public-vpc.yml

AWSTemplateFormatVersion: '2010-09-09'
Description: A stack for deploying containerized applications in AWS Fargate.
             This stack runs containers in a public VPC subnet, and includes a
             public facing load balancer to register the services in.
Mappings:
  # Hard values for the subnet masks. These masks define
  # the range of internal IP addresses that can be assigned.
  # The VPC can have all IP's from 10.0.0.0 to 10.0.255.255
  # There are two subnets which cover the ranges:
  #
  # 10.0.0.0 - 10.0.0.255
  # 10.0.1.0 - 10.0.1.255
  #
  # If you need more IP addresses (perhaps you have so many
  # instances that you run out) then you can customize these
  # ranges to add more
  SubnetConfig:
    VPC:
      CIDR: '10.0.0.0/16'
    PublicOne:
      CIDR: '10.0.0.0/24'
    PublicTwo:
      CIDR: '10.0.1.0/24'
Resources:
  # VPC in which containers will be networked.
  # It has two public subnets
  # We distribute the subnets across the first two available subnets
  # for the region, for high availability.
  VPC:
    Type: AWS::EC2::VPC
    Properties:
      EnableDnsSupport: true
      EnableDnsHostnames: true
      CidrBlock: !FindInMap ['SubnetConfig', 'VPC', 'CIDR']

  # Two public subnets, where containers can have public IP addresses
  PublicSubnetOne:
    Type: AWS::EC2::Subnet
    Properties:
      AvailabilityZone:
         Fn::Select:
         - 0
         - Fn::GetAZs: {Ref: 'AWS::Region'}
      VpcId: !Ref 'VPC'
      CidrBlock: !FindInMap ['SubnetConfig', 'PublicOne', 'CIDR']
      MapPublicIpOnLaunch: true
  PublicSubnetTwo:
    Type: AWS::EC2::Subnet
    Properties:
      AvailabilityZone:
         Fn::Select:
         - 1
         - Fn::GetAZs: {Ref: 'AWS::Region'}
      VpcId: !Ref 'VPC'
      CidrBlock: !FindInMap ['SubnetConfig', 'PublicTwo', 'CIDR']
      MapPublicIpOnLaunch: true

  # Setup networking resources for the public subnets. Containers
  # in the public subnets have public IP addresses and the routing table
  # sends network traffic via the internet gateway.
  InternetGateway:
    Type: AWS::EC2::InternetGateway
  GatewayAttachement:
    Type: AWS::EC2::VPCGatewayAttachment
    Properties:
      VpcId: !Ref 'VPC'
      InternetGatewayId: !Ref 'InternetGateway'
  PublicRouteTable:
    Type: AWS::EC2::RouteTable
    Properties:
      VpcId: !Ref 'VPC'
  PublicRoute:
    Type: AWS::EC2::Route
    DependsOn: GatewayAttachement
    Properties:
      RouteTableId: !Ref 'PublicRouteTable'
      DestinationCidrBlock: '0.0.0.0/0'
      GatewayId: !Ref 'InternetGateway'
  PublicSubnetOneRouteTableAssociation:
    Type: AWS::EC2::SubnetRouteTableAssociation
    Properties:
      SubnetId: !Ref PublicSubnetOne
      RouteTableId: !Ref PublicRouteTable
  PublicSubnetTwoRouteTableAssociation:
    Type: AWS::EC2::SubnetRouteTableAssociation
    Properties:
      SubnetId: !Ref PublicSubnetTwo
      RouteTableId: !Ref PublicRouteTable

  # ECS Resources
  ECSCluster:
    Type: AWS::ECS::Cluster

  # A security group for the containers we will run in Fargate.
  # Two rules, allowing network traffic from a public facing load
  # balancer and from other members of the security group.
  #
  # Remove any of the following ingress rules that are not needed.
  # If you want to make direct requests to a container using its
  # public IP address you'll need to add a security group rule
  # to allow traffic from all IP addresses.
  FargateContainerSecurityGroup:
    Type: AWS::EC2::SecurityGroup
    Properties:
      GroupDescription: Access to the Fargate containers
      VpcId: !Ref 'VPC'
  EcsSecurityGroupIngressFromPublicALB:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      Description: Ingress from the public ALB
      GroupId: !Ref 'FargateContainerSecurityGroup'
      IpProtocol: -1
      SourceSecurityGroupId: !Ref 'PublicLoadBalancerSG'
  EcsSecurityGroupIngressFromSelf:
    Type: AWS::EC2::SecurityGroupIngress
    Properties:
      Description: Ingress from other containers in the same security group
      GroupId: !Ref 'FargateContainerSecurityGroup'
      IpProtocol: -1
      SourceSecurityGroupId: !Ref 'FargateContainerSecurityGroup'

  # Load balancers for getting traffic to containers.
  # This sample template creates one load balancer:
  #
  # - One public load balancer, hosted in public subnets that is accessible
  #   to the public, and is intended to route traffic to one or more public
  #   facing services.

  # A public facing load balancer, this is used for accepting traffic from the public
  # internet and directing it to public facing microservices
  PublicLoadBalancerSG:
    Type: AWS::EC2::SecurityGroup
    Properties:
      GroupDescription: Access to the public facing load balancer
      VpcId: !Ref 'VPC'
      SecurityGroupIngress:
          # Allow access to ALB from anywhere on the internet
          - CidrIp: 0.0.0.0/0
            IpProtocol: -1
  PublicLoadBalancer:
    Type: AWS::ElasticLoadBalancingV2::LoadBalancer
    Properties:
      Scheme: internet-facing
      LoadBalancerAttributes:
      - Key: idle_timeout.timeout_seconds
        Value: '30'
      Subnets:
        # The load balancer is placed into the public subnets, so that traffic
        # from the internet can reach the load balancer directly via the internet gateway
        - !Ref PublicSubnetOne
        - !Ref PublicSubnetTwo
      SecurityGroups: [!Ref 'PublicLoadBalancerSG']
  # A dummy target group is used to setup the ALB to just drop traffic
  # initially, before any real service target groups have been added.
  DummyTargetGroupPublic:
    Type: AWS::ElasticLoadBalancingV2::TargetGroup
    Properties:
      HealthCheckIntervalSeconds: 6
      HealthCheckPath: /
      HealthCheckProtocol: HTTP
      HealthCheckTimeoutSeconds: 5
      HealthyThresholdCount: 2
      Name: !Join ['-', [!Ref 'AWS::StackName', 'drop-1']]
      Port: 80
      Protocol: HTTP
      UnhealthyThresholdCount: 2
      VpcId: !Ref 'VPC'
  PublicLoadBalancerListener:
    Type: AWS::ElasticLoadBalancingV2::Listener
    DependsOn:
      - PublicLoadBalancer
    Properties:
      DefaultActions:
        - TargetGroupArn: !Ref 'DummyTargetGroupPublic'
          Type: 'forward'
      LoadBalancerArn: !Ref 'PublicLoadBalancer'
      Port: 80
      Protocol: HTTP

  # This is an IAM role which authorizes ECS to manage resources on your
  # account on your behalf, such as updating your load balancer with the
  # details of where your containers are, so that traffic can reach your
  # containers.
  ECSRole:
    Type: AWS::IAM::Role
    Properties:
      AssumeRolePolicyDocument:
        Statement:
        - Effect: Allow
          Principal:
            Service: [ecs.amazonaws.com]
          Action: ['sts:AssumeRole']
      Path: /
      Policies:
      - PolicyName: ecs-service
        PolicyDocument:
          Statement:
          - Effect: Allow
            Action:
              # Rules which allow ECS to attach network interfaces to instances
              # on your behalf in order for awsvpc networking mode to work right
              - 'ec2:AttachNetworkInterface'
              - 'ec2:CreateNetworkInterface'
              - 'ec2:CreateNetworkInterfacePermission'
              - 'ec2:DeleteNetworkInterface'
              - 'ec2:DeleteNetworkInterfacePermission'
              - 'ec2:Describe*'
              - 'ec2:DetachNetworkInterface'

              # Rules which allow ECS to update load balancers on your behalf
              # with the information sabout how to send traffic to your containers
              - 'elasticloadbalancing:DeregisterInstancesFromLoadBalancer'
              - 'elasticloadbalancing:DeregisterTargets'
              - 'elasticloadbalancing:Describe*'
              - 'elasticloadbalancing:RegisterInstancesWithLoadBalancer'
              - 'elasticloadbalancing:RegisterTargets'
            Resource: '*'

  # This is a role which is used by the ECS tasks themselves.
  ECSTaskExecutionRole:
    Type: AWS::IAM::Role
    Properties:
      AssumeRolePolicyDocument:
        Statement:
        - Effect: Allow
          Principal:
            Service: [ecs-tasks.amazonaws.com]
          Action: ['sts:AssumeRole']
      Path: /
      Policies:
        - PolicyName: AmazonECSTaskExecutionRolePolicy
          PolicyDocument:
            Statement:
            - Effect: Allow
              Action:
                # Allow the ECS Tasks to download images from ECR
                - 'ecr:GetAuthorizationToken'
                - 'ecr:BatchCheckLayerAvailability'
                - 'ecr:GetDownloadUrlForLayer'
                - 'ecr:BatchGetImage'

                # Allow the ECS tasks to upload logs to CloudWatch
                - 'logs:CreateLogStream'
                - 'logs:PutLogEvents'
              Resource: '*'

# These are the values output by the CloudFormation template. Be careful
# about changing any of them, because of them are exported with specific
# names so that the other task related CF templates can use them.
Outputs:
  ClusterName:
    Description: The name of the ECS cluster
    Value: !Ref 'ECSCluster'
    Export:
      Name: !Join [ ':', [ !Ref 'AWS::StackName', 'ClusterName' ] ]
  ExternalUrl:
    Description: The url of the external load balancer
    Value: !Join ['', ['http://', !GetAtt 'PublicLoadBalancer.DNSName']]
    Export:
      Name: !Join [ ':', [ !Ref 'AWS::StackName', 'ExternalUrl' ] ]
  ECSRole:
    Description: The ARN of the ECS role
    Value: !GetAtt 'ECSRole.Arn'
    Export:
      Name: !Join [ ':', [ !Ref 'AWS::StackName', 'ECSRole' ] ]
  ECSTaskExecutionRole:
    Description: The ARN of the ECS role
    Value: !GetAtt 'ECSTaskExecutionRole.Arn'
    Export:
      Name: !Join [ ':', [ !Ref 'AWS::StackName', 'ECSTaskExecutionRole' ] ]
  PublicListener:
    Description: The ARN of the public load balancer's Listener
    Value: !Ref PublicLoadBalancerListener
    Export:
      Name: !Join [ ':', [ !Ref 'AWS::StackName', 'PublicListener' ] ]
  VPCId:
    Description: The ID of the VPC that this stack is deployed in
    Value: !Ref 'VPC'
    Export:
      Name: !Join [ ':', [ !Ref 'AWS::StackName', 'VPCId' ] ]
  PublicSubnetOne:
    Description: Public subnet one
    Value: !Ref 'PublicSubnetOne'
    Export:
      Name: !Join [ ':', [ !Ref 'AWS::StackName', 'PublicSubnetOne' ] ]
  PublicSubnetTwo:
    Description: Public subnet two
    Value: !Ref 'PublicSubnetTwo'
    Export:
      Name: !Join [ ':', [ !Ref 'AWS::StackName', 'PublicSubnetTwo' ] ]
  FargateContainerSecurityGroup:
    Description: A security group used to allow Fargate containers to receive traffic
    Value: !Ref 'FargateContainerSecurityGroup'
    Export:
      Name: !Join [ ':', [ !Ref 'AWS::StackName', 'FargateContainerSecurityGroup' ] ]