-
Notifications
You must be signed in to change notification settings - Fork 63
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Cannot use host ~/.ssh/config
#118
Comments
With some care in configuring rmview this should already work. |
"I could not connect to the reMarkable at rm" It does not appear to read the
"I could not connect to the reMarkable at remarkable" It does not appear to search for a host with hostname My
This works fine with Using the hostname |
Just to confirm: if you put the IP of the remarkable in the |
I haven't tried putting the IP in, because the IP is dynamically assigned by the network router. It doesn't make sense to hardcode an IP. That's what a hostname is for. Same way you browse to
I haven't been able to get the non-dockerised version of this app to work at all;
This is after manually installing the required Python libraries. Despite them being installed on the system (packages Between the dockerized version expecting a different configuration path ( |
I understand this, but my question was: how is the
that has probably to do with your Anaconda configuration. People used rmview with Anaconda before but they had to follow some other installation flow. I've never used Anaconda so I cannot really help you there. Under 'releases' you can also find brebuilt binaries. I am planning to upload there new ones for the latest version soon.
I was just trying to help you with your problem |
I am also getting similar I started screenshare first and SSH connection looks fine. Running with Debian 11, python 3.9 log below (my user name replaced with
p.s. the VNC server will not be installed on the rM tablet yet as the SSH connection works fine from the host. |
Interestingly, I have tried on same network with precompiled app (for Mac) and that works. I guess maybe there is a build/library issue... |
The bundle uses BTW, Autoinstall does nothing if the backend is |
@bordaigorl that change definitely helps. I can now connect and get the first image from the rM. However updates fail to load Here is the log (note that I changed to key based auth in the config). In the log shown, I tried:
Restarting
|
p.s. also tried p.p.s. I noticed that even though the lines are not updating, the pen cursor is properly showing, so streaming data must be getting through, just looks like drawn lines not updating |
Hmmm, strange, I removed |
@develop-Greenant thanks for looking into this! I see you are on RM2.
|
I am not using any framebuffer hacks as far as I am aware (have never installed I have uninstalled the tolec packages i had installed (including Unfortunately looks like that didn't fix the issue. Same problem, initial screen shown, live cursor is shown but no updates to the image as changes are made. |
I have an SSH config setup for
reMarkable
in my~/.ssh/config
. I looked through the source code and it seems like there may be partial support for this, but I couldn't get it to work.I want to be able to do
rmview
and have it read the same config I would normally use to ssh into the reMarkable. Instead I have a headache with a separate private key? I don't use a keyfile for SSH, I use the ssh-agent, which is provided a key by gpg-agent, which reads my PGP smart card.The ssh-agent, and
~/.ssh/config
exist for a reason... please enable support to just call thessh
command on the machine and let it worry about hostname resolution and authentication etc.The text was updated successfully, but these errors were encountered: