tests.yml

name: Tests
on:
  schedule:
    - cron: '0 0 * * 0' # Weekly on Sunday at 00:00 UTC
  push:
    branches:
      - main
  pull_request:

permissions:
  contents: read

concurrency:
  group: ${{ github.workflow }}-${{ github.ref }}
  cancel-in-progress: true

defaults:
  run:
    # Make sure bash is always invoked with `-eo pipefail`
    # https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions#jobsjob_idstepsshell
    shell: bash

jobs:
  code-tests:
    name: Code
    runs-on: ubuntu-22.04
    steps:
      - name: Checkout
        uses: actions/checkout@v4
        with:
          # A non-shallow clone is needed for the Differential ShellCheck
          fetch-depth: 0

      - name: Install Go
        uses: actions/setup-go@v5
        with:
          go-version: 1.22.x

      - name: Check compatibility with min Go version
        run: |
          set -eux
          GOMIN="$(sed -n 's/^GOMIN=\([0-9.]\+\)$/\1/p' Makefile)"
          go mod tidy -go="${GOMIN}"

      - name: Dependency Review
        uses: actions/dependency-review-action@v4
        if: github.event_name == 'pull_request'

      - id: ShellCheck
        name: Differential ShellCheck
        uses: redhat-plumbers-in-action/differential-shellcheck@v5
        with:
          token: ${{ secrets.GITHUB_TOKEN }}
          strict-check-on-push: true
        if: github.event_name == 'pull_request'

      - name: Upload artifact with ShellCheck defects in SARIF format
        uses: actions/upload-artifact@v4
        with:
          name: Differential ShellCheck SARIF
          path: ${{ steps.ShellCheck.outputs.sarif }}
        if: github.event_name == 'pull_request'

      - name: Install dependencies
        run: |
          sudo add-apt-repository ppa:dqlite/dev -y --no-update
          sudo apt-get update
          sudo apt-get install --no-install-recommends -y libdqlite-dev pkg-config

      - name: Build
        run: make

      - name: Run static analysis
        run: make check-static

      - name: Unit tests
        run: make check-unit

  system-tests:
    env:
      DEBUG: "1"
      SKIP_VM_LAUNCH: "1"
      SNAPSHOT_RESTORE: "1"
    name: System
    runs-on: GitHubMicrocloud
    strategy:
      fail-fast: false
      matrix:
        go: ["1.22.x"]
        suite:
          - "add"
          - "instances"
          - "basic"
          - "recover"
          - "interactive"
          - "mismatch"
          - "preseed"

    steps:
      - name: Performance tuning
        run: |
          set -eux
          # optimize ext4 FSes for performance, not reliability
          for fs in $(findmnt --noheading --type ext4 --list --uniq | awk '{print $1}'); do
            # nombcache and data=writeback cannot be changed on remount
            sudo mount -o remount,noatime,barrier=0,commit=6000 "${fs}" || true
          done

          # disable dpkg from calling sync()
          echo "force-unsafe-io" | sudo tee /etc/dpkg/dpkg.cfg.d/force-unsafe-io

      - name: Reclaim some space
        run: |
          set -eux

          sudo snap remove lxd --purge
          # Purge older snap revisions that are disabled/superseded by newer revisions of the same snap
          snap list --all | while read -r name _ rev _ _ notes _; do
            [[ "${notes}" =~ disabled$ ]] && sudo snap remove "${name}" --revision "${rev}" --purge
          done || true

          # This was inspired from https://github.com/easimon/maximize-build-space
          df -h /
          # dotnet
          sudo rm -rf /usr/share/dotnet
          # android
          sudo rm -rf /usr/local/lib/android
          # haskell
          sudo rm -rf /opt/ghc
          df -h /

      - name: Reclaim some memory
        run: |
          set -eux

          free -mt
          sudo systemctl stop dpkg-db-backup.timer e2scrub_all.timer fstrim.timer logrotate.timer man-db.timer motd-news.timer phpsessionclean.timer update-notifier-download.timer update-notifier-motd.timer
          sudo systemctl stop iscsid.socket multipathd.socket
          sudo systemctl stop cron.service irqbalance.service mono-xsp4.service multipathd.service networkd-dispatcher.service php8.1-fpm.service
          free -mt

      - name: Remove docker
        run: |
          set -eux
          sudo apt-get autopurge -y containerd.io moby-containerd docker docker-ce podman uidmap
          sudo ip link delete docker0
          sudo nft flush ruleset

      - name: Checkout
        uses: actions/checkout@v4

      - name: Install Go (${{ matrix.go }})
        uses: actions/setup-go@v5
        with:
          go-version: ${{ matrix.go }}

      - name: Install dependencies
        run: |
          sudo add-apt-repository ppa:dqlite/dev -y --no-update
          sudo apt-get update
          sudo apt-get install --no-install-recommends -y libdqlite-dev pkg-config

      - name: Build
        run: |
          set -eux

          make

          # Binaries to sideload
          export MICROCLOUD_DEBUG_PATH=~/go/bin/microcloud
          export MICROCLOUDD_DEBUG_PATH=~/go/bin/microcloudd

          # strip debug binaries
          strip -s "${MICROCLOUD_DEBUG_PATH}" "${MICROCLOUDD_DEBUG_PATH}"

          echo "MICROCLOUD_DEBUG_PATH=${MICROCLOUD_DEBUG_PATH}"   >> "${GITHUB_ENV}"
          echo "MICROCLOUDD_DEBUG_PATH=${MICROCLOUDD_DEBUG_PATH}" >> "${GITHUB_ENV}"

      - name: "Free up the ephemeral disk"
        run: |
          set -eux

          if ! mountpoint --quiet /mnt; then
            echo "INFO: no ephemeral disk mounted on /mnt"
            mount
            exit 0
          fi

          # If the rootfs and the ephemeral part are on the same physical disk, giving the whole
          # disk to microceph would wipe our rootfs. Since it is pretty rare for GitHub Action
          # runners to have a single disk, we immediately bail rather than trying to gracefully
          # handle it. Once snapd releases with https://github.com/snapcore/snapd/pull/13150,
          # we will be able to stop worrying about that special case.
          if [ "$(stat -c '%d' /)" = "$(stat -c '%d' /mnt)" ]; then
            echo "FAIL: rootfs and ephemeral part on the same disk, aborting"
            lsblk
            blkid
            sudo fdisk -l
            exit 1
          fi

          # Free-up the ephemeral disk to use it as storage device for LXD.
          sudo swapoff /mnt/swapfile
          ephemeral_disk="$(findmnt --noheadings --output SOURCE --target /mnt | sed 's/[0-9]\+$//')"
          sudo umount /mnt
          sudo wipefs -a "${ephemeral_disk}"
          export TEST_STORAGE_SOURCE="${ephemeral_disk}"

          echo "TEST_STORAGE_SOURCE=${TEST_STORAGE_SOURCE}" >> "${GITHUB_ENV}"

      - name: "Setup host LXD"
        run: |
          set -eux
          sudo snap install lxd --channel latest/edge || sudo snap refresh lxd --channel latest/edge
          sudo lxd init --auto

      - name: Build MicroOVN from commit 803dc03ea847d214941330c74cc0ae0027550dc0
        run: |
          set -eux

          sudo snap refresh
          sudo snap set lxd daemon.group=adm
          sudo snap install snapcraft --classic
          git clone https://github.com/canonical/microovn
          cd microovn
          git checkout 803dc03ea847d214941330c74cc0ae0027550dc0
          # disable golangci-lint as the latest version is not happy with this commit.
          sed -e "s/golangci-lint run/# &/" -i snap/snapcraft.yaml
          make microovn.snap
          export MICROOVN_SNAP_PATH="$(readlink -f microovn.snap)"
          echo "MICROOVN_SNAP_PATH=${MICROOVN_SNAP_PATH}"   >> "${GITHUB_ENV}"
          cd -

      - name: "Prepare for system tests"
        run: |
          set -eux
          chmod +x ~
          cd test
          sudo --preserve-env=DEBUG,GITHUB_ACTIONS,MICROCLOUD_DEBUG_PATH,MICROCLOUDD_DEBUG_PATH,SKIP_VM_LAUNCH,SNAPSHOT_RESTORE,TEST_STORAGE_SOURCE,TESTBED_READY,MICROOVN_SNAP_PATH ./main.sh setup
          echo "TESTBED_READY=1" >> "${GITHUB_ENV}"

      - name: "Run system tests (${{ matrix.go }}, ${{ matrix.suite }})"
        run: |
          set -eux
          chmod +x ~
          cd test
          sudo --preserve-env=DEBUG,GITHUB_ACTIONS,MICROCLOUD_DEBUG_PATH,MICROCLOUDD_DEBUG_PATH,SKIP_VM_LAUNCH,SNAPSHOT_RESTORE,TEST_STORAGE_SOURCE,TESTBED_READY ./main.sh ${{ matrix.suite }}

  documentation-checks:
    uses: canonical/documentation-workflows/.github/workflows/documentation-checks.yaml@main
    with:
      working-directory: './doc'
      makefile: 'Makefile'

  snap:
    name: Trigger snap edge build
    runs-on: ubuntu-22.04
    needs: [code-tests, system-tests, documentation-checks]
    if: ${{ github.repository == 'canonical/microcloud' && github.event_name == 'push' && github.actor != 'dependabot[bot]' }}
    steps:
      - name: Checkout code
        uses: actions/checkout@v4

      - name: Setup Launchpad SSH access
        env:
          SSH_AUTH_SOCK: /tmp/ssh_agent.sock
          LAUNCHPAD_LXD_BOT_KEY: ${{ secrets.LAUNCHPAD_LXD_BOT_KEY }}
        run: |
          set -eux
          mkdir -m 0700 -p ~/.ssh/
          ssh-agent -a "${SSH_AUTH_SOCK}" > /dev/null
          ssh-add - <<< "${{ secrets.LAUNCHPAD_LXD_BOT_KEY }}"
          ssh-add -L > ~/.ssh/id_ed25519.pub
          # In ephemeral environments like GitHub Action runners, relying on TOFU isn't providing any security
          # so require the key obtained by `ssh-keyscan` to match the expected hash from https://help.launchpad.net/SSHFingerprints
          ssh-keyscan git.launchpad.net >> ~/.ssh/known_hosts
          ssh-keygen -qlF git.launchpad.net | grep -xF 'git.launchpad.net RSA SHA256:UNOzlP66WpDuEo34Wgs8mewypV0UzqHLsIFoqwe8dYo'

      - name: Install Go (${{ matrix.go }})
        uses: actions/setup-go@v5
        with:
          go-version: 1.22.x

      - name: Trigger Launchpad snap build
        env:
          SSH_AUTH_SOCK: /tmp/ssh_agent.sock
          TARGET: >-
            ${{ fromJson('{
              "main": "latest-edge",
              "stable-5.0": "5.0-edge",
            }')[github.ref_name] }}
        run: |
          set -eux
          git config --global transfer.fsckobjects true
          git config --global user.name "Canonical LXD Bot"
          git config --global user.email "lxd@lists.canonical.com"
          git config --global commit.gpgsign true
          git config --global gpg.format "ssh"
          git config --global user.signingkey ~/.ssh/id_ed25519.pub
          localRev="$(git rev-parse HEAD)"
          GOPROXY=direct go install github.com/canonical/lxd-ci/lxd-snapcraft@latest
          git clone -b "${TARGET}" git+ssh://lxdbot@git.launchpad.net/~canonical-lxd/microcloud ~/microcloud-pkg-snap-lp
          cd ~/microcloud-pkg-snap-lp
          lxd-snapcraft -package microcloud -set-version "git-${localRev:0:7}" -set-source-commit "${localRev}"
          git add --all
          git commit --all --quiet -s --allow-empty -m "Automatic upstream build (${TARGET})" -m "Upstream commit: ${localRev}"
          git show
          git push --quiet