[MT8127] Error on stage 2: USB Overflow

[RayChanNya]

Device: An ZTE TV Box
Log:

[00:55:45]: Device detected :)
[00:55:45]: Device is unprotected.
[00:55:45]: Device is in Preloader-Mode.
[00:55:45]: Uploading legacy da...
[00:55:45]: Uploading legacy stage 1 from MTK_DA_V5.bin
[00:55:45]: Legacy address check not patched.
[00:55:45]: Legacy DA2 CMD F0 not patched.
[00:55:45]: Got loader sync !
[00:55:45]: Reading nand info
[00:55:45]: NAND_INFO: 0xbc4
[00:55:45]: Reading emmc info
[00:55:45]: EMMC_INFO: 0x0
[00:55:45]: ACK: 04028d
[00:55:45]: Setting stage 2 config ...
[00:55:45]: Uploading stage 2...
[00:55:46]: Successfully uploaded stage 2

Terminal:

Preloader - 	CPU:			MT8127/MT3367()
Preloader - 	HW version:		0x0
Preloader - 	WDT:			0x10007000
Preloader - 	Uart:			0x11002000
Preloader - 	Brom payload addr:	0x100a00
Preloader - 	DA payload addr:	0x201000
Preloader - 	Var1:			0xa
Preloader - Disabling Watchdog...
Preloader - HW code:			0x8127
Preloader - Target config:		0x0
Preloader - 	SBC enabled:		False
Preloader - 	SLA enabled:		False
Preloader - 	DAA enabled:		False
Preloader - 	SWJTAG enabled:		False
Preloader - 	EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT:	False
Preloader - 	Root cert required:	False
Preloader - 	Mem read auth:		False
Preloader - 	Mem write auth:		False
Preloader - 	Cmd 0xC8 blocked:	False
Preloader - Get Target info
Preloader - 	HW subcode:		0x8a00
Preloader - 	HW Ver:			0xca04
Preloader - 	SW Ver:			0x0
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DeviceClass
DeviceClass - [LIB]: USB Overflow
Error calling Python override of QThread::run(): None

Using Fedora 41 with proper config