diff --git a/go.mod b/go.mod new file mode 100644 index 0000000..a963364 --- /dev/null +++ b/go.mod @@ -0,0 +1,3 @@ +module github.com/blacknon/go-scplib + +require golang.org/x/crypto v0.0.0-20190701094942-4def268fd1a4 diff --git a/go.sum b/go.sum new file mode 100644 index 0000000..fe5bae6 --- /dev/null +++ b/go.sum @@ -0,0 +1,8 @@ +golang.org/x/crypto v0.0.0-20190308221718-c2843e01d9a2/go.mod h1:djNgcEr1/C05ACkg1iLfiJU5Ep61QUkGW8qpdssI0+w= +golang.org/x/crypto v0.0.0-20190701094942-4def268fd1a4 h1:HuIa8hRrWRSrqYzx1qI49NNxhdi2PrY7gxVSq1JjLDc= +golang.org/x/crypto v0.0.0-20190701094942-4def268fd1a4/go.mod h1:yigFU9vqHzYiE8UmvKecakEJjdnWj3jj499lnFckfCI= +golang.org/x/net v0.0.0-20190404232315-eb5bcb51f2a3/go.mod h1:t9HGtf8HONx5eT2rtn7q6eTqICYqUVnKs3thJo3Qplg= +golang.org/x/sys v0.0.0-20190215142949-d0b11bdaac8a/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY= +golang.org/x/sys v0.0.0-20190412213103-97732733099d h1:+R4KGOnez64A81RvjARKc4UT5/tI9ujCIVX+P5KiHuI= +golang.org/x/sys v0.0.0-20190412213103-97732733099d/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs= +golang.org/x/text v0.3.0/go.mod h1:NqM8EUOU14njkJ3fqMW+pc6Ldnwhi/IjpwHt7yyuwOQ= diff --git a/vendor/golang.org/x/crypto/AUTHORS b/vendor/golang.org/x/crypto/AUTHORS new file mode 100644 index 0000000..2b00ddb --- /dev/null +++ b/vendor/golang.org/x/crypto/AUTHORS @@ -0,0 +1,3 @@ +# This source code refers to The Go Authors for copyright purposes. +# The master list of authors is in the main Go distribution, +# visible at https://tip.golang.org/AUTHORS. diff --git a/vendor/golang.org/x/crypto/CONTRIBUTORS b/vendor/golang.org/x/crypto/CONTRIBUTORS new file mode 100644 index 0000000..1fbd3e9 --- /dev/null +++ b/vendor/golang.org/x/crypto/CONTRIBUTORS @@ -0,0 +1,3 @@ +# This source code was written by the Go contributors. +# The master list of contributors is in the main Go distribution, +# visible at https://tip.golang.org/CONTRIBUTORS. diff --git a/vendor/golang.org/x/crypto/LICENSE b/vendor/golang.org/x/crypto/LICENSE new file mode 100644 index 0000000..6a66aea --- /dev/null +++ b/vendor/golang.org/x/crypto/LICENSE @@ -0,0 +1,27 @@ +Copyright (c) 2009 The Go Authors. All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are +met: + + * Redistributions of source code must retain the above copyright +notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above +copyright notice, this list of conditions and the following disclaimer +in the documentation and/or other materials provided with the +distribution. + * Neither the name of Google Inc. nor the names of its +contributors may be used to endorse or promote products derived from +this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/vendor/golang.org/x/crypto/PATENTS b/vendor/golang.org/x/crypto/PATENTS new file mode 100644 index 0000000..7330990 --- /dev/null +++ b/vendor/golang.org/x/crypto/PATENTS @@ -0,0 +1,22 @@ +Additional IP Rights Grant (Patents) + +"This implementation" means the copyrightable works distributed by +Google as part of the Go project. + +Google hereby grants to You a perpetual, worldwide, non-exclusive, +no-charge, royalty-free, irrevocable (except as stated in this section) +patent license to make, have made, use, offer to sell, sell, import, +transfer and otherwise run, modify and propagate the contents of this +implementation of Go, where such license applies only to those patent +claims, both currently owned or controlled by Google and acquired in +the future, licensable by Google that are necessarily infringed by this +implementation of Go. This grant does not include claims that would be +infringed only as a consequence of further modification of this +implementation. If you or your agent or exclusive licensee institute or +order or agree to the institution of patent litigation against any +entity (including a cross-claim or counterclaim in a lawsuit) alleging +that this implementation of Go or any code incorporated within this +implementation of Go constitutes direct or contributory patent +infringement, or inducement of patent infringement, then any patent +rights granted to you under this License for this implementation of Go +shall terminate as of the date such litigation is filed. diff --git a/vendor/golang.org/x/crypto/curve25519/const_amd64.h b/vendor/golang.org/x/crypto/curve25519/const_amd64.h new file mode 100644 index 0000000..b3f7416 --- /dev/null +++ b/vendor/golang.org/x/crypto/curve25519/const_amd64.h @@ -0,0 +1,8 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// This code was translated into a form compatible with 6a from the public +// domain sources in SUPERCOP: https://bench.cr.yp.to/supercop.html + +#define REDMASK51 0x0007FFFFFFFFFFFF diff --git a/vendor/golang.org/x/crypto/curve25519/const_amd64.s b/vendor/golang.org/x/crypto/curve25519/const_amd64.s new file mode 100644 index 0000000..ee7b4bd --- /dev/null +++ b/vendor/golang.org/x/crypto/curve25519/const_amd64.s @@ -0,0 +1,20 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// This code was translated into a form compatible with 6a from the public +// domain sources in SUPERCOP: https://bench.cr.yp.to/supercop.html + +// +build amd64,!gccgo,!appengine + +// These constants cannot be encoded in non-MOVQ immediates. +// We access them directly from memory instead. + +DATA ·_121666_213(SB)/8, $996687872 +GLOBL ·_121666_213(SB), 8, $8 + +DATA ·_2P0(SB)/8, $0xFFFFFFFFFFFDA +GLOBL ·_2P0(SB), 8, $8 + +DATA ·_2P1234(SB)/8, $0xFFFFFFFFFFFFE +GLOBL ·_2P1234(SB), 8, $8 diff --git a/vendor/golang.org/x/crypto/curve25519/cswap_amd64.s b/vendor/golang.org/x/crypto/curve25519/cswap_amd64.s new file mode 100644 index 0000000..cd793a5 --- /dev/null +++ b/vendor/golang.org/x/crypto/curve25519/cswap_amd64.s @@ -0,0 +1,65 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build amd64,!gccgo,!appengine + +// func cswap(inout *[4][5]uint64, v uint64) +TEXT ·cswap(SB),7,$0 + MOVQ inout+0(FP),DI + MOVQ v+8(FP),SI + + SUBQ $1, SI + NOTQ SI + MOVQ SI, X15 + PSHUFD $0x44, X15, X15 + + MOVOU 0(DI), X0 + MOVOU 16(DI), X2 + MOVOU 32(DI), X4 + MOVOU 48(DI), X6 + MOVOU 64(DI), X8 + MOVOU 80(DI), X1 + MOVOU 96(DI), X3 + MOVOU 112(DI), X5 + MOVOU 128(DI), X7 + MOVOU 144(DI), X9 + + MOVO X1, X10 + MOVO X3, X11 + MOVO X5, X12 + MOVO X7, X13 + MOVO X9, X14 + + PXOR X0, X10 + PXOR X2, X11 + PXOR X4, X12 + PXOR X6, X13 + PXOR X8, X14 + PAND X15, X10 + PAND X15, X11 + PAND X15, X12 + PAND X15, X13 + PAND X15, X14 + PXOR X10, X0 + PXOR X10, X1 + PXOR X11, X2 + PXOR X11, X3 + PXOR X12, X4 + PXOR X12, X5 + PXOR X13, X6 + PXOR X13, X7 + PXOR X14, X8 + PXOR X14, X9 + + MOVOU X0, 0(DI) + MOVOU X2, 16(DI) + MOVOU X4, 32(DI) + MOVOU X6, 48(DI) + MOVOU X8, 64(DI) + MOVOU X1, 80(DI) + MOVOU X3, 96(DI) + MOVOU X5, 112(DI) + MOVOU X7, 128(DI) + MOVOU X9, 144(DI) + RET diff --git a/vendor/golang.org/x/crypto/curve25519/curve25519.go b/vendor/golang.org/x/crypto/curve25519/curve25519.go new file mode 100644 index 0000000..75f24ba --- /dev/null +++ b/vendor/golang.org/x/crypto/curve25519/curve25519.go @@ -0,0 +1,834 @@ +// Copyright 2013 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// We have an implementation in amd64 assembly so this code is only run on +// non-amd64 platforms. The amd64 assembly does not support gccgo. +// +build !amd64 gccgo appengine + +package curve25519 + +import ( + "encoding/binary" +) + +// This code is a port of the public domain, "ref10" implementation of +// curve25519 from SUPERCOP 20130419 by D. J. Bernstein. + +// fieldElement represents an element of the field GF(2^255 - 19). An element +// t, entries t[0]...t[9], represents the integer t[0]+2^26 t[1]+2^51 t[2]+2^77 +// t[3]+2^102 t[4]+...+2^230 t[9]. Bounds on each t[i] vary depending on +// context. +type fieldElement [10]int32 + +func feZero(fe *fieldElement) { + for i := range fe { + fe[i] = 0 + } +} + +func feOne(fe *fieldElement) { + feZero(fe) + fe[0] = 1 +} + +func feAdd(dst, a, b *fieldElement) { + for i := range dst { + dst[i] = a[i] + b[i] + } +} + +func feSub(dst, a, b *fieldElement) { + for i := range dst { + dst[i] = a[i] - b[i] + } +} + +func feCopy(dst, src *fieldElement) { + for i := range dst { + dst[i] = src[i] + } +} + +// feCSwap replaces (f,g) with (g,f) if b == 1; replaces (f,g) with (f,g) if b == 0. +// +// Preconditions: b in {0,1}. +func feCSwap(f, g *fieldElement, b int32) { + b = -b + for i := range f { + t := b & (f[i] ^ g[i]) + f[i] ^= t + g[i] ^= t + } +} + +// load3 reads a 24-bit, little-endian value from in. +func load3(in []byte) int64 { + var r int64 + r = int64(in[0]) + r |= int64(in[1]) << 8 + r |= int64(in[2]) << 16 + return r +} + +// load4 reads a 32-bit, little-endian value from in. +func load4(in []byte) int64 { + return int64(binary.LittleEndian.Uint32(in)) +} + +func feFromBytes(dst *fieldElement, src *[32]byte) { + h0 := load4(src[:]) + h1 := load3(src[4:]) << 6 + h2 := load3(src[7:]) << 5 + h3 := load3(src[10:]) << 3 + h4 := load3(src[13:]) << 2 + h5 := load4(src[16:]) + h6 := load3(src[20:]) << 7 + h7 := load3(src[23:]) << 5 + h8 := load3(src[26:]) << 4 + h9 := (load3(src[29:]) & 0x7fffff) << 2 + + var carry [10]int64 + carry[9] = (h9 + 1<<24) >> 25 + h0 += carry[9] * 19 + h9 -= carry[9] << 25 + carry[1] = (h1 + 1<<24) >> 25 + h2 += carry[1] + h1 -= carry[1] << 25 + carry[3] = (h3 + 1<<24) >> 25 + h4 += carry[3] + h3 -= carry[3] << 25 + carry[5] = (h5 + 1<<24) >> 25 + h6 += carry[5] + h5 -= carry[5] << 25 + carry[7] = (h7 + 1<<24) >> 25 + h8 += carry[7] + h7 -= carry[7] << 25 + + carry[0] = (h0 + 1<<25) >> 26 + h1 += carry[0] + h0 -= carry[0] << 26 + carry[2] = (h2 + 1<<25) >> 26 + h3 += carry[2] + h2 -= carry[2] << 26 + carry[4] = (h4 + 1<<25) >> 26 + h5 += carry[4] + h4 -= carry[4] << 26 + carry[6] = (h6 + 1<<25) >> 26 + h7 += carry[6] + h6 -= carry[6] << 26 + carry[8] = (h8 + 1<<25) >> 26 + h9 += carry[8] + h8 -= carry[8] << 26 + + dst[0] = int32(h0) + dst[1] = int32(h1) + dst[2] = int32(h2) + dst[3] = int32(h3) + dst[4] = int32(h4) + dst[5] = int32(h5) + dst[6] = int32(h6) + dst[7] = int32(h7) + dst[8] = int32(h8) + dst[9] = int32(h9) +} + +// feToBytes marshals h to s. +// Preconditions: +// |h| bounded by 1.1*2^25,1.1*2^24,1.1*2^25,1.1*2^24,etc. +// +// Write p=2^255-19; q=floor(h/p). +// Basic claim: q = floor(2^(-255)(h + 19 2^(-25)h9 + 2^(-1))). +// +// Proof: +// Have |h|<=p so |q|<=1 so |19^2 2^(-255) q|<1/4. +// Also have |h-2^230 h9|<2^230 so |19 2^(-255)(h-2^230 h9)|<1/4. +// +// Write y=2^(-1)-19^2 2^(-255)q-19 2^(-255)(h-2^230 h9). +// Then 0> 25 + q = (h[0] + q) >> 26 + q = (h[1] + q) >> 25 + q = (h[2] + q) >> 26 + q = (h[3] + q) >> 25 + q = (h[4] + q) >> 26 + q = (h[5] + q) >> 25 + q = (h[6] + q) >> 26 + q = (h[7] + q) >> 25 + q = (h[8] + q) >> 26 + q = (h[9] + q) >> 25 + + // Goal: Output h-(2^255-19)q, which is between 0 and 2^255-20. + h[0] += 19 * q + // Goal: Output h-2^255 q, which is between 0 and 2^255-20. + + carry[0] = h[0] >> 26 + h[1] += carry[0] + h[0] -= carry[0] << 26 + carry[1] = h[1] >> 25 + h[2] += carry[1] + h[1] -= carry[1] << 25 + carry[2] = h[2] >> 26 + h[3] += carry[2] + h[2] -= carry[2] << 26 + carry[3] = h[3] >> 25 + h[4] += carry[3] + h[3] -= carry[3] << 25 + carry[4] = h[4] >> 26 + h[5] += carry[4] + h[4] -= carry[4] << 26 + carry[5] = h[5] >> 25 + h[6] += carry[5] + h[5] -= carry[5] << 25 + carry[6] = h[6] >> 26 + h[7] += carry[6] + h[6] -= carry[6] << 26 + carry[7] = h[7] >> 25 + h[8] += carry[7] + h[7] -= carry[7] << 25 + carry[8] = h[8] >> 26 + h[9] += carry[8] + h[8] -= carry[8] << 26 + carry[9] = h[9] >> 25 + h[9] -= carry[9] << 25 + // h10 = carry9 + + // Goal: Output h[0]+...+2^255 h10-2^255 q, which is between 0 and 2^255-20. + // Have h[0]+...+2^230 h[9] between 0 and 2^255-1; + // evidently 2^255 h10-2^255 q = 0. + // Goal: Output h[0]+...+2^230 h[9]. + + s[0] = byte(h[0] >> 0) + s[1] = byte(h[0] >> 8) + s[2] = byte(h[0] >> 16) + s[3] = byte((h[0] >> 24) | (h[1] << 2)) + s[4] = byte(h[1] >> 6) + s[5] = byte(h[1] >> 14) + s[6] = byte((h[1] >> 22) | (h[2] << 3)) + s[7] = byte(h[2] >> 5) + s[8] = byte(h[2] >> 13) + s[9] = byte((h[2] >> 21) | (h[3] << 5)) + s[10] = byte(h[3] >> 3) + s[11] = byte(h[3] >> 11) + s[12] = byte((h[3] >> 19) | (h[4] << 6)) + s[13] = byte(h[4] >> 2) + s[14] = byte(h[4] >> 10) + s[15] = byte(h[4] >> 18) + s[16] = byte(h[5] >> 0) + s[17] = byte(h[5] >> 8) + s[18] = byte(h[5] >> 16) + s[19] = byte((h[5] >> 24) | (h[6] << 1)) + s[20] = byte(h[6] >> 7) + s[21] = byte(h[6] >> 15) + s[22] = byte((h[6] >> 23) | (h[7] << 3)) + s[23] = byte(h[7] >> 5) + s[24] = byte(h[7] >> 13) + s[25] = byte((h[7] >> 21) | (h[8] << 4)) + s[26] = byte(h[8] >> 4) + s[27] = byte(h[8] >> 12) + s[28] = byte((h[8] >> 20) | (h[9] << 6)) + s[29] = byte(h[9] >> 2) + s[30] = byte(h[9] >> 10) + s[31] = byte(h[9] >> 18) +} + +// feMul calculates h = f * g +// Can overlap h with f or g. +// +// Preconditions: +// |f| bounded by 1.1*2^26,1.1*2^25,1.1*2^26,1.1*2^25,etc. +// |g| bounded by 1.1*2^26,1.1*2^25,1.1*2^26,1.1*2^25,etc. +// +// Postconditions: +// |h| bounded by 1.1*2^25,1.1*2^24,1.1*2^25,1.1*2^24,etc. +// +// Notes on implementation strategy: +// +// Using schoolbook multiplication. +// Karatsuba would save a little in some cost models. +// +// Most multiplications by 2 and 19 are 32-bit precomputations; +// cheaper than 64-bit postcomputations. +// +// There is one remaining multiplication by 19 in the carry chain; +// one *19 precomputation can be merged into this, +// but the resulting data flow is considerably less clean. +// +// There are 12 carries below. +// 10 of them are 2-way parallelizable and vectorizable. +// Can get away with 11 carries, but then data flow is much deeper. +// +// With tighter constraints on inputs can squeeze carries into int32. +func feMul(h, f, g *fieldElement) { + f0 := f[0] + f1 := f[1] + f2 := f[2] + f3 := f[3] + f4 := f[4] + f5 := f[5] + f6 := f[6] + f7 := f[7] + f8 := f[8] + f9 := f[9] + g0 := g[0] + g1 := g[1] + g2 := g[2] + g3 := g[3] + g4 := g[4] + g5 := g[5] + g6 := g[6] + g7 := g[7] + g8 := g[8] + g9 := g[9] + g1_19 := 19 * g1 // 1.4*2^29 + g2_19 := 19 * g2 // 1.4*2^30; still ok + g3_19 := 19 * g3 + g4_19 := 19 * g4 + g5_19 := 19 * g5 + g6_19 := 19 * g6 + g7_19 := 19 * g7 + g8_19 := 19 * g8 + g9_19 := 19 * g9 + f1_2 := 2 * f1 + f3_2 := 2 * f3 + f5_2 := 2 * f5 + f7_2 := 2 * f7 + f9_2 := 2 * f9 + f0g0 := int64(f0) * int64(g0) + f0g1 := int64(f0) * int64(g1) + f0g2 := int64(f0) * int64(g2) + f0g3 := int64(f0) * int64(g3) + f0g4 := int64(f0) * int64(g4) + f0g5 := int64(f0) * int64(g5) + f0g6 := int64(f0) * int64(g6) + f0g7 := int64(f0) * int64(g7) + f0g8 := int64(f0) * int64(g8) + f0g9 := int64(f0) * int64(g9) + f1g0 := int64(f1) * int64(g0) + f1g1_2 := int64(f1_2) * int64(g1) + f1g2 := int64(f1) * int64(g2) + f1g3_2 := int64(f1_2) * int64(g3) + f1g4 := int64(f1) * int64(g4) + f1g5_2 := int64(f1_2) * int64(g5) + f1g6 := int64(f1) * int64(g6) + f1g7_2 := int64(f1_2) * int64(g7) + f1g8 := int64(f1) * int64(g8) + f1g9_38 := int64(f1_2) * int64(g9_19) + f2g0 := int64(f2) * int64(g0) + f2g1 := int64(f2) * int64(g1) + f2g2 := int64(f2) * int64(g2) + f2g3 := int64(f2) * int64(g3) + f2g4 := int64(f2) * int64(g4) + f2g5 := int64(f2) * int64(g5) + f2g6 := int64(f2) * int64(g6) + f2g7 := int64(f2) * int64(g7) + f2g8_19 := int64(f2) * int64(g8_19) + f2g9_19 := int64(f2) * int64(g9_19) + f3g0 := int64(f3) * int64(g0) + f3g1_2 := int64(f3_2) * int64(g1) + f3g2 := int64(f3) * int64(g2) + f3g3_2 := int64(f3_2) * int64(g3) + f3g4 := int64(f3) * int64(g4) + f3g5_2 := int64(f3_2) * int64(g5) + f3g6 := int64(f3) * int64(g6) + f3g7_38 := int64(f3_2) * int64(g7_19) + f3g8_19 := int64(f3) * int64(g8_19) + f3g9_38 := int64(f3_2) * int64(g9_19) + f4g0 := int64(f4) * int64(g0) + f4g1 := int64(f4) * int64(g1) + f4g2 := int64(f4) * int64(g2) + f4g3 := int64(f4) * int64(g3) + f4g4 := int64(f4) * int64(g4) + f4g5 := int64(f4) * int64(g5) + f4g6_19 := int64(f4) * int64(g6_19) + f4g7_19 := int64(f4) * int64(g7_19) + f4g8_19 := int64(f4) * int64(g8_19) + f4g9_19 := int64(f4) * int64(g9_19) + f5g0 := int64(f5) * int64(g0) + f5g1_2 := int64(f5_2) * int64(g1) + f5g2 := int64(f5) * int64(g2) + f5g3_2 := int64(f5_2) * int64(g3) + f5g4 := int64(f5) * int64(g4) + f5g5_38 := int64(f5_2) * int64(g5_19) + f5g6_19 := int64(f5) * int64(g6_19) + f5g7_38 := int64(f5_2) * int64(g7_19) + f5g8_19 := int64(f5) * int64(g8_19) + f5g9_38 := int64(f5_2) * int64(g9_19) + f6g0 := int64(f6) * int64(g0) + f6g1 := int64(f6) * int64(g1) + f6g2 := int64(f6) * int64(g2) + f6g3 := int64(f6) * int64(g3) + f6g4_19 := int64(f6) * int64(g4_19) + f6g5_19 := int64(f6) * int64(g5_19) + f6g6_19 := int64(f6) * int64(g6_19) + f6g7_19 := int64(f6) * int64(g7_19) + f6g8_19 := int64(f6) * int64(g8_19) + f6g9_19 := int64(f6) * int64(g9_19) + f7g0 := int64(f7) * int64(g0) + f7g1_2 := int64(f7_2) * int64(g1) + f7g2 := int64(f7) * int64(g2) + f7g3_38 := int64(f7_2) * int64(g3_19) + f7g4_19 := int64(f7) * int64(g4_19) + f7g5_38 := int64(f7_2) * int64(g5_19) + f7g6_19 := int64(f7) * int64(g6_19) + f7g7_38 := int64(f7_2) * int64(g7_19) + f7g8_19 := int64(f7) * int64(g8_19) + f7g9_38 := int64(f7_2) * int64(g9_19) + f8g0 := int64(f8) * int64(g0) + f8g1 := int64(f8) * int64(g1) + f8g2_19 := int64(f8) * int64(g2_19) + f8g3_19 := int64(f8) * int64(g3_19) + f8g4_19 := int64(f8) * int64(g4_19) + f8g5_19 := int64(f8) * int64(g5_19) + f8g6_19 := int64(f8) * int64(g6_19) + f8g7_19 := int64(f8) * int64(g7_19) + f8g8_19 := int64(f8) * int64(g8_19) + f8g9_19 := int64(f8) * int64(g9_19) + f9g0 := int64(f9) * int64(g0) + f9g1_38 := int64(f9_2) * int64(g1_19) + f9g2_19 := int64(f9) * int64(g2_19) + f9g3_38 := int64(f9_2) * int64(g3_19) + f9g4_19 := int64(f9) * int64(g4_19) + f9g5_38 := int64(f9_2) * int64(g5_19) + f9g6_19 := int64(f9) * int64(g6_19) + f9g7_38 := int64(f9_2) * int64(g7_19) + f9g8_19 := int64(f9) * int64(g8_19) + f9g9_38 := int64(f9_2) * int64(g9_19) + h0 := f0g0 + f1g9_38 + f2g8_19 + f3g7_38 + f4g6_19 + f5g5_38 + f6g4_19 + f7g3_38 + f8g2_19 + f9g1_38 + h1 := f0g1 + f1g0 + f2g9_19 + f3g8_19 + f4g7_19 + f5g6_19 + f6g5_19 + f7g4_19 + f8g3_19 + f9g2_19 + h2 := f0g2 + f1g1_2 + f2g0 + f3g9_38 + f4g8_19 + f5g7_38 + f6g6_19 + f7g5_38 + f8g4_19 + f9g3_38 + h3 := f0g3 + f1g2 + f2g1 + f3g0 + f4g9_19 + f5g8_19 + f6g7_19 + f7g6_19 + f8g5_19 + f9g4_19 + h4 := f0g4 + f1g3_2 + f2g2 + f3g1_2 + f4g0 + f5g9_38 + f6g8_19 + f7g7_38 + f8g6_19 + f9g5_38 + h5 := f0g5 + f1g4 + f2g3 + f3g2 + f4g1 + f5g0 + f6g9_19 + f7g8_19 + f8g7_19 + f9g6_19 + h6 := f0g6 + f1g5_2 + f2g4 + f3g3_2 + f4g2 + f5g1_2 + f6g0 + f7g9_38 + f8g8_19 + f9g7_38 + h7 := f0g7 + f1g6 + f2g5 + f3g4 + f4g3 + f5g2 + f6g1 + f7g0 + f8g9_19 + f9g8_19 + h8 := f0g8 + f1g7_2 + f2g6 + f3g5_2 + f4g4 + f5g3_2 + f6g2 + f7g1_2 + f8g0 + f9g9_38 + h9 := f0g9 + f1g8 + f2g7 + f3g6 + f4g5 + f5g4 + f6g3 + f7g2 + f8g1 + f9g0 + var carry [10]int64 + + // |h0| <= (1.1*1.1*2^52*(1+19+19+19+19)+1.1*1.1*2^50*(38+38+38+38+38)) + // i.e. |h0| <= 1.2*2^59; narrower ranges for h2, h4, h6, h8 + // |h1| <= (1.1*1.1*2^51*(1+1+19+19+19+19+19+19+19+19)) + // i.e. |h1| <= 1.5*2^58; narrower ranges for h3, h5, h7, h9 + + carry[0] = (h0 + (1 << 25)) >> 26 + h1 += carry[0] + h0 -= carry[0] << 26 + carry[4] = (h4 + (1 << 25)) >> 26 + h5 += carry[4] + h4 -= carry[4] << 26 + // |h0| <= 2^25 + // |h4| <= 2^25 + // |h1| <= 1.51*2^58 + // |h5| <= 1.51*2^58 + + carry[1] = (h1 + (1 << 24)) >> 25 + h2 += carry[1] + h1 -= carry[1] << 25 + carry[5] = (h5 + (1 << 24)) >> 25 + h6 += carry[5] + h5 -= carry[5] << 25 + // |h1| <= 2^24; from now on fits into int32 + // |h5| <= 2^24; from now on fits into int32 + // |h2| <= 1.21*2^59 + // |h6| <= 1.21*2^59 + + carry[2] = (h2 + (1 << 25)) >> 26 + h3 += carry[2] + h2 -= carry[2] << 26 + carry[6] = (h6 + (1 << 25)) >> 26 + h7 += carry[6] + h6 -= carry[6] << 26 + // |h2| <= 2^25; from now on fits into int32 unchanged + // |h6| <= 2^25; from now on fits into int32 unchanged + // |h3| <= 1.51*2^58 + // |h7| <= 1.51*2^58 + + carry[3] = (h3 + (1 << 24)) >> 25 + h4 += carry[3] + h3 -= carry[3] << 25 + carry[7] = (h7 + (1 << 24)) >> 25 + h8 += carry[7] + h7 -= carry[7] << 25 + // |h3| <= 2^24; from now on fits into int32 unchanged + // |h7| <= 2^24; from now on fits into int32 unchanged + // |h4| <= 1.52*2^33 + // |h8| <= 1.52*2^33 + + carry[4] = (h4 + (1 << 25)) >> 26 + h5 += carry[4] + h4 -= carry[4] << 26 + carry[8] = (h8 + (1 << 25)) >> 26 + h9 += carry[8] + h8 -= carry[8] << 26 + // |h4| <= 2^25; from now on fits into int32 unchanged + // |h8| <= 2^25; from now on fits into int32 unchanged + // |h5| <= 1.01*2^24 + // |h9| <= 1.51*2^58 + + carry[9] = (h9 + (1 << 24)) >> 25 + h0 += carry[9] * 19 + h9 -= carry[9] << 25 + // |h9| <= 2^24; from now on fits into int32 unchanged + // |h0| <= 1.8*2^37 + + carry[0] = (h0 + (1 << 25)) >> 26 + h1 += carry[0] + h0 -= carry[0] << 26 + // |h0| <= 2^25; from now on fits into int32 unchanged + // |h1| <= 1.01*2^24 + + h[0] = int32(h0) + h[1] = int32(h1) + h[2] = int32(h2) + h[3] = int32(h3) + h[4] = int32(h4) + h[5] = int32(h5) + h[6] = int32(h6) + h[7] = int32(h7) + h[8] = int32(h8) + h[9] = int32(h9) +} + +// feSquare calculates h = f*f. Can overlap h with f. +// +// Preconditions: +// |f| bounded by 1.1*2^26,1.1*2^25,1.1*2^26,1.1*2^25,etc. +// +// Postconditions: +// |h| bounded by 1.1*2^25,1.1*2^24,1.1*2^25,1.1*2^24,etc. +func feSquare(h, f *fieldElement) { + f0 := f[0] + f1 := f[1] + f2 := f[2] + f3 := f[3] + f4 := f[4] + f5 := f[5] + f6 := f[6] + f7 := f[7] + f8 := f[8] + f9 := f[9] + f0_2 := 2 * f0 + f1_2 := 2 * f1 + f2_2 := 2 * f2 + f3_2 := 2 * f3 + f4_2 := 2 * f4 + f5_2 := 2 * f5 + f6_2 := 2 * f6 + f7_2 := 2 * f7 + f5_38 := 38 * f5 // 1.31*2^30 + f6_19 := 19 * f6 // 1.31*2^30 + f7_38 := 38 * f7 // 1.31*2^30 + f8_19 := 19 * f8 // 1.31*2^30 + f9_38 := 38 * f9 // 1.31*2^30 + f0f0 := int64(f0) * int64(f0) + f0f1_2 := int64(f0_2) * int64(f1) + f0f2_2 := int64(f0_2) * int64(f2) + f0f3_2 := int64(f0_2) * int64(f3) + f0f4_2 := int64(f0_2) * int64(f4) + f0f5_2 := int64(f0_2) * int64(f5) + f0f6_2 := int64(f0_2) * int64(f6) + f0f7_2 := int64(f0_2) * int64(f7) + f0f8_2 := int64(f0_2) * int64(f8) + f0f9_2 := int64(f0_2) * int64(f9) + f1f1_2 := int64(f1_2) * int64(f1) + f1f2_2 := int64(f1_2) * int64(f2) + f1f3_4 := int64(f1_2) * int64(f3_2) + f1f4_2 := int64(f1_2) * int64(f4) + f1f5_4 := int64(f1_2) * int64(f5_2) + f1f6_2 := int64(f1_2) * int64(f6) + f1f7_4 := int64(f1_2) * int64(f7_2) + f1f8_2 := int64(f1_2) * int64(f8) + f1f9_76 := int64(f1_2) * int64(f9_38) + f2f2 := int64(f2) * int64(f2) + f2f3_2 := int64(f2_2) * int64(f3) + f2f4_2 := int64(f2_2) * int64(f4) + f2f5_2 := int64(f2_2) * int64(f5) + f2f6_2 := int64(f2_2) * int64(f6) + f2f7_2 := int64(f2_2) * int64(f7) + f2f8_38 := int64(f2_2) * int64(f8_19) + f2f9_38 := int64(f2) * int64(f9_38) + f3f3_2 := int64(f3_2) * int64(f3) + f3f4_2 := int64(f3_2) * int64(f4) + f3f5_4 := int64(f3_2) * int64(f5_2) + f3f6_2 := int64(f3_2) * int64(f6) + f3f7_76 := int64(f3_2) * int64(f7_38) + f3f8_38 := int64(f3_2) * int64(f8_19) + f3f9_76 := int64(f3_2) * int64(f9_38) + f4f4 := int64(f4) * int64(f4) + f4f5_2 := int64(f4_2) * int64(f5) + f4f6_38 := int64(f4_2) * int64(f6_19) + f4f7_38 := int64(f4) * int64(f7_38) + f4f8_38 := int64(f4_2) * int64(f8_19) + f4f9_38 := int64(f4) * int64(f9_38) + f5f5_38 := int64(f5) * int64(f5_38) + f5f6_38 := int64(f5_2) * int64(f6_19) + f5f7_76 := int64(f5_2) * int64(f7_38) + f5f8_38 := int64(f5_2) * int64(f8_19) + f5f9_76 := int64(f5_2) * int64(f9_38) + f6f6_19 := int64(f6) * int64(f6_19) + f6f7_38 := int64(f6) * int64(f7_38) + f6f8_38 := int64(f6_2) * int64(f8_19) + f6f9_38 := int64(f6) * int64(f9_38) + f7f7_38 := int64(f7) * int64(f7_38) + f7f8_38 := int64(f7_2) * int64(f8_19) + f7f9_76 := int64(f7_2) * int64(f9_38) + f8f8_19 := int64(f8) * int64(f8_19) + f8f9_38 := int64(f8) * int64(f9_38) + f9f9_38 := int64(f9) * int64(f9_38) + h0 := f0f0 + f1f9_76 + f2f8_38 + f3f7_76 + f4f6_38 + f5f5_38 + h1 := f0f1_2 + f2f9_38 + f3f8_38 + f4f7_38 + f5f6_38 + h2 := f0f2_2 + f1f1_2 + f3f9_76 + f4f8_38 + f5f7_76 + f6f6_19 + h3 := f0f3_2 + f1f2_2 + f4f9_38 + f5f8_38 + f6f7_38 + h4 := f0f4_2 + f1f3_4 + f2f2 + f5f9_76 + f6f8_38 + f7f7_38 + h5 := f0f5_2 + f1f4_2 + f2f3_2 + f6f9_38 + f7f8_38 + h6 := f0f6_2 + f1f5_4 + f2f4_2 + f3f3_2 + f7f9_76 + f8f8_19 + h7 := f0f7_2 + f1f6_2 + f2f5_2 + f3f4_2 + f8f9_38 + h8 := f0f8_2 + f1f7_4 + f2f6_2 + f3f5_4 + f4f4 + f9f9_38 + h9 := f0f9_2 + f1f8_2 + f2f7_2 + f3f6_2 + f4f5_2 + var carry [10]int64 + + carry[0] = (h0 + (1 << 25)) >> 26 + h1 += carry[0] + h0 -= carry[0] << 26 + carry[4] = (h4 + (1 << 25)) >> 26 + h5 += carry[4] + h4 -= carry[4] << 26 + + carry[1] = (h1 + (1 << 24)) >> 25 + h2 += carry[1] + h1 -= carry[1] << 25 + carry[5] = (h5 + (1 << 24)) >> 25 + h6 += carry[5] + h5 -= carry[5] << 25 + + carry[2] = (h2 + (1 << 25)) >> 26 + h3 += carry[2] + h2 -= carry[2] << 26 + carry[6] = (h6 + (1 << 25)) >> 26 + h7 += carry[6] + h6 -= carry[6] << 26 + + carry[3] = (h3 + (1 << 24)) >> 25 + h4 += carry[3] + h3 -= carry[3] << 25 + carry[7] = (h7 + (1 << 24)) >> 25 + h8 += carry[7] + h7 -= carry[7] << 25 + + carry[4] = (h4 + (1 << 25)) >> 26 + h5 += carry[4] + h4 -= carry[4] << 26 + carry[8] = (h8 + (1 << 25)) >> 26 + h9 += carry[8] + h8 -= carry[8] << 26 + + carry[9] = (h9 + (1 << 24)) >> 25 + h0 += carry[9] * 19 + h9 -= carry[9] << 25 + + carry[0] = (h0 + (1 << 25)) >> 26 + h1 += carry[0] + h0 -= carry[0] << 26 + + h[0] = int32(h0) + h[1] = int32(h1) + h[2] = int32(h2) + h[3] = int32(h3) + h[4] = int32(h4) + h[5] = int32(h5) + h[6] = int32(h6) + h[7] = int32(h7) + h[8] = int32(h8) + h[9] = int32(h9) +} + +// feMul121666 calculates h = f * 121666. Can overlap h with f. +// +// Preconditions: +// |f| bounded by 1.1*2^26,1.1*2^25,1.1*2^26,1.1*2^25,etc. +// +// Postconditions: +// |h| bounded by 1.1*2^25,1.1*2^24,1.1*2^25,1.1*2^24,etc. +func feMul121666(h, f *fieldElement) { + h0 := int64(f[0]) * 121666 + h1 := int64(f[1]) * 121666 + h2 := int64(f[2]) * 121666 + h3 := int64(f[3]) * 121666 + h4 := int64(f[4]) * 121666 + h5 := int64(f[5]) * 121666 + h6 := int64(f[6]) * 121666 + h7 := int64(f[7]) * 121666 + h8 := int64(f[8]) * 121666 + h9 := int64(f[9]) * 121666 + var carry [10]int64 + + carry[9] = (h9 + (1 << 24)) >> 25 + h0 += carry[9] * 19 + h9 -= carry[9] << 25 + carry[1] = (h1 + (1 << 24)) >> 25 + h2 += carry[1] + h1 -= carry[1] << 25 + carry[3] = (h3 + (1 << 24)) >> 25 + h4 += carry[3] + h3 -= carry[3] << 25 + carry[5] = (h5 + (1 << 24)) >> 25 + h6 += carry[5] + h5 -= carry[5] << 25 + carry[7] = (h7 + (1 << 24)) >> 25 + h8 += carry[7] + h7 -= carry[7] << 25 + + carry[0] = (h0 + (1 << 25)) >> 26 + h1 += carry[0] + h0 -= carry[0] << 26 + carry[2] = (h2 + (1 << 25)) >> 26 + h3 += carry[2] + h2 -= carry[2] << 26 + carry[4] = (h4 + (1 << 25)) >> 26 + h5 += carry[4] + h4 -= carry[4] << 26 + carry[6] = (h6 + (1 << 25)) >> 26 + h7 += carry[6] + h6 -= carry[6] << 26 + carry[8] = (h8 + (1 << 25)) >> 26 + h9 += carry[8] + h8 -= carry[8] << 26 + + h[0] = int32(h0) + h[1] = int32(h1) + h[2] = int32(h2) + h[3] = int32(h3) + h[4] = int32(h4) + h[5] = int32(h5) + h[6] = int32(h6) + h[7] = int32(h7) + h[8] = int32(h8) + h[9] = int32(h9) +} + +// feInvert sets out = z^-1. +func feInvert(out, z *fieldElement) { + var t0, t1, t2, t3 fieldElement + var i int + + feSquare(&t0, z) + for i = 1; i < 1; i++ { + feSquare(&t0, &t0) + } + feSquare(&t1, &t0) + for i = 1; i < 2; i++ { + feSquare(&t1, &t1) + } + feMul(&t1, z, &t1) + feMul(&t0, &t0, &t1) + feSquare(&t2, &t0) + for i = 1; i < 1; i++ { + feSquare(&t2, &t2) + } + feMul(&t1, &t1, &t2) + feSquare(&t2, &t1) + for i = 1; i < 5; i++ { + feSquare(&t2, &t2) + } + feMul(&t1, &t2, &t1) + feSquare(&t2, &t1) + for i = 1; i < 10; i++ { + feSquare(&t2, &t2) + } + feMul(&t2, &t2, &t1) + feSquare(&t3, &t2) + for i = 1; i < 20; i++ { + feSquare(&t3, &t3) + } + feMul(&t2, &t3, &t2) + feSquare(&t2, &t2) + for i = 1; i < 10; i++ { + feSquare(&t2, &t2) + } + feMul(&t1, &t2, &t1) + feSquare(&t2, &t1) + for i = 1; i < 50; i++ { + feSquare(&t2, &t2) + } + feMul(&t2, &t2, &t1) + feSquare(&t3, &t2) + for i = 1; i < 100; i++ { + feSquare(&t3, &t3) + } + feMul(&t2, &t3, &t2) + feSquare(&t2, &t2) + for i = 1; i < 50; i++ { + feSquare(&t2, &t2) + } + feMul(&t1, &t2, &t1) + feSquare(&t1, &t1) + for i = 1; i < 5; i++ { + feSquare(&t1, &t1) + } + feMul(out, &t1, &t0) +} + +func scalarMult(out, in, base *[32]byte) { + var e [32]byte + + copy(e[:], in[:]) + e[0] &= 248 + e[31] &= 127 + e[31] |= 64 + + var x1, x2, z2, x3, z3, tmp0, tmp1 fieldElement + feFromBytes(&x1, base) + feOne(&x2) + feCopy(&x3, &x1) + feOne(&z3) + + swap := int32(0) + for pos := 254; pos >= 0; pos-- { + b := e[pos/8] >> uint(pos&7) + b &= 1 + swap ^= int32(b) + feCSwap(&x2, &x3, swap) + feCSwap(&z2, &z3, swap) + swap = int32(b) + + feSub(&tmp0, &x3, &z3) + feSub(&tmp1, &x2, &z2) + feAdd(&x2, &x2, &z2) + feAdd(&z2, &x3, &z3) + feMul(&z3, &tmp0, &x2) + feMul(&z2, &z2, &tmp1) + feSquare(&tmp0, &tmp1) + feSquare(&tmp1, &x2) + feAdd(&x3, &z3, &z2) + feSub(&z2, &z3, &z2) + feMul(&x2, &tmp1, &tmp0) + feSub(&tmp1, &tmp1, &tmp0) + feSquare(&z2, &z2) + feMul121666(&z3, &tmp1) + feSquare(&x3, &x3) + feAdd(&tmp0, &tmp0, &z3) + feMul(&z3, &x1, &z2) + feMul(&z2, &tmp1, &tmp0) + } + + feCSwap(&x2, &x3, swap) + feCSwap(&z2, &z3, swap) + + feInvert(&z2, &z2) + feMul(&x2, &x2, &z2) + feToBytes(out, &x2) +} diff --git a/vendor/golang.org/x/crypto/curve25519/doc.go b/vendor/golang.org/x/crypto/curve25519/doc.go new file mode 100644 index 0000000..da9b10d --- /dev/null +++ b/vendor/golang.org/x/crypto/curve25519/doc.go @@ -0,0 +1,23 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// Package curve25519 provides an implementation of scalar multiplication on +// the elliptic curve known as curve25519. See https://cr.yp.to/ecdh.html +package curve25519 // import "golang.org/x/crypto/curve25519" + +// basePoint is the x coordinate of the generator of the curve. +var basePoint = [32]byte{9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} + +// ScalarMult sets dst to the product in*base where dst and base are the x +// coordinates of group points and all values are in little-endian form. +func ScalarMult(dst, in, base *[32]byte) { + scalarMult(dst, in, base) +} + +// ScalarBaseMult sets dst to the product in*base where dst and base are the x +// coordinates of group points, base is the standard generator and all values +// are in little-endian form. +func ScalarBaseMult(dst, in *[32]byte) { + ScalarMult(dst, in, &basePoint) +} diff --git a/vendor/golang.org/x/crypto/curve25519/freeze_amd64.s b/vendor/golang.org/x/crypto/curve25519/freeze_amd64.s new file mode 100644 index 0000000..3908161 --- /dev/null +++ b/vendor/golang.org/x/crypto/curve25519/freeze_amd64.s @@ -0,0 +1,73 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// This code was translated into a form compatible with 6a from the public +// domain sources in SUPERCOP: https://bench.cr.yp.to/supercop.html + +// +build amd64,!gccgo,!appengine + +#include "const_amd64.h" + +// func freeze(inout *[5]uint64) +TEXT ·freeze(SB),7,$0-8 + MOVQ inout+0(FP), DI + + MOVQ 0(DI),SI + MOVQ 8(DI),DX + MOVQ 16(DI),CX + MOVQ 24(DI),R8 + MOVQ 32(DI),R9 + MOVQ $REDMASK51,AX + MOVQ AX,R10 + SUBQ $18,R10 + MOVQ $3,R11 +REDUCELOOP: + MOVQ SI,R12 + SHRQ $51,R12 + ANDQ AX,SI + ADDQ R12,DX + MOVQ DX,R12 + SHRQ $51,R12 + ANDQ AX,DX + ADDQ R12,CX + MOVQ CX,R12 + SHRQ $51,R12 + ANDQ AX,CX + ADDQ R12,R8 + MOVQ R8,R12 + SHRQ $51,R12 + ANDQ AX,R8 + ADDQ R12,R9 + MOVQ R9,R12 + SHRQ $51,R12 + ANDQ AX,R9 + IMUL3Q $19,R12,R12 + ADDQ R12,SI + SUBQ $1,R11 + JA REDUCELOOP + MOVQ $1,R12 + CMPQ R10,SI + CMOVQLT R11,R12 + CMPQ AX,DX + CMOVQNE R11,R12 + CMPQ AX,CX + CMOVQNE R11,R12 + CMPQ AX,R8 + CMOVQNE R11,R12 + CMPQ AX,R9 + CMOVQNE R11,R12 + NEGQ R12 + ANDQ R12,AX + ANDQ R12,R10 + SUBQ R10,SI + SUBQ AX,DX + SUBQ AX,CX + SUBQ AX,R8 + SUBQ AX,R9 + MOVQ SI,0(DI) + MOVQ DX,8(DI) + MOVQ CX,16(DI) + MOVQ R8,24(DI) + MOVQ R9,32(DI) + RET diff --git a/vendor/golang.org/x/crypto/curve25519/ladderstep_amd64.s b/vendor/golang.org/x/crypto/curve25519/ladderstep_amd64.s new file mode 100644 index 0000000..e0ac30c --- /dev/null +++ b/vendor/golang.org/x/crypto/curve25519/ladderstep_amd64.s @@ -0,0 +1,1377 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// This code was translated into a form compatible with 6a from the public +// domain sources in SUPERCOP: https://bench.cr.yp.to/supercop.html + +// +build amd64,!gccgo,!appengine + +#include "const_amd64.h" + +// func ladderstep(inout *[5][5]uint64) +TEXT ·ladderstep(SB),0,$296-8 + MOVQ inout+0(FP),DI + + MOVQ 40(DI),SI + MOVQ 48(DI),DX + MOVQ 56(DI),CX + MOVQ 64(DI),R8 + MOVQ 72(DI),R9 + MOVQ SI,AX + MOVQ DX,R10 + MOVQ CX,R11 + MOVQ R8,R12 + MOVQ R9,R13 + ADDQ ·_2P0(SB),AX + ADDQ ·_2P1234(SB),R10 + ADDQ ·_2P1234(SB),R11 + ADDQ ·_2P1234(SB),R12 + ADDQ ·_2P1234(SB),R13 + ADDQ 80(DI),SI + ADDQ 88(DI),DX + ADDQ 96(DI),CX + ADDQ 104(DI),R8 + ADDQ 112(DI),R9 + SUBQ 80(DI),AX + SUBQ 88(DI),R10 + SUBQ 96(DI),R11 + SUBQ 104(DI),R12 + SUBQ 112(DI),R13 + MOVQ SI,0(SP) + MOVQ DX,8(SP) + MOVQ CX,16(SP) + MOVQ R8,24(SP) + MOVQ R9,32(SP) + MOVQ AX,40(SP) + MOVQ R10,48(SP) + MOVQ R11,56(SP) + MOVQ R12,64(SP) + MOVQ R13,72(SP) + MOVQ 40(SP),AX + MULQ 40(SP) + MOVQ AX,SI + MOVQ DX,CX + MOVQ 40(SP),AX + SHLQ $1,AX + MULQ 48(SP) + MOVQ AX,R8 + MOVQ DX,R9 + MOVQ 40(SP),AX + SHLQ $1,AX + MULQ 56(SP) + MOVQ AX,R10 + MOVQ DX,R11 + MOVQ 40(SP),AX + SHLQ $1,AX + MULQ 64(SP) + MOVQ AX,R12 + MOVQ DX,R13 + MOVQ 40(SP),AX + SHLQ $1,AX + MULQ 72(SP) + MOVQ AX,R14 + MOVQ DX,R15 + MOVQ 48(SP),AX + MULQ 48(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 48(SP),AX + SHLQ $1,AX + MULQ 56(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 48(SP),AX + SHLQ $1,AX + MULQ 64(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 48(SP),DX + IMUL3Q $38,DX,AX + MULQ 72(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 56(SP),AX + MULQ 56(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 56(SP),DX + IMUL3Q $38,DX,AX + MULQ 64(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 56(SP),DX + IMUL3Q $38,DX,AX + MULQ 72(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 64(SP),DX + IMUL3Q $19,DX,AX + MULQ 64(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 64(SP),DX + IMUL3Q $38,DX,AX + MULQ 72(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 72(SP),DX + IMUL3Q $19,DX,AX + MULQ 72(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ $REDMASK51,DX + SHLQ $13,SI,CX + ANDQ DX,SI + SHLQ $13,R8,R9 + ANDQ DX,R8 + ADDQ CX,R8 + SHLQ $13,R10,R11 + ANDQ DX,R10 + ADDQ R9,R10 + SHLQ $13,R12,R13 + ANDQ DX,R12 + ADDQ R11,R12 + SHLQ $13,R14,R15 + ANDQ DX,R14 + ADDQ R13,R14 + IMUL3Q $19,R15,CX + ADDQ CX,SI + MOVQ SI,CX + SHRQ $51,CX + ADDQ R8,CX + ANDQ DX,SI + MOVQ CX,R8 + SHRQ $51,CX + ADDQ R10,CX + ANDQ DX,R8 + MOVQ CX,R9 + SHRQ $51,CX + ADDQ R12,CX + ANDQ DX,R9 + MOVQ CX,AX + SHRQ $51,CX + ADDQ R14,CX + ANDQ DX,AX + MOVQ CX,R10 + SHRQ $51,CX + IMUL3Q $19,CX,CX + ADDQ CX,SI + ANDQ DX,R10 + MOVQ SI,80(SP) + MOVQ R8,88(SP) + MOVQ R9,96(SP) + MOVQ AX,104(SP) + MOVQ R10,112(SP) + MOVQ 0(SP),AX + MULQ 0(SP) + MOVQ AX,SI + MOVQ DX,CX + MOVQ 0(SP),AX + SHLQ $1,AX + MULQ 8(SP) + MOVQ AX,R8 + MOVQ DX,R9 + MOVQ 0(SP),AX + SHLQ $1,AX + MULQ 16(SP) + MOVQ AX,R10 + MOVQ DX,R11 + MOVQ 0(SP),AX + SHLQ $1,AX + MULQ 24(SP) + MOVQ AX,R12 + MOVQ DX,R13 + MOVQ 0(SP),AX + SHLQ $1,AX + MULQ 32(SP) + MOVQ AX,R14 + MOVQ DX,R15 + MOVQ 8(SP),AX + MULQ 8(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 8(SP),AX + SHLQ $1,AX + MULQ 16(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 8(SP),AX + SHLQ $1,AX + MULQ 24(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 8(SP),DX + IMUL3Q $38,DX,AX + MULQ 32(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 16(SP),AX + MULQ 16(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 16(SP),DX + IMUL3Q $38,DX,AX + MULQ 24(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 16(SP),DX + IMUL3Q $38,DX,AX + MULQ 32(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 24(SP),DX + IMUL3Q $19,DX,AX + MULQ 24(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 24(SP),DX + IMUL3Q $38,DX,AX + MULQ 32(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 32(SP),DX + IMUL3Q $19,DX,AX + MULQ 32(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ $REDMASK51,DX + SHLQ $13,SI,CX + ANDQ DX,SI + SHLQ $13,R8,R9 + ANDQ DX,R8 + ADDQ CX,R8 + SHLQ $13,R10,R11 + ANDQ DX,R10 + ADDQ R9,R10 + SHLQ $13,R12,R13 + ANDQ DX,R12 + ADDQ R11,R12 + SHLQ $13,R14,R15 + ANDQ DX,R14 + ADDQ R13,R14 + IMUL3Q $19,R15,CX + ADDQ CX,SI + MOVQ SI,CX + SHRQ $51,CX + ADDQ R8,CX + ANDQ DX,SI + MOVQ CX,R8 + SHRQ $51,CX + ADDQ R10,CX + ANDQ DX,R8 + MOVQ CX,R9 + SHRQ $51,CX + ADDQ R12,CX + ANDQ DX,R9 + MOVQ CX,AX + SHRQ $51,CX + ADDQ R14,CX + ANDQ DX,AX + MOVQ CX,R10 + SHRQ $51,CX + IMUL3Q $19,CX,CX + ADDQ CX,SI + ANDQ DX,R10 + MOVQ SI,120(SP) + MOVQ R8,128(SP) + MOVQ R9,136(SP) + MOVQ AX,144(SP) + MOVQ R10,152(SP) + MOVQ SI,SI + MOVQ R8,DX + MOVQ R9,CX + MOVQ AX,R8 + MOVQ R10,R9 + ADDQ ·_2P0(SB),SI + ADDQ ·_2P1234(SB),DX + ADDQ ·_2P1234(SB),CX + ADDQ ·_2P1234(SB),R8 + ADDQ ·_2P1234(SB),R9 + SUBQ 80(SP),SI + SUBQ 88(SP),DX + SUBQ 96(SP),CX + SUBQ 104(SP),R8 + SUBQ 112(SP),R9 + MOVQ SI,160(SP) + MOVQ DX,168(SP) + MOVQ CX,176(SP) + MOVQ R8,184(SP) + MOVQ R9,192(SP) + MOVQ 120(DI),SI + MOVQ 128(DI),DX + MOVQ 136(DI),CX + MOVQ 144(DI),R8 + MOVQ 152(DI),R9 + MOVQ SI,AX + MOVQ DX,R10 + MOVQ CX,R11 + MOVQ R8,R12 + MOVQ R9,R13 + ADDQ ·_2P0(SB),AX + ADDQ ·_2P1234(SB),R10 + ADDQ ·_2P1234(SB),R11 + ADDQ ·_2P1234(SB),R12 + ADDQ ·_2P1234(SB),R13 + ADDQ 160(DI),SI + ADDQ 168(DI),DX + ADDQ 176(DI),CX + ADDQ 184(DI),R8 + ADDQ 192(DI),R9 + SUBQ 160(DI),AX + SUBQ 168(DI),R10 + SUBQ 176(DI),R11 + SUBQ 184(DI),R12 + SUBQ 192(DI),R13 + MOVQ SI,200(SP) + MOVQ DX,208(SP) + MOVQ CX,216(SP) + MOVQ R8,224(SP) + MOVQ R9,232(SP) + MOVQ AX,240(SP) + MOVQ R10,248(SP) + MOVQ R11,256(SP) + MOVQ R12,264(SP) + MOVQ R13,272(SP) + MOVQ 224(SP),SI + IMUL3Q $19,SI,AX + MOVQ AX,280(SP) + MULQ 56(SP) + MOVQ AX,SI + MOVQ DX,CX + MOVQ 232(SP),DX + IMUL3Q $19,DX,AX + MOVQ AX,288(SP) + MULQ 48(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 200(SP),AX + MULQ 40(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 200(SP),AX + MULQ 48(SP) + MOVQ AX,R8 + MOVQ DX,R9 + MOVQ 200(SP),AX + MULQ 56(SP) + MOVQ AX,R10 + MOVQ DX,R11 + MOVQ 200(SP),AX + MULQ 64(SP) + MOVQ AX,R12 + MOVQ DX,R13 + MOVQ 200(SP),AX + MULQ 72(SP) + MOVQ AX,R14 + MOVQ DX,R15 + MOVQ 208(SP),AX + MULQ 40(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 208(SP),AX + MULQ 48(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 208(SP),AX + MULQ 56(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 208(SP),AX + MULQ 64(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 208(SP),DX + IMUL3Q $19,DX,AX + MULQ 72(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 216(SP),AX + MULQ 40(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 216(SP),AX + MULQ 48(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 216(SP),AX + MULQ 56(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 216(SP),DX + IMUL3Q $19,DX,AX + MULQ 64(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 216(SP),DX + IMUL3Q $19,DX,AX + MULQ 72(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 224(SP),AX + MULQ 40(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 224(SP),AX + MULQ 48(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 280(SP),AX + MULQ 64(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 280(SP),AX + MULQ 72(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 232(SP),AX + MULQ 40(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 288(SP),AX + MULQ 56(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 288(SP),AX + MULQ 64(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 288(SP),AX + MULQ 72(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ $REDMASK51,DX + SHLQ $13,SI,CX + ANDQ DX,SI + SHLQ $13,R8,R9 + ANDQ DX,R8 + ADDQ CX,R8 + SHLQ $13,R10,R11 + ANDQ DX,R10 + ADDQ R9,R10 + SHLQ $13,R12,R13 + ANDQ DX,R12 + ADDQ R11,R12 + SHLQ $13,R14,R15 + ANDQ DX,R14 + ADDQ R13,R14 + IMUL3Q $19,R15,CX + ADDQ CX,SI + MOVQ SI,CX + SHRQ $51,CX + ADDQ R8,CX + MOVQ CX,R8 + SHRQ $51,CX + ANDQ DX,SI + ADDQ R10,CX + MOVQ CX,R9 + SHRQ $51,CX + ANDQ DX,R8 + ADDQ R12,CX + MOVQ CX,AX + SHRQ $51,CX + ANDQ DX,R9 + ADDQ R14,CX + MOVQ CX,R10 + SHRQ $51,CX + ANDQ DX,AX + IMUL3Q $19,CX,CX + ADDQ CX,SI + ANDQ DX,R10 + MOVQ SI,40(SP) + MOVQ R8,48(SP) + MOVQ R9,56(SP) + MOVQ AX,64(SP) + MOVQ R10,72(SP) + MOVQ 264(SP),SI + IMUL3Q $19,SI,AX + MOVQ AX,200(SP) + MULQ 16(SP) + MOVQ AX,SI + MOVQ DX,CX + MOVQ 272(SP),DX + IMUL3Q $19,DX,AX + MOVQ AX,208(SP) + MULQ 8(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 240(SP),AX + MULQ 0(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 240(SP),AX + MULQ 8(SP) + MOVQ AX,R8 + MOVQ DX,R9 + MOVQ 240(SP),AX + MULQ 16(SP) + MOVQ AX,R10 + MOVQ DX,R11 + MOVQ 240(SP),AX + MULQ 24(SP) + MOVQ AX,R12 + MOVQ DX,R13 + MOVQ 240(SP),AX + MULQ 32(SP) + MOVQ AX,R14 + MOVQ DX,R15 + MOVQ 248(SP),AX + MULQ 0(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 248(SP),AX + MULQ 8(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 248(SP),AX + MULQ 16(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 248(SP),AX + MULQ 24(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 248(SP),DX + IMUL3Q $19,DX,AX + MULQ 32(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 256(SP),AX + MULQ 0(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 256(SP),AX + MULQ 8(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 256(SP),AX + MULQ 16(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 256(SP),DX + IMUL3Q $19,DX,AX + MULQ 24(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 256(SP),DX + IMUL3Q $19,DX,AX + MULQ 32(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 264(SP),AX + MULQ 0(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 264(SP),AX + MULQ 8(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 200(SP),AX + MULQ 24(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 200(SP),AX + MULQ 32(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 272(SP),AX + MULQ 0(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 208(SP),AX + MULQ 16(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 208(SP),AX + MULQ 24(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 208(SP),AX + MULQ 32(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ $REDMASK51,DX + SHLQ $13,SI,CX + ANDQ DX,SI + SHLQ $13,R8,R9 + ANDQ DX,R8 + ADDQ CX,R8 + SHLQ $13,R10,R11 + ANDQ DX,R10 + ADDQ R9,R10 + SHLQ $13,R12,R13 + ANDQ DX,R12 + ADDQ R11,R12 + SHLQ $13,R14,R15 + ANDQ DX,R14 + ADDQ R13,R14 + IMUL3Q $19,R15,CX + ADDQ CX,SI + MOVQ SI,CX + SHRQ $51,CX + ADDQ R8,CX + MOVQ CX,R8 + SHRQ $51,CX + ANDQ DX,SI + ADDQ R10,CX + MOVQ CX,R9 + SHRQ $51,CX + ANDQ DX,R8 + ADDQ R12,CX + MOVQ CX,AX + SHRQ $51,CX + ANDQ DX,R9 + ADDQ R14,CX + MOVQ CX,R10 + SHRQ $51,CX + ANDQ DX,AX + IMUL3Q $19,CX,CX + ADDQ CX,SI + ANDQ DX,R10 + MOVQ SI,DX + MOVQ R8,CX + MOVQ R9,R11 + MOVQ AX,R12 + MOVQ R10,R13 + ADDQ ·_2P0(SB),DX + ADDQ ·_2P1234(SB),CX + ADDQ ·_2P1234(SB),R11 + ADDQ ·_2P1234(SB),R12 + ADDQ ·_2P1234(SB),R13 + ADDQ 40(SP),SI + ADDQ 48(SP),R8 + ADDQ 56(SP),R9 + ADDQ 64(SP),AX + ADDQ 72(SP),R10 + SUBQ 40(SP),DX + SUBQ 48(SP),CX + SUBQ 56(SP),R11 + SUBQ 64(SP),R12 + SUBQ 72(SP),R13 + MOVQ SI,120(DI) + MOVQ R8,128(DI) + MOVQ R9,136(DI) + MOVQ AX,144(DI) + MOVQ R10,152(DI) + MOVQ DX,160(DI) + MOVQ CX,168(DI) + MOVQ R11,176(DI) + MOVQ R12,184(DI) + MOVQ R13,192(DI) + MOVQ 120(DI),AX + MULQ 120(DI) + MOVQ AX,SI + MOVQ DX,CX + MOVQ 120(DI),AX + SHLQ $1,AX + MULQ 128(DI) + MOVQ AX,R8 + MOVQ DX,R9 + MOVQ 120(DI),AX + SHLQ $1,AX + MULQ 136(DI) + MOVQ AX,R10 + MOVQ DX,R11 + MOVQ 120(DI),AX + SHLQ $1,AX + MULQ 144(DI) + MOVQ AX,R12 + MOVQ DX,R13 + MOVQ 120(DI),AX + SHLQ $1,AX + MULQ 152(DI) + MOVQ AX,R14 + MOVQ DX,R15 + MOVQ 128(DI),AX + MULQ 128(DI) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 128(DI),AX + SHLQ $1,AX + MULQ 136(DI) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 128(DI),AX + SHLQ $1,AX + MULQ 144(DI) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 128(DI),DX + IMUL3Q $38,DX,AX + MULQ 152(DI) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 136(DI),AX + MULQ 136(DI) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 136(DI),DX + IMUL3Q $38,DX,AX + MULQ 144(DI) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 136(DI),DX + IMUL3Q $38,DX,AX + MULQ 152(DI) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 144(DI),DX + IMUL3Q $19,DX,AX + MULQ 144(DI) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 144(DI),DX + IMUL3Q $38,DX,AX + MULQ 152(DI) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 152(DI),DX + IMUL3Q $19,DX,AX + MULQ 152(DI) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ $REDMASK51,DX + SHLQ $13,SI,CX + ANDQ DX,SI + SHLQ $13,R8,R9 + ANDQ DX,R8 + ADDQ CX,R8 + SHLQ $13,R10,R11 + ANDQ DX,R10 + ADDQ R9,R10 + SHLQ $13,R12,R13 + ANDQ DX,R12 + ADDQ R11,R12 + SHLQ $13,R14,R15 + ANDQ DX,R14 + ADDQ R13,R14 + IMUL3Q $19,R15,CX + ADDQ CX,SI + MOVQ SI,CX + SHRQ $51,CX + ADDQ R8,CX + ANDQ DX,SI + MOVQ CX,R8 + SHRQ $51,CX + ADDQ R10,CX + ANDQ DX,R8 + MOVQ CX,R9 + SHRQ $51,CX + ADDQ R12,CX + ANDQ DX,R9 + MOVQ CX,AX + SHRQ $51,CX + ADDQ R14,CX + ANDQ DX,AX + MOVQ CX,R10 + SHRQ $51,CX + IMUL3Q $19,CX,CX + ADDQ CX,SI + ANDQ DX,R10 + MOVQ SI,120(DI) + MOVQ R8,128(DI) + MOVQ R9,136(DI) + MOVQ AX,144(DI) + MOVQ R10,152(DI) + MOVQ 160(DI),AX + MULQ 160(DI) + MOVQ AX,SI + MOVQ DX,CX + MOVQ 160(DI),AX + SHLQ $1,AX + MULQ 168(DI) + MOVQ AX,R8 + MOVQ DX,R9 + MOVQ 160(DI),AX + SHLQ $1,AX + MULQ 176(DI) + MOVQ AX,R10 + MOVQ DX,R11 + MOVQ 160(DI),AX + SHLQ $1,AX + MULQ 184(DI) + MOVQ AX,R12 + MOVQ DX,R13 + MOVQ 160(DI),AX + SHLQ $1,AX + MULQ 192(DI) + MOVQ AX,R14 + MOVQ DX,R15 + MOVQ 168(DI),AX + MULQ 168(DI) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 168(DI),AX + SHLQ $1,AX + MULQ 176(DI) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 168(DI),AX + SHLQ $1,AX + MULQ 184(DI) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 168(DI),DX + IMUL3Q $38,DX,AX + MULQ 192(DI) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 176(DI),AX + MULQ 176(DI) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 176(DI),DX + IMUL3Q $38,DX,AX + MULQ 184(DI) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 176(DI),DX + IMUL3Q $38,DX,AX + MULQ 192(DI) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 184(DI),DX + IMUL3Q $19,DX,AX + MULQ 184(DI) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 184(DI),DX + IMUL3Q $38,DX,AX + MULQ 192(DI) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 192(DI),DX + IMUL3Q $19,DX,AX + MULQ 192(DI) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ $REDMASK51,DX + SHLQ $13,SI,CX + ANDQ DX,SI + SHLQ $13,R8,R9 + ANDQ DX,R8 + ADDQ CX,R8 + SHLQ $13,R10,R11 + ANDQ DX,R10 + ADDQ R9,R10 + SHLQ $13,R12,R13 + ANDQ DX,R12 + ADDQ R11,R12 + SHLQ $13,R14,R15 + ANDQ DX,R14 + ADDQ R13,R14 + IMUL3Q $19,R15,CX + ADDQ CX,SI + MOVQ SI,CX + SHRQ $51,CX + ADDQ R8,CX + ANDQ DX,SI + MOVQ CX,R8 + SHRQ $51,CX + ADDQ R10,CX + ANDQ DX,R8 + MOVQ CX,R9 + SHRQ $51,CX + ADDQ R12,CX + ANDQ DX,R9 + MOVQ CX,AX + SHRQ $51,CX + ADDQ R14,CX + ANDQ DX,AX + MOVQ CX,R10 + SHRQ $51,CX + IMUL3Q $19,CX,CX + ADDQ CX,SI + ANDQ DX,R10 + MOVQ SI,160(DI) + MOVQ R8,168(DI) + MOVQ R9,176(DI) + MOVQ AX,184(DI) + MOVQ R10,192(DI) + MOVQ 184(DI),SI + IMUL3Q $19,SI,AX + MOVQ AX,0(SP) + MULQ 16(DI) + MOVQ AX,SI + MOVQ DX,CX + MOVQ 192(DI),DX + IMUL3Q $19,DX,AX + MOVQ AX,8(SP) + MULQ 8(DI) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 160(DI),AX + MULQ 0(DI) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 160(DI),AX + MULQ 8(DI) + MOVQ AX,R8 + MOVQ DX,R9 + MOVQ 160(DI),AX + MULQ 16(DI) + MOVQ AX,R10 + MOVQ DX,R11 + MOVQ 160(DI),AX + MULQ 24(DI) + MOVQ AX,R12 + MOVQ DX,R13 + MOVQ 160(DI),AX + MULQ 32(DI) + MOVQ AX,R14 + MOVQ DX,R15 + MOVQ 168(DI),AX + MULQ 0(DI) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 168(DI),AX + MULQ 8(DI) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 168(DI),AX + MULQ 16(DI) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 168(DI),AX + MULQ 24(DI) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 168(DI),DX + IMUL3Q $19,DX,AX + MULQ 32(DI) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 176(DI),AX + MULQ 0(DI) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 176(DI),AX + MULQ 8(DI) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 176(DI),AX + MULQ 16(DI) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 176(DI),DX + IMUL3Q $19,DX,AX + MULQ 24(DI) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 176(DI),DX + IMUL3Q $19,DX,AX + MULQ 32(DI) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 184(DI),AX + MULQ 0(DI) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 184(DI),AX + MULQ 8(DI) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 0(SP),AX + MULQ 24(DI) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 0(SP),AX + MULQ 32(DI) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 192(DI),AX + MULQ 0(DI) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 8(SP),AX + MULQ 16(DI) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 8(SP),AX + MULQ 24(DI) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 8(SP),AX + MULQ 32(DI) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ $REDMASK51,DX + SHLQ $13,SI,CX + ANDQ DX,SI + SHLQ $13,R8,R9 + ANDQ DX,R8 + ADDQ CX,R8 + SHLQ $13,R10,R11 + ANDQ DX,R10 + ADDQ R9,R10 + SHLQ $13,R12,R13 + ANDQ DX,R12 + ADDQ R11,R12 + SHLQ $13,R14,R15 + ANDQ DX,R14 + ADDQ R13,R14 + IMUL3Q $19,R15,CX + ADDQ CX,SI + MOVQ SI,CX + SHRQ $51,CX + ADDQ R8,CX + MOVQ CX,R8 + SHRQ $51,CX + ANDQ DX,SI + ADDQ R10,CX + MOVQ CX,R9 + SHRQ $51,CX + ANDQ DX,R8 + ADDQ R12,CX + MOVQ CX,AX + SHRQ $51,CX + ANDQ DX,R9 + ADDQ R14,CX + MOVQ CX,R10 + SHRQ $51,CX + ANDQ DX,AX + IMUL3Q $19,CX,CX + ADDQ CX,SI + ANDQ DX,R10 + MOVQ SI,160(DI) + MOVQ R8,168(DI) + MOVQ R9,176(DI) + MOVQ AX,184(DI) + MOVQ R10,192(DI) + MOVQ 144(SP),SI + IMUL3Q $19,SI,AX + MOVQ AX,0(SP) + MULQ 96(SP) + MOVQ AX,SI + MOVQ DX,CX + MOVQ 152(SP),DX + IMUL3Q $19,DX,AX + MOVQ AX,8(SP) + MULQ 88(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 120(SP),AX + MULQ 80(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 120(SP),AX + MULQ 88(SP) + MOVQ AX,R8 + MOVQ DX,R9 + MOVQ 120(SP),AX + MULQ 96(SP) + MOVQ AX,R10 + MOVQ DX,R11 + MOVQ 120(SP),AX + MULQ 104(SP) + MOVQ AX,R12 + MOVQ DX,R13 + MOVQ 120(SP),AX + MULQ 112(SP) + MOVQ AX,R14 + MOVQ DX,R15 + MOVQ 128(SP),AX + MULQ 80(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 128(SP),AX + MULQ 88(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 128(SP),AX + MULQ 96(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 128(SP),AX + MULQ 104(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 128(SP),DX + IMUL3Q $19,DX,AX + MULQ 112(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 136(SP),AX + MULQ 80(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 136(SP),AX + MULQ 88(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 136(SP),AX + MULQ 96(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 136(SP),DX + IMUL3Q $19,DX,AX + MULQ 104(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 136(SP),DX + IMUL3Q $19,DX,AX + MULQ 112(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 144(SP),AX + MULQ 80(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 144(SP),AX + MULQ 88(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 0(SP),AX + MULQ 104(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 0(SP),AX + MULQ 112(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 152(SP),AX + MULQ 80(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 8(SP),AX + MULQ 96(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 8(SP),AX + MULQ 104(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 8(SP),AX + MULQ 112(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ $REDMASK51,DX + SHLQ $13,SI,CX + ANDQ DX,SI + SHLQ $13,R8,R9 + ANDQ DX,R8 + ADDQ CX,R8 + SHLQ $13,R10,R11 + ANDQ DX,R10 + ADDQ R9,R10 + SHLQ $13,R12,R13 + ANDQ DX,R12 + ADDQ R11,R12 + SHLQ $13,R14,R15 + ANDQ DX,R14 + ADDQ R13,R14 + IMUL3Q $19,R15,CX + ADDQ CX,SI + MOVQ SI,CX + SHRQ $51,CX + ADDQ R8,CX + MOVQ CX,R8 + SHRQ $51,CX + ANDQ DX,SI + ADDQ R10,CX + MOVQ CX,R9 + SHRQ $51,CX + ANDQ DX,R8 + ADDQ R12,CX + MOVQ CX,AX + SHRQ $51,CX + ANDQ DX,R9 + ADDQ R14,CX + MOVQ CX,R10 + SHRQ $51,CX + ANDQ DX,AX + IMUL3Q $19,CX,CX + ADDQ CX,SI + ANDQ DX,R10 + MOVQ SI,40(DI) + MOVQ R8,48(DI) + MOVQ R9,56(DI) + MOVQ AX,64(DI) + MOVQ R10,72(DI) + MOVQ 160(SP),AX + MULQ ·_121666_213(SB) + SHRQ $13,AX + MOVQ AX,SI + MOVQ DX,CX + MOVQ 168(SP),AX + MULQ ·_121666_213(SB) + SHRQ $13,AX + ADDQ AX,CX + MOVQ DX,R8 + MOVQ 176(SP),AX + MULQ ·_121666_213(SB) + SHRQ $13,AX + ADDQ AX,R8 + MOVQ DX,R9 + MOVQ 184(SP),AX + MULQ ·_121666_213(SB) + SHRQ $13,AX + ADDQ AX,R9 + MOVQ DX,R10 + MOVQ 192(SP),AX + MULQ ·_121666_213(SB) + SHRQ $13,AX + ADDQ AX,R10 + IMUL3Q $19,DX,DX + ADDQ DX,SI + ADDQ 80(SP),SI + ADDQ 88(SP),CX + ADDQ 96(SP),R8 + ADDQ 104(SP),R9 + ADDQ 112(SP),R10 + MOVQ SI,80(DI) + MOVQ CX,88(DI) + MOVQ R8,96(DI) + MOVQ R9,104(DI) + MOVQ R10,112(DI) + MOVQ 104(DI),SI + IMUL3Q $19,SI,AX + MOVQ AX,0(SP) + MULQ 176(SP) + MOVQ AX,SI + MOVQ DX,CX + MOVQ 112(DI),DX + IMUL3Q $19,DX,AX + MOVQ AX,8(SP) + MULQ 168(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 80(DI),AX + MULQ 160(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 80(DI),AX + MULQ 168(SP) + MOVQ AX,R8 + MOVQ DX,R9 + MOVQ 80(DI),AX + MULQ 176(SP) + MOVQ AX,R10 + MOVQ DX,R11 + MOVQ 80(DI),AX + MULQ 184(SP) + MOVQ AX,R12 + MOVQ DX,R13 + MOVQ 80(DI),AX + MULQ 192(SP) + MOVQ AX,R14 + MOVQ DX,R15 + MOVQ 88(DI),AX + MULQ 160(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 88(DI),AX + MULQ 168(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 88(DI),AX + MULQ 176(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 88(DI),AX + MULQ 184(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 88(DI),DX + IMUL3Q $19,DX,AX + MULQ 192(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 96(DI),AX + MULQ 160(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 96(DI),AX + MULQ 168(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 96(DI),AX + MULQ 176(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 96(DI),DX + IMUL3Q $19,DX,AX + MULQ 184(SP) + ADDQ AX,SI + ADCQ DX,CX + MOVQ 96(DI),DX + IMUL3Q $19,DX,AX + MULQ 192(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 104(DI),AX + MULQ 160(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 104(DI),AX + MULQ 168(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 0(SP),AX + MULQ 184(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 0(SP),AX + MULQ 192(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 112(DI),AX + MULQ 160(SP) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 8(SP),AX + MULQ 176(SP) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 8(SP),AX + MULQ 184(SP) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 8(SP),AX + MULQ 192(SP) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ $REDMASK51,DX + SHLQ $13,SI,CX + ANDQ DX,SI + SHLQ $13,R8,R9 + ANDQ DX,R8 + ADDQ CX,R8 + SHLQ $13,R10,R11 + ANDQ DX,R10 + ADDQ R9,R10 + SHLQ $13,R12,R13 + ANDQ DX,R12 + ADDQ R11,R12 + SHLQ $13,R14,R15 + ANDQ DX,R14 + ADDQ R13,R14 + IMUL3Q $19,R15,CX + ADDQ CX,SI + MOVQ SI,CX + SHRQ $51,CX + ADDQ R8,CX + MOVQ CX,R8 + SHRQ $51,CX + ANDQ DX,SI + ADDQ R10,CX + MOVQ CX,R9 + SHRQ $51,CX + ANDQ DX,R8 + ADDQ R12,CX + MOVQ CX,AX + SHRQ $51,CX + ANDQ DX,R9 + ADDQ R14,CX + MOVQ CX,R10 + SHRQ $51,CX + ANDQ DX,AX + IMUL3Q $19,CX,CX + ADDQ CX,SI + ANDQ DX,R10 + MOVQ SI,80(DI) + MOVQ R8,88(DI) + MOVQ R9,96(DI) + MOVQ AX,104(DI) + MOVQ R10,112(DI) + RET diff --git a/vendor/golang.org/x/crypto/curve25519/mont25519_amd64.go b/vendor/golang.org/x/crypto/curve25519/mont25519_amd64.go new file mode 100644 index 0000000..5822bd5 --- /dev/null +++ b/vendor/golang.org/x/crypto/curve25519/mont25519_amd64.go @@ -0,0 +1,240 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build amd64,!gccgo,!appengine + +package curve25519 + +// These functions are implemented in the .s files. The names of the functions +// in the rest of the file are also taken from the SUPERCOP sources to help +// people following along. + +//go:noescape + +func cswap(inout *[5]uint64, v uint64) + +//go:noescape + +func ladderstep(inout *[5][5]uint64) + +//go:noescape + +func freeze(inout *[5]uint64) + +//go:noescape + +func mul(dest, a, b *[5]uint64) + +//go:noescape + +func square(out, in *[5]uint64) + +// mladder uses a Montgomery ladder to calculate (xr/zr) *= s. +func mladder(xr, zr *[5]uint64, s *[32]byte) { + var work [5][5]uint64 + + work[0] = *xr + setint(&work[1], 1) + setint(&work[2], 0) + work[3] = *xr + setint(&work[4], 1) + + j := uint(6) + var prevbit byte + + for i := 31; i >= 0; i-- { + for j < 8 { + bit := ((*s)[i] >> j) & 1 + swap := bit ^ prevbit + prevbit = bit + cswap(&work[1], uint64(swap)) + ladderstep(&work) + j-- + } + j = 7 + } + + *xr = work[1] + *zr = work[2] +} + +func scalarMult(out, in, base *[32]byte) { + var e [32]byte + copy(e[:], (*in)[:]) + e[0] &= 248 + e[31] &= 127 + e[31] |= 64 + + var t, z [5]uint64 + unpack(&t, base) + mladder(&t, &z, &e) + invert(&z, &z) + mul(&t, &t, &z) + pack(out, &t) +} + +func setint(r *[5]uint64, v uint64) { + r[0] = v + r[1] = 0 + r[2] = 0 + r[3] = 0 + r[4] = 0 +} + +// unpack sets r = x where r consists of 5, 51-bit limbs in little-endian +// order. +func unpack(r *[5]uint64, x *[32]byte) { + r[0] = uint64(x[0]) | + uint64(x[1])<<8 | + uint64(x[2])<<16 | + uint64(x[3])<<24 | + uint64(x[4])<<32 | + uint64(x[5])<<40 | + uint64(x[6]&7)<<48 + + r[1] = uint64(x[6])>>3 | + uint64(x[7])<<5 | + uint64(x[8])<<13 | + uint64(x[9])<<21 | + uint64(x[10])<<29 | + uint64(x[11])<<37 | + uint64(x[12]&63)<<45 + + r[2] = uint64(x[12])>>6 | + uint64(x[13])<<2 | + uint64(x[14])<<10 | + uint64(x[15])<<18 | + uint64(x[16])<<26 | + uint64(x[17])<<34 | + uint64(x[18])<<42 | + uint64(x[19]&1)<<50 + + r[3] = uint64(x[19])>>1 | + uint64(x[20])<<7 | + uint64(x[21])<<15 | + uint64(x[22])<<23 | + uint64(x[23])<<31 | + uint64(x[24])<<39 | + uint64(x[25]&15)<<47 + + r[4] = uint64(x[25])>>4 | + uint64(x[26])<<4 | + uint64(x[27])<<12 | + uint64(x[28])<<20 | + uint64(x[29])<<28 | + uint64(x[30])<<36 | + uint64(x[31]&127)<<44 +} + +// pack sets out = x where out is the usual, little-endian form of the 5, +// 51-bit limbs in x. +func pack(out *[32]byte, x *[5]uint64) { + t := *x + freeze(&t) + + out[0] = byte(t[0]) + out[1] = byte(t[0] >> 8) + out[2] = byte(t[0] >> 16) + out[3] = byte(t[0] >> 24) + out[4] = byte(t[0] >> 32) + out[5] = byte(t[0] >> 40) + out[6] = byte(t[0] >> 48) + + out[6] ^= byte(t[1]<<3) & 0xf8 + out[7] = byte(t[1] >> 5) + out[8] = byte(t[1] >> 13) + out[9] = byte(t[1] >> 21) + out[10] = byte(t[1] >> 29) + out[11] = byte(t[1] >> 37) + out[12] = byte(t[1] >> 45) + + out[12] ^= byte(t[2]<<6) & 0xc0 + out[13] = byte(t[2] >> 2) + out[14] = byte(t[2] >> 10) + out[15] = byte(t[2] >> 18) + out[16] = byte(t[2] >> 26) + out[17] = byte(t[2] >> 34) + out[18] = byte(t[2] >> 42) + out[19] = byte(t[2] >> 50) + + out[19] ^= byte(t[3]<<1) & 0xfe + out[20] = byte(t[3] >> 7) + out[21] = byte(t[3] >> 15) + out[22] = byte(t[3] >> 23) + out[23] = byte(t[3] >> 31) + out[24] = byte(t[3] >> 39) + out[25] = byte(t[3] >> 47) + + out[25] ^= byte(t[4]<<4) & 0xf0 + out[26] = byte(t[4] >> 4) + out[27] = byte(t[4] >> 12) + out[28] = byte(t[4] >> 20) + out[29] = byte(t[4] >> 28) + out[30] = byte(t[4] >> 36) + out[31] = byte(t[4] >> 44) +} + +// invert calculates r = x^-1 mod p using Fermat's little theorem. +func invert(r *[5]uint64, x *[5]uint64) { + var z2, z9, z11, z2_5_0, z2_10_0, z2_20_0, z2_50_0, z2_100_0, t [5]uint64 + + square(&z2, x) /* 2 */ + square(&t, &z2) /* 4 */ + square(&t, &t) /* 8 */ + mul(&z9, &t, x) /* 9 */ + mul(&z11, &z9, &z2) /* 11 */ + square(&t, &z11) /* 22 */ + mul(&z2_5_0, &t, &z9) /* 2^5 - 2^0 = 31 */ + + square(&t, &z2_5_0) /* 2^6 - 2^1 */ + for i := 1; i < 5; i++ { /* 2^20 - 2^10 */ + square(&t, &t) + } + mul(&z2_10_0, &t, &z2_5_0) /* 2^10 - 2^0 */ + + square(&t, &z2_10_0) /* 2^11 - 2^1 */ + for i := 1; i < 10; i++ { /* 2^20 - 2^10 */ + square(&t, &t) + } + mul(&z2_20_0, &t, &z2_10_0) /* 2^20 - 2^0 */ + + square(&t, &z2_20_0) /* 2^21 - 2^1 */ + for i := 1; i < 20; i++ { /* 2^40 - 2^20 */ + square(&t, &t) + } + mul(&t, &t, &z2_20_0) /* 2^40 - 2^0 */ + + square(&t, &t) /* 2^41 - 2^1 */ + for i := 1; i < 10; i++ { /* 2^50 - 2^10 */ + square(&t, &t) + } + mul(&z2_50_0, &t, &z2_10_0) /* 2^50 - 2^0 */ + + square(&t, &z2_50_0) /* 2^51 - 2^1 */ + for i := 1; i < 50; i++ { /* 2^100 - 2^50 */ + square(&t, &t) + } + mul(&z2_100_0, &t, &z2_50_0) /* 2^100 - 2^0 */ + + square(&t, &z2_100_0) /* 2^101 - 2^1 */ + for i := 1; i < 100; i++ { /* 2^200 - 2^100 */ + square(&t, &t) + } + mul(&t, &t, &z2_100_0) /* 2^200 - 2^0 */ + + square(&t, &t) /* 2^201 - 2^1 */ + for i := 1; i < 50; i++ { /* 2^250 - 2^50 */ + square(&t, &t) + } + mul(&t, &t, &z2_50_0) /* 2^250 - 2^0 */ + + square(&t, &t) /* 2^251 - 2^1 */ + square(&t, &t) /* 2^252 - 2^2 */ + square(&t, &t) /* 2^253 - 2^3 */ + + square(&t, &t) /* 2^254 - 2^4 */ + + square(&t, &t) /* 2^255 - 2^5 */ + mul(r, &t, &z11) /* 2^255 - 21 */ +} diff --git a/vendor/golang.org/x/crypto/curve25519/mul_amd64.s b/vendor/golang.org/x/crypto/curve25519/mul_amd64.s new file mode 100644 index 0000000..1f76d1a --- /dev/null +++ b/vendor/golang.org/x/crypto/curve25519/mul_amd64.s @@ -0,0 +1,169 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// This code was translated into a form compatible with 6a from the public +// domain sources in SUPERCOP: https://bench.cr.yp.to/supercop.html + +// +build amd64,!gccgo,!appengine + +#include "const_amd64.h" + +// func mul(dest, a, b *[5]uint64) +TEXT ·mul(SB),0,$16-24 + MOVQ dest+0(FP), DI + MOVQ a+8(FP), SI + MOVQ b+16(FP), DX + + MOVQ DX,CX + MOVQ 24(SI),DX + IMUL3Q $19,DX,AX + MOVQ AX,0(SP) + MULQ 16(CX) + MOVQ AX,R8 + MOVQ DX,R9 + MOVQ 32(SI),DX + IMUL3Q $19,DX,AX + MOVQ AX,8(SP) + MULQ 8(CX) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 0(SI),AX + MULQ 0(CX) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 0(SI),AX + MULQ 8(CX) + MOVQ AX,R10 + MOVQ DX,R11 + MOVQ 0(SI),AX + MULQ 16(CX) + MOVQ AX,R12 + MOVQ DX,R13 + MOVQ 0(SI),AX + MULQ 24(CX) + MOVQ AX,R14 + MOVQ DX,R15 + MOVQ 0(SI),AX + MULQ 32(CX) + MOVQ AX,BX + MOVQ DX,BP + MOVQ 8(SI),AX + MULQ 0(CX) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 8(SI),AX + MULQ 8(CX) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 8(SI),AX + MULQ 16(CX) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 8(SI),AX + MULQ 24(CX) + ADDQ AX,BX + ADCQ DX,BP + MOVQ 8(SI),DX + IMUL3Q $19,DX,AX + MULQ 32(CX) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 16(SI),AX + MULQ 0(CX) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 16(SI),AX + MULQ 8(CX) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 16(SI),AX + MULQ 16(CX) + ADDQ AX,BX + ADCQ DX,BP + MOVQ 16(SI),DX + IMUL3Q $19,DX,AX + MULQ 24(CX) + ADDQ AX,R8 + ADCQ DX,R9 + MOVQ 16(SI),DX + IMUL3Q $19,DX,AX + MULQ 32(CX) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 24(SI),AX + MULQ 0(CX) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ 24(SI),AX + MULQ 8(CX) + ADDQ AX,BX + ADCQ DX,BP + MOVQ 0(SP),AX + MULQ 24(CX) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 0(SP),AX + MULQ 32(CX) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 32(SI),AX + MULQ 0(CX) + ADDQ AX,BX + ADCQ DX,BP + MOVQ 8(SP),AX + MULQ 16(CX) + ADDQ AX,R10 + ADCQ DX,R11 + MOVQ 8(SP),AX + MULQ 24(CX) + ADDQ AX,R12 + ADCQ DX,R13 + MOVQ 8(SP),AX + MULQ 32(CX) + ADDQ AX,R14 + ADCQ DX,R15 + MOVQ $REDMASK51,SI + SHLQ $13,R8,R9 + ANDQ SI,R8 + SHLQ $13,R10,R11 + ANDQ SI,R10 + ADDQ R9,R10 + SHLQ $13,R12,R13 + ANDQ SI,R12 + ADDQ R11,R12 + SHLQ $13,R14,R15 + ANDQ SI,R14 + ADDQ R13,R14 + SHLQ $13,BX,BP + ANDQ SI,BX + ADDQ R15,BX + IMUL3Q $19,BP,DX + ADDQ DX,R8 + MOVQ R8,DX + SHRQ $51,DX + ADDQ R10,DX + MOVQ DX,CX + SHRQ $51,DX + ANDQ SI,R8 + ADDQ R12,DX + MOVQ DX,R9 + SHRQ $51,DX + ANDQ SI,CX + ADDQ R14,DX + MOVQ DX,AX + SHRQ $51,DX + ANDQ SI,R9 + ADDQ BX,DX + MOVQ DX,R10 + SHRQ $51,DX + ANDQ SI,AX + IMUL3Q $19,DX,DX + ADDQ DX,R8 + ANDQ SI,R10 + MOVQ R8,0(DI) + MOVQ CX,8(DI) + MOVQ R9,16(DI) + MOVQ AX,24(DI) + MOVQ R10,32(DI) + RET diff --git a/vendor/golang.org/x/crypto/curve25519/square_amd64.s b/vendor/golang.org/x/crypto/curve25519/square_amd64.s new file mode 100644 index 0000000..07511a4 --- /dev/null +++ b/vendor/golang.org/x/crypto/curve25519/square_amd64.s @@ -0,0 +1,132 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// This code was translated into a form compatible with 6a from the public +// domain sources in SUPERCOP: https://bench.cr.yp.to/supercop.html + +// +build amd64,!gccgo,!appengine + +#include "const_amd64.h" + +// func square(out, in *[5]uint64) +TEXT ·square(SB),7,$0-16 + MOVQ out+0(FP), DI + MOVQ in+8(FP), SI + + MOVQ 0(SI),AX + MULQ 0(SI) + MOVQ AX,CX + MOVQ DX,R8 + MOVQ 0(SI),AX + SHLQ $1,AX + MULQ 8(SI) + MOVQ AX,R9 + MOVQ DX,R10 + MOVQ 0(SI),AX + SHLQ $1,AX + MULQ 16(SI) + MOVQ AX,R11 + MOVQ DX,R12 + MOVQ 0(SI),AX + SHLQ $1,AX + MULQ 24(SI) + MOVQ AX,R13 + MOVQ DX,R14 + MOVQ 0(SI),AX + SHLQ $1,AX + MULQ 32(SI) + MOVQ AX,R15 + MOVQ DX,BX + MOVQ 8(SI),AX + MULQ 8(SI) + ADDQ AX,R11 + ADCQ DX,R12 + MOVQ 8(SI),AX + SHLQ $1,AX + MULQ 16(SI) + ADDQ AX,R13 + ADCQ DX,R14 + MOVQ 8(SI),AX + SHLQ $1,AX + MULQ 24(SI) + ADDQ AX,R15 + ADCQ DX,BX + MOVQ 8(SI),DX + IMUL3Q $38,DX,AX + MULQ 32(SI) + ADDQ AX,CX + ADCQ DX,R8 + MOVQ 16(SI),AX + MULQ 16(SI) + ADDQ AX,R15 + ADCQ DX,BX + MOVQ 16(SI),DX + IMUL3Q $38,DX,AX + MULQ 24(SI) + ADDQ AX,CX + ADCQ DX,R8 + MOVQ 16(SI),DX + IMUL3Q $38,DX,AX + MULQ 32(SI) + ADDQ AX,R9 + ADCQ DX,R10 + MOVQ 24(SI),DX + IMUL3Q $19,DX,AX + MULQ 24(SI) + ADDQ AX,R9 + ADCQ DX,R10 + MOVQ 24(SI),DX + IMUL3Q $38,DX,AX + MULQ 32(SI) + ADDQ AX,R11 + ADCQ DX,R12 + MOVQ 32(SI),DX + IMUL3Q $19,DX,AX + MULQ 32(SI) + ADDQ AX,R13 + ADCQ DX,R14 + MOVQ $REDMASK51,SI + SHLQ $13,CX,R8 + ANDQ SI,CX + SHLQ $13,R9,R10 + ANDQ SI,R9 + ADDQ R8,R9 + SHLQ $13,R11,R12 + ANDQ SI,R11 + ADDQ R10,R11 + SHLQ $13,R13,R14 + ANDQ SI,R13 + ADDQ R12,R13 + SHLQ $13,R15,BX + ANDQ SI,R15 + ADDQ R14,R15 + IMUL3Q $19,BX,DX + ADDQ DX,CX + MOVQ CX,DX + SHRQ $51,DX + ADDQ R9,DX + ANDQ SI,CX + MOVQ DX,R8 + SHRQ $51,DX + ADDQ R11,DX + ANDQ SI,R8 + MOVQ DX,R9 + SHRQ $51,DX + ADDQ R13,DX + ANDQ SI,R9 + MOVQ DX,AX + SHRQ $51,DX + ADDQ R15,DX + ANDQ SI,AX + MOVQ DX,R10 + SHRQ $51,DX + IMUL3Q $19,DX,DX + ADDQ DX,CX + ANDQ SI,R10 + MOVQ CX,0(DI) + MOVQ R8,8(DI) + MOVQ R9,16(DI) + MOVQ AX,24(DI) + MOVQ R10,32(DI) + RET diff --git a/vendor/golang.org/x/crypto/ed25519/ed25519.go b/vendor/golang.org/x/crypto/ed25519/ed25519.go new file mode 100644 index 0000000..c7f8c7e --- /dev/null +++ b/vendor/golang.org/x/crypto/ed25519/ed25519.go @@ -0,0 +1,222 @@ +// Copyright 2016 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// In Go 1.13, the ed25519 package was promoted to the standard library as +// crypto/ed25519, and this package became a wrapper for the standard library one. +// +// +build !go1.13 + +// Package ed25519 implements the Ed25519 signature algorithm. See +// https://ed25519.cr.yp.to/. +// +// These functions are also compatible with the “Ed25519” function defined in +// RFC 8032. However, unlike RFC 8032's formulation, this package's private key +// representation includes a public key suffix to make multiple signing +// operations with the same key more efficient. This package refers to the RFC +// 8032 private key as the “seed”. +package ed25519 + +// This code is a port of the public domain, “ref10” implementation of ed25519 +// from SUPERCOP. + +import ( + "bytes" + "crypto" + cryptorand "crypto/rand" + "crypto/sha512" + "errors" + "io" + "strconv" + + "golang.org/x/crypto/ed25519/internal/edwards25519" +) + +const ( + // PublicKeySize is the size, in bytes, of public keys as used in this package. + PublicKeySize = 32 + // PrivateKeySize is the size, in bytes, of private keys as used in this package. + PrivateKeySize = 64 + // SignatureSize is the size, in bytes, of signatures generated and verified by this package. + SignatureSize = 64 + // SeedSize is the size, in bytes, of private key seeds. These are the private key representations used by RFC 8032. + SeedSize = 32 +) + +// PublicKey is the type of Ed25519 public keys. +type PublicKey []byte + +// PrivateKey is the type of Ed25519 private keys. It implements crypto.Signer. +type PrivateKey []byte + +// Public returns the PublicKey corresponding to priv. +func (priv PrivateKey) Public() crypto.PublicKey { + publicKey := make([]byte, PublicKeySize) + copy(publicKey, priv[32:]) + return PublicKey(publicKey) +} + +// Seed returns the private key seed corresponding to priv. It is provided for +// interoperability with RFC 8032. RFC 8032's private keys correspond to seeds +// in this package. +func (priv PrivateKey) Seed() []byte { + seed := make([]byte, SeedSize) + copy(seed, priv[:32]) + return seed +} + +// Sign signs the given message with priv. +// Ed25519 performs two passes over messages to be signed and therefore cannot +// handle pre-hashed messages. Thus opts.HashFunc() must return zero to +// indicate the message hasn't been hashed. This can be achieved by passing +// crypto.Hash(0) as the value for opts. +func (priv PrivateKey) Sign(rand io.Reader, message []byte, opts crypto.SignerOpts) (signature []byte, err error) { + if opts.HashFunc() != crypto.Hash(0) { + return nil, errors.New("ed25519: cannot sign hashed message") + } + + return Sign(priv, message), nil +} + +// GenerateKey generates a public/private key pair using entropy from rand. +// If rand is nil, crypto/rand.Reader will be used. +func GenerateKey(rand io.Reader) (PublicKey, PrivateKey, error) { + if rand == nil { + rand = cryptorand.Reader + } + + seed := make([]byte, SeedSize) + if _, err := io.ReadFull(rand, seed); err != nil { + return nil, nil, err + } + + privateKey := NewKeyFromSeed(seed) + publicKey := make([]byte, PublicKeySize) + copy(publicKey, privateKey[32:]) + + return publicKey, privateKey, nil +} + +// NewKeyFromSeed calculates a private key from a seed. It will panic if +// len(seed) is not SeedSize. This function is provided for interoperability +// with RFC 8032. RFC 8032's private keys correspond to seeds in this +// package. +func NewKeyFromSeed(seed []byte) PrivateKey { + if l := len(seed); l != SeedSize { + panic("ed25519: bad seed length: " + strconv.Itoa(l)) + } + + digest := sha512.Sum512(seed) + digest[0] &= 248 + digest[31] &= 127 + digest[31] |= 64 + + var A edwards25519.ExtendedGroupElement + var hBytes [32]byte + copy(hBytes[:], digest[:]) + edwards25519.GeScalarMultBase(&A, &hBytes) + var publicKeyBytes [32]byte + A.ToBytes(&publicKeyBytes) + + privateKey := make([]byte, PrivateKeySize) + copy(privateKey, seed) + copy(privateKey[32:], publicKeyBytes[:]) + + return privateKey +} + +// Sign signs the message with privateKey and returns a signature. It will +// panic if len(privateKey) is not PrivateKeySize. +func Sign(privateKey PrivateKey, message []byte) []byte { + if l := len(privateKey); l != PrivateKeySize { + panic("ed25519: bad private key length: " + strconv.Itoa(l)) + } + + h := sha512.New() + h.Write(privateKey[:32]) + + var digest1, messageDigest, hramDigest [64]byte + var expandedSecretKey [32]byte + h.Sum(digest1[:0]) + copy(expandedSecretKey[:], digest1[:]) + expandedSecretKey[0] &= 248 + expandedSecretKey[31] &= 63 + expandedSecretKey[31] |= 64 + + h.Reset() + h.Write(digest1[32:]) + h.Write(message) + h.Sum(messageDigest[:0]) + + var messageDigestReduced [32]byte + edwards25519.ScReduce(&messageDigestReduced, &messageDigest) + var R edwards25519.ExtendedGroupElement + edwards25519.GeScalarMultBase(&R, &messageDigestReduced) + + var encodedR [32]byte + R.ToBytes(&encodedR) + + h.Reset() + h.Write(encodedR[:]) + h.Write(privateKey[32:]) + h.Write(message) + h.Sum(hramDigest[:0]) + var hramDigestReduced [32]byte + edwards25519.ScReduce(&hramDigestReduced, &hramDigest) + + var s [32]byte + edwards25519.ScMulAdd(&s, &hramDigestReduced, &expandedSecretKey, &messageDigestReduced) + + signature := make([]byte, SignatureSize) + copy(signature[:], encodedR[:]) + copy(signature[32:], s[:]) + + return signature +} + +// Verify reports whether sig is a valid signature of message by publicKey. It +// will panic if len(publicKey) is not PublicKeySize. +func Verify(publicKey PublicKey, message, sig []byte) bool { + if l := len(publicKey); l != PublicKeySize { + panic("ed25519: bad public key length: " + strconv.Itoa(l)) + } + + if len(sig) != SignatureSize || sig[63]&224 != 0 { + return false + } + + var A edwards25519.ExtendedGroupElement + var publicKeyBytes [32]byte + copy(publicKeyBytes[:], publicKey) + if !A.FromBytes(&publicKeyBytes) { + return false + } + edwards25519.FeNeg(&A.X, &A.X) + edwards25519.FeNeg(&A.T, &A.T) + + h := sha512.New() + h.Write(sig[:32]) + h.Write(publicKey[:]) + h.Write(message) + var digest [64]byte + h.Sum(digest[:0]) + + var hReduced [32]byte + edwards25519.ScReduce(&hReduced, &digest) + + var R edwards25519.ProjectiveGroupElement + var s [32]byte + copy(s[:], sig[32:]) + + // https://tools.ietf.org/html/rfc8032#section-5.1.7 requires that s be in + // the range [0, order) in order to prevent signature malleability. + if !edwards25519.ScMinimal(&s) { + return false + } + + edwards25519.GeDoubleScalarMultVartime(&R, &hReduced, &A, &s) + + var checkR [32]byte + R.ToBytes(&checkR) + return bytes.Equal(sig[:32], checkR[:]) +} diff --git a/vendor/golang.org/x/crypto/ed25519/ed25519_go113.go b/vendor/golang.org/x/crypto/ed25519/ed25519_go113.go new file mode 100644 index 0000000..d1448d8 --- /dev/null +++ b/vendor/golang.org/x/crypto/ed25519/ed25519_go113.go @@ -0,0 +1,73 @@ +// Copyright 2019 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build go1.13 + +// Package ed25519 implements the Ed25519 signature algorithm. See +// https://ed25519.cr.yp.to/. +// +// These functions are also compatible with the “Ed25519” function defined in +// RFC 8032. However, unlike RFC 8032's formulation, this package's private key +// representation includes a public key suffix to make multiple signing +// operations with the same key more efficient. This package refers to the RFC +// 8032 private key as the “seed”. +// +// Beginning with Go 1.13, the functionality of this package was moved to the +// standard library as crypto/ed25519. This package only acts as a compatibility +// wrapper. +package ed25519 + +import ( + "crypto/ed25519" + "io" +) + +const ( + // PublicKeySize is the size, in bytes, of public keys as used in this package. + PublicKeySize = 32 + // PrivateKeySize is the size, in bytes, of private keys as used in this package. + PrivateKeySize = 64 + // SignatureSize is the size, in bytes, of signatures generated and verified by this package. + SignatureSize = 64 + // SeedSize is the size, in bytes, of private key seeds. These are the private key representations used by RFC 8032. + SeedSize = 32 +) + +// PublicKey is the type of Ed25519 public keys. +// +// This type is an alias for crypto/ed25519's PublicKey type. +// See the crypto/ed25519 package for the methods on this type. +type PublicKey = ed25519.PublicKey + +// PrivateKey is the type of Ed25519 private keys. It implements crypto.Signer. +// +// This type is an alias for crypto/ed25519's PrivateKey type. +// See the crypto/ed25519 package for the methods on this type. +type PrivateKey = ed25519.PrivateKey + +// GenerateKey generates a public/private key pair using entropy from rand. +// If rand is nil, crypto/rand.Reader will be used. +func GenerateKey(rand io.Reader) (PublicKey, PrivateKey, error) { + return ed25519.GenerateKey(rand) +} + +// NewKeyFromSeed calculates a private key from a seed. It will panic if +// len(seed) is not SeedSize. This function is provided for interoperability +// with RFC 8032. RFC 8032's private keys correspond to seeds in this +// package. +func NewKeyFromSeed(seed []byte) PrivateKey { + return ed25519.NewKeyFromSeed(seed) +} + +// Sign signs the message with privateKey and returns a signature. It will +// panic if len(privateKey) is not PrivateKeySize. +func Sign(privateKey PrivateKey, message []byte) []byte { + return ed25519.Sign(privateKey, message) +} + +// Verify reports whether sig is a valid signature of message by publicKey. It +// will panic if len(publicKey) is not PublicKeySize. +func Verify(publicKey PublicKey, message, sig []byte) bool { + return ed25519.Verify(publicKey, message, sig) +} diff --git a/vendor/golang.org/x/crypto/ed25519/internal/edwards25519/const.go b/vendor/golang.org/x/crypto/ed25519/internal/edwards25519/const.go new file mode 100644 index 0000000..e39f086 --- /dev/null +++ b/vendor/golang.org/x/crypto/ed25519/internal/edwards25519/const.go @@ -0,0 +1,1422 @@ +// Copyright 2016 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package edwards25519 + +// These values are from the public domain, “ref10” implementation of ed25519 +// from SUPERCOP. + +// d is a constant in the Edwards curve equation. +var d = FieldElement{ + -10913610, 13857413, -15372611, 6949391, 114729, -8787816, -6275908, -3247719, -18696448, -12055116, +} + +// d2 is 2*d. +var d2 = FieldElement{ + -21827239, -5839606, -30745221, 13898782, 229458, 15978800, -12551817, -6495438, 29715968, 9444199, +} + +// SqrtM1 is the square-root of -1 in the field. +var SqrtM1 = FieldElement{ + -32595792, -7943725, 9377950, 3500415, 12389472, -272473, -25146209, -2005654, 326686, 11406482, +} + +// A is a constant in the Montgomery-form of curve25519. +var A = FieldElement{ + 486662, 0, 0, 0, 0, 0, 0, 0, 0, 0, +} + +// bi contains precomputed multiples of the base-point. See the Ed25519 paper +// for a discussion about how these values are used. +var bi = [8]PreComputedGroupElement{ + { + FieldElement{25967493, -14356035, 29566456, 3660896, -12694345, 4014787, 27544626, -11754271, -6079156, 2047605}, + FieldElement{-12545711, 934262, -2722910, 3049990, -727428, 9406986, 12720692, 5043384, 19500929, -15469378}, + FieldElement{-8738181, 4489570, 9688441, -14785194, 10184609, -12363380, 29287919, 11864899, -24514362, -4438546}, + }, + { + FieldElement{15636291, -9688557, 24204773, -7912398, 616977, -16685262, 27787600, -14772189, 28944400, -1550024}, + FieldElement{16568933, 4717097, -11556148, -1102322, 15682896, -11807043, 16354577, -11775962, 7689662, 11199574}, + FieldElement{30464156, -5976125, -11779434, -15670865, 23220365, 15915852, 7512774, 10017326, -17749093, -9920357}, + }, + { + FieldElement{10861363, 11473154, 27284546, 1981175, -30064349, 12577861, 32867885, 14515107, -15438304, 10819380}, + FieldElement{4708026, 6336745, 20377586, 9066809, -11272109, 6594696, -25653668, 12483688, -12668491, 5581306}, + FieldElement{19563160, 16186464, -29386857, 4097519, 10237984, -4348115, 28542350, 13850243, -23678021, -15815942}, + }, + { + FieldElement{5153746, 9909285, 1723747, -2777874, 30523605, 5516873, 19480852, 5230134, -23952439, -15175766}, + FieldElement{-30269007, -3463509, 7665486, 10083793, 28475525, 1649722, 20654025, 16520125, 30598449, 7715701}, + FieldElement{28881845, 14381568, 9657904, 3680757, -20181635, 7843316, -31400660, 1370708, 29794553, -1409300}, + }, + { + FieldElement{-22518993, -6692182, 14201702, -8745502, -23510406, 8844726, 18474211, -1361450, -13062696, 13821877}, + FieldElement{-6455177, -7839871, 3374702, -4740862, -27098617, -10571707, 31655028, -7212327, 18853322, -14220951}, + FieldElement{4566830, -12963868, -28974889, -12240689, -7602672, -2830569, -8514358, -10431137, 2207753, -3209784}, + }, + { + FieldElement{-25154831, -4185821, 29681144, 7868801, -6854661, -9423865, -12437364, -663000, -31111463, -16132436}, + FieldElement{25576264, -2703214, 7349804, -11814844, 16472782, 9300885, 3844789, 15725684, 171356, 6466918}, + FieldElement{23103977, 13316479, 9739013, -16149481, 817875, -15038942, 8965339, -14088058, -30714912, 16193877}, + }, + { + FieldElement{-33521811, 3180713, -2394130, 14003687, -16903474, -16270840, 17238398, 4729455, -18074513, 9256800}, + FieldElement{-25182317, -4174131, 32336398, 5036987, -21236817, 11360617, 22616405, 9761698, -19827198, 630305}, + FieldElement{-13720693, 2639453, -24237460, -7406481, 9494427, -5774029, -6554551, -15960994, -2449256, -14291300}, + }, + { + FieldElement{-3151181, -5046075, 9282714, 6866145, -31907062, -863023, -18940575, 15033784, 25105118, -7894876}, + FieldElement{-24326370, 15950226, -31801215, -14592823, -11662737, -5090925, 1573892, -2625887, 2198790, -15804619}, + FieldElement{-3099351, 10324967, -2241613, 7453183, -5446979, -2735503, -13812022, -16236442, -32461234, -12290683}, + }, +} + +// base contains precomputed multiples of the base-point. See the Ed25519 paper +// for a discussion about how these values are used. +var base = [32][8]PreComputedGroupElement{ + { + { + FieldElement{25967493, -14356035, 29566456, 3660896, -12694345, 4014787, 27544626, -11754271, -6079156, 2047605}, + FieldElement{-12545711, 934262, -2722910, 3049990, -727428, 9406986, 12720692, 5043384, 19500929, -15469378}, + FieldElement{-8738181, 4489570, 9688441, -14785194, 10184609, -12363380, 29287919, 11864899, -24514362, -4438546}, + }, + { + FieldElement{-12815894, -12976347, -21581243, 11784320, -25355658, -2750717, -11717903, -3814571, -358445, -10211303}, + FieldElement{-21703237, 6903825, 27185491, 6451973, -29577724, -9554005, -15616551, 11189268, -26829678, -5319081}, + FieldElement{26966642, 11152617, 32442495, 15396054, 14353839, -12752335, -3128826, -9541118, -15472047, -4166697}, + }, + { + FieldElement{15636291, -9688557, 24204773, -7912398, 616977, -16685262, 27787600, -14772189, 28944400, -1550024}, + FieldElement{16568933, 4717097, -11556148, -1102322, 15682896, -11807043, 16354577, -11775962, 7689662, 11199574}, + FieldElement{30464156, -5976125, -11779434, -15670865, 23220365, 15915852, 7512774, 10017326, -17749093, -9920357}, + }, + { + FieldElement{-17036878, 13921892, 10945806, -6033431, 27105052, -16084379, -28926210, 15006023, 3284568, -6276540}, + FieldElement{23599295, -8306047, -11193664, -7687416, 13236774, 10506355, 7464579, 9656445, 13059162, 10374397}, + FieldElement{7798556, 16710257, 3033922, 2874086, 28997861, 2835604, 32406664, -3839045, -641708, -101325}, + }, + { + FieldElement{10861363, 11473154, 27284546, 1981175, -30064349, 12577861, 32867885, 14515107, -15438304, 10819380}, + FieldElement{4708026, 6336745, 20377586, 9066809, -11272109, 6594696, -25653668, 12483688, -12668491, 5581306}, + FieldElement{19563160, 16186464, -29386857, 4097519, 10237984, -4348115, 28542350, 13850243, -23678021, -15815942}, + }, + { + FieldElement{-15371964, -12862754, 32573250, 4720197, -26436522, 5875511, -19188627, -15224819, -9818940, -12085777}, + FieldElement{-8549212, 109983, 15149363, 2178705, 22900618, 4543417, 3044240, -15689887, 1762328, 14866737}, + FieldElement{-18199695, -15951423, -10473290, 1707278, -17185920, 3916101, -28236412, 3959421, 27914454, 4383652}, + }, + { + FieldElement{5153746, 9909285, 1723747, -2777874, 30523605, 5516873, 19480852, 5230134, -23952439, -15175766}, + FieldElement{-30269007, -3463509, 7665486, 10083793, 28475525, 1649722, 20654025, 16520125, 30598449, 7715701}, + FieldElement{28881845, 14381568, 9657904, 3680757, -20181635, 7843316, -31400660, 1370708, 29794553, -1409300}, + }, + { + FieldElement{14499471, -2729599, -33191113, -4254652, 28494862, 14271267, 30290735, 10876454, -33154098, 2381726}, + FieldElement{-7195431, -2655363, -14730155, 462251, -27724326, 3941372, -6236617, 3696005, -32300832, 15351955}, + FieldElement{27431194, 8222322, 16448760, -3907995, -18707002, 11938355, -32961401, -2970515, 29551813, 10109425}, + }, + }, + { + { + FieldElement{-13657040, -13155431, -31283750, 11777098, 21447386, 6519384, -2378284, -1627556, 10092783, -4764171}, + FieldElement{27939166, 14210322, 4677035, 16277044, -22964462, -12398139, -32508754, 12005538, -17810127, 12803510}, + FieldElement{17228999, -15661624, -1233527, 300140, -1224870, -11714777, 30364213, -9038194, 18016357, 4397660}, + }, + { + FieldElement{-10958843, -7690207, 4776341, -14954238, 27850028, -15602212, -26619106, 14544525, -17477504, 982639}, + FieldElement{29253598, 15796703, -2863982, -9908884, 10057023, 3163536, 7332899, -4120128, -21047696, 9934963}, + FieldElement{5793303, 16271923, -24131614, -10116404, 29188560, 1206517, -14747930, 4559895, -30123922, -10897950}, + }, + { + FieldElement{-27643952, -11493006, 16282657, -11036493, 28414021, -15012264, 24191034, 4541697, -13338309, 5500568}, + FieldElement{12650548, -1497113, 9052871, 11355358, -17680037, -8400164, -17430592, 12264343, 10874051, 13524335}, + FieldElement{25556948, -3045990, 714651, 2510400, 23394682, -10415330, 33119038, 5080568, -22528059, 5376628}, + }, + { + FieldElement{-26088264, -4011052, -17013699, -3537628, -6726793, 1920897, -22321305, -9447443, 4535768, 1569007}, + FieldElement{-2255422, 14606630, -21692440, -8039818, 28430649, 8775819, -30494562, 3044290, 31848280, 12543772}, + FieldElement{-22028579, 2943893, -31857513, 6777306, 13784462, -4292203, -27377195, -2062731, 7718482, 14474653}, + }, + { + FieldElement{2385315, 2454213, -22631320, 46603, -4437935, -15680415, 656965, -7236665, 24316168, -5253567}, + FieldElement{13741529, 10911568, -33233417, -8603737, -20177830, -1033297, 33040651, -13424532, -20729456, 8321686}, + FieldElement{21060490, -2212744, 15712757, -4336099, 1639040, 10656336, 23845965, -11874838, -9984458, 608372}, + }, + { + FieldElement{-13672732, -15087586, -10889693, -7557059, -6036909, 11305547, 1123968, -6780577, 27229399, 23887}, + FieldElement{-23244140, -294205, -11744728, 14712571, -29465699, -2029617, 12797024, -6440308, -1633405, 16678954}, + FieldElement{-29500620, 4770662, -16054387, 14001338, 7830047, 9564805, -1508144, -4795045, -17169265, 4904953}, + }, + { + FieldElement{24059557, 14617003, 19037157, -15039908, 19766093, -14906429, 5169211, 16191880, 2128236, -4326833}, + FieldElement{-16981152, 4124966, -8540610, -10653797, 30336522, -14105247, -29806336, 916033, -6882542, -2986532}, + FieldElement{-22630907, 12419372, -7134229, -7473371, -16478904, 16739175, 285431, 2763829, 15736322, 4143876}, + }, + { + FieldElement{2379352, 11839345, -4110402, -5988665, 11274298, 794957, 212801, -14594663, 23527084, -16458268}, + FieldElement{33431127, -11130478, -17838966, -15626900, 8909499, 8376530, -32625340, 4087881, -15188911, -14416214}, + FieldElement{1767683, 7197987, -13205226, -2022635, -13091350, 448826, 5799055, 4357868, -4774191, -16323038}, + }, + }, + { + { + FieldElement{6721966, 13833823, -23523388, -1551314, 26354293, -11863321, 23365147, -3949732, 7390890, 2759800}, + FieldElement{4409041, 2052381, 23373853, 10530217, 7676779, -12885954, 21302353, -4264057, 1244380, -12919645}, + FieldElement{-4421239, 7169619, 4982368, -2957590, 30256825, -2777540, 14086413, 9208236, 15886429, 16489664}, + }, + { + FieldElement{1996075, 10375649, 14346367, 13311202, -6874135, -16438411, -13693198, 398369, -30606455, -712933}, + FieldElement{-25307465, 9795880, -2777414, 14878809, -33531835, 14780363, 13348553, 12076947, -30836462, 5113182}, + FieldElement{-17770784, 11797796, 31950843, 13929123, -25888302, 12288344, -30341101, -7336386, 13847711, 5387222}, + }, + { + FieldElement{-18582163, -3416217, 17824843, -2340966, 22744343, -10442611, 8763061, 3617786, -19600662, 10370991}, + FieldElement{20246567, -14369378, 22358229, -543712, 18507283, -10413996, 14554437, -8746092, 32232924, 16763880}, + FieldElement{9648505, 10094563, 26416693, 14745928, -30374318, -6472621, 11094161, 15689506, 3140038, -16510092}, + }, + { + FieldElement{-16160072, 5472695, 31895588, 4744994, 8823515, 10365685, -27224800, 9448613, -28774454, 366295}, + FieldElement{19153450, 11523972, -11096490, -6503142, -24647631, 5420647, 28344573, 8041113, 719605, 11671788}, + FieldElement{8678025, 2694440, -6808014, 2517372, 4964326, 11152271, -15432916, -15266516, 27000813, -10195553}, + }, + { + FieldElement{-15157904, 7134312, 8639287, -2814877, -7235688, 10421742, 564065, 5336097, 6750977, -14521026}, + FieldElement{11836410, -3979488, 26297894, 16080799, 23455045, 15735944, 1695823, -8819122, 8169720, 16220347}, + FieldElement{-18115838, 8653647, 17578566, -6092619, -8025777, -16012763, -11144307, -2627664, -5990708, -14166033}, + }, + { + FieldElement{-23308498, -10968312, 15213228, -10081214, -30853605, -11050004, 27884329, 2847284, 2655861, 1738395}, + FieldElement{-27537433, -14253021, -25336301, -8002780, -9370762, 8129821, 21651608, -3239336, -19087449, -11005278}, + FieldElement{1533110, 3437855, 23735889, 459276, 29970501, 11335377, 26030092, 5821408, 10478196, 8544890}, + }, + { + FieldElement{32173121, -16129311, 24896207, 3921497, 22579056, -3410854, 19270449, 12217473, 17789017, -3395995}, + FieldElement{-30552961, -2228401, -15578829, -10147201, 13243889, 517024, 15479401, -3853233, 30460520, 1052596}, + FieldElement{-11614875, 13323618, 32618793, 8175907, -15230173, 12596687, 27491595, -4612359, 3179268, -9478891}, + }, + { + FieldElement{31947069, -14366651, -4640583, -15339921, -15125977, -6039709, -14756777, -16411740, 19072640, -9511060}, + FieldElement{11685058, 11822410, 3158003, -13952594, 33402194, -4165066, 5977896, -5215017, 473099, 5040608}, + FieldElement{-20290863, 8198642, -27410132, 11602123, 1290375, -2799760, 28326862, 1721092, -19558642, -3131606}, + }, + }, + { + { + FieldElement{7881532, 10687937, 7578723, 7738378, -18951012, -2553952, 21820786, 8076149, -27868496, 11538389}, + FieldElement{-19935666, 3899861, 18283497, -6801568, -15728660, -11249211, 8754525, 7446702, -5676054, 5797016}, + FieldElement{-11295600, -3793569, -15782110, -7964573, 12708869, -8456199, 2014099, -9050574, -2369172, -5877341}, + }, + { + FieldElement{-22472376, -11568741, -27682020, 1146375, 18956691, 16640559, 1192730, -3714199, 15123619, 10811505}, + FieldElement{14352098, -3419715, -18942044, 10822655, 32750596, 4699007, -70363, 15776356, -28886779, -11974553}, + FieldElement{-28241164, -8072475, -4978962, -5315317, 29416931, 1847569, -20654173, -16484855, 4714547, -9600655}, + }, + { + FieldElement{15200332, 8368572, 19679101, 15970074, -31872674, 1959451, 24611599, -4543832, -11745876, 12340220}, + FieldElement{12876937, -10480056, 33134381, 6590940, -6307776, 14872440, 9613953, 8241152, 15370987, 9608631}, + FieldElement{-4143277, -12014408, 8446281, -391603, 4407738, 13629032, -7724868, 15866074, -28210621, -8814099}, + }, + { + FieldElement{26660628, -15677655, 8393734, 358047, -7401291, 992988, -23904233, 858697, 20571223, 8420556}, + FieldElement{14620715, 13067227, -15447274, 8264467, 14106269, 15080814, 33531827, 12516406, -21574435, -12476749}, + FieldElement{236881, 10476226, 57258, -14677024, 6472998, 2466984, 17258519, 7256740, 8791136, 15069930}, + }, + { + FieldElement{1276410, -9371918, 22949635, -16322807, -23493039, -5702186, 14711875, 4874229, -30663140, -2331391}, + FieldElement{5855666, 4990204, -13711848, 7294284, -7804282, 1924647, -1423175, -7912378, -33069337, 9234253}, + FieldElement{20590503, -9018988, 31529744, -7352666, -2706834, 10650548, 31559055, -11609587, 18979186, 13396066}, + }, + { + FieldElement{24474287, 4968103, 22267082, 4407354, 24063882, -8325180, -18816887, 13594782, 33514650, 7021958}, + FieldElement{-11566906, -6565505, -21365085, 15928892, -26158305, 4315421, -25948728, -3916677, -21480480, 12868082}, + FieldElement{-28635013, 13504661, 19988037, -2132761, 21078225, 6443208, -21446107, 2244500, -12455797, -8089383}, + }, + { + FieldElement{-30595528, 13793479, -5852820, 319136, -25723172, -6263899, 33086546, 8957937, -15233648, 5540521}, + FieldElement{-11630176, -11503902, -8119500, -7643073, 2620056, 1022908, -23710744, -1568984, -16128528, -14962807}, + FieldElement{23152971, 775386, 27395463, 14006635, -9701118, 4649512, 1689819, 892185, -11513277, -15205948}, + }, + { + FieldElement{9770129, 9586738, 26496094, 4324120, 1556511, -3550024, 27453819, 4763127, -19179614, 5867134}, + FieldElement{-32765025, 1927590, 31726409, -4753295, 23962434, -16019500, 27846559, 5931263, -29749703, -16108455}, + FieldElement{27461885, -2977536, 22380810, 1815854, -23033753, -3031938, 7283490, -15148073, -19526700, 7734629}, + }, + }, + { + { + FieldElement{-8010264, -9590817, -11120403, 6196038, 29344158, -13430885, 7585295, -3176626, 18549497, 15302069}, + FieldElement{-32658337, -6171222, -7672793, -11051681, 6258878, 13504381, 10458790, -6418461, -8872242, 8424746}, + FieldElement{24687205, 8613276, -30667046, -3233545, 1863892, -1830544, 19206234, 7134917, -11284482, -828919}, + }, + { + FieldElement{11334899, -9218022, 8025293, 12707519, 17523892, -10476071, 10243738, -14685461, -5066034, 16498837}, + FieldElement{8911542, 6887158, -9584260, -6958590, 11145641, -9543680, 17303925, -14124238, 6536641, 10543906}, + FieldElement{-28946384, 15479763, -17466835, 568876, -1497683, 11223454, -2669190, -16625574, -27235709, 8876771}, + }, + { + FieldElement{-25742899, -12566864, -15649966, -846607, -33026686, -796288, -33481822, 15824474, -604426, -9039817}, + FieldElement{10330056, 70051, 7957388, -9002667, 9764902, 15609756, 27698697, -4890037, 1657394, 3084098}, + FieldElement{10477963, -7470260, 12119566, -13250805, 29016247, -5365589, 31280319, 14396151, -30233575, 15272409}, + }, + { + FieldElement{-12288309, 3169463, 28813183, 16658753, 25116432, -5630466, -25173957, -12636138, -25014757, 1950504}, + FieldElement{-26180358, 9489187, 11053416, -14746161, -31053720, 5825630, -8384306, -8767532, 15341279, 8373727}, + FieldElement{28685821, 7759505, -14378516, -12002860, -31971820, 4079242, 298136, -10232602, -2878207, 15190420}, + }, + { + FieldElement{-32932876, 13806336, -14337485, -15794431, -24004620, 10940928, 8669718, 2742393, -26033313, -6875003}, + FieldElement{-1580388, -11729417, -25979658, -11445023, -17411874, -10912854, 9291594, -16247779, -12154742, 6048605}, + FieldElement{-30305315, 14843444, 1539301, 11864366, 20201677, 1900163, 13934231, 5128323, 11213262, 9168384}, + }, + { + FieldElement{-26280513, 11007847, 19408960, -940758, -18592965, -4328580, -5088060, -11105150, 20470157, -16398701}, + FieldElement{-23136053, 9282192, 14855179, -15390078, -7362815, -14408560, -22783952, 14461608, 14042978, 5230683}, + FieldElement{29969567, -2741594, -16711867, -8552442, 9175486, -2468974, 21556951, 3506042, -5933891, -12449708}, + }, + { + FieldElement{-3144746, 8744661, 19704003, 4581278, -20430686, 6830683, -21284170, 8971513, -28539189, 15326563}, + FieldElement{-19464629, 10110288, -17262528, -3503892, -23500387, 1355669, -15523050, 15300988, -20514118, 9168260}, + FieldElement{-5353335, 4488613, -23803248, 16314347, 7780487, -15638939, -28948358, 9601605, 33087103, -9011387}, + }, + { + FieldElement{-19443170, -15512900, -20797467, -12445323, -29824447, 10229461, -27444329, -15000531, -5996870, 15664672}, + FieldElement{23294591, -16632613, -22650781, -8470978, 27844204, 11461195, 13099750, -2460356, 18151676, 13417686}, + FieldElement{-24722913, -4176517, -31150679, 5988919, -26858785, 6685065, 1661597, -12551441, 15271676, -15452665}, + }, + }, + { + { + FieldElement{11433042, -13228665, 8239631, -5279517, -1985436, -725718, -18698764, 2167544, -6921301, -13440182}, + FieldElement{-31436171, 15575146, 30436815, 12192228, -22463353, 9395379, -9917708, -8638997, 12215110, 12028277}, + FieldElement{14098400, 6555944, 23007258, 5757252, -15427832, -12950502, 30123440, 4617780, -16900089, -655628}, + }, + { + FieldElement{-4026201, -15240835, 11893168, 13718664, -14809462, 1847385, -15819999, 10154009, 23973261, -12684474}, + FieldElement{-26531820, -3695990, -1908898, 2534301, -31870557, -16550355, 18341390, -11419951, 32013174, -10103539}, + FieldElement{-25479301, 10876443, -11771086, -14625140, -12369567, 1838104, 21911214, 6354752, 4425632, -837822}, + }, + { + FieldElement{-10433389, -14612966, 22229858, -3091047, -13191166, 776729, -17415375, -12020462, 4725005, 14044970}, + FieldElement{19268650, -7304421, 1555349, 8692754, -21474059, -9910664, 6347390, -1411784, -19522291, -16109756}, + FieldElement{-24864089, 12986008, -10898878, -5558584, -11312371, -148526, 19541418, 8180106, 9282262, 10282508}, + }, + { + FieldElement{-26205082, 4428547, -8661196, -13194263, 4098402, -14165257, 15522535, 8372215, 5542595, -10702683}, + FieldElement{-10562541, 14895633, 26814552, -16673850, -17480754, -2489360, -2781891, 6993761, -18093885, 10114655}, + FieldElement{-20107055, -929418, 31422704, 10427861, -7110749, 6150669, -29091755, -11529146, 25953725, -106158}, + }, + { + FieldElement{-4234397, -8039292, -9119125, 3046000, 2101609, -12607294, 19390020, 6094296, -3315279, 12831125}, + FieldElement{-15998678, 7578152, 5310217, 14408357, -33548620, -224739, 31575954, 6326196, 7381791, -2421839}, + FieldElement{-20902779, 3296811, 24736065, -16328389, 18374254, 7318640, 6295303, 8082724, -15362489, 12339664}, + }, + { + FieldElement{27724736, 2291157, 6088201, -14184798, 1792727, 5857634, 13848414, 15768922, 25091167, 14856294}, + FieldElement{-18866652, 8331043, 24373479, 8541013, -701998, -9269457, 12927300, -12695493, -22182473, -9012899}, + FieldElement{-11423429, -5421590, 11632845, 3405020, 30536730, -11674039, -27260765, 13866390, 30146206, 9142070}, + }, + { + FieldElement{3924129, -15307516, -13817122, -10054960, 12291820, -668366, -27702774, 9326384, -8237858, 4171294}, + FieldElement{-15921940, 16037937, 6713787, 16606682, -21612135, 2790944, 26396185, 3731949, 345228, -5462949}, + FieldElement{-21327538, 13448259, 25284571, 1143661, 20614966, -8849387, 2031539, -12391231, -16253183, -13582083}, + }, + { + FieldElement{31016211, -16722429, 26371392, -14451233, -5027349, 14854137, 17477601, 3842657, 28012650, -16405420}, + FieldElement{-5075835, 9368966, -8562079, -4600902, -15249953, 6970560, -9189873, 16292057, -8867157, 3507940}, + FieldElement{29439664, 3537914, 23333589, 6997794, -17555561, -11018068, -15209202, -15051267, -9164929, 6580396}, + }, + }, + { + { + FieldElement{-12185861, -7679788, 16438269, 10826160, -8696817, -6235611, 17860444, -9273846, -2095802, 9304567}, + FieldElement{20714564, -4336911, 29088195, 7406487, 11426967, -5095705, 14792667, -14608617, 5289421, -477127}, + FieldElement{-16665533, -10650790, -6160345, -13305760, 9192020, -1802462, 17271490, 12349094, 26939669, -3752294}, + }, + { + FieldElement{-12889898, 9373458, 31595848, 16374215, 21471720, 13221525, -27283495, -12348559, -3698806, 117887}, + FieldElement{22263325, -6560050, 3984570, -11174646, -15114008, -566785, 28311253, 5358056, -23319780, 541964}, + FieldElement{16259219, 3261970, 2309254, -15534474, -16885711, -4581916, 24134070, -16705829, -13337066, -13552195}, + }, + { + FieldElement{9378160, -13140186, -22845982, -12745264, 28198281, -7244098, -2399684, -717351, 690426, 14876244}, + FieldElement{24977353, -314384, -8223969, -13465086, 28432343, -1176353, -13068804, -12297348, -22380984, 6618999}, + FieldElement{-1538174, 11685646, 12944378, 13682314, -24389511, -14413193, 8044829, -13817328, 32239829, -5652762}, + }, + { + FieldElement{-18603066, 4762990, -926250, 8885304, -28412480, -3187315, 9781647, -10350059, 32779359, 5095274}, + FieldElement{-33008130, -5214506, -32264887, -3685216, 9460461, -9327423, -24601656, 14506724, 21639561, -2630236}, + FieldElement{-16400943, -13112215, 25239338, 15531969, 3987758, -4499318, -1289502, -6863535, 17874574, 558605}, + }, + { + FieldElement{-13600129, 10240081, 9171883, 16131053, -20869254, 9599700, 33499487, 5080151, 2085892, 5119761}, + FieldElement{-22205145, -2519528, -16381601, 414691, -25019550, 2170430, 30634760, -8363614, -31999993, -5759884}, + FieldElement{-6845704, 15791202, 8550074, -1312654, 29928809, -12092256, 27534430, -7192145, -22351378, 12961482}, + }, + { + FieldElement{-24492060, -9570771, 10368194, 11582341, -23397293, -2245287, 16533930, 8206996, -30194652, -5159638}, + FieldElement{-11121496, -3382234, 2307366, 6362031, -135455, 8868177, -16835630, 7031275, 7589640, 8945490}, + FieldElement{-32152748, 8917967, 6661220, -11677616, -1192060, -15793393, 7251489, -11182180, 24099109, -14456170}, + }, + { + FieldElement{5019558, -7907470, 4244127, -14714356, -26933272, 6453165, -19118182, -13289025, -6231896, -10280736}, + FieldElement{10853594, 10721687, 26480089, 5861829, -22995819, 1972175, -1866647, -10557898, -3363451, -6441124}, + FieldElement{-17002408, 5906790, 221599, -6563147, 7828208, -13248918, 24362661, -2008168, -13866408, 7421392}, + }, + { + FieldElement{8139927, -6546497, 32257646, -5890546, 30375719, 1886181, -21175108, 15441252, 28826358, -4123029}, + FieldElement{6267086, 9695052, 7709135, -16603597, -32869068, -1886135, 14795160, -7840124, 13746021, -1742048}, + FieldElement{28584902, 7787108, -6732942, -15050729, 22846041, -7571236, -3181936, -363524, 4771362, -8419958}, + }, + }, + { + { + FieldElement{24949256, 6376279, -27466481, -8174608, -18646154, -9930606, 33543569, -12141695, 3569627, 11342593}, + FieldElement{26514989, 4740088, 27912651, 3697550, 19331575, -11472339, 6809886, 4608608, 7325975, -14801071}, + FieldElement{-11618399, -14554430, -24321212, 7655128, -1369274, 5214312, -27400540, 10258390, -17646694, -8186692}, + }, + { + FieldElement{11431204, 15823007, 26570245, 14329124, 18029990, 4796082, -31446179, 15580664, 9280358, -3973687}, + FieldElement{-160783, -10326257, -22855316, -4304997, -20861367, -13621002, -32810901, -11181622, -15545091, 4387441}, + FieldElement{-20799378, 12194512, 3937617, -5805892, -27154820, 9340370, -24513992, 8548137, 20617071, -7482001}, + }, + { + FieldElement{-938825, -3930586, -8714311, 16124718, 24603125, -6225393, -13775352, -11875822, 24345683, 10325460}, + FieldElement{-19855277, -1568885, -22202708, 8714034, 14007766, 6928528, 16318175, -1010689, 4766743, 3552007}, + FieldElement{-21751364, -16730916, 1351763, -803421, -4009670, 3950935, 3217514, 14481909, 10988822, -3994762}, + }, + { + FieldElement{15564307, -14311570, 3101243, 5684148, 30446780, -8051356, 12677127, -6505343, -8295852, 13296005}, + FieldElement{-9442290, 6624296, -30298964, -11913677, -4670981, -2057379, 31521204, 9614054, -30000824, 12074674}, + FieldElement{4771191, -135239, 14290749, -13089852, 27992298, 14998318, -1413936, -1556716, 29832613, -16391035}, + }, + { + FieldElement{7064884, -7541174, -19161962, -5067537, -18891269, -2912736, 25825242, 5293297, -27122660, 13101590}, + FieldElement{-2298563, 2439670, -7466610, 1719965, -27267541, -16328445, 32512469, -5317593, -30356070, -4190957}, + FieldElement{-30006540, 10162316, -33180176, 3981723, -16482138, -13070044, 14413974, 9515896, 19568978, 9628812}, + }, + { + FieldElement{33053803, 199357, 15894591, 1583059, 27380243, -4580435, -17838894, -6106839, -6291786, 3437740}, + FieldElement{-18978877, 3884493, 19469877, 12726490, 15913552, 13614290, -22961733, 70104, 7463304, 4176122}, + FieldElement{-27124001, 10659917, 11482427, -16070381, 12771467, -6635117, -32719404, -5322751, 24216882, 5944158}, + }, + { + FieldElement{8894125, 7450974, -2664149, -9765752, -28080517, -12389115, 19345746, 14680796, 11632993, 5847885}, + FieldElement{26942781, -2315317, 9129564, -4906607, 26024105, 11769399, -11518837, 6367194, -9727230, 4782140}, + FieldElement{19916461, -4828410, -22910704, -11414391, 25606324, -5972441, 33253853, 8220911, 6358847, -1873857}, + }, + { + FieldElement{801428, -2081702, 16569428, 11065167, 29875704, 96627, 7908388, -4480480, -13538503, 1387155}, + FieldElement{19646058, 5720633, -11416706, 12814209, 11607948, 12749789, 14147075, 15156355, -21866831, 11835260}, + FieldElement{19299512, 1155910, 28703737, 14890794, 2925026, 7269399, 26121523, 15467869, -26560550, 5052483}, + }, + }, + { + { + FieldElement{-3017432, 10058206, 1980837, 3964243, 22160966, 12322533, -6431123, -12618185, 12228557, -7003677}, + FieldElement{32944382, 14922211, -22844894, 5188528, 21913450, -8719943, 4001465, 13238564, -6114803, 8653815}, + FieldElement{22865569, -4652735, 27603668, -12545395, 14348958, 8234005, 24808405, 5719875, 28483275, 2841751}, + }, + { + FieldElement{-16420968, -1113305, -327719, -12107856, 21886282, -15552774, -1887966, -315658, 19932058, -12739203}, + FieldElement{-11656086, 10087521, -8864888, -5536143, -19278573, -3055912, 3999228, 13239134, -4777469, -13910208}, + FieldElement{1382174, -11694719, 17266790, 9194690, -13324356, 9720081, 20403944, 11284705, -14013818, 3093230}, + }, + { + FieldElement{16650921, -11037932, -1064178, 1570629, -8329746, 7352753, -302424, 16271225, -24049421, -6691850}, + FieldElement{-21911077, -5927941, -4611316, -5560156, -31744103, -10785293, 24123614, 15193618, -21652117, -16739389}, + FieldElement{-9935934, -4289447, -25279823, 4372842, 2087473, 10399484, 31870908, 14690798, 17361620, 11864968}, + }, + { + FieldElement{-11307610, 6210372, 13206574, 5806320, -29017692, -13967200, -12331205, -7486601, -25578460, -16240689}, + FieldElement{14668462, -12270235, 26039039, 15305210, 25515617, 4542480, 10453892, 6577524, 9145645, -6443880}, + FieldElement{5974874, 3053895, -9433049, -10385191, -31865124, 3225009, -7972642, 3936128, -5652273, -3050304}, + }, + { + FieldElement{30625386, -4729400, -25555961, -12792866, -20484575, 7695099, 17097188, -16303496, -27999779, 1803632}, + FieldElement{-3553091, 9865099, -5228566, 4272701, -5673832, -16689700, 14911344, 12196514, -21405489, 7047412}, + FieldElement{20093277, 9920966, -11138194, -5343857, 13161587, 12044805, -32856851, 4124601, -32343828, -10257566}, + }, + { + FieldElement{-20788824, 14084654, -13531713, 7842147, 19119038, -13822605, 4752377, -8714640, -21679658, 2288038}, + FieldElement{-26819236, -3283715, 29965059, 3039786, -14473765, 2540457, 29457502, 14625692, -24819617, 12570232}, + FieldElement{-1063558, -11551823, 16920318, 12494842, 1278292, -5869109, -21159943, -3498680, -11974704, 4724943}, + }, + { + FieldElement{17960970, -11775534, -4140968, -9702530, -8876562, -1410617, -12907383, -8659932, -29576300, 1903856}, + FieldElement{23134274, -14279132, -10681997, -1611936, 20684485, 15770816, -12989750, 3190296, 26955097, 14109738}, + FieldElement{15308788, 5320727, -30113809, -14318877, 22902008, 7767164, 29425325, -11277562, 31960942, 11934971}, + }, + { + FieldElement{-27395711, 8435796, 4109644, 12222639, -24627868, 14818669, 20638173, 4875028, 10491392, 1379718}, + FieldElement{-13159415, 9197841, 3875503, -8936108, -1383712, -5879801, 33518459, 16176658, 21432314, 12180697}, + FieldElement{-11787308, 11500838, 13787581, -13832590, -22430679, 10140205, 1465425, 12689540, -10301319, -13872883}, + }, + }, + { + { + FieldElement{5414091, -15386041, -21007664, 9643570, 12834970, 1186149, -2622916, -1342231, 26128231, 6032912}, + FieldElement{-26337395, -13766162, 32496025, -13653919, 17847801, -12669156, 3604025, 8316894, -25875034, -10437358}, + FieldElement{3296484, 6223048, 24680646, -12246460, -23052020, 5903205, -8862297, -4639164, 12376617, 3188849}, + }, + { + FieldElement{29190488, -14659046, 27549113, -1183516, 3520066, -10697301, 32049515, -7309113, -16109234, -9852307}, + FieldElement{-14744486, -9309156, 735818, -598978, -20407687, -5057904, 25246078, -15795669, 18640741, -960977}, + FieldElement{-6928835, -16430795, 10361374, 5642961, 4910474, 12345252, -31638386, -494430, 10530747, 1053335}, + }, + { + FieldElement{-29265967, -14186805, -13538216, -12117373, -19457059, -10655384, -31462369, -2948985, 24018831, 15026644}, + FieldElement{-22592535, -3145277, -2289276, 5953843, -13440189, 9425631, 25310643, 13003497, -2314791, -15145616}, + FieldElement{-27419985, -603321, -8043984, -1669117, -26092265, 13987819, -27297622, 187899, -23166419, -2531735}, + }, + { + FieldElement{-21744398, -13810475, 1844840, 5021428, -10434399, -15911473, 9716667, 16266922, -5070217, 726099}, + FieldElement{29370922, -6053998, 7334071, -15342259, 9385287, 2247707, -13661962, -4839461, 30007388, -15823341}, + FieldElement{-936379, 16086691, 23751945, -543318, -1167538, -5189036, 9137109, 730663, 9835848, 4555336}, + }, + { + FieldElement{-23376435, 1410446, -22253753, -12899614, 30867635, 15826977, 17693930, 544696, -11985298, 12422646}, + FieldElement{31117226, -12215734, -13502838, 6561947, -9876867, -12757670, -5118685, -4096706, 29120153, 13924425}, + FieldElement{-17400879, -14233209, 19675799, -2734756, -11006962, -5858820, -9383939, -11317700, 7240931, -237388}, + }, + { + FieldElement{-31361739, -11346780, -15007447, -5856218, -22453340, -12152771, 1222336, 4389483, 3293637, -15551743}, + FieldElement{-16684801, -14444245, 11038544, 11054958, -13801175, -3338533, -24319580, 7733547, 12796905, -6335822}, + FieldElement{-8759414, -10817836, -25418864, 10783769, -30615557, -9746811, -28253339, 3647836, 3222231, -11160462}, + }, + { + FieldElement{18606113, 1693100, -25448386, -15170272, 4112353, 10045021, 23603893, -2048234, -7550776, 2484985}, + FieldElement{9255317, -3131197, -12156162, -1004256, 13098013, -9214866, 16377220, -2102812, -19802075, -3034702}, + FieldElement{-22729289, 7496160, -5742199, 11329249, 19991973, -3347502, -31718148, 9936966, -30097688, -10618797}, + }, + { + FieldElement{21878590, -5001297, 4338336, 13643897, -3036865, 13160960, 19708896, 5415497, -7360503, -4109293}, + FieldElement{27736861, 10103576, 12500508, 8502413, -3413016, -9633558, 10436918, -1550276, -23659143, -8132100}, + FieldElement{19492550, -12104365, -29681976, -852630, -3208171, 12403437, 30066266, 8367329, 13243957, 8709688}, + }, + }, + { + { + FieldElement{12015105, 2801261, 28198131, 10151021, 24818120, -4743133, -11194191, -5645734, 5150968, 7274186}, + FieldElement{2831366, -12492146, 1478975, 6122054, 23825128, -12733586, 31097299, 6083058, 31021603, -9793610}, + FieldElement{-2529932, -2229646, 445613, 10720828, -13849527, -11505937, -23507731, 16354465, 15067285, -14147707}, + }, + { + FieldElement{7840942, 14037873, -33364863, 15934016, -728213, -3642706, 21403988, 1057586, -19379462, -12403220}, + FieldElement{915865, -16469274, 15608285, -8789130, -24357026, 6060030, -17371319, 8410997, -7220461, 16527025}, + FieldElement{32922597, -556987, 20336074, -16184568, 10903705, -5384487, 16957574, 52992, 23834301, 6588044}, + }, + { + FieldElement{32752030, 11232950, 3381995, -8714866, 22652988, -10744103, 17159699, 16689107, -20314580, -1305992}, + FieldElement{-4689649, 9166776, -25710296, -10847306, 11576752, 12733943, 7924251, -2752281, 1976123, -7249027}, + FieldElement{21251222, 16309901, -2983015, -6783122, 30810597, 12967303, 156041, -3371252, 12331345, -8237197}, + }, + { + FieldElement{8651614, -4477032, -16085636, -4996994, 13002507, 2950805, 29054427, -5106970, 10008136, -4667901}, + FieldElement{31486080, 15114593, -14261250, 12951354, 14369431, -7387845, 16347321, -13662089, 8684155, -10532952}, + FieldElement{19443825, 11385320, 24468943, -9659068, -23919258, 2187569, -26263207, -6086921, 31316348, 14219878}, + }, + { + FieldElement{-28594490, 1193785, 32245219, 11392485, 31092169, 15722801, 27146014, 6992409, 29126555, 9207390}, + FieldElement{32382935, 1110093, 18477781, 11028262, -27411763, -7548111, -4980517, 10843782, -7957600, -14435730}, + FieldElement{2814918, 7836403, 27519878, -7868156, -20894015, -11553689, -21494559, 8550130, 28346258, 1994730}, + }, + { + FieldElement{-19578299, 8085545, -14000519, -3948622, 2785838, -16231307, -19516951, 7174894, 22628102, 8115180}, + FieldElement{-30405132, 955511, -11133838, -15078069, -32447087, -13278079, -25651578, 3317160, -9943017, 930272}, + FieldElement{-15303681, -6833769, 28856490, 1357446, 23421993, 1057177, 24091212, -1388970, -22765376, -10650715}, + }, + { + FieldElement{-22751231, -5303997, -12907607, -12768866, -15811511, -7797053, -14839018, -16554220, -1867018, 8398970}, + FieldElement{-31969310, 2106403, -4736360, 1362501, 12813763, 16200670, 22981545, -6291273, 18009408, -15772772}, + FieldElement{-17220923, -9545221, -27784654, 14166835, 29815394, 7444469, 29551787, -3727419, 19288549, 1325865}, + }, + { + FieldElement{15100157, -15835752, -23923978, -1005098, -26450192, 15509408, 12376730, -3479146, 33166107, -8042750}, + FieldElement{20909231, 13023121, -9209752, 16251778, -5778415, -8094914, 12412151, 10018715, 2213263, -13878373}, + FieldElement{32529814, -11074689, 30361439, -16689753, -9135940, 1513226, 22922121, 6382134, -5766928, 8371348}, + }, + }, + { + { + FieldElement{9923462, 11271500, 12616794, 3544722, -29998368, -1721626, 12891687, -8193132, -26442943, 10486144}, + FieldElement{-22597207, -7012665, 8587003, -8257861, 4084309, -12970062, 361726, 2610596, -23921530, -11455195}, + FieldElement{5408411, -1136691, -4969122, 10561668, 24145918, 14240566, 31319731, -4235541, 19985175, -3436086}, + }, + { + FieldElement{-13994457, 16616821, 14549246, 3341099, 32155958, 13648976, -17577068, 8849297, 65030, 8370684}, + FieldElement{-8320926, -12049626, 31204563, 5839400, -20627288, -1057277, -19442942, 6922164, 12743482, -9800518}, + FieldElement{-2361371, 12678785, 28815050, 4759974, -23893047, 4884717, 23783145, 11038569, 18800704, 255233}, + }, + { + FieldElement{-5269658, -1773886, 13957886, 7990715, 23132995, 728773, 13393847, 9066957, 19258688, -14753793}, + FieldElement{-2936654, -10827535, -10432089, 14516793, -3640786, 4372541, -31934921, 2209390, -1524053, 2055794}, + FieldElement{580882, 16705327, 5468415, -2683018, -30926419, -14696000, -7203346, -8994389, -30021019, 7394435}, + }, + { + FieldElement{23838809, 1822728, -15738443, 15242727, 8318092, -3733104, -21672180, -3492205, -4821741, 14799921}, + FieldElement{13345610, 9759151, 3371034, -16137791, 16353039, 8577942, 31129804, 13496856, -9056018, 7402518}, + FieldElement{2286874, -4435931, -20042458, -2008336, -13696227, 5038122, 11006906, -15760352, 8205061, 1607563}, + }, + { + FieldElement{14414086, -8002132, 3331830, -3208217, 22249151, -5594188, 18364661, -2906958, 30019587, -9029278}, + FieldElement{-27688051, 1585953, -10775053, 931069, -29120221, -11002319, -14410829, 12029093, 9944378, 8024}, + FieldElement{4368715, -3709630, 29874200, -15022983, -20230386, -11410704, -16114594, -999085, -8142388, 5640030}, + }, + { + FieldElement{10299610, 13746483, 11661824, 16234854, 7630238, 5998374, 9809887, -16694564, 15219798, -14327783}, + FieldElement{27425505, -5719081, 3055006, 10660664, 23458024, 595578, -15398605, -1173195, -18342183, 9742717}, + FieldElement{6744077, 2427284, 26042789, 2720740, -847906, 1118974, 32324614, 7406442, 12420155, 1994844}, + }, + { + FieldElement{14012521, -5024720, -18384453, -9578469, -26485342, -3936439, -13033478, -10909803, 24319929, -6446333}, + FieldElement{16412690, -4507367, 10772641, 15929391, -17068788, -4658621, 10555945, -10484049, -30102368, -4739048}, + FieldElement{22397382, -7767684, -9293161, -12792868, 17166287, -9755136, -27333065, 6199366, 21880021, -12250760}, + }, + { + FieldElement{-4283307, 5368523, -31117018, 8163389, -30323063, 3209128, 16557151, 8890729, 8840445, 4957760}, + FieldElement{-15447727, 709327, -6919446, -10870178, -29777922, 6522332, -21720181, 12130072, -14796503, 5005757}, + FieldElement{-2114751, -14308128, 23019042, 15765735, -25269683, 6002752, 10183197, -13239326, -16395286, -2176112}, + }, + }, + { + { + FieldElement{-19025756, 1632005, 13466291, -7995100, -23640451, 16573537, -32013908, -3057104, 22208662, 2000468}, + FieldElement{3065073, -1412761, -25598674, -361432, -17683065, -5703415, -8164212, 11248527, -3691214, -7414184}, + FieldElement{10379208, -6045554, 8877319, 1473647, -29291284, -12507580, 16690915, 2553332, -3132688, 16400289}, + }, + { + FieldElement{15716668, 1254266, -18472690, 7446274, -8448918, 6344164, -22097271, -7285580, 26894937, 9132066}, + FieldElement{24158887, 12938817, 11085297, -8177598, -28063478, -4457083, -30576463, 64452, -6817084, -2692882}, + FieldElement{13488534, 7794716, 22236231, 5989356, 25426474, -12578208, 2350710, -3418511, -4688006, 2364226}, + }, + { + FieldElement{16335052, 9132434, 25640582, 6678888, 1725628, 8517937, -11807024, -11697457, 15445875, -7798101}, + FieldElement{29004207, -7867081, 28661402, -640412, -12794003, -7943086, 31863255, -4135540, -278050, -15759279}, + FieldElement{-6122061, -14866665, -28614905, 14569919, -10857999, -3591829, 10343412, -6976290, -29828287, -10815811}, + }, + { + FieldElement{27081650, 3463984, 14099042, -4517604, 1616303, -6205604, 29542636, 15372179, 17293797, 960709}, + FieldElement{20263915, 11434237, -5765435, 11236810, 13505955, -10857102, -16111345, 6493122, -19384511, 7639714}, + FieldElement{-2830798, -14839232, 25403038, -8215196, -8317012, -16173699, 18006287, -16043750, 29994677, -15808121}, + }, + { + FieldElement{9769828, 5202651, -24157398, -13631392, -28051003, -11561624, -24613141, -13860782, -31184575, 709464}, + FieldElement{12286395, 13076066, -21775189, -1176622, -25003198, 4057652, -32018128, -8890874, 16102007, 13205847}, + FieldElement{13733362, 5599946, 10557076, 3195751, -5557991, 8536970, -25540170, 8525972, 10151379, 10394400}, + }, + { + FieldElement{4024660, -16137551, 22436262, 12276534, -9099015, -2686099, 19698229, 11743039, -33302334, 8934414}, + FieldElement{-15879800, -4525240, -8580747, -2934061, 14634845, -698278, -9449077, 3137094, -11536886, 11721158}, + FieldElement{17555939, -5013938, 8268606, 2331751, -22738815, 9761013, 9319229, 8835153, -9205489, -1280045}, + }, + { + FieldElement{-461409, -7830014, 20614118, 16688288, -7514766, -4807119, 22300304, 505429, 6108462, -6183415}, + FieldElement{-5070281, 12367917, -30663534, 3234473, 32617080, -8422642, 29880583, -13483331, -26898490, -7867459}, + FieldElement{-31975283, 5726539, 26934134, 10237677, -3173717, -605053, 24199304, 3795095, 7592688, -14992079}, + }, + { + FieldElement{21594432, -14964228, 17466408, -4077222, 32537084, 2739898, 6407723, 12018833, -28256052, 4298412}, + FieldElement{-20650503, -11961496, -27236275, 570498, 3767144, -1717540, 13891942, -1569194, 13717174, 10805743}, + FieldElement{-14676630, -15644296, 15287174, 11927123, 24177847, -8175568, -796431, 14860609, -26938930, -5863836}, + }, + }, + { + { + FieldElement{12962541, 5311799, -10060768, 11658280, 18855286, -7954201, 13286263, -12808704, -4381056, 9882022}, + FieldElement{18512079, 11319350, -20123124, 15090309, 18818594, 5271736, -22727904, 3666879, -23967430, -3299429}, + FieldElement{-6789020, -3146043, 16192429, 13241070, 15898607, -14206114, -10084880, -6661110, -2403099, 5276065}, + }, + { + FieldElement{30169808, -5317648, 26306206, -11750859, 27814964, 7069267, 7152851, 3684982, 1449224, 13082861}, + FieldElement{10342826, 3098505, 2119311, 193222, 25702612, 12233820, 23697382, 15056736, -21016438, -8202000}, + FieldElement{-33150110, 3261608, 22745853, 7948688, 19370557, -15177665, -26171976, 6482814, -10300080, -11060101}, + }, + { + FieldElement{32869458, -5408545, 25609743, 15678670, -10687769, -15471071, 26112421, 2521008, -22664288, 6904815}, + FieldElement{29506923, 4457497, 3377935, -9796444, -30510046, 12935080, 1561737, 3841096, -29003639, -6657642}, + FieldElement{10340844, -6630377, -18656632, -2278430, 12621151, -13339055, 30878497, -11824370, -25584551, 5181966}, + }, + { + FieldElement{25940115, -12658025, 17324188, -10307374, -8671468, 15029094, 24396252, -16450922, -2322852, -12388574}, + FieldElement{-21765684, 9916823, -1300409, 4079498, -1028346, 11909559, 1782390, 12641087, 20603771, -6561742}, + FieldElement{-18882287, -11673380, 24849422, 11501709, 13161720, -4768874, 1925523, 11914390, 4662781, 7820689}, + }, + { + FieldElement{12241050, -425982, 8132691, 9393934, 32846760, -1599620, 29749456, 12172924, 16136752, 15264020}, + FieldElement{-10349955, -14680563, -8211979, 2330220, -17662549, -14545780, 10658213, 6671822, 19012087, 3772772}, + FieldElement{3753511, -3421066, 10617074, 2028709, 14841030, -6721664, 28718732, -15762884, 20527771, 12988982}, + }, + { + FieldElement{-14822485, -5797269, -3707987, 12689773, -898983, -10914866, -24183046, -10564943, 3299665, -12424953}, + FieldElement{-16777703, -15253301, -9642417, 4978983, 3308785, 8755439, 6943197, 6461331, -25583147, 8991218}, + FieldElement{-17226263, 1816362, -1673288, -6086439, 31783888, -8175991, -32948145, 7417950, -30242287, 1507265}, + }, + { + FieldElement{29692663, 6829891, -10498800, 4334896, 20945975, -11906496, -28887608, 8209391, 14606362, -10647073}, + FieldElement{-3481570, 8707081, 32188102, 5672294, 22096700, 1711240, -33020695, 9761487, 4170404, -2085325}, + FieldElement{-11587470, 14855945, -4127778, -1531857, -26649089, 15084046, 22186522, 16002000, -14276837, -8400798}, + }, + { + FieldElement{-4811456, 13761029, -31703877, -2483919, -3312471, 7869047, -7113572, -9620092, 13240845, 10965870}, + FieldElement{-7742563, -8256762, -14768334, -13656260, -23232383, 12387166, 4498947, 14147411, 29514390, 4302863}, + FieldElement{-13413405, -12407859, 20757302, -13801832, 14785143, 8976368, -5061276, -2144373, 17846988, -13971927}, + }, + }, + { + { + FieldElement{-2244452, -754728, -4597030, -1066309, -6247172, 1455299, -21647728, -9214789, -5222701, 12650267}, + FieldElement{-9906797, -16070310, 21134160, 12198166, -27064575, 708126, 387813, 13770293, -19134326, 10958663}, + FieldElement{22470984, 12369526, 23446014, -5441109, -21520802, -9698723, -11772496, -11574455, -25083830, 4271862}, + }, + { + FieldElement{-25169565, -10053642, -19909332, 15361595, -5984358, 2159192, 75375, -4278529, -32526221, 8469673}, + FieldElement{15854970, 4148314, -8893890, 7259002, 11666551, 13824734, -30531198, 2697372, 24154791, -9460943}, + FieldElement{15446137, -15806644, 29759747, 14019369, 30811221, -9610191, -31582008, 12840104, 24913809, 9815020}, + }, + { + FieldElement{-4709286, -5614269, -31841498, -12288893, -14443537, 10799414, -9103676, 13438769, 18735128, 9466238}, + FieldElement{11933045, 9281483, 5081055, -5183824, -2628162, -4905629, -7727821, -10896103, -22728655, 16199064}, + FieldElement{14576810, 379472, -26786533, -8317236, -29426508, -10812974, -102766, 1876699, 30801119, 2164795}, + }, + { + FieldElement{15995086, 3199873, 13672555, 13712240, -19378835, -4647646, -13081610, -15496269, -13492807, 1268052}, + FieldElement{-10290614, -3659039, -3286592, 10948818, 23037027, 3794475, -3470338, -12600221, -17055369, 3565904}, + FieldElement{29210088, -9419337, -5919792, -4952785, 10834811, -13327726, -16512102, -10820713, -27162222, -14030531}, + }, + { + FieldElement{-13161890, 15508588, 16663704, -8156150, -28349942, 9019123, -29183421, -3769423, 2244111, -14001979}, + FieldElement{-5152875, -3800936, -9306475, -6071583, 16243069, 14684434, -25673088, -16180800, 13491506, 4641841}, + FieldElement{10813417, 643330, -19188515, -728916, 30292062, -16600078, 27548447, -7721242, 14476989, -12767431}, + }, + { + FieldElement{10292079, 9984945, 6481436, 8279905, -7251514, 7032743, 27282937, -1644259, -27912810, 12651324}, + FieldElement{-31185513, -813383, 22271204, 11835308, 10201545, 15351028, 17099662, 3988035, 21721536, -3148940}, + FieldElement{10202177, -6545839, -31373232, -9574638, -32150642, -8119683, -12906320, 3852694, 13216206, 14842320}, + }, + { + FieldElement{-15815640, -10601066, -6538952, -7258995, -6984659, -6581778, -31500847, 13765824, -27434397, 9900184}, + FieldElement{14465505, -13833331, -32133984, -14738873, -27443187, 12990492, 33046193, 15796406, -7051866, -8040114}, + FieldElement{30924417, -8279620, 6359016, -12816335, 16508377, 9071735, -25488601, 15413635, 9524356, -7018878}, + }, + { + FieldElement{12274201, -13175547, 32627641, -1785326, 6736625, 13267305, 5237659, -5109483, 15663516, 4035784}, + FieldElement{-2951309, 8903985, 17349946, 601635, -16432815, -4612556, -13732739, -15889334, -22258478, 4659091}, + FieldElement{-16916263, -4952973, -30393711, -15158821, 20774812, 15897498, 5736189, 15026997, -2178256, -13455585}, + }, + }, + { + { + FieldElement{-8858980, -2219056, 28571666, -10155518, -474467, -10105698, -3801496, 278095, 23440562, -290208}, + FieldElement{10226241, -5928702, 15139956, 120818, -14867693, 5218603, 32937275, 11551483, -16571960, -7442864}, + FieldElement{17932739, -12437276, -24039557, 10749060, 11316803, 7535897, 22503767, 5561594, -3646624, 3898661}, + }, + { + FieldElement{7749907, -969567, -16339731, -16464, -25018111, 15122143, -1573531, 7152530, 21831162, 1245233}, + FieldElement{26958459, -14658026, 4314586, 8346991, -5677764, 11960072, -32589295, -620035, -30402091, -16716212}, + FieldElement{-12165896, 9166947, 33491384, 13673479, 29787085, 13096535, 6280834, 14587357, -22338025, 13987525}, + }, + { + FieldElement{-24349909, 7778775, 21116000, 15572597, -4833266, -5357778, -4300898, -5124639, -7469781, -2858068}, + FieldElement{9681908, -6737123, -31951644, 13591838, -6883821, 386950, 31622781, 6439245, -14581012, 4091397}, + FieldElement{-8426427, 1470727, -28109679, -1596990, 3978627, -5123623, -19622683, 12092163, 29077877, -14741988}, + }, + { + FieldElement{5269168, -6859726, -13230211, -8020715, 25932563, 1763552, -5606110, -5505881, -20017847, 2357889}, + FieldElement{32264008, -15407652, -5387735, -1160093, -2091322, -3946900, 23104804, -12869908, 5727338, 189038}, + FieldElement{14609123, -8954470, -6000566, -16622781, -14577387, -7743898, -26745169, 10942115, -25888931, -14884697}, + }, + { + FieldElement{20513500, 5557931, -15604613, 7829531, 26413943, -2019404, -21378968, 7471781, 13913677, -5137875}, + FieldElement{-25574376, 11967826, 29233242, 12948236, -6754465, 4713227, -8940970, 14059180, 12878652, 8511905}, + FieldElement{-25656801, 3393631, -2955415, -7075526, -2250709, 9366908, -30223418, 6812974, 5568676, -3127656}, + }, + { + FieldElement{11630004, 12144454, 2116339, 13606037, 27378885, 15676917, -17408753, -13504373, -14395196, 8070818}, + FieldElement{27117696, -10007378, -31282771, -5570088, 1127282, 12772488, -29845906, 10483306, -11552749, -1028714}, + FieldElement{10637467, -5688064, 5674781, 1072708, -26343588, -6982302, -1683975, 9177853, -27493162, 15431203}, + }, + { + FieldElement{20525145, 10892566, -12742472, 12779443, -29493034, 16150075, -28240519, 14943142, -15056790, -7935931}, + FieldElement{-30024462, 5626926, -551567, -9981087, 753598, 11981191, 25244767, -3239766, -3356550, 9594024}, + FieldElement{-23752644, 2636870, -5163910, -10103818, 585134, 7877383, 11345683, -6492290, 13352335, -10977084}, + }, + { + FieldElement{-1931799, -5407458, 3304649, -12884869, 17015806, -4877091, -29783850, -7752482, -13215537, -319204}, + FieldElement{20239939, 6607058, 6203985, 3483793, -18386976, -779229, -20723742, 15077870, -22750759, 14523817}, + FieldElement{27406042, -6041657, 27423596, -4497394, 4996214, 10002360, -28842031, -4545494, -30172742, -4805667}, + }, + }, + { + { + FieldElement{11374242, 12660715, 17861383, -12540833, 10935568, 1099227, -13886076, -9091740, -27727044, 11358504}, + FieldElement{-12730809, 10311867, 1510375, 10778093, -2119455, -9145702, 32676003, 11149336, -26123651, 4985768}, + FieldElement{-19096303, 341147, -6197485, -239033, 15756973, -8796662, -983043, 13794114, -19414307, -15621255}, + }, + { + FieldElement{6490081, 11940286, 25495923, -7726360, 8668373, -8751316, 3367603, 6970005, -1691065, -9004790}, + FieldElement{1656497, 13457317, 15370807, 6364910, 13605745, 8362338, -19174622, -5475723, -16796596, -5031438}, + FieldElement{-22273315, -13524424, -64685, -4334223, -18605636, -10921968, -20571065, -7007978, -99853, -10237333}, + }, + { + FieldElement{17747465, 10039260, 19368299, -4050591, -20630635, -16041286, 31992683, -15857976, -29260363, -5511971}, + FieldElement{31932027, -4986141, -19612382, 16366580, 22023614, 88450, 11371999, -3744247, 4882242, -10626905}, + FieldElement{29796507, 37186, 19818052, 10115756, -11829032, 3352736, 18551198, 3272828, -5190932, -4162409}, + }, + { + FieldElement{12501286, 4044383, -8612957, -13392385, -32430052, 5136599, -19230378, -3529697, 330070, -3659409}, + FieldElement{6384877, 2899513, 17807477, 7663917, -2358888, 12363165, 25366522, -8573892, -271295, 12071499}, + FieldElement{-8365515, -4042521, 25133448, -4517355, -6211027, 2265927, -32769618, 1936675, -5159697, 3829363}, + }, + { + FieldElement{28425966, -5835433, -577090, -4697198, -14217555, 6870930, 7921550, -6567787, 26333140, 14267664}, + FieldElement{-11067219, 11871231, 27385719, -10559544, -4585914, -11189312, 10004786, -8709488, -21761224, 8930324}, + FieldElement{-21197785, -16396035, 25654216, -1725397, 12282012, 11008919, 1541940, 4757911, -26491501, -16408940}, + }, + { + FieldElement{13537262, -7759490, -20604840, 10961927, -5922820, -13218065, -13156584, 6217254, -15943699, 13814990}, + FieldElement{-17422573, 15157790, 18705543, 29619, 24409717, -260476, 27361681, 9257833, -1956526, -1776914}, + FieldElement{-25045300, -10191966, 15366585, 15166509, -13105086, 8423556, -29171540, 12361135, -18685978, 4578290}, + }, + { + FieldElement{24579768, 3711570, 1342322, -11180126, -27005135, 14124956, -22544529, 14074919, 21964432, 8235257}, + FieldElement{-6528613, -2411497, 9442966, -5925588, 12025640, -1487420, -2981514, -1669206, 13006806, 2355433}, + FieldElement{-16304899, -13605259, -6632427, -5142349, 16974359, -10911083, 27202044, 1719366, 1141648, -12796236}, + }, + { + FieldElement{-12863944, -13219986, -8318266, -11018091, -6810145, -4843894, 13475066, -3133972, 32674895, 13715045}, + FieldElement{11423335, -5468059, 32344216, 8962751, 24989809, 9241752, -13265253, 16086212, -28740881, -15642093}, + FieldElement{-1409668, 12530728, -6368726, 10847387, 19531186, -14132160, -11709148, 7791794, -27245943, 4383347}, + }, + }, + { + { + FieldElement{-28970898, 5271447, -1266009, -9736989, -12455236, 16732599, -4862407, -4906449, 27193557, 6245191}, + FieldElement{-15193956, 5362278, -1783893, 2695834, 4960227, 12840725, 23061898, 3260492, 22510453, 8577507}, + FieldElement{-12632451, 11257346, -32692994, 13548177, -721004, 10879011, 31168030, 13952092, -29571492, -3635906}, + }, + { + FieldElement{3877321, -9572739, 32416692, 5405324, -11004407, -13656635, 3759769, 11935320, 5611860, 8164018}, + FieldElement{-16275802, 14667797, 15906460, 12155291, -22111149, -9039718, 32003002, -8832289, 5773085, -8422109}, + FieldElement{-23788118, -8254300, 1950875, 8937633, 18686727, 16459170, -905725, 12376320, 31632953, 190926}, + }, + { + FieldElement{-24593607, -16138885, -8423991, 13378746, 14162407, 6901328, -8288749, 4508564, -25341555, -3627528}, + FieldElement{8884438, -5884009, 6023974, 10104341, -6881569, -4941533, 18722941, -14786005, -1672488, 827625}, + FieldElement{-32720583, -16289296, -32503547, 7101210, 13354605, 2659080, -1800575, -14108036, -24878478, 1541286}, + }, + { + FieldElement{2901347, -1117687, 3880376, -10059388, -17620940, -3612781, -21802117, -3567481, 20456845, -1885033}, + FieldElement{27019610, 12299467, -13658288, -1603234, -12861660, -4861471, -19540150, -5016058, 29439641, 15138866}, + FieldElement{21536104, -6626420, -32447818, -10690208, -22408077, 5175814, -5420040, -16361163, 7779328, 109896}, + }, + { + FieldElement{30279744, 14648750, -8044871, 6425558, 13639621, -743509, 28698390, 12180118, 23177719, -554075}, + FieldElement{26572847, 3405927, -31701700, 12890905, -19265668, 5335866, -6493768, 2378492, 4439158, -13279347}, + FieldElement{-22716706, 3489070, -9225266, -332753, 18875722, -1140095, 14819434, -12731527, -17717757, -5461437}, + }, + { + FieldElement{-5056483, 16566551, 15953661, 3767752, -10436499, 15627060, -820954, 2177225, 8550082, -15114165}, + FieldElement{-18473302, 16596775, -381660, 15663611, 22860960, 15585581, -27844109, -3582739, -23260460, -8428588}, + FieldElement{-32480551, 15707275, -8205912, -5652081, 29464558, 2713815, -22725137, 15860482, -21902570, 1494193}, + }, + { + FieldElement{-19562091, -14087393, -25583872, -9299552, 13127842, 759709, 21923482, 16529112, 8742704, 12967017}, + FieldElement{-28464899, 1553205, 32536856, -10473729, -24691605, -406174, -8914625, -2933896, -29903758, 15553883}, + FieldElement{21877909, 3230008, 9881174, 10539357, -4797115, 2841332, 11543572, 14513274, 19375923, -12647961}, + }, + { + FieldElement{8832269, -14495485, 13253511, 5137575, 5037871, 4078777, 24880818, -6222716, 2862653, 9455043}, + FieldElement{29306751, 5123106, 20245049, -14149889, 9592566, 8447059, -2077124, -2990080, 15511449, 4789663}, + FieldElement{-20679756, 7004547, 8824831, -9434977, -4045704, -3750736, -5754762, 108893, 23513200, 16652362}, + }, + }, + { + { + FieldElement{-33256173, 4144782, -4476029, -6579123, 10770039, -7155542, -6650416, -12936300, -18319198, 10212860}, + FieldElement{2756081, 8598110, 7383731, -6859892, 22312759, -1105012, 21179801, 2600940, -9988298, -12506466}, + FieldElement{-24645692, 13317462, -30449259, -15653928, 21365574, -10869657, 11344424, 864440, -2499677, -16710063}, + }, + { + FieldElement{-26432803, 6148329, -17184412, -14474154, 18782929, -275997, -22561534, 211300, 2719757, 4940997}, + FieldElement{-1323882, 3911313, -6948744, 14759765, -30027150, 7851207, 21690126, 8518463, 26699843, 5276295}, + FieldElement{-13149873, -6429067, 9396249, 365013, 24703301, -10488939, 1321586, 149635, -15452774, 7159369}, + }, + { + FieldElement{9987780, -3404759, 17507962, 9505530, 9731535, -2165514, 22356009, 8312176, 22477218, -8403385}, + FieldElement{18155857, -16504990, 19744716, 9006923, 15154154, -10538976, 24256460, -4864995, -22548173, 9334109}, + FieldElement{2986088, -4911893, 10776628, -3473844, 10620590, -7083203, -21413845, 14253545, -22587149, 536906}, + }, + { + FieldElement{4377756, 8115836, 24567078, 15495314, 11625074, 13064599, 7390551, 10589625, 10838060, -15420424}, + FieldElement{-19342404, 867880, 9277171, -3218459, -14431572, -1986443, 19295826, -15796950, 6378260, 699185}, + FieldElement{7895026, 4057113, -7081772, -13077756, -17886831, -323126, -716039, 15693155, -5045064, -13373962}, + }, + { + FieldElement{-7737563, -5869402, -14566319, -7406919, 11385654, 13201616, 31730678, -10962840, -3918636, -9669325}, + FieldElement{10188286, -15770834, -7336361, 13427543, 22223443, 14896287, 30743455, 7116568, -21786507, 5427593}, + FieldElement{696102, 13206899, 27047647, -10632082, 15285305, -9853179, 10798490, -4578720, 19236243, 12477404}, + }, + { + FieldElement{-11229439, 11243796, -17054270, -8040865, -788228, -8167967, -3897669, 11180504, -23169516, 7733644}, + FieldElement{17800790, -14036179, -27000429, -11766671, 23887827, 3149671, 23466177, -10538171, 10322027, 15313801}, + FieldElement{26246234, 11968874, 32263343, -5468728, 6830755, -13323031, -15794704, -101982, -24449242, 10890804}, + }, + { + FieldElement{-31365647, 10271363, -12660625, -6267268, 16690207, -13062544, -14982212, 16484931, 25180797, -5334884}, + FieldElement{-586574, 10376444, -32586414, -11286356, 19801893, 10997610, 2276632, 9482883, 316878, 13820577}, + FieldElement{-9882808, -4510367, -2115506, 16457136, -11100081, 11674996, 30756178, -7515054, 30696930, -3712849}, + }, + { + FieldElement{32988917, -9603412, 12499366, 7910787, -10617257, -11931514, -7342816, -9985397, -32349517, 7392473}, + FieldElement{-8855661, 15927861, 9866406, -3649411, -2396914, -16655781, -30409476, -9134995, 25112947, -2926644}, + FieldElement{-2504044, -436966, 25621774, -5678772, 15085042, -5479877, -24884878, -13526194, 5537438, -13914319}, + }, + }, + { + { + FieldElement{-11225584, 2320285, -9584280, 10149187, -33444663, 5808648, -14876251, -1729667, 31234590, 6090599}, + FieldElement{-9633316, 116426, 26083934, 2897444, -6364437, -2688086, 609721, 15878753, -6970405, -9034768}, + FieldElement{-27757857, 247744, -15194774, -9002551, 23288161, -10011936, -23869595, 6503646, 20650474, 1804084}, + }, + { + FieldElement{-27589786, 15456424, 8972517, 8469608, 15640622, 4439847, 3121995, -10329713, 27842616, -202328}, + FieldElement{-15306973, 2839644, 22530074, 10026331, 4602058, 5048462, 28248656, 5031932, -11375082, 12714369}, + FieldElement{20807691, -7270825, 29286141, 11421711, -27876523, -13868230, -21227475, 1035546, -19733229, 12796920}, + }, + { + FieldElement{12076899, -14301286, -8785001, -11848922, -25012791, 16400684, -17591495, -12899438, 3480665, -15182815}, + FieldElement{-32361549, 5457597, 28548107, 7833186, 7303070, -11953545, -24363064, -15921875, -33374054, 2771025}, + FieldElement{-21389266, 421932, 26597266, 6860826, 22486084, -6737172, -17137485, -4210226, -24552282, 15673397}, + }, + { + FieldElement{-20184622, 2338216, 19788685, -9620956, -4001265, -8740893, -20271184, 4733254, 3727144, -12934448}, + FieldElement{6120119, 814863, -11794402, -622716, 6812205, -15747771, 2019594, 7975683, 31123697, -10958981}, + FieldElement{30069250, -11435332, 30434654, 2958439, 18399564, -976289, 12296869, 9204260, -16432438, 9648165}, + }, + { + FieldElement{32705432, -1550977, 30705658, 7451065, -11805606, 9631813, 3305266, 5248604, -26008332, -11377501}, + FieldElement{17219865, 2375039, -31570947, -5575615, -19459679, 9219903, 294711, 15298639, 2662509, -16297073}, + FieldElement{-1172927, -7558695, -4366770, -4287744, -21346413, -8434326, 32087529, -1222777, 32247248, -14389861}, + }, + { + FieldElement{14312628, 1221556, 17395390, -8700143, -4945741, -8684635, -28197744, -9637817, -16027623, -13378845}, + FieldElement{-1428825, -9678990, -9235681, 6549687, -7383069, -468664, 23046502, 9803137, 17597934, 2346211}, + FieldElement{18510800, 15337574, 26171504, 981392, -22241552, 7827556, -23491134, -11323352, 3059833, -11782870}, + }, + { + FieldElement{10141598, 6082907, 17829293, -1947643, 9830092, 13613136, -25556636, -5544586, -33502212, 3592096}, + FieldElement{33114168, -15889352, -26525686, -13343397, 33076705, 8716171, 1151462, 1521897, -982665, -6837803}, + FieldElement{-32939165, -4255815, 23947181, -324178, -33072974, -12305637, -16637686, 3891704, 26353178, 693168}, + }, + { + FieldElement{30374239, 1595580, -16884039, 13186931, 4600344, 406904, 9585294, -400668, 31375464, 14369965}, + FieldElement{-14370654, -7772529, 1510301, 6434173, -18784789, -6262728, 32732230, -13108839, 17901441, 16011505}, + FieldElement{18171223, -11934626, -12500402, 15197122, -11038147, -15230035, -19172240, -16046376, 8764035, 12309598}, + }, + }, + { + { + FieldElement{5975908, -5243188, -19459362, -9681747, -11541277, 14015782, -23665757, 1228319, 17544096, -10593782}, + FieldElement{5811932, -1715293, 3442887, -2269310, -18367348, -8359541, -18044043, -15410127, -5565381, 12348900}, + FieldElement{-31399660, 11407555, 25755363, 6891399, -3256938, 14872274, -24849353, 8141295, -10632534, -585479}, + }, + { + FieldElement{-12675304, 694026, -5076145, 13300344, 14015258, -14451394, -9698672, -11329050, 30944593, 1130208}, + FieldElement{8247766, -6710942, -26562381, -7709309, -14401939, -14648910, 4652152, 2488540, 23550156, -271232}, + FieldElement{17294316, -3788438, 7026748, 15626851, 22990044, 113481, 2267737, -5908146, -408818, -137719}, + }, + { + FieldElement{16091085, -16253926, 18599252, 7340678, 2137637, -1221657, -3364161, 14550936, 3260525, -7166271}, + FieldElement{-4910104, -13332887, 18550887, 10864893, -16459325, -7291596, -23028869, -13204905, -12748722, 2701326}, + FieldElement{-8574695, 16099415, 4629974, -16340524, -20786213, -6005432, -10018363, 9276971, 11329923, 1862132}, + }, + { + FieldElement{14763076, -15903608, -30918270, 3689867, 3511892, 10313526, -21951088, 12219231, -9037963, -940300}, + FieldElement{8894987, -3446094, 6150753, 3013931, 301220, 15693451, -31981216, -2909717, -15438168, 11595570}, + FieldElement{15214962, 3537601, -26238722, -14058872, 4418657, -15230761, 13947276, 10730794, -13489462, -4363670}, + }, + { + FieldElement{-2538306, 7682793, 32759013, 263109, -29984731, -7955452, -22332124, -10188635, 977108, 699994}, + FieldElement{-12466472, 4195084, -9211532, 550904, -15565337, 12917920, 19118110, -439841, -30534533, -14337913}, + FieldElement{31788461, -14507657, 4799989, 7372237, 8808585, -14747943, 9408237, -10051775, 12493932, -5409317}, + }, + { + FieldElement{-25680606, 5260744, -19235809, -6284470, -3695942, 16566087, 27218280, 2607121, 29375955, 6024730}, + FieldElement{842132, -2794693, -4763381, -8722815, 26332018, -12405641, 11831880, 6985184, -9940361, 2854096}, + FieldElement{-4847262, -7969331, 2516242, -5847713, 9695691, -7221186, 16512645, 960770, 12121869, 16648078}, + }, + { + FieldElement{-15218652, 14667096, -13336229, 2013717, 30598287, -464137, -31504922, -7882064, 20237806, 2838411}, + FieldElement{-19288047, 4453152, 15298546, -16178388, 22115043, -15972604, 12544294, -13470457, 1068881, -12499905}, + FieldElement{-9558883, -16518835, 33238498, 13506958, 30505848, -1114596, -8486907, -2630053, 12521378, 4845654}, + }, + { + FieldElement{-28198521, 10744108, -2958380, 10199664, 7759311, -13088600, 3409348, -873400, -6482306, -12885870}, + FieldElement{-23561822, 6230156, -20382013, 10655314, -24040585, -11621172, 10477734, -1240216, -3113227, 13974498}, + FieldElement{12966261, 15550616, -32038948, -1615346, 21025980, -629444, 5642325, 7188737, 18895762, 12629579}, + }, + }, + { + { + FieldElement{14741879, -14946887, 22177208, -11721237, 1279741, 8058600, 11758140, 789443, 32195181, 3895677}, + FieldElement{10758205, 15755439, -4509950, 9243698, -4879422, 6879879, -2204575, -3566119, -8982069, 4429647}, + FieldElement{-2453894, 15725973, -20436342, -10410672, -5803908, -11040220, -7135870, -11642895, 18047436, -15281743}, + }, + { + FieldElement{-25173001, -11307165, 29759956, 11776784, -22262383, -15820455, 10993114, -12850837, -17620701, -9408468}, + FieldElement{21987233, 700364, -24505048, 14972008, -7774265, -5718395, 32155026, 2581431, -29958985, 8773375}, + FieldElement{-25568350, 454463, -13211935, 16126715, 25240068, 8594567, 20656846, 12017935, -7874389, -13920155}, + }, + { + FieldElement{6028182, 6263078, -31011806, -11301710, -818919, 2461772, -31841174, -5468042, -1721788, -2776725}, + FieldElement{-12278994, 16624277, 987579, -5922598, 32908203, 1248608, 7719845, -4166698, 28408820, 6816612}, + FieldElement{-10358094, -8237829, 19549651, -12169222, 22082623, 16147817, 20613181, 13982702, -10339570, 5067943}, + }, + { + FieldElement{-30505967, -3821767, 12074681, 13582412, -19877972, 2443951, -19719286, 12746132, 5331210, -10105944}, + FieldElement{30528811, 3601899, -1957090, 4619785, -27361822, -15436388, 24180793, -12570394, 27679908, -1648928}, + FieldElement{9402404, -13957065, 32834043, 10838634, -26580150, -13237195, 26653274, -8685565, 22611444, -12715406}, + }, + { + FieldElement{22190590, 1118029, 22736441, 15130463, -30460692, -5991321, 19189625, -4648942, 4854859, 6622139}, + FieldElement{-8310738, -2953450, -8262579, -3388049, -10401731, -271929, 13424426, -3567227, 26404409, 13001963}, + FieldElement{-31241838, -15415700, -2994250, 8939346, 11562230, -12840670, -26064365, -11621720, -15405155, 11020693}, + }, + { + FieldElement{1866042, -7949489, -7898649, -10301010, 12483315, 13477547, 3175636, -12424163, 28761762, 1406734}, + FieldElement{-448555, -1777666, 13018551, 3194501, -9580420, -11161737, 24760585, -4347088, 25577411, -13378680}, + FieldElement{-24290378, 4759345, -690653, -1852816, 2066747, 10693769, -29595790, 9884936, -9368926, 4745410}, + }, + { + FieldElement{-9141284, 6049714, -19531061, -4341411, -31260798, 9944276, -15462008, -11311852, 10931924, -11931931}, + FieldElement{-16561513, 14112680, -8012645, 4817318, -8040464, -11414606, -22853429, 10856641, -20470770, 13434654}, + FieldElement{22759489, -10073434, -16766264, -1871422, 13637442, -10168091, 1765144, -12654326, 28445307, -5364710}, + }, + { + FieldElement{29875063, 12493613, 2795536, -3786330, 1710620, 15181182, -10195717, -8788675, 9074234, 1167180}, + FieldElement{-26205683, 11014233, -9842651, -2635485, -26908120, 7532294, -18716888, -9535498, 3843903, 9367684}, + FieldElement{-10969595, -6403711, 9591134, 9582310, 11349256, 108879, 16235123, 8601684, -139197, 4242895}, + }, + }, + { + { + FieldElement{22092954, -13191123, -2042793, -11968512, 32186753, -11517388, -6574341, 2470660, -27417366, 16625501}, + FieldElement{-11057722, 3042016, 13770083, -9257922, 584236, -544855, -7770857, 2602725, -27351616, 14247413}, + FieldElement{6314175, -10264892, -32772502, 15957557, -10157730, 168750, -8618807, 14290061, 27108877, -1180880}, + }, + { + FieldElement{-8586597, -7170966, 13241782, 10960156, -32991015, -13794596, 33547976, -11058889, -27148451, 981874}, + FieldElement{22833440, 9293594, -32649448, -13618667, -9136966, 14756819, -22928859, -13970780, -10479804, -16197962}, + FieldElement{-7768587, 3326786, -28111797, 10783824, 19178761, 14905060, 22680049, 13906969, -15933690, 3797899}, + }, + { + FieldElement{21721356, -4212746, -12206123, 9310182, -3882239, -13653110, 23740224, -2709232, 20491983, -8042152}, + FieldElement{9209270, -15135055, -13256557, -6167798, -731016, 15289673, 25947805, 15286587, 30997318, -6703063}, + FieldElement{7392032, 16618386, 23946583, -8039892, -13265164, -1533858, -14197445, -2321576, 17649998, -250080}, + }, + { + FieldElement{-9301088, -14193827, 30609526, -3049543, -25175069, -1283752, -15241566, -9525724, -2233253, 7662146}, + FieldElement{-17558673, 1763594, -33114336, 15908610, -30040870, -12174295, 7335080, -8472199, -3174674, 3440183}, + FieldElement{-19889700, -5977008, -24111293, -9688870, 10799743, -16571957, 40450, -4431835, 4862400, 1133}, + }, + { + FieldElement{-32856209, -7873957, -5422389, 14860950, -16319031, 7956142, 7258061, 311861, -30594991, -7379421}, + FieldElement{-3773428, -1565936, 28985340, 7499440, 24445838, 9325937, 29727763, 16527196, 18278453, 15405622}, + FieldElement{-4381906, 8508652, -19898366, -3674424, -5984453, 15149970, -13313598, 843523, -21875062, 13626197}, + }, + { + FieldElement{2281448, -13487055, -10915418, -2609910, 1879358, 16164207, -10783882, 3953792, 13340839, 15928663}, + FieldElement{31727126, -7179855, -18437503, -8283652, 2875793, -16390330, -25269894, -7014826, -23452306, 5964753}, + FieldElement{4100420, -5959452, -17179337, 6017714, -18705837, 12227141, -26684835, 11344144, 2538215, -7570755}, + }, + { + FieldElement{-9433605, 6123113, 11159803, -2156608, 30016280, 14966241, -20474983, 1485421, -629256, -15958862}, + FieldElement{-26804558, 4260919, 11851389, 9658551, -32017107, 16367492, -20205425, -13191288, 11659922, -11115118}, + FieldElement{26180396, 10015009, -30844224, -8581293, 5418197, 9480663, 2231568, -10170080, 33100372, -1306171}, + }, + { + FieldElement{15121113, -5201871, -10389905, 15427821, -27509937, -15992507, 21670947, 4486675, -5931810, -14466380}, + FieldElement{16166486, -9483733, -11104130, 6023908, -31926798, -1364923, 2340060, -16254968, -10735770, -10039824}, + FieldElement{28042865, -3557089, -12126526, 12259706, -3717498, -6945899, 6766453, -8689599, 18036436, 5803270}, + }, + }, + { + { + FieldElement{-817581, 6763912, 11803561, 1585585, 10958447, -2671165, 23855391, 4598332, -6159431, -14117438}, + FieldElement{-31031306, -14256194, 17332029, -2383520, 31312682, -5967183, 696309, 50292, -20095739, 11763584}, + FieldElement{-594563, -2514283, -32234153, 12643980, 12650761, 14811489, 665117, -12613632, -19773211, -10713562}, + }, + { + FieldElement{30464590, -11262872, -4127476, -12734478, 19835327, -7105613, -24396175, 2075773, -17020157, 992471}, + FieldElement{18357185, -6994433, 7766382, 16342475, -29324918, 411174, 14578841, 8080033, -11574335, -10601610}, + FieldElement{19598397, 10334610, 12555054, 2555664, 18821899, -10339780, 21873263, 16014234, 26224780, 16452269}, + }, + { + FieldElement{-30223925, 5145196, 5944548, 16385966, 3976735, 2009897, -11377804, -7618186, -20533829, 3698650}, + FieldElement{14187449, 3448569, -10636236, -10810935, -22663880, -3433596, 7268410, -10890444, 27394301, 12015369}, + FieldElement{19695761, 16087646, 28032085, 12999827, 6817792, 11427614, 20244189, -1312777, -13259127, -3402461}, + }, + { + FieldElement{30860103, 12735208, -1888245, -4699734, -16974906, 2256940, -8166013, 12298312, -8550524, -10393462}, + FieldElement{-5719826, -11245325, -1910649, 15569035, 26642876, -7587760, -5789354, -15118654, -4976164, 12651793}, + FieldElement{-2848395, 9953421, 11531313, -5282879, 26895123, -12697089, -13118820, -16517902, 9768698, -2533218}, + }, + { + FieldElement{-24719459, 1894651, -287698, -4704085, 15348719, -8156530, 32767513, 12765450, 4940095, 10678226}, + FieldElement{18860224, 15980149, -18987240, -1562570, -26233012, -11071856, -7843882, 13944024, -24372348, 16582019}, + FieldElement{-15504260, 4970268, -29893044, 4175593, -20993212, -2199756, -11704054, 15444560, -11003761, 7989037}, + }, + { + FieldElement{31490452, 5568061, -2412803, 2182383, -32336847, 4531686, -32078269, 6200206, -19686113, -14800171}, + FieldElement{-17308668, -15879940, -31522777, -2831, -32887382, 16375549, 8680158, -16371713, 28550068, -6857132}, + FieldElement{-28126887, -5688091, 16837845, -1820458, -6850681, 12700016, -30039981, 4364038, 1155602, 5988841}, + }, + { + FieldElement{21890435, -13272907, -12624011, 12154349, -7831873, 15300496, 23148983, -4470481, 24618407, 8283181}, + FieldElement{-33136107, -10512751, 9975416, 6841041, -31559793, 16356536, 3070187, -7025928, 1466169, 10740210}, + FieldElement{-1509399, -15488185, -13503385, -10655916, 32799044, 909394, -13938903, -5779719, -32164649, -15327040}, + }, + { + FieldElement{3960823, -14267803, -28026090, -15918051, -19404858, 13146868, 15567327, 951507, -3260321, -573935}, + FieldElement{24740841, 5052253, -30094131, 8961361, 25877428, 6165135, -24368180, 14397372, -7380369, -6144105}, + FieldElement{-28888365, 3510803, -28103278, -1158478, -11238128, -10631454, -15441463, -14453128, -1625486, -6494814}, + }, + }, + { + { + FieldElement{793299, -9230478, 8836302, -6235707, -27360908, -2369593, 33152843, -4885251, -9906200, -621852}, + FieldElement{5666233, 525582, 20782575, -8038419, -24538499, 14657740, 16099374, 1468826, -6171428, -15186581}, + FieldElement{-4859255, -3779343, -2917758, -6748019, 7778750, 11688288, -30404353, -9871238, -1558923, -9863646}, + }, + { + FieldElement{10896332, -7719704, 824275, 472601, -19460308, 3009587, 25248958, 14783338, -30581476, -15757844}, + FieldElement{10566929, 12612572, -31944212, 11118703, -12633376, 12362879, 21752402, 8822496, 24003793, 14264025}, + FieldElement{27713862, -7355973, -11008240, 9227530, 27050101, 2504721, 23886875, -13117525, 13958495, -5732453}, + }, + { + FieldElement{-23481610, 4867226, -27247128, 3900521, 29838369, -8212291, -31889399, -10041781, 7340521, -15410068}, + FieldElement{4646514, -8011124, -22766023, -11532654, 23184553, 8566613, 31366726, -1381061, -15066784, -10375192}, + FieldElement{-17270517, 12723032, -16993061, 14878794, 21619651, -6197576, 27584817, 3093888, -8843694, 3849921}, + }, + { + FieldElement{-9064912, 2103172, 25561640, -15125738, -5239824, 9582958, 32477045, -9017955, 5002294, -15550259}, + FieldElement{-12057553, -11177906, 21115585, -13365155, 8808712, -12030708, 16489530, 13378448, -25845716, 12741426}, + FieldElement{-5946367, 10645103, -30911586, 15390284, -3286982, -7118677, 24306472, 15852464, 28834118, -7646072}, + }, + { + FieldElement{-17335748, -9107057, -24531279, 9434953, -8472084, -583362, -13090771, 455841, 20461858, 5491305}, + FieldElement{13669248, -16095482, -12481974, -10203039, -14569770, -11893198, -24995986, 11293807, -28588204, -9421832}, + FieldElement{28497928, 6272777, -33022994, 14470570, 8906179, -1225630, 18504674, -14165166, 29867745, -8795943}, + }, + { + FieldElement{-16207023, 13517196, -27799630, -13697798, 24009064, -6373891, -6367600, -13175392, 22853429, -4012011}, + FieldElement{24191378, 16712145, -13931797, 15217831, 14542237, 1646131, 18603514, -11037887, 12876623, -2112447}, + FieldElement{17902668, 4518229, -411702, -2829247, 26878217, 5258055, -12860753, 608397, 16031844, 3723494}, + }, + { + FieldElement{-28632773, 12763728, -20446446, 7577504, 33001348, -13017745, 17558842, -7872890, 23896954, -4314245}, + FieldElement{-20005381, -12011952, 31520464, 605201, 2543521, 5991821, -2945064, 7229064, -9919646, -8826859}, + FieldElement{28816045, 298879, -28165016, -15920938, 19000928, -1665890, -12680833, -2949325, -18051778, -2082915}, + }, + { + FieldElement{16000882, -344896, 3493092, -11447198, -29504595, -13159789, 12577740, 16041268, -19715240, 7847707}, + FieldElement{10151868, 10572098, 27312476, 7922682, 14825339, 4723128, -32855931, -6519018, -10020567, 3852848}, + FieldElement{-11430470, 15697596, -21121557, -4420647, 5386314, 15063598, 16514493, -15932110, 29330899, -15076224}, + }, + }, + { + { + FieldElement{-25499735, -4378794, -15222908, -6901211, 16615731, 2051784, 3303702, 15490, -27548796, 12314391}, + FieldElement{15683520, -6003043, 18109120, -9980648, 15337968, -5997823, -16717435, 15921866, 16103996, -3731215}, + FieldElement{-23169824, -10781249, 13588192, -1628807, -3798557, -1074929, -19273607, 5402699, -29815713, -9841101}, + }, + { + FieldElement{23190676, 2384583, -32714340, 3462154, -29903655, -1529132, -11266856, 8911517, -25205859, 2739713}, + FieldElement{21374101, -3554250, -33524649, 9874411, 15377179, 11831242, -33529904, 6134907, 4931255, 11987849}, + FieldElement{-7732, -2978858, -16223486, 7277597, 105524, -322051, -31480539, 13861388, -30076310, 10117930}, + }, + { + FieldElement{-29501170, -10744872, -26163768, 13051539, -25625564, 5089643, -6325503, 6704079, 12890019, 15728940}, + FieldElement{-21972360, -11771379, -951059, -4418840, 14704840, 2695116, 903376, -10428139, 12885167, 8311031}, + FieldElement{-17516482, 5352194, 10384213, -13811658, 7506451, 13453191, 26423267, 4384730, 1888765, -5435404}, + }, + { + FieldElement{-25817338, -3107312, -13494599, -3182506, 30896459, -13921729, -32251644, -12707869, -19464434, -3340243}, + FieldElement{-23607977, -2665774, -526091, 4651136, 5765089, 4618330, 6092245, 14845197, 17151279, -9854116}, + FieldElement{-24830458, -12733720, -15165978, 10367250, -29530908, -265356, 22825805, -7087279, -16866484, 16176525}, + }, + { + FieldElement{-23583256, 6564961, 20063689, 3798228, -4740178, 7359225, 2006182, -10363426, -28746253, -10197509}, + FieldElement{-10626600, -4486402, -13320562, -5125317, 3432136, -6393229, 23632037, -1940610, 32808310, 1099883}, + FieldElement{15030977, 5768825, -27451236, -2887299, -6427378, -15361371, -15277896, -6809350, 2051441, -15225865}, + }, + { + FieldElement{-3362323, -7239372, 7517890, 9824992, 23555850, 295369, 5148398, -14154188, -22686354, 16633660}, + FieldElement{4577086, -16752288, 13249841, -15304328, 19958763, -14537274, 18559670, -10759549, 8402478, -9864273}, + FieldElement{-28406330, -1051581, -26790155, -907698, -17212414, -11030789, 9453451, -14980072, 17983010, 9967138}, + }, + { + FieldElement{-25762494, 6524722, 26585488, 9969270, 24709298, 1220360, -1677990, 7806337, 17507396, 3651560}, + FieldElement{-10420457, -4118111, 14584639, 15971087, -15768321, 8861010, 26556809, -5574557, -18553322, -11357135}, + FieldElement{2839101, 14284142, 4029895, 3472686, 14402957, 12689363, -26642121, 8459447, -5605463, -7621941}, + }, + { + FieldElement{-4839289, -3535444, 9744961, 2871048, 25113978, 3187018, -25110813, -849066, 17258084, -7977739}, + FieldElement{18164541, -10595176, -17154882, -1542417, 19237078, -9745295, 23357533, -15217008, 26908270, 12150756}, + FieldElement{-30264870, -7647865, 5112249, -7036672, -1499807, -6974257, 43168, -5537701, -32302074, 16215819}, + }, + }, + { + { + FieldElement{-6898905, 9824394, -12304779, -4401089, -31397141, -6276835, 32574489, 12532905, -7503072, -8675347}, + FieldElement{-27343522, -16515468, -27151524, -10722951, 946346, 16291093, 254968, 7168080, 21676107, -1943028}, + FieldElement{21260961, -8424752, -16831886, -11920822, -23677961, 3968121, -3651949, -6215466, -3556191, -7913075}, + }, + { + FieldElement{16544754, 13250366, -16804428, 15546242, -4583003, 12757258, -2462308, -8680336, -18907032, -9662799}, + FieldElement{-2415239, -15577728, 18312303, 4964443, -15272530, -12653564, 26820651, 16690659, 25459437, -4564609}, + FieldElement{-25144690, 11425020, 28423002, -11020557, -6144921, -15826224, 9142795, -2391602, -6432418, -1644817}, + }, + { + FieldElement{-23104652, 6253476, 16964147, -3768872, -25113972, -12296437, -27457225, -16344658, 6335692, 7249989}, + FieldElement{-30333227, 13979675, 7503222, -12368314, -11956721, -4621693, -30272269, 2682242, 25993170, -12478523}, + FieldElement{4364628, 5930691, 32304656, -10044554, -8054781, 15091131, 22857016, -10598955, 31820368, 15075278}, + }, + { + FieldElement{31879134, -8918693, 17258761, 90626, -8041836, -4917709, 24162788, -9650886, -17970238, 12833045}, + FieldElement{19073683, 14851414, -24403169, -11860168, 7625278, 11091125, -19619190, 2074449, -9413939, 14905377}, + FieldElement{24483667, -11935567, -2518866, -11547418, -1553130, 15355506, -25282080, 9253129, 27628530, -7555480}, + }, + { + FieldElement{17597607, 8340603, 19355617, 552187, 26198470, -3176583, 4593324, -9157582, -14110875, 15297016}, + FieldElement{510886, 14337390, -31785257, 16638632, 6328095, 2713355, -20217417, -11864220, 8683221, 2921426}, + FieldElement{18606791, 11874196, 27155355, -5281482, -24031742, 6265446, -25178240, -1278924, 4674690, 13890525}, + }, + { + FieldElement{13609624, 13069022, -27372361, -13055908, 24360586, 9592974, 14977157, 9835105, 4389687, 288396}, + FieldElement{9922506, -519394, 13613107, 5883594, -18758345, -434263, -12304062, 8317628, 23388070, 16052080}, + FieldElement{12720016, 11937594, -31970060, -5028689, 26900120, 8561328, -20155687, -11632979, -14754271, -10812892}, + }, + { + FieldElement{15961858, 14150409, 26716931, -665832, -22794328, 13603569, 11829573, 7467844, -28822128, 929275}, + FieldElement{11038231, -11582396, -27310482, -7316562, -10498527, -16307831, -23479533, -9371869, -21393143, 2465074}, + FieldElement{20017163, -4323226, 27915242, 1529148, 12396362, 15675764, 13817261, -9658066, 2463391, -4622140}, + }, + { + FieldElement{-16358878, -12663911, -12065183, 4996454, -1256422, 1073572, 9583558, 12851107, 4003896, 12673717}, + FieldElement{-1731589, -15155870, -3262930, 16143082, 19294135, 13385325, 14741514, -9103726, 7903886, 2348101}, + FieldElement{24536016, -16515207, 12715592, -3862155, 1511293, 10047386, -3842346, -7129159, -28377538, 10048127}, + }, + }, + { + { + FieldElement{-12622226, -6204820, 30718825, 2591312, -10617028, 12192840, 18873298, -7297090, -32297756, 15221632}, + FieldElement{-26478122, -11103864, 11546244, -1852483, 9180880, 7656409, -21343950, 2095755, 29769758, 6593415}, + FieldElement{-31994208, -2907461, 4176912, 3264766, 12538965, -868111, 26312345, -6118678, 30958054, 8292160}, + }, + { + FieldElement{31429822, -13959116, 29173532, 15632448, 12174511, -2760094, 32808831, 3977186, 26143136, -3148876}, + FieldElement{22648901, 1402143, -22799984, 13746059, 7936347, 365344, -8668633, -1674433, -3758243, -2304625}, + FieldElement{-15491917, 8012313, -2514730, -12702462, -23965846, -10254029, -1612713, -1535569, -16664475, 8194478}, + }, + { + FieldElement{27338066, -7507420, -7414224, 10140405, -19026427, -6589889, 27277191, 8855376, 28572286, 3005164}, + FieldElement{26287124, 4821776, 25476601, -4145903, -3764513, -15788984, -18008582, 1182479, -26094821, -13079595}, + FieldElement{-7171154, 3178080, 23970071, 6201893, -17195577, -4489192, -21876275, -13982627, 32208683, -1198248}, + }, + { + FieldElement{-16657702, 2817643, -10286362, 14811298, 6024667, 13349505, -27315504, -10497842, -27672585, -11539858}, + FieldElement{15941029, -9405932, -21367050, 8062055, 31876073, -238629, -15278393, -1444429, 15397331, -4130193}, + FieldElement{8934485, -13485467, -23286397, -13423241, -32446090, 14047986, 31170398, -1441021, -27505566, 15087184}, + }, + { + FieldElement{-18357243, -2156491, 24524913, -16677868, 15520427, -6360776, -15502406, 11461896, 16788528, -5868942}, + FieldElement{-1947386, 16013773, 21750665, 3714552, -17401782, -16055433, -3770287, -10323320, 31322514, -11615635}, + FieldElement{21426655, -5650218, -13648287, -5347537, -28812189, -4920970, -18275391, -14621414, 13040862, -12112948}, + }, + { + FieldElement{11293895, 12478086, -27136401, 15083750, -29307421, 14748872, 14555558, -13417103, 1613711, 4896935}, + FieldElement{-25894883, 15323294, -8489791, -8057900, 25967126, -13425460, 2825960, -4897045, -23971776, -11267415}, + FieldElement{-15924766, -5229880, -17443532, 6410664, 3622847, 10243618, 20615400, 12405433, -23753030, -8436416}, + }, + { + FieldElement{-7091295, 12556208, -20191352, 9025187, -17072479, 4333801, 4378436, 2432030, 23097949, -566018}, + FieldElement{4565804, -16025654, 20084412, -7842817, 1724999, 189254, 24767264, 10103221, -18512313, 2424778}, + FieldElement{366633, -11976806, 8173090, -6890119, 30788634, 5745705, -7168678, 1344109, -3642553, 12412659}, + }, + { + FieldElement{-24001791, 7690286, 14929416, -168257, -32210835, -13412986, 24162697, -15326504, -3141501, 11179385}, + FieldElement{18289522, -14724954, 8056945, 16430056, -21729724, 7842514, -6001441, -1486897, -18684645, -11443503}, + FieldElement{476239, 6601091, -6152790, -9723375, 17503545, -4863900, 27672959, 13403813, 11052904, 5219329}, + }, + }, + { + { + FieldElement{20678546, -8375738, -32671898, 8849123, -5009758, 14574752, 31186971, -3973730, 9014762, -8579056}, + FieldElement{-13644050, -10350239, -15962508, 5075808, -1514661, -11534600, -33102500, 9160280, 8473550, -3256838}, + FieldElement{24900749, 14435722, 17209120, -15292541, -22592275, 9878983, -7689309, -16335821, -24568481, 11788948}, + }, + { + FieldElement{-3118155, -11395194, -13802089, 14797441, 9652448, -6845904, -20037437, 10410733, -24568470, -1458691}, + FieldElement{-15659161, 16736706, -22467150, 10215878, -9097177, 7563911, 11871841, -12505194, -18513325, 8464118}, + FieldElement{-23400612, 8348507, -14585951, -861714, -3950205, -6373419, 14325289, 8628612, 33313881, -8370517}, + }, + { + FieldElement{-20186973, -4967935, 22367356, 5271547, -1097117, -4788838, -24805667, -10236854, -8940735, -5818269}, + FieldElement{-6948785, -1795212, -32625683, -16021179, 32635414, -7374245, 15989197, -12838188, 28358192, -4253904}, + FieldElement{-23561781, -2799059, -32351682, -1661963, -9147719, 10429267, -16637684, 4072016, -5351664, 5596589}, + }, + { + FieldElement{-28236598, -3390048, 12312896, 6213178, 3117142, 16078565, 29266239, 2557221, 1768301, 15373193}, + FieldElement{-7243358, -3246960, -4593467, -7553353, -127927, -912245, -1090902, -4504991, -24660491, 3442910}, + FieldElement{-30210571, 5124043, 14181784, 8197961, 18964734, -11939093, 22597931, 7176455, -18585478, 13365930}, + }, + { + FieldElement{-7877390, -1499958, 8324673, 4690079, 6261860, 890446, 24538107, -8570186, -9689599, -3031667}, + FieldElement{25008904, -10771599, -4305031, -9638010, 16265036, 15721635, 683793, -11823784, 15723479, -15163481}, + FieldElement{-9660625, 12374379, -27006999, -7026148, -7724114, -12314514, 11879682, 5400171, 519526, -1235876}, + }, + { + FieldElement{22258397, -16332233, -7869817, 14613016, -22520255, -2950923, -20353881, 7315967, 16648397, 7605640}, + FieldElement{-8081308, -8464597, -8223311, 9719710, 19259459, -15348212, 23994942, -5281555, -9468848, 4763278}, + FieldElement{-21699244, 9220969, -15730624, 1084137, -25476107, -2852390, 31088447, -7764523, -11356529, 728112}, + }, + { + FieldElement{26047220, -11751471, -6900323, -16521798, 24092068, 9158119, -4273545, -12555558, -29365436, -5498272}, + FieldElement{17510331, -322857, 5854289, 8403524, 17133918, -3112612, -28111007, 12327945, 10750447, 10014012}, + FieldElement{-10312768, 3936952, 9156313, -8897683, 16498692, -994647, -27481051, -666732, 3424691, 7540221}, + }, + { + FieldElement{30322361, -6964110, 11361005, -4143317, 7433304, 4989748, -7071422, -16317219, -9244265, 15258046}, + FieldElement{13054562, -2779497, 19155474, 469045, -12482797, 4566042, 5631406, 2711395, 1062915, -5136345}, + FieldElement{-19240248, -11254599, -29509029, -7499965, -5835763, 13005411, -6066489, 12194497, 32960380, 1459310}, + }, + }, + { + { + FieldElement{19852034, 7027924, 23669353, 10020366, 8586503, -6657907, 394197, -6101885, 18638003, -11174937}, + FieldElement{31395534, 15098109, 26581030, 8030562, -16527914, -5007134, 9012486, -7584354, -6643087, -5442636}, + FieldElement{-9192165, -2347377, -1997099, 4529534, 25766844, 607986, -13222, 9677543, -32294889, -6456008}, + }, + { + FieldElement{-2444496, -149937, 29348902, 8186665, 1873760, 12489863, -30934579, -7839692, -7852844, -8138429}, + FieldElement{-15236356, -15433509, 7766470, 746860, 26346930, -10221762, -27333451, 10754588, -9431476, 5203576}, + FieldElement{31834314, 14135496, -770007, 5159118, 20917671, -16768096, -7467973, -7337524, 31809243, 7347066}, + }, + { + FieldElement{-9606723, -11874240, 20414459, 13033986, 13716524, -11691881, 19797970, -12211255, 15192876, -2087490}, + FieldElement{-12663563, -2181719, 1168162, -3804809, 26747877, -14138091, 10609330, 12694420, 33473243, -13382104}, + FieldElement{33184999, 11180355, 15832085, -11385430, -1633671, 225884, 15089336, -11023903, -6135662, 14480053}, + }, + { + FieldElement{31308717, -5619998, 31030840, -1897099, 15674547, -6582883, 5496208, 13685227, 27595050, 8737275}, + FieldElement{-20318852, -15150239, 10933843, -16178022, 8335352, -7546022, -31008351, -12610604, 26498114, 66511}, + FieldElement{22644454, -8761729, -16671776, 4884562, -3105614, -13559366, 30540766, -4286747, -13327787, -7515095}, + }, + { + FieldElement{-28017847, 9834845, 18617207, -2681312, -3401956, -13307506, 8205540, 13585437, -17127465, 15115439}, + FieldElement{23711543, -672915, 31206561, -8362711, 6164647, -9709987, -33535882, -1426096, 8236921, 16492939}, + FieldElement{-23910559, -13515526, -26299483, -4503841, 25005590, -7687270, 19574902, 10071562, 6708380, -6222424}, + }, + { + FieldElement{2101391, -4930054, 19702731, 2367575, -15427167, 1047675, 5301017, 9328700, 29955601, -11678310}, + FieldElement{3096359, 9271816, -21620864, -15521844, -14847996, -7592937, -25892142, -12635595, -9917575, 6216608}, + FieldElement{-32615849, 338663, -25195611, 2510422, -29213566, -13820213, 24822830, -6146567, -26767480, 7525079}, + }, + { + FieldElement{-23066649, -13985623, 16133487, -7896178, -3389565, 778788, -910336, -2782495, -19386633, 11994101}, + FieldElement{21691500, -13624626, -641331, -14367021, 3285881, -3483596, -25064666, 9718258, -7477437, 13381418}, + FieldElement{18445390, -4202236, 14979846, 11622458, -1727110, -3582980, 23111648, -6375247, 28535282, 15779576}, + }, + { + FieldElement{30098053, 3089662, -9234387, 16662135, -21306940, 11308411, -14068454, 12021730, 9955285, -16303356}, + FieldElement{9734894, -14576830, -7473633, -9138735, 2060392, 11313496, -18426029, 9924399, 20194861, 13380996}, + FieldElement{-26378102, -7965207, -22167821, 15789297, -18055342, -6168792, -1984914, 15707771, 26342023, 10146099}, + }, + }, + { + { + FieldElement{-26016874, -219943, 21339191, -41388, 19745256, -2878700, -29637280, 2227040, 21612326, -545728}, + FieldElement{-13077387, 1184228, 23562814, -5970442, -20351244, -6348714, 25764461, 12243797, -20856566, 11649658}, + FieldElement{-10031494, 11262626, 27384172, 2271902, 26947504, -15997771, 39944, 6114064, 33514190, 2333242}, + }, + { + FieldElement{-21433588, -12421821, 8119782, 7219913, -21830522, -9016134, -6679750, -12670638, 24350578, -13450001}, + FieldElement{-4116307, -11271533, -23886186, 4843615, -30088339, 690623, -31536088, -10406836, 8317860, 12352766}, + FieldElement{18200138, -14475911, -33087759, -2696619, -23702521, -9102511, -23552096, -2287550, 20712163, 6719373}, + }, + { + FieldElement{26656208, 6075253, -7858556, 1886072, -28344043, 4262326, 11117530, -3763210, 26224235, -3297458}, + FieldElement{-17168938, -14854097, -3395676, -16369877, -19954045, 14050420, 21728352, 9493610, 18620611, -16428628}, + FieldElement{-13323321, 13325349, 11432106, 5964811, 18609221, 6062965, -5269471, -9725556, -30701573, -16479657}, + }, + { + FieldElement{-23860538, -11233159, 26961357, 1640861, -32413112, -16737940, 12248509, -5240639, 13735342, 1934062}, + FieldElement{25089769, 6742589, 17081145, -13406266, 21909293, -16067981, -15136294, -3765346, -21277997, 5473616}, + FieldElement{31883677, -7961101, 1083432, -11572403, 22828471, 13290673, -7125085, 12469656, 29111212, -5451014}, + }, + { + FieldElement{24244947, -15050407, -26262976, 2791540, -14997599, 16666678, 24367466, 6388839, -10295587, 452383}, + FieldElement{-25640782, -3417841, 5217916, 16224624, 19987036, -4082269, -24236251, -5915248, 15766062, 8407814}, + FieldElement{-20406999, 13990231, 15495425, 16395525, 5377168, 15166495, -8917023, -4388953, -8067909, 2276718}, + }, + { + FieldElement{30157918, 12924066, -17712050, 9245753, 19895028, 3368142, -23827587, 5096219, 22740376, -7303417}, + FieldElement{2041139, -14256350, 7783687, 13876377, -25946985, -13352459, 24051124, 13742383, -15637599, 13295222}, + FieldElement{33338237, -8505733, 12532113, 7977527, 9106186, -1715251, -17720195, -4612972, -4451357, -14669444}, + }, + { + FieldElement{-20045281, 5454097, -14346548, 6447146, 28862071, 1883651, -2469266, -4141880, 7770569, 9620597}, + FieldElement{23208068, 7979712, 33071466, 8149229, 1758231, -10834995, 30945528, -1694323, -33502340, -14767970}, + FieldElement{1439958, -16270480, -1079989, -793782, 4625402, 10647766, -5043801, 1220118, 30494170, -11440799}, + }, + { + FieldElement{-5037580, -13028295, -2970559, -3061767, 15640974, -6701666, -26739026, 926050, -1684339, -13333647}, + FieldElement{13908495, -3549272, 30919928, -6273825, -21521863, 7989039, 9021034, 9078865, 3353509, 4033511}, + FieldElement{-29663431, -15113610, 32259991, -344482, 24295849, -12912123, 23161163, 8839127, 27485041, 7356032}, + }, + }, + { + { + FieldElement{9661027, 705443, 11980065, -5370154, -1628543, 14661173, -6346142, 2625015, 28431036, -16771834}, + FieldElement{-23839233, -8311415, -25945511, 7480958, -17681669, -8354183, -22545972, 14150565, 15970762, 4099461}, + FieldElement{29262576, 16756590, 26350592, -8793563, 8529671, -11208050, 13617293, -9937143, 11465739, 8317062}, + }, + { + FieldElement{-25493081, -6962928, 32500200, -9419051, -23038724, -2302222, 14898637, 3848455, 20969334, -5157516}, + FieldElement{-20384450, -14347713, -18336405, 13884722, -33039454, 2842114, -21610826, -3649888, 11177095, 14989547}, + FieldElement{-24496721, -11716016, 16959896, 2278463, 12066309, 10137771, 13515641, 2581286, -28487508, 9930240}, + }, + { + FieldElement{-17751622, -2097826, 16544300, -13009300, -15914807, -14949081, 18345767, -13403753, 16291481, -5314038}, + FieldElement{-33229194, 2553288, 32678213, 9875984, 8534129, 6889387, -9676774, 6957617, 4368891, 9788741}, + FieldElement{16660756, 7281060, -10830758, 12911820, 20108584, -8101676, -21722536, -8613148, 16250552, -11111103}, + }, + { + FieldElement{-19765507, 2390526, -16551031, 14161980, 1905286, 6414907, 4689584, 10604807, -30190403, 4782747}, + FieldElement{-1354539, 14736941, -7367442, -13292886, 7710542, -14155590, -9981571, 4383045, 22546403, 437323}, + FieldElement{31665577, -12180464, -16186830, 1491339, -18368625, 3294682, 27343084, 2786261, -30633590, -14097016}, + }, + { + FieldElement{-14467279, -683715, -33374107, 7448552, 19294360, 14334329, -19690631, 2355319, -19284671, -6114373}, + FieldElement{15121312, -15796162, 6377020, -6031361, -10798111, -12957845, 18952177, 15496498, -29380133, 11754228}, + FieldElement{-2637277, -13483075, 8488727, -14303896, 12728761, -1622493, 7141596, 11724556, 22761615, -10134141}, + }, + { + FieldElement{16918416, 11729663, -18083579, 3022987, -31015732, -13339659, -28741185, -12227393, 32851222, 11717399}, + FieldElement{11166634, 7338049, -6722523, 4531520, -29468672, -7302055, 31474879, 3483633, -1193175, -4030831}, + FieldElement{-185635, 9921305, 31456609, -13536438, -12013818, 13348923, 33142652, 6546660, -19985279, -3948376}, + }, + { + FieldElement{-32460596, 11266712, -11197107, -7899103, 31703694, 3855903, -8537131, -12833048, -30772034, -15486313}, + FieldElement{-18006477, 12709068, 3991746, -6479188, -21491523, -10550425, -31135347, -16049879, 10928917, 3011958}, + FieldElement{-6957757, -15594337, 31696059, 334240, 29576716, 14796075, -30831056, -12805180, 18008031, 10258577}, + }, + { + FieldElement{-22448644, 15655569, 7018479, -4410003, -30314266, -1201591, -1853465, 1367120, 25127874, 6671743}, + FieldElement{29701166, -14373934, -10878120, 9279288, -17568, 13127210, 21382910, 11042292, 25838796, 4642684}, + FieldElement{-20430234, 14955537, -24126347, 8124619, -5369288, -5990470, 30468147, -13900640, 18423289, 4177476}, + }, + }, +} diff --git a/vendor/golang.org/x/crypto/ed25519/internal/edwards25519/edwards25519.go b/vendor/golang.org/x/crypto/ed25519/internal/edwards25519/edwards25519.go new file mode 100644 index 0000000..fd03c25 --- /dev/null +++ b/vendor/golang.org/x/crypto/ed25519/internal/edwards25519/edwards25519.go @@ -0,0 +1,1793 @@ +// Copyright 2016 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package edwards25519 + +import "encoding/binary" + +// This code is a port of the public domain, “ref10” implementation of ed25519 +// from SUPERCOP. + +// FieldElement represents an element of the field GF(2^255 - 19). An element +// t, entries t[0]...t[9], represents the integer t[0]+2^26 t[1]+2^51 t[2]+2^77 +// t[3]+2^102 t[4]+...+2^230 t[9]. Bounds on each t[i] vary depending on +// context. +type FieldElement [10]int32 + +var zero FieldElement + +func FeZero(fe *FieldElement) { + copy(fe[:], zero[:]) +} + +func FeOne(fe *FieldElement) { + FeZero(fe) + fe[0] = 1 +} + +func FeAdd(dst, a, b *FieldElement) { + dst[0] = a[0] + b[0] + dst[1] = a[1] + b[1] + dst[2] = a[2] + b[2] + dst[3] = a[3] + b[3] + dst[4] = a[4] + b[4] + dst[5] = a[5] + b[5] + dst[6] = a[6] + b[6] + dst[7] = a[7] + b[7] + dst[8] = a[8] + b[8] + dst[9] = a[9] + b[9] +} + +func FeSub(dst, a, b *FieldElement) { + dst[0] = a[0] - b[0] + dst[1] = a[1] - b[1] + dst[2] = a[2] - b[2] + dst[3] = a[3] - b[3] + dst[4] = a[4] - b[4] + dst[5] = a[5] - b[5] + dst[6] = a[6] - b[6] + dst[7] = a[7] - b[7] + dst[8] = a[8] - b[8] + dst[9] = a[9] - b[9] +} + +func FeCopy(dst, src *FieldElement) { + copy(dst[:], src[:]) +} + +// Replace (f,g) with (g,g) if b == 1; +// replace (f,g) with (f,g) if b == 0. +// +// Preconditions: b in {0,1}. +func FeCMove(f, g *FieldElement, b int32) { + b = -b + f[0] ^= b & (f[0] ^ g[0]) + f[1] ^= b & (f[1] ^ g[1]) + f[2] ^= b & (f[2] ^ g[2]) + f[3] ^= b & (f[3] ^ g[3]) + f[4] ^= b & (f[4] ^ g[4]) + f[5] ^= b & (f[5] ^ g[5]) + f[6] ^= b & (f[6] ^ g[6]) + f[7] ^= b & (f[7] ^ g[7]) + f[8] ^= b & (f[8] ^ g[8]) + f[9] ^= b & (f[9] ^ g[9]) +} + +func load3(in []byte) int64 { + var r int64 + r = int64(in[0]) + r |= int64(in[1]) << 8 + r |= int64(in[2]) << 16 + return r +} + +func load4(in []byte) int64 { + var r int64 + r = int64(in[0]) + r |= int64(in[1]) << 8 + r |= int64(in[2]) << 16 + r |= int64(in[3]) << 24 + return r +} + +func FeFromBytes(dst *FieldElement, src *[32]byte) { + h0 := load4(src[:]) + h1 := load3(src[4:]) << 6 + h2 := load3(src[7:]) << 5 + h3 := load3(src[10:]) << 3 + h4 := load3(src[13:]) << 2 + h5 := load4(src[16:]) + h6 := load3(src[20:]) << 7 + h7 := load3(src[23:]) << 5 + h8 := load3(src[26:]) << 4 + h9 := (load3(src[29:]) & 8388607) << 2 + + FeCombine(dst, h0, h1, h2, h3, h4, h5, h6, h7, h8, h9) +} + +// FeToBytes marshals h to s. +// Preconditions: +// |h| bounded by 1.1*2^25,1.1*2^24,1.1*2^25,1.1*2^24,etc. +// +// Write p=2^255-19; q=floor(h/p). +// Basic claim: q = floor(2^(-255)(h + 19 2^(-25)h9 + 2^(-1))). +// +// Proof: +// Have |h|<=p so |q|<=1 so |19^2 2^(-255) q|<1/4. +// Also have |h-2^230 h9|<2^230 so |19 2^(-255)(h-2^230 h9)|<1/4. +// +// Write y=2^(-1)-19^2 2^(-255)q-19 2^(-255)(h-2^230 h9). +// Then 0> 25 + q = (h[0] + q) >> 26 + q = (h[1] + q) >> 25 + q = (h[2] + q) >> 26 + q = (h[3] + q) >> 25 + q = (h[4] + q) >> 26 + q = (h[5] + q) >> 25 + q = (h[6] + q) >> 26 + q = (h[7] + q) >> 25 + q = (h[8] + q) >> 26 + q = (h[9] + q) >> 25 + + // Goal: Output h-(2^255-19)q, which is between 0 and 2^255-20. + h[0] += 19 * q + // Goal: Output h-2^255 q, which is between 0 and 2^255-20. + + carry[0] = h[0] >> 26 + h[1] += carry[0] + h[0] -= carry[0] << 26 + carry[1] = h[1] >> 25 + h[2] += carry[1] + h[1] -= carry[1] << 25 + carry[2] = h[2] >> 26 + h[3] += carry[2] + h[2] -= carry[2] << 26 + carry[3] = h[3] >> 25 + h[4] += carry[3] + h[3] -= carry[3] << 25 + carry[4] = h[4] >> 26 + h[5] += carry[4] + h[4] -= carry[4] << 26 + carry[5] = h[5] >> 25 + h[6] += carry[5] + h[5] -= carry[5] << 25 + carry[6] = h[6] >> 26 + h[7] += carry[6] + h[6] -= carry[6] << 26 + carry[7] = h[7] >> 25 + h[8] += carry[7] + h[7] -= carry[7] << 25 + carry[8] = h[8] >> 26 + h[9] += carry[8] + h[8] -= carry[8] << 26 + carry[9] = h[9] >> 25 + h[9] -= carry[9] << 25 + // h10 = carry9 + + // Goal: Output h[0]+...+2^255 h10-2^255 q, which is between 0 and 2^255-20. + // Have h[0]+...+2^230 h[9] between 0 and 2^255-1; + // evidently 2^255 h10-2^255 q = 0. + // Goal: Output h[0]+...+2^230 h[9]. + + s[0] = byte(h[0] >> 0) + s[1] = byte(h[0] >> 8) + s[2] = byte(h[0] >> 16) + s[3] = byte((h[0] >> 24) | (h[1] << 2)) + s[4] = byte(h[1] >> 6) + s[5] = byte(h[1] >> 14) + s[6] = byte((h[1] >> 22) | (h[2] << 3)) + s[7] = byte(h[2] >> 5) + s[8] = byte(h[2] >> 13) + s[9] = byte((h[2] >> 21) | (h[3] << 5)) + s[10] = byte(h[3] >> 3) + s[11] = byte(h[3] >> 11) + s[12] = byte((h[3] >> 19) | (h[4] << 6)) + s[13] = byte(h[4] >> 2) + s[14] = byte(h[4] >> 10) + s[15] = byte(h[4] >> 18) + s[16] = byte(h[5] >> 0) + s[17] = byte(h[5] >> 8) + s[18] = byte(h[5] >> 16) + s[19] = byte((h[5] >> 24) | (h[6] << 1)) + s[20] = byte(h[6] >> 7) + s[21] = byte(h[6] >> 15) + s[22] = byte((h[6] >> 23) | (h[7] << 3)) + s[23] = byte(h[7] >> 5) + s[24] = byte(h[7] >> 13) + s[25] = byte((h[7] >> 21) | (h[8] << 4)) + s[26] = byte(h[8] >> 4) + s[27] = byte(h[8] >> 12) + s[28] = byte((h[8] >> 20) | (h[9] << 6)) + s[29] = byte(h[9] >> 2) + s[30] = byte(h[9] >> 10) + s[31] = byte(h[9] >> 18) +} + +func FeIsNegative(f *FieldElement) byte { + var s [32]byte + FeToBytes(&s, f) + return s[0] & 1 +} + +func FeIsNonZero(f *FieldElement) int32 { + var s [32]byte + FeToBytes(&s, f) + var x uint8 + for _, b := range s { + x |= b + } + x |= x >> 4 + x |= x >> 2 + x |= x >> 1 + return int32(x & 1) +} + +// FeNeg sets h = -f +// +// Preconditions: +// |f| bounded by 1.1*2^25,1.1*2^24,1.1*2^25,1.1*2^24,etc. +// +// Postconditions: +// |h| bounded by 1.1*2^25,1.1*2^24,1.1*2^25,1.1*2^24,etc. +func FeNeg(h, f *FieldElement) { + h[0] = -f[0] + h[1] = -f[1] + h[2] = -f[2] + h[3] = -f[3] + h[4] = -f[4] + h[5] = -f[5] + h[6] = -f[6] + h[7] = -f[7] + h[8] = -f[8] + h[9] = -f[9] +} + +func FeCombine(h *FieldElement, h0, h1, h2, h3, h4, h5, h6, h7, h8, h9 int64) { + var c0, c1, c2, c3, c4, c5, c6, c7, c8, c9 int64 + + /* + |h0| <= (1.1*1.1*2^52*(1+19+19+19+19)+1.1*1.1*2^50*(38+38+38+38+38)) + i.e. |h0| <= 1.2*2^59; narrower ranges for h2, h4, h6, h8 + |h1| <= (1.1*1.1*2^51*(1+1+19+19+19+19+19+19+19+19)) + i.e. |h1| <= 1.5*2^58; narrower ranges for h3, h5, h7, h9 + */ + + c0 = (h0 + (1 << 25)) >> 26 + h1 += c0 + h0 -= c0 << 26 + c4 = (h4 + (1 << 25)) >> 26 + h5 += c4 + h4 -= c4 << 26 + /* |h0| <= 2^25 */ + /* |h4| <= 2^25 */ + /* |h1| <= 1.51*2^58 */ + /* |h5| <= 1.51*2^58 */ + + c1 = (h1 + (1 << 24)) >> 25 + h2 += c1 + h1 -= c1 << 25 + c5 = (h5 + (1 << 24)) >> 25 + h6 += c5 + h5 -= c5 << 25 + /* |h1| <= 2^24; from now on fits into int32 */ + /* |h5| <= 2^24; from now on fits into int32 */ + /* |h2| <= 1.21*2^59 */ + /* |h6| <= 1.21*2^59 */ + + c2 = (h2 + (1 << 25)) >> 26 + h3 += c2 + h2 -= c2 << 26 + c6 = (h6 + (1 << 25)) >> 26 + h7 += c6 + h6 -= c6 << 26 + /* |h2| <= 2^25; from now on fits into int32 unchanged */ + /* |h6| <= 2^25; from now on fits into int32 unchanged */ + /* |h3| <= 1.51*2^58 */ + /* |h7| <= 1.51*2^58 */ + + c3 = (h3 + (1 << 24)) >> 25 + h4 += c3 + h3 -= c3 << 25 + c7 = (h7 + (1 << 24)) >> 25 + h8 += c7 + h7 -= c7 << 25 + /* |h3| <= 2^24; from now on fits into int32 unchanged */ + /* |h7| <= 2^24; from now on fits into int32 unchanged */ + /* |h4| <= 1.52*2^33 */ + /* |h8| <= 1.52*2^33 */ + + c4 = (h4 + (1 << 25)) >> 26 + h5 += c4 + h4 -= c4 << 26 + c8 = (h8 + (1 << 25)) >> 26 + h9 += c8 + h8 -= c8 << 26 + /* |h4| <= 2^25; from now on fits into int32 unchanged */ + /* |h8| <= 2^25; from now on fits into int32 unchanged */ + /* |h5| <= 1.01*2^24 */ + /* |h9| <= 1.51*2^58 */ + + c9 = (h9 + (1 << 24)) >> 25 + h0 += c9 * 19 + h9 -= c9 << 25 + /* |h9| <= 2^24; from now on fits into int32 unchanged */ + /* |h0| <= 1.8*2^37 */ + + c0 = (h0 + (1 << 25)) >> 26 + h1 += c0 + h0 -= c0 << 26 + /* |h0| <= 2^25; from now on fits into int32 unchanged */ + /* |h1| <= 1.01*2^24 */ + + h[0] = int32(h0) + h[1] = int32(h1) + h[2] = int32(h2) + h[3] = int32(h3) + h[4] = int32(h4) + h[5] = int32(h5) + h[6] = int32(h6) + h[7] = int32(h7) + h[8] = int32(h8) + h[9] = int32(h9) +} + +// FeMul calculates h = f * g +// Can overlap h with f or g. +// +// Preconditions: +// |f| bounded by 1.1*2^26,1.1*2^25,1.1*2^26,1.1*2^25,etc. +// |g| bounded by 1.1*2^26,1.1*2^25,1.1*2^26,1.1*2^25,etc. +// +// Postconditions: +// |h| bounded by 1.1*2^25,1.1*2^24,1.1*2^25,1.1*2^24,etc. +// +// Notes on implementation strategy: +// +// Using schoolbook multiplication. +// Karatsuba would save a little in some cost models. +// +// Most multiplications by 2 and 19 are 32-bit precomputations; +// cheaper than 64-bit postcomputations. +// +// There is one remaining multiplication by 19 in the carry chain; +// one *19 precomputation can be merged into this, +// but the resulting data flow is considerably less clean. +// +// There are 12 carries below. +// 10 of them are 2-way parallelizable and vectorizable. +// Can get away with 11 carries, but then data flow is much deeper. +// +// With tighter constraints on inputs, can squeeze carries into int32. +func FeMul(h, f, g *FieldElement) { + f0 := int64(f[0]) + f1 := int64(f[1]) + f2 := int64(f[2]) + f3 := int64(f[3]) + f4 := int64(f[4]) + f5 := int64(f[5]) + f6 := int64(f[6]) + f7 := int64(f[7]) + f8 := int64(f[8]) + f9 := int64(f[9]) + + f1_2 := int64(2 * f[1]) + f3_2 := int64(2 * f[3]) + f5_2 := int64(2 * f[5]) + f7_2 := int64(2 * f[7]) + f9_2 := int64(2 * f[9]) + + g0 := int64(g[0]) + g1 := int64(g[1]) + g2 := int64(g[2]) + g3 := int64(g[3]) + g4 := int64(g[4]) + g5 := int64(g[5]) + g6 := int64(g[6]) + g7 := int64(g[7]) + g8 := int64(g[8]) + g9 := int64(g[9]) + + g1_19 := int64(19 * g[1]) /* 1.4*2^29 */ + g2_19 := int64(19 * g[2]) /* 1.4*2^30; still ok */ + g3_19 := int64(19 * g[3]) + g4_19 := int64(19 * g[4]) + g5_19 := int64(19 * g[5]) + g6_19 := int64(19 * g[6]) + g7_19 := int64(19 * g[7]) + g8_19 := int64(19 * g[8]) + g9_19 := int64(19 * g[9]) + + h0 := f0*g0 + f1_2*g9_19 + f2*g8_19 + f3_2*g7_19 + f4*g6_19 + f5_2*g5_19 + f6*g4_19 + f7_2*g3_19 + f8*g2_19 + f9_2*g1_19 + h1 := f0*g1 + f1*g0 + f2*g9_19 + f3*g8_19 + f4*g7_19 + f5*g6_19 + f6*g5_19 + f7*g4_19 + f8*g3_19 + f9*g2_19 + h2 := f0*g2 + f1_2*g1 + f2*g0 + f3_2*g9_19 + f4*g8_19 + f5_2*g7_19 + f6*g6_19 + f7_2*g5_19 + f8*g4_19 + f9_2*g3_19 + h3 := f0*g3 + f1*g2 + f2*g1 + f3*g0 + f4*g9_19 + f5*g8_19 + f6*g7_19 + f7*g6_19 + f8*g5_19 + f9*g4_19 + h4 := f0*g4 + f1_2*g3 + f2*g2 + f3_2*g1 + f4*g0 + f5_2*g9_19 + f6*g8_19 + f7_2*g7_19 + f8*g6_19 + f9_2*g5_19 + h5 := f0*g5 + f1*g4 + f2*g3 + f3*g2 + f4*g1 + f5*g0 + f6*g9_19 + f7*g8_19 + f8*g7_19 + f9*g6_19 + h6 := f0*g6 + f1_2*g5 + f2*g4 + f3_2*g3 + f4*g2 + f5_2*g1 + f6*g0 + f7_2*g9_19 + f8*g8_19 + f9_2*g7_19 + h7 := f0*g7 + f1*g6 + f2*g5 + f3*g4 + f4*g3 + f5*g2 + f6*g1 + f7*g0 + f8*g9_19 + f9*g8_19 + h8 := f0*g8 + f1_2*g7 + f2*g6 + f3_2*g5 + f4*g4 + f5_2*g3 + f6*g2 + f7_2*g1 + f8*g0 + f9_2*g9_19 + h9 := f0*g9 + f1*g8 + f2*g7 + f3*g6 + f4*g5 + f5*g4 + f6*g3 + f7*g2 + f8*g1 + f9*g0 + + FeCombine(h, h0, h1, h2, h3, h4, h5, h6, h7, h8, h9) +} + +func feSquare(f *FieldElement) (h0, h1, h2, h3, h4, h5, h6, h7, h8, h9 int64) { + f0 := int64(f[0]) + f1 := int64(f[1]) + f2 := int64(f[2]) + f3 := int64(f[3]) + f4 := int64(f[4]) + f5 := int64(f[5]) + f6 := int64(f[6]) + f7 := int64(f[7]) + f8 := int64(f[8]) + f9 := int64(f[9]) + f0_2 := int64(2 * f[0]) + f1_2 := int64(2 * f[1]) + f2_2 := int64(2 * f[2]) + f3_2 := int64(2 * f[3]) + f4_2 := int64(2 * f[4]) + f5_2 := int64(2 * f[5]) + f6_2 := int64(2 * f[6]) + f7_2 := int64(2 * f[7]) + f5_38 := 38 * f5 // 1.31*2^30 + f6_19 := 19 * f6 // 1.31*2^30 + f7_38 := 38 * f7 // 1.31*2^30 + f8_19 := 19 * f8 // 1.31*2^30 + f9_38 := 38 * f9 // 1.31*2^30 + + h0 = f0*f0 + f1_2*f9_38 + f2_2*f8_19 + f3_2*f7_38 + f4_2*f6_19 + f5*f5_38 + h1 = f0_2*f1 + f2*f9_38 + f3_2*f8_19 + f4*f7_38 + f5_2*f6_19 + h2 = f0_2*f2 + f1_2*f1 + f3_2*f9_38 + f4_2*f8_19 + f5_2*f7_38 + f6*f6_19 + h3 = f0_2*f3 + f1_2*f2 + f4*f9_38 + f5_2*f8_19 + f6*f7_38 + h4 = f0_2*f4 + f1_2*f3_2 + f2*f2 + f5_2*f9_38 + f6_2*f8_19 + f7*f7_38 + h5 = f0_2*f5 + f1_2*f4 + f2_2*f3 + f6*f9_38 + f7_2*f8_19 + h6 = f0_2*f6 + f1_2*f5_2 + f2_2*f4 + f3_2*f3 + f7_2*f9_38 + f8*f8_19 + h7 = f0_2*f7 + f1_2*f6 + f2_2*f5 + f3_2*f4 + f8*f9_38 + h8 = f0_2*f8 + f1_2*f7_2 + f2_2*f6 + f3_2*f5_2 + f4*f4 + f9*f9_38 + h9 = f0_2*f9 + f1_2*f8 + f2_2*f7 + f3_2*f6 + f4_2*f5 + + return +} + +// FeSquare calculates h = f*f. Can overlap h with f. +// +// Preconditions: +// |f| bounded by 1.1*2^26,1.1*2^25,1.1*2^26,1.1*2^25,etc. +// +// Postconditions: +// |h| bounded by 1.1*2^25,1.1*2^24,1.1*2^25,1.1*2^24,etc. +func FeSquare(h, f *FieldElement) { + h0, h1, h2, h3, h4, h5, h6, h7, h8, h9 := feSquare(f) + FeCombine(h, h0, h1, h2, h3, h4, h5, h6, h7, h8, h9) +} + +// FeSquare2 sets h = 2 * f * f +// +// Can overlap h with f. +// +// Preconditions: +// |f| bounded by 1.65*2^26,1.65*2^25,1.65*2^26,1.65*2^25,etc. +// +// Postconditions: +// |h| bounded by 1.01*2^25,1.01*2^24,1.01*2^25,1.01*2^24,etc. +// See fe_mul.c for discussion of implementation strategy. +func FeSquare2(h, f *FieldElement) { + h0, h1, h2, h3, h4, h5, h6, h7, h8, h9 := feSquare(f) + + h0 += h0 + h1 += h1 + h2 += h2 + h3 += h3 + h4 += h4 + h5 += h5 + h6 += h6 + h7 += h7 + h8 += h8 + h9 += h9 + + FeCombine(h, h0, h1, h2, h3, h4, h5, h6, h7, h8, h9) +} + +func FeInvert(out, z *FieldElement) { + var t0, t1, t2, t3 FieldElement + var i int + + FeSquare(&t0, z) // 2^1 + FeSquare(&t1, &t0) // 2^2 + for i = 1; i < 2; i++ { // 2^3 + FeSquare(&t1, &t1) + } + FeMul(&t1, z, &t1) // 2^3 + 2^0 + FeMul(&t0, &t0, &t1) // 2^3 + 2^1 + 2^0 + FeSquare(&t2, &t0) // 2^4 + 2^2 + 2^1 + FeMul(&t1, &t1, &t2) // 2^4 + 2^3 + 2^2 + 2^1 + 2^0 + FeSquare(&t2, &t1) // 5,4,3,2,1 + for i = 1; i < 5; i++ { // 9,8,7,6,5 + FeSquare(&t2, &t2) + } + FeMul(&t1, &t2, &t1) // 9,8,7,6,5,4,3,2,1,0 + FeSquare(&t2, &t1) // 10..1 + for i = 1; i < 10; i++ { // 19..10 + FeSquare(&t2, &t2) + } + FeMul(&t2, &t2, &t1) // 19..0 + FeSquare(&t3, &t2) // 20..1 + for i = 1; i < 20; i++ { // 39..20 + FeSquare(&t3, &t3) + } + FeMul(&t2, &t3, &t2) // 39..0 + FeSquare(&t2, &t2) // 40..1 + for i = 1; i < 10; i++ { // 49..10 + FeSquare(&t2, &t2) + } + FeMul(&t1, &t2, &t1) // 49..0 + FeSquare(&t2, &t1) // 50..1 + for i = 1; i < 50; i++ { // 99..50 + FeSquare(&t2, &t2) + } + FeMul(&t2, &t2, &t1) // 99..0 + FeSquare(&t3, &t2) // 100..1 + for i = 1; i < 100; i++ { // 199..100 + FeSquare(&t3, &t3) + } + FeMul(&t2, &t3, &t2) // 199..0 + FeSquare(&t2, &t2) // 200..1 + for i = 1; i < 50; i++ { // 249..50 + FeSquare(&t2, &t2) + } + FeMul(&t1, &t2, &t1) // 249..0 + FeSquare(&t1, &t1) // 250..1 + for i = 1; i < 5; i++ { // 254..5 + FeSquare(&t1, &t1) + } + FeMul(out, &t1, &t0) // 254..5,3,1,0 +} + +func fePow22523(out, z *FieldElement) { + var t0, t1, t2 FieldElement + var i int + + FeSquare(&t0, z) + for i = 1; i < 1; i++ { + FeSquare(&t0, &t0) + } + FeSquare(&t1, &t0) + for i = 1; i < 2; i++ { + FeSquare(&t1, &t1) + } + FeMul(&t1, z, &t1) + FeMul(&t0, &t0, &t1) + FeSquare(&t0, &t0) + for i = 1; i < 1; i++ { + FeSquare(&t0, &t0) + } + FeMul(&t0, &t1, &t0) + FeSquare(&t1, &t0) + for i = 1; i < 5; i++ { + FeSquare(&t1, &t1) + } + FeMul(&t0, &t1, &t0) + FeSquare(&t1, &t0) + for i = 1; i < 10; i++ { + FeSquare(&t1, &t1) + } + FeMul(&t1, &t1, &t0) + FeSquare(&t2, &t1) + for i = 1; i < 20; i++ { + FeSquare(&t2, &t2) + } + FeMul(&t1, &t2, &t1) + FeSquare(&t1, &t1) + for i = 1; i < 10; i++ { + FeSquare(&t1, &t1) + } + FeMul(&t0, &t1, &t0) + FeSquare(&t1, &t0) + for i = 1; i < 50; i++ { + FeSquare(&t1, &t1) + } + FeMul(&t1, &t1, &t0) + FeSquare(&t2, &t1) + for i = 1; i < 100; i++ { + FeSquare(&t2, &t2) + } + FeMul(&t1, &t2, &t1) + FeSquare(&t1, &t1) + for i = 1; i < 50; i++ { + FeSquare(&t1, &t1) + } + FeMul(&t0, &t1, &t0) + FeSquare(&t0, &t0) + for i = 1; i < 2; i++ { + FeSquare(&t0, &t0) + } + FeMul(out, &t0, z) +} + +// Group elements are members of the elliptic curve -x^2 + y^2 = 1 + d * x^2 * +// y^2 where d = -121665/121666. +// +// Several representations are used: +// ProjectiveGroupElement: (X:Y:Z) satisfying x=X/Z, y=Y/Z +// ExtendedGroupElement: (X:Y:Z:T) satisfying x=X/Z, y=Y/Z, XY=ZT +// CompletedGroupElement: ((X:Z),(Y:T)) satisfying x=X/Z, y=Y/T +// PreComputedGroupElement: (y+x,y-x,2dxy) + +type ProjectiveGroupElement struct { + X, Y, Z FieldElement +} + +type ExtendedGroupElement struct { + X, Y, Z, T FieldElement +} + +type CompletedGroupElement struct { + X, Y, Z, T FieldElement +} + +type PreComputedGroupElement struct { + yPlusX, yMinusX, xy2d FieldElement +} + +type CachedGroupElement struct { + yPlusX, yMinusX, Z, T2d FieldElement +} + +func (p *ProjectiveGroupElement) Zero() { + FeZero(&p.X) + FeOne(&p.Y) + FeOne(&p.Z) +} + +func (p *ProjectiveGroupElement) Double(r *CompletedGroupElement) { + var t0 FieldElement + + FeSquare(&r.X, &p.X) + FeSquare(&r.Z, &p.Y) + FeSquare2(&r.T, &p.Z) + FeAdd(&r.Y, &p.X, &p.Y) + FeSquare(&t0, &r.Y) + FeAdd(&r.Y, &r.Z, &r.X) + FeSub(&r.Z, &r.Z, &r.X) + FeSub(&r.X, &t0, &r.Y) + FeSub(&r.T, &r.T, &r.Z) +} + +func (p *ProjectiveGroupElement) ToBytes(s *[32]byte) { + var recip, x, y FieldElement + + FeInvert(&recip, &p.Z) + FeMul(&x, &p.X, &recip) + FeMul(&y, &p.Y, &recip) + FeToBytes(s, &y) + s[31] ^= FeIsNegative(&x) << 7 +} + +func (p *ExtendedGroupElement) Zero() { + FeZero(&p.X) + FeOne(&p.Y) + FeOne(&p.Z) + FeZero(&p.T) +} + +func (p *ExtendedGroupElement) Double(r *CompletedGroupElement) { + var q ProjectiveGroupElement + p.ToProjective(&q) + q.Double(r) +} + +func (p *ExtendedGroupElement) ToCached(r *CachedGroupElement) { + FeAdd(&r.yPlusX, &p.Y, &p.X) + FeSub(&r.yMinusX, &p.Y, &p.X) + FeCopy(&r.Z, &p.Z) + FeMul(&r.T2d, &p.T, &d2) +} + +func (p *ExtendedGroupElement) ToProjective(r *ProjectiveGroupElement) { + FeCopy(&r.X, &p.X) + FeCopy(&r.Y, &p.Y) + FeCopy(&r.Z, &p.Z) +} + +func (p *ExtendedGroupElement) ToBytes(s *[32]byte) { + var recip, x, y FieldElement + + FeInvert(&recip, &p.Z) + FeMul(&x, &p.X, &recip) + FeMul(&y, &p.Y, &recip) + FeToBytes(s, &y) + s[31] ^= FeIsNegative(&x) << 7 +} + +func (p *ExtendedGroupElement) FromBytes(s *[32]byte) bool { + var u, v, v3, vxx, check FieldElement + + FeFromBytes(&p.Y, s) + FeOne(&p.Z) + FeSquare(&u, &p.Y) + FeMul(&v, &u, &d) + FeSub(&u, &u, &p.Z) // y = y^2-1 + FeAdd(&v, &v, &p.Z) // v = dy^2+1 + + FeSquare(&v3, &v) + FeMul(&v3, &v3, &v) // v3 = v^3 + FeSquare(&p.X, &v3) + FeMul(&p.X, &p.X, &v) + FeMul(&p.X, &p.X, &u) // x = uv^7 + + fePow22523(&p.X, &p.X) // x = (uv^7)^((q-5)/8) + FeMul(&p.X, &p.X, &v3) + FeMul(&p.X, &p.X, &u) // x = uv^3(uv^7)^((q-5)/8) + + var tmpX, tmp2 [32]byte + + FeSquare(&vxx, &p.X) + FeMul(&vxx, &vxx, &v) + FeSub(&check, &vxx, &u) // vx^2-u + if FeIsNonZero(&check) == 1 { + FeAdd(&check, &vxx, &u) // vx^2+u + if FeIsNonZero(&check) == 1 { + return false + } + FeMul(&p.X, &p.X, &SqrtM1) + + FeToBytes(&tmpX, &p.X) + for i, v := range tmpX { + tmp2[31-i] = v + } + } + + if FeIsNegative(&p.X) != (s[31] >> 7) { + FeNeg(&p.X, &p.X) + } + + FeMul(&p.T, &p.X, &p.Y) + return true +} + +func (p *CompletedGroupElement) ToProjective(r *ProjectiveGroupElement) { + FeMul(&r.X, &p.X, &p.T) + FeMul(&r.Y, &p.Y, &p.Z) + FeMul(&r.Z, &p.Z, &p.T) +} + +func (p *CompletedGroupElement) ToExtended(r *ExtendedGroupElement) { + FeMul(&r.X, &p.X, &p.T) + FeMul(&r.Y, &p.Y, &p.Z) + FeMul(&r.Z, &p.Z, &p.T) + FeMul(&r.T, &p.X, &p.Y) +} + +func (p *PreComputedGroupElement) Zero() { + FeOne(&p.yPlusX) + FeOne(&p.yMinusX) + FeZero(&p.xy2d) +} + +func geAdd(r *CompletedGroupElement, p *ExtendedGroupElement, q *CachedGroupElement) { + var t0 FieldElement + + FeAdd(&r.X, &p.Y, &p.X) + FeSub(&r.Y, &p.Y, &p.X) + FeMul(&r.Z, &r.X, &q.yPlusX) + FeMul(&r.Y, &r.Y, &q.yMinusX) + FeMul(&r.T, &q.T2d, &p.T) + FeMul(&r.X, &p.Z, &q.Z) + FeAdd(&t0, &r.X, &r.X) + FeSub(&r.X, &r.Z, &r.Y) + FeAdd(&r.Y, &r.Z, &r.Y) + FeAdd(&r.Z, &t0, &r.T) + FeSub(&r.T, &t0, &r.T) +} + +func geSub(r *CompletedGroupElement, p *ExtendedGroupElement, q *CachedGroupElement) { + var t0 FieldElement + + FeAdd(&r.X, &p.Y, &p.X) + FeSub(&r.Y, &p.Y, &p.X) + FeMul(&r.Z, &r.X, &q.yMinusX) + FeMul(&r.Y, &r.Y, &q.yPlusX) + FeMul(&r.T, &q.T2d, &p.T) + FeMul(&r.X, &p.Z, &q.Z) + FeAdd(&t0, &r.X, &r.X) + FeSub(&r.X, &r.Z, &r.Y) + FeAdd(&r.Y, &r.Z, &r.Y) + FeSub(&r.Z, &t0, &r.T) + FeAdd(&r.T, &t0, &r.T) +} + +func geMixedAdd(r *CompletedGroupElement, p *ExtendedGroupElement, q *PreComputedGroupElement) { + var t0 FieldElement + + FeAdd(&r.X, &p.Y, &p.X) + FeSub(&r.Y, &p.Y, &p.X) + FeMul(&r.Z, &r.X, &q.yPlusX) + FeMul(&r.Y, &r.Y, &q.yMinusX) + FeMul(&r.T, &q.xy2d, &p.T) + FeAdd(&t0, &p.Z, &p.Z) + FeSub(&r.X, &r.Z, &r.Y) + FeAdd(&r.Y, &r.Z, &r.Y) + FeAdd(&r.Z, &t0, &r.T) + FeSub(&r.T, &t0, &r.T) +} + +func geMixedSub(r *CompletedGroupElement, p *ExtendedGroupElement, q *PreComputedGroupElement) { + var t0 FieldElement + + FeAdd(&r.X, &p.Y, &p.X) + FeSub(&r.Y, &p.Y, &p.X) + FeMul(&r.Z, &r.X, &q.yMinusX) + FeMul(&r.Y, &r.Y, &q.yPlusX) + FeMul(&r.T, &q.xy2d, &p.T) + FeAdd(&t0, &p.Z, &p.Z) + FeSub(&r.X, &r.Z, &r.Y) + FeAdd(&r.Y, &r.Z, &r.Y) + FeSub(&r.Z, &t0, &r.T) + FeAdd(&r.T, &t0, &r.T) +} + +func slide(r *[256]int8, a *[32]byte) { + for i := range r { + r[i] = int8(1 & (a[i>>3] >> uint(i&7))) + } + + for i := range r { + if r[i] != 0 { + for b := 1; b <= 6 && i+b < 256; b++ { + if r[i+b] != 0 { + if r[i]+(r[i+b]<= -15 { + r[i] -= r[i+b] << uint(b) + for k := i + b; k < 256; k++ { + if r[k] == 0 { + r[k] = 1 + break + } + r[k] = 0 + } + } else { + break + } + } + } + } + } +} + +// GeDoubleScalarMultVartime sets r = a*A + b*B +// where a = a[0]+256*a[1]+...+256^31 a[31]. +// and b = b[0]+256*b[1]+...+256^31 b[31]. +// B is the Ed25519 base point (x,4/5) with x positive. +func GeDoubleScalarMultVartime(r *ProjectiveGroupElement, a *[32]byte, A *ExtendedGroupElement, b *[32]byte) { + var aSlide, bSlide [256]int8 + var Ai [8]CachedGroupElement // A,3A,5A,7A,9A,11A,13A,15A + var t CompletedGroupElement + var u, A2 ExtendedGroupElement + var i int + + slide(&aSlide, a) + slide(&bSlide, b) + + A.ToCached(&Ai[0]) + A.Double(&t) + t.ToExtended(&A2) + + for i := 0; i < 7; i++ { + geAdd(&t, &A2, &Ai[i]) + t.ToExtended(&u) + u.ToCached(&Ai[i+1]) + } + + r.Zero() + + for i = 255; i >= 0; i-- { + if aSlide[i] != 0 || bSlide[i] != 0 { + break + } + } + + for ; i >= 0; i-- { + r.Double(&t) + + if aSlide[i] > 0 { + t.ToExtended(&u) + geAdd(&t, &u, &Ai[aSlide[i]/2]) + } else if aSlide[i] < 0 { + t.ToExtended(&u) + geSub(&t, &u, &Ai[(-aSlide[i])/2]) + } + + if bSlide[i] > 0 { + t.ToExtended(&u) + geMixedAdd(&t, &u, &bi[bSlide[i]/2]) + } else if bSlide[i] < 0 { + t.ToExtended(&u) + geMixedSub(&t, &u, &bi[(-bSlide[i])/2]) + } + + t.ToProjective(r) + } +} + +// equal returns 1 if b == c and 0 otherwise, assuming that b and c are +// non-negative. +func equal(b, c int32) int32 { + x := uint32(b ^ c) + x-- + return int32(x >> 31) +} + +// negative returns 1 if b < 0 and 0 otherwise. +func negative(b int32) int32 { + return (b >> 31) & 1 +} + +func PreComputedGroupElementCMove(t, u *PreComputedGroupElement, b int32) { + FeCMove(&t.yPlusX, &u.yPlusX, b) + FeCMove(&t.yMinusX, &u.yMinusX, b) + FeCMove(&t.xy2d, &u.xy2d, b) +} + +func selectPoint(t *PreComputedGroupElement, pos int32, b int32) { + var minusT PreComputedGroupElement + bNegative := negative(b) + bAbs := b - (((-bNegative) & b) << 1) + + t.Zero() + for i := int32(0); i < 8; i++ { + PreComputedGroupElementCMove(t, &base[pos][i], equal(bAbs, i+1)) + } + FeCopy(&minusT.yPlusX, &t.yMinusX) + FeCopy(&minusT.yMinusX, &t.yPlusX) + FeNeg(&minusT.xy2d, &t.xy2d) + PreComputedGroupElementCMove(t, &minusT, bNegative) +} + +// GeScalarMultBase computes h = a*B, where +// a = a[0]+256*a[1]+...+256^31 a[31] +// B is the Ed25519 base point (x,4/5) with x positive. +// +// Preconditions: +// a[31] <= 127 +func GeScalarMultBase(h *ExtendedGroupElement, a *[32]byte) { + var e [64]int8 + + for i, v := range a { + e[2*i] = int8(v & 15) + e[2*i+1] = int8((v >> 4) & 15) + } + + // each e[i] is between 0 and 15 and e[63] is between 0 and 7. + + carry := int8(0) + for i := 0; i < 63; i++ { + e[i] += carry + carry = (e[i] + 8) >> 4 + e[i] -= carry << 4 + } + e[63] += carry + // each e[i] is between -8 and 8. + + h.Zero() + var t PreComputedGroupElement + var r CompletedGroupElement + for i := int32(1); i < 64; i += 2 { + selectPoint(&t, i/2, int32(e[i])) + geMixedAdd(&r, h, &t) + r.ToExtended(h) + } + + var s ProjectiveGroupElement + + h.Double(&r) + r.ToProjective(&s) + s.Double(&r) + r.ToProjective(&s) + s.Double(&r) + r.ToProjective(&s) + s.Double(&r) + r.ToExtended(h) + + for i := int32(0); i < 64; i += 2 { + selectPoint(&t, i/2, int32(e[i])) + geMixedAdd(&r, h, &t) + r.ToExtended(h) + } +} + +// The scalars are GF(2^252 + 27742317777372353535851937790883648493). + +// Input: +// a[0]+256*a[1]+...+256^31*a[31] = a +// b[0]+256*b[1]+...+256^31*b[31] = b +// c[0]+256*c[1]+...+256^31*c[31] = c +// +// Output: +// s[0]+256*s[1]+...+256^31*s[31] = (ab+c) mod l +// where l = 2^252 + 27742317777372353535851937790883648493. +func ScMulAdd(s, a, b, c *[32]byte) { + a0 := 2097151 & load3(a[:]) + a1 := 2097151 & (load4(a[2:]) >> 5) + a2 := 2097151 & (load3(a[5:]) >> 2) + a3 := 2097151 & (load4(a[7:]) >> 7) + a4 := 2097151 & (load4(a[10:]) >> 4) + a5 := 2097151 & (load3(a[13:]) >> 1) + a6 := 2097151 & (load4(a[15:]) >> 6) + a7 := 2097151 & (load3(a[18:]) >> 3) + a8 := 2097151 & load3(a[21:]) + a9 := 2097151 & (load4(a[23:]) >> 5) + a10 := 2097151 & (load3(a[26:]) >> 2) + a11 := (load4(a[28:]) >> 7) + b0 := 2097151 & load3(b[:]) + b1 := 2097151 & (load4(b[2:]) >> 5) + b2 := 2097151 & (load3(b[5:]) >> 2) + b3 := 2097151 & (load4(b[7:]) >> 7) + b4 := 2097151 & (load4(b[10:]) >> 4) + b5 := 2097151 & (load3(b[13:]) >> 1) + b6 := 2097151 & (load4(b[15:]) >> 6) + b7 := 2097151 & (load3(b[18:]) >> 3) + b8 := 2097151 & load3(b[21:]) + b9 := 2097151 & (load4(b[23:]) >> 5) + b10 := 2097151 & (load3(b[26:]) >> 2) + b11 := (load4(b[28:]) >> 7) + c0 := 2097151 & load3(c[:]) + c1 := 2097151 & (load4(c[2:]) >> 5) + c2 := 2097151 & (load3(c[5:]) >> 2) + c3 := 2097151 & (load4(c[7:]) >> 7) + c4 := 2097151 & (load4(c[10:]) >> 4) + c5 := 2097151 & (load3(c[13:]) >> 1) + c6 := 2097151 & (load4(c[15:]) >> 6) + c7 := 2097151 & (load3(c[18:]) >> 3) + c8 := 2097151 & load3(c[21:]) + c9 := 2097151 & (load4(c[23:]) >> 5) + c10 := 2097151 & (load3(c[26:]) >> 2) + c11 := (load4(c[28:]) >> 7) + var carry [23]int64 + + s0 := c0 + a0*b0 + s1 := c1 + a0*b1 + a1*b0 + s2 := c2 + a0*b2 + a1*b1 + a2*b0 + s3 := c3 + a0*b3 + a1*b2 + a2*b1 + a3*b0 + s4 := c4 + a0*b4 + a1*b3 + a2*b2 + a3*b1 + a4*b0 + s5 := c5 + a0*b5 + a1*b4 + a2*b3 + a3*b2 + a4*b1 + a5*b0 + s6 := c6 + a0*b6 + a1*b5 + a2*b4 + a3*b3 + a4*b2 + a5*b1 + a6*b0 + s7 := c7 + a0*b7 + a1*b6 + a2*b5 + a3*b4 + a4*b3 + a5*b2 + a6*b1 + a7*b0 + s8 := c8 + a0*b8 + a1*b7 + a2*b6 + a3*b5 + a4*b4 + a5*b3 + a6*b2 + a7*b1 + a8*b0 + s9 := c9 + a0*b9 + a1*b8 + a2*b7 + a3*b6 + a4*b5 + a5*b4 + a6*b3 + a7*b2 + a8*b1 + a9*b0 + s10 := c10 + a0*b10 + a1*b9 + a2*b8 + a3*b7 + a4*b6 + a5*b5 + a6*b4 + a7*b3 + a8*b2 + a9*b1 + a10*b0 + s11 := c11 + a0*b11 + a1*b10 + a2*b9 + a3*b8 + a4*b7 + a5*b6 + a6*b5 + a7*b4 + a8*b3 + a9*b2 + a10*b1 + a11*b0 + s12 := a1*b11 + a2*b10 + a3*b9 + a4*b8 + a5*b7 + a6*b6 + a7*b5 + a8*b4 + a9*b3 + a10*b2 + a11*b1 + s13 := a2*b11 + a3*b10 + a4*b9 + a5*b8 + a6*b7 + a7*b6 + a8*b5 + a9*b4 + a10*b3 + a11*b2 + s14 := a3*b11 + a4*b10 + a5*b9 + a6*b8 + a7*b7 + a8*b6 + a9*b5 + a10*b4 + a11*b3 + s15 := a4*b11 + a5*b10 + a6*b9 + a7*b8 + a8*b7 + a9*b6 + a10*b5 + a11*b4 + s16 := a5*b11 + a6*b10 + a7*b9 + a8*b8 + a9*b7 + a10*b6 + a11*b5 + s17 := a6*b11 + a7*b10 + a8*b9 + a9*b8 + a10*b7 + a11*b6 + s18 := a7*b11 + a8*b10 + a9*b9 + a10*b8 + a11*b7 + s19 := a8*b11 + a9*b10 + a10*b9 + a11*b8 + s20 := a9*b11 + a10*b10 + a11*b9 + s21 := a10*b11 + a11*b10 + s22 := a11 * b11 + s23 := int64(0) + + carry[0] = (s0 + (1 << 20)) >> 21 + s1 += carry[0] + s0 -= carry[0] << 21 + carry[2] = (s2 + (1 << 20)) >> 21 + s3 += carry[2] + s2 -= carry[2] << 21 + carry[4] = (s4 + (1 << 20)) >> 21 + s5 += carry[4] + s4 -= carry[4] << 21 + carry[6] = (s6 + (1 << 20)) >> 21 + s7 += carry[6] + s6 -= carry[6] << 21 + carry[8] = (s8 + (1 << 20)) >> 21 + s9 += carry[8] + s8 -= carry[8] << 21 + carry[10] = (s10 + (1 << 20)) >> 21 + s11 += carry[10] + s10 -= carry[10] << 21 + carry[12] = (s12 + (1 << 20)) >> 21 + s13 += carry[12] + s12 -= carry[12] << 21 + carry[14] = (s14 + (1 << 20)) >> 21 + s15 += carry[14] + s14 -= carry[14] << 21 + carry[16] = (s16 + (1 << 20)) >> 21 + s17 += carry[16] + s16 -= carry[16] << 21 + carry[18] = (s18 + (1 << 20)) >> 21 + s19 += carry[18] + s18 -= carry[18] << 21 + carry[20] = (s20 + (1 << 20)) >> 21 + s21 += carry[20] + s20 -= carry[20] << 21 + carry[22] = (s22 + (1 << 20)) >> 21 + s23 += carry[22] + s22 -= carry[22] << 21 + + carry[1] = (s1 + (1 << 20)) >> 21 + s2 += carry[1] + s1 -= carry[1] << 21 + carry[3] = (s3 + (1 << 20)) >> 21 + s4 += carry[3] + s3 -= carry[3] << 21 + carry[5] = (s5 + (1 << 20)) >> 21 + s6 += carry[5] + s5 -= carry[5] << 21 + carry[7] = (s7 + (1 << 20)) >> 21 + s8 += carry[7] + s7 -= carry[7] << 21 + carry[9] = (s9 + (1 << 20)) >> 21 + s10 += carry[9] + s9 -= carry[9] << 21 + carry[11] = (s11 + (1 << 20)) >> 21 + s12 += carry[11] + s11 -= carry[11] << 21 + carry[13] = (s13 + (1 << 20)) >> 21 + s14 += carry[13] + s13 -= carry[13] << 21 + carry[15] = (s15 + (1 << 20)) >> 21 + s16 += carry[15] + s15 -= carry[15] << 21 + carry[17] = (s17 + (1 << 20)) >> 21 + s18 += carry[17] + s17 -= carry[17] << 21 + carry[19] = (s19 + (1 << 20)) >> 21 + s20 += carry[19] + s19 -= carry[19] << 21 + carry[21] = (s21 + (1 << 20)) >> 21 + s22 += carry[21] + s21 -= carry[21] << 21 + + s11 += s23 * 666643 + s12 += s23 * 470296 + s13 += s23 * 654183 + s14 -= s23 * 997805 + s15 += s23 * 136657 + s16 -= s23 * 683901 + s23 = 0 + + s10 += s22 * 666643 + s11 += s22 * 470296 + s12 += s22 * 654183 + s13 -= s22 * 997805 + s14 += s22 * 136657 + s15 -= s22 * 683901 + s22 = 0 + + s9 += s21 * 666643 + s10 += s21 * 470296 + s11 += s21 * 654183 + s12 -= s21 * 997805 + s13 += s21 * 136657 + s14 -= s21 * 683901 + s21 = 0 + + s8 += s20 * 666643 + s9 += s20 * 470296 + s10 += s20 * 654183 + s11 -= s20 * 997805 + s12 += s20 * 136657 + s13 -= s20 * 683901 + s20 = 0 + + s7 += s19 * 666643 + s8 += s19 * 470296 + s9 += s19 * 654183 + s10 -= s19 * 997805 + s11 += s19 * 136657 + s12 -= s19 * 683901 + s19 = 0 + + s6 += s18 * 666643 + s7 += s18 * 470296 + s8 += s18 * 654183 + s9 -= s18 * 997805 + s10 += s18 * 136657 + s11 -= s18 * 683901 + s18 = 0 + + carry[6] = (s6 + (1 << 20)) >> 21 + s7 += carry[6] + s6 -= carry[6] << 21 + carry[8] = (s8 + (1 << 20)) >> 21 + s9 += carry[8] + s8 -= carry[8] << 21 + carry[10] = (s10 + (1 << 20)) >> 21 + s11 += carry[10] + s10 -= carry[10] << 21 + carry[12] = (s12 + (1 << 20)) >> 21 + s13 += carry[12] + s12 -= carry[12] << 21 + carry[14] = (s14 + (1 << 20)) >> 21 + s15 += carry[14] + s14 -= carry[14] << 21 + carry[16] = (s16 + (1 << 20)) >> 21 + s17 += carry[16] + s16 -= carry[16] << 21 + + carry[7] = (s7 + (1 << 20)) >> 21 + s8 += carry[7] + s7 -= carry[7] << 21 + carry[9] = (s9 + (1 << 20)) >> 21 + s10 += carry[9] + s9 -= carry[9] << 21 + carry[11] = (s11 + (1 << 20)) >> 21 + s12 += carry[11] + s11 -= carry[11] << 21 + carry[13] = (s13 + (1 << 20)) >> 21 + s14 += carry[13] + s13 -= carry[13] << 21 + carry[15] = (s15 + (1 << 20)) >> 21 + s16 += carry[15] + s15 -= carry[15] << 21 + + s5 += s17 * 666643 + s6 += s17 * 470296 + s7 += s17 * 654183 + s8 -= s17 * 997805 + s9 += s17 * 136657 + s10 -= s17 * 683901 + s17 = 0 + + s4 += s16 * 666643 + s5 += s16 * 470296 + s6 += s16 * 654183 + s7 -= s16 * 997805 + s8 += s16 * 136657 + s9 -= s16 * 683901 + s16 = 0 + + s3 += s15 * 666643 + s4 += s15 * 470296 + s5 += s15 * 654183 + s6 -= s15 * 997805 + s7 += s15 * 136657 + s8 -= s15 * 683901 + s15 = 0 + + s2 += s14 * 666643 + s3 += s14 * 470296 + s4 += s14 * 654183 + s5 -= s14 * 997805 + s6 += s14 * 136657 + s7 -= s14 * 683901 + s14 = 0 + + s1 += s13 * 666643 + s2 += s13 * 470296 + s3 += s13 * 654183 + s4 -= s13 * 997805 + s5 += s13 * 136657 + s6 -= s13 * 683901 + s13 = 0 + + s0 += s12 * 666643 + s1 += s12 * 470296 + s2 += s12 * 654183 + s3 -= s12 * 997805 + s4 += s12 * 136657 + s5 -= s12 * 683901 + s12 = 0 + + carry[0] = (s0 + (1 << 20)) >> 21 + s1 += carry[0] + s0 -= carry[0] << 21 + carry[2] = (s2 + (1 << 20)) >> 21 + s3 += carry[2] + s2 -= carry[2] << 21 + carry[4] = (s4 + (1 << 20)) >> 21 + s5 += carry[4] + s4 -= carry[4] << 21 + carry[6] = (s6 + (1 << 20)) >> 21 + s7 += carry[6] + s6 -= carry[6] << 21 + carry[8] = (s8 + (1 << 20)) >> 21 + s9 += carry[8] + s8 -= carry[8] << 21 + carry[10] = (s10 + (1 << 20)) >> 21 + s11 += carry[10] + s10 -= carry[10] << 21 + + carry[1] = (s1 + (1 << 20)) >> 21 + s2 += carry[1] + s1 -= carry[1] << 21 + carry[3] = (s3 + (1 << 20)) >> 21 + s4 += carry[3] + s3 -= carry[3] << 21 + carry[5] = (s5 + (1 << 20)) >> 21 + s6 += carry[5] + s5 -= carry[5] << 21 + carry[7] = (s7 + (1 << 20)) >> 21 + s8 += carry[7] + s7 -= carry[7] << 21 + carry[9] = (s9 + (1 << 20)) >> 21 + s10 += carry[9] + s9 -= carry[9] << 21 + carry[11] = (s11 + (1 << 20)) >> 21 + s12 += carry[11] + s11 -= carry[11] << 21 + + s0 += s12 * 666643 + s1 += s12 * 470296 + s2 += s12 * 654183 + s3 -= s12 * 997805 + s4 += s12 * 136657 + s5 -= s12 * 683901 + s12 = 0 + + carry[0] = s0 >> 21 + s1 += carry[0] + s0 -= carry[0] << 21 + carry[1] = s1 >> 21 + s2 += carry[1] + s1 -= carry[1] << 21 + carry[2] = s2 >> 21 + s3 += carry[2] + s2 -= carry[2] << 21 + carry[3] = s3 >> 21 + s4 += carry[3] + s3 -= carry[3] << 21 + carry[4] = s4 >> 21 + s5 += carry[4] + s4 -= carry[4] << 21 + carry[5] = s5 >> 21 + s6 += carry[5] + s5 -= carry[5] << 21 + carry[6] = s6 >> 21 + s7 += carry[6] + s6 -= carry[6] << 21 + carry[7] = s7 >> 21 + s8 += carry[7] + s7 -= carry[7] << 21 + carry[8] = s8 >> 21 + s9 += carry[8] + s8 -= carry[8] << 21 + carry[9] = s9 >> 21 + s10 += carry[9] + s9 -= carry[9] << 21 + carry[10] = s10 >> 21 + s11 += carry[10] + s10 -= carry[10] << 21 + carry[11] = s11 >> 21 + s12 += carry[11] + s11 -= carry[11] << 21 + + s0 += s12 * 666643 + s1 += s12 * 470296 + s2 += s12 * 654183 + s3 -= s12 * 997805 + s4 += s12 * 136657 + s5 -= s12 * 683901 + s12 = 0 + + carry[0] = s0 >> 21 + s1 += carry[0] + s0 -= carry[0] << 21 + carry[1] = s1 >> 21 + s2 += carry[1] + s1 -= carry[1] << 21 + carry[2] = s2 >> 21 + s3 += carry[2] + s2 -= carry[2] << 21 + carry[3] = s3 >> 21 + s4 += carry[3] + s3 -= carry[3] << 21 + carry[4] = s4 >> 21 + s5 += carry[4] + s4 -= carry[4] << 21 + carry[5] = s5 >> 21 + s6 += carry[5] + s5 -= carry[5] << 21 + carry[6] = s6 >> 21 + s7 += carry[6] + s6 -= carry[6] << 21 + carry[7] = s7 >> 21 + s8 += carry[7] + s7 -= carry[7] << 21 + carry[8] = s8 >> 21 + s9 += carry[8] + s8 -= carry[8] << 21 + carry[9] = s9 >> 21 + s10 += carry[9] + s9 -= carry[9] << 21 + carry[10] = s10 >> 21 + s11 += carry[10] + s10 -= carry[10] << 21 + + s[0] = byte(s0 >> 0) + s[1] = byte(s0 >> 8) + s[2] = byte((s0 >> 16) | (s1 << 5)) + s[3] = byte(s1 >> 3) + s[4] = byte(s1 >> 11) + s[5] = byte((s1 >> 19) | (s2 << 2)) + s[6] = byte(s2 >> 6) + s[7] = byte((s2 >> 14) | (s3 << 7)) + s[8] = byte(s3 >> 1) + s[9] = byte(s3 >> 9) + s[10] = byte((s3 >> 17) | (s4 << 4)) + s[11] = byte(s4 >> 4) + s[12] = byte(s4 >> 12) + s[13] = byte((s4 >> 20) | (s5 << 1)) + s[14] = byte(s5 >> 7) + s[15] = byte((s5 >> 15) | (s6 << 6)) + s[16] = byte(s6 >> 2) + s[17] = byte(s6 >> 10) + s[18] = byte((s6 >> 18) | (s7 << 3)) + s[19] = byte(s7 >> 5) + s[20] = byte(s7 >> 13) + s[21] = byte(s8 >> 0) + s[22] = byte(s8 >> 8) + s[23] = byte((s8 >> 16) | (s9 << 5)) + s[24] = byte(s9 >> 3) + s[25] = byte(s9 >> 11) + s[26] = byte((s9 >> 19) | (s10 << 2)) + s[27] = byte(s10 >> 6) + s[28] = byte((s10 >> 14) | (s11 << 7)) + s[29] = byte(s11 >> 1) + s[30] = byte(s11 >> 9) + s[31] = byte(s11 >> 17) +} + +// Input: +// s[0]+256*s[1]+...+256^63*s[63] = s +// +// Output: +// s[0]+256*s[1]+...+256^31*s[31] = s mod l +// where l = 2^252 + 27742317777372353535851937790883648493. +func ScReduce(out *[32]byte, s *[64]byte) { + s0 := 2097151 & load3(s[:]) + s1 := 2097151 & (load4(s[2:]) >> 5) + s2 := 2097151 & (load3(s[5:]) >> 2) + s3 := 2097151 & (load4(s[7:]) >> 7) + s4 := 2097151 & (load4(s[10:]) >> 4) + s5 := 2097151 & (load3(s[13:]) >> 1) + s6 := 2097151 & (load4(s[15:]) >> 6) + s7 := 2097151 & (load3(s[18:]) >> 3) + s8 := 2097151 & load3(s[21:]) + s9 := 2097151 & (load4(s[23:]) >> 5) + s10 := 2097151 & (load3(s[26:]) >> 2) + s11 := 2097151 & (load4(s[28:]) >> 7) + s12 := 2097151 & (load4(s[31:]) >> 4) + s13 := 2097151 & (load3(s[34:]) >> 1) + s14 := 2097151 & (load4(s[36:]) >> 6) + s15 := 2097151 & (load3(s[39:]) >> 3) + s16 := 2097151 & load3(s[42:]) + s17 := 2097151 & (load4(s[44:]) >> 5) + s18 := 2097151 & (load3(s[47:]) >> 2) + s19 := 2097151 & (load4(s[49:]) >> 7) + s20 := 2097151 & (load4(s[52:]) >> 4) + s21 := 2097151 & (load3(s[55:]) >> 1) + s22 := 2097151 & (load4(s[57:]) >> 6) + s23 := (load4(s[60:]) >> 3) + + s11 += s23 * 666643 + s12 += s23 * 470296 + s13 += s23 * 654183 + s14 -= s23 * 997805 + s15 += s23 * 136657 + s16 -= s23 * 683901 + s23 = 0 + + s10 += s22 * 666643 + s11 += s22 * 470296 + s12 += s22 * 654183 + s13 -= s22 * 997805 + s14 += s22 * 136657 + s15 -= s22 * 683901 + s22 = 0 + + s9 += s21 * 666643 + s10 += s21 * 470296 + s11 += s21 * 654183 + s12 -= s21 * 997805 + s13 += s21 * 136657 + s14 -= s21 * 683901 + s21 = 0 + + s8 += s20 * 666643 + s9 += s20 * 470296 + s10 += s20 * 654183 + s11 -= s20 * 997805 + s12 += s20 * 136657 + s13 -= s20 * 683901 + s20 = 0 + + s7 += s19 * 666643 + s8 += s19 * 470296 + s9 += s19 * 654183 + s10 -= s19 * 997805 + s11 += s19 * 136657 + s12 -= s19 * 683901 + s19 = 0 + + s6 += s18 * 666643 + s7 += s18 * 470296 + s8 += s18 * 654183 + s9 -= s18 * 997805 + s10 += s18 * 136657 + s11 -= s18 * 683901 + s18 = 0 + + var carry [17]int64 + + carry[6] = (s6 + (1 << 20)) >> 21 + s7 += carry[6] + s6 -= carry[6] << 21 + carry[8] = (s8 + (1 << 20)) >> 21 + s9 += carry[8] + s8 -= carry[8] << 21 + carry[10] = (s10 + (1 << 20)) >> 21 + s11 += carry[10] + s10 -= carry[10] << 21 + carry[12] = (s12 + (1 << 20)) >> 21 + s13 += carry[12] + s12 -= carry[12] << 21 + carry[14] = (s14 + (1 << 20)) >> 21 + s15 += carry[14] + s14 -= carry[14] << 21 + carry[16] = (s16 + (1 << 20)) >> 21 + s17 += carry[16] + s16 -= carry[16] << 21 + + carry[7] = (s7 + (1 << 20)) >> 21 + s8 += carry[7] + s7 -= carry[7] << 21 + carry[9] = (s9 + (1 << 20)) >> 21 + s10 += carry[9] + s9 -= carry[9] << 21 + carry[11] = (s11 + (1 << 20)) >> 21 + s12 += carry[11] + s11 -= carry[11] << 21 + carry[13] = (s13 + (1 << 20)) >> 21 + s14 += carry[13] + s13 -= carry[13] << 21 + carry[15] = (s15 + (1 << 20)) >> 21 + s16 += carry[15] + s15 -= carry[15] << 21 + + s5 += s17 * 666643 + s6 += s17 * 470296 + s7 += s17 * 654183 + s8 -= s17 * 997805 + s9 += s17 * 136657 + s10 -= s17 * 683901 + s17 = 0 + + s4 += s16 * 666643 + s5 += s16 * 470296 + s6 += s16 * 654183 + s7 -= s16 * 997805 + s8 += s16 * 136657 + s9 -= s16 * 683901 + s16 = 0 + + s3 += s15 * 666643 + s4 += s15 * 470296 + s5 += s15 * 654183 + s6 -= s15 * 997805 + s7 += s15 * 136657 + s8 -= s15 * 683901 + s15 = 0 + + s2 += s14 * 666643 + s3 += s14 * 470296 + s4 += s14 * 654183 + s5 -= s14 * 997805 + s6 += s14 * 136657 + s7 -= s14 * 683901 + s14 = 0 + + s1 += s13 * 666643 + s2 += s13 * 470296 + s3 += s13 * 654183 + s4 -= s13 * 997805 + s5 += s13 * 136657 + s6 -= s13 * 683901 + s13 = 0 + + s0 += s12 * 666643 + s1 += s12 * 470296 + s2 += s12 * 654183 + s3 -= s12 * 997805 + s4 += s12 * 136657 + s5 -= s12 * 683901 + s12 = 0 + + carry[0] = (s0 + (1 << 20)) >> 21 + s1 += carry[0] + s0 -= carry[0] << 21 + carry[2] = (s2 + (1 << 20)) >> 21 + s3 += carry[2] + s2 -= carry[2] << 21 + carry[4] = (s4 + (1 << 20)) >> 21 + s5 += carry[4] + s4 -= carry[4] << 21 + carry[6] = (s6 + (1 << 20)) >> 21 + s7 += carry[6] + s6 -= carry[6] << 21 + carry[8] = (s8 + (1 << 20)) >> 21 + s9 += carry[8] + s8 -= carry[8] << 21 + carry[10] = (s10 + (1 << 20)) >> 21 + s11 += carry[10] + s10 -= carry[10] << 21 + + carry[1] = (s1 + (1 << 20)) >> 21 + s2 += carry[1] + s1 -= carry[1] << 21 + carry[3] = (s3 + (1 << 20)) >> 21 + s4 += carry[3] + s3 -= carry[3] << 21 + carry[5] = (s5 + (1 << 20)) >> 21 + s6 += carry[5] + s5 -= carry[5] << 21 + carry[7] = (s7 + (1 << 20)) >> 21 + s8 += carry[7] + s7 -= carry[7] << 21 + carry[9] = (s9 + (1 << 20)) >> 21 + s10 += carry[9] + s9 -= carry[9] << 21 + carry[11] = (s11 + (1 << 20)) >> 21 + s12 += carry[11] + s11 -= carry[11] << 21 + + s0 += s12 * 666643 + s1 += s12 * 470296 + s2 += s12 * 654183 + s3 -= s12 * 997805 + s4 += s12 * 136657 + s5 -= s12 * 683901 + s12 = 0 + + carry[0] = s0 >> 21 + s1 += carry[0] + s0 -= carry[0] << 21 + carry[1] = s1 >> 21 + s2 += carry[1] + s1 -= carry[1] << 21 + carry[2] = s2 >> 21 + s3 += carry[2] + s2 -= carry[2] << 21 + carry[3] = s3 >> 21 + s4 += carry[3] + s3 -= carry[3] << 21 + carry[4] = s4 >> 21 + s5 += carry[4] + s4 -= carry[4] << 21 + carry[5] = s5 >> 21 + s6 += carry[5] + s5 -= carry[5] << 21 + carry[6] = s6 >> 21 + s7 += carry[6] + s6 -= carry[6] << 21 + carry[7] = s7 >> 21 + s8 += carry[7] + s7 -= carry[7] << 21 + carry[8] = s8 >> 21 + s9 += carry[8] + s8 -= carry[8] << 21 + carry[9] = s9 >> 21 + s10 += carry[9] + s9 -= carry[9] << 21 + carry[10] = s10 >> 21 + s11 += carry[10] + s10 -= carry[10] << 21 + carry[11] = s11 >> 21 + s12 += carry[11] + s11 -= carry[11] << 21 + + s0 += s12 * 666643 + s1 += s12 * 470296 + s2 += s12 * 654183 + s3 -= s12 * 997805 + s4 += s12 * 136657 + s5 -= s12 * 683901 + s12 = 0 + + carry[0] = s0 >> 21 + s1 += carry[0] + s0 -= carry[0] << 21 + carry[1] = s1 >> 21 + s2 += carry[1] + s1 -= carry[1] << 21 + carry[2] = s2 >> 21 + s3 += carry[2] + s2 -= carry[2] << 21 + carry[3] = s3 >> 21 + s4 += carry[3] + s3 -= carry[3] << 21 + carry[4] = s4 >> 21 + s5 += carry[4] + s4 -= carry[4] << 21 + carry[5] = s5 >> 21 + s6 += carry[5] + s5 -= carry[5] << 21 + carry[6] = s6 >> 21 + s7 += carry[6] + s6 -= carry[6] << 21 + carry[7] = s7 >> 21 + s8 += carry[7] + s7 -= carry[7] << 21 + carry[8] = s8 >> 21 + s9 += carry[8] + s8 -= carry[8] << 21 + carry[9] = s9 >> 21 + s10 += carry[9] + s9 -= carry[9] << 21 + carry[10] = s10 >> 21 + s11 += carry[10] + s10 -= carry[10] << 21 + + out[0] = byte(s0 >> 0) + out[1] = byte(s0 >> 8) + out[2] = byte((s0 >> 16) | (s1 << 5)) + out[3] = byte(s1 >> 3) + out[4] = byte(s1 >> 11) + out[5] = byte((s1 >> 19) | (s2 << 2)) + out[6] = byte(s2 >> 6) + out[7] = byte((s2 >> 14) | (s3 << 7)) + out[8] = byte(s3 >> 1) + out[9] = byte(s3 >> 9) + out[10] = byte((s3 >> 17) | (s4 << 4)) + out[11] = byte(s4 >> 4) + out[12] = byte(s4 >> 12) + out[13] = byte((s4 >> 20) | (s5 << 1)) + out[14] = byte(s5 >> 7) + out[15] = byte((s5 >> 15) | (s6 << 6)) + out[16] = byte(s6 >> 2) + out[17] = byte(s6 >> 10) + out[18] = byte((s6 >> 18) | (s7 << 3)) + out[19] = byte(s7 >> 5) + out[20] = byte(s7 >> 13) + out[21] = byte(s8 >> 0) + out[22] = byte(s8 >> 8) + out[23] = byte((s8 >> 16) | (s9 << 5)) + out[24] = byte(s9 >> 3) + out[25] = byte(s9 >> 11) + out[26] = byte((s9 >> 19) | (s10 << 2)) + out[27] = byte(s10 >> 6) + out[28] = byte((s10 >> 14) | (s11 << 7)) + out[29] = byte(s11 >> 1) + out[30] = byte(s11 >> 9) + out[31] = byte(s11 >> 17) +} + +// order is the order of Curve25519 in little-endian form. +var order = [4]uint64{0x5812631a5cf5d3ed, 0x14def9dea2f79cd6, 0, 0x1000000000000000} + +// ScMinimal returns true if the given scalar is less than the order of the +// curve. +func ScMinimal(scalar *[32]byte) bool { + for i := 3; ; i-- { + v := binary.LittleEndian.Uint64(scalar[i*8:]) + if v > order[i] { + return false + } else if v < order[i] { + break + } else if i == 0 { + return false + } + } + + return true +} diff --git a/vendor/golang.org/x/crypto/internal/chacha20/asm_arm64.s b/vendor/golang.org/x/crypto/internal/chacha20/asm_arm64.s new file mode 100644 index 0000000..b3a16ef --- /dev/null +++ b/vendor/golang.org/x/crypto/internal/chacha20/asm_arm64.s @@ -0,0 +1,308 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build go1.11 +// +build !gccgo,!appengine + +#include "textflag.h" + +#define NUM_ROUNDS 10 + +// func xorKeyStreamVX(dst, src []byte, key *[8]uint32, nonce *[3]uint32, counter *uint32) +TEXT ·xorKeyStreamVX(SB), NOSPLIT, $0 + MOVD dst+0(FP), R1 + MOVD src+24(FP), R2 + MOVD src_len+32(FP), R3 + MOVD key+48(FP), R4 + MOVD nonce+56(FP), R6 + MOVD counter+64(FP), R7 + + MOVD $·constants(SB), R10 + MOVD $·incRotMatrix(SB), R11 + + MOVW (R7), R20 + + AND $~255, R3, R13 + ADD R2, R13, R12 // R12 for block end + AND $255, R3, R13 +loop: + MOVD $NUM_ROUNDS, R21 + VLD1 (R11), [V30.S4, V31.S4] + + // load contants + // VLD4R (R10), [V0.S4, V1.S4, V2.S4, V3.S4] + WORD $0x4D60E940 + + // load keys + // VLD4R 16(R4), [V4.S4, V5.S4, V6.S4, V7.S4] + WORD $0x4DFFE884 + // VLD4R 16(R4), [V8.S4, V9.S4, V10.S4, V11.S4] + WORD $0x4DFFE888 + SUB $32, R4 + + // load counter + nonce + // VLD1R (R7), [V12.S4] + WORD $0x4D40C8EC + + // VLD3R (R6), [V13.S4, V14.S4, V15.S4] + WORD $0x4D40E8CD + + // update counter + VADD V30.S4, V12.S4, V12.S4 + +chacha: + // V0..V3 += V4..V7 + // V12..V15 <<<= ((V12..V15 XOR V0..V3), 16) + VADD V0.S4, V4.S4, V0.S4 + VADD V1.S4, V5.S4, V1.S4 + VADD V2.S4, V6.S4, V2.S4 + VADD V3.S4, V7.S4, V3.S4 + VEOR V12.B16, V0.B16, V12.B16 + VEOR V13.B16, V1.B16, V13.B16 + VEOR V14.B16, V2.B16, V14.B16 + VEOR V15.B16, V3.B16, V15.B16 + VREV32 V12.H8, V12.H8 + VREV32 V13.H8, V13.H8 + VREV32 V14.H8, V14.H8 + VREV32 V15.H8, V15.H8 + // V8..V11 += V12..V15 + // V4..V7 <<<= ((V4..V7 XOR V8..V11), 12) + VADD V8.S4, V12.S4, V8.S4 + VADD V9.S4, V13.S4, V9.S4 + VADD V10.S4, V14.S4, V10.S4 + VADD V11.S4, V15.S4, V11.S4 + VEOR V8.B16, V4.B16, V16.B16 + VEOR V9.B16, V5.B16, V17.B16 + VEOR V10.B16, V6.B16, V18.B16 + VEOR V11.B16, V7.B16, V19.B16 + VSHL $12, V16.S4, V4.S4 + VSHL $12, V17.S4, V5.S4 + VSHL $12, V18.S4, V6.S4 + VSHL $12, V19.S4, V7.S4 + VSRI $20, V16.S4, V4.S4 + VSRI $20, V17.S4, V5.S4 + VSRI $20, V18.S4, V6.S4 + VSRI $20, V19.S4, V7.S4 + + // V0..V3 += V4..V7 + // V12..V15 <<<= ((V12..V15 XOR V0..V3), 8) + VADD V0.S4, V4.S4, V0.S4 + VADD V1.S4, V5.S4, V1.S4 + VADD V2.S4, V6.S4, V2.S4 + VADD V3.S4, V7.S4, V3.S4 + VEOR V12.B16, V0.B16, V12.B16 + VEOR V13.B16, V1.B16, V13.B16 + VEOR V14.B16, V2.B16, V14.B16 + VEOR V15.B16, V3.B16, V15.B16 + VTBL V31.B16, [V12.B16], V12.B16 + VTBL V31.B16, [V13.B16], V13.B16 + VTBL V31.B16, [V14.B16], V14.B16 + VTBL V31.B16, [V15.B16], V15.B16 + + // V8..V11 += V12..V15 + // V4..V7 <<<= ((V4..V7 XOR V8..V11), 7) + VADD V12.S4, V8.S4, V8.S4 + VADD V13.S4, V9.S4, V9.S4 + VADD V14.S4, V10.S4, V10.S4 + VADD V15.S4, V11.S4, V11.S4 + VEOR V8.B16, V4.B16, V16.B16 + VEOR V9.B16, V5.B16, V17.B16 + VEOR V10.B16, V6.B16, V18.B16 + VEOR V11.B16, V7.B16, V19.B16 + VSHL $7, V16.S4, V4.S4 + VSHL $7, V17.S4, V5.S4 + VSHL $7, V18.S4, V6.S4 + VSHL $7, V19.S4, V7.S4 + VSRI $25, V16.S4, V4.S4 + VSRI $25, V17.S4, V5.S4 + VSRI $25, V18.S4, V6.S4 + VSRI $25, V19.S4, V7.S4 + + // V0..V3 += V5..V7, V4 + // V15,V12-V14 <<<= ((V15,V12-V14 XOR V0..V3), 16) + VADD V0.S4, V5.S4, V0.S4 + VADD V1.S4, V6.S4, V1.S4 + VADD V2.S4, V7.S4, V2.S4 + VADD V3.S4, V4.S4, V3.S4 + VEOR V15.B16, V0.B16, V15.B16 + VEOR V12.B16, V1.B16, V12.B16 + VEOR V13.B16, V2.B16, V13.B16 + VEOR V14.B16, V3.B16, V14.B16 + VREV32 V12.H8, V12.H8 + VREV32 V13.H8, V13.H8 + VREV32 V14.H8, V14.H8 + VREV32 V15.H8, V15.H8 + + // V10 += V15; V5 <<<= ((V10 XOR V5), 12) + // ... + VADD V15.S4, V10.S4, V10.S4 + VADD V12.S4, V11.S4, V11.S4 + VADD V13.S4, V8.S4, V8.S4 + VADD V14.S4, V9.S4, V9.S4 + VEOR V10.B16, V5.B16, V16.B16 + VEOR V11.B16, V6.B16, V17.B16 + VEOR V8.B16, V7.B16, V18.B16 + VEOR V9.B16, V4.B16, V19.B16 + VSHL $12, V16.S4, V5.S4 + VSHL $12, V17.S4, V6.S4 + VSHL $12, V18.S4, V7.S4 + VSHL $12, V19.S4, V4.S4 + VSRI $20, V16.S4, V5.S4 + VSRI $20, V17.S4, V6.S4 + VSRI $20, V18.S4, V7.S4 + VSRI $20, V19.S4, V4.S4 + + // V0 += V5; V15 <<<= ((V0 XOR V15), 8) + // ... + VADD V5.S4, V0.S4, V0.S4 + VADD V6.S4, V1.S4, V1.S4 + VADD V7.S4, V2.S4, V2.S4 + VADD V4.S4, V3.S4, V3.S4 + VEOR V0.B16, V15.B16, V15.B16 + VEOR V1.B16, V12.B16, V12.B16 + VEOR V2.B16, V13.B16, V13.B16 + VEOR V3.B16, V14.B16, V14.B16 + VTBL V31.B16, [V12.B16], V12.B16 + VTBL V31.B16, [V13.B16], V13.B16 + VTBL V31.B16, [V14.B16], V14.B16 + VTBL V31.B16, [V15.B16], V15.B16 + + // V10 += V15; V5 <<<= ((V10 XOR V5), 7) + // ... + VADD V15.S4, V10.S4, V10.S4 + VADD V12.S4, V11.S4, V11.S4 + VADD V13.S4, V8.S4, V8.S4 + VADD V14.S4, V9.S4, V9.S4 + VEOR V10.B16, V5.B16, V16.B16 + VEOR V11.B16, V6.B16, V17.B16 + VEOR V8.B16, V7.B16, V18.B16 + VEOR V9.B16, V4.B16, V19.B16 + VSHL $7, V16.S4, V5.S4 + VSHL $7, V17.S4, V6.S4 + VSHL $7, V18.S4, V7.S4 + VSHL $7, V19.S4, V4.S4 + VSRI $25, V16.S4, V5.S4 + VSRI $25, V17.S4, V6.S4 + VSRI $25, V18.S4, V7.S4 + VSRI $25, V19.S4, V4.S4 + + SUB $1, R21 + CBNZ R21, chacha + + // VLD4R (R10), [V16.S4, V17.S4, V18.S4, V19.S4] + WORD $0x4D60E950 + + // VLD4R 16(R4), [V20.S4, V21.S4, V22.S4, V23.S4] + WORD $0x4DFFE894 + VADD V30.S4, V12.S4, V12.S4 + VADD V16.S4, V0.S4, V0.S4 + VADD V17.S4, V1.S4, V1.S4 + VADD V18.S4, V2.S4, V2.S4 + VADD V19.S4, V3.S4, V3.S4 + // VLD4R 16(R4), [V24.S4, V25.S4, V26.S4, V27.S4] + WORD $0x4DFFE898 + // restore R4 + SUB $32, R4 + + // load counter + nonce + // VLD1R (R7), [V28.S4] + WORD $0x4D40C8FC + // VLD3R (R6), [V29.S4, V30.S4, V31.S4] + WORD $0x4D40E8DD + + VADD V20.S4, V4.S4, V4.S4 + VADD V21.S4, V5.S4, V5.S4 + VADD V22.S4, V6.S4, V6.S4 + VADD V23.S4, V7.S4, V7.S4 + VADD V24.S4, V8.S4, V8.S4 + VADD V25.S4, V9.S4, V9.S4 + VADD V26.S4, V10.S4, V10.S4 + VADD V27.S4, V11.S4, V11.S4 + VADD V28.S4, V12.S4, V12.S4 + VADD V29.S4, V13.S4, V13.S4 + VADD V30.S4, V14.S4, V14.S4 + VADD V31.S4, V15.S4, V15.S4 + + VZIP1 V1.S4, V0.S4, V16.S4 + VZIP2 V1.S4, V0.S4, V17.S4 + VZIP1 V3.S4, V2.S4, V18.S4 + VZIP2 V3.S4, V2.S4, V19.S4 + VZIP1 V5.S4, V4.S4, V20.S4 + VZIP2 V5.S4, V4.S4, V21.S4 + VZIP1 V7.S4, V6.S4, V22.S4 + VZIP2 V7.S4, V6.S4, V23.S4 + VZIP1 V9.S4, V8.S4, V24.S4 + VZIP2 V9.S4, V8.S4, V25.S4 + VZIP1 V11.S4, V10.S4, V26.S4 + VZIP2 V11.S4, V10.S4, V27.S4 + VZIP1 V13.S4, V12.S4, V28.S4 + VZIP2 V13.S4, V12.S4, V29.S4 + VZIP1 V15.S4, V14.S4, V30.S4 + VZIP2 V15.S4, V14.S4, V31.S4 + VZIP1 V18.D2, V16.D2, V0.D2 + VZIP2 V18.D2, V16.D2, V4.D2 + VZIP1 V19.D2, V17.D2, V8.D2 + VZIP2 V19.D2, V17.D2, V12.D2 + VLD1.P 64(R2), [V16.B16, V17.B16, V18.B16, V19.B16] + + VZIP1 V22.D2, V20.D2, V1.D2 + VZIP2 V22.D2, V20.D2, V5.D2 + VZIP1 V23.D2, V21.D2, V9.D2 + VZIP2 V23.D2, V21.D2, V13.D2 + VLD1.P 64(R2), [V20.B16, V21.B16, V22.B16, V23.B16] + VZIP1 V26.D2, V24.D2, V2.D2 + VZIP2 V26.D2, V24.D2, V6.D2 + VZIP1 V27.D2, V25.D2, V10.D2 + VZIP2 V27.D2, V25.D2, V14.D2 + VLD1.P 64(R2), [V24.B16, V25.B16, V26.B16, V27.B16] + VZIP1 V30.D2, V28.D2, V3.D2 + VZIP2 V30.D2, V28.D2, V7.D2 + VZIP1 V31.D2, V29.D2, V11.D2 + VZIP2 V31.D2, V29.D2, V15.D2 + VLD1.P 64(R2), [V28.B16, V29.B16, V30.B16, V31.B16] + VEOR V0.B16, V16.B16, V16.B16 + VEOR V1.B16, V17.B16, V17.B16 + VEOR V2.B16, V18.B16, V18.B16 + VEOR V3.B16, V19.B16, V19.B16 + VST1.P [V16.B16, V17.B16, V18.B16, V19.B16], 64(R1) + VEOR V4.B16, V20.B16, V20.B16 + VEOR V5.B16, V21.B16, V21.B16 + VEOR V6.B16, V22.B16, V22.B16 + VEOR V7.B16, V23.B16, V23.B16 + VST1.P [V20.B16, V21.B16, V22.B16, V23.B16], 64(R1) + VEOR V8.B16, V24.B16, V24.B16 + VEOR V9.B16, V25.B16, V25.B16 + VEOR V10.B16, V26.B16, V26.B16 + VEOR V11.B16, V27.B16, V27.B16 + VST1.P [V24.B16, V25.B16, V26.B16, V27.B16], 64(R1) + VEOR V12.B16, V28.B16, V28.B16 + VEOR V13.B16, V29.B16, V29.B16 + VEOR V14.B16, V30.B16, V30.B16 + VEOR V15.B16, V31.B16, V31.B16 + VST1.P [V28.B16, V29.B16, V30.B16, V31.B16], 64(R1) + + ADD $4, R20 + MOVW R20, (R7) // update counter + + CMP R2, R12 + BGT loop + + RET + + +DATA ·constants+0x00(SB)/4, $0x61707865 +DATA ·constants+0x04(SB)/4, $0x3320646e +DATA ·constants+0x08(SB)/4, $0x79622d32 +DATA ·constants+0x0c(SB)/4, $0x6b206574 +GLOBL ·constants(SB), NOPTR|RODATA, $32 + +DATA ·incRotMatrix+0x00(SB)/4, $0x00000000 +DATA ·incRotMatrix+0x04(SB)/4, $0x00000001 +DATA ·incRotMatrix+0x08(SB)/4, $0x00000002 +DATA ·incRotMatrix+0x0c(SB)/4, $0x00000003 +DATA ·incRotMatrix+0x10(SB)/4, $0x02010003 +DATA ·incRotMatrix+0x14(SB)/4, $0x06050407 +DATA ·incRotMatrix+0x18(SB)/4, $0x0A09080B +DATA ·incRotMatrix+0x1c(SB)/4, $0x0E0D0C0F +GLOBL ·incRotMatrix(SB), NOPTR|RODATA, $32 diff --git a/vendor/golang.org/x/crypto/internal/chacha20/asm_ppc64le.s b/vendor/golang.org/x/crypto/internal/chacha20/asm_ppc64le.s new file mode 100644 index 0000000..cde3fc9 --- /dev/null +++ b/vendor/golang.org/x/crypto/internal/chacha20/asm_ppc64le.s @@ -0,0 +1,668 @@ +// Copyright 2019 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// Based on CRYPTOGAMS code with the following comment: +// # ==================================================================== +// # Written by Andy Polyakov for the OpenSSL +// # project. The module is, however, dual licensed under OpenSSL and +// # CRYPTOGAMS licenses depending on where you obtain it. For further +// # details see http://www.openssl.org/~appro/cryptogams/. +// # ==================================================================== + +// Original code can be found at the link below: +// https://github.com/dot-asm/cryptogams/commit/a60f5b50ed908e91e5c39ca79126a4a876d5d8ff + +// There are some differences between CRYPTOGAMS code and this one. The round +// loop for "_int" isn't the same as the original. Some adjustments were +// necessary because there are less vector registers available. For example, some +// X variables (r12, r13, r14, and r15) share the same register used by the +// counter. The original code uses ctr to name the counter. Here we use CNT +// because golang uses CTR as the counter register name. + +// +build ppc64le,!gccgo,!appengine + +#include "textflag.h" + +#define OUT R3 +#define INP R4 +#define LEN R5 +#define KEY R6 +#define CNT R7 + +#define TEMP R8 + +#define X0 R11 +#define X1 R12 +#define X2 R14 +#define X3 R15 +#define X4 R16 +#define X5 R17 +#define X6 R18 +#define X7 R19 +#define X8 R20 +#define X9 R21 +#define X10 R22 +#define X11 R23 +#define X12 R24 +#define X13 R25 +#define X14 R26 +#define X15 R27 + +#define CON0 X0 +#define CON1 X1 +#define CON2 X2 +#define CON3 X3 + +#define KEY0 X4 +#define KEY1 X5 +#define KEY2 X6 +#define KEY3 X7 +#define KEY4 X8 +#define KEY5 X9 +#define KEY6 X10 +#define KEY7 X11 + +#define CNT0 X12 +#define CNT1 X13 +#define CNT2 X14 +#define CNT3 X15 + +#define TMP0 R9 +#define TMP1 R10 +#define TMP2 R28 +#define TMP3 R29 + +#define CONSTS R8 + +#define A0 V0 +#define B0 V1 +#define C0 V2 +#define D0 V3 +#define A1 V4 +#define B1 V5 +#define C1 V6 +#define D1 V7 +#define A2 V8 +#define B2 V9 +#define C2 V10 +#define D2 V11 +#define T0 V12 +#define T1 V13 +#define T2 V14 + +#define K0 V15 +#define K1 V16 +#define K2 V17 +#define K3 V18 +#define K4 V19 +#define K5 V20 + +#define FOUR V21 +#define SIXTEEN V22 +#define TWENTY4 V23 +#define TWENTY V24 +#define TWELVE V25 +#define TWENTY5 V26 +#define SEVEN V27 + +#define INPPERM V28 +#define OUTPERM V29 +#define OUTMASK V30 + +#define DD0 V31 +#define DD1 SEVEN +#define DD2 T0 +#define DD3 T1 +#define DD4 T2 + +DATA ·consts+0x00(SB)/8, $0x3320646e61707865 +DATA ·consts+0x08(SB)/8, $0x6b20657479622d32 +DATA ·consts+0x10(SB)/8, $0x0000000000000001 +DATA ·consts+0x18(SB)/8, $0x0000000000000000 +DATA ·consts+0x20(SB)/8, $0x0000000000000004 +DATA ·consts+0x28(SB)/8, $0x0000000000000000 +DATA ·consts+0x30(SB)/8, $0x0a0b08090e0f0c0d +DATA ·consts+0x38(SB)/8, $0x0203000106070405 +DATA ·consts+0x40(SB)/8, $0x090a0b080d0e0f0c +DATA ·consts+0x48(SB)/8, $0x0102030005060704 +GLOBL ·consts(SB), RODATA, $80 + +//func chaCha20_ctr32_vmx(out, inp *byte, len int, key *[32]byte, counter *[16]byte) +TEXT ·chaCha20_ctr32_vmx(SB),NOSPLIT|NOFRAME,$0 + // Load the arguments inside the registers + MOVD out+0(FP), OUT + MOVD inp+8(FP), INP + MOVD len+16(FP), LEN + MOVD key+24(FP), KEY + MOVD counter+32(FP), CNT + + MOVD $·consts(SB), CONSTS // point to consts addr + + MOVD $16, X0 + MOVD $32, X1 + MOVD $48, X2 + MOVD $64, X3 + MOVD $31, X4 + MOVD $15, X5 + + // Load key + LVX (KEY)(R0), K1 + LVSR (KEY)(R0), T0 + LVX (KEY)(X0), K2 + LVX (KEY)(X4), DD0 + + // Load counter + LVX (CNT)(R0), K3 + LVSR (CNT)(R0), T1 + LVX (CNT)(X5), DD1 + + // Load constants + LVX (CONSTS)(R0), K0 + LVX (CONSTS)(X0), K5 + LVX (CONSTS)(X1), FOUR + LVX (CONSTS)(X2), SIXTEEN + LVX (CONSTS)(X3), TWENTY4 + + // Align key and counter + VPERM K2, K1, T0, K1 + VPERM DD0, K2, T0, K2 + VPERM DD1, K3, T1, K3 + + // Load counter to GPR + MOVWZ 0(CNT), CNT0 + MOVWZ 4(CNT), CNT1 + MOVWZ 8(CNT), CNT2 + MOVWZ 12(CNT), CNT3 + + // Adjust vectors for the initial state + VADDUWM K3, K5, K3 + VADDUWM K3, K5, K4 + VADDUWM K4, K5, K5 + + // Synthesized constants + VSPLTISW $-12, TWENTY + VSPLTISW $12, TWELVE + VSPLTISW $-7, TWENTY5 + + VXOR T0, T0, T0 + VSPLTISW $-1, OUTMASK + LVSR (INP)(R0), INPPERM + LVSL (OUT)(R0), OUTPERM + VPERM OUTMASK, T0, OUTPERM, OUTMASK + +loop_outer_vmx: + // Load constant + MOVD $0x61707865, CON0 + MOVD $0x3320646e, CON1 + MOVD $0x79622d32, CON2 + MOVD $0x6b206574, CON3 + + VOR K0, K0, A0 + VOR K0, K0, A1 + VOR K0, K0, A2 + VOR K1, K1, B0 + + MOVD $10, TEMP + + // Load key to GPR + MOVWZ 0(KEY), X4 + MOVWZ 4(KEY), X5 + MOVWZ 8(KEY), X6 + MOVWZ 12(KEY), X7 + VOR K1, K1, B1 + VOR K1, K1, B2 + MOVWZ 16(KEY), X8 + MOVWZ 0(CNT), X12 + MOVWZ 20(KEY), X9 + MOVWZ 4(CNT), X13 + VOR K2, K2, C0 + VOR K2, K2, C1 + MOVWZ 24(KEY), X10 + MOVWZ 8(CNT), X14 + VOR K2, K2, C2 + VOR K3, K3, D0 + MOVWZ 28(KEY), X11 + MOVWZ 12(CNT), X15 + VOR K4, K4, D1 + VOR K5, K5, D2 + + MOVD X4, TMP0 + MOVD X5, TMP1 + MOVD X6, TMP2 + MOVD X7, TMP3 + VSPLTISW $7, SEVEN + + MOVD TEMP, CTR + +loop_vmx: + // CRYPTOGAMS uses a macro to create a loop using perl. This isn't possible + // using assembly macros. Therefore, the macro expansion result was used + // in order to maintain the algorithm efficiency. + // This loop generates three keystream blocks using VMX instructions and, + // in parallel, one keystream block using scalar instructions. + ADD X4, X0, X0 + ADD X5, X1, X1 + VADDUWM A0, B0, A0 + VADDUWM A1, B1, A1 + ADD X6, X2, X2 + ADD X7, X3, X3 + VADDUWM A2, B2, A2 + VXOR D0, A0, D0 + XOR X0, X12, X12 + XOR X1, X13, X13 + VXOR D1, A1, D1 + VXOR D2, A2, D2 + XOR X2, X14, X14 + XOR X3, X15, X15 + VPERM D0, D0, SIXTEEN, D0 + VPERM D1, D1, SIXTEEN, D1 + ROTLW $16, X12, X12 + ROTLW $16, X13, X13 + VPERM D2, D2, SIXTEEN, D2 + VADDUWM C0, D0, C0 + ROTLW $16, X14, X14 + ROTLW $16, X15, X15 + VADDUWM C1, D1, C1 + VADDUWM C2, D2, C2 + ADD X12, X8, X8 + ADD X13, X9, X9 + VXOR B0, C0, T0 + VXOR B1, C1, T1 + ADD X14, X10, X10 + ADD X15, X11, X11 + VXOR B2, C2, T2 + VRLW T0, TWELVE, B0 + XOR X8, X4, X4 + XOR X9, X5, X5 + VRLW T1, TWELVE, B1 + VRLW T2, TWELVE, B2 + XOR X10, X6, X6 + XOR X11, X7, X7 + VADDUWM A0, B0, A0 + VADDUWM A1, B1, A1 + ROTLW $12, X4, X4 + ROTLW $12, X5, X5 + VADDUWM A2, B2, A2 + VXOR D0, A0, D0 + ROTLW $12, X6, X6 + ROTLW $12, X7, X7 + VXOR D1, A1, D1 + VXOR D2, A2, D2 + ADD X4, X0, X0 + ADD X5, X1, X1 + VPERM D0, D0, TWENTY4, D0 + VPERM D1, D1, TWENTY4, D1 + ADD X6, X2, X2 + ADD X7, X3, X3 + VPERM D2, D2, TWENTY4, D2 + VADDUWM C0, D0, C0 + XOR X0, X12, X12 + XOR X1, X13, X13 + VADDUWM C1, D1, C1 + VADDUWM C2, D2, C2 + XOR X2, X14, X14 + XOR X3, X15, X15 + VXOR B0, C0, T0 + VXOR B1, C1, T1 + ROTLW $8, X12, X12 + ROTLW $8, X13, X13 + VXOR B2, C2, T2 + VRLW T0, SEVEN, B0 + ROTLW $8, X14, X14 + ROTLW $8, X15, X15 + VRLW T1, SEVEN, B1 + VRLW T2, SEVEN, B2 + ADD X12, X8, X8 + ADD X13, X9, X9 + VSLDOI $8, C0, C0, C0 + VSLDOI $8, C1, C1, C1 + ADD X14, X10, X10 + ADD X15, X11, X11 + VSLDOI $8, C2, C2, C2 + VSLDOI $12, B0, B0, B0 + XOR X8, X4, X4 + XOR X9, X5, X5 + VSLDOI $12, B1, B1, B1 + VSLDOI $12, B2, B2, B2 + XOR X10, X6, X6 + XOR X11, X7, X7 + VSLDOI $4, D0, D0, D0 + VSLDOI $4, D1, D1, D1 + ROTLW $7, X4, X4 + ROTLW $7, X5, X5 + VSLDOI $4, D2, D2, D2 + VADDUWM A0, B0, A0 + ROTLW $7, X6, X6 + ROTLW $7, X7, X7 + VADDUWM A1, B1, A1 + VADDUWM A2, B2, A2 + ADD X5, X0, X0 + ADD X6, X1, X1 + VXOR D0, A0, D0 + VXOR D1, A1, D1 + ADD X7, X2, X2 + ADD X4, X3, X3 + VXOR D2, A2, D2 + VPERM D0, D0, SIXTEEN, D0 + XOR X0, X15, X15 + XOR X1, X12, X12 + VPERM D1, D1, SIXTEEN, D1 + VPERM D2, D2, SIXTEEN, D2 + XOR X2, X13, X13 + XOR X3, X14, X14 + VADDUWM C0, D0, C0 + VADDUWM C1, D1, C1 + ROTLW $16, X15, X15 + ROTLW $16, X12, X12 + VADDUWM C2, D2, C2 + VXOR B0, C0, T0 + ROTLW $16, X13, X13 + ROTLW $16, X14, X14 + VXOR B1, C1, T1 + VXOR B2, C2, T2 + ADD X15, X10, X10 + ADD X12, X11, X11 + VRLW T0, TWELVE, B0 + VRLW T1, TWELVE, B1 + ADD X13, X8, X8 + ADD X14, X9, X9 + VRLW T2, TWELVE, B2 + VADDUWM A0, B0, A0 + XOR X10, X5, X5 + XOR X11, X6, X6 + VADDUWM A1, B1, A1 + VADDUWM A2, B2, A2 + XOR X8, X7, X7 + XOR X9, X4, X4 + VXOR D0, A0, D0 + VXOR D1, A1, D1 + ROTLW $12, X5, X5 + ROTLW $12, X6, X6 + VXOR D2, A2, D2 + VPERM D0, D0, TWENTY4, D0 + ROTLW $12, X7, X7 + ROTLW $12, X4, X4 + VPERM D1, D1, TWENTY4, D1 + VPERM D2, D2, TWENTY4, D2 + ADD X5, X0, X0 + ADD X6, X1, X1 + VADDUWM C0, D0, C0 + VADDUWM C1, D1, C1 + ADD X7, X2, X2 + ADD X4, X3, X3 + VADDUWM C2, D2, C2 + VXOR B0, C0, T0 + XOR X0, X15, X15 + XOR X1, X12, X12 + VXOR B1, C1, T1 + VXOR B2, C2, T2 + XOR X2, X13, X13 + XOR X3, X14, X14 + VRLW T0, SEVEN, B0 + VRLW T1, SEVEN, B1 + ROTLW $8, X15, X15 + ROTLW $8, X12, X12 + VRLW T2, SEVEN, B2 + VSLDOI $8, C0, C0, C0 + ROTLW $8, X13, X13 + ROTLW $8, X14, X14 + VSLDOI $8, C1, C1, C1 + VSLDOI $8, C2, C2, C2 + ADD X15, X10, X10 + ADD X12, X11, X11 + VSLDOI $4, B0, B0, B0 + VSLDOI $4, B1, B1, B1 + ADD X13, X8, X8 + ADD X14, X9, X9 + VSLDOI $4, B2, B2, B2 + VSLDOI $12, D0, D0, D0 + XOR X10, X5, X5 + XOR X11, X6, X6 + VSLDOI $12, D1, D1, D1 + VSLDOI $12, D2, D2, D2 + XOR X8, X7, X7 + XOR X9, X4, X4 + ROTLW $7, X5, X5 + ROTLW $7, X6, X6 + ROTLW $7, X7, X7 + ROTLW $7, X4, X4 + BC 0x10, 0, loop_vmx + + SUB $256, LEN, LEN + + // Accumulate key block + ADD $0x61707865, X0, X0 + ADD $0x3320646e, X1, X1 + ADD $0x79622d32, X2, X2 + ADD $0x6b206574, X3, X3 + ADD TMP0, X4, X4 + ADD TMP1, X5, X5 + ADD TMP2, X6, X6 + ADD TMP3, X7, X7 + MOVWZ 16(KEY), TMP0 + MOVWZ 20(KEY), TMP1 + MOVWZ 24(KEY), TMP2 + MOVWZ 28(KEY), TMP3 + ADD TMP0, X8, X8 + ADD TMP1, X9, X9 + ADD TMP2, X10, X10 + ADD TMP3, X11, X11 + + MOVWZ 12(CNT), TMP0 + MOVWZ 8(CNT), TMP1 + MOVWZ 4(CNT), TMP2 + MOVWZ 0(CNT), TEMP + ADD TMP0, X15, X15 + ADD TMP1, X14, X14 + ADD TMP2, X13, X13 + ADD TEMP, X12, X12 + + // Accumulate key block + VADDUWM A0, K0, A0 + VADDUWM A1, K0, A1 + VADDUWM A2, K0, A2 + VADDUWM B0, K1, B0 + VADDUWM B1, K1, B1 + VADDUWM B2, K1, B2 + VADDUWM C0, K2, C0 + VADDUWM C1, K2, C1 + VADDUWM C2, K2, C2 + VADDUWM D0, K3, D0 + VADDUWM D1, K4, D1 + VADDUWM D2, K5, D2 + + // Increment counter + ADD $4, TEMP, TEMP + MOVW TEMP, 0(CNT) + + VADDUWM K3, FOUR, K3 + VADDUWM K4, FOUR, K4 + VADDUWM K5, FOUR, K5 + + // XOR the input slice (INP) with the keystream, which is stored in GPRs (X0-X3). + + // Load input (aligned or not) + MOVWZ 0(INP), TMP0 + MOVWZ 4(INP), TMP1 + MOVWZ 8(INP), TMP2 + MOVWZ 12(INP), TMP3 + + // XOR with input + XOR TMP0, X0, X0 + XOR TMP1, X1, X1 + XOR TMP2, X2, X2 + XOR TMP3, X3, X3 + MOVWZ 16(INP), TMP0 + MOVWZ 20(INP), TMP1 + MOVWZ 24(INP), TMP2 + MOVWZ 28(INP), TMP3 + XOR TMP0, X4, X4 + XOR TMP1, X5, X5 + XOR TMP2, X6, X6 + XOR TMP3, X7, X7 + MOVWZ 32(INP), TMP0 + MOVWZ 36(INP), TMP1 + MOVWZ 40(INP), TMP2 + MOVWZ 44(INP), TMP3 + XOR TMP0, X8, X8 + XOR TMP1, X9, X9 + XOR TMP2, X10, X10 + XOR TMP3, X11, X11 + MOVWZ 48(INP), TMP0 + MOVWZ 52(INP), TMP1 + MOVWZ 56(INP), TMP2 + MOVWZ 60(INP), TMP3 + XOR TMP0, X12, X12 + XOR TMP1, X13, X13 + XOR TMP2, X14, X14 + XOR TMP3, X15, X15 + + // Store output (aligned or not) + MOVW X0, 0(OUT) + MOVW X1, 4(OUT) + MOVW X2, 8(OUT) + MOVW X3, 12(OUT) + + ADD $64, INP, INP // INP points to the end of the slice for the alignment code below + + MOVW X4, 16(OUT) + MOVD $16, TMP0 + MOVW X5, 20(OUT) + MOVD $32, TMP1 + MOVW X6, 24(OUT) + MOVD $48, TMP2 + MOVW X7, 28(OUT) + MOVD $64, TMP3 + MOVW X8, 32(OUT) + MOVW X9, 36(OUT) + MOVW X10, 40(OUT) + MOVW X11, 44(OUT) + MOVW X12, 48(OUT) + MOVW X13, 52(OUT) + MOVW X14, 56(OUT) + MOVW X15, 60(OUT) + ADD $64, OUT, OUT + + // Load input + LVX (INP)(R0), DD0 + LVX (INP)(TMP0), DD1 + LVX (INP)(TMP1), DD2 + LVX (INP)(TMP2), DD3 + LVX (INP)(TMP3), DD4 + ADD $64, INP, INP + + VPERM DD1, DD0, INPPERM, DD0 // Align input + VPERM DD2, DD1, INPPERM, DD1 + VPERM DD3, DD2, INPPERM, DD2 + VPERM DD4, DD3, INPPERM, DD3 + VXOR A0, DD0, A0 // XOR with input + VXOR B0, DD1, B0 + LVX (INP)(TMP0), DD1 // Keep loading input + VXOR C0, DD2, C0 + LVX (INP)(TMP1), DD2 + VXOR D0, DD3, D0 + LVX (INP)(TMP2), DD3 + LVX (INP)(TMP3), DD0 + ADD $64, INP, INP + MOVD $63, TMP3 // 63 is not a typo + VPERM A0, A0, OUTPERM, A0 + VPERM B0, B0, OUTPERM, B0 + VPERM C0, C0, OUTPERM, C0 + VPERM D0, D0, OUTPERM, D0 + + VPERM DD1, DD4, INPPERM, DD4 // Align input + VPERM DD2, DD1, INPPERM, DD1 + VPERM DD3, DD2, INPPERM, DD2 + VPERM DD0, DD3, INPPERM, DD3 + VXOR A1, DD4, A1 + VXOR B1, DD1, B1 + LVX (INP)(TMP0), DD1 // Keep loading + VXOR C1, DD2, C1 + LVX (INP)(TMP1), DD2 + VXOR D1, DD3, D1 + LVX (INP)(TMP2), DD3 + + // Note that the LVX address is always rounded down to the nearest 16-byte + // boundary, and that it always points to at most 15 bytes beyond the end of + // the slice, so we cannot cross a page boundary. + LVX (INP)(TMP3), DD4 // Redundant in aligned case. + ADD $64, INP, INP + VPERM A1, A1, OUTPERM, A1 // Pre-misalign output + VPERM B1, B1, OUTPERM, B1 + VPERM C1, C1, OUTPERM, C1 + VPERM D1, D1, OUTPERM, D1 + + VPERM DD1, DD0, INPPERM, DD0 // Align Input + VPERM DD2, DD1, INPPERM, DD1 + VPERM DD3, DD2, INPPERM, DD2 + VPERM DD4, DD3, INPPERM, DD3 + VXOR A2, DD0, A2 + VXOR B2, DD1, B2 + VXOR C2, DD2, C2 + VXOR D2, DD3, D2 + VPERM A2, A2, OUTPERM, A2 + VPERM B2, B2, OUTPERM, B2 + VPERM C2, C2, OUTPERM, C2 + VPERM D2, D2, OUTPERM, D2 + + ANDCC $15, OUT, X1 // Is out aligned? + MOVD OUT, X0 + + VSEL A0, B0, OUTMASK, DD0 // Collect pre-misaligned output + VSEL B0, C0, OUTMASK, DD1 + VSEL C0, D0, OUTMASK, DD2 + VSEL D0, A1, OUTMASK, DD3 + VSEL A1, B1, OUTMASK, B0 + VSEL B1, C1, OUTMASK, C0 + VSEL C1, D1, OUTMASK, D0 + VSEL D1, A2, OUTMASK, A1 + VSEL A2, B2, OUTMASK, B1 + VSEL B2, C2, OUTMASK, C1 + VSEL C2, D2, OUTMASK, D1 + + STVX DD0, (OUT+TMP0) + STVX DD1, (OUT+TMP1) + STVX DD2, (OUT+TMP2) + ADD $64, OUT, OUT + STVX DD3, (OUT+R0) + STVX B0, (OUT+TMP0) + STVX C0, (OUT+TMP1) + STVX D0, (OUT+TMP2) + ADD $64, OUT, OUT + STVX A1, (OUT+R0) + STVX B1, (OUT+TMP0) + STVX C1, (OUT+TMP1) + STVX D1, (OUT+TMP2) + ADD $64, OUT, OUT + + BEQ aligned_vmx + + SUB X1, OUT, X2 // in misaligned case edges + MOVD $0, X3 // are written byte-by-byte + +unaligned_tail_vmx: + STVEBX D2, (X2+X3) + ADD $1, X3, X3 + CMPW X3, X1 + BNE unaligned_tail_vmx + SUB X1, X0, X2 + +unaligned_head_vmx: + STVEBX A0, (X2+X1) + CMPW X1, $15 + ADD $1, X1, X1 + BNE unaligned_head_vmx + + CMPU LEN, $255 // done with 256-byte block yet? + BGT loop_outer_vmx + + JMP done_vmx + +aligned_vmx: + STVX A0, (X0+R0) + CMPU LEN, $255 // done with 256-byte block yet? + BGT loop_outer_vmx + +done_vmx: + RET diff --git a/vendor/golang.org/x/crypto/internal/chacha20/chacha_arm64.go b/vendor/golang.org/x/crypto/internal/chacha20/chacha_arm64.go new file mode 100644 index 0000000..ad74e23 --- /dev/null +++ b/vendor/golang.org/x/crypto/internal/chacha20/chacha_arm64.go @@ -0,0 +1,31 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build go1.11 +// +build !gccgo + +package chacha20 + +const ( + haveAsm = true + bufSize = 256 +) + +//go:noescape +func xorKeyStreamVX(dst, src []byte, key *[8]uint32, nonce *[3]uint32, counter *uint32) + +func (c *Cipher) xorKeyStreamAsm(dst, src []byte) { + + if len(src) >= bufSize { + xorKeyStreamVX(dst, src, &c.key, &c.nonce, &c.counter) + } + + if len(src)%bufSize != 0 { + i := len(src) - len(src)%bufSize + c.buf = [bufSize]byte{} + copy(c.buf[:], src[i:]) + xorKeyStreamVX(c.buf[:], c.buf[:], &c.key, &c.nonce, &c.counter) + c.len = bufSize - copy(dst[i:], c.buf[:len(src)%bufSize]) + } +} diff --git a/vendor/golang.org/x/crypto/internal/chacha20/chacha_generic.go b/vendor/golang.org/x/crypto/internal/chacha20/chacha_generic.go new file mode 100644 index 0000000..6570847 --- /dev/null +++ b/vendor/golang.org/x/crypto/internal/chacha20/chacha_generic.go @@ -0,0 +1,264 @@ +// Copyright 2016 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// Package ChaCha20 implements the core ChaCha20 function as specified +// in https://tools.ietf.org/html/rfc7539#section-2.3. +package chacha20 + +import ( + "crypto/cipher" + "encoding/binary" + + "golang.org/x/crypto/internal/subtle" +) + +// assert that *Cipher implements cipher.Stream +var _ cipher.Stream = (*Cipher)(nil) + +// Cipher is a stateful instance of ChaCha20 using a particular key +// and nonce. A *Cipher implements the cipher.Stream interface. +type Cipher struct { + key [8]uint32 + counter uint32 // incremented after each block + nonce [3]uint32 + buf [bufSize]byte // buffer for unused keystream bytes + len int // number of unused keystream bytes at end of buf +} + +// New creates a new ChaCha20 stream cipher with the given key and nonce. +// The initial counter value is set to 0. +func New(key [8]uint32, nonce [3]uint32) *Cipher { + return &Cipher{key: key, nonce: nonce} +} + +// ChaCha20 constants spelling "expand 32-byte k" +const ( + j0 uint32 = 0x61707865 + j1 uint32 = 0x3320646e + j2 uint32 = 0x79622d32 + j3 uint32 = 0x6b206574 +) + +func quarterRound(a, b, c, d uint32) (uint32, uint32, uint32, uint32) { + a += b + d ^= a + d = (d << 16) | (d >> 16) + c += d + b ^= c + b = (b << 12) | (b >> 20) + a += b + d ^= a + d = (d << 8) | (d >> 24) + c += d + b ^= c + b = (b << 7) | (b >> 25) + return a, b, c, d +} + +// XORKeyStream XORs each byte in the given slice with a byte from the +// cipher's key stream. Dst and src must overlap entirely or not at all. +// +// If len(dst) < len(src), XORKeyStream will panic. It is acceptable +// to pass a dst bigger than src, and in that case, XORKeyStream will +// only update dst[:len(src)] and will not touch the rest of dst. +// +// Multiple calls to XORKeyStream behave as if the concatenation of +// the src buffers was passed in a single run. That is, Cipher +// maintains state and does not reset at each XORKeyStream call. +func (s *Cipher) XORKeyStream(dst, src []byte) { + if len(dst) < len(src) { + panic("chacha20: output smaller than input") + } + if subtle.InexactOverlap(dst[:len(src)], src) { + panic("chacha20: invalid buffer overlap") + } + + // xor src with buffered keystream first + if s.len != 0 { + buf := s.buf[len(s.buf)-s.len:] + if len(src) < len(buf) { + buf = buf[:len(src)] + } + td, ts := dst[:len(buf)], src[:len(buf)] // BCE hint + for i, b := range buf { + td[i] = ts[i] ^ b + } + s.len -= len(buf) + if s.len != 0 { + return + } + s.buf = [len(s.buf)]byte{} // zero the empty buffer + src = src[len(buf):] + dst = dst[len(buf):] + } + + if len(src) == 0 { + return + } + if haveAsm { + if uint64(len(src))+uint64(s.counter)*64 > (1<<38)-64 { + panic("chacha20: counter overflow") + } + s.xorKeyStreamAsm(dst, src) + return + } + + // set up a 64-byte buffer to pad out the final block if needed + // (hoisted out of the main loop to avoid spills) + rem := len(src) % 64 // length of final block + fin := len(src) - rem // index of final block + if rem > 0 { + copy(s.buf[len(s.buf)-64:], src[fin:]) + } + + // pre-calculate most of the first round + s1, s5, s9, s13 := quarterRound(j1, s.key[1], s.key[5], s.nonce[0]) + s2, s6, s10, s14 := quarterRound(j2, s.key[2], s.key[6], s.nonce[1]) + s3, s7, s11, s15 := quarterRound(j3, s.key[3], s.key[7], s.nonce[2]) + + n := len(src) + src, dst = src[:n:n], dst[:n:n] // BCE hint + for i := 0; i < n; i += 64 { + // calculate the remainder of the first round + s0, s4, s8, s12 := quarterRound(j0, s.key[0], s.key[4], s.counter) + + // execute the second round + x0, x5, x10, x15 := quarterRound(s0, s5, s10, s15) + x1, x6, x11, x12 := quarterRound(s1, s6, s11, s12) + x2, x7, x8, x13 := quarterRound(s2, s7, s8, s13) + x3, x4, x9, x14 := quarterRound(s3, s4, s9, s14) + + // execute the remaining 18 rounds + for i := 0; i < 9; i++ { + x0, x4, x8, x12 = quarterRound(x0, x4, x8, x12) + x1, x5, x9, x13 = quarterRound(x1, x5, x9, x13) + x2, x6, x10, x14 = quarterRound(x2, x6, x10, x14) + x3, x7, x11, x15 = quarterRound(x3, x7, x11, x15) + + x0, x5, x10, x15 = quarterRound(x0, x5, x10, x15) + x1, x6, x11, x12 = quarterRound(x1, x6, x11, x12) + x2, x7, x8, x13 = quarterRound(x2, x7, x8, x13) + x3, x4, x9, x14 = quarterRound(x3, x4, x9, x14) + } + + x0 += j0 + x1 += j1 + x2 += j2 + x3 += j3 + + x4 += s.key[0] + x5 += s.key[1] + x6 += s.key[2] + x7 += s.key[3] + x8 += s.key[4] + x9 += s.key[5] + x10 += s.key[6] + x11 += s.key[7] + + x12 += s.counter + x13 += s.nonce[0] + x14 += s.nonce[1] + x15 += s.nonce[2] + + // increment the counter + s.counter += 1 + if s.counter == 0 { + panic("chacha20: counter overflow") + } + + // pad to 64 bytes if needed + in, out := src[i:], dst[i:] + if i == fin { + // src[fin:] has already been copied into s.buf before + // the main loop + in, out = s.buf[len(s.buf)-64:], s.buf[len(s.buf)-64:] + } + in, out = in[:64], out[:64] // BCE hint + + // XOR the key stream with the source and write out the result + xor(out[0:], in[0:], x0) + xor(out[4:], in[4:], x1) + xor(out[8:], in[8:], x2) + xor(out[12:], in[12:], x3) + xor(out[16:], in[16:], x4) + xor(out[20:], in[20:], x5) + xor(out[24:], in[24:], x6) + xor(out[28:], in[28:], x7) + xor(out[32:], in[32:], x8) + xor(out[36:], in[36:], x9) + xor(out[40:], in[40:], x10) + xor(out[44:], in[44:], x11) + xor(out[48:], in[48:], x12) + xor(out[52:], in[52:], x13) + xor(out[56:], in[56:], x14) + xor(out[60:], in[60:], x15) + } + // copy any trailing bytes out of the buffer and into dst + if rem != 0 { + s.len = 64 - rem + copy(dst[fin:], s.buf[len(s.buf)-64:]) + } +} + +// Advance discards bytes in the key stream until the next 64 byte block +// boundary is reached and updates the counter accordingly. If the key +// stream is already at a block boundary no bytes will be discarded and +// the counter will be unchanged. +func (s *Cipher) Advance() { + s.len -= s.len % 64 + if s.len == 0 { + s.buf = [len(s.buf)]byte{} + } +} + +// XORKeyStream crypts bytes from in to out using the given key and counters. +// In and out must overlap entirely or not at all. Counter contains the raw +// ChaCha20 counter bytes (i.e. block counter followed by nonce). +func XORKeyStream(out, in []byte, counter *[16]byte, key *[32]byte) { + s := Cipher{ + key: [8]uint32{ + binary.LittleEndian.Uint32(key[0:4]), + binary.LittleEndian.Uint32(key[4:8]), + binary.LittleEndian.Uint32(key[8:12]), + binary.LittleEndian.Uint32(key[12:16]), + binary.LittleEndian.Uint32(key[16:20]), + binary.LittleEndian.Uint32(key[20:24]), + binary.LittleEndian.Uint32(key[24:28]), + binary.LittleEndian.Uint32(key[28:32]), + }, + nonce: [3]uint32{ + binary.LittleEndian.Uint32(counter[4:8]), + binary.LittleEndian.Uint32(counter[8:12]), + binary.LittleEndian.Uint32(counter[12:16]), + }, + counter: binary.LittleEndian.Uint32(counter[0:4]), + } + s.XORKeyStream(out, in) +} + +// HChaCha20 uses the ChaCha20 core to generate a derived key from a key and a +// nonce. It should only be used as part of the XChaCha20 construction. +func HChaCha20(key *[8]uint32, nonce *[4]uint32) [8]uint32 { + x0, x1, x2, x3 := j0, j1, j2, j3 + x4, x5, x6, x7 := key[0], key[1], key[2], key[3] + x8, x9, x10, x11 := key[4], key[5], key[6], key[7] + x12, x13, x14, x15 := nonce[0], nonce[1], nonce[2], nonce[3] + + for i := 0; i < 10; i++ { + x0, x4, x8, x12 = quarterRound(x0, x4, x8, x12) + x1, x5, x9, x13 = quarterRound(x1, x5, x9, x13) + x2, x6, x10, x14 = quarterRound(x2, x6, x10, x14) + x3, x7, x11, x15 = quarterRound(x3, x7, x11, x15) + + x0, x5, x10, x15 = quarterRound(x0, x5, x10, x15) + x1, x6, x11, x12 = quarterRound(x1, x6, x11, x12) + x2, x7, x8, x13 = quarterRound(x2, x7, x8, x13) + x3, x4, x9, x14 = quarterRound(x3, x4, x9, x14) + } + + var out [8]uint32 + out[0], out[1], out[2], out[3] = x0, x1, x2, x3 + out[4], out[5], out[6], out[7] = x12, x13, x14, x15 + return out +} diff --git a/vendor/golang.org/x/crypto/internal/chacha20/chacha_noasm.go b/vendor/golang.org/x/crypto/internal/chacha20/chacha_noasm.go new file mode 100644 index 0000000..bf8beba --- /dev/null +++ b/vendor/golang.org/x/crypto/internal/chacha20/chacha_noasm.go @@ -0,0 +1,16 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build !ppc64le,!arm64,!s390x arm64,!go1.11 gccgo appengine + +package chacha20 + +const ( + bufSize = 64 + haveAsm = false +) + +func (*Cipher) xorKeyStreamAsm(dst, src []byte) { + panic("not implemented") +} diff --git a/vendor/golang.org/x/crypto/internal/chacha20/chacha_ppc64le.go b/vendor/golang.org/x/crypto/internal/chacha20/chacha_ppc64le.go new file mode 100644 index 0000000..638cb5e --- /dev/null +++ b/vendor/golang.org/x/crypto/internal/chacha20/chacha_ppc64le.go @@ -0,0 +1,52 @@ +// Copyright 2019 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build ppc64le,!gccgo,!appengine + +package chacha20 + +import "encoding/binary" + +const ( + bufSize = 256 + haveAsm = true +) + +//go:noescape +func chaCha20_ctr32_vmx(out, inp *byte, len int, key *[8]uint32, counter *uint32) + +func (c *Cipher) xorKeyStreamAsm(dst, src []byte) { + if len(src) >= bufSize { + chaCha20_ctr32_vmx(&dst[0], &src[0], len(src)-len(src)%bufSize, &c.key, &c.counter) + } + if len(src)%bufSize != 0 { + chaCha20_ctr32_vmx(&c.buf[0], &c.buf[0], bufSize, &c.key, &c.counter) + start := len(src) - len(src)%bufSize + ts, td, tb := src[start:], dst[start:], c.buf[:] + // Unroll loop to XOR 32 bytes per iteration. + for i := 0; i < len(ts)-32; i += 32 { + td, tb = td[:len(ts)], tb[:len(ts)] // bounds check elimination + s0 := binary.LittleEndian.Uint64(ts[0:8]) + s1 := binary.LittleEndian.Uint64(ts[8:16]) + s2 := binary.LittleEndian.Uint64(ts[16:24]) + s3 := binary.LittleEndian.Uint64(ts[24:32]) + b0 := binary.LittleEndian.Uint64(tb[0:8]) + b1 := binary.LittleEndian.Uint64(tb[8:16]) + b2 := binary.LittleEndian.Uint64(tb[16:24]) + b3 := binary.LittleEndian.Uint64(tb[24:32]) + binary.LittleEndian.PutUint64(td[0:8], s0^b0) + binary.LittleEndian.PutUint64(td[8:16], s1^b1) + binary.LittleEndian.PutUint64(td[16:24], s2^b2) + binary.LittleEndian.PutUint64(td[24:32], s3^b3) + ts, td, tb = ts[32:], td[32:], tb[32:] + } + td, tb = td[:len(ts)], tb[:len(ts)] // bounds check elimination + for i, v := range ts { + td[i] = tb[i] ^ v + } + c.len = bufSize - (len(src) % bufSize) + + } + +} diff --git a/vendor/golang.org/x/crypto/internal/chacha20/chacha_s390x.go b/vendor/golang.org/x/crypto/internal/chacha20/chacha_s390x.go new file mode 100644 index 0000000..aad645b --- /dev/null +++ b/vendor/golang.org/x/crypto/internal/chacha20/chacha_s390x.go @@ -0,0 +1,29 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build s390x,!gccgo,!appengine + +package chacha20 + +import ( + "golang.org/x/sys/cpu" +) + +var haveAsm = cpu.S390X.HasVX + +const bufSize = 256 + +// xorKeyStreamVX is an assembly implementation of XORKeyStream. It must only +// be called when the vector facility is available. +// Implementation in asm_s390x.s. +//go:noescape +func xorKeyStreamVX(dst, src []byte, key *[8]uint32, nonce *[3]uint32, counter *uint32, buf *[256]byte, len *int) + +func (c *Cipher) xorKeyStreamAsm(dst, src []byte) { + xorKeyStreamVX(dst, src, &c.key, &c.nonce, &c.counter, &c.buf, &c.len) +} + +// EXRL targets, DO NOT CALL! +func mvcSrcToBuf() +func mvcBufToDst() diff --git a/vendor/golang.org/x/crypto/internal/chacha20/chacha_s390x.s b/vendor/golang.org/x/crypto/internal/chacha20/chacha_s390x.s new file mode 100644 index 0000000..57df404 --- /dev/null +++ b/vendor/golang.org/x/crypto/internal/chacha20/chacha_s390x.s @@ -0,0 +1,260 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build s390x,!gccgo,!appengine + +#include "go_asm.h" +#include "textflag.h" + +// This is an implementation of the ChaCha20 encryption algorithm as +// specified in RFC 7539. It uses vector instructions to compute +// 4 keystream blocks in parallel (256 bytes) which are then XORed +// with the bytes in the input slice. + +GLOBL ·constants<>(SB), RODATA|NOPTR, $32 +// BSWAP: swap bytes in each 4-byte element +DATA ·constants<>+0x00(SB)/4, $0x03020100 +DATA ·constants<>+0x04(SB)/4, $0x07060504 +DATA ·constants<>+0x08(SB)/4, $0x0b0a0908 +DATA ·constants<>+0x0c(SB)/4, $0x0f0e0d0c +// J0: [j0, j1, j2, j3] +DATA ·constants<>+0x10(SB)/4, $0x61707865 +DATA ·constants<>+0x14(SB)/4, $0x3320646e +DATA ·constants<>+0x18(SB)/4, $0x79622d32 +DATA ·constants<>+0x1c(SB)/4, $0x6b206574 + +// EXRL targets: +TEXT ·mvcSrcToBuf(SB), NOFRAME|NOSPLIT, $0 + MVC $1, (R1), (R8) + RET + +TEXT ·mvcBufToDst(SB), NOFRAME|NOSPLIT, $0 + MVC $1, (R8), (R9) + RET + +#define BSWAP V5 +#define J0 V6 +#define KEY0 V7 +#define KEY1 V8 +#define NONCE V9 +#define CTR V10 +#define M0 V11 +#define M1 V12 +#define M2 V13 +#define M3 V14 +#define INC V15 +#define X0 V16 +#define X1 V17 +#define X2 V18 +#define X3 V19 +#define X4 V20 +#define X5 V21 +#define X6 V22 +#define X7 V23 +#define X8 V24 +#define X9 V25 +#define X10 V26 +#define X11 V27 +#define X12 V28 +#define X13 V29 +#define X14 V30 +#define X15 V31 + +#define NUM_ROUNDS 20 + +#define ROUND4(a0, a1, a2, a3, b0, b1, b2, b3, c0, c1, c2, c3, d0, d1, d2, d3) \ + VAF a1, a0, a0 \ + VAF b1, b0, b0 \ + VAF c1, c0, c0 \ + VAF d1, d0, d0 \ + VX a0, a2, a2 \ + VX b0, b2, b2 \ + VX c0, c2, c2 \ + VX d0, d2, d2 \ + VERLLF $16, a2, a2 \ + VERLLF $16, b2, b2 \ + VERLLF $16, c2, c2 \ + VERLLF $16, d2, d2 \ + VAF a2, a3, a3 \ + VAF b2, b3, b3 \ + VAF c2, c3, c3 \ + VAF d2, d3, d3 \ + VX a3, a1, a1 \ + VX b3, b1, b1 \ + VX c3, c1, c1 \ + VX d3, d1, d1 \ + VERLLF $12, a1, a1 \ + VERLLF $12, b1, b1 \ + VERLLF $12, c1, c1 \ + VERLLF $12, d1, d1 \ + VAF a1, a0, a0 \ + VAF b1, b0, b0 \ + VAF c1, c0, c0 \ + VAF d1, d0, d0 \ + VX a0, a2, a2 \ + VX b0, b2, b2 \ + VX c0, c2, c2 \ + VX d0, d2, d2 \ + VERLLF $8, a2, a2 \ + VERLLF $8, b2, b2 \ + VERLLF $8, c2, c2 \ + VERLLF $8, d2, d2 \ + VAF a2, a3, a3 \ + VAF b2, b3, b3 \ + VAF c2, c3, c3 \ + VAF d2, d3, d3 \ + VX a3, a1, a1 \ + VX b3, b1, b1 \ + VX c3, c1, c1 \ + VX d3, d1, d1 \ + VERLLF $7, a1, a1 \ + VERLLF $7, b1, b1 \ + VERLLF $7, c1, c1 \ + VERLLF $7, d1, d1 + +#define PERMUTE(mask, v0, v1, v2, v3) \ + VPERM v0, v0, mask, v0 \ + VPERM v1, v1, mask, v1 \ + VPERM v2, v2, mask, v2 \ + VPERM v3, v3, mask, v3 + +#define ADDV(x, v0, v1, v2, v3) \ + VAF x, v0, v0 \ + VAF x, v1, v1 \ + VAF x, v2, v2 \ + VAF x, v3, v3 + +#define XORV(off, dst, src, v0, v1, v2, v3) \ + VLM off(src), M0, M3 \ + PERMUTE(BSWAP, v0, v1, v2, v3) \ + VX v0, M0, M0 \ + VX v1, M1, M1 \ + VX v2, M2, M2 \ + VX v3, M3, M3 \ + VSTM M0, M3, off(dst) + +#define SHUFFLE(a, b, c, d, t, u, v, w) \ + VMRHF a, c, t \ // t = {a[0], c[0], a[1], c[1]} + VMRHF b, d, u \ // u = {b[0], d[0], b[1], d[1]} + VMRLF a, c, v \ // v = {a[2], c[2], a[3], c[3]} + VMRLF b, d, w \ // w = {b[2], d[2], b[3], d[3]} + VMRHF t, u, a \ // a = {a[0], b[0], c[0], d[0]} + VMRLF t, u, b \ // b = {a[1], b[1], c[1], d[1]} + VMRHF v, w, c \ // c = {a[2], b[2], c[2], d[2]} + VMRLF v, w, d // d = {a[3], b[3], c[3], d[3]} + +// func xorKeyStreamVX(dst, src []byte, key *[8]uint32, nonce *[3]uint32, counter *uint32, buf *[256]byte, len *int) +TEXT ·xorKeyStreamVX(SB), NOSPLIT, $0 + MOVD $·constants<>(SB), R1 + MOVD dst+0(FP), R2 // R2=&dst[0] + LMG src+24(FP), R3, R4 // R3=&src[0] R4=len(src) + MOVD key+48(FP), R5 // R5=key + MOVD nonce+56(FP), R6 // R6=nonce + MOVD counter+64(FP), R7 // R7=counter + MOVD buf+72(FP), R8 // R8=buf + MOVD len+80(FP), R9 // R9=len + + // load BSWAP and J0 + VLM (R1), BSWAP, J0 + + // set up tail buffer + ADD $-1, R4, R12 + MOVBZ R12, R12 + CMPUBEQ R12, $255, aligned + MOVD R4, R1 + AND $~255, R1 + MOVD $(R3)(R1*1), R1 + EXRL $·mvcSrcToBuf(SB), R12 + MOVD $255, R0 + SUB R12, R0 + MOVD R0, (R9) // update len + +aligned: + // setup + MOVD $95, R0 + VLM (R5), KEY0, KEY1 + VLL R0, (R6), NONCE + VZERO M0 + VLEIB $7, $32, M0 + VSRLB M0, NONCE, NONCE + + // initialize counter values + VLREPF (R7), CTR + VZERO INC + VLEIF $1, $1, INC + VLEIF $2, $2, INC + VLEIF $3, $3, INC + VAF INC, CTR, CTR + VREPIF $4, INC + +chacha: + VREPF $0, J0, X0 + VREPF $1, J0, X1 + VREPF $2, J0, X2 + VREPF $3, J0, X3 + VREPF $0, KEY0, X4 + VREPF $1, KEY0, X5 + VREPF $2, KEY0, X6 + VREPF $3, KEY0, X7 + VREPF $0, KEY1, X8 + VREPF $1, KEY1, X9 + VREPF $2, KEY1, X10 + VREPF $3, KEY1, X11 + VLR CTR, X12 + VREPF $1, NONCE, X13 + VREPF $2, NONCE, X14 + VREPF $3, NONCE, X15 + + MOVD $(NUM_ROUNDS/2), R1 + +loop: + ROUND4(X0, X4, X12, X8, X1, X5, X13, X9, X2, X6, X14, X10, X3, X7, X15, X11) + ROUND4(X0, X5, X15, X10, X1, X6, X12, X11, X2, X7, X13, X8, X3, X4, X14, X9) + + ADD $-1, R1 + BNE loop + + // decrement length + ADD $-256, R4 + BLT tail + +continue: + // rearrange vectors + SHUFFLE(X0, X1, X2, X3, M0, M1, M2, M3) + ADDV(J0, X0, X1, X2, X3) + SHUFFLE(X4, X5, X6, X7, M0, M1, M2, M3) + ADDV(KEY0, X4, X5, X6, X7) + SHUFFLE(X8, X9, X10, X11, M0, M1, M2, M3) + ADDV(KEY1, X8, X9, X10, X11) + VAF CTR, X12, X12 + SHUFFLE(X12, X13, X14, X15, M0, M1, M2, M3) + ADDV(NONCE, X12, X13, X14, X15) + + // increment counters + VAF INC, CTR, CTR + + // xor keystream with plaintext + XORV(0*64, R2, R3, X0, X4, X8, X12) + XORV(1*64, R2, R3, X1, X5, X9, X13) + XORV(2*64, R2, R3, X2, X6, X10, X14) + XORV(3*64, R2, R3, X3, X7, X11, X15) + + // increment pointers + MOVD $256(R2), R2 + MOVD $256(R3), R3 + + CMPBNE R4, $0, chacha + CMPUBEQ R12, $255, return + EXRL $·mvcBufToDst(SB), R12 // len was updated during setup + +return: + VSTEF $0, CTR, (R7) + RET + +tail: + MOVD R2, R9 + MOVD R8, R2 + MOVD R8, R3 + MOVD $0, R4 + JMP continue diff --git a/vendor/golang.org/x/crypto/internal/chacha20/xor.go b/vendor/golang.org/x/crypto/internal/chacha20/xor.go new file mode 100644 index 0000000..9c5ba0b --- /dev/null +++ b/vendor/golang.org/x/crypto/internal/chacha20/xor.go @@ -0,0 +1,43 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found src the LICENSE file. + +package chacha20 + +import ( + "runtime" +) + +// Platforms that have fast unaligned 32-bit little endian accesses. +const unaligned = runtime.GOARCH == "386" || + runtime.GOARCH == "amd64" || + runtime.GOARCH == "arm64" || + runtime.GOARCH == "ppc64le" || + runtime.GOARCH == "s390x" + +// xor reads a little endian uint32 from src, XORs it with u and +// places the result in little endian byte order in dst. +func xor(dst, src []byte, u uint32) { + _, _ = src[3], dst[3] // eliminate bounds checks + if unaligned { + // The compiler should optimize this code into + // 32-bit unaligned little endian loads and stores. + // TODO: delete once the compiler does a reliably + // good job with the generic code below. + // See issue #25111 for more details. + v := uint32(src[0]) + v |= uint32(src[1]) << 8 + v |= uint32(src[2]) << 16 + v |= uint32(src[3]) << 24 + v ^= u + dst[0] = byte(v) + dst[1] = byte(v >> 8) + dst[2] = byte(v >> 16) + dst[3] = byte(v >> 24) + } else { + dst[0] = src[0] ^ byte(u) + dst[1] = src[1] ^ byte(u>>8) + dst[2] = src[2] ^ byte(u>>16) + dst[3] = src[3] ^ byte(u>>24) + } +} diff --git a/vendor/golang.org/x/crypto/internal/subtle/aliasing.go b/vendor/golang.org/x/crypto/internal/subtle/aliasing.go new file mode 100644 index 0000000..f38797b --- /dev/null +++ b/vendor/golang.org/x/crypto/internal/subtle/aliasing.go @@ -0,0 +1,32 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build !appengine + +// Package subtle implements functions that are often useful in cryptographic +// code but require careful thought to use correctly. +package subtle // import "golang.org/x/crypto/internal/subtle" + +import "unsafe" + +// AnyOverlap reports whether x and y share memory at any (not necessarily +// corresponding) index. The memory beyond the slice length is ignored. +func AnyOverlap(x, y []byte) bool { + return len(x) > 0 && len(y) > 0 && + uintptr(unsafe.Pointer(&x[0])) <= uintptr(unsafe.Pointer(&y[len(y)-1])) && + uintptr(unsafe.Pointer(&y[0])) <= uintptr(unsafe.Pointer(&x[len(x)-1])) +} + +// InexactOverlap reports whether x and y share memory at any non-corresponding +// index. The memory beyond the slice length is ignored. Note that x and y can +// have different lengths and still not have any inexact overlap. +// +// InexactOverlap can be used to implement the requirements of the crypto/cipher +// AEAD, Block, BlockMode and Stream interfaces. +func InexactOverlap(x, y []byte) bool { + if len(x) == 0 || len(y) == 0 || &x[0] == &y[0] { + return false + } + return AnyOverlap(x, y) +} diff --git a/vendor/golang.org/x/crypto/internal/subtle/aliasing_appengine.go b/vendor/golang.org/x/crypto/internal/subtle/aliasing_appengine.go new file mode 100644 index 0000000..0cc4a8a --- /dev/null +++ b/vendor/golang.org/x/crypto/internal/subtle/aliasing_appengine.go @@ -0,0 +1,35 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build appengine + +// Package subtle implements functions that are often useful in cryptographic +// code but require careful thought to use correctly. +package subtle // import "golang.org/x/crypto/internal/subtle" + +// This is the Google App Engine standard variant based on reflect +// because the unsafe package and cgo are disallowed. + +import "reflect" + +// AnyOverlap reports whether x and y share memory at any (not necessarily +// corresponding) index. The memory beyond the slice length is ignored. +func AnyOverlap(x, y []byte) bool { + return len(x) > 0 && len(y) > 0 && + reflect.ValueOf(&x[0]).Pointer() <= reflect.ValueOf(&y[len(y)-1]).Pointer() && + reflect.ValueOf(&y[0]).Pointer() <= reflect.ValueOf(&x[len(x)-1]).Pointer() +} + +// InexactOverlap reports whether x and y share memory at any non-corresponding +// index. The memory beyond the slice length is ignored. Note that x and y can +// have different lengths and still not have any inexact overlap. +// +// InexactOverlap can be used to implement the requirements of the crypto/cipher +// AEAD, Block, BlockMode and Stream interfaces. +func InexactOverlap(x, y []byte) bool { + if len(x) == 0 || len(y) == 0 || &x[0] == &y[0] { + return false + } + return AnyOverlap(x, y) +} diff --git a/vendor/golang.org/x/crypto/poly1305/mac_noasm.go b/vendor/golang.org/x/crypto/poly1305/mac_noasm.go new file mode 100644 index 0000000..a8dd589 --- /dev/null +++ b/vendor/golang.org/x/crypto/poly1305/mac_noasm.go @@ -0,0 +1,11 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build !amd64,!ppc64le gccgo appengine + +package poly1305 + +type mac struct{ macGeneric } + +func newMAC(key *[32]byte) mac { return mac{newMACGeneric(key)} } diff --git a/vendor/golang.org/x/crypto/poly1305/poly1305.go b/vendor/golang.org/x/crypto/poly1305/poly1305.go new file mode 100644 index 0000000..d076a56 --- /dev/null +++ b/vendor/golang.org/x/crypto/poly1305/poly1305.go @@ -0,0 +1,83 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// Package poly1305 implements Poly1305 one-time message authentication code as +// specified in https://cr.yp.to/mac/poly1305-20050329.pdf. +// +// Poly1305 is a fast, one-time authentication function. It is infeasible for an +// attacker to generate an authenticator for a message without the key. However, a +// key must only be used for a single message. Authenticating two different +// messages with the same key allows an attacker to forge authenticators for other +// messages with the same key. +// +// Poly1305 was originally coupled with AES in order to make Poly1305-AES. AES was +// used with a fixed key in order to generate one-time keys from an nonce. +// However, in this package AES isn't used and the one-time key is specified +// directly. +package poly1305 // import "golang.org/x/crypto/poly1305" + +import "crypto/subtle" + +// TagSize is the size, in bytes, of a poly1305 authenticator. +const TagSize = 16 + +// Verify returns true if mac is a valid authenticator for m with the given +// key. +func Verify(mac *[16]byte, m []byte, key *[32]byte) bool { + var tmp [16]byte + Sum(&tmp, m, key) + return subtle.ConstantTimeCompare(tmp[:], mac[:]) == 1 +} + +// New returns a new MAC computing an authentication +// tag of all data written to it with the given key. +// This allows writing the message progressively instead +// of passing it as a single slice. Common users should use +// the Sum function instead. +// +// The key must be unique for each message, as authenticating +// two different messages with the same key allows an attacker +// to forge messages at will. +func New(key *[32]byte) *MAC { + return &MAC{ + mac: newMAC(key), + finalized: false, + } +} + +// MAC is an io.Writer computing an authentication tag +// of the data written to it. +// +// MAC cannot be used like common hash.Hash implementations, +// because using a poly1305 key twice breaks its security. +// Therefore writing data to a running MAC after calling +// Sum causes it to panic. +type MAC struct { + mac // platform-dependent implementation + + finalized bool +} + +// Size returns the number of bytes Sum will return. +func (h *MAC) Size() int { return TagSize } + +// Write adds more data to the running message authentication code. +// It never returns an error. +// +// It must not be called after the first call of Sum. +func (h *MAC) Write(p []byte) (n int, err error) { + if h.finalized { + panic("poly1305: write to MAC after Sum") + } + return h.mac.Write(p) +} + +// Sum computes the authenticator of all data written to the +// message authentication code. +func (h *MAC) Sum(b []byte) []byte { + var mac [TagSize]byte + h.mac.Sum(&mac) + h.finalized = true + return append(b, mac[:]...) +} diff --git a/vendor/golang.org/x/crypto/poly1305/sum_amd64.go b/vendor/golang.org/x/crypto/poly1305/sum_amd64.go new file mode 100644 index 0000000..2dbf42a --- /dev/null +++ b/vendor/golang.org/x/crypto/poly1305/sum_amd64.go @@ -0,0 +1,68 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build amd64,!gccgo,!appengine + +package poly1305 + +//go:noescape +func initialize(state *[7]uint64, key *[32]byte) + +//go:noescape +func update(state *[7]uint64, msg []byte) + +//go:noescape +func finalize(tag *[TagSize]byte, state *[7]uint64) + +// Sum generates an authenticator for m using a one-time key and puts the +// 16-byte result into out. Authenticating two different messages with the same +// key allows an attacker to forge messages at will. +func Sum(out *[16]byte, m []byte, key *[32]byte) { + h := newMAC(key) + h.Write(m) + h.Sum(out) +} + +func newMAC(key *[32]byte) (h mac) { + initialize(&h.state, key) + return +} + +type mac struct { + state [7]uint64 // := uint64{ h0, h1, h2, r0, r1, pad0, pad1 } + + buffer [TagSize]byte + offset int +} + +func (h *mac) Write(p []byte) (n int, err error) { + n = len(p) + if h.offset > 0 { + remaining := TagSize - h.offset + if n < remaining { + h.offset += copy(h.buffer[h.offset:], p) + return n, nil + } + copy(h.buffer[h.offset:], p[:remaining]) + p = p[remaining:] + h.offset = 0 + update(&h.state, h.buffer[:]) + } + if nn := len(p) - (len(p) % TagSize); nn > 0 { + update(&h.state, p[:nn]) + p = p[nn:] + } + if len(p) > 0 { + h.offset += copy(h.buffer[h.offset:], p) + } + return n, nil +} + +func (h *mac) Sum(out *[16]byte) { + state := h.state + if h.offset > 0 { + update(&state, h.buffer[:h.offset]) + } + finalize(out, &state) +} diff --git a/vendor/golang.org/x/crypto/poly1305/sum_amd64.s b/vendor/golang.org/x/crypto/poly1305/sum_amd64.s new file mode 100644 index 0000000..7d600f1 --- /dev/null +++ b/vendor/golang.org/x/crypto/poly1305/sum_amd64.s @@ -0,0 +1,148 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build amd64,!gccgo,!appengine + +#include "textflag.h" + +#define POLY1305_ADD(msg, h0, h1, h2) \ + ADDQ 0(msg), h0; \ + ADCQ 8(msg), h1; \ + ADCQ $1, h2; \ + LEAQ 16(msg), msg + +#define POLY1305_MUL(h0, h1, h2, r0, r1, t0, t1, t2, t3) \ + MOVQ r0, AX; \ + MULQ h0; \ + MOVQ AX, t0; \ + MOVQ DX, t1; \ + MOVQ r0, AX; \ + MULQ h1; \ + ADDQ AX, t1; \ + ADCQ $0, DX; \ + MOVQ r0, t2; \ + IMULQ h2, t2; \ + ADDQ DX, t2; \ + \ + MOVQ r1, AX; \ + MULQ h0; \ + ADDQ AX, t1; \ + ADCQ $0, DX; \ + MOVQ DX, h0; \ + MOVQ r1, t3; \ + IMULQ h2, t3; \ + MOVQ r1, AX; \ + MULQ h1; \ + ADDQ AX, t2; \ + ADCQ DX, t3; \ + ADDQ h0, t2; \ + ADCQ $0, t3; \ + \ + MOVQ t0, h0; \ + MOVQ t1, h1; \ + MOVQ t2, h2; \ + ANDQ $3, h2; \ + MOVQ t2, t0; \ + ANDQ $0xFFFFFFFFFFFFFFFC, t0; \ + ADDQ t0, h0; \ + ADCQ t3, h1; \ + ADCQ $0, h2; \ + SHRQ $2, t3, t2; \ + SHRQ $2, t3; \ + ADDQ t2, h0; \ + ADCQ t3, h1; \ + ADCQ $0, h2 + +DATA ·poly1305Mask<>+0x00(SB)/8, $0x0FFFFFFC0FFFFFFF +DATA ·poly1305Mask<>+0x08(SB)/8, $0x0FFFFFFC0FFFFFFC +GLOBL ·poly1305Mask<>(SB), RODATA, $16 + +// func update(state *[7]uint64, msg []byte) +TEXT ·update(SB), $0-32 + MOVQ state+0(FP), DI + MOVQ msg_base+8(FP), SI + MOVQ msg_len+16(FP), R15 + + MOVQ 0(DI), R8 // h0 + MOVQ 8(DI), R9 // h1 + MOVQ 16(DI), R10 // h2 + MOVQ 24(DI), R11 // r0 + MOVQ 32(DI), R12 // r1 + + CMPQ R15, $16 + JB bytes_between_0_and_15 + +loop: + POLY1305_ADD(SI, R8, R9, R10) + +multiply: + POLY1305_MUL(R8, R9, R10, R11, R12, BX, CX, R13, R14) + SUBQ $16, R15 + CMPQ R15, $16 + JAE loop + +bytes_between_0_and_15: + TESTQ R15, R15 + JZ done + MOVQ $1, BX + XORQ CX, CX + XORQ R13, R13 + ADDQ R15, SI + +flush_buffer: + SHLQ $8, BX, CX + SHLQ $8, BX + MOVB -1(SI), R13 + XORQ R13, BX + DECQ SI + DECQ R15 + JNZ flush_buffer + + ADDQ BX, R8 + ADCQ CX, R9 + ADCQ $0, R10 + MOVQ $16, R15 + JMP multiply + +done: + MOVQ R8, 0(DI) + MOVQ R9, 8(DI) + MOVQ R10, 16(DI) + RET + +// func initialize(state *[7]uint64, key *[32]byte) +TEXT ·initialize(SB), $0-16 + MOVQ state+0(FP), DI + MOVQ key+8(FP), SI + + // state[0...7] is initialized with zero + MOVOU 0(SI), X0 + MOVOU 16(SI), X1 + MOVOU ·poly1305Mask<>(SB), X2 + PAND X2, X0 + MOVOU X0, 24(DI) + MOVOU X1, 40(DI) + RET + +// func finalize(tag *[TagSize]byte, state *[7]uint64) +TEXT ·finalize(SB), $0-16 + MOVQ tag+0(FP), DI + MOVQ state+8(FP), SI + + MOVQ 0(SI), AX + MOVQ 8(SI), BX + MOVQ 16(SI), CX + MOVQ AX, R8 + MOVQ BX, R9 + SUBQ $0xFFFFFFFFFFFFFFFB, AX + SBBQ $0xFFFFFFFFFFFFFFFF, BX + SBBQ $3, CX + CMOVQCS R8, AX + CMOVQCS R9, BX + ADDQ 40(SI), AX + ADCQ 48(SI), BX + + MOVQ AX, 0(DI) + MOVQ BX, 8(DI) + RET diff --git a/vendor/golang.org/x/crypto/poly1305/sum_arm.go b/vendor/golang.org/x/crypto/poly1305/sum_arm.go new file mode 100644 index 0000000..5dc321c --- /dev/null +++ b/vendor/golang.org/x/crypto/poly1305/sum_arm.go @@ -0,0 +1,22 @@ +// Copyright 2015 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build arm,!gccgo,!appengine,!nacl + +package poly1305 + +// This function is implemented in sum_arm.s +//go:noescape +func poly1305_auth_armv6(out *[16]byte, m *byte, mlen uint32, key *[32]byte) + +// Sum generates an authenticator for m using a one-time key and puts the +// 16-byte result into out. Authenticating two different messages with the same +// key allows an attacker to forge messages at will. +func Sum(out *[16]byte, m []byte, key *[32]byte) { + var mPtr *byte + if len(m) > 0 { + mPtr = &m[0] + } + poly1305_auth_armv6(out, mPtr, uint32(len(m)), key) +} diff --git a/vendor/golang.org/x/crypto/poly1305/sum_arm.s b/vendor/golang.org/x/crypto/poly1305/sum_arm.s new file mode 100644 index 0000000..f70b4ac --- /dev/null +++ b/vendor/golang.org/x/crypto/poly1305/sum_arm.s @@ -0,0 +1,427 @@ +// Copyright 2015 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build arm,!gccgo,!appengine,!nacl + +#include "textflag.h" + +// This code was translated into a form compatible with 5a from the public +// domain source by Andrew Moon: github.com/floodyberry/poly1305-opt/blob/master/app/extensions/poly1305. + +DATA ·poly1305_init_constants_armv6<>+0x00(SB)/4, $0x3ffffff +DATA ·poly1305_init_constants_armv6<>+0x04(SB)/4, $0x3ffff03 +DATA ·poly1305_init_constants_armv6<>+0x08(SB)/4, $0x3ffc0ff +DATA ·poly1305_init_constants_armv6<>+0x0c(SB)/4, $0x3f03fff +DATA ·poly1305_init_constants_armv6<>+0x10(SB)/4, $0x00fffff +GLOBL ·poly1305_init_constants_armv6<>(SB), 8, $20 + +// Warning: the linker may use R11 to synthesize certain instructions. Please +// take care and verify that no synthetic instructions use it. + +TEXT poly1305_init_ext_armv6<>(SB), NOSPLIT, $0 + // Needs 16 bytes of stack and 64 bytes of space pointed to by R0. (It + // might look like it's only 60 bytes of space but the final four bytes + // will be written by another function.) We need to skip over four + // bytes of stack because that's saving the value of 'g'. + ADD $4, R13, R8 + MOVM.IB [R4-R7], (R8) + MOVM.IA.W (R1), [R2-R5] + MOVW $·poly1305_init_constants_armv6<>(SB), R7 + MOVW R2, R8 + MOVW R2>>26, R9 + MOVW R3>>20, g + MOVW R4>>14, R11 + MOVW R5>>8, R12 + ORR R3<<6, R9, R9 + ORR R4<<12, g, g + ORR R5<<18, R11, R11 + MOVM.IA (R7), [R2-R6] + AND R8, R2, R2 + AND R9, R3, R3 + AND g, R4, R4 + AND R11, R5, R5 + AND R12, R6, R6 + MOVM.IA.W [R2-R6], (R0) + EOR R2, R2, R2 + EOR R3, R3, R3 + EOR R4, R4, R4 + EOR R5, R5, R5 + EOR R6, R6, R6 + MOVM.IA.W [R2-R6], (R0) + MOVM.IA.W (R1), [R2-R5] + MOVM.IA [R2-R6], (R0) + ADD $20, R13, R0 + MOVM.DA (R0), [R4-R7] + RET + +#define MOVW_UNALIGNED(Rsrc, Rdst, Rtmp, offset) \ + MOVBU (offset+0)(Rsrc), Rtmp; \ + MOVBU Rtmp, (offset+0)(Rdst); \ + MOVBU (offset+1)(Rsrc), Rtmp; \ + MOVBU Rtmp, (offset+1)(Rdst); \ + MOVBU (offset+2)(Rsrc), Rtmp; \ + MOVBU Rtmp, (offset+2)(Rdst); \ + MOVBU (offset+3)(Rsrc), Rtmp; \ + MOVBU Rtmp, (offset+3)(Rdst) + +TEXT poly1305_blocks_armv6<>(SB), NOSPLIT, $0 + // Needs 24 bytes of stack for saved registers and then 88 bytes of + // scratch space after that. We assume that 24 bytes at (R13) have + // already been used: four bytes for the link register saved in the + // prelude of poly1305_auth_armv6, four bytes for saving the value of g + // in that function and 16 bytes of scratch space used around + // poly1305_finish_ext_armv6_skip1. + ADD $24, R13, R12 + MOVM.IB [R4-R8, R14], (R12) + MOVW R0, 88(R13) + MOVW R1, 92(R13) + MOVW R2, 96(R13) + MOVW R1, R14 + MOVW R2, R12 + MOVW 56(R0), R8 + WORD $0xe1180008 // TST R8, R8 not working see issue 5921 + EOR R6, R6, R6 + MOVW.EQ $(1<<24), R6 + MOVW R6, 84(R13) + ADD $116, R13, g + MOVM.IA (R0), [R0-R9] + MOVM.IA [R0-R4], (g) + CMP $16, R12 + BLO poly1305_blocks_armv6_done + +poly1305_blocks_armv6_mainloop: + WORD $0xe31e0003 // TST R14, #3 not working see issue 5921 + BEQ poly1305_blocks_armv6_mainloop_aligned + ADD $100, R13, g + MOVW_UNALIGNED(R14, g, R0, 0) + MOVW_UNALIGNED(R14, g, R0, 4) + MOVW_UNALIGNED(R14, g, R0, 8) + MOVW_UNALIGNED(R14, g, R0, 12) + MOVM.IA (g), [R0-R3] + ADD $16, R14 + B poly1305_blocks_armv6_mainloop_loaded + +poly1305_blocks_armv6_mainloop_aligned: + MOVM.IA.W (R14), [R0-R3] + +poly1305_blocks_armv6_mainloop_loaded: + MOVW R0>>26, g + MOVW R1>>20, R11 + MOVW R2>>14, R12 + MOVW R14, 92(R13) + MOVW R3>>8, R4 + ORR R1<<6, g, g + ORR R2<<12, R11, R11 + ORR R3<<18, R12, R12 + BIC $0xfc000000, R0, R0 + BIC $0xfc000000, g, g + MOVW 84(R13), R3 + BIC $0xfc000000, R11, R11 + BIC $0xfc000000, R12, R12 + ADD R0, R5, R5 + ADD g, R6, R6 + ORR R3, R4, R4 + ADD R11, R7, R7 + ADD $116, R13, R14 + ADD R12, R8, R8 + ADD R4, R9, R9 + MOVM.IA (R14), [R0-R4] + MULLU R4, R5, (R11, g) + MULLU R3, R5, (R14, R12) + MULALU R3, R6, (R11, g) + MULALU R2, R6, (R14, R12) + MULALU R2, R7, (R11, g) + MULALU R1, R7, (R14, R12) + ADD R4<<2, R4, R4 + ADD R3<<2, R3, R3 + MULALU R1, R8, (R11, g) + MULALU R0, R8, (R14, R12) + MULALU R0, R9, (R11, g) + MULALU R4, R9, (R14, R12) + MOVW g, 76(R13) + MOVW R11, 80(R13) + MOVW R12, 68(R13) + MOVW R14, 72(R13) + MULLU R2, R5, (R11, g) + MULLU R1, R5, (R14, R12) + MULALU R1, R6, (R11, g) + MULALU R0, R6, (R14, R12) + MULALU R0, R7, (R11, g) + MULALU R4, R7, (R14, R12) + ADD R2<<2, R2, R2 + ADD R1<<2, R1, R1 + MULALU R4, R8, (R11, g) + MULALU R3, R8, (R14, R12) + MULALU R3, R9, (R11, g) + MULALU R2, R9, (R14, R12) + MOVW g, 60(R13) + MOVW R11, 64(R13) + MOVW R12, 52(R13) + MOVW R14, 56(R13) + MULLU R0, R5, (R11, g) + MULALU R4, R6, (R11, g) + MULALU R3, R7, (R11, g) + MULALU R2, R8, (R11, g) + MULALU R1, R9, (R11, g) + ADD $52, R13, R0 + MOVM.IA (R0), [R0-R7] + MOVW g>>26, R12 + MOVW R4>>26, R14 + ORR R11<<6, R12, R12 + ORR R5<<6, R14, R14 + BIC $0xfc000000, g, g + BIC $0xfc000000, R4, R4 + ADD.S R12, R0, R0 + ADC $0, R1, R1 + ADD.S R14, R6, R6 + ADC $0, R7, R7 + MOVW R0>>26, R12 + MOVW R6>>26, R14 + ORR R1<<6, R12, R12 + ORR R7<<6, R14, R14 + BIC $0xfc000000, R0, R0 + BIC $0xfc000000, R6, R6 + ADD R14<<2, R14, R14 + ADD.S R12, R2, R2 + ADC $0, R3, R3 + ADD R14, g, g + MOVW R2>>26, R12 + MOVW g>>26, R14 + ORR R3<<6, R12, R12 + BIC $0xfc000000, g, R5 + BIC $0xfc000000, R2, R7 + ADD R12, R4, R4 + ADD R14, R0, R0 + MOVW R4>>26, R12 + BIC $0xfc000000, R4, R8 + ADD R12, R6, R9 + MOVW 96(R13), R12 + MOVW 92(R13), R14 + MOVW R0, R6 + CMP $32, R12 + SUB $16, R12, R12 + MOVW R12, 96(R13) + BHS poly1305_blocks_armv6_mainloop + +poly1305_blocks_armv6_done: + MOVW 88(R13), R12 + MOVW R5, 20(R12) + MOVW R6, 24(R12) + MOVW R7, 28(R12) + MOVW R8, 32(R12) + MOVW R9, 36(R12) + ADD $48, R13, R0 + MOVM.DA (R0), [R4-R8, R14] + RET + +#define MOVHUP_UNALIGNED(Rsrc, Rdst, Rtmp) \ + MOVBU.P 1(Rsrc), Rtmp; \ + MOVBU.P Rtmp, 1(Rdst); \ + MOVBU.P 1(Rsrc), Rtmp; \ + MOVBU.P Rtmp, 1(Rdst) + +#define MOVWP_UNALIGNED(Rsrc, Rdst, Rtmp) \ + MOVHUP_UNALIGNED(Rsrc, Rdst, Rtmp); \ + MOVHUP_UNALIGNED(Rsrc, Rdst, Rtmp) + +// func poly1305_auth_armv6(out *[16]byte, m *byte, mlen uint32, key *[32]key) +TEXT ·poly1305_auth_armv6(SB), $196-16 + // The value 196, just above, is the sum of 64 (the size of the context + // structure) and 132 (the amount of stack needed). + // + // At this point, the stack pointer (R13) has been moved down. It + // points to the saved link register and there's 196 bytes of free + // space above it. + // + // The stack for this function looks like: + // + // +--------------------- + // | + // | 64 bytes of context structure + // | + // +--------------------- + // | + // | 112 bytes for poly1305_blocks_armv6 + // | + // +--------------------- + // | 16 bytes of final block, constructed at + // | poly1305_finish_ext_armv6_skip8 + // +--------------------- + // | four bytes of saved 'g' + // +--------------------- + // | lr, saved by prelude <- R13 points here + // +--------------------- + MOVW g, 4(R13) + + MOVW out+0(FP), R4 + MOVW m+4(FP), R5 + MOVW mlen+8(FP), R6 + MOVW key+12(FP), R7 + + ADD $136, R13, R0 // 136 = 4 + 4 + 16 + 112 + MOVW R7, R1 + + // poly1305_init_ext_armv6 will write to the stack from R13+4, but + // that's ok because none of the other values have been written yet. + BL poly1305_init_ext_armv6<>(SB) + BIC.S $15, R6, R2 + BEQ poly1305_auth_armv6_noblocks + ADD $136, R13, R0 + MOVW R5, R1 + ADD R2, R5, R5 + SUB R2, R6, R6 + BL poly1305_blocks_armv6<>(SB) + +poly1305_auth_armv6_noblocks: + ADD $136, R13, R0 + MOVW R5, R1 + MOVW R6, R2 + MOVW R4, R3 + + MOVW R0, R5 + MOVW R1, R6 + MOVW R2, R7 + MOVW R3, R8 + AND.S R2, R2, R2 + BEQ poly1305_finish_ext_armv6_noremaining + EOR R0, R0 + ADD $8, R13, R9 // 8 = offset to 16 byte scratch space + MOVW R0, (R9) + MOVW R0, 4(R9) + MOVW R0, 8(R9) + MOVW R0, 12(R9) + WORD $0xe3110003 // TST R1, #3 not working see issue 5921 + BEQ poly1305_finish_ext_armv6_aligned + WORD $0xe3120008 // TST R2, #8 not working see issue 5921 + BEQ poly1305_finish_ext_armv6_skip8 + MOVWP_UNALIGNED(R1, R9, g) + MOVWP_UNALIGNED(R1, R9, g) + +poly1305_finish_ext_armv6_skip8: + WORD $0xe3120004 // TST $4, R2 not working see issue 5921 + BEQ poly1305_finish_ext_armv6_skip4 + MOVWP_UNALIGNED(R1, R9, g) + +poly1305_finish_ext_armv6_skip4: + WORD $0xe3120002 // TST $2, R2 not working see issue 5921 + BEQ poly1305_finish_ext_armv6_skip2 + MOVHUP_UNALIGNED(R1, R9, g) + B poly1305_finish_ext_armv6_skip2 + +poly1305_finish_ext_armv6_aligned: + WORD $0xe3120008 // TST R2, #8 not working see issue 5921 + BEQ poly1305_finish_ext_armv6_skip8_aligned + MOVM.IA.W (R1), [g-R11] + MOVM.IA.W [g-R11], (R9) + +poly1305_finish_ext_armv6_skip8_aligned: + WORD $0xe3120004 // TST $4, R2 not working see issue 5921 + BEQ poly1305_finish_ext_armv6_skip4_aligned + MOVW.P 4(R1), g + MOVW.P g, 4(R9) + +poly1305_finish_ext_armv6_skip4_aligned: + WORD $0xe3120002 // TST $2, R2 not working see issue 5921 + BEQ poly1305_finish_ext_armv6_skip2 + MOVHU.P 2(R1), g + MOVH.P g, 2(R9) + +poly1305_finish_ext_armv6_skip2: + WORD $0xe3120001 // TST $1, R2 not working see issue 5921 + BEQ poly1305_finish_ext_armv6_skip1 + MOVBU.P 1(R1), g + MOVBU.P g, 1(R9) + +poly1305_finish_ext_armv6_skip1: + MOVW $1, R11 + MOVBU R11, 0(R9) + MOVW R11, 56(R5) + MOVW R5, R0 + ADD $8, R13, R1 + MOVW $16, R2 + BL poly1305_blocks_armv6<>(SB) + +poly1305_finish_ext_armv6_noremaining: + MOVW 20(R5), R0 + MOVW 24(R5), R1 + MOVW 28(R5), R2 + MOVW 32(R5), R3 + MOVW 36(R5), R4 + MOVW R4>>26, R12 + BIC $0xfc000000, R4, R4 + ADD R12<<2, R12, R12 + ADD R12, R0, R0 + MOVW R0>>26, R12 + BIC $0xfc000000, R0, R0 + ADD R12, R1, R1 + MOVW R1>>26, R12 + BIC $0xfc000000, R1, R1 + ADD R12, R2, R2 + MOVW R2>>26, R12 + BIC $0xfc000000, R2, R2 + ADD R12, R3, R3 + MOVW R3>>26, R12 + BIC $0xfc000000, R3, R3 + ADD R12, R4, R4 + ADD $5, R0, R6 + MOVW R6>>26, R12 + BIC $0xfc000000, R6, R6 + ADD R12, R1, R7 + MOVW R7>>26, R12 + BIC $0xfc000000, R7, R7 + ADD R12, R2, g + MOVW g>>26, R12 + BIC $0xfc000000, g, g + ADD R12, R3, R11 + MOVW $-(1<<26), R12 + ADD R11>>26, R12, R12 + BIC $0xfc000000, R11, R11 + ADD R12, R4, R9 + MOVW R9>>31, R12 + SUB $1, R12 + AND R12, R6, R6 + AND R12, R7, R7 + AND R12, g, g + AND R12, R11, R11 + AND R12, R9, R9 + MVN R12, R12 + AND R12, R0, R0 + AND R12, R1, R1 + AND R12, R2, R2 + AND R12, R3, R3 + AND R12, R4, R4 + ORR R6, R0, R0 + ORR R7, R1, R1 + ORR g, R2, R2 + ORR R11, R3, R3 + ORR R9, R4, R4 + ORR R1<<26, R0, R0 + MOVW R1>>6, R1 + ORR R2<<20, R1, R1 + MOVW R2>>12, R2 + ORR R3<<14, R2, R2 + MOVW R3>>18, R3 + ORR R4<<8, R3, R3 + MOVW 40(R5), R6 + MOVW 44(R5), R7 + MOVW 48(R5), g + MOVW 52(R5), R11 + ADD.S R6, R0, R0 + ADC.S R7, R1, R1 + ADC.S g, R2, R2 + ADC.S R11, R3, R3 + MOVM.IA [R0-R3], (R8) + MOVW R5, R12 + EOR R0, R0, R0 + EOR R1, R1, R1 + EOR R2, R2, R2 + EOR R3, R3, R3 + EOR R4, R4, R4 + EOR R5, R5, R5 + EOR R6, R6, R6 + EOR R7, R7, R7 + MOVM.IA.W [R0-R7], (R12) + MOVM.IA [R0-R7], (R12) + MOVW 4(R13), g + RET diff --git a/vendor/golang.org/x/crypto/poly1305/sum_generic.go b/vendor/golang.org/x/crypto/poly1305/sum_generic.go new file mode 100644 index 0000000..bab76ef --- /dev/null +++ b/vendor/golang.org/x/crypto/poly1305/sum_generic.go @@ -0,0 +1,172 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package poly1305 + +import "encoding/binary" + +const ( + msgBlock = uint32(1 << 24) + finalBlock = uint32(0) +) + +// sumGeneric generates an authenticator for msg using a one-time key and +// puts the 16-byte result into out. This is the generic implementation of +// Sum and should be called if no assembly implementation is available. +func sumGeneric(out *[TagSize]byte, msg []byte, key *[32]byte) { + h := newMACGeneric(key) + h.Write(msg) + h.Sum(out) +} + +func newMACGeneric(key *[32]byte) (h macGeneric) { + h.r[0] = binary.LittleEndian.Uint32(key[0:]) & 0x3ffffff + h.r[1] = (binary.LittleEndian.Uint32(key[3:]) >> 2) & 0x3ffff03 + h.r[2] = (binary.LittleEndian.Uint32(key[6:]) >> 4) & 0x3ffc0ff + h.r[3] = (binary.LittleEndian.Uint32(key[9:]) >> 6) & 0x3f03fff + h.r[4] = (binary.LittleEndian.Uint32(key[12:]) >> 8) & 0x00fffff + + h.s[0] = binary.LittleEndian.Uint32(key[16:]) + h.s[1] = binary.LittleEndian.Uint32(key[20:]) + h.s[2] = binary.LittleEndian.Uint32(key[24:]) + h.s[3] = binary.LittleEndian.Uint32(key[28:]) + return +} + +type macGeneric struct { + h, r [5]uint32 + s [4]uint32 + + buffer [TagSize]byte + offset int +} + +func (h *macGeneric) Write(p []byte) (n int, err error) { + n = len(p) + if h.offset > 0 { + remaining := TagSize - h.offset + if n < remaining { + h.offset += copy(h.buffer[h.offset:], p) + return n, nil + } + copy(h.buffer[h.offset:], p[:remaining]) + p = p[remaining:] + h.offset = 0 + updateGeneric(h.buffer[:], msgBlock, &(h.h), &(h.r)) + } + if nn := len(p) - (len(p) % TagSize); nn > 0 { + updateGeneric(p, msgBlock, &(h.h), &(h.r)) + p = p[nn:] + } + if len(p) > 0 { + h.offset += copy(h.buffer[h.offset:], p) + } + return n, nil +} + +func (h *macGeneric) Sum(out *[16]byte) { + H, R := h.h, h.r + if h.offset > 0 { + var buffer [TagSize]byte + copy(buffer[:], h.buffer[:h.offset]) + buffer[h.offset] = 1 // invariant: h.offset < TagSize + updateGeneric(buffer[:], finalBlock, &H, &R) + } + finalizeGeneric(out, &H, &(h.s)) +} + +func updateGeneric(msg []byte, flag uint32, h, r *[5]uint32) { + h0, h1, h2, h3, h4 := h[0], h[1], h[2], h[3], h[4] + r0, r1, r2, r3, r4 := uint64(r[0]), uint64(r[1]), uint64(r[2]), uint64(r[3]), uint64(r[4]) + R1, R2, R3, R4 := r1*5, r2*5, r3*5, r4*5 + + for len(msg) >= TagSize { + // h += msg + h0 += binary.LittleEndian.Uint32(msg[0:]) & 0x3ffffff + h1 += (binary.LittleEndian.Uint32(msg[3:]) >> 2) & 0x3ffffff + h2 += (binary.LittleEndian.Uint32(msg[6:]) >> 4) & 0x3ffffff + h3 += (binary.LittleEndian.Uint32(msg[9:]) >> 6) & 0x3ffffff + h4 += (binary.LittleEndian.Uint32(msg[12:]) >> 8) | flag + + // h *= r + d0 := (uint64(h0) * r0) + (uint64(h1) * R4) + (uint64(h2) * R3) + (uint64(h3) * R2) + (uint64(h4) * R1) + d1 := (d0 >> 26) + (uint64(h0) * r1) + (uint64(h1) * r0) + (uint64(h2) * R4) + (uint64(h3) * R3) + (uint64(h4) * R2) + d2 := (d1 >> 26) + (uint64(h0) * r2) + (uint64(h1) * r1) + (uint64(h2) * r0) + (uint64(h3) * R4) + (uint64(h4) * R3) + d3 := (d2 >> 26) + (uint64(h0) * r3) + (uint64(h1) * r2) + (uint64(h2) * r1) + (uint64(h3) * r0) + (uint64(h4) * R4) + d4 := (d3 >> 26) + (uint64(h0) * r4) + (uint64(h1) * r3) + (uint64(h2) * r2) + (uint64(h3) * r1) + (uint64(h4) * r0) + + // h %= p + h0 = uint32(d0) & 0x3ffffff + h1 = uint32(d1) & 0x3ffffff + h2 = uint32(d2) & 0x3ffffff + h3 = uint32(d3) & 0x3ffffff + h4 = uint32(d4) & 0x3ffffff + + h0 += uint32(d4>>26) * 5 + h1 += h0 >> 26 + h0 = h0 & 0x3ffffff + + msg = msg[TagSize:] + } + + h[0], h[1], h[2], h[3], h[4] = h0, h1, h2, h3, h4 +} + +func finalizeGeneric(out *[TagSize]byte, h *[5]uint32, s *[4]uint32) { + h0, h1, h2, h3, h4 := h[0], h[1], h[2], h[3], h[4] + + // h %= p reduction + h2 += h1 >> 26 + h1 &= 0x3ffffff + h3 += h2 >> 26 + h2 &= 0x3ffffff + h4 += h3 >> 26 + h3 &= 0x3ffffff + h0 += 5 * (h4 >> 26) + h4 &= 0x3ffffff + h1 += h0 >> 26 + h0 &= 0x3ffffff + + // h - p + t0 := h0 + 5 + t1 := h1 + (t0 >> 26) + t2 := h2 + (t1 >> 26) + t3 := h3 + (t2 >> 26) + t4 := h4 + (t3 >> 26) - (1 << 26) + t0 &= 0x3ffffff + t1 &= 0x3ffffff + t2 &= 0x3ffffff + t3 &= 0x3ffffff + + // select h if h < p else h - p + t_mask := (t4 >> 31) - 1 + h_mask := ^t_mask + h0 = (h0 & h_mask) | (t0 & t_mask) + h1 = (h1 & h_mask) | (t1 & t_mask) + h2 = (h2 & h_mask) | (t2 & t_mask) + h3 = (h3 & h_mask) | (t3 & t_mask) + h4 = (h4 & h_mask) | (t4 & t_mask) + + // h %= 2^128 + h0 |= h1 << 26 + h1 = ((h1 >> 6) | (h2 << 20)) + h2 = ((h2 >> 12) | (h3 << 14)) + h3 = ((h3 >> 18) | (h4 << 8)) + + // s: the s part of the key + // tag = (h + s) % (2^128) + t := uint64(h0) + uint64(s[0]) + h0 = uint32(t) + t = uint64(h1) + uint64(s[1]) + (t >> 32) + h1 = uint32(t) + t = uint64(h2) + uint64(s[2]) + (t >> 32) + h2 = uint32(t) + t = uint64(h3) + uint64(s[3]) + (t >> 32) + h3 = uint32(t) + + binary.LittleEndian.PutUint32(out[0:], h0) + binary.LittleEndian.PutUint32(out[4:], h1) + binary.LittleEndian.PutUint32(out[8:], h2) + binary.LittleEndian.PutUint32(out[12:], h3) +} diff --git a/vendor/golang.org/x/crypto/poly1305/sum_noasm.go b/vendor/golang.org/x/crypto/poly1305/sum_noasm.go new file mode 100644 index 0000000..8a9c207 --- /dev/null +++ b/vendor/golang.org/x/crypto/poly1305/sum_noasm.go @@ -0,0 +1,16 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build s390x,!go1.11 !arm,!amd64,!s390x,!ppc64le gccgo appengine nacl + +package poly1305 + +// Sum generates an authenticator for msg using a one-time key and puts the +// 16-byte result into out. Authenticating two different messages with the same +// key allows an attacker to forge messages at will. +func Sum(out *[TagSize]byte, msg []byte, key *[32]byte) { + h := newMAC(key) + h.Write(msg) + h.Sum(out) +} diff --git a/vendor/golang.org/x/crypto/poly1305/sum_ppc64le.go b/vendor/golang.org/x/crypto/poly1305/sum_ppc64le.go new file mode 100644 index 0000000..2402b63 --- /dev/null +++ b/vendor/golang.org/x/crypto/poly1305/sum_ppc64le.go @@ -0,0 +1,68 @@ +// Copyright 2019 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build ppc64le,!gccgo,!appengine + +package poly1305 + +//go:noescape +func initialize(state *[7]uint64, key *[32]byte) + +//go:noescape +func update(state *[7]uint64, msg []byte) + +//go:noescape +func finalize(tag *[TagSize]byte, state *[7]uint64) + +// Sum generates an authenticator for m using a one-time key and puts the +// 16-byte result into out. Authenticating two different messages with the same +// key allows an attacker to forge messages at will. +func Sum(out *[16]byte, m []byte, key *[32]byte) { + h := newMAC(key) + h.Write(m) + h.Sum(out) +} + +func newMAC(key *[32]byte) (h mac) { + initialize(&h.state, key) + return +} + +type mac struct { + state [7]uint64 // := uint64{ h0, h1, h2, r0, r1, pad0, pad1 } + + buffer [TagSize]byte + offset int +} + +func (h *mac) Write(p []byte) (n int, err error) { + n = len(p) + if h.offset > 0 { + remaining := TagSize - h.offset + if n < remaining { + h.offset += copy(h.buffer[h.offset:], p) + return n, nil + } + copy(h.buffer[h.offset:], p[:remaining]) + p = p[remaining:] + h.offset = 0 + update(&h.state, h.buffer[:]) + } + if nn := len(p) - (len(p) % TagSize); nn > 0 { + update(&h.state, p[:nn]) + p = p[nn:] + } + if len(p) > 0 { + h.offset += copy(h.buffer[h.offset:], p) + } + return n, nil +} + +func (h *mac) Sum(out *[16]byte) { + state := h.state + if h.offset > 0 { + update(&state, h.buffer[:h.offset]) + } + finalize(out, &state) +} diff --git a/vendor/golang.org/x/crypto/poly1305/sum_ppc64le.s b/vendor/golang.org/x/crypto/poly1305/sum_ppc64le.s new file mode 100644 index 0000000..55c7167 --- /dev/null +++ b/vendor/golang.org/x/crypto/poly1305/sum_ppc64le.s @@ -0,0 +1,247 @@ +// Copyright 2019 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build ppc64le,!gccgo,!appengine + +#include "textflag.h" + +// This was ported from the amd64 implementation. + +#define POLY1305_ADD(msg, h0, h1, h2, t0, t1, t2) \ + MOVD (msg), t0; \ + MOVD 8(msg), t1; \ + MOVD $1, t2; \ + ADDC t0, h0, h0; \ + ADDE t1, h1, h1; \ + ADDE t2, h2; \ + ADD $16, msg + +#define POLY1305_MUL(h0, h1, h2, r0, r1, t0, t1, t2, t3, t4, t5) \ + MULLD r0, h0, t0; \ + MULLD r0, h1, t4; \ + MULHDU r0, h0, t1; \ + MULHDU r0, h1, t5; \ + ADDC t4, t1, t1; \ + MULLD r0, h2, t2; \ + ADDZE t5; \ + MULHDU r1, h0, t4; \ + MULLD r1, h0, h0; \ + ADD t5, t2, t2; \ + ADDC h0, t1, t1; \ + MULLD h2, r1, t3; \ + ADDZE t4, h0; \ + MULHDU r1, h1, t5; \ + MULLD r1, h1, t4; \ + ADDC t4, t2, t2; \ + ADDE t5, t3, t3; \ + ADDC h0, t2, t2; \ + MOVD $-4, t4; \ + MOVD t0, h0; \ + MOVD t1, h1; \ + ADDZE t3; \ + ANDCC $3, t2, h2; \ + AND t2, t4, t0; \ + ADDC t0, h0, h0; \ + ADDE t3, h1, h1; \ + SLD $62, t3, t4; \ + SRD $2, t2; \ + ADDZE h2; \ + OR t4, t2, t2; \ + SRD $2, t3; \ + ADDC t2, h0, h0; \ + ADDE t3, h1, h1; \ + ADDZE h2 + +DATA ·poly1305Mask<>+0x00(SB)/8, $0x0FFFFFFC0FFFFFFF +DATA ·poly1305Mask<>+0x08(SB)/8, $0x0FFFFFFC0FFFFFFC +GLOBL ·poly1305Mask<>(SB), RODATA, $16 + +// func update(state *[7]uint64, msg []byte) + +TEXT ·update(SB), $0-32 + MOVD state+0(FP), R3 + MOVD msg_base+8(FP), R4 + MOVD msg_len+16(FP), R5 + + MOVD 0(R3), R8 // h0 + MOVD 8(R3), R9 // h1 + MOVD 16(R3), R10 // h2 + MOVD 24(R3), R11 // r0 + MOVD 32(R3), R12 // r1 + + CMP R5, $16 + BLT bytes_between_0_and_15 + +loop: + POLY1305_ADD(R4, R8, R9, R10, R20, R21, R22) + +multiply: + POLY1305_MUL(R8, R9, R10, R11, R12, R16, R17, R18, R14, R20, R21) + ADD $-16, R5 + CMP R5, $16 + BGE loop + +bytes_between_0_and_15: + CMP $0, R5 + BEQ done + MOVD $0, R16 // h0 + MOVD $0, R17 // h1 + +flush_buffer: + CMP R5, $8 + BLE just1 + + MOVD $8, R21 + SUB R21, R5, R21 + + // Greater than 8 -- load the rightmost remaining bytes in msg + // and put into R17 (h1) + MOVD (R4)(R21), R17 + MOVD $16, R22 + + // Find the offset to those bytes + SUB R5, R22, R22 + SLD $3, R22 + + // Shift to get only the bytes in msg + SRD R22, R17, R17 + + // Put 1 at high end + MOVD $1, R23 + SLD $3, R21 + SLD R21, R23, R23 + OR R23, R17, R17 + + // Remainder is 8 + MOVD $8, R5 + +just1: + CMP R5, $8 + BLT less8 + + // Exactly 8 + MOVD (R4), R16 + + CMP $0, R17 + + // Check if we've already set R17; if not + // set 1 to indicate end of msg. + BNE carry + MOVD $1, R17 + BR carry + +less8: + MOVD $0, R16 // h0 + MOVD $0, R22 // shift count + CMP R5, $4 + BLT less4 + MOVWZ (R4), R16 + ADD $4, R4 + ADD $-4, R5 + MOVD $32, R22 + +less4: + CMP R5, $2 + BLT less2 + MOVHZ (R4), R21 + SLD R22, R21, R21 + OR R16, R21, R16 + ADD $16, R22 + ADD $-2, R5 + ADD $2, R4 + +less2: + CMP $0, R5 + BEQ insert1 + MOVBZ (R4), R21 + SLD R22, R21, R21 + OR R16, R21, R16 + ADD $8, R22 + +insert1: + // Insert 1 at end of msg + MOVD $1, R21 + SLD R22, R21, R21 + OR R16, R21, R16 + +carry: + // Add new values to h0, h1, h2 + ADDC R16, R8 + ADDE R17, R9 + ADDE $0, R10 + MOVD $16, R5 + ADD R5, R4 + BR multiply + +done: + // Save h0, h1, h2 in state + MOVD R8, 0(R3) + MOVD R9, 8(R3) + MOVD R10, 16(R3) + RET + +// func initialize(state *[7]uint64, key *[32]byte) +TEXT ·initialize(SB), $0-16 + MOVD state+0(FP), R3 + MOVD key+8(FP), R4 + + // state[0...7] is initialized with zero + // Load key + MOVD 0(R4), R5 + MOVD 8(R4), R6 + MOVD 16(R4), R7 + MOVD 24(R4), R8 + + // Address of key mask + MOVD $·poly1305Mask<>(SB), R9 + + // Save original key in state + MOVD R7, 40(R3) + MOVD R8, 48(R3) + + // Get mask + MOVD (R9), R7 + MOVD 8(R9), R8 + + // And with key + AND R5, R7, R5 + AND R6, R8, R6 + + // Save masked key in state + MOVD R5, 24(R3) + MOVD R6, 32(R3) + RET + +// func finalize(tag *[TagSize]byte, state *[7]uint64) +TEXT ·finalize(SB), $0-16 + MOVD tag+0(FP), R3 + MOVD state+8(FP), R4 + + // Get h0, h1, h2 from state + MOVD 0(R4), R5 + MOVD 8(R4), R6 + MOVD 16(R4), R7 + + // Save h0, h1 + MOVD R5, R8 + MOVD R6, R9 + MOVD $3, R20 + MOVD $-1, R21 + SUBC $-5, R5 + SUBE R21, R6 + SUBE R20, R7 + MOVD $0, R21 + SUBZE R21 + + // Check for carry + CMP $0, R21 + ISEL $2, R5, R8, R5 + ISEL $2, R6, R9, R6 + MOVD 40(R4), R8 + MOVD 48(R4), R9 + ADDC R8, R5 + ADDE R9, R6 + MOVD R5, 0(R3) + MOVD R6, 8(R3) + RET diff --git a/vendor/golang.org/x/crypto/poly1305/sum_s390x.go b/vendor/golang.org/x/crypto/poly1305/sum_s390x.go new file mode 100644 index 0000000..ec99e07 --- /dev/null +++ b/vendor/golang.org/x/crypto/poly1305/sum_s390x.go @@ -0,0 +1,42 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build s390x,go1.11,!gccgo,!appengine + +package poly1305 + +import ( + "golang.org/x/sys/cpu" +) + +// poly1305vx is an assembly implementation of Poly1305 that uses vector +// instructions. It must only be called if the vector facility (vx) is +// available. +//go:noescape +func poly1305vx(out *[16]byte, m *byte, mlen uint64, key *[32]byte) + +// poly1305vmsl is an assembly implementation of Poly1305 that uses vector +// instructions, including VMSL. It must only be called if the vector facility (vx) is +// available and if VMSL is supported. +//go:noescape +func poly1305vmsl(out *[16]byte, m *byte, mlen uint64, key *[32]byte) + +// Sum generates an authenticator for m using a one-time key and puts the +// 16-byte result into out. Authenticating two different messages with the same +// key allows an attacker to forge messages at will. +func Sum(out *[16]byte, m []byte, key *[32]byte) { + if cpu.S390X.HasVX { + var mPtr *byte + if len(m) > 0 { + mPtr = &m[0] + } + if cpu.S390X.HasVXE && len(m) > 256 { + poly1305vmsl(out, mPtr, uint64(len(m)), key) + } else { + poly1305vx(out, mPtr, uint64(len(m)), key) + } + } else { + sumGeneric(out, m, key) + } +} diff --git a/vendor/golang.org/x/crypto/poly1305/sum_s390x.s b/vendor/golang.org/x/crypto/poly1305/sum_s390x.s new file mode 100644 index 0000000..ca5a309 --- /dev/null +++ b/vendor/golang.org/x/crypto/poly1305/sum_s390x.s @@ -0,0 +1,378 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build s390x,go1.11,!gccgo,!appengine + +#include "textflag.h" + +// Implementation of Poly1305 using the vector facility (vx). + +// constants +#define MOD26 V0 +#define EX0 V1 +#define EX1 V2 +#define EX2 V3 + +// temporaries +#define T_0 V4 +#define T_1 V5 +#define T_2 V6 +#define T_3 V7 +#define T_4 V8 + +// key (r) +#define R_0 V9 +#define R_1 V10 +#define R_2 V11 +#define R_3 V12 +#define R_4 V13 +#define R5_1 V14 +#define R5_2 V15 +#define R5_3 V16 +#define R5_4 V17 +#define RSAVE_0 R5 +#define RSAVE_1 R6 +#define RSAVE_2 R7 +#define RSAVE_3 R8 +#define RSAVE_4 R9 +#define R5SAVE_1 V28 +#define R5SAVE_2 V29 +#define R5SAVE_3 V30 +#define R5SAVE_4 V31 + +// message block +#define F_0 V18 +#define F_1 V19 +#define F_2 V20 +#define F_3 V21 +#define F_4 V22 + +// accumulator +#define H_0 V23 +#define H_1 V24 +#define H_2 V25 +#define H_3 V26 +#define H_4 V27 + +GLOBL ·keyMask<>(SB), RODATA, $16 +DATA ·keyMask<>+0(SB)/8, $0xffffff0ffcffff0f +DATA ·keyMask<>+8(SB)/8, $0xfcffff0ffcffff0f + +GLOBL ·bswapMask<>(SB), RODATA, $16 +DATA ·bswapMask<>+0(SB)/8, $0x0f0e0d0c0b0a0908 +DATA ·bswapMask<>+8(SB)/8, $0x0706050403020100 + +GLOBL ·constants<>(SB), RODATA, $64 +// MOD26 +DATA ·constants<>+0(SB)/8, $0x3ffffff +DATA ·constants<>+8(SB)/8, $0x3ffffff +// EX0 +DATA ·constants<>+16(SB)/8, $0x0006050403020100 +DATA ·constants<>+24(SB)/8, $0x1016151413121110 +// EX1 +DATA ·constants<>+32(SB)/8, $0x060c0b0a09080706 +DATA ·constants<>+40(SB)/8, $0x161c1b1a19181716 +// EX2 +DATA ·constants<>+48(SB)/8, $0x0d0d0d0d0d0f0e0d +DATA ·constants<>+56(SB)/8, $0x1d1d1d1d1d1f1e1d + +// h = (f*g) % (2**130-5) [partial reduction] +#define MULTIPLY(f0, f1, f2, f3, f4, g0, g1, g2, g3, g4, g51, g52, g53, g54, h0, h1, h2, h3, h4) \ + VMLOF f0, g0, h0 \ + VMLOF f0, g1, h1 \ + VMLOF f0, g2, h2 \ + VMLOF f0, g3, h3 \ + VMLOF f0, g4, h4 \ + VMLOF f1, g54, T_0 \ + VMLOF f1, g0, T_1 \ + VMLOF f1, g1, T_2 \ + VMLOF f1, g2, T_3 \ + VMLOF f1, g3, T_4 \ + VMALOF f2, g53, h0, h0 \ + VMALOF f2, g54, h1, h1 \ + VMALOF f2, g0, h2, h2 \ + VMALOF f2, g1, h3, h3 \ + VMALOF f2, g2, h4, h4 \ + VMALOF f3, g52, T_0, T_0 \ + VMALOF f3, g53, T_1, T_1 \ + VMALOF f3, g54, T_2, T_2 \ + VMALOF f3, g0, T_3, T_3 \ + VMALOF f3, g1, T_4, T_4 \ + VMALOF f4, g51, h0, h0 \ + VMALOF f4, g52, h1, h1 \ + VMALOF f4, g53, h2, h2 \ + VMALOF f4, g54, h3, h3 \ + VMALOF f4, g0, h4, h4 \ + VAG T_0, h0, h0 \ + VAG T_1, h1, h1 \ + VAG T_2, h2, h2 \ + VAG T_3, h3, h3 \ + VAG T_4, h4, h4 + +// carry h0->h1 h3->h4, h1->h2 h4->h0, h0->h1 h2->h3, h3->h4 +#define REDUCE(h0, h1, h2, h3, h4) \ + VESRLG $26, h0, T_0 \ + VESRLG $26, h3, T_1 \ + VN MOD26, h0, h0 \ + VN MOD26, h3, h3 \ + VAG T_0, h1, h1 \ + VAG T_1, h4, h4 \ + VESRLG $26, h1, T_2 \ + VESRLG $26, h4, T_3 \ + VN MOD26, h1, h1 \ + VN MOD26, h4, h4 \ + VESLG $2, T_3, T_4 \ + VAG T_3, T_4, T_4 \ + VAG T_2, h2, h2 \ + VAG T_4, h0, h0 \ + VESRLG $26, h2, T_0 \ + VESRLG $26, h0, T_1 \ + VN MOD26, h2, h2 \ + VN MOD26, h0, h0 \ + VAG T_0, h3, h3 \ + VAG T_1, h1, h1 \ + VESRLG $26, h3, T_2 \ + VN MOD26, h3, h3 \ + VAG T_2, h4, h4 + +// expand in0 into d[0] and in1 into d[1] +#define EXPAND(in0, in1, d0, d1, d2, d3, d4) \ + VGBM $0x0707, d1 \ // d1=tmp + VPERM in0, in1, EX2, d4 \ + VPERM in0, in1, EX0, d0 \ + VPERM in0, in1, EX1, d2 \ + VN d1, d4, d4 \ + VESRLG $26, d0, d1 \ + VESRLG $30, d2, d3 \ + VESRLG $4, d2, d2 \ + VN MOD26, d0, d0 \ + VN MOD26, d1, d1 \ + VN MOD26, d2, d2 \ + VN MOD26, d3, d3 + +// pack h4:h0 into h1:h0 (no carry) +#define PACK(h0, h1, h2, h3, h4) \ + VESLG $26, h1, h1 \ + VESLG $26, h3, h3 \ + VO h0, h1, h0 \ + VO h2, h3, h2 \ + VESLG $4, h2, h2 \ + VLEIB $7, $48, h1 \ + VSLB h1, h2, h2 \ + VO h0, h2, h0 \ + VLEIB $7, $104, h1 \ + VSLB h1, h4, h3 \ + VO h3, h0, h0 \ + VLEIB $7, $24, h1 \ + VSRLB h1, h4, h1 + +// if h > 2**130-5 then h -= 2**130-5 +#define MOD(h0, h1, t0, t1, t2) \ + VZERO t0 \ + VLEIG $1, $5, t0 \ + VACCQ h0, t0, t1 \ + VAQ h0, t0, t0 \ + VONE t2 \ + VLEIG $1, $-4, t2 \ + VAQ t2, t1, t1 \ + VACCQ h1, t1, t1 \ + VONE t2 \ + VAQ t2, t1, t1 \ + VN h0, t1, t2 \ + VNC t0, t1, t1 \ + VO t1, t2, h0 + +// func poly1305vx(out *[16]byte, m *byte, mlen uint64, key *[32]key) +TEXT ·poly1305vx(SB), $0-32 + // This code processes up to 2 blocks (32 bytes) per iteration + // using the algorithm described in: + // NEON crypto, Daniel J. Bernstein & Peter Schwabe + // https://cryptojedi.org/papers/neoncrypto-20120320.pdf + LMG out+0(FP), R1, R4 // R1=out, R2=m, R3=mlen, R4=key + + // load MOD26, EX0, EX1 and EX2 + MOVD $·constants<>(SB), R5 + VLM (R5), MOD26, EX2 + + // setup r + VL (R4), T_0 + MOVD $·keyMask<>(SB), R6 + VL (R6), T_1 + VN T_0, T_1, T_0 + EXPAND(T_0, T_0, R_0, R_1, R_2, R_3, R_4) + + // setup r*5 + VLEIG $0, $5, T_0 + VLEIG $1, $5, T_0 + + // store r (for final block) + VMLOF T_0, R_1, R5SAVE_1 + VMLOF T_0, R_2, R5SAVE_2 + VMLOF T_0, R_3, R5SAVE_3 + VMLOF T_0, R_4, R5SAVE_4 + VLGVG $0, R_0, RSAVE_0 + VLGVG $0, R_1, RSAVE_1 + VLGVG $0, R_2, RSAVE_2 + VLGVG $0, R_3, RSAVE_3 + VLGVG $0, R_4, RSAVE_4 + + // skip r**2 calculation + CMPBLE R3, $16, skip + + // calculate r**2 + MULTIPLY(R_0, R_1, R_2, R_3, R_4, R_0, R_1, R_2, R_3, R_4, R5SAVE_1, R5SAVE_2, R5SAVE_3, R5SAVE_4, H_0, H_1, H_2, H_3, H_4) + REDUCE(H_0, H_1, H_2, H_3, H_4) + VLEIG $0, $5, T_0 + VLEIG $1, $5, T_0 + VMLOF T_0, H_1, R5_1 + VMLOF T_0, H_2, R5_2 + VMLOF T_0, H_3, R5_3 + VMLOF T_0, H_4, R5_4 + VLR H_0, R_0 + VLR H_1, R_1 + VLR H_2, R_2 + VLR H_3, R_3 + VLR H_4, R_4 + + // initialize h + VZERO H_0 + VZERO H_1 + VZERO H_2 + VZERO H_3 + VZERO H_4 + +loop: + CMPBLE R3, $32, b2 + VLM (R2), T_0, T_1 + SUB $32, R3 + MOVD $32(R2), R2 + EXPAND(T_0, T_1, F_0, F_1, F_2, F_3, F_4) + VLEIB $4, $1, F_4 + VLEIB $12, $1, F_4 + +multiply: + VAG H_0, F_0, F_0 + VAG H_1, F_1, F_1 + VAG H_2, F_2, F_2 + VAG H_3, F_3, F_3 + VAG H_4, F_4, F_4 + MULTIPLY(F_0, F_1, F_2, F_3, F_4, R_0, R_1, R_2, R_3, R_4, R5_1, R5_2, R5_3, R5_4, H_0, H_1, H_2, H_3, H_4) + REDUCE(H_0, H_1, H_2, H_3, H_4) + CMPBNE R3, $0, loop + +finish: + // sum vectors + VZERO T_0 + VSUMQG H_0, T_0, H_0 + VSUMQG H_1, T_0, H_1 + VSUMQG H_2, T_0, H_2 + VSUMQG H_3, T_0, H_3 + VSUMQG H_4, T_0, H_4 + + // h may be >= 2*(2**130-5) so we need to reduce it again + REDUCE(H_0, H_1, H_2, H_3, H_4) + + // carry h1->h4 + VESRLG $26, H_1, T_1 + VN MOD26, H_1, H_1 + VAQ T_1, H_2, H_2 + VESRLG $26, H_2, T_2 + VN MOD26, H_2, H_2 + VAQ T_2, H_3, H_3 + VESRLG $26, H_3, T_3 + VN MOD26, H_3, H_3 + VAQ T_3, H_4, H_4 + + // h is now < 2*(2**130-5) + // pack h into h1 (hi) and h0 (lo) + PACK(H_0, H_1, H_2, H_3, H_4) + + // if h > 2**130-5 then h -= 2**130-5 + MOD(H_0, H_1, T_0, T_1, T_2) + + // h += s + MOVD $·bswapMask<>(SB), R5 + VL (R5), T_1 + VL 16(R4), T_0 + VPERM T_0, T_0, T_1, T_0 // reverse bytes (to big) + VAQ T_0, H_0, H_0 + VPERM H_0, H_0, T_1, H_0 // reverse bytes (to little) + VST H_0, (R1) + + RET + +b2: + CMPBLE R3, $16, b1 + + // 2 blocks remaining + SUB $17, R3 + VL (R2), T_0 + VLL R3, 16(R2), T_1 + ADD $1, R3 + MOVBZ $1, R0 + CMPBEQ R3, $16, 2(PC) + VLVGB R3, R0, T_1 + EXPAND(T_0, T_1, F_0, F_1, F_2, F_3, F_4) + CMPBNE R3, $16, 2(PC) + VLEIB $12, $1, F_4 + VLEIB $4, $1, F_4 + + // setup [r²,r] + VLVGG $1, RSAVE_0, R_0 + VLVGG $1, RSAVE_1, R_1 + VLVGG $1, RSAVE_2, R_2 + VLVGG $1, RSAVE_3, R_3 + VLVGG $1, RSAVE_4, R_4 + VPDI $0, R5_1, R5SAVE_1, R5_1 + VPDI $0, R5_2, R5SAVE_2, R5_2 + VPDI $0, R5_3, R5SAVE_3, R5_3 + VPDI $0, R5_4, R5SAVE_4, R5_4 + + MOVD $0, R3 + BR multiply + +skip: + VZERO H_0 + VZERO H_1 + VZERO H_2 + VZERO H_3 + VZERO H_4 + + CMPBEQ R3, $0, finish + +b1: + // 1 block remaining + SUB $1, R3 + VLL R3, (R2), T_0 + ADD $1, R3 + MOVBZ $1, R0 + CMPBEQ R3, $16, 2(PC) + VLVGB R3, R0, T_0 + VZERO T_1 + EXPAND(T_0, T_1, F_0, F_1, F_2, F_3, F_4) + CMPBNE R3, $16, 2(PC) + VLEIB $4, $1, F_4 + VLEIG $1, $1, R_0 + VZERO R_1 + VZERO R_2 + VZERO R_3 + VZERO R_4 + VZERO R5_1 + VZERO R5_2 + VZERO R5_3 + VZERO R5_4 + + // setup [r, 1] + VLVGG $0, RSAVE_0, R_0 + VLVGG $0, RSAVE_1, R_1 + VLVGG $0, RSAVE_2, R_2 + VLVGG $0, RSAVE_3, R_3 + VLVGG $0, RSAVE_4, R_4 + VPDI $0, R5SAVE_1, R5_1, R5_1 + VPDI $0, R5SAVE_2, R5_2, R5_2 + VPDI $0, R5SAVE_3, R5_3, R5_3 + VPDI $0, R5SAVE_4, R5_4, R5_4 + + MOVD $0, R3 + BR multiply diff --git a/vendor/golang.org/x/crypto/poly1305/sum_vmsl_s390x.s b/vendor/golang.org/x/crypto/poly1305/sum_vmsl_s390x.s new file mode 100644 index 0000000..e60bbc1 --- /dev/null +++ b/vendor/golang.org/x/crypto/poly1305/sum_vmsl_s390x.s @@ -0,0 +1,909 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build s390x,go1.11,!gccgo,!appengine + +#include "textflag.h" + +// Implementation of Poly1305 using the vector facility (vx) and the VMSL instruction. + +// constants +#define EX0 V1 +#define EX1 V2 +#define EX2 V3 + +// temporaries +#define T_0 V4 +#define T_1 V5 +#define T_2 V6 +#define T_3 V7 +#define T_4 V8 +#define T_5 V9 +#define T_6 V10 +#define T_7 V11 +#define T_8 V12 +#define T_9 V13 +#define T_10 V14 + +// r**2 & r**4 +#define R_0 V15 +#define R_1 V16 +#define R_2 V17 +#define R5_1 V18 +#define R5_2 V19 +// key (r) +#define RSAVE_0 R7 +#define RSAVE_1 R8 +#define RSAVE_2 R9 +#define R5SAVE_1 R10 +#define R5SAVE_2 R11 + +// message block +#define M0 V20 +#define M1 V21 +#define M2 V22 +#define M3 V23 +#define M4 V24 +#define M5 V25 + +// accumulator +#define H0_0 V26 +#define H1_0 V27 +#define H2_0 V28 +#define H0_1 V29 +#define H1_1 V30 +#define H2_1 V31 + +GLOBL ·keyMask<>(SB), RODATA, $16 +DATA ·keyMask<>+0(SB)/8, $0xffffff0ffcffff0f +DATA ·keyMask<>+8(SB)/8, $0xfcffff0ffcffff0f + +GLOBL ·bswapMask<>(SB), RODATA, $16 +DATA ·bswapMask<>+0(SB)/8, $0x0f0e0d0c0b0a0908 +DATA ·bswapMask<>+8(SB)/8, $0x0706050403020100 + +GLOBL ·constants<>(SB), RODATA, $48 +// EX0 +DATA ·constants<>+0(SB)/8, $0x18191a1b1c1d1e1f +DATA ·constants<>+8(SB)/8, $0x0000050403020100 +// EX1 +DATA ·constants<>+16(SB)/8, $0x18191a1b1c1d1e1f +DATA ·constants<>+24(SB)/8, $0x00000a0908070605 +// EX2 +DATA ·constants<>+32(SB)/8, $0x18191a1b1c1d1e1f +DATA ·constants<>+40(SB)/8, $0x0000000f0e0d0c0b + +GLOBL ·c<>(SB), RODATA, $48 +// EX0 +DATA ·c<>+0(SB)/8, $0x0000050403020100 +DATA ·c<>+8(SB)/8, $0x0000151413121110 +// EX1 +DATA ·c<>+16(SB)/8, $0x00000a0908070605 +DATA ·c<>+24(SB)/8, $0x00001a1918171615 +// EX2 +DATA ·c<>+32(SB)/8, $0x0000000f0e0d0c0b +DATA ·c<>+40(SB)/8, $0x0000001f1e1d1c1b + +GLOBL ·reduce<>(SB), RODATA, $32 +// 44 bit +DATA ·reduce<>+0(SB)/8, $0x0 +DATA ·reduce<>+8(SB)/8, $0xfffffffffff +// 42 bit +DATA ·reduce<>+16(SB)/8, $0x0 +DATA ·reduce<>+24(SB)/8, $0x3ffffffffff + +// h = (f*g) % (2**130-5) [partial reduction] +// uses T_0...T_9 temporary registers +// input: m02_0, m02_1, m02_2, m13_0, m13_1, m13_2, r_0, r_1, r_2, r5_1, r5_2, m4_0, m4_1, m4_2, m5_0, m5_1, m5_2 +// temp: t0, t1, t2, t3, t4, t5, t6, t7, t8, t9 +// output: m02_0, m02_1, m02_2, m13_0, m13_1, m13_2 +#define MULTIPLY(m02_0, m02_1, m02_2, m13_0, m13_1, m13_2, r_0, r_1, r_2, r5_1, r5_2, m4_0, m4_1, m4_2, m5_0, m5_1, m5_2, t0, t1, t2, t3, t4, t5, t6, t7, t8, t9) \ + \ // Eliminate the dependency for the last 2 VMSLs + VMSLG m02_0, r_2, m4_2, m4_2 \ + VMSLG m13_0, r_2, m5_2, m5_2 \ // 8 VMSLs pipelined + VMSLG m02_0, r_0, m4_0, m4_0 \ + VMSLG m02_1, r5_2, V0, T_0 \ + VMSLG m02_0, r_1, m4_1, m4_1 \ + VMSLG m02_1, r_0, V0, T_1 \ + VMSLG m02_1, r_1, V0, T_2 \ + VMSLG m02_2, r5_1, V0, T_3 \ + VMSLG m02_2, r5_2, V0, T_4 \ + VMSLG m13_0, r_0, m5_0, m5_0 \ + VMSLG m13_1, r5_2, V0, T_5 \ + VMSLG m13_0, r_1, m5_1, m5_1 \ + VMSLG m13_1, r_0, V0, T_6 \ + VMSLG m13_1, r_1, V0, T_7 \ + VMSLG m13_2, r5_1, V0, T_8 \ + VMSLG m13_2, r5_2, V0, T_9 \ + VMSLG m02_2, r_0, m4_2, m4_2 \ + VMSLG m13_2, r_0, m5_2, m5_2 \ + VAQ m4_0, T_0, m02_0 \ + VAQ m4_1, T_1, m02_1 \ + VAQ m5_0, T_5, m13_0 \ + VAQ m5_1, T_6, m13_1 \ + VAQ m02_0, T_3, m02_0 \ + VAQ m02_1, T_4, m02_1 \ + VAQ m13_0, T_8, m13_0 \ + VAQ m13_1, T_9, m13_1 \ + VAQ m4_2, T_2, m02_2 \ + VAQ m5_2, T_7, m13_2 \ + +// SQUARE uses three limbs of r and r_2*5 to output square of r +// uses T_1, T_5 and T_7 temporary registers +// input: r_0, r_1, r_2, r5_2 +// temp: TEMP0, TEMP1, TEMP2 +// output: p0, p1, p2 +#define SQUARE(r_0, r_1, r_2, r5_2, p0, p1, p2, TEMP0, TEMP1, TEMP2) \ + VMSLG r_0, r_0, p0, p0 \ + VMSLG r_1, r5_2, V0, TEMP0 \ + VMSLG r_2, r5_2, p1, p1 \ + VMSLG r_0, r_1, V0, TEMP1 \ + VMSLG r_1, r_1, p2, p2 \ + VMSLG r_0, r_2, V0, TEMP2 \ + VAQ TEMP0, p0, p0 \ + VAQ TEMP1, p1, p1 \ + VAQ TEMP2, p2, p2 \ + VAQ TEMP0, p0, p0 \ + VAQ TEMP1, p1, p1 \ + VAQ TEMP2, p2, p2 \ + +// carry h0->h1->h2->h0 || h3->h4->h5->h3 +// uses T_2, T_4, T_5, T_7, T_8, T_9 +// t6, t7, t8, t9, t10, t11 +// input: h0, h1, h2, h3, h4, h5 +// temp: t0, t1, t2, t3, t4, t5, t6, t7, t8, t9, t10, t11 +// output: h0, h1, h2, h3, h4, h5 +#define REDUCE(h0, h1, h2, h3, h4, h5, t0, t1, t2, t3, t4, t5, t6, t7, t8, t9, t10, t11) \ + VLM (R12), t6, t7 \ // 44 and 42 bit clear mask + VLEIB $7, $0x28, t10 \ // 5 byte shift mask + VREPIB $4, t8 \ // 4 bit shift mask + VREPIB $2, t11 \ // 2 bit shift mask + VSRLB t10, h0, t0 \ // h0 byte shift + VSRLB t10, h1, t1 \ // h1 byte shift + VSRLB t10, h2, t2 \ // h2 byte shift + VSRLB t10, h3, t3 \ // h3 byte shift + VSRLB t10, h4, t4 \ // h4 byte shift + VSRLB t10, h5, t5 \ // h5 byte shift + VSRL t8, t0, t0 \ // h0 bit shift + VSRL t8, t1, t1 \ // h2 bit shift + VSRL t11, t2, t2 \ // h2 bit shift + VSRL t8, t3, t3 \ // h3 bit shift + VSRL t8, t4, t4 \ // h4 bit shift + VESLG $2, t2, t9 \ // h2 carry x5 + VSRL t11, t5, t5 \ // h5 bit shift + VN t6, h0, h0 \ // h0 clear carry + VAQ t2, t9, t2 \ // h2 carry x5 + VESLG $2, t5, t9 \ // h5 carry x5 + VN t6, h1, h1 \ // h1 clear carry + VN t7, h2, h2 \ // h2 clear carry + VAQ t5, t9, t5 \ // h5 carry x5 + VN t6, h3, h3 \ // h3 clear carry + VN t6, h4, h4 \ // h4 clear carry + VN t7, h5, h5 \ // h5 clear carry + VAQ t0, h1, h1 \ // h0->h1 + VAQ t3, h4, h4 \ // h3->h4 + VAQ t1, h2, h2 \ // h1->h2 + VAQ t4, h5, h5 \ // h4->h5 + VAQ t2, h0, h0 \ // h2->h0 + VAQ t5, h3, h3 \ // h5->h3 + VREPG $1, t6, t6 \ // 44 and 42 bit masks across both halves + VREPG $1, t7, t7 \ + VSLDB $8, h0, h0, h0 \ // set up [h0/1/2, h3/4/5] + VSLDB $8, h1, h1, h1 \ + VSLDB $8, h2, h2, h2 \ + VO h0, h3, h3 \ + VO h1, h4, h4 \ + VO h2, h5, h5 \ + VESRLG $44, h3, t0 \ // 44 bit shift right + VESRLG $44, h4, t1 \ + VESRLG $42, h5, t2 \ + VN t6, h3, h3 \ // clear carry bits + VN t6, h4, h4 \ + VN t7, h5, h5 \ + VESLG $2, t2, t9 \ // multiply carry by 5 + VAQ t9, t2, t2 \ + VAQ t0, h4, h4 \ + VAQ t1, h5, h5 \ + VAQ t2, h3, h3 \ + +// carry h0->h1->h2->h0 +// input: h0, h1, h2 +// temp: t0, t1, t2, t3, t4, t5, t6, t7, t8 +// output: h0, h1, h2 +#define REDUCE2(h0, h1, h2, t0, t1, t2, t3, t4, t5, t6, t7, t8) \ + VLEIB $7, $0x28, t3 \ // 5 byte shift mask + VREPIB $4, t4 \ // 4 bit shift mask + VREPIB $2, t7 \ // 2 bit shift mask + VGBM $0x003F, t5 \ // mask to clear carry bits + VSRLB t3, h0, t0 \ + VSRLB t3, h1, t1 \ + VSRLB t3, h2, t2 \ + VESRLG $4, t5, t5 \ // 44 bit clear mask + VSRL t4, t0, t0 \ + VSRL t4, t1, t1 \ + VSRL t7, t2, t2 \ + VESRLG $2, t5, t6 \ // 42 bit clear mask + VESLG $2, t2, t8 \ + VAQ t8, t2, t2 \ + VN t5, h0, h0 \ + VN t5, h1, h1 \ + VN t6, h2, h2 \ + VAQ t0, h1, h1 \ + VAQ t1, h2, h2 \ + VAQ t2, h0, h0 \ + VSRLB t3, h0, t0 \ + VSRLB t3, h1, t1 \ + VSRLB t3, h2, t2 \ + VSRL t4, t0, t0 \ + VSRL t4, t1, t1 \ + VSRL t7, t2, t2 \ + VN t5, h0, h0 \ + VN t5, h1, h1 \ + VESLG $2, t2, t8 \ + VN t6, h2, h2 \ + VAQ t0, h1, h1 \ + VAQ t8, t2, t2 \ + VAQ t1, h2, h2 \ + VAQ t2, h0, h0 \ + +// expands two message blocks into the lower halfs of the d registers +// moves the contents of the d registers into upper halfs +// input: in1, in2, d0, d1, d2, d3, d4, d5 +// temp: TEMP0, TEMP1, TEMP2, TEMP3 +// output: d0, d1, d2, d3, d4, d5 +#define EXPACC(in1, in2, d0, d1, d2, d3, d4, d5, TEMP0, TEMP1, TEMP2, TEMP3) \ + VGBM $0xff3f, TEMP0 \ + VGBM $0xff1f, TEMP1 \ + VESLG $4, d1, TEMP2 \ + VESLG $4, d4, TEMP3 \ + VESRLG $4, TEMP0, TEMP0 \ + VPERM in1, d0, EX0, d0 \ + VPERM in2, d3, EX0, d3 \ + VPERM in1, d2, EX2, d2 \ + VPERM in2, d5, EX2, d5 \ + VPERM in1, TEMP2, EX1, d1 \ + VPERM in2, TEMP3, EX1, d4 \ + VN TEMP0, d0, d0 \ + VN TEMP0, d3, d3 \ + VESRLG $4, d1, d1 \ + VESRLG $4, d4, d4 \ + VN TEMP1, d2, d2 \ + VN TEMP1, d5, d5 \ + VN TEMP0, d1, d1 \ + VN TEMP0, d4, d4 \ + +// expands one message block into the lower halfs of the d registers +// moves the contents of the d registers into upper halfs +// input: in, d0, d1, d2 +// temp: TEMP0, TEMP1, TEMP2 +// output: d0, d1, d2 +#define EXPACC2(in, d0, d1, d2, TEMP0, TEMP1, TEMP2) \ + VGBM $0xff3f, TEMP0 \ + VESLG $4, d1, TEMP2 \ + VGBM $0xff1f, TEMP1 \ + VPERM in, d0, EX0, d0 \ + VESRLG $4, TEMP0, TEMP0 \ + VPERM in, d2, EX2, d2 \ + VPERM in, TEMP2, EX1, d1 \ + VN TEMP0, d0, d0 \ + VN TEMP1, d2, d2 \ + VESRLG $4, d1, d1 \ + VN TEMP0, d1, d1 \ + +// pack h2:h0 into h1:h0 (no carry) +// input: h0, h1, h2 +// output: h0, h1, h2 +#define PACK(h0, h1, h2) \ + VMRLG h1, h2, h2 \ // copy h1 to upper half h2 + VESLG $44, h1, h1 \ // shift limb 1 44 bits, leaving 20 + VO h0, h1, h0 \ // combine h0 with 20 bits from limb 1 + VESRLG $20, h2, h1 \ // put top 24 bits of limb 1 into h1 + VLEIG $1, $0, h1 \ // clear h2 stuff from lower half of h1 + VO h0, h1, h0 \ // h0 now has 88 bits (limb 0 and 1) + VLEIG $0, $0, h2 \ // clear upper half of h2 + VESRLG $40, h2, h1 \ // h1 now has upper two bits of result + VLEIB $7, $88, h1 \ // for byte shift (11 bytes) + VSLB h1, h2, h2 \ // shift h2 11 bytes to the left + VO h0, h2, h0 \ // combine h0 with 20 bits from limb 1 + VLEIG $0, $0, h1 \ // clear upper half of h1 + +// if h > 2**130-5 then h -= 2**130-5 +// input: h0, h1 +// temp: t0, t1, t2 +// output: h0 +#define MOD(h0, h1, t0, t1, t2) \ + VZERO t0 \ + VLEIG $1, $5, t0 \ + VACCQ h0, t0, t1 \ + VAQ h0, t0, t0 \ + VONE t2 \ + VLEIG $1, $-4, t2 \ + VAQ t2, t1, t1 \ + VACCQ h1, t1, t1 \ + VONE t2 \ + VAQ t2, t1, t1 \ + VN h0, t1, t2 \ + VNC t0, t1, t1 \ + VO t1, t2, h0 \ + +// func poly1305vmsl(out *[16]byte, m *byte, mlen uint64, key *[32]key) +TEXT ·poly1305vmsl(SB), $0-32 + // This code processes 6 + up to 4 blocks (32 bytes) per iteration + // using the algorithm described in: + // NEON crypto, Daniel J. Bernstein & Peter Schwabe + // https://cryptojedi.org/papers/neoncrypto-20120320.pdf + // And as moddified for VMSL as described in + // Accelerating Poly1305 Cryptographic Message Authentication on the z14 + // O'Farrell et al, CASCON 2017, p48-55 + // https://ibm.ent.box.com/s/jf9gedj0e9d2vjctfyh186shaztavnht + + LMG out+0(FP), R1, R4 // R1=out, R2=m, R3=mlen, R4=key + VZERO V0 // c + + // load EX0, EX1 and EX2 + MOVD $·constants<>(SB), R5 + VLM (R5), EX0, EX2 // c + + // setup r + VL (R4), T_0 + MOVD $·keyMask<>(SB), R6 + VL (R6), T_1 + VN T_0, T_1, T_0 + VZERO T_2 // limbs for r + VZERO T_3 + VZERO T_4 + EXPACC2(T_0, T_2, T_3, T_4, T_1, T_5, T_7) + + // T_2, T_3, T_4: [0, r] + + // setup r*20 + VLEIG $0, $0, T_0 + VLEIG $1, $20, T_0 // T_0: [0, 20] + VZERO T_5 + VZERO T_6 + VMSLG T_0, T_3, T_5, T_5 + VMSLG T_0, T_4, T_6, T_6 + + // store r for final block in GR + VLGVG $1, T_2, RSAVE_0 // c + VLGVG $1, T_3, RSAVE_1 // c + VLGVG $1, T_4, RSAVE_2 // c + VLGVG $1, T_5, R5SAVE_1 // c + VLGVG $1, T_6, R5SAVE_2 // c + + // initialize h + VZERO H0_0 + VZERO H1_0 + VZERO H2_0 + VZERO H0_1 + VZERO H1_1 + VZERO H2_1 + + // initialize pointer for reduce constants + MOVD $·reduce<>(SB), R12 + + // calculate r**2 and 20*(r**2) + VZERO R_0 + VZERO R_1 + VZERO R_2 + SQUARE(T_2, T_3, T_4, T_6, R_0, R_1, R_2, T_1, T_5, T_7) + REDUCE2(R_0, R_1, R_2, M0, M1, M2, M3, M4, R5_1, R5_2, M5, T_1) + VZERO R5_1 + VZERO R5_2 + VMSLG T_0, R_1, R5_1, R5_1 + VMSLG T_0, R_2, R5_2, R5_2 + + // skip r**4 calculation if 3 blocks or less + CMPBLE R3, $48, b4 + + // calculate r**4 and 20*(r**4) + VZERO T_8 + VZERO T_9 + VZERO T_10 + SQUARE(R_0, R_1, R_2, R5_2, T_8, T_9, T_10, T_1, T_5, T_7) + REDUCE2(T_8, T_9, T_10, M0, M1, M2, M3, M4, T_2, T_3, M5, T_1) + VZERO T_2 + VZERO T_3 + VMSLG T_0, T_9, T_2, T_2 + VMSLG T_0, T_10, T_3, T_3 + + // put r**2 to the right and r**4 to the left of R_0, R_1, R_2 + VSLDB $8, T_8, T_8, T_8 + VSLDB $8, T_9, T_9, T_9 + VSLDB $8, T_10, T_10, T_10 + VSLDB $8, T_2, T_2, T_2 + VSLDB $8, T_3, T_3, T_3 + + VO T_8, R_0, R_0 + VO T_9, R_1, R_1 + VO T_10, R_2, R_2 + VO T_2, R5_1, R5_1 + VO T_3, R5_2, R5_2 + + CMPBLE R3, $80, load // less than or equal to 5 blocks in message + + // 6(or 5+1) blocks + SUB $81, R3 + VLM (R2), M0, M4 + VLL R3, 80(R2), M5 + ADD $1, R3 + MOVBZ $1, R0 + CMPBGE R3, $16, 2(PC) + VLVGB R3, R0, M5 + MOVD $96(R2), R2 + EXPACC(M0, M1, H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, T_0, T_1, T_2, T_3) + EXPACC(M2, M3, H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, T_0, T_1, T_2, T_3) + VLEIB $2, $1, H2_0 + VLEIB $2, $1, H2_1 + VLEIB $10, $1, H2_0 + VLEIB $10, $1, H2_1 + + VZERO M0 + VZERO M1 + VZERO M2 + VZERO M3 + VZERO T_4 + VZERO T_10 + EXPACC(M4, M5, M0, M1, M2, M3, T_4, T_10, T_0, T_1, T_2, T_3) + VLR T_4, M4 + VLEIB $10, $1, M2 + CMPBLT R3, $16, 2(PC) + VLEIB $10, $1, T_10 + MULTIPLY(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, R_0, R_1, R_2, R5_1, R5_2, M0, M1, M2, M3, M4, T_10, T_0, T_1, T_2, T_3, T_4, T_5, T_6, T_7, T_8, T_9) + REDUCE(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, T_10, M0, M1, M2, M3, M4, T_4, T_5, T_2, T_7, T_8, T_9) + VMRHG V0, H0_1, H0_0 + VMRHG V0, H1_1, H1_0 + VMRHG V0, H2_1, H2_0 + VMRLG V0, H0_1, H0_1 + VMRLG V0, H1_1, H1_1 + VMRLG V0, H2_1, H2_1 + + SUB $16, R3 + CMPBLE R3, $0, square + +load: + // load EX0, EX1 and EX2 + MOVD $·c<>(SB), R5 + VLM (R5), EX0, EX2 + +loop: + CMPBLE R3, $64, add // b4 // last 4 or less blocks left + + // next 4 full blocks + VLM (R2), M2, M5 + SUB $64, R3 + MOVD $64(R2), R2 + REDUCE(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, T_10, M0, M1, T_0, T_1, T_3, T_4, T_5, T_2, T_7, T_8, T_9) + + // expacc in-lined to create [m2, m3] limbs + VGBM $0x3f3f, T_0 // 44 bit clear mask + VGBM $0x1f1f, T_1 // 40 bit clear mask + VPERM M2, M3, EX0, T_3 + VESRLG $4, T_0, T_0 // 44 bit clear mask ready + VPERM M2, M3, EX1, T_4 + VPERM M2, M3, EX2, T_5 + VN T_0, T_3, T_3 + VESRLG $4, T_4, T_4 + VN T_1, T_5, T_5 + VN T_0, T_4, T_4 + VMRHG H0_1, T_3, H0_0 + VMRHG H1_1, T_4, H1_0 + VMRHG H2_1, T_5, H2_0 + VMRLG H0_1, T_3, H0_1 + VMRLG H1_1, T_4, H1_1 + VMRLG H2_1, T_5, H2_1 + VLEIB $10, $1, H2_0 + VLEIB $10, $1, H2_1 + VPERM M4, M5, EX0, T_3 + VPERM M4, M5, EX1, T_4 + VPERM M4, M5, EX2, T_5 + VN T_0, T_3, T_3 + VESRLG $4, T_4, T_4 + VN T_1, T_5, T_5 + VN T_0, T_4, T_4 + VMRHG V0, T_3, M0 + VMRHG V0, T_4, M1 + VMRHG V0, T_5, M2 + VMRLG V0, T_3, M3 + VMRLG V0, T_4, M4 + VMRLG V0, T_5, M5 + VLEIB $10, $1, M2 + VLEIB $10, $1, M5 + + MULTIPLY(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, R_0, R_1, R_2, R5_1, R5_2, M0, M1, M2, M3, M4, M5, T_0, T_1, T_2, T_3, T_4, T_5, T_6, T_7, T_8, T_9) + CMPBNE R3, $0, loop + REDUCE(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, T_10, M0, M1, M3, M4, M5, T_4, T_5, T_2, T_7, T_8, T_9) + VMRHG V0, H0_1, H0_0 + VMRHG V0, H1_1, H1_0 + VMRHG V0, H2_1, H2_0 + VMRLG V0, H0_1, H0_1 + VMRLG V0, H1_1, H1_1 + VMRLG V0, H2_1, H2_1 + + // load EX0, EX1, EX2 + MOVD $·constants<>(SB), R5 + VLM (R5), EX0, EX2 + + // sum vectors + VAQ H0_0, H0_1, H0_0 + VAQ H1_0, H1_1, H1_0 + VAQ H2_0, H2_1, H2_0 + + // h may be >= 2*(2**130-5) so we need to reduce it again + // M0...M4 are used as temps here + REDUCE2(H0_0, H1_0, H2_0, M0, M1, M2, M3, M4, T_9, T_10, H0_1, M5) + +next: // carry h1->h2 + VLEIB $7, $0x28, T_1 + VREPIB $4, T_2 + VGBM $0x003F, T_3 + VESRLG $4, T_3 + + // byte shift + VSRLB T_1, H1_0, T_4 + + // bit shift + VSRL T_2, T_4, T_4 + + // clear h1 carry bits + VN T_3, H1_0, H1_0 + + // add carry + VAQ T_4, H2_0, H2_0 + + // h is now < 2*(2**130-5) + // pack h into h1 (hi) and h0 (lo) + PACK(H0_0, H1_0, H2_0) + + // if h > 2**130-5 then h -= 2**130-5 + MOD(H0_0, H1_0, T_0, T_1, T_2) + + // h += s + MOVD $·bswapMask<>(SB), R5 + VL (R5), T_1 + VL 16(R4), T_0 + VPERM T_0, T_0, T_1, T_0 // reverse bytes (to big) + VAQ T_0, H0_0, H0_0 + VPERM H0_0, H0_0, T_1, H0_0 // reverse bytes (to little) + VST H0_0, (R1) + RET + +add: + // load EX0, EX1, EX2 + MOVD $·constants<>(SB), R5 + VLM (R5), EX0, EX2 + + REDUCE(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, T_10, M0, M1, M3, M4, M5, T_4, T_5, T_2, T_7, T_8, T_9) + VMRHG V0, H0_1, H0_0 + VMRHG V0, H1_1, H1_0 + VMRHG V0, H2_1, H2_0 + VMRLG V0, H0_1, H0_1 + VMRLG V0, H1_1, H1_1 + VMRLG V0, H2_1, H2_1 + CMPBLE R3, $64, b4 + +b4: + CMPBLE R3, $48, b3 // 3 blocks or less + + // 4(3+1) blocks remaining + SUB $49, R3 + VLM (R2), M0, M2 + VLL R3, 48(R2), M3 + ADD $1, R3 + MOVBZ $1, R0 + CMPBEQ R3, $16, 2(PC) + VLVGB R3, R0, M3 + MOVD $64(R2), R2 + EXPACC(M0, M1, H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, T_0, T_1, T_2, T_3) + VLEIB $10, $1, H2_0 + VLEIB $10, $1, H2_1 + VZERO M0 + VZERO M1 + VZERO M4 + VZERO M5 + VZERO T_4 + VZERO T_10 + EXPACC(M2, M3, M0, M1, M4, M5, T_4, T_10, T_0, T_1, T_2, T_3) + VLR T_4, M2 + VLEIB $10, $1, M4 + CMPBNE R3, $16, 2(PC) + VLEIB $10, $1, T_10 + MULTIPLY(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, R_0, R_1, R_2, R5_1, R5_2, M0, M1, M4, M5, M2, T_10, T_0, T_1, T_2, T_3, T_4, T_5, T_6, T_7, T_8, T_9) + REDUCE(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, T_10, M0, M1, M3, M4, M5, T_4, T_5, T_2, T_7, T_8, T_9) + VMRHG V0, H0_1, H0_0 + VMRHG V0, H1_1, H1_0 + VMRHG V0, H2_1, H2_0 + VMRLG V0, H0_1, H0_1 + VMRLG V0, H1_1, H1_1 + VMRLG V0, H2_1, H2_1 + SUB $16, R3 + CMPBLE R3, $0, square // this condition must always hold true! + +b3: + CMPBLE R3, $32, b2 + + // 3 blocks remaining + + // setup [r²,r] + VSLDB $8, R_0, R_0, R_0 + VSLDB $8, R_1, R_1, R_1 + VSLDB $8, R_2, R_2, R_2 + VSLDB $8, R5_1, R5_1, R5_1 + VSLDB $8, R5_2, R5_2, R5_2 + + VLVGG $1, RSAVE_0, R_0 + VLVGG $1, RSAVE_1, R_1 + VLVGG $1, RSAVE_2, R_2 + VLVGG $1, R5SAVE_1, R5_1 + VLVGG $1, R5SAVE_2, R5_2 + + // setup [h0, h1] + VSLDB $8, H0_0, H0_0, H0_0 + VSLDB $8, H1_0, H1_0, H1_0 + VSLDB $8, H2_0, H2_0, H2_0 + VO H0_1, H0_0, H0_0 + VO H1_1, H1_0, H1_0 + VO H2_1, H2_0, H2_0 + VZERO H0_1 + VZERO H1_1 + VZERO H2_1 + + VZERO M0 + VZERO M1 + VZERO M2 + VZERO M3 + VZERO M4 + VZERO M5 + + // H*[r**2, r] + MULTIPLY(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, R_0, R_1, R_2, R5_1, R5_2, M0, M1, M2, M3, M4, M5, T_0, T_1, T_2, T_3, T_4, T_5, T_6, T_7, T_8, T_9) + REDUCE2(H0_0, H1_0, H2_0, M0, M1, M2, M3, M4, H0_1, H1_1, T_10, M5) + + SUB $33, R3 + VLM (R2), M0, M1 + VLL R3, 32(R2), M2 + ADD $1, R3 + MOVBZ $1, R0 + CMPBEQ R3, $16, 2(PC) + VLVGB R3, R0, M2 + + // H += m0 + VZERO T_1 + VZERO T_2 + VZERO T_3 + EXPACC2(M0, T_1, T_2, T_3, T_4, T_5, T_6) + VLEIB $10, $1, T_3 + VAG H0_0, T_1, H0_0 + VAG H1_0, T_2, H1_0 + VAG H2_0, T_3, H2_0 + + VZERO M0 + VZERO M3 + VZERO M4 + VZERO M5 + VZERO T_10 + + // (H+m0)*r + MULTIPLY(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, R_0, R_1, R_2, R5_1, R5_2, M0, M3, M4, M5, V0, T_10, T_0, T_1, T_2, T_3, T_4, T_5, T_6, T_7, T_8, T_9) + REDUCE2(H0_0, H1_0, H2_0, M0, M3, M4, M5, T_10, H0_1, H1_1, H2_1, T_9) + + // H += m1 + VZERO V0 + VZERO T_1 + VZERO T_2 + VZERO T_3 + EXPACC2(M1, T_1, T_2, T_3, T_4, T_5, T_6) + VLEIB $10, $1, T_3 + VAQ H0_0, T_1, H0_0 + VAQ H1_0, T_2, H1_0 + VAQ H2_0, T_3, H2_0 + REDUCE2(H0_0, H1_0, H2_0, M0, M3, M4, M5, T_9, H0_1, H1_1, H2_1, T_10) + + // [H, m2] * [r**2, r] + EXPACC2(M2, H0_0, H1_0, H2_0, T_1, T_2, T_3) + CMPBNE R3, $16, 2(PC) + VLEIB $10, $1, H2_0 + VZERO M0 + VZERO M1 + VZERO M2 + VZERO M3 + VZERO M4 + VZERO M5 + MULTIPLY(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, R_0, R_1, R_2, R5_1, R5_2, M0, M1, M2, M3, M4, M5, T_0, T_1, T_2, T_3, T_4, T_5, T_6, T_7, T_8, T_9) + REDUCE2(H0_0, H1_0, H2_0, M0, M1, M2, M3, M4, H0_1, H1_1, M5, T_10) + SUB $16, R3 + CMPBLE R3, $0, next // this condition must always hold true! + +b2: + CMPBLE R3, $16, b1 + + // 2 blocks remaining + + // setup [r²,r] + VSLDB $8, R_0, R_0, R_0 + VSLDB $8, R_1, R_1, R_1 + VSLDB $8, R_2, R_2, R_2 + VSLDB $8, R5_1, R5_1, R5_1 + VSLDB $8, R5_2, R5_2, R5_2 + + VLVGG $1, RSAVE_0, R_0 + VLVGG $1, RSAVE_1, R_1 + VLVGG $1, RSAVE_2, R_2 + VLVGG $1, R5SAVE_1, R5_1 + VLVGG $1, R5SAVE_2, R5_2 + + // setup [h0, h1] + VSLDB $8, H0_0, H0_0, H0_0 + VSLDB $8, H1_0, H1_0, H1_0 + VSLDB $8, H2_0, H2_0, H2_0 + VO H0_1, H0_0, H0_0 + VO H1_1, H1_0, H1_0 + VO H2_1, H2_0, H2_0 + VZERO H0_1 + VZERO H1_1 + VZERO H2_1 + + VZERO M0 + VZERO M1 + VZERO M2 + VZERO M3 + VZERO M4 + VZERO M5 + + // H*[r**2, r] + MULTIPLY(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, R_0, R_1, R_2, R5_1, R5_2, M0, M1, M2, M3, M4, M5, T_0, T_1, T_2, T_3, T_4, T_5, T_6, T_7, T_8, T_9) + REDUCE(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, T_10, M0, M1, M2, M3, M4, T_4, T_5, T_2, T_7, T_8, T_9) + VMRHG V0, H0_1, H0_0 + VMRHG V0, H1_1, H1_0 + VMRHG V0, H2_1, H2_0 + VMRLG V0, H0_1, H0_1 + VMRLG V0, H1_1, H1_1 + VMRLG V0, H2_1, H2_1 + + // move h to the left and 0s at the right + VSLDB $8, H0_0, H0_0, H0_0 + VSLDB $8, H1_0, H1_0, H1_0 + VSLDB $8, H2_0, H2_0, H2_0 + + // get message blocks and append 1 to start + SUB $17, R3 + VL (R2), M0 + VLL R3, 16(R2), M1 + ADD $1, R3 + MOVBZ $1, R0 + CMPBEQ R3, $16, 2(PC) + VLVGB R3, R0, M1 + VZERO T_6 + VZERO T_7 + VZERO T_8 + EXPACC2(M0, T_6, T_7, T_8, T_1, T_2, T_3) + EXPACC2(M1, T_6, T_7, T_8, T_1, T_2, T_3) + VLEIB $2, $1, T_8 + CMPBNE R3, $16, 2(PC) + VLEIB $10, $1, T_8 + + // add [m0, m1] to h + VAG H0_0, T_6, H0_0 + VAG H1_0, T_7, H1_0 + VAG H2_0, T_8, H2_0 + + VZERO M2 + VZERO M3 + VZERO M4 + VZERO M5 + VZERO T_10 + VZERO M0 + + // at this point R_0 .. R5_2 look like [r**2, r] + MULTIPLY(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, R_0, R_1, R_2, R5_1, R5_2, M2, M3, M4, M5, T_10, M0, T_0, T_1, T_2, T_3, T_4, T_5, T_6, T_7, T_8, T_9) + REDUCE2(H0_0, H1_0, H2_0, M2, M3, M4, M5, T_9, H0_1, H1_1, H2_1, T_10) + SUB $16, R3, R3 + CMPBLE R3, $0, next + +b1: + CMPBLE R3, $0, next + + // 1 block remaining + + // setup [r²,r] + VSLDB $8, R_0, R_0, R_0 + VSLDB $8, R_1, R_1, R_1 + VSLDB $8, R_2, R_2, R_2 + VSLDB $8, R5_1, R5_1, R5_1 + VSLDB $8, R5_2, R5_2, R5_2 + + VLVGG $1, RSAVE_0, R_0 + VLVGG $1, RSAVE_1, R_1 + VLVGG $1, RSAVE_2, R_2 + VLVGG $1, R5SAVE_1, R5_1 + VLVGG $1, R5SAVE_2, R5_2 + + // setup [h0, h1] + VSLDB $8, H0_0, H0_0, H0_0 + VSLDB $8, H1_0, H1_0, H1_0 + VSLDB $8, H2_0, H2_0, H2_0 + VO H0_1, H0_0, H0_0 + VO H1_1, H1_0, H1_0 + VO H2_1, H2_0, H2_0 + VZERO H0_1 + VZERO H1_1 + VZERO H2_1 + + VZERO M0 + VZERO M1 + VZERO M2 + VZERO M3 + VZERO M4 + VZERO M5 + + // H*[r**2, r] + MULTIPLY(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, R_0, R_1, R_2, R5_1, R5_2, M0, M1, M2, M3, M4, M5, T_0, T_1, T_2, T_3, T_4, T_5, T_6, T_7, T_8, T_9) + REDUCE2(H0_0, H1_0, H2_0, M0, M1, M2, M3, M4, T_9, T_10, H0_1, M5) + + // set up [0, m0] limbs + SUB $1, R3 + VLL R3, (R2), M0 + ADD $1, R3 + MOVBZ $1, R0 + CMPBEQ R3, $16, 2(PC) + VLVGB R3, R0, M0 + VZERO T_1 + VZERO T_2 + VZERO T_3 + EXPACC2(M0, T_1, T_2, T_3, T_4, T_5, T_6)// limbs: [0, m] + CMPBNE R3, $16, 2(PC) + VLEIB $10, $1, T_3 + + // h+m0 + VAQ H0_0, T_1, H0_0 + VAQ H1_0, T_2, H1_0 + VAQ H2_0, T_3, H2_0 + + VZERO M0 + VZERO M1 + VZERO M2 + VZERO M3 + VZERO M4 + VZERO M5 + MULTIPLY(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, R_0, R_1, R_2, R5_1, R5_2, M0, M1, M2, M3, M4, M5, T_0, T_1, T_2, T_3, T_4, T_5, T_6, T_7, T_8, T_9) + REDUCE2(H0_0, H1_0, H2_0, M0, M1, M2, M3, M4, T_9, T_10, H0_1, M5) + + BR next + +square: + // setup [r²,r] + VSLDB $8, R_0, R_0, R_0 + VSLDB $8, R_1, R_1, R_1 + VSLDB $8, R_2, R_2, R_2 + VSLDB $8, R5_1, R5_1, R5_1 + VSLDB $8, R5_2, R5_2, R5_2 + + VLVGG $1, RSAVE_0, R_0 + VLVGG $1, RSAVE_1, R_1 + VLVGG $1, RSAVE_2, R_2 + VLVGG $1, R5SAVE_1, R5_1 + VLVGG $1, R5SAVE_2, R5_2 + + // setup [h0, h1] + VSLDB $8, H0_0, H0_0, H0_0 + VSLDB $8, H1_0, H1_0, H1_0 + VSLDB $8, H2_0, H2_0, H2_0 + VO H0_1, H0_0, H0_0 + VO H1_1, H1_0, H1_0 + VO H2_1, H2_0, H2_0 + VZERO H0_1 + VZERO H1_1 + VZERO H2_1 + + VZERO M0 + VZERO M1 + VZERO M2 + VZERO M3 + VZERO M4 + VZERO M5 + + // (h0*r**2) + (h1*r) + MULTIPLY(H0_0, H1_0, H2_0, H0_1, H1_1, H2_1, R_0, R_1, R_2, R5_1, R5_2, M0, M1, M2, M3, M4, M5, T_0, T_1, T_2, T_3, T_4, T_5, T_6, T_7, T_8, T_9) + REDUCE2(H0_0, H1_0, H2_0, M0, M1, M2, M3, M4, T_9, T_10, H0_1, M5) + BR next diff --git a/vendor/golang.org/x/crypto/ssh/buffer.go b/vendor/golang.org/x/crypto/ssh/buffer.go new file mode 100644 index 0000000..1ab07d0 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/buffer.go @@ -0,0 +1,97 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "io" + "sync" +) + +// buffer provides a linked list buffer for data exchange +// between producer and consumer. Theoretically the buffer is +// of unlimited capacity as it does no allocation of its own. +type buffer struct { + // protects concurrent access to head, tail and closed + *sync.Cond + + head *element // the buffer that will be read first + tail *element // the buffer that will be read last + + closed bool +} + +// An element represents a single link in a linked list. +type element struct { + buf []byte + next *element +} + +// newBuffer returns an empty buffer that is not closed. +func newBuffer() *buffer { + e := new(element) + b := &buffer{ + Cond: newCond(), + head: e, + tail: e, + } + return b +} + +// write makes buf available for Read to receive. +// buf must not be modified after the call to write. +func (b *buffer) write(buf []byte) { + b.Cond.L.Lock() + e := &element{buf: buf} + b.tail.next = e + b.tail = e + b.Cond.Signal() + b.Cond.L.Unlock() +} + +// eof closes the buffer. Reads from the buffer once all +// the data has been consumed will receive io.EOF. +func (b *buffer) eof() { + b.Cond.L.Lock() + b.closed = true + b.Cond.Signal() + b.Cond.L.Unlock() +} + +// Read reads data from the internal buffer in buf. Reads will block +// if no data is available, or until the buffer is closed. +func (b *buffer) Read(buf []byte) (n int, err error) { + b.Cond.L.Lock() + defer b.Cond.L.Unlock() + + for len(buf) > 0 { + // if there is data in b.head, copy it + if len(b.head.buf) > 0 { + r := copy(buf, b.head.buf) + buf, b.head.buf = buf[r:], b.head.buf[r:] + n += r + continue + } + // if there is a next buffer, make it the head + if len(b.head.buf) == 0 && b.head != b.tail { + b.head = b.head.next + continue + } + + // if at least one byte has been copied, return + if n > 0 { + break + } + + // if nothing was read, and there is nothing outstanding + // check to see if the buffer is closed. + if b.closed { + err = io.EOF + break + } + // out of buffers, wait for producer + b.Cond.Wait() + } + return +} diff --git a/vendor/golang.org/x/crypto/ssh/certs.go b/vendor/golang.org/x/crypto/ssh/certs.go new file mode 100644 index 0000000..00ed992 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/certs.go @@ -0,0 +1,535 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "bytes" + "errors" + "fmt" + "io" + "net" + "sort" + "time" +) + +// These constants from [PROTOCOL.certkeys] represent the algorithm names +// for certificate types supported by this package. +const ( + CertAlgoRSAv01 = "ssh-rsa-cert-v01@openssh.com" + CertAlgoDSAv01 = "ssh-dss-cert-v01@openssh.com" + CertAlgoECDSA256v01 = "ecdsa-sha2-nistp256-cert-v01@openssh.com" + CertAlgoECDSA384v01 = "ecdsa-sha2-nistp384-cert-v01@openssh.com" + CertAlgoECDSA521v01 = "ecdsa-sha2-nistp521-cert-v01@openssh.com" + CertAlgoED25519v01 = "ssh-ed25519-cert-v01@openssh.com" +) + +// Certificate types distinguish between host and user +// certificates. The values can be set in the CertType field of +// Certificate. +const ( + UserCert = 1 + HostCert = 2 +) + +// Signature represents a cryptographic signature. +type Signature struct { + Format string + Blob []byte +} + +// CertTimeInfinity can be used for OpenSSHCertV01.ValidBefore to indicate that +// a certificate does not expire. +const CertTimeInfinity = 1<<64 - 1 + +// An Certificate represents an OpenSSH certificate as defined in +// [PROTOCOL.certkeys]?rev=1.8. The Certificate type implements the +// PublicKey interface, so it can be unmarshaled using +// ParsePublicKey. +type Certificate struct { + Nonce []byte + Key PublicKey + Serial uint64 + CertType uint32 + KeyId string + ValidPrincipals []string + ValidAfter uint64 + ValidBefore uint64 + Permissions + Reserved []byte + SignatureKey PublicKey + Signature *Signature +} + +// genericCertData holds the key-independent part of the certificate data. +// Overall, certificates contain an nonce, public key fields and +// key-independent fields. +type genericCertData struct { + Serial uint64 + CertType uint32 + KeyId string + ValidPrincipals []byte + ValidAfter uint64 + ValidBefore uint64 + CriticalOptions []byte + Extensions []byte + Reserved []byte + SignatureKey []byte + Signature []byte +} + +func marshalStringList(namelist []string) []byte { + var to []byte + for _, name := range namelist { + s := struct{ N string }{name} + to = append(to, Marshal(&s)...) + } + return to +} + +type optionsTuple struct { + Key string + Value []byte +} + +type optionsTupleValue struct { + Value string +} + +// serialize a map of critical options or extensions +// issue #10569 - per [PROTOCOL.certkeys] and SSH implementation, +// we need two length prefixes for a non-empty string value +func marshalTuples(tups map[string]string) []byte { + keys := make([]string, 0, len(tups)) + for key := range tups { + keys = append(keys, key) + } + sort.Strings(keys) + + var ret []byte + for _, key := range keys { + s := optionsTuple{Key: key} + if value := tups[key]; len(value) > 0 { + s.Value = Marshal(&optionsTupleValue{value}) + } + ret = append(ret, Marshal(&s)...) + } + return ret +} + +// issue #10569 - per [PROTOCOL.certkeys] and SSH implementation, +// we need two length prefixes for a non-empty option value +func parseTuples(in []byte) (map[string]string, error) { + tups := map[string]string{} + var lastKey string + var haveLastKey bool + + for len(in) > 0 { + var key, val, extra []byte + var ok bool + + if key, in, ok = parseString(in); !ok { + return nil, errShortRead + } + keyStr := string(key) + // according to [PROTOCOL.certkeys], the names must be in + // lexical order. + if haveLastKey && keyStr <= lastKey { + return nil, fmt.Errorf("ssh: certificate options are not in lexical order") + } + lastKey, haveLastKey = keyStr, true + // the next field is a data field, which if non-empty has a string embedded + if val, in, ok = parseString(in); !ok { + return nil, errShortRead + } + if len(val) > 0 { + val, extra, ok = parseString(val) + if !ok { + return nil, errShortRead + } + if len(extra) > 0 { + return nil, fmt.Errorf("ssh: unexpected trailing data after certificate option value") + } + tups[keyStr] = string(val) + } else { + tups[keyStr] = "" + } + } + return tups, nil +} + +func parseCert(in []byte, privAlgo string) (*Certificate, error) { + nonce, rest, ok := parseString(in) + if !ok { + return nil, errShortRead + } + + key, rest, err := parsePubKey(rest, privAlgo) + if err != nil { + return nil, err + } + + var g genericCertData + if err := Unmarshal(rest, &g); err != nil { + return nil, err + } + + c := &Certificate{ + Nonce: nonce, + Key: key, + Serial: g.Serial, + CertType: g.CertType, + KeyId: g.KeyId, + ValidAfter: g.ValidAfter, + ValidBefore: g.ValidBefore, + } + + for principals := g.ValidPrincipals; len(principals) > 0; { + principal, rest, ok := parseString(principals) + if !ok { + return nil, errShortRead + } + c.ValidPrincipals = append(c.ValidPrincipals, string(principal)) + principals = rest + } + + c.CriticalOptions, err = parseTuples(g.CriticalOptions) + if err != nil { + return nil, err + } + c.Extensions, err = parseTuples(g.Extensions) + if err != nil { + return nil, err + } + c.Reserved = g.Reserved + k, err := ParsePublicKey(g.SignatureKey) + if err != nil { + return nil, err + } + + c.SignatureKey = k + c.Signature, rest, ok = parseSignatureBody(g.Signature) + if !ok || len(rest) > 0 { + return nil, errors.New("ssh: signature parse error") + } + + return c, nil +} + +type openSSHCertSigner struct { + pub *Certificate + signer Signer +} + +type algorithmOpenSSHCertSigner struct { + *openSSHCertSigner + algorithmSigner AlgorithmSigner +} + +// NewCertSigner returns a Signer that signs with the given Certificate, whose +// private key is held by signer. It returns an error if the public key in cert +// doesn't match the key used by signer. +func NewCertSigner(cert *Certificate, signer Signer) (Signer, error) { + if bytes.Compare(cert.Key.Marshal(), signer.PublicKey().Marshal()) != 0 { + return nil, errors.New("ssh: signer and cert have different public key") + } + + if algorithmSigner, ok := signer.(AlgorithmSigner); ok { + return &algorithmOpenSSHCertSigner{ + &openSSHCertSigner{cert, signer}, algorithmSigner}, nil + } else { + return &openSSHCertSigner{cert, signer}, nil + } +} + +func (s *openSSHCertSigner) Sign(rand io.Reader, data []byte) (*Signature, error) { + return s.signer.Sign(rand, data) +} + +func (s *openSSHCertSigner) PublicKey() PublicKey { + return s.pub +} + +func (s *algorithmOpenSSHCertSigner) SignWithAlgorithm(rand io.Reader, data []byte, algorithm string) (*Signature, error) { + return s.algorithmSigner.SignWithAlgorithm(rand, data, algorithm) +} + +const sourceAddressCriticalOption = "source-address" + +// CertChecker does the work of verifying a certificate. Its methods +// can be plugged into ClientConfig.HostKeyCallback and +// ServerConfig.PublicKeyCallback. For the CertChecker to work, +// minimally, the IsAuthority callback should be set. +type CertChecker struct { + // SupportedCriticalOptions lists the CriticalOptions that the + // server application layer understands. These are only used + // for user certificates. + SupportedCriticalOptions []string + + // IsUserAuthority should return true if the key is recognized as an + // authority for the given user certificate. This allows for + // certificates to be signed by other certificates. This must be set + // if this CertChecker will be checking user certificates. + IsUserAuthority func(auth PublicKey) bool + + // IsHostAuthority should report whether the key is recognized as + // an authority for this host. This allows for certificates to be + // signed by other keys, and for those other keys to only be valid + // signers for particular hostnames. This must be set if this + // CertChecker will be checking host certificates. + IsHostAuthority func(auth PublicKey, address string) bool + + // Clock is used for verifying time stamps. If nil, time.Now + // is used. + Clock func() time.Time + + // UserKeyFallback is called when CertChecker.Authenticate encounters a + // public key that is not a certificate. It must implement validation + // of user keys or else, if nil, all such keys are rejected. + UserKeyFallback func(conn ConnMetadata, key PublicKey) (*Permissions, error) + + // HostKeyFallback is called when CertChecker.CheckHostKey encounters a + // public key that is not a certificate. It must implement host key + // validation or else, if nil, all such keys are rejected. + HostKeyFallback HostKeyCallback + + // IsRevoked is called for each certificate so that revocation checking + // can be implemented. It should return true if the given certificate + // is revoked and false otherwise. If nil, no certificates are + // considered to have been revoked. + IsRevoked func(cert *Certificate) bool +} + +// CheckHostKey checks a host key certificate. This method can be +// plugged into ClientConfig.HostKeyCallback. +func (c *CertChecker) CheckHostKey(addr string, remote net.Addr, key PublicKey) error { + cert, ok := key.(*Certificate) + if !ok { + if c.HostKeyFallback != nil { + return c.HostKeyFallback(addr, remote, key) + } + return errors.New("ssh: non-certificate host key") + } + if cert.CertType != HostCert { + return fmt.Errorf("ssh: certificate presented as a host key has type %d", cert.CertType) + } + if !c.IsHostAuthority(cert.SignatureKey, addr) { + return fmt.Errorf("ssh: no authorities for hostname: %v", addr) + } + + hostname, _, err := net.SplitHostPort(addr) + if err != nil { + return err + } + + // Pass hostname only as principal for host certificates (consistent with OpenSSH) + return c.CheckCert(hostname, cert) +} + +// Authenticate checks a user certificate. Authenticate can be used as +// a value for ServerConfig.PublicKeyCallback. +func (c *CertChecker) Authenticate(conn ConnMetadata, pubKey PublicKey) (*Permissions, error) { + cert, ok := pubKey.(*Certificate) + if !ok { + if c.UserKeyFallback != nil { + return c.UserKeyFallback(conn, pubKey) + } + return nil, errors.New("ssh: normal key pairs not accepted") + } + + if cert.CertType != UserCert { + return nil, fmt.Errorf("ssh: cert has type %d", cert.CertType) + } + if !c.IsUserAuthority(cert.SignatureKey) { + return nil, fmt.Errorf("ssh: certificate signed by unrecognized authority") + } + + if err := c.CheckCert(conn.User(), cert); err != nil { + return nil, err + } + + return &cert.Permissions, nil +} + +// CheckCert checks CriticalOptions, ValidPrincipals, revocation, timestamp and +// the signature of the certificate. +func (c *CertChecker) CheckCert(principal string, cert *Certificate) error { + if c.IsRevoked != nil && c.IsRevoked(cert) { + return fmt.Errorf("ssh: certificate serial %d revoked", cert.Serial) + } + + for opt := range cert.CriticalOptions { + // sourceAddressCriticalOption will be enforced by + // serverAuthenticate + if opt == sourceAddressCriticalOption { + continue + } + + found := false + for _, supp := range c.SupportedCriticalOptions { + if supp == opt { + found = true + break + } + } + if !found { + return fmt.Errorf("ssh: unsupported critical option %q in certificate", opt) + } + } + + if len(cert.ValidPrincipals) > 0 { + // By default, certs are valid for all users/hosts. + found := false + for _, p := range cert.ValidPrincipals { + if p == principal { + found = true + break + } + } + if !found { + return fmt.Errorf("ssh: principal %q not in the set of valid principals for given certificate: %q", principal, cert.ValidPrincipals) + } + } + + clock := c.Clock + if clock == nil { + clock = time.Now + } + + unixNow := clock().Unix() + if after := int64(cert.ValidAfter); after < 0 || unixNow < int64(cert.ValidAfter) { + return fmt.Errorf("ssh: cert is not yet valid") + } + if before := int64(cert.ValidBefore); cert.ValidBefore != uint64(CertTimeInfinity) && (unixNow >= before || before < 0) { + return fmt.Errorf("ssh: cert has expired") + } + if err := cert.SignatureKey.Verify(cert.bytesForSigning(), cert.Signature); err != nil { + return fmt.Errorf("ssh: certificate signature does not verify") + } + + return nil +} + +// SignCert sets c.SignatureKey to the authority's public key and stores a +// Signature, by authority, in the certificate. +func (c *Certificate) SignCert(rand io.Reader, authority Signer) error { + c.Nonce = make([]byte, 32) + if _, err := io.ReadFull(rand, c.Nonce); err != nil { + return err + } + c.SignatureKey = authority.PublicKey() + + sig, err := authority.Sign(rand, c.bytesForSigning()) + if err != nil { + return err + } + c.Signature = sig + return nil +} + +var certAlgoNames = map[string]string{ + KeyAlgoRSA: CertAlgoRSAv01, + KeyAlgoDSA: CertAlgoDSAv01, + KeyAlgoECDSA256: CertAlgoECDSA256v01, + KeyAlgoECDSA384: CertAlgoECDSA384v01, + KeyAlgoECDSA521: CertAlgoECDSA521v01, + KeyAlgoED25519: CertAlgoED25519v01, +} + +// certToPrivAlgo returns the underlying algorithm for a certificate algorithm. +// Panics if a non-certificate algorithm is passed. +func certToPrivAlgo(algo string) string { + for privAlgo, pubAlgo := range certAlgoNames { + if pubAlgo == algo { + return privAlgo + } + } + panic("unknown cert algorithm") +} + +func (cert *Certificate) bytesForSigning() []byte { + c2 := *cert + c2.Signature = nil + out := c2.Marshal() + // Drop trailing signature length. + return out[:len(out)-4] +} + +// Marshal serializes c into OpenSSH's wire format. It is part of the +// PublicKey interface. +func (c *Certificate) Marshal() []byte { + generic := genericCertData{ + Serial: c.Serial, + CertType: c.CertType, + KeyId: c.KeyId, + ValidPrincipals: marshalStringList(c.ValidPrincipals), + ValidAfter: uint64(c.ValidAfter), + ValidBefore: uint64(c.ValidBefore), + CriticalOptions: marshalTuples(c.CriticalOptions), + Extensions: marshalTuples(c.Extensions), + Reserved: c.Reserved, + SignatureKey: c.SignatureKey.Marshal(), + } + if c.Signature != nil { + generic.Signature = Marshal(c.Signature) + } + genericBytes := Marshal(&generic) + keyBytes := c.Key.Marshal() + _, keyBytes, _ = parseString(keyBytes) + prefix := Marshal(&struct { + Name string + Nonce []byte + Key []byte `ssh:"rest"` + }{c.Type(), c.Nonce, keyBytes}) + + result := make([]byte, 0, len(prefix)+len(genericBytes)) + result = append(result, prefix...) + result = append(result, genericBytes...) + return result +} + +// Type returns the key name. It is part of the PublicKey interface. +func (c *Certificate) Type() string { + algo, ok := certAlgoNames[c.Key.Type()] + if !ok { + panic("unknown cert key type " + c.Key.Type()) + } + return algo +} + +// Verify verifies a signature against the certificate's public +// key. It is part of the PublicKey interface. +func (c *Certificate) Verify(data []byte, sig *Signature) error { + return c.Key.Verify(data, sig) +} + +func parseSignatureBody(in []byte) (out *Signature, rest []byte, ok bool) { + format, in, ok := parseString(in) + if !ok { + return + } + + out = &Signature{ + Format: string(format), + } + + if out.Blob, in, ok = parseString(in); !ok { + return + } + + return out, in, ok +} + +func parseSignature(in []byte) (out *Signature, rest []byte, ok bool) { + sigBytes, rest, ok := parseString(in) + if !ok { + return + } + + out, trailing, ok := parseSignatureBody(sigBytes) + if !ok || len(trailing) > 0 { + return nil, nil, false + } + return +} diff --git a/vendor/golang.org/x/crypto/ssh/channel.go b/vendor/golang.org/x/crypto/ssh/channel.go new file mode 100644 index 0000000..c0834c0 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/channel.go @@ -0,0 +1,633 @@ +// Copyright 2011 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "encoding/binary" + "errors" + "fmt" + "io" + "log" + "sync" +) + +const ( + minPacketLength = 9 + // channelMaxPacket contains the maximum number of bytes that will be + // sent in a single packet. As per RFC 4253, section 6.1, 32k is also + // the minimum. + channelMaxPacket = 1 << 15 + // We follow OpenSSH here. + channelWindowSize = 64 * channelMaxPacket +) + +// NewChannel represents an incoming request to a channel. It must either be +// accepted for use by calling Accept, or rejected by calling Reject. +type NewChannel interface { + // Accept accepts the channel creation request. It returns the Channel + // and a Go channel containing SSH requests. The Go channel must be + // serviced otherwise the Channel will hang. + Accept() (Channel, <-chan *Request, error) + + // Reject rejects the channel creation request. After calling + // this, no other methods on the Channel may be called. + Reject(reason RejectionReason, message string) error + + // ChannelType returns the type of the channel, as supplied by the + // client. + ChannelType() string + + // ExtraData returns the arbitrary payload for this channel, as supplied + // by the client. This data is specific to the channel type. + ExtraData() []byte +} + +// A Channel is an ordered, reliable, flow-controlled, duplex stream +// that is multiplexed over an SSH connection. +type Channel interface { + // Read reads up to len(data) bytes from the channel. + Read(data []byte) (int, error) + + // Write writes len(data) bytes to the channel. + Write(data []byte) (int, error) + + // Close signals end of channel use. No data may be sent after this + // call. + Close() error + + // CloseWrite signals the end of sending in-band + // data. Requests may still be sent, and the other side may + // still send data + CloseWrite() error + + // SendRequest sends a channel request. If wantReply is true, + // it will wait for a reply and return the result as a + // boolean, otherwise the return value will be false. Channel + // requests are out-of-band messages so they may be sent even + // if the data stream is closed or blocked by flow control. + // If the channel is closed before a reply is returned, io.EOF + // is returned. + SendRequest(name string, wantReply bool, payload []byte) (bool, error) + + // Stderr returns an io.ReadWriter that writes to this channel + // with the extended data type set to stderr. Stderr may + // safely be read and written from a different goroutine than + // Read and Write respectively. + Stderr() io.ReadWriter +} + +// Request is a request sent outside of the normal stream of +// data. Requests can either be specific to an SSH channel, or they +// can be global. +type Request struct { + Type string + WantReply bool + Payload []byte + + ch *channel + mux *mux +} + +// Reply sends a response to a request. It must be called for all requests +// where WantReply is true and is a no-op otherwise. The payload argument is +// ignored for replies to channel-specific requests. +func (r *Request) Reply(ok bool, payload []byte) error { + if !r.WantReply { + return nil + } + + if r.ch == nil { + return r.mux.ackRequest(ok, payload) + } + + return r.ch.ackRequest(ok) +} + +// RejectionReason is an enumeration used when rejecting channel creation +// requests. See RFC 4254, section 5.1. +type RejectionReason uint32 + +const ( + Prohibited RejectionReason = iota + 1 + ConnectionFailed + UnknownChannelType + ResourceShortage +) + +// String converts the rejection reason to human readable form. +func (r RejectionReason) String() string { + switch r { + case Prohibited: + return "administratively prohibited" + case ConnectionFailed: + return "connect failed" + case UnknownChannelType: + return "unknown channel type" + case ResourceShortage: + return "resource shortage" + } + return fmt.Sprintf("unknown reason %d", int(r)) +} + +func min(a uint32, b int) uint32 { + if a < uint32(b) { + return a + } + return uint32(b) +} + +type channelDirection uint8 + +const ( + channelInbound channelDirection = iota + channelOutbound +) + +// channel is an implementation of the Channel interface that works +// with the mux class. +type channel struct { + // R/O after creation + chanType string + extraData []byte + localId, remoteId uint32 + + // maxIncomingPayload and maxRemotePayload are the maximum + // payload sizes of normal and extended data packets for + // receiving and sending, respectively. The wire packet will + // be 9 or 13 bytes larger (excluding encryption overhead). + maxIncomingPayload uint32 + maxRemotePayload uint32 + + mux *mux + + // decided is set to true if an accept or reject message has been sent + // (for outbound channels) or received (for inbound channels). + decided bool + + // direction contains either channelOutbound, for channels created + // locally, or channelInbound, for channels created by the peer. + direction channelDirection + + // Pending internal channel messages. + msg chan interface{} + + // Since requests have no ID, there can be only one request + // with WantReply=true outstanding. This lock is held by a + // goroutine that has such an outgoing request pending. + sentRequestMu sync.Mutex + + incomingRequests chan *Request + + sentEOF bool + + // thread-safe data + remoteWin window + pending *buffer + extPending *buffer + + // windowMu protects myWindow, the flow-control window. + windowMu sync.Mutex + myWindow uint32 + + // writeMu serializes calls to mux.conn.writePacket() and + // protects sentClose and packetPool. This mutex must be + // different from windowMu, as writePacket can block if there + // is a key exchange pending. + writeMu sync.Mutex + sentClose bool + + // packetPool has a buffer for each extended channel ID to + // save allocations during writes. + packetPool map[uint32][]byte +} + +// writePacket sends a packet. If the packet is a channel close, it updates +// sentClose. This method takes the lock c.writeMu. +func (ch *channel) writePacket(packet []byte) error { + ch.writeMu.Lock() + if ch.sentClose { + ch.writeMu.Unlock() + return io.EOF + } + ch.sentClose = (packet[0] == msgChannelClose) + err := ch.mux.conn.writePacket(packet) + ch.writeMu.Unlock() + return err +} + +func (ch *channel) sendMessage(msg interface{}) error { + if debugMux { + log.Printf("send(%d): %#v", ch.mux.chanList.offset, msg) + } + + p := Marshal(msg) + binary.BigEndian.PutUint32(p[1:], ch.remoteId) + return ch.writePacket(p) +} + +// WriteExtended writes data to a specific extended stream. These streams are +// used, for example, for stderr. +func (ch *channel) WriteExtended(data []byte, extendedCode uint32) (n int, err error) { + if ch.sentEOF { + return 0, io.EOF + } + // 1 byte message type, 4 bytes remoteId, 4 bytes data length + opCode := byte(msgChannelData) + headerLength := uint32(9) + if extendedCode > 0 { + headerLength += 4 + opCode = msgChannelExtendedData + } + + ch.writeMu.Lock() + packet := ch.packetPool[extendedCode] + // We don't remove the buffer from packetPool, so + // WriteExtended calls from different goroutines will be + // flagged as errors by the race detector. + ch.writeMu.Unlock() + + for len(data) > 0 { + space := min(ch.maxRemotePayload, len(data)) + if space, err = ch.remoteWin.reserve(space); err != nil { + return n, err + } + if want := headerLength + space; uint32(cap(packet)) < want { + packet = make([]byte, want) + } else { + packet = packet[:want] + } + + todo := data[:space] + + packet[0] = opCode + binary.BigEndian.PutUint32(packet[1:], ch.remoteId) + if extendedCode > 0 { + binary.BigEndian.PutUint32(packet[5:], uint32(extendedCode)) + } + binary.BigEndian.PutUint32(packet[headerLength-4:], uint32(len(todo))) + copy(packet[headerLength:], todo) + if err = ch.writePacket(packet); err != nil { + return n, err + } + + n += len(todo) + data = data[len(todo):] + } + + ch.writeMu.Lock() + ch.packetPool[extendedCode] = packet + ch.writeMu.Unlock() + + return n, err +} + +func (ch *channel) handleData(packet []byte) error { + headerLen := 9 + isExtendedData := packet[0] == msgChannelExtendedData + if isExtendedData { + headerLen = 13 + } + if len(packet) < headerLen { + // malformed data packet + return parseError(packet[0]) + } + + var extended uint32 + if isExtendedData { + extended = binary.BigEndian.Uint32(packet[5:]) + } + + length := binary.BigEndian.Uint32(packet[headerLen-4 : headerLen]) + if length == 0 { + return nil + } + if length > ch.maxIncomingPayload { + // TODO(hanwen): should send Disconnect? + return errors.New("ssh: incoming packet exceeds maximum payload size") + } + + data := packet[headerLen:] + if length != uint32(len(data)) { + return errors.New("ssh: wrong packet length") + } + + ch.windowMu.Lock() + if ch.myWindow < length { + ch.windowMu.Unlock() + // TODO(hanwen): should send Disconnect with reason? + return errors.New("ssh: remote side wrote too much") + } + ch.myWindow -= length + ch.windowMu.Unlock() + + if extended == 1 { + ch.extPending.write(data) + } else if extended > 0 { + // discard other extended data. + } else { + ch.pending.write(data) + } + return nil +} + +func (c *channel) adjustWindow(n uint32) error { + c.windowMu.Lock() + // Since myWindow is managed on our side, and can never exceed + // the initial window setting, we don't worry about overflow. + c.myWindow += uint32(n) + c.windowMu.Unlock() + return c.sendMessage(windowAdjustMsg{ + AdditionalBytes: uint32(n), + }) +} + +func (c *channel) ReadExtended(data []byte, extended uint32) (n int, err error) { + switch extended { + case 1: + n, err = c.extPending.Read(data) + case 0: + n, err = c.pending.Read(data) + default: + return 0, fmt.Errorf("ssh: extended code %d unimplemented", extended) + } + + if n > 0 { + err = c.adjustWindow(uint32(n)) + // sendWindowAdjust can return io.EOF if the remote + // peer has closed the connection, however we want to + // defer forwarding io.EOF to the caller of Read until + // the buffer has been drained. + if n > 0 && err == io.EOF { + err = nil + } + } + + return n, err +} + +func (c *channel) close() { + c.pending.eof() + c.extPending.eof() + close(c.msg) + close(c.incomingRequests) + c.writeMu.Lock() + // This is not necessary for a normal channel teardown, but if + // there was another error, it is. + c.sentClose = true + c.writeMu.Unlock() + // Unblock writers. + c.remoteWin.close() +} + +// responseMessageReceived is called when a success or failure message is +// received on a channel to check that such a message is reasonable for the +// given channel. +func (ch *channel) responseMessageReceived() error { + if ch.direction == channelInbound { + return errors.New("ssh: channel response message received on inbound channel") + } + if ch.decided { + return errors.New("ssh: duplicate response received for channel") + } + ch.decided = true + return nil +} + +func (ch *channel) handlePacket(packet []byte) error { + switch packet[0] { + case msgChannelData, msgChannelExtendedData: + return ch.handleData(packet) + case msgChannelClose: + ch.sendMessage(channelCloseMsg{PeersID: ch.remoteId}) + ch.mux.chanList.remove(ch.localId) + ch.close() + return nil + case msgChannelEOF: + // RFC 4254 is mute on how EOF affects dataExt messages but + // it is logical to signal EOF at the same time. + ch.extPending.eof() + ch.pending.eof() + return nil + } + + decoded, err := decode(packet) + if err != nil { + return err + } + + switch msg := decoded.(type) { + case *channelOpenFailureMsg: + if err := ch.responseMessageReceived(); err != nil { + return err + } + ch.mux.chanList.remove(msg.PeersID) + ch.msg <- msg + case *channelOpenConfirmMsg: + if err := ch.responseMessageReceived(); err != nil { + return err + } + if msg.MaxPacketSize < minPacketLength || msg.MaxPacketSize > 1<<31 { + return fmt.Errorf("ssh: invalid MaxPacketSize %d from peer", msg.MaxPacketSize) + } + ch.remoteId = msg.MyID + ch.maxRemotePayload = msg.MaxPacketSize + ch.remoteWin.add(msg.MyWindow) + ch.msg <- msg + case *windowAdjustMsg: + if !ch.remoteWin.add(msg.AdditionalBytes) { + return fmt.Errorf("ssh: invalid window update for %d bytes", msg.AdditionalBytes) + } + case *channelRequestMsg: + req := Request{ + Type: msg.Request, + WantReply: msg.WantReply, + Payload: msg.RequestSpecificData, + ch: ch, + } + + ch.incomingRequests <- &req + default: + ch.msg <- msg + } + return nil +} + +func (m *mux) newChannel(chanType string, direction channelDirection, extraData []byte) *channel { + ch := &channel{ + remoteWin: window{Cond: newCond()}, + myWindow: channelWindowSize, + pending: newBuffer(), + extPending: newBuffer(), + direction: direction, + incomingRequests: make(chan *Request, chanSize), + msg: make(chan interface{}, chanSize), + chanType: chanType, + extraData: extraData, + mux: m, + packetPool: make(map[uint32][]byte), + } + ch.localId = m.chanList.add(ch) + return ch +} + +var errUndecided = errors.New("ssh: must Accept or Reject channel") +var errDecidedAlready = errors.New("ssh: can call Accept or Reject only once") + +type extChannel struct { + code uint32 + ch *channel +} + +func (e *extChannel) Write(data []byte) (n int, err error) { + return e.ch.WriteExtended(data, e.code) +} + +func (e *extChannel) Read(data []byte) (n int, err error) { + return e.ch.ReadExtended(data, e.code) +} + +func (ch *channel) Accept() (Channel, <-chan *Request, error) { + if ch.decided { + return nil, nil, errDecidedAlready + } + ch.maxIncomingPayload = channelMaxPacket + confirm := channelOpenConfirmMsg{ + PeersID: ch.remoteId, + MyID: ch.localId, + MyWindow: ch.myWindow, + MaxPacketSize: ch.maxIncomingPayload, + } + ch.decided = true + if err := ch.sendMessage(confirm); err != nil { + return nil, nil, err + } + + return ch, ch.incomingRequests, nil +} + +func (ch *channel) Reject(reason RejectionReason, message string) error { + if ch.decided { + return errDecidedAlready + } + reject := channelOpenFailureMsg{ + PeersID: ch.remoteId, + Reason: reason, + Message: message, + Language: "en", + } + ch.decided = true + return ch.sendMessage(reject) +} + +func (ch *channel) Read(data []byte) (int, error) { + if !ch.decided { + return 0, errUndecided + } + return ch.ReadExtended(data, 0) +} + +func (ch *channel) Write(data []byte) (int, error) { + if !ch.decided { + return 0, errUndecided + } + return ch.WriteExtended(data, 0) +} + +func (ch *channel) CloseWrite() error { + if !ch.decided { + return errUndecided + } + ch.sentEOF = true + return ch.sendMessage(channelEOFMsg{ + PeersID: ch.remoteId}) +} + +func (ch *channel) Close() error { + if !ch.decided { + return errUndecided + } + + return ch.sendMessage(channelCloseMsg{ + PeersID: ch.remoteId}) +} + +// Extended returns an io.ReadWriter that sends and receives data on the given, +// SSH extended stream. Such streams are used, for example, for stderr. +func (ch *channel) Extended(code uint32) io.ReadWriter { + if !ch.decided { + return nil + } + return &extChannel{code, ch} +} + +func (ch *channel) Stderr() io.ReadWriter { + return ch.Extended(1) +} + +func (ch *channel) SendRequest(name string, wantReply bool, payload []byte) (bool, error) { + if !ch.decided { + return false, errUndecided + } + + if wantReply { + ch.sentRequestMu.Lock() + defer ch.sentRequestMu.Unlock() + } + + msg := channelRequestMsg{ + PeersID: ch.remoteId, + Request: name, + WantReply: wantReply, + RequestSpecificData: payload, + } + + if err := ch.sendMessage(msg); err != nil { + return false, err + } + + if wantReply { + m, ok := (<-ch.msg) + if !ok { + return false, io.EOF + } + switch m.(type) { + case *channelRequestFailureMsg: + return false, nil + case *channelRequestSuccessMsg: + return true, nil + default: + return false, fmt.Errorf("ssh: unexpected response to channel request: %#v", m) + } + } + + return false, nil +} + +// ackRequest either sends an ack or nack to the channel request. +func (ch *channel) ackRequest(ok bool) error { + if !ch.decided { + return errUndecided + } + + var msg interface{} + if !ok { + msg = channelRequestFailureMsg{ + PeersID: ch.remoteId, + } + } else { + msg = channelRequestSuccessMsg{ + PeersID: ch.remoteId, + } + } + return ch.sendMessage(msg) +} + +func (ch *channel) ChannelType() string { + return ch.chanType +} + +func (ch *channel) ExtraData() []byte { + return ch.extraData +} diff --git a/vendor/golang.org/x/crypto/ssh/cipher.go b/vendor/golang.org/x/crypto/ssh/cipher.go new file mode 100644 index 0000000..a65a923 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/cipher.go @@ -0,0 +1,770 @@ +// Copyright 2011 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "crypto/aes" + "crypto/cipher" + "crypto/des" + "crypto/rc4" + "crypto/subtle" + "encoding/binary" + "errors" + "fmt" + "hash" + "io" + "io/ioutil" + "math/bits" + + "golang.org/x/crypto/internal/chacha20" + "golang.org/x/crypto/poly1305" +) + +const ( + packetSizeMultiple = 16 // TODO(huin) this should be determined by the cipher. + + // RFC 4253 section 6.1 defines a minimum packet size of 32768 that implementations + // MUST be able to process (plus a few more kilobytes for padding and mac). The RFC + // indicates implementations SHOULD be able to handle larger packet sizes, but then + // waffles on about reasonable limits. + // + // OpenSSH caps their maxPacket at 256kB so we choose to do + // the same. maxPacket is also used to ensure that uint32 + // length fields do not overflow, so it should remain well + // below 4G. + maxPacket = 256 * 1024 +) + +// noneCipher implements cipher.Stream and provides no encryption. It is used +// by the transport before the first key-exchange. +type noneCipher struct{} + +func (c noneCipher) XORKeyStream(dst, src []byte) { + copy(dst, src) +} + +func newAESCTR(key, iv []byte) (cipher.Stream, error) { + c, err := aes.NewCipher(key) + if err != nil { + return nil, err + } + return cipher.NewCTR(c, iv), nil +} + +func newRC4(key, iv []byte) (cipher.Stream, error) { + return rc4.NewCipher(key) +} + +type cipherMode struct { + keySize int + ivSize int + create func(key, iv []byte, macKey []byte, algs directionAlgorithms) (packetCipher, error) +} + +func streamCipherMode(skip int, createFunc func(key, iv []byte) (cipher.Stream, error)) func(key, iv []byte, macKey []byte, algs directionAlgorithms) (packetCipher, error) { + return func(key, iv, macKey []byte, algs directionAlgorithms) (packetCipher, error) { + stream, err := createFunc(key, iv) + if err != nil { + return nil, err + } + + var streamDump []byte + if skip > 0 { + streamDump = make([]byte, 512) + } + + for remainingToDump := skip; remainingToDump > 0; { + dumpThisTime := remainingToDump + if dumpThisTime > len(streamDump) { + dumpThisTime = len(streamDump) + } + stream.XORKeyStream(streamDump[:dumpThisTime], streamDump[:dumpThisTime]) + remainingToDump -= dumpThisTime + } + + mac := macModes[algs.MAC].new(macKey) + return &streamPacketCipher{ + mac: mac, + etm: macModes[algs.MAC].etm, + macResult: make([]byte, mac.Size()), + cipher: stream, + }, nil + } +} + +// cipherModes documents properties of supported ciphers. Ciphers not included +// are not supported and will not be negotiated, even if explicitly requested in +// ClientConfig.Crypto.Ciphers. +var cipherModes = map[string]*cipherMode{ + // Ciphers from RFC4344, which introduced many CTR-based ciphers. Algorithms + // are defined in the order specified in the RFC. + "aes128-ctr": {16, aes.BlockSize, streamCipherMode(0, newAESCTR)}, + "aes192-ctr": {24, aes.BlockSize, streamCipherMode(0, newAESCTR)}, + "aes256-ctr": {32, aes.BlockSize, streamCipherMode(0, newAESCTR)}, + + // Ciphers from RFC4345, which introduces security-improved arcfour ciphers. + // They are defined in the order specified in the RFC. + "arcfour128": {16, 0, streamCipherMode(1536, newRC4)}, + "arcfour256": {32, 0, streamCipherMode(1536, newRC4)}, + + // Cipher defined in RFC 4253, which describes SSH Transport Layer Protocol. + // Note that this cipher is not safe, as stated in RFC 4253: "Arcfour (and + // RC4) has problems with weak keys, and should be used with caution." + // RFC4345 introduces improved versions of Arcfour. + "arcfour": {16, 0, streamCipherMode(0, newRC4)}, + + // AEAD ciphers + gcmCipherID: {16, 12, newGCMCipher}, + chacha20Poly1305ID: {64, 0, newChaCha20Cipher}, + + // CBC mode is insecure and so is not included in the default config. + // (See http://www.isg.rhul.ac.uk/~kp/SandPfinal.pdf). If absolutely + // needed, it's possible to specify a custom Config to enable it. + // You should expect that an active attacker can recover plaintext if + // you do. + aes128cbcID: {16, aes.BlockSize, newAESCBCCipher}, + + // 3des-cbc is insecure and is not included in the default + // config. + tripledescbcID: {24, des.BlockSize, newTripleDESCBCCipher}, +} + +// prefixLen is the length of the packet prefix that contains the packet length +// and number of padding bytes. +const prefixLen = 5 + +// streamPacketCipher is a packetCipher using a stream cipher. +type streamPacketCipher struct { + mac hash.Hash + cipher cipher.Stream + etm bool + + // The following members are to avoid per-packet allocations. + prefix [prefixLen]byte + seqNumBytes [4]byte + padding [2 * packetSizeMultiple]byte + packetData []byte + macResult []byte +} + +// readCipherPacket reads and decrypt a single packet from the reader argument. +func (s *streamPacketCipher) readCipherPacket(seqNum uint32, r io.Reader) ([]byte, error) { + if _, err := io.ReadFull(r, s.prefix[:]); err != nil { + return nil, err + } + + var encryptedPaddingLength [1]byte + if s.mac != nil && s.etm { + copy(encryptedPaddingLength[:], s.prefix[4:5]) + s.cipher.XORKeyStream(s.prefix[4:5], s.prefix[4:5]) + } else { + s.cipher.XORKeyStream(s.prefix[:], s.prefix[:]) + } + + length := binary.BigEndian.Uint32(s.prefix[0:4]) + paddingLength := uint32(s.prefix[4]) + + var macSize uint32 + if s.mac != nil { + s.mac.Reset() + binary.BigEndian.PutUint32(s.seqNumBytes[:], seqNum) + s.mac.Write(s.seqNumBytes[:]) + if s.etm { + s.mac.Write(s.prefix[:4]) + s.mac.Write(encryptedPaddingLength[:]) + } else { + s.mac.Write(s.prefix[:]) + } + macSize = uint32(s.mac.Size()) + } + + if length <= paddingLength+1 { + return nil, errors.New("ssh: invalid packet length, packet too small") + } + + if length > maxPacket { + return nil, errors.New("ssh: invalid packet length, packet too large") + } + + // the maxPacket check above ensures that length-1+macSize + // does not overflow. + if uint32(cap(s.packetData)) < length-1+macSize { + s.packetData = make([]byte, length-1+macSize) + } else { + s.packetData = s.packetData[:length-1+macSize] + } + + if _, err := io.ReadFull(r, s.packetData); err != nil { + return nil, err + } + mac := s.packetData[length-1:] + data := s.packetData[:length-1] + + if s.mac != nil && s.etm { + s.mac.Write(data) + } + + s.cipher.XORKeyStream(data, data) + + if s.mac != nil { + if !s.etm { + s.mac.Write(data) + } + s.macResult = s.mac.Sum(s.macResult[:0]) + if subtle.ConstantTimeCompare(s.macResult, mac) != 1 { + return nil, errors.New("ssh: MAC failure") + } + } + + return s.packetData[:length-paddingLength-1], nil +} + +// writeCipherPacket encrypts and sends a packet of data to the writer argument +func (s *streamPacketCipher) writeCipherPacket(seqNum uint32, w io.Writer, rand io.Reader, packet []byte) error { + if len(packet) > maxPacket { + return errors.New("ssh: packet too large") + } + + aadlen := 0 + if s.mac != nil && s.etm { + // packet length is not encrypted for EtM modes + aadlen = 4 + } + + paddingLength := packetSizeMultiple - (prefixLen+len(packet)-aadlen)%packetSizeMultiple + if paddingLength < 4 { + paddingLength += packetSizeMultiple + } + + length := len(packet) + 1 + paddingLength + binary.BigEndian.PutUint32(s.prefix[:], uint32(length)) + s.prefix[4] = byte(paddingLength) + padding := s.padding[:paddingLength] + if _, err := io.ReadFull(rand, padding); err != nil { + return err + } + + if s.mac != nil { + s.mac.Reset() + binary.BigEndian.PutUint32(s.seqNumBytes[:], seqNum) + s.mac.Write(s.seqNumBytes[:]) + + if s.etm { + // For EtM algorithms, the packet length must stay unencrypted, + // but the following data (padding length) must be encrypted + s.cipher.XORKeyStream(s.prefix[4:5], s.prefix[4:5]) + } + + s.mac.Write(s.prefix[:]) + + if !s.etm { + // For non-EtM algorithms, the algorithm is applied on unencrypted data + s.mac.Write(packet) + s.mac.Write(padding) + } + } + + if !(s.mac != nil && s.etm) { + // For EtM algorithms, the padding length has already been encrypted + // and the packet length must remain unencrypted + s.cipher.XORKeyStream(s.prefix[:], s.prefix[:]) + } + + s.cipher.XORKeyStream(packet, packet) + s.cipher.XORKeyStream(padding, padding) + + if s.mac != nil && s.etm { + // For EtM algorithms, packet and padding must be encrypted + s.mac.Write(packet) + s.mac.Write(padding) + } + + if _, err := w.Write(s.prefix[:]); err != nil { + return err + } + if _, err := w.Write(packet); err != nil { + return err + } + if _, err := w.Write(padding); err != nil { + return err + } + + if s.mac != nil { + s.macResult = s.mac.Sum(s.macResult[:0]) + if _, err := w.Write(s.macResult); err != nil { + return err + } + } + + return nil +} + +type gcmCipher struct { + aead cipher.AEAD + prefix [4]byte + iv []byte + buf []byte +} + +func newGCMCipher(key, iv, unusedMacKey []byte, unusedAlgs directionAlgorithms) (packetCipher, error) { + c, err := aes.NewCipher(key) + if err != nil { + return nil, err + } + + aead, err := cipher.NewGCM(c) + if err != nil { + return nil, err + } + + return &gcmCipher{ + aead: aead, + iv: iv, + }, nil +} + +const gcmTagSize = 16 + +func (c *gcmCipher) writeCipherPacket(seqNum uint32, w io.Writer, rand io.Reader, packet []byte) error { + // Pad out to multiple of 16 bytes. This is different from the + // stream cipher because that encrypts the length too. + padding := byte(packetSizeMultiple - (1+len(packet))%packetSizeMultiple) + if padding < 4 { + padding += packetSizeMultiple + } + + length := uint32(len(packet) + int(padding) + 1) + binary.BigEndian.PutUint32(c.prefix[:], length) + if _, err := w.Write(c.prefix[:]); err != nil { + return err + } + + if cap(c.buf) < int(length) { + c.buf = make([]byte, length) + } else { + c.buf = c.buf[:length] + } + + c.buf[0] = padding + copy(c.buf[1:], packet) + if _, err := io.ReadFull(rand, c.buf[1+len(packet):]); err != nil { + return err + } + c.buf = c.aead.Seal(c.buf[:0], c.iv, c.buf, c.prefix[:]) + if _, err := w.Write(c.buf); err != nil { + return err + } + c.incIV() + + return nil +} + +func (c *gcmCipher) incIV() { + for i := 4 + 7; i >= 4; i-- { + c.iv[i]++ + if c.iv[i] != 0 { + break + } + } +} + +func (c *gcmCipher) readCipherPacket(seqNum uint32, r io.Reader) ([]byte, error) { + if _, err := io.ReadFull(r, c.prefix[:]); err != nil { + return nil, err + } + length := binary.BigEndian.Uint32(c.prefix[:]) + if length > maxPacket { + return nil, errors.New("ssh: max packet length exceeded") + } + + if cap(c.buf) < int(length+gcmTagSize) { + c.buf = make([]byte, length+gcmTagSize) + } else { + c.buf = c.buf[:length+gcmTagSize] + } + + if _, err := io.ReadFull(r, c.buf); err != nil { + return nil, err + } + + plain, err := c.aead.Open(c.buf[:0], c.iv, c.buf, c.prefix[:]) + if err != nil { + return nil, err + } + c.incIV() + + padding := plain[0] + if padding < 4 { + // padding is a byte, so it automatically satisfies + // the maximum size, which is 255. + return nil, fmt.Errorf("ssh: illegal padding %d", padding) + } + + if int(padding+1) >= len(plain) { + return nil, fmt.Errorf("ssh: padding %d too large", padding) + } + plain = plain[1 : length-uint32(padding)] + return plain, nil +} + +// cbcCipher implements aes128-cbc cipher defined in RFC 4253 section 6.1 +type cbcCipher struct { + mac hash.Hash + macSize uint32 + decrypter cipher.BlockMode + encrypter cipher.BlockMode + + // The following members are to avoid per-packet allocations. + seqNumBytes [4]byte + packetData []byte + macResult []byte + + // Amount of data we should still read to hide which + // verification error triggered. + oracleCamouflage uint32 +} + +func newCBCCipher(c cipher.Block, key, iv, macKey []byte, algs directionAlgorithms) (packetCipher, error) { + cbc := &cbcCipher{ + mac: macModes[algs.MAC].new(macKey), + decrypter: cipher.NewCBCDecrypter(c, iv), + encrypter: cipher.NewCBCEncrypter(c, iv), + packetData: make([]byte, 1024), + } + if cbc.mac != nil { + cbc.macSize = uint32(cbc.mac.Size()) + } + + return cbc, nil +} + +func newAESCBCCipher(key, iv, macKey []byte, algs directionAlgorithms) (packetCipher, error) { + c, err := aes.NewCipher(key) + if err != nil { + return nil, err + } + + cbc, err := newCBCCipher(c, key, iv, macKey, algs) + if err != nil { + return nil, err + } + + return cbc, nil +} + +func newTripleDESCBCCipher(key, iv, macKey []byte, algs directionAlgorithms) (packetCipher, error) { + c, err := des.NewTripleDESCipher(key) + if err != nil { + return nil, err + } + + cbc, err := newCBCCipher(c, key, iv, macKey, algs) + if err != nil { + return nil, err + } + + return cbc, nil +} + +func maxUInt32(a, b int) uint32 { + if a > b { + return uint32(a) + } + return uint32(b) +} + +const ( + cbcMinPacketSizeMultiple = 8 + cbcMinPacketSize = 16 + cbcMinPaddingSize = 4 +) + +// cbcError represents a verification error that may leak information. +type cbcError string + +func (e cbcError) Error() string { return string(e) } + +func (c *cbcCipher) readCipherPacket(seqNum uint32, r io.Reader) ([]byte, error) { + p, err := c.readCipherPacketLeaky(seqNum, r) + if err != nil { + if _, ok := err.(cbcError); ok { + // Verification error: read a fixed amount of + // data, to make distinguishing between + // failing MAC and failing length check more + // difficult. + io.CopyN(ioutil.Discard, r, int64(c.oracleCamouflage)) + } + } + return p, err +} + +func (c *cbcCipher) readCipherPacketLeaky(seqNum uint32, r io.Reader) ([]byte, error) { + blockSize := c.decrypter.BlockSize() + + // Read the header, which will include some of the subsequent data in the + // case of block ciphers - this is copied back to the payload later. + // How many bytes of payload/padding will be read with this first read. + firstBlockLength := uint32((prefixLen + blockSize - 1) / blockSize * blockSize) + firstBlock := c.packetData[:firstBlockLength] + if _, err := io.ReadFull(r, firstBlock); err != nil { + return nil, err + } + + c.oracleCamouflage = maxPacket + 4 + c.macSize - firstBlockLength + + c.decrypter.CryptBlocks(firstBlock, firstBlock) + length := binary.BigEndian.Uint32(firstBlock[:4]) + if length > maxPacket { + return nil, cbcError("ssh: packet too large") + } + if length+4 < maxUInt32(cbcMinPacketSize, blockSize) { + // The minimum size of a packet is 16 (or the cipher block size, whichever + // is larger) bytes. + return nil, cbcError("ssh: packet too small") + } + // The length of the packet (including the length field but not the MAC) must + // be a multiple of the block size or 8, whichever is larger. + if (length+4)%maxUInt32(cbcMinPacketSizeMultiple, blockSize) != 0 { + return nil, cbcError("ssh: invalid packet length multiple") + } + + paddingLength := uint32(firstBlock[4]) + if paddingLength < cbcMinPaddingSize || length <= paddingLength+1 { + return nil, cbcError("ssh: invalid packet length") + } + + // Positions within the c.packetData buffer: + macStart := 4 + length + paddingStart := macStart - paddingLength + + // Entire packet size, starting before length, ending at end of mac. + entirePacketSize := macStart + c.macSize + + // Ensure c.packetData is large enough for the entire packet data. + if uint32(cap(c.packetData)) < entirePacketSize { + // Still need to upsize and copy, but this should be rare at runtime, only + // on upsizing the packetData buffer. + c.packetData = make([]byte, entirePacketSize) + copy(c.packetData, firstBlock) + } else { + c.packetData = c.packetData[:entirePacketSize] + } + + n, err := io.ReadFull(r, c.packetData[firstBlockLength:]) + if err != nil { + return nil, err + } + c.oracleCamouflage -= uint32(n) + + remainingCrypted := c.packetData[firstBlockLength:macStart] + c.decrypter.CryptBlocks(remainingCrypted, remainingCrypted) + + mac := c.packetData[macStart:] + if c.mac != nil { + c.mac.Reset() + binary.BigEndian.PutUint32(c.seqNumBytes[:], seqNum) + c.mac.Write(c.seqNumBytes[:]) + c.mac.Write(c.packetData[:macStart]) + c.macResult = c.mac.Sum(c.macResult[:0]) + if subtle.ConstantTimeCompare(c.macResult, mac) != 1 { + return nil, cbcError("ssh: MAC failure") + } + } + + return c.packetData[prefixLen:paddingStart], nil +} + +func (c *cbcCipher) writeCipherPacket(seqNum uint32, w io.Writer, rand io.Reader, packet []byte) error { + effectiveBlockSize := maxUInt32(cbcMinPacketSizeMultiple, c.encrypter.BlockSize()) + + // Length of encrypted portion of the packet (header, payload, padding). + // Enforce minimum padding and packet size. + encLength := maxUInt32(prefixLen+len(packet)+cbcMinPaddingSize, cbcMinPaddingSize) + // Enforce block size. + encLength = (encLength + effectiveBlockSize - 1) / effectiveBlockSize * effectiveBlockSize + + length := encLength - 4 + paddingLength := int(length) - (1 + len(packet)) + + // Overall buffer contains: header, payload, padding, mac. + // Space for the MAC is reserved in the capacity but not the slice length. + bufferSize := encLength + c.macSize + if uint32(cap(c.packetData)) < bufferSize { + c.packetData = make([]byte, encLength, bufferSize) + } else { + c.packetData = c.packetData[:encLength] + } + + p := c.packetData + + // Packet header. + binary.BigEndian.PutUint32(p, length) + p = p[4:] + p[0] = byte(paddingLength) + + // Payload. + p = p[1:] + copy(p, packet) + + // Padding. + p = p[len(packet):] + if _, err := io.ReadFull(rand, p); err != nil { + return err + } + + if c.mac != nil { + c.mac.Reset() + binary.BigEndian.PutUint32(c.seqNumBytes[:], seqNum) + c.mac.Write(c.seqNumBytes[:]) + c.mac.Write(c.packetData) + // The MAC is now appended into the capacity reserved for it earlier. + c.packetData = c.mac.Sum(c.packetData) + } + + c.encrypter.CryptBlocks(c.packetData[:encLength], c.packetData[:encLength]) + + if _, err := w.Write(c.packetData); err != nil { + return err + } + + return nil +} + +const chacha20Poly1305ID = "chacha20-poly1305@openssh.com" + +// chacha20Poly1305Cipher implements the chacha20-poly1305@openssh.com +// AEAD, which is described here: +// +// https://tools.ietf.org/html/draft-josefsson-ssh-chacha20-poly1305-openssh-00 +// +// the methods here also implement padding, which RFC4253 Section 6 +// also requires of stream ciphers. +type chacha20Poly1305Cipher struct { + lengthKey [8]uint32 + contentKey [8]uint32 + buf []byte +} + +func newChaCha20Cipher(key, unusedIV, unusedMACKey []byte, unusedAlgs directionAlgorithms) (packetCipher, error) { + if len(key) != 64 { + panic(len(key)) + } + + c := &chacha20Poly1305Cipher{ + buf: make([]byte, 256), + } + + for i := range c.contentKey { + c.contentKey[i] = binary.LittleEndian.Uint32(key[i*4 : (i+1)*4]) + } + for i := range c.lengthKey { + c.lengthKey[i] = binary.LittleEndian.Uint32(key[(i+8)*4 : (i+9)*4]) + } + return c, nil +} + +func (c *chacha20Poly1305Cipher) readCipherPacket(seqNum uint32, r io.Reader) ([]byte, error) { + nonce := [3]uint32{0, 0, bits.ReverseBytes32(seqNum)} + s := chacha20.New(c.contentKey, nonce) + var polyKey [32]byte + s.XORKeyStream(polyKey[:], polyKey[:]) + s.Advance() // skip next 32 bytes + + encryptedLength := c.buf[:4] + if _, err := io.ReadFull(r, encryptedLength); err != nil { + return nil, err + } + + var lenBytes [4]byte + chacha20.New(c.lengthKey, nonce).XORKeyStream(lenBytes[:], encryptedLength) + + length := binary.BigEndian.Uint32(lenBytes[:]) + if length > maxPacket { + return nil, errors.New("ssh: invalid packet length, packet too large") + } + + contentEnd := 4 + length + packetEnd := contentEnd + poly1305.TagSize + if uint32(cap(c.buf)) < packetEnd { + c.buf = make([]byte, packetEnd) + copy(c.buf[:], encryptedLength) + } else { + c.buf = c.buf[:packetEnd] + } + + if _, err := io.ReadFull(r, c.buf[4:packetEnd]); err != nil { + return nil, err + } + + var mac [poly1305.TagSize]byte + copy(mac[:], c.buf[contentEnd:packetEnd]) + if !poly1305.Verify(&mac, c.buf[:contentEnd], &polyKey) { + return nil, errors.New("ssh: MAC failure") + } + + plain := c.buf[4:contentEnd] + s.XORKeyStream(plain, plain) + + padding := plain[0] + if padding < 4 { + // padding is a byte, so it automatically satisfies + // the maximum size, which is 255. + return nil, fmt.Errorf("ssh: illegal padding %d", padding) + } + + if int(padding)+1 >= len(plain) { + return nil, fmt.Errorf("ssh: padding %d too large", padding) + } + + plain = plain[1 : len(plain)-int(padding)] + + return plain, nil +} + +func (c *chacha20Poly1305Cipher) writeCipherPacket(seqNum uint32, w io.Writer, rand io.Reader, payload []byte) error { + nonce := [3]uint32{0, 0, bits.ReverseBytes32(seqNum)} + s := chacha20.New(c.contentKey, nonce) + var polyKey [32]byte + s.XORKeyStream(polyKey[:], polyKey[:]) + s.Advance() // skip next 32 bytes + + // There is no blocksize, so fall back to multiple of 8 byte + // padding, as described in RFC 4253, Sec 6. + const packetSizeMultiple = 8 + + padding := packetSizeMultiple - (1+len(payload))%packetSizeMultiple + if padding < 4 { + padding += packetSizeMultiple + } + + // size (4 bytes), padding (1), payload, padding, tag. + totalLength := 4 + 1 + len(payload) + padding + poly1305.TagSize + if cap(c.buf) < totalLength { + c.buf = make([]byte, totalLength) + } else { + c.buf = c.buf[:totalLength] + } + + binary.BigEndian.PutUint32(c.buf, uint32(1+len(payload)+padding)) + chacha20.New(c.lengthKey, nonce).XORKeyStream(c.buf, c.buf[:4]) + c.buf[4] = byte(padding) + copy(c.buf[5:], payload) + packetEnd := 5 + len(payload) + padding + if _, err := io.ReadFull(rand, c.buf[5+len(payload):packetEnd]); err != nil { + return err + } + + s.XORKeyStream(c.buf[4:], c.buf[4:packetEnd]) + + var mac [poly1305.TagSize]byte + poly1305.Sum(&mac, c.buf[:packetEnd], &polyKey) + + copy(c.buf[packetEnd:], mac[:]) + + if _, err := w.Write(c.buf); err != nil { + return err + } + return nil +} diff --git a/vendor/golang.org/x/crypto/ssh/client.go b/vendor/golang.org/x/crypto/ssh/client.go new file mode 100644 index 0000000..7b00bff --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/client.go @@ -0,0 +1,278 @@ +// Copyright 2011 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "bytes" + "errors" + "fmt" + "net" + "os" + "sync" + "time" +) + +// Client implements a traditional SSH client that supports shells, +// subprocesses, TCP port/streamlocal forwarding and tunneled dialing. +type Client struct { + Conn + + handleForwardsOnce sync.Once // guards calling (*Client).handleForwards + + forwards forwardList // forwarded tcpip connections from the remote side + mu sync.Mutex + channelHandlers map[string]chan NewChannel +} + +// HandleChannelOpen returns a channel on which NewChannel requests +// for the given type are sent. If the type already is being handled, +// nil is returned. The channel is closed when the connection is closed. +func (c *Client) HandleChannelOpen(channelType string) <-chan NewChannel { + c.mu.Lock() + defer c.mu.Unlock() + if c.channelHandlers == nil { + // The SSH channel has been closed. + c := make(chan NewChannel) + close(c) + return c + } + + ch := c.channelHandlers[channelType] + if ch != nil { + return nil + } + + ch = make(chan NewChannel, chanSize) + c.channelHandlers[channelType] = ch + return ch +} + +// NewClient creates a Client on top of the given connection. +func NewClient(c Conn, chans <-chan NewChannel, reqs <-chan *Request) *Client { + conn := &Client{ + Conn: c, + channelHandlers: make(map[string]chan NewChannel, 1), + } + + go conn.handleGlobalRequests(reqs) + go conn.handleChannelOpens(chans) + go func() { + conn.Wait() + conn.forwards.closeAll() + }() + return conn +} + +// NewClientConn establishes an authenticated SSH connection using c +// as the underlying transport. The Request and NewChannel channels +// must be serviced or the connection will hang. +func NewClientConn(c net.Conn, addr string, config *ClientConfig) (Conn, <-chan NewChannel, <-chan *Request, error) { + fullConf := *config + fullConf.SetDefaults() + if fullConf.HostKeyCallback == nil { + c.Close() + return nil, nil, nil, errors.New("ssh: must specify HostKeyCallback") + } + + conn := &connection{ + sshConn: sshConn{conn: c}, + } + + if err := conn.clientHandshake(addr, &fullConf); err != nil { + c.Close() + return nil, nil, nil, fmt.Errorf("ssh: handshake failed: %v", err) + } + conn.mux = newMux(conn.transport) + return conn, conn.mux.incomingChannels, conn.mux.incomingRequests, nil +} + +// clientHandshake performs the client side key exchange. See RFC 4253 Section +// 7. +func (c *connection) clientHandshake(dialAddress string, config *ClientConfig) error { + if config.ClientVersion != "" { + c.clientVersion = []byte(config.ClientVersion) + } else { + c.clientVersion = []byte(packageVersion) + } + var err error + c.serverVersion, err = exchangeVersions(c.sshConn.conn, c.clientVersion) + if err != nil { + return err + } + + c.transport = newClientTransport( + newTransport(c.sshConn.conn, config.Rand, true /* is client */), + c.clientVersion, c.serverVersion, config, dialAddress, c.sshConn.RemoteAddr()) + if err := c.transport.waitSession(); err != nil { + return err + } + + c.sessionID = c.transport.getSessionID() + return c.clientAuthenticate(config) +} + +// verifyHostKeySignature verifies the host key obtained in the key +// exchange. +func verifyHostKeySignature(hostKey PublicKey, result *kexResult) error { + sig, rest, ok := parseSignatureBody(result.Signature) + if len(rest) > 0 || !ok { + return errors.New("ssh: signature parse error") + } + + return hostKey.Verify(result.H, sig) +} + +// NewSession opens a new Session for this client. (A session is a remote +// execution of a program.) +func (c *Client) NewSession() (*Session, error) { + ch, in, err := c.OpenChannel("session", nil) + if err != nil { + return nil, err + } + return newSession(ch, in) +} + +func (c *Client) handleGlobalRequests(incoming <-chan *Request) { + for r := range incoming { + // This handles keepalive messages and matches + // the behaviour of OpenSSH. + r.Reply(false, nil) + } +} + +// handleChannelOpens channel open messages from the remote side. +func (c *Client) handleChannelOpens(in <-chan NewChannel) { + for ch := range in { + c.mu.Lock() + handler := c.channelHandlers[ch.ChannelType()] + c.mu.Unlock() + + if handler != nil { + handler <- ch + } else { + ch.Reject(UnknownChannelType, fmt.Sprintf("unknown channel type: %v", ch.ChannelType())) + } + } + + c.mu.Lock() + for _, ch := range c.channelHandlers { + close(ch) + } + c.channelHandlers = nil + c.mu.Unlock() +} + +// Dial starts a client connection to the given SSH server. It is a +// convenience function that connects to the given network address, +// initiates the SSH handshake, and then sets up a Client. For access +// to incoming channels and requests, use net.Dial with NewClientConn +// instead. +func Dial(network, addr string, config *ClientConfig) (*Client, error) { + conn, err := net.DialTimeout(network, addr, config.Timeout) + if err != nil { + return nil, err + } + c, chans, reqs, err := NewClientConn(conn, addr, config) + if err != nil { + return nil, err + } + return NewClient(c, chans, reqs), nil +} + +// HostKeyCallback is the function type used for verifying server +// keys. A HostKeyCallback must return nil if the host key is OK, or +// an error to reject it. It receives the hostname as passed to Dial +// or NewClientConn. The remote address is the RemoteAddr of the +// net.Conn underlying the SSH connection. +type HostKeyCallback func(hostname string, remote net.Addr, key PublicKey) error + +// BannerCallback is the function type used for treat the banner sent by +// the server. A BannerCallback receives the message sent by the remote server. +type BannerCallback func(message string) error + +// A ClientConfig structure is used to configure a Client. It must not be +// modified after having been passed to an SSH function. +type ClientConfig struct { + // Config contains configuration that is shared between clients and + // servers. + Config + + // User contains the username to authenticate as. + User string + + // Auth contains possible authentication methods to use with the + // server. Only the first instance of a particular RFC 4252 method will + // be used during authentication. + Auth []AuthMethod + + // HostKeyCallback is called during the cryptographic + // handshake to validate the server's host key. The client + // configuration must supply this callback for the connection + // to succeed. The functions InsecureIgnoreHostKey or + // FixedHostKey can be used for simplistic host key checks. + HostKeyCallback HostKeyCallback + + // BannerCallback is called during the SSH dance to display a custom + // server's message. The client configuration can supply this callback to + // handle it as wished. The function BannerDisplayStderr can be used for + // simplistic display on Stderr. + BannerCallback BannerCallback + + // ClientVersion contains the version identification string that will + // be used for the connection. If empty, a reasonable default is used. + ClientVersion string + + // HostKeyAlgorithms lists the key types that the client will + // accept from the server as host key, in order of + // preference. If empty, a reasonable default is used. Any + // string returned from PublicKey.Type method may be used, or + // any of the CertAlgoXxxx and KeyAlgoXxxx constants. + HostKeyAlgorithms []string + + // Timeout is the maximum amount of time for the TCP connection to establish. + // + // A Timeout of zero means no timeout. + Timeout time.Duration +} + +// InsecureIgnoreHostKey returns a function that can be used for +// ClientConfig.HostKeyCallback to accept any host key. It should +// not be used for production code. +func InsecureIgnoreHostKey() HostKeyCallback { + return func(hostname string, remote net.Addr, key PublicKey) error { + return nil + } +} + +type fixedHostKey struct { + key PublicKey +} + +func (f *fixedHostKey) check(hostname string, remote net.Addr, key PublicKey) error { + if f.key == nil { + return fmt.Errorf("ssh: required host key was nil") + } + if !bytes.Equal(key.Marshal(), f.key.Marshal()) { + return fmt.Errorf("ssh: host key mismatch") + } + return nil +} + +// FixedHostKey returns a function for use in +// ClientConfig.HostKeyCallback to accept only a specific host key. +func FixedHostKey(key PublicKey) HostKeyCallback { + hk := &fixedHostKey{key} + return hk.check +} + +// BannerDisplayStderr returns a function that can be used for +// ClientConfig.BannerCallback to display banners on os.Stderr. +func BannerDisplayStderr() BannerCallback { + return func(banner string) error { + _, err := os.Stderr.WriteString(banner) + + return err + } +} diff --git a/vendor/golang.org/x/crypto/ssh/client_auth.go b/vendor/golang.org/x/crypto/ssh/client_auth.go new file mode 100644 index 0000000..0590070 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/client_auth.go @@ -0,0 +1,639 @@ +// Copyright 2011 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "bytes" + "errors" + "fmt" + "io" +) + +type authResult int + +const ( + authFailure authResult = iota + authPartialSuccess + authSuccess +) + +// clientAuthenticate authenticates with the remote server. See RFC 4252. +func (c *connection) clientAuthenticate(config *ClientConfig) error { + // initiate user auth session + if err := c.transport.writePacket(Marshal(&serviceRequestMsg{serviceUserAuth})); err != nil { + return err + } + packet, err := c.transport.readPacket() + if err != nil { + return err + } + var serviceAccept serviceAcceptMsg + if err := Unmarshal(packet, &serviceAccept); err != nil { + return err + } + + // during the authentication phase the client first attempts the "none" method + // then any untried methods suggested by the server. + tried := make(map[string]bool) + var lastMethods []string + + sessionID := c.transport.getSessionID() + for auth := AuthMethod(new(noneAuth)); auth != nil; { + ok, methods, err := auth.auth(sessionID, config.User, c.transport, config.Rand) + if err != nil { + return err + } + if ok == authSuccess { + // success + return nil + } else if ok == authFailure { + tried[auth.method()] = true + } + if methods == nil { + methods = lastMethods + } + lastMethods = methods + + auth = nil + + findNext: + for _, a := range config.Auth { + candidateMethod := a.method() + if tried[candidateMethod] { + continue + } + for _, meth := range methods { + if meth == candidateMethod { + auth = a + break findNext + } + } + } + } + return fmt.Errorf("ssh: unable to authenticate, attempted methods %v, no supported methods remain", keys(tried)) +} + +func keys(m map[string]bool) []string { + s := make([]string, 0, len(m)) + + for key := range m { + s = append(s, key) + } + return s +} + +// An AuthMethod represents an instance of an RFC 4252 authentication method. +type AuthMethod interface { + // auth authenticates user over transport t. + // Returns true if authentication is successful. + // If authentication is not successful, a []string of alternative + // method names is returned. If the slice is nil, it will be ignored + // and the previous set of possible methods will be reused. + auth(session []byte, user string, p packetConn, rand io.Reader) (authResult, []string, error) + + // method returns the RFC 4252 method name. + method() string +} + +// "none" authentication, RFC 4252 section 5.2. +type noneAuth int + +func (n *noneAuth) auth(session []byte, user string, c packetConn, rand io.Reader) (authResult, []string, error) { + if err := c.writePacket(Marshal(&userAuthRequestMsg{ + User: user, + Service: serviceSSH, + Method: "none", + })); err != nil { + return authFailure, nil, err + } + + return handleAuthResponse(c) +} + +func (n *noneAuth) method() string { + return "none" +} + +// passwordCallback is an AuthMethod that fetches the password through +// a function call, e.g. by prompting the user. +type passwordCallback func() (password string, err error) + +func (cb passwordCallback) auth(session []byte, user string, c packetConn, rand io.Reader) (authResult, []string, error) { + type passwordAuthMsg struct { + User string `sshtype:"50"` + Service string + Method string + Reply bool + Password string + } + + pw, err := cb() + // REVIEW NOTE: is there a need to support skipping a password attempt? + // The program may only find out that the user doesn't have a password + // when prompting. + if err != nil { + return authFailure, nil, err + } + + if err := c.writePacket(Marshal(&passwordAuthMsg{ + User: user, + Service: serviceSSH, + Method: cb.method(), + Reply: false, + Password: pw, + })); err != nil { + return authFailure, nil, err + } + + return handleAuthResponse(c) +} + +func (cb passwordCallback) method() string { + return "password" +} + +// Password returns an AuthMethod using the given password. +func Password(secret string) AuthMethod { + return passwordCallback(func() (string, error) { return secret, nil }) +} + +// PasswordCallback returns an AuthMethod that uses a callback for +// fetching a password. +func PasswordCallback(prompt func() (secret string, err error)) AuthMethod { + return passwordCallback(prompt) +} + +type publickeyAuthMsg struct { + User string `sshtype:"50"` + Service string + Method string + // HasSig indicates to the receiver packet that the auth request is signed and + // should be used for authentication of the request. + HasSig bool + Algoname string + PubKey []byte + // Sig is tagged with "rest" so Marshal will exclude it during + // validateKey + Sig []byte `ssh:"rest"` +} + +// publicKeyCallback is an AuthMethod that uses a set of key +// pairs for authentication. +type publicKeyCallback func() ([]Signer, error) + +func (cb publicKeyCallback) method() string { + return "publickey" +} + +func (cb publicKeyCallback) auth(session []byte, user string, c packetConn, rand io.Reader) (authResult, []string, error) { + // Authentication is performed by sending an enquiry to test if a key is + // acceptable to the remote. If the key is acceptable, the client will + // attempt to authenticate with the valid key. If not the client will repeat + // the process with the remaining keys. + + signers, err := cb() + if err != nil { + return authFailure, nil, err + } + var methods []string + for _, signer := range signers { + ok, err := validateKey(signer.PublicKey(), user, c) + if err != nil { + return authFailure, nil, err + } + if !ok { + continue + } + + pub := signer.PublicKey() + pubKey := pub.Marshal() + sign, err := signer.Sign(rand, buildDataSignedForAuth(session, userAuthRequestMsg{ + User: user, + Service: serviceSSH, + Method: cb.method(), + }, []byte(pub.Type()), pubKey)) + if err != nil { + return authFailure, nil, err + } + + // manually wrap the serialized signature in a string + s := Marshal(sign) + sig := make([]byte, stringLength(len(s))) + marshalString(sig, s) + msg := publickeyAuthMsg{ + User: user, + Service: serviceSSH, + Method: cb.method(), + HasSig: true, + Algoname: pub.Type(), + PubKey: pubKey, + Sig: sig, + } + p := Marshal(&msg) + if err := c.writePacket(p); err != nil { + return authFailure, nil, err + } + var success authResult + success, methods, err = handleAuthResponse(c) + if err != nil { + return authFailure, nil, err + } + + // If authentication succeeds or the list of available methods does not + // contain the "publickey" method, do not attempt to authenticate with any + // other keys. According to RFC 4252 Section 7, the latter can occur when + // additional authentication methods are required. + if success == authSuccess || !containsMethod(methods, cb.method()) { + return success, methods, err + } + } + + return authFailure, methods, nil +} + +func containsMethod(methods []string, method string) bool { + for _, m := range methods { + if m == method { + return true + } + } + + return false +} + +// validateKey validates the key provided is acceptable to the server. +func validateKey(key PublicKey, user string, c packetConn) (bool, error) { + pubKey := key.Marshal() + msg := publickeyAuthMsg{ + User: user, + Service: serviceSSH, + Method: "publickey", + HasSig: false, + Algoname: key.Type(), + PubKey: pubKey, + } + if err := c.writePacket(Marshal(&msg)); err != nil { + return false, err + } + + return confirmKeyAck(key, c) +} + +func confirmKeyAck(key PublicKey, c packetConn) (bool, error) { + pubKey := key.Marshal() + algoname := key.Type() + + for { + packet, err := c.readPacket() + if err != nil { + return false, err + } + switch packet[0] { + case msgUserAuthBanner: + if err := handleBannerResponse(c, packet); err != nil { + return false, err + } + case msgUserAuthPubKeyOk: + var msg userAuthPubKeyOkMsg + if err := Unmarshal(packet, &msg); err != nil { + return false, err + } + if msg.Algo != algoname || !bytes.Equal(msg.PubKey, pubKey) { + return false, nil + } + return true, nil + case msgUserAuthFailure: + return false, nil + default: + return false, unexpectedMessageError(msgUserAuthSuccess, packet[0]) + } + } +} + +// PublicKeys returns an AuthMethod that uses the given key +// pairs. +func PublicKeys(signers ...Signer) AuthMethod { + return publicKeyCallback(func() ([]Signer, error) { return signers, nil }) +} + +// PublicKeysCallback returns an AuthMethod that runs the given +// function to obtain a list of key pairs. +func PublicKeysCallback(getSigners func() (signers []Signer, err error)) AuthMethod { + return publicKeyCallback(getSigners) +} + +// handleAuthResponse returns whether the preceding authentication request succeeded +// along with a list of remaining authentication methods to try next and +// an error if an unexpected response was received. +func handleAuthResponse(c packetConn) (authResult, []string, error) { + for { + packet, err := c.readPacket() + if err != nil { + return authFailure, nil, err + } + + switch packet[0] { + case msgUserAuthBanner: + if err := handleBannerResponse(c, packet); err != nil { + return authFailure, nil, err + } + case msgUserAuthFailure: + var msg userAuthFailureMsg + if err := Unmarshal(packet, &msg); err != nil { + return authFailure, nil, err + } + if msg.PartialSuccess { + return authPartialSuccess, msg.Methods, nil + } + return authFailure, msg.Methods, nil + case msgUserAuthSuccess: + return authSuccess, nil, nil + default: + return authFailure, nil, unexpectedMessageError(msgUserAuthSuccess, packet[0]) + } + } +} + +func handleBannerResponse(c packetConn, packet []byte) error { + var msg userAuthBannerMsg + if err := Unmarshal(packet, &msg); err != nil { + return err + } + + transport, ok := c.(*handshakeTransport) + if !ok { + return nil + } + + if transport.bannerCallback != nil { + return transport.bannerCallback(msg.Message) + } + + return nil +} + +// KeyboardInteractiveChallenge should print questions, optionally +// disabling echoing (e.g. for passwords), and return all the answers. +// Challenge may be called multiple times in a single session. After +// successful authentication, the server may send a challenge with no +// questions, for which the user and instruction messages should be +// printed. RFC 4256 section 3.3 details how the UI should behave for +// both CLI and GUI environments. +type KeyboardInteractiveChallenge func(user, instruction string, questions []string, echos []bool) (answers []string, err error) + +// KeyboardInteractive returns an AuthMethod using a prompt/response +// sequence controlled by the server. +func KeyboardInteractive(challenge KeyboardInteractiveChallenge) AuthMethod { + return challenge +} + +func (cb KeyboardInteractiveChallenge) method() string { + return "keyboard-interactive" +} + +func (cb KeyboardInteractiveChallenge) auth(session []byte, user string, c packetConn, rand io.Reader) (authResult, []string, error) { + type initiateMsg struct { + User string `sshtype:"50"` + Service string + Method string + Language string + Submethods string + } + + if err := c.writePacket(Marshal(&initiateMsg{ + User: user, + Service: serviceSSH, + Method: "keyboard-interactive", + })); err != nil { + return authFailure, nil, err + } + + for { + packet, err := c.readPacket() + if err != nil { + return authFailure, nil, err + } + + // like handleAuthResponse, but with less options. + switch packet[0] { + case msgUserAuthBanner: + if err := handleBannerResponse(c, packet); err != nil { + return authFailure, nil, err + } + continue + case msgUserAuthInfoRequest: + // OK + case msgUserAuthFailure: + var msg userAuthFailureMsg + if err := Unmarshal(packet, &msg); err != nil { + return authFailure, nil, err + } + if msg.PartialSuccess { + return authPartialSuccess, msg.Methods, nil + } + return authFailure, msg.Methods, nil + case msgUserAuthSuccess: + return authSuccess, nil, nil + default: + return authFailure, nil, unexpectedMessageError(msgUserAuthInfoRequest, packet[0]) + } + + var msg userAuthInfoRequestMsg + if err := Unmarshal(packet, &msg); err != nil { + return authFailure, nil, err + } + + // Manually unpack the prompt/echo pairs. + rest := msg.Prompts + var prompts []string + var echos []bool + for i := 0; i < int(msg.NumPrompts); i++ { + prompt, r, ok := parseString(rest) + if !ok || len(r) == 0 { + return authFailure, nil, errors.New("ssh: prompt format error") + } + prompts = append(prompts, string(prompt)) + echos = append(echos, r[0] != 0) + rest = r[1:] + } + + if len(rest) != 0 { + return authFailure, nil, errors.New("ssh: extra data following keyboard-interactive pairs") + } + + answers, err := cb(msg.User, msg.Instruction, prompts, echos) + if err != nil { + return authFailure, nil, err + } + + if len(answers) != len(prompts) { + return authFailure, nil, errors.New("ssh: not enough answers from keyboard-interactive callback") + } + responseLength := 1 + 4 + for _, a := range answers { + responseLength += stringLength(len(a)) + } + serialized := make([]byte, responseLength) + p := serialized + p[0] = msgUserAuthInfoResponse + p = p[1:] + p = marshalUint32(p, uint32(len(answers))) + for _, a := range answers { + p = marshalString(p, []byte(a)) + } + + if err := c.writePacket(serialized); err != nil { + return authFailure, nil, err + } + } +} + +type retryableAuthMethod struct { + authMethod AuthMethod + maxTries int +} + +func (r *retryableAuthMethod) auth(session []byte, user string, c packetConn, rand io.Reader) (ok authResult, methods []string, err error) { + for i := 0; r.maxTries <= 0 || i < r.maxTries; i++ { + ok, methods, err = r.authMethod.auth(session, user, c, rand) + if ok != authFailure || err != nil { // either success, partial success or error terminate + return ok, methods, err + } + } + return ok, methods, err +} + +func (r *retryableAuthMethod) method() string { + return r.authMethod.method() +} + +// RetryableAuthMethod is a decorator for other auth methods enabling them to +// be retried up to maxTries before considering that AuthMethod itself failed. +// If maxTries is <= 0, will retry indefinitely +// +// This is useful for interactive clients using challenge/response type +// authentication (e.g. Keyboard-Interactive, Password, etc) where the user +// could mistype their response resulting in the server issuing a +// SSH_MSG_USERAUTH_FAILURE (rfc4252 #8 [password] and rfc4256 #3.4 +// [keyboard-interactive]); Without this decorator, the non-retryable +// AuthMethod would be removed from future consideration, and never tried again +// (and so the user would never be able to retry their entry). +func RetryableAuthMethod(auth AuthMethod, maxTries int) AuthMethod { + return &retryableAuthMethod{authMethod: auth, maxTries: maxTries} +} + +// GSSAPIWithMICAuthMethod is an AuthMethod with "gssapi-with-mic" authentication. +// See RFC 4462 section 3 +// gssAPIClient is implementation of the GSSAPIClient interface, see the definition of the interface for details. +// target is the server host you want to log in to. +func GSSAPIWithMICAuthMethod(gssAPIClient GSSAPIClient, target string) AuthMethod { + if gssAPIClient == nil { + panic("gss-api client must be not nil with enable gssapi-with-mic") + } + return &gssAPIWithMICCallback{gssAPIClient: gssAPIClient, target: target} +} + +type gssAPIWithMICCallback struct { + gssAPIClient GSSAPIClient + target string +} + +func (g *gssAPIWithMICCallback) auth(session []byte, user string, c packetConn, rand io.Reader) (authResult, []string, error) { + m := &userAuthRequestMsg{ + User: user, + Service: serviceSSH, + Method: g.method(), + } + // The GSS-API authentication method is initiated when the client sends an SSH_MSG_USERAUTH_REQUEST. + // See RFC 4462 section 3.2. + m.Payload = appendU32(m.Payload, 1) + m.Payload = appendString(m.Payload, string(krb5OID)) + if err := c.writePacket(Marshal(m)); err != nil { + return authFailure, nil, err + } + // The server responds to the SSH_MSG_USERAUTH_REQUEST with either an + // SSH_MSG_USERAUTH_FAILURE if none of the mechanisms are supported or + // with an SSH_MSG_USERAUTH_GSSAPI_RESPONSE. + // See RFC 4462 section 3.3. + // OpenSSH supports Kerberos V5 mechanism only for GSS-API authentication,so I don't want to check + // selected mech if it is valid. + packet, err := c.readPacket() + if err != nil { + return authFailure, nil, err + } + userAuthGSSAPIResp := &userAuthGSSAPIResponse{} + if err := Unmarshal(packet, userAuthGSSAPIResp); err != nil { + return authFailure, nil, err + } + // Start the loop into the exchange token. + // See RFC 4462 section 3.4. + var token []byte + defer g.gssAPIClient.DeleteSecContext() + for { + // Initiates the establishment of a security context between the application and a remote peer. + nextToken, needContinue, err := g.gssAPIClient.InitSecContext("host@"+g.target, token, false) + if err != nil { + return authFailure, nil, err + } + if len(nextToken) > 0 { + if err := c.writePacket(Marshal(&userAuthGSSAPIToken{ + Token: nextToken, + })); err != nil { + return authFailure, nil, err + } + } + if !needContinue { + break + } + packet, err = c.readPacket() + if err != nil { + return authFailure, nil, err + } + switch packet[0] { + case msgUserAuthFailure: + var msg userAuthFailureMsg + if err := Unmarshal(packet, &msg); err != nil { + return authFailure, nil, err + } + if msg.PartialSuccess { + return authPartialSuccess, msg.Methods, nil + } + return authFailure, msg.Methods, nil + case msgUserAuthGSSAPIError: + userAuthGSSAPIErrorResp := &userAuthGSSAPIError{} + if err := Unmarshal(packet, userAuthGSSAPIErrorResp); err != nil { + return authFailure, nil, err + } + return authFailure, nil, fmt.Errorf("GSS-API Error:\n"+ + "Major Status: %d\n"+ + "Minor Status: %d\n"+ + "Error Message: %s\n", userAuthGSSAPIErrorResp.MajorStatus, userAuthGSSAPIErrorResp.MinorStatus, + userAuthGSSAPIErrorResp.Message) + case msgUserAuthGSSAPIToken: + userAuthGSSAPITokenReq := &userAuthGSSAPIToken{} + if err := Unmarshal(packet, userAuthGSSAPITokenReq); err != nil { + return authFailure, nil, err + } + token = userAuthGSSAPITokenReq.Token + } + } + // Binding Encryption Keys. + // See RFC 4462 section 3.5. + micField := buildMIC(string(session), user, "ssh-connection", "gssapi-with-mic") + micToken, err := g.gssAPIClient.GetMIC(micField) + if err != nil { + return authFailure, nil, err + } + if err := c.writePacket(Marshal(&userAuthGSSAPIMIC{ + MIC: micToken, + })); err != nil { + return authFailure, nil, err + } + return handleAuthResponse(c) +} + +func (g *gssAPIWithMICCallback) method() string { + return "gssapi-with-mic" +} diff --git a/vendor/golang.org/x/crypto/ssh/common.go b/vendor/golang.org/x/crypto/ssh/common.go new file mode 100644 index 0000000..e55fe0a --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/common.go @@ -0,0 +1,396 @@ +// Copyright 2011 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "crypto" + "crypto/rand" + "fmt" + "io" + "math" + "sync" + + _ "crypto/sha1" + _ "crypto/sha256" + _ "crypto/sha512" +) + +// These are string constants in the SSH protocol. +const ( + compressionNone = "none" + serviceUserAuth = "ssh-userauth" + serviceSSH = "ssh-connection" +) + +// supportedCiphers lists ciphers we support but might not recommend. +var supportedCiphers = []string{ + "aes128-ctr", "aes192-ctr", "aes256-ctr", + "aes128-gcm@openssh.com", + chacha20Poly1305ID, + "arcfour256", "arcfour128", "arcfour", + aes128cbcID, + tripledescbcID, +} + +// preferredCiphers specifies the default preference for ciphers. +var preferredCiphers = []string{ + "aes128-gcm@openssh.com", + chacha20Poly1305ID, + "aes128-ctr", "aes192-ctr", "aes256-ctr", +} + +// supportedKexAlgos specifies the supported key-exchange algorithms in +// preference order. +var supportedKexAlgos = []string{ + kexAlgoCurve25519SHA256, + // P384 and P521 are not constant-time yet, but since we don't + // reuse ephemeral keys, using them for ECDH should be OK. + kexAlgoECDH256, kexAlgoECDH384, kexAlgoECDH521, + kexAlgoDH14SHA1, kexAlgoDH1SHA1, +} + +// serverForbiddenKexAlgos contains key exchange algorithms, that are forbidden +// for the server half. +var serverForbiddenKexAlgos = map[string]struct{}{ + kexAlgoDHGEXSHA1: {}, // server half implementation is only minimal to satisfy the automated tests + kexAlgoDHGEXSHA256: {}, // server half implementation is only minimal to satisfy the automated tests +} + +// supportedHostKeyAlgos specifies the supported host-key algorithms (i.e. methods +// of authenticating servers) in preference order. +var supportedHostKeyAlgos = []string{ + CertAlgoRSAv01, CertAlgoDSAv01, CertAlgoECDSA256v01, + CertAlgoECDSA384v01, CertAlgoECDSA521v01, CertAlgoED25519v01, + + KeyAlgoECDSA256, KeyAlgoECDSA384, KeyAlgoECDSA521, + KeyAlgoRSA, KeyAlgoDSA, + + KeyAlgoED25519, +} + +// supportedMACs specifies a default set of MAC algorithms in preference order. +// This is based on RFC 4253, section 6.4, but with hmac-md5 variants removed +// because they have reached the end of their useful life. +var supportedMACs = []string{ + "hmac-sha2-256-etm@openssh.com", "hmac-sha2-256", "hmac-sha1", "hmac-sha1-96", +} + +var supportedCompressions = []string{compressionNone} + +// hashFuncs keeps the mapping of supported algorithms to their respective +// hashes needed for signature verification. +var hashFuncs = map[string]crypto.Hash{ + KeyAlgoRSA: crypto.SHA1, + KeyAlgoDSA: crypto.SHA1, + KeyAlgoECDSA256: crypto.SHA256, + KeyAlgoECDSA384: crypto.SHA384, + KeyAlgoECDSA521: crypto.SHA512, + CertAlgoRSAv01: crypto.SHA1, + CertAlgoDSAv01: crypto.SHA1, + CertAlgoECDSA256v01: crypto.SHA256, + CertAlgoECDSA384v01: crypto.SHA384, + CertAlgoECDSA521v01: crypto.SHA512, +} + +// unexpectedMessageError results when the SSH message that we received didn't +// match what we wanted. +func unexpectedMessageError(expected, got uint8) error { + return fmt.Errorf("ssh: unexpected message type %d (expected %d)", got, expected) +} + +// parseError results from a malformed SSH message. +func parseError(tag uint8) error { + return fmt.Errorf("ssh: parse error in message type %d", tag) +} + +func findCommon(what string, client []string, server []string) (common string, err error) { + for _, c := range client { + for _, s := range server { + if c == s { + return c, nil + } + } + } + return "", fmt.Errorf("ssh: no common algorithm for %s; client offered: %v, server offered: %v", what, client, server) +} + +// directionAlgorithms records algorithm choices in one direction (either read or write) +type directionAlgorithms struct { + Cipher string + MAC string + Compression string +} + +// rekeyBytes returns a rekeying intervals in bytes. +func (a *directionAlgorithms) rekeyBytes() int64 { + // According to RFC4344 block ciphers should rekey after + // 2^(BLOCKSIZE/4) blocks. For all AES flavors BLOCKSIZE is + // 128. + switch a.Cipher { + case "aes128-ctr", "aes192-ctr", "aes256-ctr", gcmCipherID, aes128cbcID: + return 16 * (1 << 32) + + } + + // For others, stick with RFC4253 recommendation to rekey after 1 Gb of data. + return 1 << 30 +} + +type algorithms struct { + kex string + hostKey string + w directionAlgorithms + r directionAlgorithms +} + +func findAgreedAlgorithms(isClient bool, clientKexInit, serverKexInit *kexInitMsg) (algs *algorithms, err error) { + result := &algorithms{} + + result.kex, err = findCommon("key exchange", clientKexInit.KexAlgos, serverKexInit.KexAlgos) + if err != nil { + return + } + + result.hostKey, err = findCommon("host key", clientKexInit.ServerHostKeyAlgos, serverKexInit.ServerHostKeyAlgos) + if err != nil { + return + } + + stoc, ctos := &result.w, &result.r + if isClient { + ctos, stoc = stoc, ctos + } + + ctos.Cipher, err = findCommon("client to server cipher", clientKexInit.CiphersClientServer, serverKexInit.CiphersClientServer) + if err != nil { + return + } + + stoc.Cipher, err = findCommon("server to client cipher", clientKexInit.CiphersServerClient, serverKexInit.CiphersServerClient) + if err != nil { + return + } + + ctos.MAC, err = findCommon("client to server MAC", clientKexInit.MACsClientServer, serverKexInit.MACsClientServer) + if err != nil { + return + } + + stoc.MAC, err = findCommon("server to client MAC", clientKexInit.MACsServerClient, serverKexInit.MACsServerClient) + if err != nil { + return + } + + ctos.Compression, err = findCommon("client to server compression", clientKexInit.CompressionClientServer, serverKexInit.CompressionClientServer) + if err != nil { + return + } + + stoc.Compression, err = findCommon("server to client compression", clientKexInit.CompressionServerClient, serverKexInit.CompressionServerClient) + if err != nil { + return + } + + return result, nil +} + +// If rekeythreshold is too small, we can't make any progress sending +// stuff. +const minRekeyThreshold uint64 = 256 + +// Config contains configuration data common to both ServerConfig and +// ClientConfig. +type Config struct { + // Rand provides the source of entropy for cryptographic + // primitives. If Rand is nil, the cryptographic random reader + // in package crypto/rand will be used. + Rand io.Reader + + // The maximum number of bytes sent or received after which a + // new key is negotiated. It must be at least 256. If + // unspecified, a size suitable for the chosen cipher is used. + RekeyThreshold uint64 + + // The allowed key exchanges algorithms. If unspecified then a + // default set of algorithms is used. + KeyExchanges []string + + // The allowed cipher algorithms. If unspecified then a sensible + // default is used. + Ciphers []string + + // The allowed MAC algorithms. If unspecified then a sensible default + // is used. + MACs []string +} + +// SetDefaults sets sensible values for unset fields in config. This is +// exported for testing: Configs passed to SSH functions are copied and have +// default values set automatically. +func (c *Config) SetDefaults() { + if c.Rand == nil { + c.Rand = rand.Reader + } + if c.Ciphers == nil { + c.Ciphers = preferredCiphers + } + var ciphers []string + for _, c := range c.Ciphers { + if cipherModes[c] != nil { + // reject the cipher if we have no cipherModes definition + ciphers = append(ciphers, c) + } + } + c.Ciphers = ciphers + + if c.KeyExchanges == nil { + c.KeyExchanges = supportedKexAlgos + } + + if c.MACs == nil { + c.MACs = supportedMACs + } + + if c.RekeyThreshold == 0 { + // cipher specific default + } else if c.RekeyThreshold < minRekeyThreshold { + c.RekeyThreshold = minRekeyThreshold + } else if c.RekeyThreshold >= math.MaxInt64 { + // Avoid weirdness if somebody uses -1 as a threshold. + c.RekeyThreshold = math.MaxInt64 + } +} + +// buildDataSignedForAuth returns the data that is signed in order to prove +// possession of a private key. See RFC 4252, section 7. +func buildDataSignedForAuth(sessionID []byte, req userAuthRequestMsg, algo, pubKey []byte) []byte { + data := struct { + Session []byte + Type byte + User string + Service string + Method string + Sign bool + Algo []byte + PubKey []byte + }{ + sessionID, + msgUserAuthRequest, + req.User, + req.Service, + req.Method, + true, + algo, + pubKey, + } + return Marshal(data) +} + +func appendU16(buf []byte, n uint16) []byte { + return append(buf, byte(n>>8), byte(n)) +} + +func appendU32(buf []byte, n uint32) []byte { + return append(buf, byte(n>>24), byte(n>>16), byte(n>>8), byte(n)) +} + +func appendU64(buf []byte, n uint64) []byte { + return append(buf, + byte(n>>56), byte(n>>48), byte(n>>40), byte(n>>32), + byte(n>>24), byte(n>>16), byte(n>>8), byte(n)) +} + +func appendInt(buf []byte, n int) []byte { + return appendU32(buf, uint32(n)) +} + +func appendString(buf []byte, s string) []byte { + buf = appendU32(buf, uint32(len(s))) + buf = append(buf, s...) + return buf +} + +func appendBool(buf []byte, b bool) []byte { + if b { + return append(buf, 1) + } + return append(buf, 0) +} + +// newCond is a helper to hide the fact that there is no usable zero +// value for sync.Cond. +func newCond() *sync.Cond { return sync.NewCond(new(sync.Mutex)) } + +// window represents the buffer available to clients +// wishing to write to a channel. +type window struct { + *sync.Cond + win uint32 // RFC 4254 5.2 says the window size can grow to 2^32-1 + writeWaiters int + closed bool +} + +// add adds win to the amount of window available +// for consumers. +func (w *window) add(win uint32) bool { + // a zero sized window adjust is a noop. + if win == 0 { + return true + } + w.L.Lock() + if w.win+win < win { + w.L.Unlock() + return false + } + w.win += win + // It is unusual that multiple goroutines would be attempting to reserve + // window space, but not guaranteed. Use broadcast to notify all waiters + // that additional window is available. + w.Broadcast() + w.L.Unlock() + return true +} + +// close sets the window to closed, so all reservations fail +// immediately. +func (w *window) close() { + w.L.Lock() + w.closed = true + w.Broadcast() + w.L.Unlock() +} + +// reserve reserves win from the available window capacity. +// If no capacity remains, reserve will block. reserve may +// return less than requested. +func (w *window) reserve(win uint32) (uint32, error) { + var err error + w.L.Lock() + w.writeWaiters++ + w.Broadcast() + for w.win == 0 && !w.closed { + w.Wait() + } + w.writeWaiters-- + if w.win < win { + win = w.win + } + w.win -= win + if w.closed { + err = io.EOF + } + w.L.Unlock() + return win, err +} + +// waitWriterBlocked waits until some goroutine is blocked for further +// writes. It is used in tests only. +func (w *window) waitWriterBlocked() { + w.Cond.L.Lock() + for w.writeWaiters == 0 { + w.Cond.Wait() + } + w.Cond.L.Unlock() +} diff --git a/vendor/golang.org/x/crypto/ssh/connection.go b/vendor/golang.org/x/crypto/ssh/connection.go new file mode 100644 index 0000000..fd6b068 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/connection.go @@ -0,0 +1,143 @@ +// Copyright 2013 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "fmt" + "net" +) + +// OpenChannelError is returned if the other side rejects an +// OpenChannel request. +type OpenChannelError struct { + Reason RejectionReason + Message string +} + +func (e *OpenChannelError) Error() string { + return fmt.Sprintf("ssh: rejected: %s (%s)", e.Reason, e.Message) +} + +// ConnMetadata holds metadata for the connection. +type ConnMetadata interface { + // User returns the user ID for this connection. + User() string + + // SessionID returns the session hash, also denoted by H. + SessionID() []byte + + // ClientVersion returns the client's version string as hashed + // into the session ID. + ClientVersion() []byte + + // ServerVersion returns the server's version string as hashed + // into the session ID. + ServerVersion() []byte + + // RemoteAddr returns the remote address for this connection. + RemoteAddr() net.Addr + + // LocalAddr returns the local address for this connection. + LocalAddr() net.Addr +} + +// Conn represents an SSH connection for both server and client roles. +// Conn is the basis for implementing an application layer, such +// as ClientConn, which implements the traditional shell access for +// clients. +type Conn interface { + ConnMetadata + + // SendRequest sends a global request, and returns the + // reply. If wantReply is true, it returns the response status + // and payload. See also RFC4254, section 4. + SendRequest(name string, wantReply bool, payload []byte) (bool, []byte, error) + + // OpenChannel tries to open an channel. If the request is + // rejected, it returns *OpenChannelError. On success it returns + // the SSH Channel and a Go channel for incoming, out-of-band + // requests. The Go channel must be serviced, or the + // connection will hang. + OpenChannel(name string, data []byte) (Channel, <-chan *Request, error) + + // Close closes the underlying network connection + Close() error + + // Wait blocks until the connection has shut down, and returns the + // error causing the shutdown. + Wait() error + + // TODO(hanwen): consider exposing: + // RequestKeyChange + // Disconnect +} + +// DiscardRequests consumes and rejects all requests from the +// passed-in channel. +func DiscardRequests(in <-chan *Request) { + for req := range in { + if req.WantReply { + req.Reply(false, nil) + } + } +} + +// A connection represents an incoming connection. +type connection struct { + transport *handshakeTransport + sshConn + + // The connection protocol. + *mux +} + +func (c *connection) Close() error { + return c.sshConn.conn.Close() +} + +// sshconn provides net.Conn metadata, but disallows direct reads and +// writes. +type sshConn struct { + conn net.Conn + + user string + sessionID []byte + clientVersion []byte + serverVersion []byte +} + +func dup(src []byte) []byte { + dst := make([]byte, len(src)) + copy(dst, src) + return dst +} + +func (c *sshConn) User() string { + return c.user +} + +func (c *sshConn) RemoteAddr() net.Addr { + return c.conn.RemoteAddr() +} + +func (c *sshConn) Close() error { + return c.conn.Close() +} + +func (c *sshConn) LocalAddr() net.Addr { + return c.conn.LocalAddr() +} + +func (c *sshConn) SessionID() []byte { + return dup(c.sessionID) +} + +func (c *sshConn) ClientVersion() []byte { + return dup(c.clientVersion) +} + +func (c *sshConn) ServerVersion() []byte { + return dup(c.serverVersion) +} diff --git a/vendor/golang.org/x/crypto/ssh/doc.go b/vendor/golang.org/x/crypto/ssh/doc.go new file mode 100644 index 0000000..67b7322 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/doc.go @@ -0,0 +1,21 @@ +// Copyright 2011 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +/* +Package ssh implements an SSH client and server. + +SSH is a transport security protocol, an authentication protocol and a +family of application protocols. The most typical application level +protocol is a remote shell and this is specifically implemented. However, +the multiplexed nature of SSH is exposed to users that wish to support +others. + +References: + [PROTOCOL.certkeys]: http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/usr.bin/ssh/PROTOCOL.certkeys?rev=HEAD + [SSH-PARAMETERS]: http://www.iana.org/assignments/ssh-parameters/ssh-parameters.xml#ssh-parameters-1 + +This package does not fall under the stability promise of the Go language itself, +so its API may be changed when pressing needs arise. +*/ +package ssh // import "golang.org/x/crypto/ssh" diff --git a/vendor/golang.org/x/crypto/ssh/handshake.go b/vendor/golang.org/x/crypto/ssh/handshake.go new file mode 100644 index 0000000..2b10b05 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/handshake.go @@ -0,0 +1,647 @@ +// Copyright 2013 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "crypto/rand" + "errors" + "fmt" + "io" + "log" + "net" + "sync" +) + +// debugHandshake, if set, prints messages sent and received. Key +// exchange messages are printed as if DH were used, so the debug +// messages are wrong when using ECDH. +const debugHandshake = false + +// chanSize sets the amount of buffering SSH connections. This is +// primarily for testing: setting chanSize=0 uncovers deadlocks more +// quickly. +const chanSize = 16 + +// keyingTransport is a packet based transport that supports key +// changes. It need not be thread-safe. It should pass through +// msgNewKeys in both directions. +type keyingTransport interface { + packetConn + + // prepareKeyChange sets up a key change. The key change for a + // direction will be effected if a msgNewKeys message is sent + // or received. + prepareKeyChange(*algorithms, *kexResult) error +} + +// handshakeTransport implements rekeying on top of a keyingTransport +// and offers a thread-safe writePacket() interface. +type handshakeTransport struct { + conn keyingTransport + config *Config + + serverVersion []byte + clientVersion []byte + + // hostKeys is non-empty if we are the server. In that case, + // it contains all host keys that can be used to sign the + // connection. + hostKeys []Signer + + // hostKeyAlgorithms is non-empty if we are the client. In that case, + // we accept these key types from the server as host key. + hostKeyAlgorithms []string + + // On read error, incoming is closed, and readError is set. + incoming chan []byte + readError error + + mu sync.Mutex + writeError error + sentInitPacket []byte + sentInitMsg *kexInitMsg + pendingPackets [][]byte // Used when a key exchange is in progress. + + // If the read loop wants to schedule a kex, it pings this + // channel, and the write loop will send out a kex + // message. + requestKex chan struct{} + + // If the other side requests or confirms a kex, its kexInit + // packet is sent here for the write loop to find it. + startKex chan *pendingKex + + // data for host key checking + hostKeyCallback HostKeyCallback + dialAddress string + remoteAddr net.Addr + + // bannerCallback is non-empty if we are the client and it has been set in + // ClientConfig. In that case it is called during the user authentication + // dance to handle a custom server's message. + bannerCallback BannerCallback + + // Algorithms agreed in the last key exchange. + algorithms *algorithms + + readPacketsLeft uint32 + readBytesLeft int64 + + writePacketsLeft uint32 + writeBytesLeft int64 + + // The session ID or nil if first kex did not complete yet. + sessionID []byte +} + +type pendingKex struct { + otherInit []byte + done chan error +} + +func newHandshakeTransport(conn keyingTransport, config *Config, clientVersion, serverVersion []byte) *handshakeTransport { + t := &handshakeTransport{ + conn: conn, + serverVersion: serverVersion, + clientVersion: clientVersion, + incoming: make(chan []byte, chanSize), + requestKex: make(chan struct{}, 1), + startKex: make(chan *pendingKex, 1), + + config: config, + } + t.resetReadThresholds() + t.resetWriteThresholds() + + // We always start with a mandatory key exchange. + t.requestKex <- struct{}{} + return t +} + +func newClientTransport(conn keyingTransport, clientVersion, serverVersion []byte, config *ClientConfig, dialAddr string, addr net.Addr) *handshakeTransport { + t := newHandshakeTransport(conn, &config.Config, clientVersion, serverVersion) + t.dialAddress = dialAddr + t.remoteAddr = addr + t.hostKeyCallback = config.HostKeyCallback + t.bannerCallback = config.BannerCallback + if config.HostKeyAlgorithms != nil { + t.hostKeyAlgorithms = config.HostKeyAlgorithms + } else { + t.hostKeyAlgorithms = supportedHostKeyAlgos + } + go t.readLoop() + go t.kexLoop() + return t +} + +func newServerTransport(conn keyingTransport, clientVersion, serverVersion []byte, config *ServerConfig) *handshakeTransport { + t := newHandshakeTransport(conn, &config.Config, clientVersion, serverVersion) + t.hostKeys = config.hostKeys + go t.readLoop() + go t.kexLoop() + return t +} + +func (t *handshakeTransport) getSessionID() []byte { + return t.sessionID +} + +// waitSession waits for the session to be established. This should be +// the first thing to call after instantiating handshakeTransport. +func (t *handshakeTransport) waitSession() error { + p, err := t.readPacket() + if err != nil { + return err + } + if p[0] != msgNewKeys { + return fmt.Errorf("ssh: first packet should be msgNewKeys") + } + + return nil +} + +func (t *handshakeTransport) id() string { + if len(t.hostKeys) > 0 { + return "server" + } + return "client" +} + +func (t *handshakeTransport) printPacket(p []byte, write bool) { + action := "got" + if write { + action = "sent" + } + + if p[0] == msgChannelData || p[0] == msgChannelExtendedData { + log.Printf("%s %s data (packet %d bytes)", t.id(), action, len(p)) + } else { + msg, err := decode(p) + log.Printf("%s %s %T %v (%v)", t.id(), action, msg, msg, err) + } +} + +func (t *handshakeTransport) readPacket() ([]byte, error) { + p, ok := <-t.incoming + if !ok { + return nil, t.readError + } + return p, nil +} + +func (t *handshakeTransport) readLoop() { + first := true + for { + p, err := t.readOnePacket(first) + first = false + if err != nil { + t.readError = err + close(t.incoming) + break + } + if p[0] == msgIgnore || p[0] == msgDebug { + continue + } + t.incoming <- p + } + + // Stop writers too. + t.recordWriteError(t.readError) + + // Unblock the writer should it wait for this. + close(t.startKex) + + // Don't close t.requestKex; it's also written to from writePacket. +} + +func (t *handshakeTransport) pushPacket(p []byte) error { + if debugHandshake { + t.printPacket(p, true) + } + return t.conn.writePacket(p) +} + +func (t *handshakeTransport) getWriteError() error { + t.mu.Lock() + defer t.mu.Unlock() + return t.writeError +} + +func (t *handshakeTransport) recordWriteError(err error) { + t.mu.Lock() + defer t.mu.Unlock() + if t.writeError == nil && err != nil { + t.writeError = err + } +} + +func (t *handshakeTransport) requestKeyExchange() { + select { + case t.requestKex <- struct{}{}: + default: + // something already requested a kex, so do nothing. + } +} + +func (t *handshakeTransport) resetWriteThresholds() { + t.writePacketsLeft = packetRekeyThreshold + if t.config.RekeyThreshold > 0 { + t.writeBytesLeft = int64(t.config.RekeyThreshold) + } else if t.algorithms != nil { + t.writeBytesLeft = t.algorithms.w.rekeyBytes() + } else { + t.writeBytesLeft = 1 << 30 + } +} + +func (t *handshakeTransport) kexLoop() { + +write: + for t.getWriteError() == nil { + var request *pendingKex + var sent bool + + for request == nil || !sent { + var ok bool + select { + case request, ok = <-t.startKex: + if !ok { + break write + } + case <-t.requestKex: + break + } + + if !sent { + if err := t.sendKexInit(); err != nil { + t.recordWriteError(err) + break + } + sent = true + } + } + + if err := t.getWriteError(); err != nil { + if request != nil { + request.done <- err + } + break + } + + // We're not servicing t.requestKex, but that is OK: + // we never block on sending to t.requestKex. + + // We're not servicing t.startKex, but the remote end + // has just sent us a kexInitMsg, so it can't send + // another key change request, until we close the done + // channel on the pendingKex request. + + err := t.enterKeyExchange(request.otherInit) + + t.mu.Lock() + t.writeError = err + t.sentInitPacket = nil + t.sentInitMsg = nil + + t.resetWriteThresholds() + + // we have completed the key exchange. Since the + // reader is still blocked, it is safe to clear out + // the requestKex channel. This avoids the situation + // where: 1) we consumed our own request for the + // initial kex, and 2) the kex from the remote side + // caused another send on the requestKex channel, + clear: + for { + select { + case <-t.requestKex: + // + default: + break clear + } + } + + request.done <- t.writeError + + // kex finished. Push packets that we received while + // the kex was in progress. Don't look at t.startKex + // and don't increment writtenSinceKex: if we trigger + // another kex while we are still busy with the last + // one, things will become very confusing. + for _, p := range t.pendingPackets { + t.writeError = t.pushPacket(p) + if t.writeError != nil { + break + } + } + t.pendingPackets = t.pendingPackets[:0] + t.mu.Unlock() + } + + // drain startKex channel. We don't service t.requestKex + // because nobody does blocking sends there. + go func() { + for init := range t.startKex { + init.done <- t.writeError + } + }() + + // Unblock reader. + t.conn.Close() +} + +// The protocol uses uint32 for packet counters, so we can't let them +// reach 1<<32. We will actually read and write more packets than +// this, though: the other side may send more packets, and after we +// hit this limit on writing we will send a few more packets for the +// key exchange itself. +const packetRekeyThreshold = (1 << 31) + +func (t *handshakeTransport) resetReadThresholds() { + t.readPacketsLeft = packetRekeyThreshold + if t.config.RekeyThreshold > 0 { + t.readBytesLeft = int64(t.config.RekeyThreshold) + } else if t.algorithms != nil { + t.readBytesLeft = t.algorithms.r.rekeyBytes() + } else { + t.readBytesLeft = 1 << 30 + } +} + +func (t *handshakeTransport) readOnePacket(first bool) ([]byte, error) { + p, err := t.conn.readPacket() + if err != nil { + return nil, err + } + + if t.readPacketsLeft > 0 { + t.readPacketsLeft-- + } else { + t.requestKeyExchange() + } + + if t.readBytesLeft > 0 { + t.readBytesLeft -= int64(len(p)) + } else { + t.requestKeyExchange() + } + + if debugHandshake { + t.printPacket(p, false) + } + + if first && p[0] != msgKexInit { + return nil, fmt.Errorf("ssh: first packet should be msgKexInit") + } + + if p[0] != msgKexInit { + return p, nil + } + + firstKex := t.sessionID == nil + + kex := pendingKex{ + done: make(chan error, 1), + otherInit: p, + } + t.startKex <- &kex + err = <-kex.done + + if debugHandshake { + log.Printf("%s exited key exchange (first %v), err %v", t.id(), firstKex, err) + } + + if err != nil { + return nil, err + } + + t.resetReadThresholds() + + // By default, a key exchange is hidden from higher layers by + // translating it into msgIgnore. + successPacket := []byte{msgIgnore} + if firstKex { + // sendKexInit() for the first kex waits for + // msgNewKeys so the authentication process is + // guaranteed to happen over an encrypted transport. + successPacket = []byte{msgNewKeys} + } + + return successPacket, nil +} + +// sendKexInit sends a key change message. +func (t *handshakeTransport) sendKexInit() error { + t.mu.Lock() + defer t.mu.Unlock() + if t.sentInitMsg != nil { + // kexInits may be sent either in response to the other side, + // or because our side wants to initiate a key change, so we + // may have already sent a kexInit. In that case, don't send a + // second kexInit. + return nil + } + + msg := &kexInitMsg{ + KexAlgos: t.config.KeyExchanges, + CiphersClientServer: t.config.Ciphers, + CiphersServerClient: t.config.Ciphers, + MACsClientServer: t.config.MACs, + MACsServerClient: t.config.MACs, + CompressionClientServer: supportedCompressions, + CompressionServerClient: supportedCompressions, + } + io.ReadFull(rand.Reader, msg.Cookie[:]) + + if len(t.hostKeys) > 0 { + for _, k := range t.hostKeys { + msg.ServerHostKeyAlgos = append( + msg.ServerHostKeyAlgos, k.PublicKey().Type()) + } + } else { + msg.ServerHostKeyAlgos = t.hostKeyAlgorithms + } + packet := Marshal(msg) + + // writePacket destroys the contents, so save a copy. + packetCopy := make([]byte, len(packet)) + copy(packetCopy, packet) + + if err := t.pushPacket(packetCopy); err != nil { + return err + } + + t.sentInitMsg = msg + t.sentInitPacket = packet + + return nil +} + +func (t *handshakeTransport) writePacket(p []byte) error { + switch p[0] { + case msgKexInit: + return errors.New("ssh: only handshakeTransport can send kexInit") + case msgNewKeys: + return errors.New("ssh: only handshakeTransport can send newKeys") + } + + t.mu.Lock() + defer t.mu.Unlock() + if t.writeError != nil { + return t.writeError + } + + if t.sentInitMsg != nil { + // Copy the packet so the writer can reuse the buffer. + cp := make([]byte, len(p)) + copy(cp, p) + t.pendingPackets = append(t.pendingPackets, cp) + return nil + } + + if t.writeBytesLeft > 0 { + t.writeBytesLeft -= int64(len(p)) + } else { + t.requestKeyExchange() + } + + if t.writePacketsLeft > 0 { + t.writePacketsLeft-- + } else { + t.requestKeyExchange() + } + + if err := t.pushPacket(p); err != nil { + t.writeError = err + } + + return nil +} + +func (t *handshakeTransport) Close() error { + return t.conn.Close() +} + +func (t *handshakeTransport) enterKeyExchange(otherInitPacket []byte) error { + if debugHandshake { + log.Printf("%s entered key exchange", t.id()) + } + + otherInit := &kexInitMsg{} + if err := Unmarshal(otherInitPacket, otherInit); err != nil { + return err + } + + magics := handshakeMagics{ + clientVersion: t.clientVersion, + serverVersion: t.serverVersion, + clientKexInit: otherInitPacket, + serverKexInit: t.sentInitPacket, + } + + clientInit := otherInit + serverInit := t.sentInitMsg + isClient := len(t.hostKeys) == 0 + if isClient { + clientInit, serverInit = serverInit, clientInit + + magics.clientKexInit = t.sentInitPacket + magics.serverKexInit = otherInitPacket + } + + var err error + t.algorithms, err = findAgreedAlgorithms(isClient, clientInit, serverInit) + if err != nil { + return err + } + + // We don't send FirstKexFollows, but we handle receiving it. + // + // RFC 4253 section 7 defines the kex and the agreement method for + // first_kex_packet_follows. It states that the guessed packet + // should be ignored if the "kex algorithm and/or the host + // key algorithm is guessed wrong (server and client have + // different preferred algorithm), or if any of the other + // algorithms cannot be agreed upon". The other algorithms have + // already been checked above so the kex algorithm and host key + // algorithm are checked here. + if otherInit.FirstKexFollows && (clientInit.KexAlgos[0] != serverInit.KexAlgos[0] || clientInit.ServerHostKeyAlgos[0] != serverInit.ServerHostKeyAlgos[0]) { + // other side sent a kex message for the wrong algorithm, + // which we have to ignore. + if _, err := t.conn.readPacket(); err != nil { + return err + } + } + + kex, ok := kexAlgoMap[t.algorithms.kex] + if !ok { + return fmt.Errorf("ssh: unexpected key exchange algorithm %v", t.algorithms.kex) + } + + var result *kexResult + if len(t.hostKeys) > 0 { + result, err = t.server(kex, t.algorithms, &magics) + } else { + result, err = t.client(kex, t.algorithms, &magics) + } + + if err != nil { + return err + } + + if t.sessionID == nil { + t.sessionID = result.H + } + result.SessionID = t.sessionID + + if err := t.conn.prepareKeyChange(t.algorithms, result); err != nil { + return err + } + if err = t.conn.writePacket([]byte{msgNewKeys}); err != nil { + return err + } + if packet, err := t.conn.readPacket(); err != nil { + return err + } else if packet[0] != msgNewKeys { + return unexpectedMessageError(msgNewKeys, packet[0]) + } + + return nil +} + +func (t *handshakeTransport) server(kex kexAlgorithm, algs *algorithms, magics *handshakeMagics) (*kexResult, error) { + var hostKey Signer + for _, k := range t.hostKeys { + if algs.hostKey == k.PublicKey().Type() { + hostKey = k + } + } + + r, err := kex.Server(t.conn, t.config.Rand, magics, hostKey) + return r, err +} + +func (t *handshakeTransport) client(kex kexAlgorithm, algs *algorithms, magics *handshakeMagics) (*kexResult, error) { + result, err := kex.Client(t.conn, t.config.Rand, magics) + if err != nil { + return nil, err + } + + hostKey, err := ParsePublicKey(result.HostKey) + if err != nil { + return nil, err + } + + if err := verifyHostKeySignature(hostKey, result); err != nil { + return nil, err + } + + err = t.hostKeyCallback(t.dialAddress, t.remoteAddr, hostKey) + if err != nil { + return nil, err + } + + return result, nil +} diff --git a/vendor/golang.org/x/crypto/ssh/kex.go b/vendor/golang.org/x/crypto/ssh/kex.go new file mode 100644 index 0000000..1607200 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/kex.go @@ -0,0 +1,789 @@ +// Copyright 2013 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "crypto" + "crypto/ecdsa" + "crypto/elliptic" + "crypto/rand" + "crypto/subtle" + "encoding/binary" + "errors" + "fmt" + "io" + "math/big" + + "golang.org/x/crypto/curve25519" +) + +const ( + kexAlgoDH1SHA1 = "diffie-hellman-group1-sha1" + kexAlgoDH14SHA1 = "diffie-hellman-group14-sha1" + kexAlgoECDH256 = "ecdh-sha2-nistp256" + kexAlgoECDH384 = "ecdh-sha2-nistp384" + kexAlgoECDH521 = "ecdh-sha2-nistp521" + kexAlgoCurve25519SHA256 = "curve25519-sha256@libssh.org" + + // For the following kex only the client half contains a production + // ready implementation. The server half only consists of a minimal + // implementation to satisfy the automated tests. + kexAlgoDHGEXSHA1 = "diffie-hellman-group-exchange-sha1" + kexAlgoDHGEXSHA256 = "diffie-hellman-group-exchange-sha256" +) + +// kexResult captures the outcome of a key exchange. +type kexResult struct { + // Session hash. See also RFC 4253, section 8. + H []byte + + // Shared secret. See also RFC 4253, section 8. + K []byte + + // Host key as hashed into H. + HostKey []byte + + // Signature of H. + Signature []byte + + // A cryptographic hash function that matches the security + // level of the key exchange algorithm. It is used for + // calculating H, and for deriving keys from H and K. + Hash crypto.Hash + + // The session ID, which is the first H computed. This is used + // to derive key material inside the transport. + SessionID []byte +} + +// handshakeMagics contains data that is always included in the +// session hash. +type handshakeMagics struct { + clientVersion, serverVersion []byte + clientKexInit, serverKexInit []byte +} + +func (m *handshakeMagics) write(w io.Writer) { + writeString(w, m.clientVersion) + writeString(w, m.serverVersion) + writeString(w, m.clientKexInit) + writeString(w, m.serverKexInit) +} + +// kexAlgorithm abstracts different key exchange algorithms. +type kexAlgorithm interface { + // Server runs server-side key agreement, signing the result + // with a hostkey. + Server(p packetConn, rand io.Reader, magics *handshakeMagics, s Signer) (*kexResult, error) + + // Client runs the client-side key agreement. Caller is + // responsible for verifying the host key signature. + Client(p packetConn, rand io.Reader, magics *handshakeMagics) (*kexResult, error) +} + +// dhGroup is a multiplicative group suitable for implementing Diffie-Hellman key agreement. +type dhGroup struct { + g, p, pMinus1 *big.Int +} + +func (group *dhGroup) diffieHellman(theirPublic, myPrivate *big.Int) (*big.Int, error) { + if theirPublic.Cmp(bigOne) <= 0 || theirPublic.Cmp(group.pMinus1) >= 0 { + return nil, errors.New("ssh: DH parameter out of bounds") + } + return new(big.Int).Exp(theirPublic, myPrivate, group.p), nil +} + +func (group *dhGroup) Client(c packetConn, randSource io.Reader, magics *handshakeMagics) (*kexResult, error) { + hashFunc := crypto.SHA1 + + var x *big.Int + for { + var err error + if x, err = rand.Int(randSource, group.pMinus1); err != nil { + return nil, err + } + if x.Sign() > 0 { + break + } + } + + X := new(big.Int).Exp(group.g, x, group.p) + kexDHInit := kexDHInitMsg{ + X: X, + } + if err := c.writePacket(Marshal(&kexDHInit)); err != nil { + return nil, err + } + + packet, err := c.readPacket() + if err != nil { + return nil, err + } + + var kexDHReply kexDHReplyMsg + if err = Unmarshal(packet, &kexDHReply); err != nil { + return nil, err + } + + ki, err := group.diffieHellman(kexDHReply.Y, x) + if err != nil { + return nil, err + } + + h := hashFunc.New() + magics.write(h) + writeString(h, kexDHReply.HostKey) + writeInt(h, X) + writeInt(h, kexDHReply.Y) + K := make([]byte, intLength(ki)) + marshalInt(K, ki) + h.Write(K) + + return &kexResult{ + H: h.Sum(nil), + K: K, + HostKey: kexDHReply.HostKey, + Signature: kexDHReply.Signature, + Hash: crypto.SHA1, + }, nil +} + +func (group *dhGroup) Server(c packetConn, randSource io.Reader, magics *handshakeMagics, priv Signer) (result *kexResult, err error) { + hashFunc := crypto.SHA1 + packet, err := c.readPacket() + if err != nil { + return + } + var kexDHInit kexDHInitMsg + if err = Unmarshal(packet, &kexDHInit); err != nil { + return + } + + var y *big.Int + for { + if y, err = rand.Int(randSource, group.pMinus1); err != nil { + return + } + if y.Sign() > 0 { + break + } + } + + Y := new(big.Int).Exp(group.g, y, group.p) + ki, err := group.diffieHellman(kexDHInit.X, y) + if err != nil { + return nil, err + } + + hostKeyBytes := priv.PublicKey().Marshal() + + h := hashFunc.New() + magics.write(h) + writeString(h, hostKeyBytes) + writeInt(h, kexDHInit.X) + writeInt(h, Y) + + K := make([]byte, intLength(ki)) + marshalInt(K, ki) + h.Write(K) + + H := h.Sum(nil) + + // H is already a hash, but the hostkey signing will apply its + // own key-specific hash algorithm. + sig, err := signAndMarshal(priv, randSource, H) + if err != nil { + return nil, err + } + + kexDHReply := kexDHReplyMsg{ + HostKey: hostKeyBytes, + Y: Y, + Signature: sig, + } + packet = Marshal(&kexDHReply) + + err = c.writePacket(packet) + return &kexResult{ + H: H, + K: K, + HostKey: hostKeyBytes, + Signature: sig, + Hash: crypto.SHA1, + }, nil +} + +// ecdh performs Elliptic Curve Diffie-Hellman key exchange as +// described in RFC 5656, section 4. +type ecdh struct { + curve elliptic.Curve +} + +func (kex *ecdh) Client(c packetConn, rand io.Reader, magics *handshakeMagics) (*kexResult, error) { + ephKey, err := ecdsa.GenerateKey(kex.curve, rand) + if err != nil { + return nil, err + } + + kexInit := kexECDHInitMsg{ + ClientPubKey: elliptic.Marshal(kex.curve, ephKey.PublicKey.X, ephKey.PublicKey.Y), + } + + serialized := Marshal(&kexInit) + if err := c.writePacket(serialized); err != nil { + return nil, err + } + + packet, err := c.readPacket() + if err != nil { + return nil, err + } + + var reply kexECDHReplyMsg + if err = Unmarshal(packet, &reply); err != nil { + return nil, err + } + + x, y, err := unmarshalECKey(kex.curve, reply.EphemeralPubKey) + if err != nil { + return nil, err + } + + // generate shared secret + secret, _ := kex.curve.ScalarMult(x, y, ephKey.D.Bytes()) + + h := ecHash(kex.curve).New() + magics.write(h) + writeString(h, reply.HostKey) + writeString(h, kexInit.ClientPubKey) + writeString(h, reply.EphemeralPubKey) + K := make([]byte, intLength(secret)) + marshalInt(K, secret) + h.Write(K) + + return &kexResult{ + H: h.Sum(nil), + K: K, + HostKey: reply.HostKey, + Signature: reply.Signature, + Hash: ecHash(kex.curve), + }, nil +} + +// unmarshalECKey parses and checks an EC key. +func unmarshalECKey(curve elliptic.Curve, pubkey []byte) (x, y *big.Int, err error) { + x, y = elliptic.Unmarshal(curve, pubkey) + if x == nil { + return nil, nil, errors.New("ssh: elliptic.Unmarshal failure") + } + if !validateECPublicKey(curve, x, y) { + return nil, nil, errors.New("ssh: public key not on curve") + } + return x, y, nil +} + +// validateECPublicKey checks that the point is a valid public key for +// the given curve. See [SEC1], 3.2.2 +func validateECPublicKey(curve elliptic.Curve, x, y *big.Int) bool { + if x.Sign() == 0 && y.Sign() == 0 { + return false + } + + if x.Cmp(curve.Params().P) >= 0 { + return false + } + + if y.Cmp(curve.Params().P) >= 0 { + return false + } + + if !curve.IsOnCurve(x, y) { + return false + } + + // We don't check if N * PubKey == 0, since + // + // - the NIST curves have cofactor = 1, so this is implicit. + // (We don't foresee an implementation that supports non NIST + // curves) + // + // - for ephemeral keys, we don't need to worry about small + // subgroup attacks. + return true +} + +func (kex *ecdh) Server(c packetConn, rand io.Reader, magics *handshakeMagics, priv Signer) (result *kexResult, err error) { + packet, err := c.readPacket() + if err != nil { + return nil, err + } + + var kexECDHInit kexECDHInitMsg + if err = Unmarshal(packet, &kexECDHInit); err != nil { + return nil, err + } + + clientX, clientY, err := unmarshalECKey(kex.curve, kexECDHInit.ClientPubKey) + if err != nil { + return nil, err + } + + // We could cache this key across multiple users/multiple + // connection attempts, but the benefit is small. OpenSSH + // generates a new key for each incoming connection. + ephKey, err := ecdsa.GenerateKey(kex.curve, rand) + if err != nil { + return nil, err + } + + hostKeyBytes := priv.PublicKey().Marshal() + + serializedEphKey := elliptic.Marshal(kex.curve, ephKey.PublicKey.X, ephKey.PublicKey.Y) + + // generate shared secret + secret, _ := kex.curve.ScalarMult(clientX, clientY, ephKey.D.Bytes()) + + h := ecHash(kex.curve).New() + magics.write(h) + writeString(h, hostKeyBytes) + writeString(h, kexECDHInit.ClientPubKey) + writeString(h, serializedEphKey) + + K := make([]byte, intLength(secret)) + marshalInt(K, secret) + h.Write(K) + + H := h.Sum(nil) + + // H is already a hash, but the hostkey signing will apply its + // own key-specific hash algorithm. + sig, err := signAndMarshal(priv, rand, H) + if err != nil { + return nil, err + } + + reply := kexECDHReplyMsg{ + EphemeralPubKey: serializedEphKey, + HostKey: hostKeyBytes, + Signature: sig, + } + + serialized := Marshal(&reply) + if err := c.writePacket(serialized); err != nil { + return nil, err + } + + return &kexResult{ + H: H, + K: K, + HostKey: reply.HostKey, + Signature: sig, + Hash: ecHash(kex.curve), + }, nil +} + +var kexAlgoMap = map[string]kexAlgorithm{} + +func init() { + // This is the group called diffie-hellman-group1-sha1 in RFC + // 4253 and Oakley Group 2 in RFC 2409. + p, _ := new(big.Int).SetString("FFFFFFFFFFFFFFFFC90FDAA22168C234C4C6628B80DC1CD129024E088A67CC74020BBEA63B139B22514A08798E3404DDEF9519B3CD3A431B302B0A6DF25F14374FE1356D6D51C245E485B576625E7EC6F44C42E9A637ED6B0BFF5CB6F406B7EDEE386BFB5A899FA5AE9F24117C4B1FE649286651ECE65381FFFFFFFFFFFFFFFF", 16) + kexAlgoMap[kexAlgoDH1SHA1] = &dhGroup{ + g: new(big.Int).SetInt64(2), + p: p, + pMinus1: new(big.Int).Sub(p, bigOne), + } + + // This is the group called diffie-hellman-group14-sha1 in RFC + // 4253 and Oakley Group 14 in RFC 3526. + p, _ = new(big.Int).SetString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kexAlgoMap[kexAlgoDH14SHA1] = &dhGroup{ + g: new(big.Int).SetInt64(2), + p: p, + pMinus1: new(big.Int).Sub(p, bigOne), + } + + kexAlgoMap[kexAlgoECDH521] = &ecdh{elliptic.P521()} + kexAlgoMap[kexAlgoECDH384] = &ecdh{elliptic.P384()} + kexAlgoMap[kexAlgoECDH256] = &ecdh{elliptic.P256()} + kexAlgoMap[kexAlgoCurve25519SHA256] = &curve25519sha256{} + kexAlgoMap[kexAlgoDHGEXSHA1] = &dhGEXSHA{hashFunc: crypto.SHA1} + kexAlgoMap[kexAlgoDHGEXSHA256] = &dhGEXSHA{hashFunc: crypto.SHA256} +} + +// curve25519sha256 implements the curve25519-sha256@libssh.org key +// agreement protocol, as described in +// https://git.libssh.org/projects/libssh.git/tree/doc/curve25519-sha256@libssh.org.txt +type curve25519sha256 struct{} + +type curve25519KeyPair struct { + priv [32]byte + pub [32]byte +} + +func (kp *curve25519KeyPair) generate(rand io.Reader) error { + if _, err := io.ReadFull(rand, kp.priv[:]); err != nil { + return err + } + curve25519.ScalarBaseMult(&kp.pub, &kp.priv) + return nil +} + +// curve25519Zeros is just an array of 32 zero bytes so that we have something +// convenient to compare against in order to reject curve25519 points with the +// wrong order. +var curve25519Zeros [32]byte + +func (kex *curve25519sha256) Client(c packetConn, rand io.Reader, magics *handshakeMagics) (*kexResult, error) { + var kp curve25519KeyPair + if err := kp.generate(rand); err != nil { + return nil, err + } + if err := c.writePacket(Marshal(&kexECDHInitMsg{kp.pub[:]})); err != nil { + return nil, err + } + + packet, err := c.readPacket() + if err != nil { + return nil, err + } + + var reply kexECDHReplyMsg + if err = Unmarshal(packet, &reply); err != nil { + return nil, err + } + if len(reply.EphemeralPubKey) != 32 { + return nil, errors.New("ssh: peer's curve25519 public value has wrong length") + } + + var servPub, secret [32]byte + copy(servPub[:], reply.EphemeralPubKey) + curve25519.ScalarMult(&secret, &kp.priv, &servPub) + if subtle.ConstantTimeCompare(secret[:], curve25519Zeros[:]) == 1 { + return nil, errors.New("ssh: peer's curve25519 public value has wrong order") + } + + h := crypto.SHA256.New() + magics.write(h) + writeString(h, reply.HostKey) + writeString(h, kp.pub[:]) + writeString(h, reply.EphemeralPubKey) + + ki := new(big.Int).SetBytes(secret[:]) + K := make([]byte, intLength(ki)) + marshalInt(K, ki) + h.Write(K) + + return &kexResult{ + H: h.Sum(nil), + K: K, + HostKey: reply.HostKey, + Signature: reply.Signature, + Hash: crypto.SHA256, + }, nil +} + +func (kex *curve25519sha256) Server(c packetConn, rand io.Reader, magics *handshakeMagics, priv Signer) (result *kexResult, err error) { + packet, err := c.readPacket() + if err != nil { + return + } + var kexInit kexECDHInitMsg + if err = Unmarshal(packet, &kexInit); err != nil { + return + } + + if len(kexInit.ClientPubKey) != 32 { + return nil, errors.New("ssh: peer's curve25519 public value has wrong length") + } + + var kp curve25519KeyPair + if err := kp.generate(rand); err != nil { + return nil, err + } + + var clientPub, secret [32]byte + copy(clientPub[:], kexInit.ClientPubKey) + curve25519.ScalarMult(&secret, &kp.priv, &clientPub) + if subtle.ConstantTimeCompare(secret[:], curve25519Zeros[:]) == 1 { + return nil, errors.New("ssh: peer's curve25519 public value has wrong order") + } + + hostKeyBytes := priv.PublicKey().Marshal() + + h := crypto.SHA256.New() + magics.write(h) + writeString(h, hostKeyBytes) + writeString(h, kexInit.ClientPubKey) + writeString(h, kp.pub[:]) + + ki := new(big.Int).SetBytes(secret[:]) + K := make([]byte, intLength(ki)) + marshalInt(K, ki) + h.Write(K) + + H := h.Sum(nil) + + sig, err := signAndMarshal(priv, rand, H) + if err != nil { + return nil, err + } + + reply := kexECDHReplyMsg{ + EphemeralPubKey: kp.pub[:], + HostKey: hostKeyBytes, + Signature: sig, + } + if err := c.writePacket(Marshal(&reply)); err != nil { + return nil, err + } + return &kexResult{ + H: H, + K: K, + HostKey: hostKeyBytes, + Signature: sig, + Hash: crypto.SHA256, + }, nil +} + +// dhGEXSHA implements the diffie-hellman-group-exchange-sha1 and +// diffie-hellman-group-exchange-sha256 key agreement protocols, +// as described in RFC 4419 +type dhGEXSHA struct { + g, p *big.Int + hashFunc crypto.Hash +} + +const numMRTests = 64 + +const ( + dhGroupExchangeMinimumBits = 2048 + dhGroupExchangePreferredBits = 2048 + dhGroupExchangeMaximumBits = 8192 +) + +func (gex *dhGEXSHA) diffieHellman(theirPublic, myPrivate *big.Int) (*big.Int, error) { + if theirPublic.Sign() <= 0 || theirPublic.Cmp(gex.p) >= 0 { + return nil, fmt.Errorf("ssh: DH parameter out of bounds") + } + return new(big.Int).Exp(theirPublic, myPrivate, gex.p), nil +} + +func (gex *dhGEXSHA) Client(c packetConn, randSource io.Reader, magics *handshakeMagics) (*kexResult, error) { + // Send GexRequest + kexDHGexRequest := kexDHGexRequestMsg{ + MinBits: dhGroupExchangeMinimumBits, + PreferedBits: dhGroupExchangePreferredBits, + MaxBits: dhGroupExchangeMaximumBits, + } + if err := c.writePacket(Marshal(&kexDHGexRequest)); err != nil { + return nil, err + } + + // Receive GexGroup + packet, err := c.readPacket() + if err != nil { + return nil, err + } + + var kexDHGexGroup kexDHGexGroupMsg + if err = Unmarshal(packet, &kexDHGexGroup); err != nil { + return nil, err + } + + // reject if p's bit length < dhGroupExchangeMinimumBits or > dhGroupExchangeMaximumBits + if kexDHGexGroup.P.BitLen() < dhGroupExchangeMinimumBits || kexDHGexGroup.P.BitLen() > dhGroupExchangeMaximumBits { + return nil, fmt.Errorf("ssh: server-generated gex p is out of range (%d bits)", kexDHGexGroup.P.BitLen()) + } + + gex.p = kexDHGexGroup.P + gex.g = kexDHGexGroup.G + + // Check if p is safe by verifing that p and (p-1)/2 are primes + one := big.NewInt(1) + var pHalf = &big.Int{} + pHalf.Rsh(gex.p, 1) + if !gex.p.ProbablyPrime(numMRTests) || !pHalf.ProbablyPrime(numMRTests) { + return nil, fmt.Errorf("ssh: server provided gex p is not safe") + } + + // Check if g is safe by verifing that g > 1 and g < p - 1 + var pMinusOne = &big.Int{} + pMinusOne.Sub(gex.p, one) + if gex.g.Cmp(one) != 1 && gex.g.Cmp(pMinusOne) != -1 { + return nil, fmt.Errorf("ssh: server provided gex g is not safe") + } + + // Send GexInit + x, err := rand.Int(randSource, pHalf) + if err != nil { + return nil, err + } + X := new(big.Int).Exp(gex.g, x, gex.p) + kexDHGexInit := kexDHGexInitMsg{ + X: X, + } + if err := c.writePacket(Marshal(&kexDHGexInit)); err != nil { + return nil, err + } + + // Receive GexReply + packet, err = c.readPacket() + if err != nil { + return nil, err + } + + var kexDHGexReply kexDHGexReplyMsg + if err = Unmarshal(packet, &kexDHGexReply); err != nil { + return nil, err + } + + kInt, err := gex.diffieHellman(kexDHGexReply.Y, x) + if err != nil { + return nil, err + } + + // Check if k is safe by verifing that k > 1 and k < p - 1 + if kInt.Cmp(one) != 1 && kInt.Cmp(pMinusOne) != -1 { + return nil, fmt.Errorf("ssh: derived k is not safe") + } + + h := gex.hashFunc.New() + magics.write(h) + writeString(h, kexDHGexReply.HostKey) + binary.Write(h, binary.BigEndian, uint32(dhGroupExchangeMinimumBits)) + binary.Write(h, binary.BigEndian, uint32(dhGroupExchangePreferredBits)) + binary.Write(h, binary.BigEndian, uint32(dhGroupExchangeMaximumBits)) + writeInt(h, gex.p) + writeInt(h, gex.g) + writeInt(h, X) + writeInt(h, kexDHGexReply.Y) + K := make([]byte, intLength(kInt)) + marshalInt(K, kInt) + h.Write(K) + + return &kexResult{ + H: h.Sum(nil), + K: K, + HostKey: kexDHGexReply.HostKey, + Signature: kexDHGexReply.Signature, + Hash: gex.hashFunc, + }, nil +} + +// Server half implementation of the Diffie Hellman Key Exchange with SHA1 and SHA256. +// +// This is a minimal implementation to satisfy the automated tests. +func (gex *dhGEXSHA) Server(c packetConn, randSource io.Reader, magics *handshakeMagics, priv Signer) (result *kexResult, err error) { + // Receive GexRequest + packet, err := c.readPacket() + if err != nil { + return + } + var kexDHGexRequest kexDHGexRequestMsg + if err = Unmarshal(packet, &kexDHGexRequest); err != nil { + return + } + + // smoosh the user's preferred size into our own limits + if kexDHGexRequest.PreferedBits > dhGroupExchangeMaximumBits { + kexDHGexRequest.PreferedBits = dhGroupExchangeMaximumBits + } + if kexDHGexRequest.PreferedBits < dhGroupExchangeMinimumBits { + kexDHGexRequest.PreferedBits = dhGroupExchangeMinimumBits + } + // fix min/max if they're inconsistent. technically, we could just pout + // and hang up, but there's no harm in giving them the benefit of the + // doubt and just picking a bitsize for them. + if kexDHGexRequest.MinBits > kexDHGexRequest.PreferedBits { + kexDHGexRequest.MinBits = kexDHGexRequest.PreferedBits + } + if kexDHGexRequest.MaxBits < kexDHGexRequest.PreferedBits { + kexDHGexRequest.MaxBits = kexDHGexRequest.PreferedBits + } + + // Send GexGroup + // This is the group called diffie-hellman-group14-sha1 in RFC + // 4253 and Oakley Group 14 in RFC 3526. + p, _ := new(big.Int).SetString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gex.p = p + gex.g = big.NewInt(2) + + kexDHGexGroup := kexDHGexGroupMsg{ + P: gex.p, + G: gex.g, + } + if err := c.writePacket(Marshal(&kexDHGexGroup)); err != nil { + return nil, err + } + + // Receive GexInit + packet, err = c.readPacket() + if err != nil { + return + } + var kexDHGexInit kexDHGexInitMsg + if err = Unmarshal(packet, &kexDHGexInit); err != nil { + return + } + + var pHalf = &big.Int{} + pHalf.Rsh(gex.p, 1) + + y, err := rand.Int(randSource, pHalf) + if err != nil { + return + } + + Y := new(big.Int).Exp(gex.g, y, gex.p) + kInt, err := gex.diffieHellman(kexDHGexInit.X, y) + if err != nil { + return nil, err + } + + hostKeyBytes := priv.PublicKey().Marshal() + + h := gex.hashFunc.New() + magics.write(h) + writeString(h, hostKeyBytes) + binary.Write(h, binary.BigEndian, uint32(dhGroupExchangeMinimumBits)) + binary.Write(h, binary.BigEndian, uint32(dhGroupExchangePreferredBits)) + binary.Write(h, binary.BigEndian, uint32(dhGroupExchangeMaximumBits)) + writeInt(h, gex.p) + writeInt(h, gex.g) + writeInt(h, kexDHGexInit.X) + writeInt(h, Y) + + K := make([]byte, intLength(kInt)) + marshalInt(K, kInt) + h.Write(K) + + H := h.Sum(nil) + + // H is already a hash, but the hostkey signing will apply its + // own key-specific hash algorithm. + sig, err := signAndMarshal(priv, randSource, H) + if err != nil { + return nil, err + } + + kexDHGexReply := kexDHGexReplyMsg{ + HostKey: hostKeyBytes, + Y: Y, + Signature: sig, + } + packet = Marshal(&kexDHGexReply) + + err = c.writePacket(packet) + + return &kexResult{ + H: H, + K: K, + HostKey: hostKeyBytes, + Signature: sig, + Hash: gex.hashFunc, + }, err +} diff --git a/vendor/golang.org/x/crypto/ssh/keys.go b/vendor/golang.org/x/crypto/ssh/keys.go new file mode 100644 index 0000000..9698047 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/keys.go @@ -0,0 +1,1100 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "bytes" + "crypto" + "crypto/dsa" + "crypto/ecdsa" + "crypto/elliptic" + "crypto/md5" + "crypto/rsa" + "crypto/sha256" + "crypto/x509" + "encoding/asn1" + "encoding/base64" + "encoding/hex" + "encoding/pem" + "errors" + "fmt" + "io" + "math/big" + "strings" + + "golang.org/x/crypto/ed25519" +) + +// These constants represent the algorithm names for key types supported by this +// package. +const ( + KeyAlgoRSA = "ssh-rsa" + KeyAlgoDSA = "ssh-dss" + KeyAlgoECDSA256 = "ecdsa-sha2-nistp256" + KeyAlgoECDSA384 = "ecdsa-sha2-nistp384" + KeyAlgoECDSA521 = "ecdsa-sha2-nistp521" + KeyAlgoED25519 = "ssh-ed25519" +) + +// These constants represent non-default signature algorithms that are supported +// as algorithm parameters to AlgorithmSigner.SignWithAlgorithm methods. See +// [PROTOCOL.agent] section 4.5.1 and +// https://tools.ietf.org/html/draft-ietf-curdle-rsa-sha2-10 +const ( + SigAlgoRSA = "ssh-rsa" + SigAlgoRSASHA2256 = "rsa-sha2-256" + SigAlgoRSASHA2512 = "rsa-sha2-512" +) + +// parsePubKey parses a public key of the given algorithm. +// Use ParsePublicKey for keys with prepended algorithm. +func parsePubKey(in []byte, algo string) (pubKey PublicKey, rest []byte, err error) { + switch algo { + case KeyAlgoRSA: + return parseRSA(in) + case KeyAlgoDSA: + return parseDSA(in) + case KeyAlgoECDSA256, KeyAlgoECDSA384, KeyAlgoECDSA521: + return parseECDSA(in) + case KeyAlgoED25519: + return parseED25519(in) + case CertAlgoRSAv01, CertAlgoDSAv01, CertAlgoECDSA256v01, CertAlgoECDSA384v01, CertAlgoECDSA521v01, CertAlgoED25519v01: + cert, err := parseCert(in, certToPrivAlgo(algo)) + if err != nil { + return nil, nil, err + } + return cert, nil, nil + } + return nil, nil, fmt.Errorf("ssh: unknown key algorithm: %v", algo) +} + +// parseAuthorizedKey parses a public key in OpenSSH authorized_keys format +// (see sshd(8) manual page) once the options and key type fields have been +// removed. +func parseAuthorizedKey(in []byte) (out PublicKey, comment string, err error) { + in = bytes.TrimSpace(in) + + i := bytes.IndexAny(in, " \t") + if i == -1 { + i = len(in) + } + base64Key := in[:i] + + key := make([]byte, base64.StdEncoding.DecodedLen(len(base64Key))) + n, err := base64.StdEncoding.Decode(key, base64Key) + if err != nil { + return nil, "", err + } + key = key[:n] + out, err = ParsePublicKey(key) + if err != nil { + return nil, "", err + } + comment = string(bytes.TrimSpace(in[i:])) + return out, comment, nil +} + +// ParseKnownHosts parses an entry in the format of the known_hosts file. +// +// The known_hosts format is documented in the sshd(8) manual page. This +// function will parse a single entry from in. On successful return, marker +// will contain the optional marker value (i.e. "cert-authority" or "revoked") +// or else be empty, hosts will contain the hosts that this entry matches, +// pubKey will contain the public key and comment will contain any trailing +// comment at the end of the line. See the sshd(8) manual page for the various +// forms that a host string can take. +// +// The unparsed remainder of the input will be returned in rest. This function +// can be called repeatedly to parse multiple entries. +// +// If no entries were found in the input then err will be io.EOF. Otherwise a +// non-nil err value indicates a parse error. +func ParseKnownHosts(in []byte) (marker string, hosts []string, pubKey PublicKey, comment string, rest []byte, err error) { + for len(in) > 0 { + end := bytes.IndexByte(in, '\n') + if end != -1 { + rest = in[end+1:] + in = in[:end] + } else { + rest = nil + } + + end = bytes.IndexByte(in, '\r') + if end != -1 { + in = in[:end] + } + + in = bytes.TrimSpace(in) + if len(in) == 0 || in[0] == '#' { + in = rest + continue + } + + i := bytes.IndexAny(in, " \t") + if i == -1 { + in = rest + continue + } + + // Strip out the beginning of the known_host key. + // This is either an optional marker or a (set of) hostname(s). + keyFields := bytes.Fields(in) + if len(keyFields) < 3 || len(keyFields) > 5 { + return "", nil, nil, "", nil, errors.New("ssh: invalid entry in known_hosts data") + } + + // keyFields[0] is either "@cert-authority", "@revoked" or a comma separated + // list of hosts + marker := "" + if keyFields[0][0] == '@' { + marker = string(keyFields[0][1:]) + keyFields = keyFields[1:] + } + + hosts := string(keyFields[0]) + // keyFields[1] contains the key type (e.g. “ssh-rsa”). + // However, that information is duplicated inside the + // base64-encoded key and so is ignored here. + + key := bytes.Join(keyFields[2:], []byte(" ")) + if pubKey, comment, err = parseAuthorizedKey(key); err != nil { + return "", nil, nil, "", nil, err + } + + return marker, strings.Split(hosts, ","), pubKey, comment, rest, nil + } + + return "", nil, nil, "", nil, io.EOF +} + +// ParseAuthorizedKeys parses a public key from an authorized_keys +// file used in OpenSSH according to the sshd(8) manual page. +func ParseAuthorizedKey(in []byte) (out PublicKey, comment string, options []string, rest []byte, err error) { + for len(in) > 0 { + end := bytes.IndexByte(in, '\n') + if end != -1 { + rest = in[end+1:] + in = in[:end] + } else { + rest = nil + } + + end = bytes.IndexByte(in, '\r') + if end != -1 { + in = in[:end] + } + + in = bytes.TrimSpace(in) + if len(in) == 0 || in[0] == '#' { + in = rest + continue + } + + i := bytes.IndexAny(in, " \t") + if i == -1 { + in = rest + continue + } + + if out, comment, err = parseAuthorizedKey(in[i:]); err == nil { + return out, comment, options, rest, nil + } + + // No key type recognised. Maybe there's an options field at + // the beginning. + var b byte + inQuote := false + var candidateOptions []string + optionStart := 0 + for i, b = range in { + isEnd := !inQuote && (b == ' ' || b == '\t') + if (b == ',' && !inQuote) || isEnd { + if i-optionStart > 0 { + candidateOptions = append(candidateOptions, string(in[optionStart:i])) + } + optionStart = i + 1 + } + if isEnd { + break + } + if b == '"' && (i == 0 || (i > 0 && in[i-1] != '\\')) { + inQuote = !inQuote + } + } + for i < len(in) && (in[i] == ' ' || in[i] == '\t') { + i++ + } + if i == len(in) { + // Invalid line: unmatched quote + in = rest + continue + } + + in = in[i:] + i = bytes.IndexAny(in, " \t") + if i == -1 { + in = rest + continue + } + + if out, comment, err = parseAuthorizedKey(in[i:]); err == nil { + options = candidateOptions + return out, comment, options, rest, nil + } + + in = rest + continue + } + + return nil, "", nil, nil, errors.New("ssh: no key found") +} + +// ParsePublicKey parses an SSH public key formatted for use in +// the SSH wire protocol according to RFC 4253, section 6.6. +func ParsePublicKey(in []byte) (out PublicKey, err error) { + algo, in, ok := parseString(in) + if !ok { + return nil, errShortRead + } + var rest []byte + out, rest, err = parsePubKey(in, string(algo)) + if len(rest) > 0 { + return nil, errors.New("ssh: trailing junk in public key") + } + + return out, err +} + +// MarshalAuthorizedKey serializes key for inclusion in an OpenSSH +// authorized_keys file. The return value ends with newline. +func MarshalAuthorizedKey(key PublicKey) []byte { + b := &bytes.Buffer{} + b.WriteString(key.Type()) + b.WriteByte(' ') + e := base64.NewEncoder(base64.StdEncoding, b) + e.Write(key.Marshal()) + e.Close() + b.WriteByte('\n') + return b.Bytes() +} + +// PublicKey is an abstraction of different types of public keys. +type PublicKey interface { + // Type returns the key's type, e.g. "ssh-rsa". + Type() string + + // Marshal returns the serialized key data in SSH wire format, + // with the name prefix. To unmarshal the returned data, use + // the ParsePublicKey function. + Marshal() []byte + + // Verify that sig is a signature on the given data using this + // key. This function will hash the data appropriately first. + Verify(data []byte, sig *Signature) error +} + +// CryptoPublicKey, if implemented by a PublicKey, +// returns the underlying crypto.PublicKey form of the key. +type CryptoPublicKey interface { + CryptoPublicKey() crypto.PublicKey +} + +// A Signer can create signatures that verify against a public key. +type Signer interface { + // PublicKey returns an associated PublicKey instance. + PublicKey() PublicKey + + // Sign returns raw signature for the given data. This method + // will apply the hash specified for the keytype to the data. + Sign(rand io.Reader, data []byte) (*Signature, error) +} + +// A AlgorithmSigner is a Signer that also supports specifying a specific +// algorithm to use for signing. +type AlgorithmSigner interface { + Signer + + // SignWithAlgorithm is like Signer.Sign, but allows specification of a + // non-default signing algorithm. See the SigAlgo* constants in this + // package for signature algorithms supported by this package. Callers may + // pass an empty string for the algorithm in which case the AlgorithmSigner + // will use its default algorithm. + SignWithAlgorithm(rand io.Reader, data []byte, algorithm string) (*Signature, error) +} + +type rsaPublicKey rsa.PublicKey + +func (r *rsaPublicKey) Type() string { + return "ssh-rsa" +} + +// parseRSA parses an RSA key according to RFC 4253, section 6.6. +func parseRSA(in []byte) (out PublicKey, rest []byte, err error) { + var w struct { + E *big.Int + N *big.Int + Rest []byte `ssh:"rest"` + } + if err := Unmarshal(in, &w); err != nil { + return nil, nil, err + } + + if w.E.BitLen() > 24 { + return nil, nil, errors.New("ssh: exponent too large") + } + e := w.E.Int64() + if e < 3 || e&1 == 0 { + return nil, nil, errors.New("ssh: incorrect exponent") + } + + var key rsa.PublicKey + key.E = int(e) + key.N = w.N + return (*rsaPublicKey)(&key), w.Rest, nil +} + +func (r *rsaPublicKey) Marshal() []byte { + e := new(big.Int).SetInt64(int64(r.E)) + // RSA publickey struct layout should match the struct used by + // parseRSACert in the x/crypto/ssh/agent package. + wirekey := struct { + Name string + E *big.Int + N *big.Int + }{ + KeyAlgoRSA, + e, + r.N, + } + return Marshal(&wirekey) +} + +func (r *rsaPublicKey) Verify(data []byte, sig *Signature) error { + var hash crypto.Hash + switch sig.Format { + case SigAlgoRSA: + hash = crypto.SHA1 + case SigAlgoRSASHA2256: + hash = crypto.SHA256 + case SigAlgoRSASHA2512: + hash = crypto.SHA512 + default: + return fmt.Errorf("ssh: signature type %s for key type %s", sig.Format, r.Type()) + } + h := hash.New() + h.Write(data) + digest := h.Sum(nil) + return rsa.VerifyPKCS1v15((*rsa.PublicKey)(r), hash, digest, sig.Blob) +} + +func (r *rsaPublicKey) CryptoPublicKey() crypto.PublicKey { + return (*rsa.PublicKey)(r) +} + +type dsaPublicKey dsa.PublicKey + +func (k *dsaPublicKey) Type() string { + return "ssh-dss" +} + +func checkDSAParams(param *dsa.Parameters) error { + // SSH specifies FIPS 186-2, which only provided a single size + // (1024 bits) DSA key. FIPS 186-3 allows for larger key + // sizes, which would confuse SSH. + if l := param.P.BitLen(); l != 1024 { + return fmt.Errorf("ssh: unsupported DSA key size %d", l) + } + + return nil +} + +// parseDSA parses an DSA key according to RFC 4253, section 6.6. +func parseDSA(in []byte) (out PublicKey, rest []byte, err error) { + var w struct { + P, Q, G, Y *big.Int + Rest []byte `ssh:"rest"` + } + if err := Unmarshal(in, &w); err != nil { + return nil, nil, err + } + + param := dsa.Parameters{ + P: w.P, + Q: w.Q, + G: w.G, + } + if err := checkDSAParams(¶m); err != nil { + return nil, nil, err + } + + key := &dsaPublicKey{ + Parameters: param, + Y: w.Y, + } + return key, w.Rest, nil +} + +func (k *dsaPublicKey) Marshal() []byte { + // DSA publickey struct layout should match the struct used by + // parseDSACert in the x/crypto/ssh/agent package. + w := struct { + Name string + P, Q, G, Y *big.Int + }{ + k.Type(), + k.P, + k.Q, + k.G, + k.Y, + } + + return Marshal(&w) +} + +func (k *dsaPublicKey) Verify(data []byte, sig *Signature) error { + if sig.Format != k.Type() { + return fmt.Errorf("ssh: signature type %s for key type %s", sig.Format, k.Type()) + } + h := crypto.SHA1.New() + h.Write(data) + digest := h.Sum(nil) + + // Per RFC 4253, section 6.6, + // The value for 'dss_signature_blob' is encoded as a string containing + // r, followed by s (which are 160-bit integers, without lengths or + // padding, unsigned, and in network byte order). + // For DSS purposes, sig.Blob should be exactly 40 bytes in length. + if len(sig.Blob) != 40 { + return errors.New("ssh: DSA signature parse error") + } + r := new(big.Int).SetBytes(sig.Blob[:20]) + s := new(big.Int).SetBytes(sig.Blob[20:]) + if dsa.Verify((*dsa.PublicKey)(k), digest, r, s) { + return nil + } + return errors.New("ssh: signature did not verify") +} + +func (k *dsaPublicKey) CryptoPublicKey() crypto.PublicKey { + return (*dsa.PublicKey)(k) +} + +type dsaPrivateKey struct { + *dsa.PrivateKey +} + +func (k *dsaPrivateKey) PublicKey() PublicKey { + return (*dsaPublicKey)(&k.PrivateKey.PublicKey) +} + +func (k *dsaPrivateKey) Sign(rand io.Reader, data []byte) (*Signature, error) { + return k.SignWithAlgorithm(rand, data, "") +} + +func (k *dsaPrivateKey) SignWithAlgorithm(rand io.Reader, data []byte, algorithm string) (*Signature, error) { + if algorithm != "" && algorithm != k.PublicKey().Type() { + return nil, fmt.Errorf("ssh: unsupported signature algorithm %s", algorithm) + } + + h := crypto.SHA1.New() + h.Write(data) + digest := h.Sum(nil) + r, s, err := dsa.Sign(rand, k.PrivateKey, digest) + if err != nil { + return nil, err + } + + sig := make([]byte, 40) + rb := r.Bytes() + sb := s.Bytes() + + copy(sig[20-len(rb):20], rb) + copy(sig[40-len(sb):], sb) + + return &Signature{ + Format: k.PublicKey().Type(), + Blob: sig, + }, nil +} + +type ecdsaPublicKey ecdsa.PublicKey + +func (k *ecdsaPublicKey) Type() string { + return "ecdsa-sha2-" + k.nistID() +} + +func (k *ecdsaPublicKey) nistID() string { + switch k.Params().BitSize { + case 256: + return "nistp256" + case 384: + return "nistp384" + case 521: + return "nistp521" + } + panic("ssh: unsupported ecdsa key size") +} + +type ed25519PublicKey ed25519.PublicKey + +func (k ed25519PublicKey) Type() string { + return KeyAlgoED25519 +} + +func parseED25519(in []byte) (out PublicKey, rest []byte, err error) { + var w struct { + KeyBytes []byte + Rest []byte `ssh:"rest"` + } + + if err := Unmarshal(in, &w); err != nil { + return nil, nil, err + } + + key := ed25519.PublicKey(w.KeyBytes) + + return (ed25519PublicKey)(key), w.Rest, nil +} + +func (k ed25519PublicKey) Marshal() []byte { + w := struct { + Name string + KeyBytes []byte + }{ + KeyAlgoED25519, + []byte(k), + } + return Marshal(&w) +} + +func (k ed25519PublicKey) Verify(b []byte, sig *Signature) error { + if sig.Format != k.Type() { + return fmt.Errorf("ssh: signature type %s for key type %s", sig.Format, k.Type()) + } + + edKey := (ed25519.PublicKey)(k) + if ok := ed25519.Verify(edKey, b, sig.Blob); !ok { + return errors.New("ssh: signature did not verify") + } + + return nil +} + +func (k ed25519PublicKey) CryptoPublicKey() crypto.PublicKey { + return ed25519.PublicKey(k) +} + +func supportedEllipticCurve(curve elliptic.Curve) bool { + return curve == elliptic.P256() || curve == elliptic.P384() || curve == elliptic.P521() +} + +// ecHash returns the hash to match the given elliptic curve, see RFC +// 5656, section 6.2.1 +func ecHash(curve elliptic.Curve) crypto.Hash { + bitSize := curve.Params().BitSize + switch { + case bitSize <= 256: + return crypto.SHA256 + case bitSize <= 384: + return crypto.SHA384 + } + return crypto.SHA512 +} + +// parseECDSA parses an ECDSA key according to RFC 5656, section 3.1. +func parseECDSA(in []byte) (out PublicKey, rest []byte, err error) { + var w struct { + Curve string + KeyBytes []byte + Rest []byte `ssh:"rest"` + } + + if err := Unmarshal(in, &w); err != nil { + return nil, nil, err + } + + key := new(ecdsa.PublicKey) + + switch w.Curve { + case "nistp256": + key.Curve = elliptic.P256() + case "nistp384": + key.Curve = elliptic.P384() + case "nistp521": + key.Curve = elliptic.P521() + default: + return nil, nil, errors.New("ssh: unsupported curve") + } + + key.X, key.Y = elliptic.Unmarshal(key.Curve, w.KeyBytes) + if key.X == nil || key.Y == nil { + return nil, nil, errors.New("ssh: invalid curve point") + } + return (*ecdsaPublicKey)(key), w.Rest, nil +} + +func (k *ecdsaPublicKey) Marshal() []byte { + // See RFC 5656, section 3.1. + keyBytes := elliptic.Marshal(k.Curve, k.X, k.Y) + // ECDSA publickey struct layout should match the struct used by + // parseECDSACert in the x/crypto/ssh/agent package. + w := struct { + Name string + ID string + Key []byte + }{ + k.Type(), + k.nistID(), + keyBytes, + } + + return Marshal(&w) +} + +func (k *ecdsaPublicKey) Verify(data []byte, sig *Signature) error { + if sig.Format != k.Type() { + return fmt.Errorf("ssh: signature type %s for key type %s", sig.Format, k.Type()) + } + + h := ecHash(k.Curve).New() + h.Write(data) + digest := h.Sum(nil) + + // Per RFC 5656, section 3.1.2, + // The ecdsa_signature_blob value has the following specific encoding: + // mpint r + // mpint s + var ecSig struct { + R *big.Int + S *big.Int + } + + if err := Unmarshal(sig.Blob, &ecSig); err != nil { + return err + } + + if ecdsa.Verify((*ecdsa.PublicKey)(k), digest, ecSig.R, ecSig.S) { + return nil + } + return errors.New("ssh: signature did not verify") +} + +func (k *ecdsaPublicKey) CryptoPublicKey() crypto.PublicKey { + return (*ecdsa.PublicKey)(k) +} + +// NewSignerFromKey takes an *rsa.PrivateKey, *dsa.PrivateKey, +// *ecdsa.PrivateKey or any other crypto.Signer and returns a +// corresponding Signer instance. ECDSA keys must use P-256, P-384 or +// P-521. DSA keys must use parameter size L1024N160. +func NewSignerFromKey(key interface{}) (Signer, error) { + switch key := key.(type) { + case crypto.Signer: + return NewSignerFromSigner(key) + case *dsa.PrivateKey: + return newDSAPrivateKey(key) + default: + return nil, fmt.Errorf("ssh: unsupported key type %T", key) + } +} + +func newDSAPrivateKey(key *dsa.PrivateKey) (Signer, error) { + if err := checkDSAParams(&key.PublicKey.Parameters); err != nil { + return nil, err + } + + return &dsaPrivateKey{key}, nil +} + +type wrappedSigner struct { + signer crypto.Signer + pubKey PublicKey +} + +// NewSignerFromSigner takes any crypto.Signer implementation and +// returns a corresponding Signer interface. This can be used, for +// example, with keys kept in hardware modules. +func NewSignerFromSigner(signer crypto.Signer) (Signer, error) { + pubKey, err := NewPublicKey(signer.Public()) + if err != nil { + return nil, err + } + + return &wrappedSigner{signer, pubKey}, nil +} + +func (s *wrappedSigner) PublicKey() PublicKey { + return s.pubKey +} + +func (s *wrappedSigner) Sign(rand io.Reader, data []byte) (*Signature, error) { + return s.SignWithAlgorithm(rand, data, "") +} + +func (s *wrappedSigner) SignWithAlgorithm(rand io.Reader, data []byte, algorithm string) (*Signature, error) { + var hashFunc crypto.Hash + + if _, ok := s.pubKey.(*rsaPublicKey); ok { + // RSA keys support a few hash functions determined by the requested signature algorithm + switch algorithm { + case "", SigAlgoRSA: + algorithm = SigAlgoRSA + hashFunc = crypto.SHA1 + case SigAlgoRSASHA2256: + hashFunc = crypto.SHA256 + case SigAlgoRSASHA2512: + hashFunc = crypto.SHA512 + default: + return nil, fmt.Errorf("ssh: unsupported signature algorithm %s", algorithm) + } + } else { + // The only supported algorithm for all other key types is the same as the type of the key + if algorithm == "" { + algorithm = s.pubKey.Type() + } else if algorithm != s.pubKey.Type() { + return nil, fmt.Errorf("ssh: unsupported signature algorithm %s", algorithm) + } + + switch key := s.pubKey.(type) { + case *dsaPublicKey: + hashFunc = crypto.SHA1 + case *ecdsaPublicKey: + hashFunc = ecHash(key.Curve) + case ed25519PublicKey: + default: + return nil, fmt.Errorf("ssh: unsupported key type %T", key) + } + } + + var digest []byte + if hashFunc != 0 { + h := hashFunc.New() + h.Write(data) + digest = h.Sum(nil) + } else { + digest = data + } + + signature, err := s.signer.Sign(rand, digest, hashFunc) + if err != nil { + return nil, err + } + + // crypto.Signer.Sign is expected to return an ASN.1-encoded signature + // for ECDSA and DSA, but that's not the encoding expected by SSH, so + // re-encode. + switch s.pubKey.(type) { + case *ecdsaPublicKey, *dsaPublicKey: + type asn1Signature struct { + R, S *big.Int + } + asn1Sig := new(asn1Signature) + _, err := asn1.Unmarshal(signature, asn1Sig) + if err != nil { + return nil, err + } + + switch s.pubKey.(type) { + case *ecdsaPublicKey: + signature = Marshal(asn1Sig) + + case *dsaPublicKey: + signature = make([]byte, 40) + r := asn1Sig.R.Bytes() + s := asn1Sig.S.Bytes() + copy(signature[20-len(r):20], r) + copy(signature[40-len(s):40], s) + } + } + + return &Signature{ + Format: algorithm, + Blob: signature, + }, nil +} + +// NewPublicKey takes an *rsa.PublicKey, *dsa.PublicKey, *ecdsa.PublicKey, +// or ed25519.PublicKey returns a corresponding PublicKey instance. +// ECDSA keys must use P-256, P-384 or P-521. +func NewPublicKey(key interface{}) (PublicKey, error) { + switch key := key.(type) { + case *rsa.PublicKey: + return (*rsaPublicKey)(key), nil + case *ecdsa.PublicKey: + if !supportedEllipticCurve(key.Curve) { + return nil, errors.New("ssh: only P-256, P-384 and P-521 EC keys are supported") + } + return (*ecdsaPublicKey)(key), nil + case *dsa.PublicKey: + return (*dsaPublicKey)(key), nil + case ed25519.PublicKey: + return (ed25519PublicKey)(key), nil + default: + return nil, fmt.Errorf("ssh: unsupported key type %T", key) + } +} + +// ParsePrivateKey returns a Signer from a PEM encoded private key. It supports +// the same keys as ParseRawPrivateKey. +func ParsePrivateKey(pemBytes []byte) (Signer, error) { + key, err := ParseRawPrivateKey(pemBytes) + if err != nil { + return nil, err + } + + return NewSignerFromKey(key) +} + +// ParsePrivateKeyWithPassphrase returns a Signer from a PEM encoded private +// key and passphrase. It supports the same keys as +// ParseRawPrivateKeyWithPassphrase. +func ParsePrivateKeyWithPassphrase(pemBytes, passPhrase []byte) (Signer, error) { + key, err := ParseRawPrivateKeyWithPassphrase(pemBytes, passPhrase) + if err != nil { + return nil, err + } + + return NewSignerFromKey(key) +} + +// encryptedBlock tells whether a private key is +// encrypted by examining its Proc-Type header +// for a mention of ENCRYPTED +// according to RFC 1421 Section 4.6.1.1. +func encryptedBlock(block *pem.Block) bool { + return strings.Contains(block.Headers["Proc-Type"], "ENCRYPTED") +} + +// ParseRawPrivateKey returns a private key from a PEM encoded private key. It +// supports RSA (PKCS#1), PKCS#8, DSA (OpenSSL), and ECDSA private keys. +func ParseRawPrivateKey(pemBytes []byte) (interface{}, error) { + block, _ := pem.Decode(pemBytes) + if block == nil { + return nil, errors.New("ssh: no key found") + } + + if encryptedBlock(block) { + return nil, errors.New("ssh: cannot decode encrypted private keys") + } + + switch block.Type { + case "RSA PRIVATE KEY": + return x509.ParsePKCS1PrivateKey(block.Bytes) + // RFC5208 - https://tools.ietf.org/html/rfc5208 + case "PRIVATE KEY": + return x509.ParsePKCS8PrivateKey(block.Bytes) + case "EC PRIVATE KEY": + return x509.ParseECPrivateKey(block.Bytes) + case "DSA PRIVATE KEY": + return ParseDSAPrivateKey(block.Bytes) + case "OPENSSH PRIVATE KEY": + return parseOpenSSHPrivateKey(block.Bytes) + default: + return nil, fmt.Errorf("ssh: unsupported key type %q", block.Type) + } +} + +// ParseRawPrivateKeyWithPassphrase returns a private key decrypted with +// passphrase from a PEM encoded private key. If wrong passphrase, return +// x509.IncorrectPasswordError. +func ParseRawPrivateKeyWithPassphrase(pemBytes, passPhrase []byte) (interface{}, error) { + block, _ := pem.Decode(pemBytes) + if block == nil { + return nil, errors.New("ssh: no key found") + } + buf := block.Bytes + + if encryptedBlock(block) { + if x509.IsEncryptedPEMBlock(block) { + var err error + buf, err = x509.DecryptPEMBlock(block, passPhrase) + if err != nil { + if err == x509.IncorrectPasswordError { + return nil, err + } + return nil, fmt.Errorf("ssh: cannot decode encrypted private keys: %v", err) + } + } + } + + switch block.Type { + case "RSA PRIVATE KEY": + return x509.ParsePKCS1PrivateKey(buf) + case "EC PRIVATE KEY": + return x509.ParseECPrivateKey(buf) + case "DSA PRIVATE KEY": + return ParseDSAPrivateKey(buf) + case "OPENSSH PRIVATE KEY": + return parseOpenSSHPrivateKey(buf) + default: + return nil, fmt.Errorf("ssh: unsupported key type %q", block.Type) + } +} + +// ParseDSAPrivateKey returns a DSA private key from its ASN.1 DER encoding, as +// specified by the OpenSSL DSA man page. +func ParseDSAPrivateKey(der []byte) (*dsa.PrivateKey, error) { + var k struct { + Version int + P *big.Int + Q *big.Int + G *big.Int + Pub *big.Int + Priv *big.Int + } + rest, err := asn1.Unmarshal(der, &k) + if err != nil { + return nil, errors.New("ssh: failed to parse DSA key: " + err.Error()) + } + if len(rest) > 0 { + return nil, errors.New("ssh: garbage after DSA key") + } + + return &dsa.PrivateKey{ + PublicKey: dsa.PublicKey{ + Parameters: dsa.Parameters{ + P: k.P, + Q: k.Q, + G: k.G, + }, + Y: k.Pub, + }, + X: k.Priv, + }, nil +} + +// Implemented based on the documentation at +// https://github.com/openssh/openssh-portable/blob/master/PROTOCOL.key +func parseOpenSSHPrivateKey(key []byte) (crypto.PrivateKey, error) { + const magic = "openssh-key-v1\x00" + if len(key) < len(magic) || string(key[:len(magic)]) != magic { + return nil, errors.New("ssh: invalid openssh private key format") + } + remaining := key[len(magic):] + + var w struct { + CipherName string + KdfName string + KdfOpts string + NumKeys uint32 + PubKey []byte + PrivKeyBlock []byte + } + + if err := Unmarshal(remaining, &w); err != nil { + return nil, err + } + + if w.KdfName != "none" || w.CipherName != "none" { + return nil, errors.New("ssh: cannot decode encrypted private keys") + } + + pk1 := struct { + Check1 uint32 + Check2 uint32 + Keytype string + Rest []byte `ssh:"rest"` + }{} + + if err := Unmarshal(w.PrivKeyBlock, &pk1); err != nil { + return nil, err + } + + if pk1.Check1 != pk1.Check2 { + return nil, errors.New("ssh: checkint mismatch") + } + + // we only handle ed25519 and rsa keys currently + switch pk1.Keytype { + case KeyAlgoRSA: + // https://github.com/openssh/openssh-portable/blob/master/sshkey.c#L2760-L2773 + key := struct { + N *big.Int + E *big.Int + D *big.Int + Iqmp *big.Int + P *big.Int + Q *big.Int + Comment string + Pad []byte `ssh:"rest"` + }{} + + if err := Unmarshal(pk1.Rest, &key); err != nil { + return nil, err + } + + for i, b := range key.Pad { + if int(b) != i+1 { + return nil, errors.New("ssh: padding not as expected") + } + } + + pk := &rsa.PrivateKey{ + PublicKey: rsa.PublicKey{ + N: key.N, + E: int(key.E.Int64()), + }, + D: key.D, + Primes: []*big.Int{key.P, key.Q}, + } + + if err := pk.Validate(); err != nil { + return nil, err + } + + pk.Precompute() + + return pk, nil + case KeyAlgoED25519: + key := struct { + Pub []byte + Priv []byte + Comment string + Pad []byte `ssh:"rest"` + }{} + + if err := Unmarshal(pk1.Rest, &key); err != nil { + return nil, err + } + + if len(key.Priv) != ed25519.PrivateKeySize { + return nil, errors.New("ssh: private key unexpected length") + } + + for i, b := range key.Pad { + if int(b) != i+1 { + return nil, errors.New("ssh: padding not as expected") + } + } + + pk := ed25519.PrivateKey(make([]byte, ed25519.PrivateKeySize)) + copy(pk, key.Priv) + return &pk, nil + default: + return nil, errors.New("ssh: unhandled key type") + } +} + +// FingerprintLegacyMD5 returns the user presentation of the key's +// fingerprint as described by RFC 4716 section 4. +func FingerprintLegacyMD5(pubKey PublicKey) string { + md5sum := md5.Sum(pubKey.Marshal()) + hexarray := make([]string, len(md5sum)) + for i, c := range md5sum { + hexarray[i] = hex.EncodeToString([]byte{c}) + } + return strings.Join(hexarray, ":") +} + +// FingerprintSHA256 returns the user presentation of the key's +// fingerprint as unpadded base64 encoded sha256 hash. +// This format was introduced from OpenSSH 6.8. +// https://www.openssh.com/txt/release-6.8 +// https://tools.ietf.org/html/rfc4648#section-3.2 (unpadded base64 encoding) +func FingerprintSHA256(pubKey PublicKey) string { + sha256sum := sha256.Sum256(pubKey.Marshal()) + hash := base64.RawStdEncoding.EncodeToString(sha256sum[:]) + return "SHA256:" + hash +} diff --git a/vendor/golang.org/x/crypto/ssh/mac.go b/vendor/golang.org/x/crypto/ssh/mac.go new file mode 100644 index 0000000..c07a062 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/mac.go @@ -0,0 +1,61 @@ +// Copyright 2012 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +// Message authentication support + +import ( + "crypto/hmac" + "crypto/sha1" + "crypto/sha256" + "hash" +) + +type macMode struct { + keySize int + etm bool + new func(key []byte) hash.Hash +} + +// truncatingMAC wraps around a hash.Hash and truncates the output digest to +// a given size. +type truncatingMAC struct { + length int + hmac hash.Hash +} + +func (t truncatingMAC) Write(data []byte) (int, error) { + return t.hmac.Write(data) +} + +func (t truncatingMAC) Sum(in []byte) []byte { + out := t.hmac.Sum(in) + return out[:len(in)+t.length] +} + +func (t truncatingMAC) Reset() { + t.hmac.Reset() +} + +func (t truncatingMAC) Size() int { + return t.length +} + +func (t truncatingMAC) BlockSize() int { return t.hmac.BlockSize() } + +var macModes = map[string]*macMode{ + "hmac-sha2-256-etm@openssh.com": {32, true, func(key []byte) hash.Hash { + return hmac.New(sha256.New, key) + }}, + "hmac-sha2-256": {32, false, func(key []byte) hash.Hash { + return hmac.New(sha256.New, key) + }}, + "hmac-sha1": {20, false, func(key []byte) hash.Hash { + return hmac.New(sha1.New, key) + }}, + "hmac-sha1-96": {20, false, func(key []byte) hash.Hash { + return truncatingMAC{12, hmac.New(sha1.New, key)} + }}, +} diff --git a/vendor/golang.org/x/crypto/ssh/messages.go b/vendor/golang.org/x/crypto/ssh/messages.go new file mode 100644 index 0000000..ac41a41 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/messages.go @@ -0,0 +1,866 @@ +// Copyright 2011 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "bytes" + "encoding/binary" + "errors" + "fmt" + "io" + "math/big" + "reflect" + "strconv" + "strings" +) + +// These are SSH message type numbers. They are scattered around several +// documents but many were taken from [SSH-PARAMETERS]. +const ( + msgIgnore = 2 + msgUnimplemented = 3 + msgDebug = 4 + msgNewKeys = 21 +) + +// SSH messages: +// +// These structures mirror the wire format of the corresponding SSH messages. +// They are marshaled using reflection with the marshal and unmarshal functions +// in this file. The only wrinkle is that a final member of type []byte with a +// ssh tag of "rest" receives the remainder of a packet when unmarshaling. + +// See RFC 4253, section 11.1. +const msgDisconnect = 1 + +// disconnectMsg is the message that signals a disconnect. It is also +// the error type returned from mux.Wait() +type disconnectMsg struct { + Reason uint32 `sshtype:"1"` + Message string + Language string +} + +func (d *disconnectMsg) Error() string { + return fmt.Sprintf("ssh: disconnect, reason %d: %s", d.Reason, d.Message) +} + +// See RFC 4253, section 7.1. +const msgKexInit = 20 + +type kexInitMsg struct { + Cookie [16]byte `sshtype:"20"` + KexAlgos []string + ServerHostKeyAlgos []string + CiphersClientServer []string + CiphersServerClient []string + MACsClientServer []string + MACsServerClient []string + CompressionClientServer []string + CompressionServerClient []string + LanguagesClientServer []string + LanguagesServerClient []string + FirstKexFollows bool + Reserved uint32 +} + +// See RFC 4253, section 8. + +// Diffie-Helman +const msgKexDHInit = 30 + +type kexDHInitMsg struct { + X *big.Int `sshtype:"30"` +} + +const msgKexECDHInit = 30 + +type kexECDHInitMsg struct { + ClientPubKey []byte `sshtype:"30"` +} + +const msgKexECDHReply = 31 + +type kexECDHReplyMsg struct { + HostKey []byte `sshtype:"31"` + EphemeralPubKey []byte + Signature []byte +} + +const msgKexDHReply = 31 + +type kexDHReplyMsg struct { + HostKey []byte `sshtype:"31"` + Y *big.Int + Signature []byte +} + +// See RFC 4419, section 5. +const msgKexDHGexGroup = 31 + +type kexDHGexGroupMsg struct { + P *big.Int `sshtype:"31"` + G *big.Int +} + +const msgKexDHGexInit = 32 + +type kexDHGexInitMsg struct { + X *big.Int `sshtype:"32"` +} + +const msgKexDHGexReply = 33 + +type kexDHGexReplyMsg struct { + HostKey []byte `sshtype:"33"` + Y *big.Int + Signature []byte +} + +const msgKexDHGexRequest = 34 + +type kexDHGexRequestMsg struct { + MinBits uint32 `sshtype:"34"` + PreferedBits uint32 + MaxBits uint32 +} + +// See RFC 4253, section 10. +const msgServiceRequest = 5 + +type serviceRequestMsg struct { + Service string `sshtype:"5"` +} + +// See RFC 4253, section 10. +const msgServiceAccept = 6 + +type serviceAcceptMsg struct { + Service string `sshtype:"6"` +} + +// See RFC 4252, section 5. +const msgUserAuthRequest = 50 + +type userAuthRequestMsg struct { + User string `sshtype:"50"` + Service string + Method string + Payload []byte `ssh:"rest"` +} + +// Used for debug printouts of packets. +type userAuthSuccessMsg struct { +} + +// See RFC 4252, section 5.1 +const msgUserAuthFailure = 51 + +type userAuthFailureMsg struct { + Methods []string `sshtype:"51"` + PartialSuccess bool +} + +// See RFC 4252, section 5.1 +const msgUserAuthSuccess = 52 + +// See RFC 4252, section 5.4 +const msgUserAuthBanner = 53 + +type userAuthBannerMsg struct { + Message string `sshtype:"53"` + // unused, but required to allow message parsing + Language string +} + +// See RFC 4256, section 3.2 +const msgUserAuthInfoRequest = 60 +const msgUserAuthInfoResponse = 61 + +type userAuthInfoRequestMsg struct { + User string `sshtype:"60"` + Instruction string + DeprecatedLanguage string + NumPrompts uint32 + Prompts []byte `ssh:"rest"` +} + +// See RFC 4254, section 5.1. +const msgChannelOpen = 90 + +type channelOpenMsg struct { + ChanType string `sshtype:"90"` + PeersID uint32 + PeersWindow uint32 + MaxPacketSize uint32 + TypeSpecificData []byte `ssh:"rest"` +} + +const msgChannelExtendedData = 95 +const msgChannelData = 94 + +// Used for debug print outs of packets. +type channelDataMsg struct { + PeersID uint32 `sshtype:"94"` + Length uint32 + Rest []byte `ssh:"rest"` +} + +// See RFC 4254, section 5.1. +const msgChannelOpenConfirm = 91 + +type channelOpenConfirmMsg struct { + PeersID uint32 `sshtype:"91"` + MyID uint32 + MyWindow uint32 + MaxPacketSize uint32 + TypeSpecificData []byte `ssh:"rest"` +} + +// See RFC 4254, section 5.1. +const msgChannelOpenFailure = 92 + +type channelOpenFailureMsg struct { + PeersID uint32 `sshtype:"92"` + Reason RejectionReason + Message string + Language string +} + +const msgChannelRequest = 98 + +type channelRequestMsg struct { + PeersID uint32 `sshtype:"98"` + Request string + WantReply bool + RequestSpecificData []byte `ssh:"rest"` +} + +// See RFC 4254, section 5.4. +const msgChannelSuccess = 99 + +type channelRequestSuccessMsg struct { + PeersID uint32 `sshtype:"99"` +} + +// See RFC 4254, section 5.4. +const msgChannelFailure = 100 + +type channelRequestFailureMsg struct { + PeersID uint32 `sshtype:"100"` +} + +// See RFC 4254, section 5.3 +const msgChannelClose = 97 + +type channelCloseMsg struct { + PeersID uint32 `sshtype:"97"` +} + +// See RFC 4254, section 5.3 +const msgChannelEOF = 96 + +type channelEOFMsg struct { + PeersID uint32 `sshtype:"96"` +} + +// See RFC 4254, section 4 +const msgGlobalRequest = 80 + +type globalRequestMsg struct { + Type string `sshtype:"80"` + WantReply bool + Data []byte `ssh:"rest"` +} + +// See RFC 4254, section 4 +const msgRequestSuccess = 81 + +type globalRequestSuccessMsg struct { + Data []byte `ssh:"rest" sshtype:"81"` +} + +// See RFC 4254, section 4 +const msgRequestFailure = 82 + +type globalRequestFailureMsg struct { + Data []byte `ssh:"rest" sshtype:"82"` +} + +// See RFC 4254, section 5.2 +const msgChannelWindowAdjust = 93 + +type windowAdjustMsg struct { + PeersID uint32 `sshtype:"93"` + AdditionalBytes uint32 +} + +// See RFC 4252, section 7 +const msgUserAuthPubKeyOk = 60 + +type userAuthPubKeyOkMsg struct { + Algo string `sshtype:"60"` + PubKey []byte +} + +// See RFC 4462, section 3 +const msgUserAuthGSSAPIResponse = 60 + +type userAuthGSSAPIResponse struct { + SupportMech []byte `sshtype:"60"` +} + +const msgUserAuthGSSAPIToken = 61 + +type userAuthGSSAPIToken struct { + Token []byte `sshtype:"61"` +} + +const msgUserAuthGSSAPIMIC = 66 + +type userAuthGSSAPIMIC struct { + MIC []byte `sshtype:"66"` +} + +// See RFC 4462, section 3.9 +const msgUserAuthGSSAPIErrTok = 64 + +type userAuthGSSAPIErrTok struct { + ErrorToken []byte `sshtype:"64"` +} + +// See RFC 4462, section 3.8 +const msgUserAuthGSSAPIError = 65 + +type userAuthGSSAPIError struct { + MajorStatus uint32 `sshtype:"65"` + MinorStatus uint32 + Message string + LanguageTag string +} + +// typeTags returns the possible type bytes for the given reflect.Type, which +// should be a struct. The possible values are separated by a '|' character. +func typeTags(structType reflect.Type) (tags []byte) { + tagStr := structType.Field(0).Tag.Get("sshtype") + + for _, tag := range strings.Split(tagStr, "|") { + i, err := strconv.Atoi(tag) + if err == nil { + tags = append(tags, byte(i)) + } + } + + return tags +} + +func fieldError(t reflect.Type, field int, problem string) error { + if problem != "" { + problem = ": " + problem + } + return fmt.Errorf("ssh: unmarshal error for field %s of type %s%s", t.Field(field).Name, t.Name(), problem) +} + +var errShortRead = errors.New("ssh: short read") + +// Unmarshal parses data in SSH wire format into a structure. The out +// argument should be a pointer to struct. If the first member of the +// struct has the "sshtype" tag set to a '|'-separated set of numbers +// in decimal, the packet must start with one of those numbers. In +// case of error, Unmarshal returns a ParseError or +// UnexpectedMessageError. +func Unmarshal(data []byte, out interface{}) error { + v := reflect.ValueOf(out).Elem() + structType := v.Type() + expectedTypes := typeTags(structType) + + var expectedType byte + if len(expectedTypes) > 0 { + expectedType = expectedTypes[0] + } + + if len(data) == 0 { + return parseError(expectedType) + } + + if len(expectedTypes) > 0 { + goodType := false + for _, e := range expectedTypes { + if e > 0 && data[0] == e { + goodType = true + break + } + } + if !goodType { + return fmt.Errorf("ssh: unexpected message type %d (expected one of %v)", data[0], expectedTypes) + } + data = data[1:] + } + + var ok bool + for i := 0; i < v.NumField(); i++ { + field := v.Field(i) + t := field.Type() + switch t.Kind() { + case reflect.Bool: + if len(data) < 1 { + return errShortRead + } + field.SetBool(data[0] != 0) + data = data[1:] + case reflect.Array: + if t.Elem().Kind() != reflect.Uint8 { + return fieldError(structType, i, "array of unsupported type") + } + if len(data) < t.Len() { + return errShortRead + } + for j, n := 0, t.Len(); j < n; j++ { + field.Index(j).Set(reflect.ValueOf(data[j])) + } + data = data[t.Len():] + case reflect.Uint64: + var u64 uint64 + if u64, data, ok = parseUint64(data); !ok { + return errShortRead + } + field.SetUint(u64) + case reflect.Uint32: + var u32 uint32 + if u32, data, ok = parseUint32(data); !ok { + return errShortRead + } + field.SetUint(uint64(u32)) + case reflect.Uint8: + if len(data) < 1 { + return errShortRead + } + field.SetUint(uint64(data[0])) + data = data[1:] + case reflect.String: + var s []byte + if s, data, ok = parseString(data); !ok { + return fieldError(structType, i, "") + } + field.SetString(string(s)) + case reflect.Slice: + switch t.Elem().Kind() { + case reflect.Uint8: + if structType.Field(i).Tag.Get("ssh") == "rest" { + field.Set(reflect.ValueOf(data)) + data = nil + } else { + var s []byte + if s, data, ok = parseString(data); !ok { + return errShortRead + } + field.Set(reflect.ValueOf(s)) + } + case reflect.String: + var nl []string + if nl, data, ok = parseNameList(data); !ok { + return errShortRead + } + field.Set(reflect.ValueOf(nl)) + default: + return fieldError(structType, i, "slice of unsupported type") + } + case reflect.Ptr: + if t == bigIntType { + var n *big.Int + if n, data, ok = parseInt(data); !ok { + return errShortRead + } + field.Set(reflect.ValueOf(n)) + } else { + return fieldError(structType, i, "pointer to unsupported type") + } + default: + return fieldError(structType, i, fmt.Sprintf("unsupported type: %v", t)) + } + } + + if len(data) != 0 { + return parseError(expectedType) + } + + return nil +} + +// Marshal serializes the message in msg to SSH wire format. The msg +// argument should be a struct or pointer to struct. If the first +// member has the "sshtype" tag set to a number in decimal, that +// number is prepended to the result. If the last of member has the +// "ssh" tag set to "rest", its contents are appended to the output. +func Marshal(msg interface{}) []byte { + out := make([]byte, 0, 64) + return marshalStruct(out, msg) +} + +func marshalStruct(out []byte, msg interface{}) []byte { + v := reflect.Indirect(reflect.ValueOf(msg)) + msgTypes := typeTags(v.Type()) + if len(msgTypes) > 0 { + out = append(out, msgTypes[0]) + } + + for i, n := 0, v.NumField(); i < n; i++ { + field := v.Field(i) + switch t := field.Type(); t.Kind() { + case reflect.Bool: + var v uint8 + if field.Bool() { + v = 1 + } + out = append(out, v) + case reflect.Array: + if t.Elem().Kind() != reflect.Uint8 { + panic(fmt.Sprintf("array of non-uint8 in field %d: %T", i, field.Interface())) + } + for j, l := 0, t.Len(); j < l; j++ { + out = append(out, uint8(field.Index(j).Uint())) + } + case reflect.Uint32: + out = appendU32(out, uint32(field.Uint())) + case reflect.Uint64: + out = appendU64(out, uint64(field.Uint())) + case reflect.Uint8: + out = append(out, uint8(field.Uint())) + case reflect.String: + s := field.String() + out = appendInt(out, len(s)) + out = append(out, s...) + case reflect.Slice: + switch t.Elem().Kind() { + case reflect.Uint8: + if v.Type().Field(i).Tag.Get("ssh") != "rest" { + out = appendInt(out, field.Len()) + } + out = append(out, field.Bytes()...) + case reflect.String: + offset := len(out) + out = appendU32(out, 0) + if n := field.Len(); n > 0 { + for j := 0; j < n; j++ { + f := field.Index(j) + if j != 0 { + out = append(out, ',') + } + out = append(out, f.String()...) + } + // overwrite length value + binary.BigEndian.PutUint32(out[offset:], uint32(len(out)-offset-4)) + } + default: + panic(fmt.Sprintf("slice of unknown type in field %d: %T", i, field.Interface())) + } + case reflect.Ptr: + if t == bigIntType { + var n *big.Int + nValue := reflect.ValueOf(&n) + nValue.Elem().Set(field) + needed := intLength(n) + oldLength := len(out) + + if cap(out)-len(out) < needed { + newOut := make([]byte, len(out), 2*(len(out)+needed)) + copy(newOut, out) + out = newOut + } + out = out[:oldLength+needed] + marshalInt(out[oldLength:], n) + } else { + panic(fmt.Sprintf("pointer to unknown type in field %d: %T", i, field.Interface())) + } + } + } + + return out +} + +var bigOne = big.NewInt(1) + +func parseString(in []byte) (out, rest []byte, ok bool) { + if len(in) < 4 { + return + } + length := binary.BigEndian.Uint32(in) + in = in[4:] + if uint32(len(in)) < length { + return + } + out = in[:length] + rest = in[length:] + ok = true + return +} + +var ( + comma = []byte{','} + emptyNameList = []string{} +) + +func parseNameList(in []byte) (out []string, rest []byte, ok bool) { + contents, rest, ok := parseString(in) + if !ok { + return + } + if len(contents) == 0 { + out = emptyNameList + return + } + parts := bytes.Split(contents, comma) + out = make([]string, len(parts)) + for i, part := range parts { + out[i] = string(part) + } + return +} + +func parseInt(in []byte) (out *big.Int, rest []byte, ok bool) { + contents, rest, ok := parseString(in) + if !ok { + return + } + out = new(big.Int) + + if len(contents) > 0 && contents[0]&0x80 == 0x80 { + // This is a negative number + notBytes := make([]byte, len(contents)) + for i := range notBytes { + notBytes[i] = ^contents[i] + } + out.SetBytes(notBytes) + out.Add(out, bigOne) + out.Neg(out) + } else { + // Positive number + out.SetBytes(contents) + } + ok = true + return +} + +func parseUint32(in []byte) (uint32, []byte, bool) { + if len(in) < 4 { + return 0, nil, false + } + return binary.BigEndian.Uint32(in), in[4:], true +} + +func parseUint64(in []byte) (uint64, []byte, bool) { + if len(in) < 8 { + return 0, nil, false + } + return binary.BigEndian.Uint64(in), in[8:], true +} + +func intLength(n *big.Int) int { + length := 4 /* length bytes */ + if n.Sign() < 0 { + nMinus1 := new(big.Int).Neg(n) + nMinus1.Sub(nMinus1, bigOne) + bitLen := nMinus1.BitLen() + if bitLen%8 == 0 { + // The number will need 0xff padding + length++ + } + length += (bitLen + 7) / 8 + } else if n.Sign() == 0 { + // A zero is the zero length string + } else { + bitLen := n.BitLen() + if bitLen%8 == 0 { + // The number will need 0x00 padding + length++ + } + length += (bitLen + 7) / 8 + } + + return length +} + +func marshalUint32(to []byte, n uint32) []byte { + binary.BigEndian.PutUint32(to, n) + return to[4:] +} + +func marshalUint64(to []byte, n uint64) []byte { + binary.BigEndian.PutUint64(to, n) + return to[8:] +} + +func marshalInt(to []byte, n *big.Int) []byte { + lengthBytes := to + to = to[4:] + length := 0 + + if n.Sign() < 0 { + // A negative number has to be converted to two's-complement + // form. So we'll subtract 1 and invert. If the + // most-significant-bit isn't set then we'll need to pad the + // beginning with 0xff in order to keep the number negative. + nMinus1 := new(big.Int).Neg(n) + nMinus1.Sub(nMinus1, bigOne) + bytes := nMinus1.Bytes() + for i := range bytes { + bytes[i] ^= 0xff + } + if len(bytes) == 0 || bytes[0]&0x80 == 0 { + to[0] = 0xff + to = to[1:] + length++ + } + nBytes := copy(to, bytes) + to = to[nBytes:] + length += nBytes + } else if n.Sign() == 0 { + // A zero is the zero length string + } else { + bytes := n.Bytes() + if len(bytes) > 0 && bytes[0]&0x80 != 0 { + // We'll have to pad this with a 0x00 in order to + // stop it looking like a negative number. + to[0] = 0 + to = to[1:] + length++ + } + nBytes := copy(to, bytes) + to = to[nBytes:] + length += nBytes + } + + lengthBytes[0] = byte(length >> 24) + lengthBytes[1] = byte(length >> 16) + lengthBytes[2] = byte(length >> 8) + lengthBytes[3] = byte(length) + return to +} + +func writeInt(w io.Writer, n *big.Int) { + length := intLength(n) + buf := make([]byte, length) + marshalInt(buf, n) + w.Write(buf) +} + +func writeString(w io.Writer, s []byte) { + var lengthBytes [4]byte + lengthBytes[0] = byte(len(s) >> 24) + lengthBytes[1] = byte(len(s) >> 16) + lengthBytes[2] = byte(len(s) >> 8) + lengthBytes[3] = byte(len(s)) + w.Write(lengthBytes[:]) + w.Write(s) +} + +func stringLength(n int) int { + return 4 + n +} + +func marshalString(to []byte, s []byte) []byte { + to[0] = byte(len(s) >> 24) + to[1] = byte(len(s) >> 16) + to[2] = byte(len(s) >> 8) + to[3] = byte(len(s)) + to = to[4:] + copy(to, s) + return to[len(s):] +} + +var bigIntType = reflect.TypeOf((*big.Int)(nil)) + +// Decode a packet into its corresponding message. +func decode(packet []byte) (interface{}, error) { + var msg interface{} + switch packet[0] { + case msgDisconnect: + msg = new(disconnectMsg) + case msgServiceRequest: + msg = new(serviceRequestMsg) + case msgServiceAccept: + msg = new(serviceAcceptMsg) + case msgKexInit: + msg = new(kexInitMsg) + case msgKexDHInit: + msg = new(kexDHInitMsg) + case msgKexDHReply: + msg = new(kexDHReplyMsg) + case msgUserAuthRequest: + msg = new(userAuthRequestMsg) + case msgUserAuthSuccess: + return new(userAuthSuccessMsg), nil + case msgUserAuthFailure: + msg = new(userAuthFailureMsg) + case msgUserAuthPubKeyOk: + msg = new(userAuthPubKeyOkMsg) + case msgGlobalRequest: + msg = new(globalRequestMsg) + case msgRequestSuccess: + msg = new(globalRequestSuccessMsg) + case msgRequestFailure: + msg = new(globalRequestFailureMsg) + case msgChannelOpen: + msg = new(channelOpenMsg) + case msgChannelData: + msg = new(channelDataMsg) + case msgChannelOpenConfirm: + msg = new(channelOpenConfirmMsg) + case msgChannelOpenFailure: + msg = new(channelOpenFailureMsg) + case msgChannelWindowAdjust: + msg = new(windowAdjustMsg) + case msgChannelEOF: + msg = new(channelEOFMsg) + case msgChannelClose: + msg = new(channelCloseMsg) + case msgChannelRequest: + msg = new(channelRequestMsg) + case msgChannelSuccess: + msg = new(channelRequestSuccessMsg) + case msgChannelFailure: + msg = new(channelRequestFailureMsg) + case msgUserAuthGSSAPIToken: + msg = new(userAuthGSSAPIToken) + case msgUserAuthGSSAPIMIC: + msg = new(userAuthGSSAPIMIC) + case msgUserAuthGSSAPIErrTok: + msg = new(userAuthGSSAPIErrTok) + case msgUserAuthGSSAPIError: + msg = new(userAuthGSSAPIError) + default: + return nil, unexpectedMessageError(0, packet[0]) + } + if err := Unmarshal(packet, msg); err != nil { + return nil, err + } + return msg, nil +} + +var packetTypeNames = map[byte]string{ + msgDisconnect: "disconnectMsg", + msgServiceRequest: "serviceRequestMsg", + msgServiceAccept: "serviceAcceptMsg", + msgKexInit: "kexInitMsg", + msgKexDHInit: "kexDHInitMsg", + msgKexDHReply: "kexDHReplyMsg", + msgUserAuthRequest: "userAuthRequestMsg", + msgUserAuthSuccess: "userAuthSuccessMsg", + msgUserAuthFailure: "userAuthFailureMsg", + msgUserAuthPubKeyOk: "userAuthPubKeyOkMsg", + msgGlobalRequest: "globalRequestMsg", + msgRequestSuccess: "globalRequestSuccessMsg", + msgRequestFailure: "globalRequestFailureMsg", + msgChannelOpen: "channelOpenMsg", + msgChannelData: "channelDataMsg", + msgChannelOpenConfirm: "channelOpenConfirmMsg", + msgChannelOpenFailure: "channelOpenFailureMsg", + msgChannelWindowAdjust: "windowAdjustMsg", + msgChannelEOF: "channelEOFMsg", + msgChannelClose: "channelCloseMsg", + msgChannelRequest: "channelRequestMsg", + msgChannelSuccess: "channelRequestSuccessMsg", + msgChannelFailure: "channelRequestFailureMsg", +} diff --git a/vendor/golang.org/x/crypto/ssh/mux.go b/vendor/golang.org/x/crypto/ssh/mux.go new file mode 100644 index 0000000..f190162 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/mux.go @@ -0,0 +1,330 @@ +// Copyright 2013 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "encoding/binary" + "fmt" + "io" + "log" + "sync" + "sync/atomic" +) + +// debugMux, if set, causes messages in the connection protocol to be +// logged. +const debugMux = false + +// chanList is a thread safe channel list. +type chanList struct { + // protects concurrent access to chans + sync.Mutex + + // chans are indexed by the local id of the channel, which the + // other side should send in the PeersId field. + chans []*channel + + // This is a debugging aid: it offsets all IDs by this + // amount. This helps distinguish otherwise identical + // server/client muxes + offset uint32 +} + +// Assigns a channel ID to the given channel. +func (c *chanList) add(ch *channel) uint32 { + c.Lock() + defer c.Unlock() + for i := range c.chans { + if c.chans[i] == nil { + c.chans[i] = ch + return uint32(i) + c.offset + } + } + c.chans = append(c.chans, ch) + return uint32(len(c.chans)-1) + c.offset +} + +// getChan returns the channel for the given ID. +func (c *chanList) getChan(id uint32) *channel { + id -= c.offset + + c.Lock() + defer c.Unlock() + if id < uint32(len(c.chans)) { + return c.chans[id] + } + return nil +} + +func (c *chanList) remove(id uint32) { + id -= c.offset + c.Lock() + if id < uint32(len(c.chans)) { + c.chans[id] = nil + } + c.Unlock() +} + +// dropAll forgets all channels it knows, returning them in a slice. +func (c *chanList) dropAll() []*channel { + c.Lock() + defer c.Unlock() + var r []*channel + + for _, ch := range c.chans { + if ch == nil { + continue + } + r = append(r, ch) + } + c.chans = nil + return r +} + +// mux represents the state for the SSH connection protocol, which +// multiplexes many channels onto a single packet transport. +type mux struct { + conn packetConn + chanList chanList + + incomingChannels chan NewChannel + + globalSentMu sync.Mutex + globalResponses chan interface{} + incomingRequests chan *Request + + errCond *sync.Cond + err error +} + +// When debugging, each new chanList instantiation has a different +// offset. +var globalOff uint32 + +func (m *mux) Wait() error { + m.errCond.L.Lock() + defer m.errCond.L.Unlock() + for m.err == nil { + m.errCond.Wait() + } + return m.err +} + +// newMux returns a mux that runs over the given connection. +func newMux(p packetConn) *mux { + m := &mux{ + conn: p, + incomingChannels: make(chan NewChannel, chanSize), + globalResponses: make(chan interface{}, 1), + incomingRequests: make(chan *Request, chanSize), + errCond: newCond(), + } + if debugMux { + m.chanList.offset = atomic.AddUint32(&globalOff, 1) + } + + go m.loop() + return m +} + +func (m *mux) sendMessage(msg interface{}) error { + p := Marshal(msg) + if debugMux { + log.Printf("send global(%d): %#v", m.chanList.offset, msg) + } + return m.conn.writePacket(p) +} + +func (m *mux) SendRequest(name string, wantReply bool, payload []byte) (bool, []byte, error) { + if wantReply { + m.globalSentMu.Lock() + defer m.globalSentMu.Unlock() + } + + if err := m.sendMessage(globalRequestMsg{ + Type: name, + WantReply: wantReply, + Data: payload, + }); err != nil { + return false, nil, err + } + + if !wantReply { + return false, nil, nil + } + + msg, ok := <-m.globalResponses + if !ok { + return false, nil, io.EOF + } + switch msg := msg.(type) { + case *globalRequestFailureMsg: + return false, msg.Data, nil + case *globalRequestSuccessMsg: + return true, msg.Data, nil + default: + return false, nil, fmt.Errorf("ssh: unexpected response to request: %#v", msg) + } +} + +// ackRequest must be called after processing a global request that +// has WantReply set. +func (m *mux) ackRequest(ok bool, data []byte) error { + if ok { + return m.sendMessage(globalRequestSuccessMsg{Data: data}) + } + return m.sendMessage(globalRequestFailureMsg{Data: data}) +} + +func (m *mux) Close() error { + return m.conn.Close() +} + +// loop runs the connection machine. It will process packets until an +// error is encountered. To synchronize on loop exit, use mux.Wait. +func (m *mux) loop() { + var err error + for err == nil { + err = m.onePacket() + } + + for _, ch := range m.chanList.dropAll() { + ch.close() + } + + close(m.incomingChannels) + close(m.incomingRequests) + close(m.globalResponses) + + m.conn.Close() + + m.errCond.L.Lock() + m.err = err + m.errCond.Broadcast() + m.errCond.L.Unlock() + + if debugMux { + log.Println("loop exit", err) + } +} + +// onePacket reads and processes one packet. +func (m *mux) onePacket() error { + packet, err := m.conn.readPacket() + if err != nil { + return err + } + + if debugMux { + if packet[0] == msgChannelData || packet[0] == msgChannelExtendedData { + log.Printf("decoding(%d): data packet - %d bytes", m.chanList.offset, len(packet)) + } else { + p, _ := decode(packet) + log.Printf("decoding(%d): %d %#v - %d bytes", m.chanList.offset, packet[0], p, len(packet)) + } + } + + switch packet[0] { + case msgChannelOpen: + return m.handleChannelOpen(packet) + case msgGlobalRequest, msgRequestSuccess, msgRequestFailure: + return m.handleGlobalPacket(packet) + } + + // assume a channel packet. + if len(packet) < 5 { + return parseError(packet[0]) + } + id := binary.BigEndian.Uint32(packet[1:]) + ch := m.chanList.getChan(id) + if ch == nil { + return fmt.Errorf("ssh: invalid channel %d", id) + } + + return ch.handlePacket(packet) +} + +func (m *mux) handleGlobalPacket(packet []byte) error { + msg, err := decode(packet) + if err != nil { + return err + } + + switch msg := msg.(type) { + case *globalRequestMsg: + m.incomingRequests <- &Request{ + Type: msg.Type, + WantReply: msg.WantReply, + Payload: msg.Data, + mux: m, + } + case *globalRequestSuccessMsg, *globalRequestFailureMsg: + m.globalResponses <- msg + default: + panic(fmt.Sprintf("not a global message %#v", msg)) + } + + return nil +} + +// handleChannelOpen schedules a channel to be Accept()ed. +func (m *mux) handleChannelOpen(packet []byte) error { + var msg channelOpenMsg + if err := Unmarshal(packet, &msg); err != nil { + return err + } + + if msg.MaxPacketSize < minPacketLength || msg.MaxPacketSize > 1<<31 { + failMsg := channelOpenFailureMsg{ + PeersID: msg.PeersID, + Reason: ConnectionFailed, + Message: "invalid request", + Language: "en_US.UTF-8", + } + return m.sendMessage(failMsg) + } + + c := m.newChannel(msg.ChanType, channelInbound, msg.TypeSpecificData) + c.remoteId = msg.PeersID + c.maxRemotePayload = msg.MaxPacketSize + c.remoteWin.add(msg.PeersWindow) + m.incomingChannels <- c + return nil +} + +func (m *mux) OpenChannel(chanType string, extra []byte) (Channel, <-chan *Request, error) { + ch, err := m.openChannel(chanType, extra) + if err != nil { + return nil, nil, err + } + + return ch, ch.incomingRequests, nil +} + +func (m *mux) openChannel(chanType string, extra []byte) (*channel, error) { + ch := m.newChannel(chanType, channelOutbound, extra) + + ch.maxIncomingPayload = channelMaxPacket + + open := channelOpenMsg{ + ChanType: chanType, + PeersWindow: ch.myWindow, + MaxPacketSize: ch.maxIncomingPayload, + TypeSpecificData: extra, + PeersID: ch.localId, + } + if err := m.sendMessage(open); err != nil { + return nil, err + } + + switch msg := (<-ch.msg).(type) { + case *channelOpenConfirmMsg: + return ch, nil + case *channelOpenFailureMsg: + return nil, &OpenChannelError{msg.Reason, msg.Message} + default: + return nil, fmt.Errorf("ssh: unexpected packet in response to channel open: %T", msg) + } +} diff --git a/vendor/golang.org/x/crypto/ssh/server.go b/vendor/golang.org/x/crypto/ssh/server.go new file mode 100644 index 0000000..7a5a1d7 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/server.go @@ -0,0 +1,716 @@ +// Copyright 2011 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "bytes" + "errors" + "fmt" + "io" + "net" + "strings" +) + +// The Permissions type holds fine-grained permissions that are +// specific to a user or a specific authentication method for a user. +// The Permissions value for a successful authentication attempt is +// available in ServerConn, so it can be used to pass information from +// the user-authentication phase to the application layer. +type Permissions struct { + // CriticalOptions indicate restrictions to the default + // permissions, and are typically used in conjunction with + // user certificates. The standard for SSH certificates + // defines "force-command" (only allow the given command to + // execute) and "source-address" (only allow connections from + // the given address). The SSH package currently only enforces + // the "source-address" critical option. It is up to server + // implementations to enforce other critical options, such as + // "force-command", by checking them after the SSH handshake + // is successful. In general, SSH servers should reject + // connections that specify critical options that are unknown + // or not supported. + CriticalOptions map[string]string + + // Extensions are extra functionality that the server may + // offer on authenticated connections. Lack of support for an + // extension does not preclude authenticating a user. Common + // extensions are "permit-agent-forwarding", + // "permit-X11-forwarding". The Go SSH library currently does + // not act on any extension, and it is up to server + // implementations to honor them. Extensions can be used to + // pass data from the authentication callbacks to the server + // application layer. + Extensions map[string]string +} + +type GSSAPIWithMICConfig struct { + // AllowLogin, must be set, is called when gssapi-with-mic + // authentication is selected (RFC 4462 section 3). The srcName is from the + // results of the GSS-API authentication. The format is username@DOMAIN. + // GSSAPI just guarantees to the server who the user is, but not if they can log in, and with what permissions. + // This callback is called after the user identity is established with GSSAPI to decide if the user can login with + // which permissions. If the user is allowed to login, it should return a nil error. + AllowLogin func(conn ConnMetadata, srcName string) (*Permissions, error) + + // Server must be set. It's the implementation + // of the GSSAPIServer interface. See GSSAPIServer interface for details. + Server GSSAPIServer +} + +// ServerConfig holds server specific configuration data. +type ServerConfig struct { + // Config contains configuration shared between client and server. + Config + + hostKeys []Signer + + // NoClientAuth is true if clients are allowed to connect without + // authenticating. + NoClientAuth bool + + // MaxAuthTries specifies the maximum number of authentication attempts + // permitted per connection. If set to a negative number, the number of + // attempts are unlimited. If set to zero, the number of attempts are limited + // to 6. + MaxAuthTries int + + // PasswordCallback, if non-nil, is called when a user + // attempts to authenticate using a password. + PasswordCallback func(conn ConnMetadata, password []byte) (*Permissions, error) + + // PublicKeyCallback, if non-nil, is called when a client + // offers a public key for authentication. It must return a nil error + // if the given public key can be used to authenticate the + // given user. For example, see CertChecker.Authenticate. A + // call to this function does not guarantee that the key + // offered is in fact used to authenticate. To record any data + // depending on the public key, store it inside a + // Permissions.Extensions entry. + PublicKeyCallback func(conn ConnMetadata, key PublicKey) (*Permissions, error) + + // KeyboardInteractiveCallback, if non-nil, is called when + // keyboard-interactive authentication is selected (RFC + // 4256). The client object's Challenge function should be + // used to query the user. The callback may offer multiple + // Challenge rounds. To avoid information leaks, the client + // should be presented a challenge even if the user is + // unknown. + KeyboardInteractiveCallback func(conn ConnMetadata, client KeyboardInteractiveChallenge) (*Permissions, error) + + // AuthLogCallback, if non-nil, is called to log all authentication + // attempts. + AuthLogCallback func(conn ConnMetadata, method string, err error) + + // ServerVersion is the version identification string to announce in + // the public handshake. + // If empty, a reasonable default is used. + // Note that RFC 4253 section 4.2 requires that this string start with + // "SSH-2.0-". + ServerVersion string + + // BannerCallback, if present, is called and the return string is sent to + // the client after key exchange completed but before authentication. + BannerCallback func(conn ConnMetadata) string + + // GSSAPIWithMICConfig includes gssapi server and callback, which if both non-nil, is used + // when gssapi-with-mic authentication is selected (RFC 4462 section 3). + GSSAPIWithMICConfig *GSSAPIWithMICConfig +} + +// AddHostKey adds a private key as a host key. If an existing host +// key exists with the same algorithm, it is overwritten. Each server +// config must have at least one host key. +func (s *ServerConfig) AddHostKey(key Signer) { + for i, k := range s.hostKeys { + if k.PublicKey().Type() == key.PublicKey().Type() { + s.hostKeys[i] = key + return + } + } + + s.hostKeys = append(s.hostKeys, key) +} + +// cachedPubKey contains the results of querying whether a public key is +// acceptable for a user. +type cachedPubKey struct { + user string + pubKeyData []byte + result error + perms *Permissions +} + +const maxCachedPubKeys = 16 + +// pubKeyCache caches tests for public keys. Since SSH clients +// will query whether a public key is acceptable before attempting to +// authenticate with it, we end up with duplicate queries for public +// key validity. The cache only applies to a single ServerConn. +type pubKeyCache struct { + keys []cachedPubKey +} + +// get returns the result for a given user/algo/key tuple. +func (c *pubKeyCache) get(user string, pubKeyData []byte) (cachedPubKey, bool) { + for _, k := range c.keys { + if k.user == user && bytes.Equal(k.pubKeyData, pubKeyData) { + return k, true + } + } + return cachedPubKey{}, false +} + +// add adds the given tuple to the cache. +func (c *pubKeyCache) add(candidate cachedPubKey) { + if len(c.keys) < maxCachedPubKeys { + c.keys = append(c.keys, candidate) + } +} + +// ServerConn is an authenticated SSH connection, as seen from the +// server +type ServerConn struct { + Conn + + // If the succeeding authentication callback returned a + // non-nil Permissions pointer, it is stored here. + Permissions *Permissions +} + +// NewServerConn starts a new SSH server with c as the underlying +// transport. It starts with a handshake and, if the handshake is +// unsuccessful, it closes the connection and returns an error. The +// Request and NewChannel channels must be serviced, or the connection +// will hang. +// +// The returned error may be of type *ServerAuthError for +// authentication errors. +func NewServerConn(c net.Conn, config *ServerConfig) (*ServerConn, <-chan NewChannel, <-chan *Request, error) { + fullConf := *config + fullConf.SetDefaults() + if fullConf.MaxAuthTries == 0 { + fullConf.MaxAuthTries = 6 + } + // Check if the config contains any unsupported key exchanges + for _, kex := range fullConf.KeyExchanges { + if _, ok := serverForbiddenKexAlgos[kex]; ok { + return nil, nil, nil, fmt.Errorf("ssh: unsupported key exchange %s for server", kex) + } + } + + s := &connection{ + sshConn: sshConn{conn: c}, + } + perms, err := s.serverHandshake(&fullConf) + if err != nil { + c.Close() + return nil, nil, nil, err + } + return &ServerConn{s, perms}, s.mux.incomingChannels, s.mux.incomingRequests, nil +} + +// signAndMarshal signs the data with the appropriate algorithm, +// and serializes the result in SSH wire format. +func signAndMarshal(k Signer, rand io.Reader, data []byte) ([]byte, error) { + sig, err := k.Sign(rand, data) + if err != nil { + return nil, err + } + + return Marshal(sig), nil +} + +// handshake performs key exchange and user authentication. +func (s *connection) serverHandshake(config *ServerConfig) (*Permissions, error) { + if len(config.hostKeys) == 0 { + return nil, errors.New("ssh: server has no host keys") + } + + if !config.NoClientAuth && config.PasswordCallback == nil && config.PublicKeyCallback == nil && + config.KeyboardInteractiveCallback == nil && (config.GSSAPIWithMICConfig == nil || + config.GSSAPIWithMICConfig.AllowLogin == nil || config.GSSAPIWithMICConfig.Server == nil) { + return nil, errors.New("ssh: no authentication methods configured but NoClientAuth is also false") + } + + if config.ServerVersion != "" { + s.serverVersion = []byte(config.ServerVersion) + } else { + s.serverVersion = []byte(packageVersion) + } + var err error + s.clientVersion, err = exchangeVersions(s.sshConn.conn, s.serverVersion) + if err != nil { + return nil, err + } + + tr := newTransport(s.sshConn.conn, config.Rand, false /* not client */) + s.transport = newServerTransport(tr, s.clientVersion, s.serverVersion, config) + + if err := s.transport.waitSession(); err != nil { + return nil, err + } + + // We just did the key change, so the session ID is established. + s.sessionID = s.transport.getSessionID() + + var packet []byte + if packet, err = s.transport.readPacket(); err != nil { + return nil, err + } + + var serviceRequest serviceRequestMsg + if err = Unmarshal(packet, &serviceRequest); err != nil { + return nil, err + } + if serviceRequest.Service != serviceUserAuth { + return nil, errors.New("ssh: requested service '" + serviceRequest.Service + "' before authenticating") + } + serviceAccept := serviceAcceptMsg{ + Service: serviceUserAuth, + } + if err := s.transport.writePacket(Marshal(&serviceAccept)); err != nil { + return nil, err + } + + perms, err := s.serverAuthenticate(config) + if err != nil { + return nil, err + } + s.mux = newMux(s.transport) + return perms, err +} + +func isAcceptableAlgo(algo string) bool { + switch algo { + case KeyAlgoRSA, KeyAlgoDSA, KeyAlgoECDSA256, KeyAlgoECDSA384, KeyAlgoECDSA521, KeyAlgoED25519, + CertAlgoRSAv01, CertAlgoDSAv01, CertAlgoECDSA256v01, CertAlgoECDSA384v01, CertAlgoECDSA521v01, CertAlgoED25519v01: + return true + } + return false +} + +func checkSourceAddress(addr net.Addr, sourceAddrs string) error { + if addr == nil { + return errors.New("ssh: no address known for client, but source-address match required") + } + + tcpAddr, ok := addr.(*net.TCPAddr) + if !ok { + return fmt.Errorf("ssh: remote address %v is not an TCP address when checking source-address match", addr) + } + + for _, sourceAddr := range strings.Split(sourceAddrs, ",") { + if allowedIP := net.ParseIP(sourceAddr); allowedIP != nil { + if allowedIP.Equal(tcpAddr.IP) { + return nil + } + } else { + _, ipNet, err := net.ParseCIDR(sourceAddr) + if err != nil { + return fmt.Errorf("ssh: error parsing source-address restriction %q: %v", sourceAddr, err) + } + + if ipNet.Contains(tcpAddr.IP) { + return nil + } + } + } + + return fmt.Errorf("ssh: remote address %v is not allowed because of source-address restriction", addr) +} + +func gssExchangeToken(gssapiConfig *GSSAPIWithMICConfig, firstToken []byte, s *connection, + sessionID []byte, userAuthReq userAuthRequestMsg) (authErr error, perms *Permissions, err error) { + gssAPIServer := gssapiConfig.Server + defer gssAPIServer.DeleteSecContext() + var srcName string + for { + var ( + outToken []byte + needContinue bool + ) + outToken, srcName, needContinue, err = gssAPIServer.AcceptSecContext(firstToken) + if err != nil { + return err, nil, nil + } + if len(outToken) != 0 { + if err := s.transport.writePacket(Marshal(&userAuthGSSAPIToken{ + Token: outToken, + })); err != nil { + return nil, nil, err + } + } + if !needContinue { + break + } + packet, err := s.transport.readPacket() + if err != nil { + return nil, nil, err + } + userAuthGSSAPITokenReq := &userAuthGSSAPIToken{} + if err := Unmarshal(packet, userAuthGSSAPITokenReq); err != nil { + return nil, nil, err + } + } + packet, err := s.transport.readPacket() + if err != nil { + return nil, nil, err + } + userAuthGSSAPIMICReq := &userAuthGSSAPIMIC{} + if err := Unmarshal(packet, userAuthGSSAPIMICReq); err != nil { + return nil, nil, err + } + mic := buildMIC(string(sessionID), userAuthReq.User, userAuthReq.Service, userAuthReq.Method) + if err := gssAPIServer.VerifyMIC(mic, userAuthGSSAPIMICReq.MIC); err != nil { + return err, nil, nil + } + perms, authErr = gssapiConfig.AllowLogin(s, srcName) + return authErr, perms, nil +} + +// ServerAuthError represents server authentication errors and is +// sometimes returned by NewServerConn. It appends any authentication +// errors that may occur, and is returned if all of the authentication +// methods provided by the user failed to authenticate. +type ServerAuthError struct { + // Errors contains authentication errors returned by the authentication + // callback methods. The first entry is typically ErrNoAuth. + Errors []error +} + +func (l ServerAuthError) Error() string { + var errs []string + for _, err := range l.Errors { + errs = append(errs, err.Error()) + } + return "[" + strings.Join(errs, ", ") + "]" +} + +// ErrNoAuth is the error value returned if no +// authentication method has been passed yet. This happens as a normal +// part of the authentication loop, since the client first tries +// 'none' authentication to discover available methods. +// It is returned in ServerAuthError.Errors from NewServerConn. +var ErrNoAuth = errors.New("ssh: no auth passed yet") + +func (s *connection) serverAuthenticate(config *ServerConfig) (*Permissions, error) { + sessionID := s.transport.getSessionID() + var cache pubKeyCache + var perms *Permissions + + authFailures := 0 + var authErrs []error + var displayedBanner bool + +userAuthLoop: + for { + if authFailures >= config.MaxAuthTries && config.MaxAuthTries > 0 { + discMsg := &disconnectMsg{ + Reason: 2, + Message: "too many authentication failures", + } + + if err := s.transport.writePacket(Marshal(discMsg)); err != nil { + return nil, err + } + + return nil, discMsg + } + + var userAuthReq userAuthRequestMsg + if packet, err := s.transport.readPacket(); err != nil { + if err == io.EOF { + return nil, &ServerAuthError{Errors: authErrs} + } + return nil, err + } else if err = Unmarshal(packet, &userAuthReq); err != nil { + return nil, err + } + + if userAuthReq.Service != serviceSSH { + return nil, errors.New("ssh: client attempted to negotiate for unknown service: " + userAuthReq.Service) + } + + s.user = userAuthReq.User + + if !displayedBanner && config.BannerCallback != nil { + displayedBanner = true + msg := config.BannerCallback(s) + if msg != "" { + bannerMsg := &userAuthBannerMsg{ + Message: msg, + } + if err := s.transport.writePacket(Marshal(bannerMsg)); err != nil { + return nil, err + } + } + } + + perms = nil + authErr := ErrNoAuth + + switch userAuthReq.Method { + case "none": + if config.NoClientAuth { + authErr = nil + } + + // allow initial attempt of 'none' without penalty + if authFailures == 0 { + authFailures-- + } + case "password": + if config.PasswordCallback == nil { + authErr = errors.New("ssh: password auth not configured") + break + } + payload := userAuthReq.Payload + if len(payload) < 1 || payload[0] != 0 { + return nil, parseError(msgUserAuthRequest) + } + payload = payload[1:] + password, payload, ok := parseString(payload) + if !ok || len(payload) > 0 { + return nil, parseError(msgUserAuthRequest) + } + + perms, authErr = config.PasswordCallback(s, password) + case "keyboard-interactive": + if config.KeyboardInteractiveCallback == nil { + authErr = errors.New("ssh: keyboard-interactive auth not configured") + break + } + + prompter := &sshClientKeyboardInteractive{s} + perms, authErr = config.KeyboardInteractiveCallback(s, prompter.Challenge) + case "publickey": + if config.PublicKeyCallback == nil { + authErr = errors.New("ssh: publickey auth not configured") + break + } + payload := userAuthReq.Payload + if len(payload) < 1 { + return nil, parseError(msgUserAuthRequest) + } + isQuery := payload[0] == 0 + payload = payload[1:] + algoBytes, payload, ok := parseString(payload) + if !ok { + return nil, parseError(msgUserAuthRequest) + } + algo := string(algoBytes) + if !isAcceptableAlgo(algo) { + authErr = fmt.Errorf("ssh: algorithm %q not accepted", algo) + break + } + + pubKeyData, payload, ok := parseString(payload) + if !ok { + return nil, parseError(msgUserAuthRequest) + } + + pubKey, err := ParsePublicKey(pubKeyData) + if err != nil { + return nil, err + } + + candidate, ok := cache.get(s.user, pubKeyData) + if !ok { + candidate.user = s.user + candidate.pubKeyData = pubKeyData + candidate.perms, candidate.result = config.PublicKeyCallback(s, pubKey) + if candidate.result == nil && candidate.perms != nil && candidate.perms.CriticalOptions != nil && candidate.perms.CriticalOptions[sourceAddressCriticalOption] != "" { + candidate.result = checkSourceAddress( + s.RemoteAddr(), + candidate.perms.CriticalOptions[sourceAddressCriticalOption]) + } + cache.add(candidate) + } + + if isQuery { + // The client can query if the given public key + // would be okay. + + if len(payload) > 0 { + return nil, parseError(msgUserAuthRequest) + } + + if candidate.result == nil { + okMsg := userAuthPubKeyOkMsg{ + Algo: algo, + PubKey: pubKeyData, + } + if err = s.transport.writePacket(Marshal(&okMsg)); err != nil { + return nil, err + } + continue userAuthLoop + } + authErr = candidate.result + } else { + sig, payload, ok := parseSignature(payload) + if !ok || len(payload) > 0 { + return nil, parseError(msgUserAuthRequest) + } + // Ensure the public key algo and signature algo + // are supported. Compare the private key + // algorithm name that corresponds to algo with + // sig.Format. This is usually the same, but + // for certs, the names differ. + if !isAcceptableAlgo(sig.Format) { + authErr = fmt.Errorf("ssh: algorithm %q not accepted", sig.Format) + break + } + signedData := buildDataSignedForAuth(sessionID, userAuthReq, algoBytes, pubKeyData) + + if err := pubKey.Verify(signedData, sig); err != nil { + return nil, err + } + + authErr = candidate.result + perms = candidate.perms + } + case "gssapi-with-mic": + gssapiConfig := config.GSSAPIWithMICConfig + userAuthRequestGSSAPI, err := parseGSSAPIPayload(userAuthReq.Payload) + if err != nil { + return nil, parseError(msgUserAuthRequest) + } + // OpenSSH supports Kerberos V5 mechanism only for GSS-API authentication. + if userAuthRequestGSSAPI.N == 0 { + authErr = fmt.Errorf("ssh: Mechanism negotiation is not supported") + break + } + var i uint32 + present := false + for i = 0; i < userAuthRequestGSSAPI.N; i++ { + if userAuthRequestGSSAPI.OIDS[i].Equal(krb5Mesh) { + present = true + break + } + } + if !present { + authErr = fmt.Errorf("ssh: GSSAPI authentication must use the Kerberos V5 mechanism") + break + } + // Initial server response, see RFC 4462 section 3.3. + if err := s.transport.writePacket(Marshal(&userAuthGSSAPIResponse{ + SupportMech: krb5OID, + })); err != nil { + return nil, err + } + // Exchange token, see RFC 4462 section 3.4. + packet, err := s.transport.readPacket() + if err != nil { + return nil, err + } + userAuthGSSAPITokenReq := &userAuthGSSAPIToken{} + if err := Unmarshal(packet, userAuthGSSAPITokenReq); err != nil { + return nil, err + } + authErr, perms, err = gssExchangeToken(gssapiConfig, userAuthGSSAPITokenReq.Token, s, sessionID, + userAuthReq) + if err != nil { + return nil, err + } + default: + authErr = fmt.Errorf("ssh: unknown method %q", userAuthReq.Method) + } + + authErrs = append(authErrs, authErr) + + if config.AuthLogCallback != nil { + config.AuthLogCallback(s, userAuthReq.Method, authErr) + } + + if authErr == nil { + break userAuthLoop + } + + authFailures++ + + var failureMsg userAuthFailureMsg + if config.PasswordCallback != nil { + failureMsg.Methods = append(failureMsg.Methods, "password") + } + if config.PublicKeyCallback != nil { + failureMsg.Methods = append(failureMsg.Methods, "publickey") + } + if config.KeyboardInteractiveCallback != nil { + failureMsg.Methods = append(failureMsg.Methods, "keyboard-interactive") + } + if config.GSSAPIWithMICConfig != nil && config.GSSAPIWithMICConfig.Server != nil && + config.GSSAPIWithMICConfig.AllowLogin != nil { + failureMsg.Methods = append(failureMsg.Methods, "gssapi-with-mic") + } + + if len(failureMsg.Methods) == 0 { + return nil, errors.New("ssh: no authentication methods configured but NoClientAuth is also false") + } + + if err := s.transport.writePacket(Marshal(&failureMsg)); err != nil { + return nil, err + } + } + + if err := s.transport.writePacket([]byte{msgUserAuthSuccess}); err != nil { + return nil, err + } + return perms, nil +} + +// sshClientKeyboardInteractive implements a ClientKeyboardInteractive by +// asking the client on the other side of a ServerConn. +type sshClientKeyboardInteractive struct { + *connection +} + +func (c *sshClientKeyboardInteractive) Challenge(user, instruction string, questions []string, echos []bool) (answers []string, err error) { + if len(questions) != len(echos) { + return nil, errors.New("ssh: echos and questions must have equal length") + } + + var prompts []byte + for i := range questions { + prompts = appendString(prompts, questions[i]) + prompts = appendBool(prompts, echos[i]) + } + + if err := c.transport.writePacket(Marshal(&userAuthInfoRequestMsg{ + Instruction: instruction, + NumPrompts: uint32(len(questions)), + Prompts: prompts, + })); err != nil { + return nil, err + } + + packet, err := c.transport.readPacket() + if err != nil { + return nil, err + } + if packet[0] != msgUserAuthInfoResponse { + return nil, unexpectedMessageError(msgUserAuthInfoResponse, packet[0]) + } + packet = packet[1:] + + n, packet, ok := parseUint32(packet) + if !ok || int(n) != len(questions) { + return nil, parseError(msgUserAuthInfoResponse) + } + + for i := uint32(0); i < n; i++ { + ans, rest, ok := parseString(packet) + if !ok { + return nil, parseError(msgUserAuthInfoResponse) + } + + answers = append(answers, string(ans)) + packet = rest + } + if len(packet) != 0 { + return nil, errors.New("ssh: junk at end of message") + } + + return answers, nil +} diff --git a/vendor/golang.org/x/crypto/ssh/session.go b/vendor/golang.org/x/crypto/ssh/session.go new file mode 100644 index 0000000..d3321f6 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/session.go @@ -0,0 +1,647 @@ +// Copyright 2011 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +// Session implements an interactive session described in +// "RFC 4254, section 6". + +import ( + "bytes" + "encoding/binary" + "errors" + "fmt" + "io" + "io/ioutil" + "sync" +) + +type Signal string + +// POSIX signals as listed in RFC 4254 Section 6.10. +const ( + SIGABRT Signal = "ABRT" + SIGALRM Signal = "ALRM" + SIGFPE Signal = "FPE" + SIGHUP Signal = "HUP" + SIGILL Signal = "ILL" + SIGINT Signal = "INT" + SIGKILL Signal = "KILL" + SIGPIPE Signal = "PIPE" + SIGQUIT Signal = "QUIT" + SIGSEGV Signal = "SEGV" + SIGTERM Signal = "TERM" + SIGUSR1 Signal = "USR1" + SIGUSR2 Signal = "USR2" +) + +var signals = map[Signal]int{ + SIGABRT: 6, + SIGALRM: 14, + SIGFPE: 8, + SIGHUP: 1, + SIGILL: 4, + SIGINT: 2, + SIGKILL: 9, + SIGPIPE: 13, + SIGQUIT: 3, + SIGSEGV: 11, + SIGTERM: 15, +} + +type TerminalModes map[uint8]uint32 + +// POSIX terminal mode flags as listed in RFC 4254 Section 8. +const ( + tty_OP_END = 0 + VINTR = 1 + VQUIT = 2 + VERASE = 3 + VKILL = 4 + VEOF = 5 + VEOL = 6 + VEOL2 = 7 + VSTART = 8 + VSTOP = 9 + VSUSP = 10 + VDSUSP = 11 + VREPRINT = 12 + VWERASE = 13 + VLNEXT = 14 + VFLUSH = 15 + VSWTCH = 16 + VSTATUS = 17 + VDISCARD = 18 + IGNPAR = 30 + PARMRK = 31 + INPCK = 32 + ISTRIP = 33 + INLCR = 34 + IGNCR = 35 + ICRNL = 36 + IUCLC = 37 + IXON = 38 + IXANY = 39 + IXOFF = 40 + IMAXBEL = 41 + ISIG = 50 + ICANON = 51 + XCASE = 52 + ECHO = 53 + ECHOE = 54 + ECHOK = 55 + ECHONL = 56 + NOFLSH = 57 + TOSTOP = 58 + IEXTEN = 59 + ECHOCTL = 60 + ECHOKE = 61 + PENDIN = 62 + OPOST = 70 + OLCUC = 71 + ONLCR = 72 + OCRNL = 73 + ONOCR = 74 + ONLRET = 75 + CS7 = 90 + CS8 = 91 + PARENB = 92 + PARODD = 93 + TTY_OP_ISPEED = 128 + TTY_OP_OSPEED = 129 +) + +// A Session represents a connection to a remote command or shell. +type Session struct { + // Stdin specifies the remote process's standard input. + // If Stdin is nil, the remote process reads from an empty + // bytes.Buffer. + Stdin io.Reader + + // Stdout and Stderr specify the remote process's standard + // output and error. + // + // If either is nil, Run connects the corresponding file + // descriptor to an instance of ioutil.Discard. There is a + // fixed amount of buffering that is shared for the two streams. + // If either blocks it may eventually cause the remote + // command to block. + Stdout io.Writer + Stderr io.Writer + + ch Channel // the channel backing this session + started bool // true once Start, Run or Shell is invoked. + copyFuncs []func() error + errors chan error // one send per copyFunc + + // true if pipe method is active + stdinpipe, stdoutpipe, stderrpipe bool + + // stdinPipeWriter is non-nil if StdinPipe has not been called + // and Stdin was specified by the user; it is the write end of + // a pipe connecting Session.Stdin to the stdin channel. + stdinPipeWriter io.WriteCloser + + exitStatus chan error +} + +// SendRequest sends an out-of-band channel request on the SSH channel +// underlying the session. +func (s *Session) SendRequest(name string, wantReply bool, payload []byte) (bool, error) { + return s.ch.SendRequest(name, wantReply, payload) +} + +func (s *Session) Close() error { + return s.ch.Close() +} + +// RFC 4254 Section 6.4. +type setenvRequest struct { + Name string + Value string +} + +// Setenv sets an environment variable that will be applied to any +// command executed by Shell or Run. +func (s *Session) Setenv(name, value string) error { + msg := setenvRequest{ + Name: name, + Value: value, + } + ok, err := s.ch.SendRequest("env", true, Marshal(&msg)) + if err == nil && !ok { + err = errors.New("ssh: setenv failed") + } + return err +} + +// RFC 4254 Section 6.2. +type ptyRequestMsg struct { + Term string + Columns uint32 + Rows uint32 + Width uint32 + Height uint32 + Modelist string +} + +// RequestPty requests the association of a pty with the session on the remote host. +func (s *Session) RequestPty(term string, h, w int, termmodes TerminalModes) error { + var tm []byte + for k, v := range termmodes { + kv := struct { + Key byte + Val uint32 + }{k, v} + + tm = append(tm, Marshal(&kv)...) + } + tm = append(tm, tty_OP_END) + req := ptyRequestMsg{ + Term: term, + Columns: uint32(w), + Rows: uint32(h), + Width: uint32(w * 8), + Height: uint32(h * 8), + Modelist: string(tm), + } + ok, err := s.ch.SendRequest("pty-req", true, Marshal(&req)) + if err == nil && !ok { + err = errors.New("ssh: pty-req failed") + } + return err +} + +// RFC 4254 Section 6.5. +type subsystemRequestMsg struct { + Subsystem string +} + +// RequestSubsystem requests the association of a subsystem with the session on the remote host. +// A subsystem is a predefined command that runs in the background when the ssh session is initiated +func (s *Session) RequestSubsystem(subsystem string) error { + msg := subsystemRequestMsg{ + Subsystem: subsystem, + } + ok, err := s.ch.SendRequest("subsystem", true, Marshal(&msg)) + if err == nil && !ok { + err = errors.New("ssh: subsystem request failed") + } + return err +} + +// RFC 4254 Section 6.7. +type ptyWindowChangeMsg struct { + Columns uint32 + Rows uint32 + Width uint32 + Height uint32 +} + +// WindowChange informs the remote host about a terminal window dimension change to h rows and w columns. +func (s *Session) WindowChange(h, w int) error { + req := ptyWindowChangeMsg{ + Columns: uint32(w), + Rows: uint32(h), + Width: uint32(w * 8), + Height: uint32(h * 8), + } + _, err := s.ch.SendRequest("window-change", false, Marshal(&req)) + return err +} + +// RFC 4254 Section 6.9. +type signalMsg struct { + Signal string +} + +// Signal sends the given signal to the remote process. +// sig is one of the SIG* constants. +func (s *Session) Signal(sig Signal) error { + msg := signalMsg{ + Signal: string(sig), + } + + _, err := s.ch.SendRequest("signal", false, Marshal(&msg)) + return err +} + +// RFC 4254 Section 6.5. +type execMsg struct { + Command string +} + +// Start runs cmd on the remote host. Typically, the remote +// server passes cmd to the shell for interpretation. +// A Session only accepts one call to Run, Start or Shell. +func (s *Session) Start(cmd string) error { + if s.started { + return errors.New("ssh: session already started") + } + req := execMsg{ + Command: cmd, + } + + ok, err := s.ch.SendRequest("exec", true, Marshal(&req)) + if err == nil && !ok { + err = fmt.Errorf("ssh: command %v failed", cmd) + } + if err != nil { + return err + } + return s.start() +} + +// Run runs cmd on the remote host. Typically, the remote +// server passes cmd to the shell for interpretation. +// A Session only accepts one call to Run, Start, Shell, Output, +// or CombinedOutput. +// +// The returned error is nil if the command runs, has no problems +// copying stdin, stdout, and stderr, and exits with a zero exit +// status. +// +// If the remote server does not send an exit status, an error of type +// *ExitMissingError is returned. If the command completes +// unsuccessfully or is interrupted by a signal, the error is of type +// *ExitError. Other error types may be returned for I/O problems. +func (s *Session) Run(cmd string) error { + err := s.Start(cmd) + if err != nil { + return err + } + return s.Wait() +} + +// Output runs cmd on the remote host and returns its standard output. +func (s *Session) Output(cmd string) ([]byte, error) { + if s.Stdout != nil { + return nil, errors.New("ssh: Stdout already set") + } + var b bytes.Buffer + s.Stdout = &b + err := s.Run(cmd) + return b.Bytes(), err +} + +type singleWriter struct { + b bytes.Buffer + mu sync.Mutex +} + +func (w *singleWriter) Write(p []byte) (int, error) { + w.mu.Lock() + defer w.mu.Unlock() + return w.b.Write(p) +} + +// CombinedOutput runs cmd on the remote host and returns its combined +// standard output and standard error. +func (s *Session) CombinedOutput(cmd string) ([]byte, error) { + if s.Stdout != nil { + return nil, errors.New("ssh: Stdout already set") + } + if s.Stderr != nil { + return nil, errors.New("ssh: Stderr already set") + } + var b singleWriter + s.Stdout = &b + s.Stderr = &b + err := s.Run(cmd) + return b.b.Bytes(), err +} + +// Shell starts a login shell on the remote host. A Session only +// accepts one call to Run, Start, Shell, Output, or CombinedOutput. +func (s *Session) Shell() error { + if s.started { + return errors.New("ssh: session already started") + } + + ok, err := s.ch.SendRequest("shell", true, nil) + if err == nil && !ok { + return errors.New("ssh: could not start shell") + } + if err != nil { + return err + } + return s.start() +} + +func (s *Session) start() error { + s.started = true + + type F func(*Session) + for _, setupFd := range []F{(*Session).stdin, (*Session).stdout, (*Session).stderr} { + setupFd(s) + } + + s.errors = make(chan error, len(s.copyFuncs)) + for _, fn := range s.copyFuncs { + go func(fn func() error) { + s.errors <- fn() + }(fn) + } + return nil +} + +// Wait waits for the remote command to exit. +// +// The returned error is nil if the command runs, has no problems +// copying stdin, stdout, and stderr, and exits with a zero exit +// status. +// +// If the remote server does not send an exit status, an error of type +// *ExitMissingError is returned. If the command completes +// unsuccessfully or is interrupted by a signal, the error is of type +// *ExitError. Other error types may be returned for I/O problems. +func (s *Session) Wait() error { + if !s.started { + return errors.New("ssh: session not started") + } + waitErr := <-s.exitStatus + + if s.stdinPipeWriter != nil { + s.stdinPipeWriter.Close() + } + var copyError error + for range s.copyFuncs { + if err := <-s.errors; err != nil && copyError == nil { + copyError = err + } + } + if waitErr != nil { + return waitErr + } + return copyError +} + +func (s *Session) wait(reqs <-chan *Request) error { + wm := Waitmsg{status: -1} + // Wait for msg channel to be closed before returning. + for msg := range reqs { + switch msg.Type { + case "exit-status": + wm.status = int(binary.BigEndian.Uint32(msg.Payload)) + case "exit-signal": + var sigval struct { + Signal string + CoreDumped bool + Error string + Lang string + } + if err := Unmarshal(msg.Payload, &sigval); err != nil { + return err + } + + // Must sanitize strings? + wm.signal = sigval.Signal + wm.msg = sigval.Error + wm.lang = sigval.Lang + default: + // This handles keepalives and matches + // OpenSSH's behaviour. + if msg.WantReply { + msg.Reply(false, nil) + } + } + } + if wm.status == 0 { + return nil + } + if wm.status == -1 { + // exit-status was never sent from server + if wm.signal == "" { + // signal was not sent either. RFC 4254 + // section 6.10 recommends against this + // behavior, but it is allowed, so we let + // clients handle it. + return &ExitMissingError{} + } + wm.status = 128 + if _, ok := signals[Signal(wm.signal)]; ok { + wm.status += signals[Signal(wm.signal)] + } + } + + return &ExitError{wm} +} + +// ExitMissingError is returned if a session is torn down cleanly, but +// the server sends no confirmation of the exit status. +type ExitMissingError struct{} + +func (e *ExitMissingError) Error() string { + return "wait: remote command exited without exit status or exit signal" +} + +func (s *Session) stdin() { + if s.stdinpipe { + return + } + var stdin io.Reader + if s.Stdin == nil { + stdin = new(bytes.Buffer) + } else { + r, w := io.Pipe() + go func() { + _, err := io.Copy(w, s.Stdin) + w.CloseWithError(err) + }() + stdin, s.stdinPipeWriter = r, w + } + s.copyFuncs = append(s.copyFuncs, func() error { + _, err := io.Copy(s.ch, stdin) + if err1 := s.ch.CloseWrite(); err == nil && err1 != io.EOF { + err = err1 + } + return err + }) +} + +func (s *Session) stdout() { + if s.stdoutpipe { + return + } + if s.Stdout == nil { + s.Stdout = ioutil.Discard + } + s.copyFuncs = append(s.copyFuncs, func() error { + _, err := io.Copy(s.Stdout, s.ch) + return err + }) +} + +func (s *Session) stderr() { + if s.stderrpipe { + return + } + if s.Stderr == nil { + s.Stderr = ioutil.Discard + } + s.copyFuncs = append(s.copyFuncs, func() error { + _, err := io.Copy(s.Stderr, s.ch.Stderr()) + return err + }) +} + +// sessionStdin reroutes Close to CloseWrite. +type sessionStdin struct { + io.Writer + ch Channel +} + +func (s *sessionStdin) Close() error { + return s.ch.CloseWrite() +} + +// StdinPipe returns a pipe that will be connected to the +// remote command's standard input when the command starts. +func (s *Session) StdinPipe() (io.WriteCloser, error) { + if s.Stdin != nil { + return nil, errors.New("ssh: Stdin already set") + } + if s.started { + return nil, errors.New("ssh: StdinPipe after process started") + } + s.stdinpipe = true + return &sessionStdin{s.ch, s.ch}, nil +} + +// StdoutPipe returns a pipe that will be connected to the +// remote command's standard output when the command starts. +// There is a fixed amount of buffering that is shared between +// stdout and stderr streams. If the StdoutPipe reader is +// not serviced fast enough it may eventually cause the +// remote command to block. +func (s *Session) StdoutPipe() (io.Reader, error) { + if s.Stdout != nil { + return nil, errors.New("ssh: Stdout already set") + } + if s.started { + return nil, errors.New("ssh: StdoutPipe after process started") + } + s.stdoutpipe = true + return s.ch, nil +} + +// StderrPipe returns a pipe that will be connected to the +// remote command's standard error when the command starts. +// There is a fixed amount of buffering that is shared between +// stdout and stderr streams. If the StderrPipe reader is +// not serviced fast enough it may eventually cause the +// remote command to block. +func (s *Session) StderrPipe() (io.Reader, error) { + if s.Stderr != nil { + return nil, errors.New("ssh: Stderr already set") + } + if s.started { + return nil, errors.New("ssh: StderrPipe after process started") + } + s.stderrpipe = true + return s.ch.Stderr(), nil +} + +// newSession returns a new interactive session on the remote host. +func newSession(ch Channel, reqs <-chan *Request) (*Session, error) { + s := &Session{ + ch: ch, + } + s.exitStatus = make(chan error, 1) + go func() { + s.exitStatus <- s.wait(reqs) + }() + + return s, nil +} + +// An ExitError reports unsuccessful completion of a remote command. +type ExitError struct { + Waitmsg +} + +func (e *ExitError) Error() string { + return e.Waitmsg.String() +} + +// Waitmsg stores the information about an exited remote command +// as reported by Wait. +type Waitmsg struct { + status int + signal string + msg string + lang string +} + +// ExitStatus returns the exit status of the remote command. +func (w Waitmsg) ExitStatus() int { + return w.status +} + +// Signal returns the exit signal of the remote command if +// it was terminated violently. +func (w Waitmsg) Signal() string { + return w.signal +} + +// Msg returns the exit message given by the remote command +func (w Waitmsg) Msg() string { + return w.msg +} + +// Lang returns the language tag. See RFC 3066 +func (w Waitmsg) Lang() string { + return w.lang +} + +func (w Waitmsg) String() string { + str := fmt.Sprintf("Process exited with status %v", w.status) + if w.signal != "" { + str += fmt.Sprintf(" from signal %v", w.signal) + } + if w.msg != "" { + str += fmt.Sprintf(". Reason was: %v", w.msg) + } + return str +} diff --git a/vendor/golang.org/x/crypto/ssh/ssh_gss.go b/vendor/golang.org/x/crypto/ssh/ssh_gss.go new file mode 100644 index 0000000..24bd7c8 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/ssh_gss.go @@ -0,0 +1,139 @@ +// Copyright 2011 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "encoding/asn1" + "errors" +) + +var krb5OID []byte + +func init() { + krb5OID, _ = asn1.Marshal(krb5Mesh) +} + +// GSSAPIClient provides the API to plug-in GSSAPI authentication for client logins. +type GSSAPIClient interface { + // InitSecContext initiates the establishment of a security context for GSS-API between the + // ssh client and ssh server. Initially the token parameter should be specified as nil. + // The routine may return a outputToken which should be transferred to + // the ssh server, where the ssh server will present it to + // AcceptSecContext. If no token need be sent, InitSecContext will indicate this by setting + // needContinue to false. To complete the context + // establishment, one or more reply tokens may be required from the ssh + // server;if so, InitSecContext will return a needContinue which is true. + // In this case, InitSecContext should be called again when the + // reply token is received from the ssh server, passing the reply + // token to InitSecContext via the token parameters. + // See RFC 2743 section 2.2.1 and RFC 4462 section 3.4. + InitSecContext(target string, token []byte, isGSSDelegCreds bool) (outputToken []byte, needContinue bool, err error) + // GetMIC generates a cryptographic MIC for the SSH2 message, and places + // the MIC in a token for transfer to the ssh server. + // The contents of the MIC field are obtained by calling GSS_GetMIC() + // over the following, using the GSS-API context that was just + // established: + // string session identifier + // byte SSH_MSG_USERAUTH_REQUEST + // string user name + // string service + // string "gssapi-with-mic" + // See RFC 2743 section 2.3.1 and RFC 4462 3.5. + GetMIC(micFiled []byte) ([]byte, error) + // Whenever possible, it should be possible for + // DeleteSecContext() calls to be successfully processed even + // if other calls cannot succeed, thereby enabling context-related + // resources to be released. + // In addition to deleting established security contexts, + // gss_delete_sec_context must also be able to delete "half-built" + // security contexts resulting from an incomplete sequence of + // InitSecContext()/AcceptSecContext() calls. + // See RFC 2743 section 2.2.3. + DeleteSecContext() error +} + +// GSSAPIServer provides the API to plug in GSSAPI authentication for server logins. +type GSSAPIServer interface { + // AcceptSecContext allows a remotely initiated security context between the application + // and a remote peer to be established by the ssh client. The routine may return a + // outputToken which should be transferred to the ssh client, + // where the ssh client will present it to InitSecContext. + // If no token need be sent, AcceptSecContext will indicate this + // by setting the needContinue to false. To + // complete the context establishment, one or more reply tokens may be + // required from the ssh client. if so, AcceptSecContext + // will return a needContinue which is true, in which case it + // should be called again when the reply token is received from the ssh + // client, passing the token to AcceptSecContext via the + // token parameters. + // The srcName return value is the authenticated username. + // See RFC 2743 section 2.2.2 and RFC 4462 section 3.4. + AcceptSecContext(token []byte) (outputToken []byte, srcName string, needContinue bool, err error) + // VerifyMIC verifies that a cryptographic MIC, contained in the token parameter, + // fits the supplied message is received from the ssh client. + // See RFC 2743 section 2.3.2. + VerifyMIC(micField []byte, micToken []byte) error + // Whenever possible, it should be possible for + // DeleteSecContext() calls to be successfully processed even + // if other calls cannot succeed, thereby enabling context-related + // resources to be released. + // In addition to deleting established security contexts, + // gss_delete_sec_context must also be able to delete "half-built" + // security contexts resulting from an incomplete sequence of + // InitSecContext()/AcceptSecContext() calls. + // See RFC 2743 section 2.2.3. + DeleteSecContext() error +} + +var ( + // OpenSSH supports Kerberos V5 mechanism only for GSS-API authentication, + // so we also support the krb5 mechanism only. + // See RFC 1964 section 1. + krb5Mesh = asn1.ObjectIdentifier{1, 2, 840, 113554, 1, 2, 2} +) + +// The GSS-API authentication method is initiated when the client sends an SSH_MSG_USERAUTH_REQUEST +// See RFC 4462 section 3.2. +type userAuthRequestGSSAPI struct { + N uint32 + OIDS []asn1.ObjectIdentifier +} + +func parseGSSAPIPayload(payload []byte) (*userAuthRequestGSSAPI, error) { + n, rest, ok := parseUint32(payload) + if !ok { + return nil, errors.New("parse uint32 failed") + } + s := &userAuthRequestGSSAPI{ + N: n, + OIDS: make([]asn1.ObjectIdentifier, n), + } + for i := 0; i < int(n); i++ { + var ( + desiredMech []byte + err error + ) + desiredMech, rest, ok = parseString(rest) + if !ok { + return nil, errors.New("parse string failed") + } + if rest, err = asn1.Unmarshal(desiredMech, &s.OIDS[i]); err != nil { + return nil, err + } + + } + return s, nil +} + +// See RFC 4462 section 3.6. +func buildMIC(sessionID string, username string, service string, authMethod string) []byte { + out := make([]byte, 0, 0) + out = appendString(out, sessionID) + out = append(out, msgUserAuthRequest) + out = appendString(out, username) + out = appendString(out, service) + out = appendString(out, authMethod) + return out +} diff --git a/vendor/golang.org/x/crypto/ssh/streamlocal.go b/vendor/golang.org/x/crypto/ssh/streamlocal.go new file mode 100644 index 0000000..b171b33 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/streamlocal.go @@ -0,0 +1,116 @@ +package ssh + +import ( + "errors" + "io" + "net" +) + +// streamLocalChannelOpenDirectMsg is a struct used for SSH_MSG_CHANNEL_OPEN message +// with "direct-streamlocal@openssh.com" string. +// +// See openssh-portable/PROTOCOL, section 2.4. connection: Unix domain socket forwarding +// https://github.com/openssh/openssh-portable/blob/master/PROTOCOL#L235 +type streamLocalChannelOpenDirectMsg struct { + socketPath string + reserved0 string + reserved1 uint32 +} + +// forwardedStreamLocalPayload is a struct used for SSH_MSG_CHANNEL_OPEN message +// with "forwarded-streamlocal@openssh.com" string. +type forwardedStreamLocalPayload struct { + SocketPath string + Reserved0 string +} + +// streamLocalChannelForwardMsg is a struct used for SSH2_MSG_GLOBAL_REQUEST message +// with "streamlocal-forward@openssh.com"/"cancel-streamlocal-forward@openssh.com" string. +type streamLocalChannelForwardMsg struct { + socketPath string +} + +// ListenUnix is similar to ListenTCP but uses a Unix domain socket. +func (c *Client) ListenUnix(socketPath string) (net.Listener, error) { + c.handleForwardsOnce.Do(c.handleForwards) + m := streamLocalChannelForwardMsg{ + socketPath, + } + // send message + ok, _, err := c.SendRequest("streamlocal-forward@openssh.com", true, Marshal(&m)) + if err != nil { + return nil, err + } + if !ok { + return nil, errors.New("ssh: streamlocal-forward@openssh.com request denied by peer") + } + ch := c.forwards.add(&net.UnixAddr{Name: socketPath, Net: "unix"}) + + return &unixListener{socketPath, c, ch}, nil +} + +func (c *Client) dialStreamLocal(socketPath string) (Channel, error) { + msg := streamLocalChannelOpenDirectMsg{ + socketPath: socketPath, + } + ch, in, err := c.OpenChannel("direct-streamlocal@openssh.com", Marshal(&msg)) + if err != nil { + return nil, err + } + go DiscardRequests(in) + return ch, err +} + +type unixListener struct { + socketPath string + + conn *Client + in <-chan forward +} + +// Accept waits for and returns the next connection to the listener. +func (l *unixListener) Accept() (net.Conn, error) { + s, ok := <-l.in + if !ok { + return nil, io.EOF + } + ch, incoming, err := s.newCh.Accept() + if err != nil { + return nil, err + } + go DiscardRequests(incoming) + + return &chanConn{ + Channel: ch, + laddr: &net.UnixAddr{ + Name: l.socketPath, + Net: "unix", + }, + raddr: &net.UnixAddr{ + Name: "@", + Net: "unix", + }, + }, nil +} + +// Close closes the listener. +func (l *unixListener) Close() error { + // this also closes the listener. + l.conn.forwards.remove(&net.UnixAddr{Name: l.socketPath, Net: "unix"}) + m := streamLocalChannelForwardMsg{ + l.socketPath, + } + ok, _, err := l.conn.SendRequest("cancel-streamlocal-forward@openssh.com", true, Marshal(&m)) + if err == nil && !ok { + err = errors.New("ssh: cancel-streamlocal-forward@openssh.com failed") + } + return err +} + +// Addr returns the listener's network address. +func (l *unixListener) Addr() net.Addr { + return &net.UnixAddr{ + Name: l.socketPath, + Net: "unix", + } +} diff --git a/vendor/golang.org/x/crypto/ssh/tcpip.go b/vendor/golang.org/x/crypto/ssh/tcpip.go new file mode 100644 index 0000000..80d35f5 --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/tcpip.go @@ -0,0 +1,474 @@ +// Copyright 2011 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "errors" + "fmt" + "io" + "math/rand" + "net" + "strconv" + "strings" + "sync" + "time" +) + +// Listen requests the remote peer open a listening socket on +// addr. Incoming connections will be available by calling Accept on +// the returned net.Listener. The listener must be serviced, or the +// SSH connection may hang. +// N must be "tcp", "tcp4", "tcp6", or "unix". +func (c *Client) Listen(n, addr string) (net.Listener, error) { + switch n { + case "tcp", "tcp4", "tcp6": + laddr, err := net.ResolveTCPAddr(n, addr) + if err != nil { + return nil, err + } + return c.ListenTCP(laddr) + case "unix": + return c.ListenUnix(addr) + default: + return nil, fmt.Errorf("ssh: unsupported protocol: %s", n) + } +} + +// Automatic port allocation is broken with OpenSSH before 6.0. See +// also https://bugzilla.mindrot.org/show_bug.cgi?id=2017. In +// particular, OpenSSH 5.9 sends a channelOpenMsg with port number 0, +// rather than the actual port number. This means you can never open +// two different listeners with auto allocated ports. We work around +// this by trying explicit ports until we succeed. + +const openSSHPrefix = "OpenSSH_" + +var portRandomizer = rand.New(rand.NewSource(time.Now().UnixNano())) + +// isBrokenOpenSSHVersion returns true if the given version string +// specifies a version of OpenSSH that is known to have a bug in port +// forwarding. +func isBrokenOpenSSHVersion(versionStr string) bool { + i := strings.Index(versionStr, openSSHPrefix) + if i < 0 { + return false + } + i += len(openSSHPrefix) + j := i + for ; j < len(versionStr); j++ { + if versionStr[j] < '0' || versionStr[j] > '9' { + break + } + } + version, _ := strconv.Atoi(versionStr[i:j]) + return version < 6 +} + +// autoPortListenWorkaround simulates automatic port allocation by +// trying random ports repeatedly. +func (c *Client) autoPortListenWorkaround(laddr *net.TCPAddr) (net.Listener, error) { + var sshListener net.Listener + var err error + const tries = 10 + for i := 0; i < tries; i++ { + addr := *laddr + addr.Port = 1024 + portRandomizer.Intn(60000) + sshListener, err = c.ListenTCP(&addr) + if err == nil { + laddr.Port = addr.Port + return sshListener, err + } + } + return nil, fmt.Errorf("ssh: listen on random port failed after %d tries: %v", tries, err) +} + +// RFC 4254 7.1 +type channelForwardMsg struct { + addr string + rport uint32 +} + +// handleForwards starts goroutines handling forwarded connections. +// It's called on first use by (*Client).ListenTCP to not launch +// goroutines until needed. +func (c *Client) handleForwards() { + go c.forwards.handleChannels(c.HandleChannelOpen("forwarded-tcpip")) + go c.forwards.handleChannels(c.HandleChannelOpen("forwarded-streamlocal@openssh.com")) +} + +// ListenTCP requests the remote peer open a listening socket +// on laddr. Incoming connections will be available by calling +// Accept on the returned net.Listener. +func (c *Client) ListenTCP(laddr *net.TCPAddr) (net.Listener, error) { + c.handleForwardsOnce.Do(c.handleForwards) + if laddr.Port == 0 && isBrokenOpenSSHVersion(string(c.ServerVersion())) { + return c.autoPortListenWorkaround(laddr) + } + + m := channelForwardMsg{ + laddr.IP.String(), + uint32(laddr.Port), + } + // send message + ok, resp, err := c.SendRequest("tcpip-forward", true, Marshal(&m)) + if err != nil { + return nil, err + } + if !ok { + return nil, errors.New("ssh: tcpip-forward request denied by peer") + } + + // If the original port was 0, then the remote side will + // supply a real port number in the response. + if laddr.Port == 0 { + var p struct { + Port uint32 + } + if err := Unmarshal(resp, &p); err != nil { + return nil, err + } + laddr.Port = int(p.Port) + } + + // Register this forward, using the port number we obtained. + ch := c.forwards.add(laddr) + + return &tcpListener{laddr, c, ch}, nil +} + +// forwardList stores a mapping between remote +// forward requests and the tcpListeners. +type forwardList struct { + sync.Mutex + entries []forwardEntry +} + +// forwardEntry represents an established mapping of a laddr on a +// remote ssh server to a channel connected to a tcpListener. +type forwardEntry struct { + laddr net.Addr + c chan forward +} + +// forward represents an incoming forwarded tcpip connection. The +// arguments to add/remove/lookup should be address as specified in +// the original forward-request. +type forward struct { + newCh NewChannel // the ssh client channel underlying this forward + raddr net.Addr // the raddr of the incoming connection +} + +func (l *forwardList) add(addr net.Addr) chan forward { + l.Lock() + defer l.Unlock() + f := forwardEntry{ + laddr: addr, + c: make(chan forward, 1), + } + l.entries = append(l.entries, f) + return f.c +} + +// See RFC 4254, section 7.2 +type forwardedTCPPayload struct { + Addr string + Port uint32 + OriginAddr string + OriginPort uint32 +} + +// parseTCPAddr parses the originating address from the remote into a *net.TCPAddr. +func parseTCPAddr(addr string, port uint32) (*net.TCPAddr, error) { + if port == 0 || port > 65535 { + return nil, fmt.Errorf("ssh: port number out of range: %d", port) + } + ip := net.ParseIP(string(addr)) + if ip == nil { + return nil, fmt.Errorf("ssh: cannot parse IP address %q", addr) + } + return &net.TCPAddr{IP: ip, Port: int(port)}, nil +} + +func (l *forwardList) handleChannels(in <-chan NewChannel) { + for ch := range in { + var ( + laddr net.Addr + raddr net.Addr + err error + ) + switch channelType := ch.ChannelType(); channelType { + case "forwarded-tcpip": + var payload forwardedTCPPayload + if err = Unmarshal(ch.ExtraData(), &payload); err != nil { + ch.Reject(ConnectionFailed, "could not parse forwarded-tcpip payload: "+err.Error()) + continue + } + + // RFC 4254 section 7.2 specifies that incoming + // addresses should list the address, in string + // format. It is implied that this should be an IP + // address, as it would be impossible to connect to it + // otherwise. + laddr, err = parseTCPAddr(payload.Addr, payload.Port) + if err != nil { + ch.Reject(ConnectionFailed, err.Error()) + continue + } + raddr, err = parseTCPAddr(payload.OriginAddr, payload.OriginPort) + if err != nil { + ch.Reject(ConnectionFailed, err.Error()) + continue + } + + case "forwarded-streamlocal@openssh.com": + var payload forwardedStreamLocalPayload + if err = Unmarshal(ch.ExtraData(), &payload); err != nil { + ch.Reject(ConnectionFailed, "could not parse forwarded-streamlocal@openssh.com payload: "+err.Error()) + continue + } + laddr = &net.UnixAddr{ + Name: payload.SocketPath, + Net: "unix", + } + raddr = &net.UnixAddr{ + Name: "@", + Net: "unix", + } + default: + panic(fmt.Errorf("ssh: unknown channel type %s", channelType)) + } + if ok := l.forward(laddr, raddr, ch); !ok { + // Section 7.2, implementations MUST reject spurious incoming + // connections. + ch.Reject(Prohibited, "no forward for address") + continue + } + + } +} + +// remove removes the forward entry, and the channel feeding its +// listener. +func (l *forwardList) remove(addr net.Addr) { + l.Lock() + defer l.Unlock() + for i, f := range l.entries { + if addr.Network() == f.laddr.Network() && addr.String() == f.laddr.String() { + l.entries = append(l.entries[:i], l.entries[i+1:]...) + close(f.c) + return + } + } +} + +// closeAll closes and clears all forwards. +func (l *forwardList) closeAll() { + l.Lock() + defer l.Unlock() + for _, f := range l.entries { + close(f.c) + } + l.entries = nil +} + +func (l *forwardList) forward(laddr, raddr net.Addr, ch NewChannel) bool { + l.Lock() + defer l.Unlock() + for _, f := range l.entries { + if laddr.Network() == f.laddr.Network() && laddr.String() == f.laddr.String() { + f.c <- forward{newCh: ch, raddr: raddr} + return true + } + } + return false +} + +type tcpListener struct { + laddr *net.TCPAddr + + conn *Client + in <-chan forward +} + +// Accept waits for and returns the next connection to the listener. +func (l *tcpListener) Accept() (net.Conn, error) { + s, ok := <-l.in + if !ok { + return nil, io.EOF + } + ch, incoming, err := s.newCh.Accept() + if err != nil { + return nil, err + } + go DiscardRequests(incoming) + + return &chanConn{ + Channel: ch, + laddr: l.laddr, + raddr: s.raddr, + }, nil +} + +// Close closes the listener. +func (l *tcpListener) Close() error { + m := channelForwardMsg{ + l.laddr.IP.String(), + uint32(l.laddr.Port), + } + + // this also closes the listener. + l.conn.forwards.remove(l.laddr) + ok, _, err := l.conn.SendRequest("cancel-tcpip-forward", true, Marshal(&m)) + if err == nil && !ok { + err = errors.New("ssh: cancel-tcpip-forward failed") + } + return err +} + +// Addr returns the listener's network address. +func (l *tcpListener) Addr() net.Addr { + return l.laddr +} + +// Dial initiates a connection to the addr from the remote host. +// The resulting connection has a zero LocalAddr() and RemoteAddr(). +func (c *Client) Dial(n, addr string) (net.Conn, error) { + var ch Channel + switch n { + case "tcp", "tcp4", "tcp6": + // Parse the address into host and numeric port. + host, portString, err := net.SplitHostPort(addr) + if err != nil { + return nil, err + } + port, err := strconv.ParseUint(portString, 10, 16) + if err != nil { + return nil, err + } + ch, err = c.dial(net.IPv4zero.String(), 0, host, int(port)) + if err != nil { + return nil, err + } + // Use a zero address for local and remote address. + zeroAddr := &net.TCPAddr{ + IP: net.IPv4zero, + Port: 0, + } + return &chanConn{ + Channel: ch, + laddr: zeroAddr, + raddr: zeroAddr, + }, nil + case "unix": + var err error + ch, err = c.dialStreamLocal(addr) + if err != nil { + return nil, err + } + return &chanConn{ + Channel: ch, + laddr: &net.UnixAddr{ + Name: "@", + Net: "unix", + }, + raddr: &net.UnixAddr{ + Name: addr, + Net: "unix", + }, + }, nil + default: + return nil, fmt.Errorf("ssh: unsupported protocol: %s", n) + } +} + +// DialTCP connects to the remote address raddr on the network net, +// which must be "tcp", "tcp4", or "tcp6". If laddr is not nil, it is used +// as the local address for the connection. +func (c *Client) DialTCP(n string, laddr, raddr *net.TCPAddr) (net.Conn, error) { + if laddr == nil { + laddr = &net.TCPAddr{ + IP: net.IPv4zero, + Port: 0, + } + } + ch, err := c.dial(laddr.IP.String(), laddr.Port, raddr.IP.String(), raddr.Port) + if err != nil { + return nil, err + } + return &chanConn{ + Channel: ch, + laddr: laddr, + raddr: raddr, + }, nil +} + +// RFC 4254 7.2 +type channelOpenDirectMsg struct { + raddr string + rport uint32 + laddr string + lport uint32 +} + +func (c *Client) dial(laddr string, lport int, raddr string, rport int) (Channel, error) { + msg := channelOpenDirectMsg{ + raddr: raddr, + rport: uint32(rport), + laddr: laddr, + lport: uint32(lport), + } + ch, in, err := c.OpenChannel("direct-tcpip", Marshal(&msg)) + if err != nil { + return nil, err + } + go DiscardRequests(in) + return ch, err +} + +type tcpChan struct { + Channel // the backing channel +} + +// chanConn fulfills the net.Conn interface without +// the tcpChan having to hold laddr or raddr directly. +type chanConn struct { + Channel + laddr, raddr net.Addr +} + +// LocalAddr returns the local network address. +func (t *chanConn) LocalAddr() net.Addr { + return t.laddr +} + +// RemoteAddr returns the remote network address. +func (t *chanConn) RemoteAddr() net.Addr { + return t.raddr +} + +// SetDeadline sets the read and write deadlines associated +// with the connection. +func (t *chanConn) SetDeadline(deadline time.Time) error { + if err := t.SetReadDeadline(deadline); err != nil { + return err + } + return t.SetWriteDeadline(deadline) +} + +// SetReadDeadline sets the read deadline. +// A zero value for t means Read will not time out. +// After the deadline, the error from Read will implement net.Error +// with Timeout() == true. +func (t *chanConn) SetReadDeadline(deadline time.Time) error { + // for compatibility with previous version, + // the error message contains "tcpChan" + return errors.New("ssh: tcpChan: deadline not supported") +} + +// SetWriteDeadline exists to satisfy the net.Conn interface +// but is not implemented by this type. It always returns an error. +func (t *chanConn) SetWriteDeadline(deadline time.Time) error { + return errors.New("ssh: tcpChan: deadline not supported") +} diff --git a/vendor/golang.org/x/crypto/ssh/transport.go b/vendor/golang.org/x/crypto/ssh/transport.go new file mode 100644 index 0000000..49ddc2e --- /dev/null +++ b/vendor/golang.org/x/crypto/ssh/transport.go @@ -0,0 +1,353 @@ +// Copyright 2011 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package ssh + +import ( + "bufio" + "bytes" + "errors" + "io" + "log" +) + +// debugTransport if set, will print packet types as they go over the +// wire. No message decoding is done, to minimize the impact on timing. +const debugTransport = false + +const ( + gcmCipherID = "aes128-gcm@openssh.com" + aes128cbcID = "aes128-cbc" + tripledescbcID = "3des-cbc" +) + +// packetConn represents a transport that implements packet based +// operations. +type packetConn interface { + // Encrypt and send a packet of data to the remote peer. + writePacket(packet []byte) error + + // Read a packet from the connection. The read is blocking, + // i.e. if error is nil, then the returned byte slice is + // always non-empty. + readPacket() ([]byte, error) + + // Close closes the write-side of the connection. + Close() error +} + +// transport is the keyingTransport that implements the SSH packet +// protocol. +type transport struct { + reader connectionState + writer connectionState + + bufReader *bufio.Reader + bufWriter *bufio.Writer + rand io.Reader + isClient bool + io.Closer +} + +// packetCipher represents a combination of SSH encryption/MAC +// protocol. A single instance should be used for one direction only. +type packetCipher interface { + // writeCipherPacket encrypts the packet and writes it to w. The + // contents of the packet are generally scrambled. + writeCipherPacket(seqnum uint32, w io.Writer, rand io.Reader, packet []byte) error + + // readCipherPacket reads and decrypts a packet of data. The + // returned packet may be overwritten by future calls of + // readPacket. + readCipherPacket(seqnum uint32, r io.Reader) ([]byte, error) +} + +// connectionState represents one side (read or write) of the +// connection. This is necessary because each direction has its own +// keys, and can even have its own algorithms +type connectionState struct { + packetCipher + seqNum uint32 + dir direction + pendingKeyChange chan packetCipher +} + +// prepareKeyChange sets up key material for a keychange. The key changes in +// both directions are triggered by reading and writing a msgNewKey packet +// respectively. +func (t *transport) prepareKeyChange(algs *algorithms, kexResult *kexResult) error { + ciph, err := newPacketCipher(t.reader.dir, algs.r, kexResult) + if err != nil { + return err + } + t.reader.pendingKeyChange <- ciph + + ciph, err = newPacketCipher(t.writer.dir, algs.w, kexResult) + if err != nil { + return err + } + t.writer.pendingKeyChange <- ciph + + return nil +} + +func (t *transport) printPacket(p []byte, write bool) { + if len(p) == 0 { + return + } + who := "server" + if t.isClient { + who = "client" + } + what := "read" + if write { + what = "write" + } + + log.Println(what, who, p[0]) +} + +// Read and decrypt next packet. +func (t *transport) readPacket() (p []byte, err error) { + for { + p, err = t.reader.readPacket(t.bufReader) + if err != nil { + break + } + if len(p) == 0 || (p[0] != msgIgnore && p[0] != msgDebug) { + break + } + } + if debugTransport { + t.printPacket(p, false) + } + + return p, err +} + +func (s *connectionState) readPacket(r *bufio.Reader) ([]byte, error) { + packet, err := s.packetCipher.readCipherPacket(s.seqNum, r) + s.seqNum++ + if err == nil && len(packet) == 0 { + err = errors.New("ssh: zero length packet") + } + + if len(packet) > 0 { + switch packet[0] { + case msgNewKeys: + select { + case cipher := <-s.pendingKeyChange: + s.packetCipher = cipher + default: + return nil, errors.New("ssh: got bogus newkeys message") + } + + case msgDisconnect: + // Transform a disconnect message into an + // error. Since this is lowest level at which + // we interpret message types, doing it here + // ensures that we don't have to handle it + // elsewhere. + var msg disconnectMsg + if err := Unmarshal(packet, &msg); err != nil { + return nil, err + } + return nil, &msg + } + } + + // The packet may point to an internal buffer, so copy the + // packet out here. + fresh := make([]byte, len(packet)) + copy(fresh, packet) + + return fresh, err +} + +func (t *transport) writePacket(packet []byte) error { + if debugTransport { + t.printPacket(packet, true) + } + return t.writer.writePacket(t.bufWriter, t.rand, packet) +} + +func (s *connectionState) writePacket(w *bufio.Writer, rand io.Reader, packet []byte) error { + changeKeys := len(packet) > 0 && packet[0] == msgNewKeys + + err := s.packetCipher.writeCipherPacket(s.seqNum, w, rand, packet) + if err != nil { + return err + } + if err = w.Flush(); err != nil { + return err + } + s.seqNum++ + if changeKeys { + select { + case cipher := <-s.pendingKeyChange: + s.packetCipher = cipher + default: + panic("ssh: no key material for msgNewKeys") + } + } + return err +} + +func newTransport(rwc io.ReadWriteCloser, rand io.Reader, isClient bool) *transport { + t := &transport{ + bufReader: bufio.NewReader(rwc), + bufWriter: bufio.NewWriter(rwc), + rand: rand, + reader: connectionState{ + packetCipher: &streamPacketCipher{cipher: noneCipher{}}, + pendingKeyChange: make(chan packetCipher, 1), + }, + writer: connectionState{ + packetCipher: &streamPacketCipher{cipher: noneCipher{}}, + pendingKeyChange: make(chan packetCipher, 1), + }, + Closer: rwc, + } + t.isClient = isClient + + if isClient { + t.reader.dir = serverKeys + t.writer.dir = clientKeys + } else { + t.reader.dir = clientKeys + t.writer.dir = serverKeys + } + + return t +} + +type direction struct { + ivTag []byte + keyTag []byte + macKeyTag []byte +} + +var ( + serverKeys = direction{[]byte{'B'}, []byte{'D'}, []byte{'F'}} + clientKeys = direction{[]byte{'A'}, []byte{'C'}, []byte{'E'}} +) + +// setupKeys sets the cipher and MAC keys from kex.K, kex.H and sessionId, as +// described in RFC 4253, section 6.4. direction should either be serverKeys +// (to setup server->client keys) or clientKeys (for client->server keys). +func newPacketCipher(d direction, algs directionAlgorithms, kex *kexResult) (packetCipher, error) { + cipherMode := cipherModes[algs.Cipher] + macMode := macModes[algs.MAC] + + iv := make([]byte, cipherMode.ivSize) + key := make([]byte, cipherMode.keySize) + macKey := make([]byte, macMode.keySize) + + generateKeyMaterial(iv, d.ivTag, kex) + generateKeyMaterial(key, d.keyTag, kex) + generateKeyMaterial(macKey, d.macKeyTag, kex) + + return cipherModes[algs.Cipher].create(key, iv, macKey, algs) +} + +// generateKeyMaterial fills out with key material generated from tag, K, H +// and sessionId, as specified in RFC 4253, section 7.2. +func generateKeyMaterial(out, tag []byte, r *kexResult) { + var digestsSoFar []byte + + h := r.Hash.New() + for len(out) > 0 { + h.Reset() + h.Write(r.K) + h.Write(r.H) + + if len(digestsSoFar) == 0 { + h.Write(tag) + h.Write(r.SessionID) + } else { + h.Write(digestsSoFar) + } + + digest := h.Sum(nil) + n := copy(out, digest) + out = out[n:] + if len(out) > 0 { + digestsSoFar = append(digestsSoFar, digest...) + } + } +} + +const packageVersion = "SSH-2.0-Go" + +// Sends and receives a version line. The versionLine string should +// be US ASCII, start with "SSH-2.0-", and should not include a +// newline. exchangeVersions returns the other side's version line. +func exchangeVersions(rw io.ReadWriter, versionLine []byte) (them []byte, err error) { + // Contrary to the RFC, we do not ignore lines that don't + // start with "SSH-2.0-" to make the library usable with + // nonconforming servers. + for _, c := range versionLine { + // The spec disallows non US-ASCII chars, and + // specifically forbids null chars. + if c < 32 { + return nil, errors.New("ssh: junk character in version line") + } + } + if _, err = rw.Write(append(versionLine, '\r', '\n')); err != nil { + return + } + + them, err = readVersion(rw) + return them, err +} + +// maxVersionStringBytes is the maximum number of bytes that we'll +// accept as a version string. RFC 4253 section 4.2 limits this at 255 +// chars +const maxVersionStringBytes = 255 + +// Read version string as specified by RFC 4253, section 4.2. +func readVersion(r io.Reader) ([]byte, error) { + versionString := make([]byte, 0, 64) + var ok bool + var buf [1]byte + + for length := 0; length < maxVersionStringBytes; length++ { + _, err := io.ReadFull(r, buf[:]) + if err != nil { + return nil, err + } + // The RFC says that the version should be terminated with \r\n + // but several SSH servers actually only send a \n. + if buf[0] == '\n' { + if !bytes.HasPrefix(versionString, []byte("SSH-")) { + // RFC 4253 says we need to ignore all version string lines + // except the one containing the SSH version (provided that + // all the lines do not exceed 255 bytes in total). + versionString = versionString[:0] + continue + } + ok = true + break + } + + // non ASCII chars are disallowed, but we are lenient, + // since Go doesn't use null-terminated strings. + + // The RFC allows a comment after a space, however, + // all of it (version and comments) goes into the + // session hash. + versionString = append(versionString, buf[0]) + } + + if !ok { + return nil, errors.New("ssh: overflow reading version string") + } + + // There might be a '\r' on the end which we should remove. + if len(versionString) > 0 && versionString[len(versionString)-1] == '\r' { + versionString = versionString[:len(versionString)-1] + } + return versionString, nil +} diff --git a/vendor/golang.org/x/sys/AUTHORS b/vendor/golang.org/x/sys/AUTHORS new file mode 100644 index 0000000..15167cd --- /dev/null +++ b/vendor/golang.org/x/sys/AUTHORS @@ -0,0 +1,3 @@ +# This source code refers to The Go Authors for copyright purposes. +# The master list of authors is in the main Go distribution, +# visible at http://tip.golang.org/AUTHORS. diff --git a/vendor/golang.org/x/sys/CONTRIBUTORS b/vendor/golang.org/x/sys/CONTRIBUTORS new file mode 100644 index 0000000..1c4577e --- /dev/null +++ b/vendor/golang.org/x/sys/CONTRIBUTORS @@ -0,0 +1,3 @@ +# This source code was written by the Go contributors. +# The master list of contributors is in the main Go distribution, +# visible at http://tip.golang.org/CONTRIBUTORS. diff --git a/vendor/golang.org/x/sys/LICENSE b/vendor/golang.org/x/sys/LICENSE new file mode 100644 index 0000000..6a66aea --- /dev/null +++ b/vendor/golang.org/x/sys/LICENSE @@ -0,0 +1,27 @@ +Copyright (c) 2009 The Go Authors. All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are +met: + + * Redistributions of source code must retain the above copyright +notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above +copyright notice, this list of conditions and the following disclaimer +in the documentation and/or other materials provided with the +distribution. + * Neither the name of Google Inc. nor the names of its +contributors may be used to endorse or promote products derived from +this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/vendor/golang.org/x/sys/PATENTS b/vendor/golang.org/x/sys/PATENTS new file mode 100644 index 0000000..7330990 --- /dev/null +++ b/vendor/golang.org/x/sys/PATENTS @@ -0,0 +1,22 @@ +Additional IP Rights Grant (Patents) + +"This implementation" means the copyrightable works distributed by +Google as part of the Go project. + +Google hereby grants to You a perpetual, worldwide, non-exclusive, +no-charge, royalty-free, irrevocable (except as stated in this section) +patent license to make, have made, use, offer to sell, sell, import, +transfer and otherwise run, modify and propagate the contents of this +implementation of Go, where such license applies only to those patent +claims, both currently owned or controlled by Google and acquired in +the future, licensable by Google that are necessarily infringed by this +implementation of Go. This grant does not include claims that would be +infringed only as a consequence of further modification of this +implementation. If you or your agent or exclusive licensee institute or +order or agree to the institution of patent litigation against any +entity (including a cross-claim or counterclaim in a lawsuit) alleging +that this implementation of Go or any code incorporated within this +implementation of Go constitutes direct or contributory patent +infringement, or inducement of patent infringement, then any patent +rights granted to you under this License for this implementation of Go +shall terminate as of the date such litigation is filed. diff --git a/vendor/golang.org/x/sys/cpu/byteorder.go b/vendor/golang.org/x/sys/cpu/byteorder.go new file mode 100644 index 0000000..da6b9e4 --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/byteorder.go @@ -0,0 +1,30 @@ +// Copyright 2019 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package cpu + +import ( + "encoding/binary" + "runtime" +) + +// hostByteOrder returns binary.LittleEndian on little-endian machines and +// binary.BigEndian on big-endian machines. +func hostByteOrder() binary.ByteOrder { + switch runtime.GOARCH { + case "386", "amd64", "amd64p32", + "arm", "arm64", + "mipsle", "mips64le", "mips64p32le", + "ppc64le", + "riscv", "riscv64": + return binary.LittleEndian + case "armbe", "arm64be", + "mips", "mips64", "mips64p32", + "ppc", "ppc64", + "s390", "s390x", + "sparc", "sparc64": + return binary.BigEndian + } + panic("unknown architecture") +} diff --git a/vendor/golang.org/x/sys/cpu/cpu.go b/vendor/golang.org/x/sys/cpu/cpu.go new file mode 100644 index 0000000..679e78c --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu.go @@ -0,0 +1,126 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// Package cpu implements processor feature detection for +// various CPU architectures. +package cpu + +// Initialized reports whether the CPU features were initialized. +// +// For some GOOS/GOARCH combinations initialization of the CPU features depends +// on reading an operating specific file, e.g. /proc/self/auxv on linux/arm +// Initialized will report false if reading the file fails. +var Initialized bool + +// CacheLinePad is used to pad structs to avoid false sharing. +type CacheLinePad struct{ _ [cacheLineSize]byte } + +// X86 contains the supported CPU features of the +// current X86/AMD64 platform. If the current platform +// is not X86/AMD64 then all feature flags are false. +// +// X86 is padded to avoid false sharing. Further the HasAVX +// and HasAVX2 are only set if the OS supports XMM and YMM +// registers in addition to the CPUID feature bit being set. +var X86 struct { + _ CacheLinePad + HasAES bool // AES hardware implementation (AES NI) + HasADX bool // Multi-precision add-carry instruction extensions + HasAVX bool // Advanced vector extension + HasAVX2 bool // Advanced vector extension 2 + HasBMI1 bool // Bit manipulation instruction set 1 + HasBMI2 bool // Bit manipulation instruction set 2 + HasERMS bool // Enhanced REP for MOVSB and STOSB + HasFMA bool // Fused-multiply-add instructions + HasOSXSAVE bool // OS supports XSAVE/XRESTOR for saving/restoring XMM registers. + HasPCLMULQDQ bool // PCLMULQDQ instruction - most often used for AES-GCM + HasPOPCNT bool // Hamming weight instruction POPCNT. + HasRDRAND bool // RDRAND instruction (on-chip random number generator) + HasRDSEED bool // RDSEED instruction (on-chip random number generator) + HasSSE2 bool // Streaming SIMD extension 2 (always available on amd64) + HasSSE3 bool // Streaming SIMD extension 3 + HasSSSE3 bool // Supplemental streaming SIMD extension 3 + HasSSE41 bool // Streaming SIMD extension 4 and 4.1 + HasSSE42 bool // Streaming SIMD extension 4 and 4.2 + _ CacheLinePad +} + +// ARM64 contains the supported CPU features of the +// current ARMv8(aarch64) platform. If the current platform +// is not arm64 then all feature flags are false. +var ARM64 struct { + _ CacheLinePad + HasFP bool // Floating-point instruction set (always available) + HasASIMD bool // Advanced SIMD (always available) + HasEVTSTRM bool // Event stream support + HasAES bool // AES hardware implementation + HasPMULL bool // Polynomial multiplication instruction set + HasSHA1 bool // SHA1 hardware implementation + HasSHA2 bool // SHA2 hardware implementation + HasCRC32 bool // CRC32 hardware implementation + HasATOMICS bool // Atomic memory operation instruction set + HasFPHP bool // Half precision floating-point instruction set + HasASIMDHP bool // Advanced SIMD half precision instruction set + HasCPUID bool // CPUID identification scheme registers + HasASIMDRDM bool // Rounding double multiply add/subtract instruction set + HasJSCVT bool // Javascript conversion from floating-point to integer + HasFCMA bool // Floating-point multiplication and addition of complex numbers + HasLRCPC bool // Release Consistent processor consistent support + HasDCPOP bool // Persistent memory support + HasSHA3 bool // SHA3 hardware implementation + HasSM3 bool // SM3 hardware implementation + HasSM4 bool // SM4 hardware implementation + HasASIMDDP bool // Advanced SIMD double precision instruction set + HasSHA512 bool // SHA512 hardware implementation + HasSVE bool // Scalable Vector Extensions + HasASIMDFHM bool // Advanced SIMD multiplication FP16 to FP32 + _ CacheLinePad +} + +// PPC64 contains the supported CPU features of the current ppc64/ppc64le platforms. +// If the current platform is not ppc64/ppc64le then all feature flags are false. +// +// For ppc64/ppc64le, it is safe to check only for ISA level starting on ISA v3.00, +// since there are no optional categories. There are some exceptions that also +// require kernel support to work (DARN, SCV), so there are feature bits for +// those as well. The minimum processor requirement is POWER8 (ISA 2.07). +// The struct is padded to avoid false sharing. +var PPC64 struct { + _ CacheLinePad + HasDARN bool // Hardware random number generator (requires kernel enablement) + HasSCV bool // Syscall vectored (requires kernel enablement) + IsPOWER8 bool // ISA v2.07 (POWER8) + IsPOWER9 bool // ISA v3.00 (POWER9) + _ CacheLinePad +} + +// S390X contains the supported CPU features of the current IBM Z +// (s390x) platform. If the current platform is not IBM Z then all +// feature flags are false. +// +// S390X is padded to avoid false sharing. Further HasVX is only set +// if the OS supports vector registers in addition to the STFLE +// feature bit being set. +var S390X struct { + _ CacheLinePad + HasZARCH bool // z/Architecture mode is active [mandatory] + HasSTFLE bool // store facility list extended + HasLDISP bool // long (20-bit) displacements + HasEIMM bool // 32-bit immediates + HasDFP bool // decimal floating point + HasETF3EH bool // ETF-3 enhanced + HasMSA bool // message security assist (CPACF) + HasAES bool // KM-AES{128,192,256} functions + HasAESCBC bool // KMC-AES{128,192,256} functions + HasAESCTR bool // KMCTR-AES{128,192,256} functions + HasAESGCM bool // KMA-GCM-AES{128,192,256} functions + HasGHASH bool // KIMD-GHASH function + HasSHA1 bool // K{I,L}MD-SHA-1 functions + HasSHA256 bool // K{I,L}MD-SHA-256 functions + HasSHA512 bool // K{I,L}MD-SHA-512 functions + HasSHA3 bool // K{I,L}MD-SHA3-{224,256,384,512} and K{I,L}MD-SHAKE-{128,256} functions + HasVX bool // vector facility + HasVXE bool // vector-enhancements facility 1 + _ CacheLinePad +} diff --git a/vendor/golang.org/x/sys/cpu/cpu_aix_ppc64.go b/vendor/golang.org/x/sys/cpu/cpu_aix_ppc64.go new file mode 100644 index 0000000..d8c26a0 --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_aix_ppc64.go @@ -0,0 +1,30 @@ +// Copyright 2019 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build aix,ppc64 + +package cpu + +import "golang.org/x/sys/unix" + +const cacheLineSize = 128 + +const ( + // getsystemcfg constants + _SC_IMPL = 2 + _IMPL_POWER8 = 0x10000 + _IMPL_POWER9 = 0x20000 +) + +func init() { + impl := unix.Getsystemcfg(_SC_IMPL) + if impl&_IMPL_POWER8 != 0 { + PPC64.IsPOWER8 = true + } + if impl&_IMPL_POWER9 != 0 { + PPC64.IsPOWER9 = true + } + + Initialized = true +} diff --git a/vendor/golang.org/x/sys/cpu/cpu_arm.go b/vendor/golang.org/x/sys/cpu/cpu_arm.go new file mode 100644 index 0000000..7f2348b --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_arm.go @@ -0,0 +1,9 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package cpu + +const cacheLineSize = 32 + +func doinit() {} diff --git a/vendor/golang.org/x/sys/cpu/cpu_gc_s390x.go b/vendor/golang.org/x/sys/cpu/cpu_gc_s390x.go new file mode 100644 index 0000000..568bcd0 --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_gc_s390x.go @@ -0,0 +1,21 @@ +// Copyright 2019 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build !gccgo + +package cpu + +// haveAsmFunctions reports whether the other functions in this file can +// be safely called. +func haveAsmFunctions() bool { return true } + +// The following feature detection functions are defined in cpu_s390x.s. +// They are likely to be expensive to call so the results should be cached. +func stfle() facilityList +func kmQuery() queryResult +func kmcQuery() queryResult +func kmctrQuery() queryResult +func kmaQuery() queryResult +func kimdQuery() queryResult +func klmdQuery() queryResult diff --git a/vendor/golang.org/x/sys/cpu/cpu_gc_x86.go b/vendor/golang.org/x/sys/cpu/cpu_gc_x86.go new file mode 100644 index 0000000..f7cb469 --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_gc_x86.go @@ -0,0 +1,16 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build 386 amd64 amd64p32 +// +build !gccgo + +package cpu + +// cpuid is implemented in cpu_x86.s for gc compiler +// and in cpu_gccgo.c for gccgo. +func cpuid(eaxArg, ecxArg uint32) (eax, ebx, ecx, edx uint32) + +// xgetbv with ecx = 0 is implemented in cpu_x86.s for gc compiler +// and in cpu_gccgo.c for gccgo. +func xgetbv() (eax, edx uint32) diff --git a/vendor/golang.org/x/sys/cpu/cpu_gccgo.c b/vendor/golang.org/x/sys/cpu/cpu_gccgo.c new file mode 100644 index 0000000..e363c7d --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_gccgo.c @@ -0,0 +1,43 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build 386 amd64 amd64p32 +// +build gccgo + +#include +#include + +// Need to wrap __get_cpuid_count because it's declared as static. +int +gccgoGetCpuidCount(uint32_t leaf, uint32_t subleaf, + uint32_t *eax, uint32_t *ebx, + uint32_t *ecx, uint32_t *edx) +{ + return __get_cpuid_count(leaf, subleaf, eax, ebx, ecx, edx); +} + +// xgetbv reads the contents of an XCR (Extended Control Register) +// specified in the ECX register into registers EDX:EAX. +// Currently, the only supported value for XCR is 0. +// +// TODO: Replace with a better alternative: +// +// #include +// +// #pragma GCC target("xsave") +// +// void gccgoXgetbv(uint32_t *eax, uint32_t *edx) { +// unsigned long long x = _xgetbv(0); +// *eax = x & 0xffffffff; +// *edx = (x >> 32) & 0xffffffff; +// } +// +// Note that _xgetbv is defined starting with GCC 8. +void +gccgoXgetbv(uint32_t *eax, uint32_t *edx) +{ + __asm(" xorl %%ecx, %%ecx\n" + " xgetbv" + : "=a"(*eax), "=d"(*edx)); +} diff --git a/vendor/golang.org/x/sys/cpu/cpu_gccgo.go b/vendor/golang.org/x/sys/cpu/cpu_gccgo.go new file mode 100644 index 0000000..ba49b91 --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_gccgo.go @@ -0,0 +1,26 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build 386 amd64 amd64p32 +// +build gccgo + +package cpu + +//extern gccgoGetCpuidCount +func gccgoGetCpuidCount(eaxArg, ecxArg uint32, eax, ebx, ecx, edx *uint32) + +func cpuid(eaxArg, ecxArg uint32) (eax, ebx, ecx, edx uint32) { + var a, b, c, d uint32 + gccgoGetCpuidCount(eaxArg, ecxArg, &a, &b, &c, &d) + return a, b, c, d +} + +//extern gccgoXgetbv +func gccgoXgetbv(eax, edx *uint32) + +func xgetbv() (eax, edx uint32) { + var a, d uint32 + gccgoXgetbv(&a, &d) + return a, d +} diff --git a/vendor/golang.org/x/sys/cpu/cpu_gccgo_s390x.go b/vendor/golang.org/x/sys/cpu/cpu_gccgo_s390x.go new file mode 100644 index 0000000..aa986f7 --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_gccgo_s390x.go @@ -0,0 +1,22 @@ +// Copyright 2019 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build gccgo + +package cpu + +// haveAsmFunctions reports whether the other functions in this file can +// be safely called. +func haveAsmFunctions() bool { return false } + +// TODO(mundaym): the following feature detection functions are currently +// stubs. See https://golang.org/cl/162887 for how to fix this. +// They are likely to be expensive to call so the results should be cached. +func stfle() facilityList { panic("not implemented for gccgo") } +func kmQuery() queryResult { panic("not implemented for gccgo") } +func kmcQuery() queryResult { panic("not implemented for gccgo") } +func kmctrQuery() queryResult { panic("not implemented for gccgo") } +func kmaQuery() queryResult { panic("not implemented for gccgo") } +func kimdQuery() queryResult { panic("not implemented for gccgo") } +func klmdQuery() queryResult { panic("not implemented for gccgo") } diff --git a/vendor/golang.org/x/sys/cpu/cpu_linux.go b/vendor/golang.org/x/sys/cpu/cpu_linux.go new file mode 100644 index 0000000..76b5f50 --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_linux.go @@ -0,0 +1,59 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +//+build !amd64,!amd64p32,!386 + +package cpu + +import ( + "io/ioutil" +) + +const ( + _AT_HWCAP = 16 + _AT_HWCAP2 = 26 + + procAuxv = "/proc/self/auxv" + + uintSize = int(32 << (^uint(0) >> 63)) +) + +// For those platforms don't have a 'cpuid' equivalent we use HWCAP/HWCAP2 +// These are initialized in cpu_$GOARCH.go +// and should not be changed after they are initialized. +var hwCap uint +var hwCap2 uint + +func init() { + buf, err := ioutil.ReadFile(procAuxv) + if err != nil { + // e.g. on android /proc/self/auxv is not accessible, so silently + // ignore the error and leave Initialized = false + return + } + + bo := hostByteOrder() + for len(buf) >= 2*(uintSize/8) { + var tag, val uint + switch uintSize { + case 32: + tag = uint(bo.Uint32(buf[0:])) + val = uint(bo.Uint32(buf[4:])) + buf = buf[8:] + case 64: + tag = uint(bo.Uint64(buf[0:])) + val = uint(bo.Uint64(buf[8:])) + buf = buf[16:] + } + switch tag { + case _AT_HWCAP: + hwCap = val + case _AT_HWCAP2: + hwCap2 = val + } + } + doinit() + + Initialized = true +} diff --git a/vendor/golang.org/x/sys/cpu/cpu_linux_arm64.go b/vendor/golang.org/x/sys/cpu/cpu_linux_arm64.go new file mode 100644 index 0000000..fa7fb1b --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_linux_arm64.go @@ -0,0 +1,67 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package cpu + +const cacheLineSize = 64 + +// HWCAP/HWCAP2 bits. These are exposed by Linux. +const ( + hwcap_FP = 1 << 0 + hwcap_ASIMD = 1 << 1 + hwcap_EVTSTRM = 1 << 2 + hwcap_AES = 1 << 3 + hwcap_PMULL = 1 << 4 + hwcap_SHA1 = 1 << 5 + hwcap_SHA2 = 1 << 6 + hwcap_CRC32 = 1 << 7 + hwcap_ATOMICS = 1 << 8 + hwcap_FPHP = 1 << 9 + hwcap_ASIMDHP = 1 << 10 + hwcap_CPUID = 1 << 11 + hwcap_ASIMDRDM = 1 << 12 + hwcap_JSCVT = 1 << 13 + hwcap_FCMA = 1 << 14 + hwcap_LRCPC = 1 << 15 + hwcap_DCPOP = 1 << 16 + hwcap_SHA3 = 1 << 17 + hwcap_SM3 = 1 << 18 + hwcap_SM4 = 1 << 19 + hwcap_ASIMDDP = 1 << 20 + hwcap_SHA512 = 1 << 21 + hwcap_SVE = 1 << 22 + hwcap_ASIMDFHM = 1 << 23 +) + +func doinit() { + // HWCAP feature bits + ARM64.HasFP = isSet(hwCap, hwcap_FP) + ARM64.HasASIMD = isSet(hwCap, hwcap_ASIMD) + ARM64.HasEVTSTRM = isSet(hwCap, hwcap_EVTSTRM) + ARM64.HasAES = isSet(hwCap, hwcap_AES) + ARM64.HasPMULL = isSet(hwCap, hwcap_PMULL) + ARM64.HasSHA1 = isSet(hwCap, hwcap_SHA1) + ARM64.HasSHA2 = isSet(hwCap, hwcap_SHA2) + ARM64.HasCRC32 = isSet(hwCap, hwcap_CRC32) + ARM64.HasATOMICS = isSet(hwCap, hwcap_ATOMICS) + ARM64.HasFPHP = isSet(hwCap, hwcap_FPHP) + ARM64.HasASIMDHP = isSet(hwCap, hwcap_ASIMDHP) + ARM64.HasCPUID = isSet(hwCap, hwcap_CPUID) + ARM64.HasASIMDRDM = isSet(hwCap, hwcap_ASIMDRDM) + ARM64.HasJSCVT = isSet(hwCap, hwcap_JSCVT) + ARM64.HasFCMA = isSet(hwCap, hwcap_FCMA) + ARM64.HasLRCPC = isSet(hwCap, hwcap_LRCPC) + ARM64.HasDCPOP = isSet(hwCap, hwcap_DCPOP) + ARM64.HasSHA3 = isSet(hwCap, hwcap_SHA3) + ARM64.HasSM3 = isSet(hwCap, hwcap_SM3) + ARM64.HasSM4 = isSet(hwCap, hwcap_SM4) + ARM64.HasASIMDDP = isSet(hwCap, hwcap_ASIMDDP) + ARM64.HasSHA512 = isSet(hwCap, hwcap_SHA512) + ARM64.HasSVE = isSet(hwCap, hwcap_SVE) + ARM64.HasASIMDFHM = isSet(hwCap, hwcap_ASIMDFHM) +} + +func isSet(hwc uint, value uint) bool { + return hwc&value != 0 +} diff --git a/vendor/golang.org/x/sys/cpu/cpu_linux_ppc64x.go b/vendor/golang.org/x/sys/cpu/cpu_linux_ppc64x.go new file mode 100644 index 0000000..6c8d975 --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_linux_ppc64x.go @@ -0,0 +1,33 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build linux +// +build ppc64 ppc64le + +package cpu + +const cacheLineSize = 128 + +// HWCAP/HWCAP2 bits. These are exposed by the kernel. +const ( + // ISA Level + _PPC_FEATURE2_ARCH_2_07 = 0x80000000 + _PPC_FEATURE2_ARCH_3_00 = 0x00800000 + + // CPU features + _PPC_FEATURE2_DARN = 0x00200000 + _PPC_FEATURE2_SCV = 0x00100000 +) + +func doinit() { + // HWCAP2 feature bits + PPC64.IsPOWER8 = isSet(hwCap2, _PPC_FEATURE2_ARCH_2_07) + PPC64.IsPOWER9 = isSet(hwCap2, _PPC_FEATURE2_ARCH_3_00) + PPC64.HasDARN = isSet(hwCap2, _PPC_FEATURE2_DARN) + PPC64.HasSCV = isSet(hwCap2, _PPC_FEATURE2_SCV) +} + +func isSet(hwc uint, value uint) bool { + return hwc&value != 0 +} diff --git a/vendor/golang.org/x/sys/cpu/cpu_linux_s390x.go b/vendor/golang.org/x/sys/cpu/cpu_linux_s390x.go new file mode 100644 index 0000000..d579eae --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_linux_s390x.go @@ -0,0 +1,161 @@ +// Copyright 2019 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package cpu + +const cacheLineSize = 256 + +const ( + // bit mask values from /usr/include/bits/hwcap.h + hwcap_ZARCH = 2 + hwcap_STFLE = 4 + hwcap_MSA = 8 + hwcap_LDISP = 16 + hwcap_EIMM = 32 + hwcap_DFP = 64 + hwcap_ETF3EH = 256 + hwcap_VX = 2048 + hwcap_VXE = 8192 +) + +// bitIsSet reports whether the bit at index is set. The bit index +// is in big endian order, so bit index 0 is the leftmost bit. +func bitIsSet(bits []uint64, index uint) bool { + return bits[index/64]&((1<<63)>>(index%64)) != 0 +} + +// function is the code for the named cryptographic function. +type function uint8 + +const ( + // KM{,A,C,CTR} function codes + aes128 function = 18 // AES-128 + aes192 function = 19 // AES-192 + aes256 function = 20 // AES-256 + + // K{I,L}MD function codes + sha1 function = 1 // SHA-1 + sha256 function = 2 // SHA-256 + sha512 function = 3 // SHA-512 + sha3_224 function = 32 // SHA3-224 + sha3_256 function = 33 // SHA3-256 + sha3_384 function = 34 // SHA3-384 + sha3_512 function = 35 // SHA3-512 + shake128 function = 36 // SHAKE-128 + shake256 function = 37 // SHAKE-256 + + // KLMD function codes + ghash function = 65 // GHASH +) + +// queryResult contains the result of a Query function +// call. Bits are numbered in big endian order so the +// leftmost bit (the MSB) is at index 0. +type queryResult struct { + bits [2]uint64 +} + +// Has reports whether the given functions are present. +func (q *queryResult) Has(fns ...function) bool { + if len(fns) == 0 { + panic("no function codes provided") + } + for _, f := range fns { + if !bitIsSet(q.bits[:], uint(f)) { + return false + } + } + return true +} + +// facility is a bit index for the named facility. +type facility uint8 + +const ( + // cryptography facilities + msa4 facility = 77 // message-security-assist extension 4 + msa8 facility = 146 // message-security-assist extension 8 +) + +// facilityList contains the result of an STFLE call. +// Bits are numbered in big endian order so the +// leftmost bit (the MSB) is at index 0. +type facilityList struct { + bits [4]uint64 +} + +// Has reports whether the given facilities are present. +func (s *facilityList) Has(fs ...facility) bool { + if len(fs) == 0 { + panic("no facility bits provided") + } + for _, f := range fs { + if !bitIsSet(s.bits[:], uint(f)) { + return false + } + } + return true +} + +func doinit() { + // test HWCAP bit vector + has := func(featureMask uint) bool { + return hwCap&featureMask == featureMask + } + + // mandatory + S390X.HasZARCH = has(hwcap_ZARCH) + + // optional + S390X.HasSTFLE = has(hwcap_STFLE) + S390X.HasLDISP = has(hwcap_LDISP) + S390X.HasEIMM = has(hwcap_EIMM) + S390X.HasETF3EH = has(hwcap_ETF3EH) + S390X.HasDFP = has(hwcap_DFP) + S390X.HasMSA = has(hwcap_MSA) + S390X.HasVX = has(hwcap_VX) + if S390X.HasVX { + S390X.HasVXE = has(hwcap_VXE) + } + + // We need implementations of stfle, km and so on + // to detect cryptographic features. + if !haveAsmFunctions() { + return + } + + // optional cryptographic functions + if S390X.HasMSA { + aes := []function{aes128, aes192, aes256} + + // cipher message + km, kmc := kmQuery(), kmcQuery() + S390X.HasAES = km.Has(aes...) + S390X.HasAESCBC = kmc.Has(aes...) + if S390X.HasSTFLE { + facilities := stfle() + if facilities.Has(msa4) { + kmctr := kmctrQuery() + S390X.HasAESCTR = kmctr.Has(aes...) + } + if facilities.Has(msa8) { + kma := kmaQuery() + S390X.HasAESGCM = kma.Has(aes...) + } + } + + // compute message digest + kimd := kimdQuery() // intermediate (no padding) + klmd := klmdQuery() // last (padding) + S390X.HasSHA1 = kimd.Has(sha1) && klmd.Has(sha1) + S390X.HasSHA256 = kimd.Has(sha256) && klmd.Has(sha256) + S390X.HasSHA512 = kimd.Has(sha512) && klmd.Has(sha512) + S390X.HasGHASH = kimd.Has(ghash) // KLMD-GHASH does not exist + sha3 := []function{ + sha3_224, sha3_256, sha3_384, sha3_512, + shake128, shake256, + } + S390X.HasSHA3 = kimd.Has(sha3...) && klmd.Has(sha3...) + } +} diff --git a/vendor/golang.org/x/sys/cpu/cpu_mips64x.go b/vendor/golang.org/x/sys/cpu/cpu_mips64x.go new file mode 100644 index 0000000..f55e0c8 --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_mips64x.go @@ -0,0 +1,11 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build mips64 mips64le + +package cpu + +const cacheLineSize = 32 + +func doinit() {} diff --git a/vendor/golang.org/x/sys/cpu/cpu_mipsx.go b/vendor/golang.org/x/sys/cpu/cpu_mipsx.go new file mode 100644 index 0000000..cda87b1 --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_mipsx.go @@ -0,0 +1,11 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build mips mipsle + +package cpu + +const cacheLineSize = 32 + +func doinit() {} diff --git a/vendor/golang.org/x/sys/cpu/cpu_other_arm64.go b/vendor/golang.org/x/sys/cpu/cpu_other_arm64.go new file mode 100644 index 0000000..dd1e76d --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_other_arm64.go @@ -0,0 +1,11 @@ +// Copyright 2019 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build !linux,arm64 + +package cpu + +const cacheLineSize = 64 + +func doinit() {} diff --git a/vendor/golang.org/x/sys/cpu/cpu_s390x.s b/vendor/golang.org/x/sys/cpu/cpu_s390x.s new file mode 100644 index 0000000..e5037d9 --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_s390x.s @@ -0,0 +1,57 @@ +// Copyright 2019 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build !gccgo + +#include "textflag.h" + +// func stfle() facilityList +TEXT ·stfle(SB), NOSPLIT|NOFRAME, $0-32 + MOVD $ret+0(FP), R1 + MOVD $3, R0 // last doubleword index to store + XC $32, (R1), (R1) // clear 4 doublewords (32 bytes) + WORD $0xb2b01000 // store facility list extended (STFLE) + RET + +// func kmQuery() queryResult +TEXT ·kmQuery(SB), NOSPLIT|NOFRAME, $0-16 + MOVD $0, R0 // set function code to 0 (KM-Query) + MOVD $ret+0(FP), R1 // address of 16-byte return value + WORD $0xB92E0024 // cipher message (KM) + RET + +// func kmcQuery() queryResult +TEXT ·kmcQuery(SB), NOSPLIT|NOFRAME, $0-16 + MOVD $0, R0 // set function code to 0 (KMC-Query) + MOVD $ret+0(FP), R1 // address of 16-byte return value + WORD $0xB92F0024 // cipher message with chaining (KMC) + RET + +// func kmctrQuery() queryResult +TEXT ·kmctrQuery(SB), NOSPLIT|NOFRAME, $0-16 + MOVD $0, R0 // set function code to 0 (KMCTR-Query) + MOVD $ret+0(FP), R1 // address of 16-byte return value + WORD $0xB92D4024 // cipher message with counter (KMCTR) + RET + +// func kmaQuery() queryResult +TEXT ·kmaQuery(SB), NOSPLIT|NOFRAME, $0-16 + MOVD $0, R0 // set function code to 0 (KMA-Query) + MOVD $ret+0(FP), R1 // address of 16-byte return value + WORD $0xb9296024 // cipher message with authentication (KMA) + RET + +// func kimdQuery() queryResult +TEXT ·kimdQuery(SB), NOSPLIT|NOFRAME, $0-16 + MOVD $0, R0 // set function code to 0 (KIMD-Query) + MOVD $ret+0(FP), R1 // address of 16-byte return value + WORD $0xB93E0024 // compute intermediate message digest (KIMD) + RET + +// func klmdQuery() queryResult +TEXT ·klmdQuery(SB), NOSPLIT|NOFRAME, $0-16 + MOVD $0, R0 // set function code to 0 (KLMD-Query) + MOVD $ret+0(FP), R1 // address of 16-byte return value + WORD $0xB93F0024 // compute last message digest (KLMD) + RET diff --git a/vendor/golang.org/x/sys/cpu/cpu_wasm.go b/vendor/golang.org/x/sys/cpu/cpu_wasm.go new file mode 100644 index 0000000..bd9bbda --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_wasm.go @@ -0,0 +1,15 @@ +// Copyright 2019 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build wasm + +package cpu + +// We're compiling the cpu package for an unknown (software-abstracted) CPU. +// Make CacheLinePad an empty struct and hope that the usual struct alignment +// rules are good enough. + +const cacheLineSize = 0 + +func doinit() {} diff --git a/vendor/golang.org/x/sys/cpu/cpu_x86.go b/vendor/golang.org/x/sys/cpu/cpu_x86.go new file mode 100644 index 0000000..d70d317 --- /dev/null +++ b/vendor/golang.org/x/sys/cpu/cpu_x86.go @@ -0,0 +1,59 @@ +// Copyright 2018 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build 386 amd64 amd64p32 + +package cpu + +const cacheLineSize = 64 + +func init() { + Initialized = true + + maxID, _, _, _ := cpuid(0, 0) + + if maxID < 1 { + return + } + + _, _, ecx1, edx1 := cpuid(1, 0) + X86.HasSSE2 = isSet(26, edx1) + + X86.HasSSE3 = isSet(0, ecx1) + X86.HasPCLMULQDQ = isSet(1, ecx1) + X86.HasSSSE3 = isSet(9, ecx1) + X86.HasFMA = isSet(12, ecx1) + X86.HasSSE41 = isSet(19, ecx1) + X86.HasSSE42 = isSet(20, ecx1) + X86.HasPOPCNT = isSet(23, ecx1) + X86.HasAES = isSet(25, ecx1) + X86.HasOSXSAVE = isSet(27, ecx1) + X86.HasRDRAND = isSet(30, ecx1) + + osSupportsAVX := false + // For XGETBV, OSXSAVE bit is required and sufficient. + if X86.HasOSXSAVE { + eax, _ := xgetbv() + // Check if XMM and YMM registers have OS support. + osSupportsAVX = isSet(1, eax) && isSet(2, eax) + } + + X86.HasAVX = isSet(28, ecx1) && osSupportsAVX + + if maxID < 7 { + return + } + + _, ebx7, _, _ := cpuid(7, 0) + X86.HasBMI1 = isSet(3, ebx7) + X86.HasAVX2 = isSet(5, ebx7) && osSupportsAVX + X86.HasBMI2 = isSet(8, ebx7) + X86.HasERMS = isSet(9, ebx7) + X86.HasRDSEED = isSet(18, ebx7) + X86.HasADX = isSet(19, ebx7) +} + +func isSet(bitpos uint, value uint32) bool { + return value&(1<