[Support]: Upgrade from 0.12.1-367D724

[GWW88]

Describe the problem you are having

Hi guys, (apologies for a simple question)

Could someone point me in the right direction.
I have a really good set up of 0.12.1-367D724. I love it and it is was working great.

I am having some real trouble updating it to v0.13.

I have tried doing,
docker compose pull
docker compose up -d
(along with a complete rebuild that I couldn't get working)

When it reloads I just get the spinning/loading wheel. I have tried for hours but just can't solve it.

Version

0.12.1-367D724

Frigate config file

version: '3.9'

services:

  frigate:
    container_name: frigate
    privileged: true
    restart: unless-stopped
    image: ghcr.io/blakeblackshear/frigate:stable
    shm_size: "512mb" # update for your cameras based on calculation above
    devices:
      - /dev/bus/usb:/dev/bus/usb
      - /dev/dri/renderD128 # for intel hwaccel, needs to be updated for your hardware
    volumes:
      - /etc/localtime:/etc/localtime:ro
      - /opt/frigate/config:/config:rw
      - /CCTV:/media/frigate/clips:rw
      - /CCTV:/media/frigate/recordings:rw
      - type: tmpfs # Optional: 1GB of memory, reduces SSD/SD Card wear
        target: /tmp/cache
        tmpfs:
          size: 1000000000
    ports:
      - "5000:5000"
      - "1935:1935" # RTMP feeds
      - "8555:8555/tcp" # WebRTC over tcp
      - "8555:8555/udp" # WebRTC over udp
    environment:
      FRIGATE_RTSP_PASSWORD: "XXXXXX"



mqtt:
  enabled: True
  host: 192.168.1.200
  port: 1883
  topic_prefix: frigate
  user: 'gw'
  password: 'XXXXXX'
  stats_interval: 30

ffmpeg:
  output_args:
    record: preset-record-generic-audio-aac
#  hwaccel_args: preset-vaapi
#  hwaccel_args: preset-intel-qsv-h264

detectors:
  coral:
    type: edgetpu
    device: usb

#Global Object Settings
objects:
  track:
    - person
    - dog
    - car
    - bicycle
    - motorcycle
  filters:
    car:
      min_area: 750
      max_area: 100000
    person:
      min_area: 550
    dog:
      min_area: 300

go2rtc:  # <------ Check stream in VLC player if it works there all good.
  streams:
    driveway:
      - rtsp://admin:[email protected]:554/Streaming/Channels/101
    driveway_sub:
      - rtsp://admin:[email protected]:554/Streaming/Channels/103
    front_garden:
      - rtsp://admin:[email protected]:554/Streaming/Channels/101
    front_garden_sub:
      - rtsp://admin:[email protected]:554/Streaming/Channels/102
    back:
      - rtsp://admin:[email protected]:554/Streaming/Channels/101
    back_sub:
      - rtsp://admin:[email protected]:554/Streaming/Channels/102
    lounge:
      - rtsp://admin:[email protected]:554/Streaming/Channels/101
    lounge_sub:
      - rtsp://admin:[email protected]:554/Streaming/Channels/102
    porch:
      - rtsp://admin:[email protected]:554/Streaming/Channels/101
      - "ffmpeg:porch#audio=opus" # <- copy of the stream which transcodes audio to opus
    porch_sub:
      - rtsp://admin:[email protected]:554/Streaming/Channels/102
      - "ffmpeg:porch_sub#audio=opus" # <- copy of the stream which transcodes audio to opus

cameras:
  Driveway:
    ffmpeg:
      inputs:
        # High Resolution Stream
        - path: rtsp://127.0.0.1:8554/driveway?video
#          input_args: preset-rtsp-restream
          roles:
            - record
        # Low Resolution Stream
        - path: rtsp://127.0.0.1:8554/driveway_sub?video #&audio=aac
#          input_args: preset-rtsp-restream
          roles:
            - detect
            - rtmp
    detect:
      stationary:
        interval: 0
        threshold: 25     # number of frames an object needs to remain relatively still before it is considered stationary.
      width: 1280
      height: 720
      fps: 15
    snapshots:
      enabled: True
    record:
      enabled: True
      retain:
        days: 2
        mode: motion
      events:
        pre_capture: 2
        post_capture: 2
        retain:
          default: 5
          mode: motion
          objects: 
            person: 7
            car: 7
            dog: 2
    zones:
      zone_driveway_road:
        coordinates: 0,288,1280,389,1280,0,0,0,0,130,135,197
        objects:
        - person
        - dog
        - car
        filters:
          person:
            min_score: 0.40
            threshold: 0.50
          car:
            threshold: 0.55
          dog:
            threshold: 0.55
      zone_driveway_entry:
        coordinates: 1280,499,1280,392,95,301,0,387
        objects:
        - person
        - dog
        - car
        filters:
          person:
            min_score: 0.40
            threshold: 0.50
          car:
            threshold: 0.55
          dog:
            threshold: 0.55
      zone_driveway_main:
        coordinates: 0,380,0,720,1280,720,1280,507
        objects:
        - person
        - dog
        - car
        filters:
          person:
            min_score: 0.4
            threshold: 0.50
          car:
            threshold: 0.55
          dog:
            threshold: 0.55
    motion:
        mask:
          - 0,104,0,364,69,353,108,279,128,234,136,195,93,129,54,135

Relevant log output

Nil

FFprobe output from your camera

Nil

Frigate stats

Nil

Operating system

Debian

Install method

Docker Compose

Coral version

USB

Network connection

Wired

Camera make and model

Hikvision

Any other information that may be helpful

No response

[banthungprong]

Start without -d option and you will see the logs on the console. This might give a clue.

[GWW88]

Thankyou, that did give me a hint that something was wrong in the config file, which was stopping it. I have just started with a dummy file and will move everything over from the 0.12x that is running well progressively.

cheers

[java007md]

@GWW88 - If you could update your progress, that would be appreciated. I'm still on 0.12.1-367D724 in docker and am considering the upgrade as well. Any fixes you made to get to a stable and operational system would be great.

[GWW88]

@java007md I have my Frigate running in a promox container. I restored a backup then,

• replaced the config with the dummy one to get it running, https://docs.frigate.video/guides/getting_started
• did the docker compose pull & docker compose up -d to upgrade
• that worked fine to get the 0.13.2 running just fine (did a container backup there if I happened to break something)
• I then slowly replaced the config with my one and adjusted where needed.
  Took a few hours and there is probably an easier was but it worked for me.

[java007md]

Thank you @GWW88. My config is quite basic and seems to be working fine with no changes. The only modification I made was to the config volume mapping (mapping the config containing directories vs. the config.yml file). Will watch it over the coming days.