Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Dynamic speed adjustment based on volumetric flow limits #1

Open
bob-anthony opened this issue Apr 20, 2022 · 2 comments
Open

Dynamic speed adjustment based on volumetric flow limits #1

bob-anthony opened this issue Apr 20, 2022 · 2 comments
Assignees
@bob-anthony
Labels
enhancement New feature or request

Comments

@bob-anthony
Copy link
Owner

bob-anthony commented Apr 20, 2022 •
edited
Loading

Monitoring this feature request Ultimaker/Cura#5248
Some additional information on using material profiles Ultimaker/Cura#4334

Very good blog post regarding line width, layer height, and print speed.

Would like to dynamically adjust print speed, max feed rate, based on the volumetric limits for the material and nozzle size.
@bob-anthony bob-anthony added the enhancement New feature or request label Apr 20, 2022
@bob-anthony bob-anthony self-assigned this Apr 20, 2022
@bob-anthony
Copy link
Owner Author

This feature has been implemented in smartavionics fork.

https://github.com/smartavionics/Cura/releases/tag/4.20.9

smartavionics/Cura@81a6fdd
smartavionics/CuraEngine@9ffaff2
smartavionics/CuraEngine@68f23b0
smartavionics/CuraEngine@b8a8acc

@bob-anthony
Copy link
Owner Author

Note for myself. This settings can be modified in the material file using

<cura:setting key="material_max_mm3_per_sec">8.0</cura:setting>

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@bob-anthony bob-anthony

Labels
enhancement New feature or request
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@bob-anthony