-main>