[Camera Support]: Reolink Wifi doorbell configuration - not working #14967
Replies: 4 comments 10 replies
-
|
Check out the documentation. You should be using |
Beta Was this translation helpful? Give feedback.
-
|
@hawkeye217 followed your guidance and changed the input urls. Errors have changed and read: The errors have changed. |
Beta Was this translation helpful? Give feedback.
-
|
the lowercase |
Beta Was this translation helpful? Give feedback.
-
|
@PrplHaz4 Nice catch!. BUt unfortunately, did not solve the issue. Logs show: Your help is appreciated. Next thoughts? |
Beta Was this translation helpful? Give feedback.
-
|
@agoose77 - I originally had the camera IPs in the confg file set to what the camera's were identified via my router: 192.168.0.xx. however, #14967 (comment) suggested I should change to 127.0.0.1:8554. Which I did change. I did not change the actual camera IP. Seems like they should be what the camera's IP actually is: 192.168..x. vice 127.0.0.x, etc. And what I think you are saying or asking is - are the IPs in the config and the camera the same ....that answer would be no. @NickM-27 mqtt:
enabled: false
ffmpeg:
hwaccel_args: preset-rpi-64-h264 #Enable Hardware Acceleration
#go2rtc:
# streams:
# Front_Door:
# - "ffmpeg:http://reolink_ip/flv?port=1935&app=bcs&stream=channel0_main.bcs&user=username&password=password#video=copy#audio=copy#audio=opus"
# - rtsp://reolink_ip/Preview_01_sub
# Front_Door_sub:
# - "ffmpeg:http://reolink_ip/flv?port=1935&app=bcs&stream=channel0_ext.bcs&user=username&password=password"
cameras:
# Backdoor:
# ffmpeg:
# inputs:
# - path: rtsp://192.168.0.54:8555/rtsp
# roles:
# - detect
Front_Door:
ffmpeg:
inputs:
- path: rtsp://127.0.0.1:8554/Front_Door #The Stream you want to monitor
input_args: preset-rtsp-restream
roles:
- record
- path: rtsp://127.0.0.1:8554/Front_Door_sub
input_args: preset-rtsp-restream
roles:
- detect
detect:
enabled: false # Detection is disabled
width: 1280 # The Cameras resolution
height: 720 # The Cameras resolution
#version: 0.14 version: 0.14
version: 0.14 |
Beta Was this translation helpful? Give feedback.
-
|
Sorry about the bold lettering. |
Beta Was this translation helpful? Give feedback.
-
|
if you are going to be using 127.0.0.1:8554 then you must be using go2rtc |
Beta Was this translation helpful? Give feedback.
-
|
@NickM-27 as I read to understand you comment #14967 (reply in thread), did I provide the correct config file? |
Beta Was this translation helpful? Give feedback.
-
|
@dwdonnelly there shouldn't be a correlation between the go2rtc IP and the camera IP - the idea is that you set the camera IP in go2rtc, and then hit a single endpoint on the go2rtc server to locate the stream by name |
Beta Was this translation helpful? Give feedback.
-
|
@agoose77, @NickM-27, @PrplHaz4, @hawkeye217—Happy holidays to all. Well, I decided to wipe the thumb drive on the Raspberry Pi 4 and restart with a very basic configuration. Unfortunately, I still have no success getting the Reolink Wi-Fi doorbell to show up in Frigate on the Raspberry Pi 4. I did not setup the Go2rtc, as I wanted to get the video working first. I set the unique Reolink camera settings: On, fluency first and Interframe Space 1x. I have installed/compiled/tested ffmpeg satisfactorily. I can view the front doorbell camera through Home Assistant. I can access the camera through the web browser using 192.168.0.42 and associated UID/PWD. My file structure is as follows: /opt/stacks/frigate (contains storage directory and config.yml and docker-compose.yml) I verified the RTSP port on the camera is set to 8554. What am I missing here? Your help is appreciated. My docker-compose.yml file:
And my config.yml file:
ffmpeg: cameras: Error logs:
|
Beta Was this translation helpful? Give feedback.
-
Describe the problem you are having
Not able to properly configure Reolink WiFi Doorbell to record on Frigate installed on Rpi 4 (8GB, no coral).
The rtsp connection is refuseds rtsp://192.168.0.42:8555/Front_Door_sub: Connection refused
Front_Door: Unable to read frames from ffmpeg process.
Front_Door: ffmpeg process is not running. exiting capture thread...
Have verified ffmpeg is installed and does operate. Test converted a file.
I am able to on my separate Odroid Home Assistant system to integrate Reolink and view the Reolink WiFi Doorbell.
Version
0.14.1-f4f3cfa
What browser(s) are you using?
Chromium Version 130.0.6723.91 (Official Build) built on Debian GNU/Linux 12 (bookworm) (64-bit)
Frigate config file
Relevant Frigate log output
Relevant go2rtc log output
FFprobe output from your camera
Frigate stats
Not sure how to obtainOperating system
Other Linux
Install method
Docker Compose
Object Detector
CPU (no coral)
Network connection
Wired
Camera make and model
Reolink Wifi (not-POE)
Screenshots of the Frigate UI's System metrics pages
General Stats - Frigate.pdf
Any other information that may be helpful
I am testing to learn the process to install and configure Frigate to work with the reolink and other type camera(s) prior to working to install on my Home Assistant system. Your help to this very novice is appreciate.
Beta Was this translation helpful? Give feedback.
All reactions