Hand crank Emergency Power Bank
Welcome! 👋
Andy, Jia Woei, Jinghui, Chermaine and Charissa are part of Plan Bee and we are making a prototype of an emergency hand crank power bank in fulfilment of the course PS5888: Making and Tinkering. In this particular repository, it would consists the C & C++ codes of our functions in our power bank for Arduino Uno and ESP32-WROOM-32D respectively. More Information can be found in our blog.
Listed below are the current codes for Plan Bee :
Click to view the table of content
Table of Content
The structure of Plan Bee repository is as such:
Plan Bee
│ README.md
│ LICENSE
│
├─── PCB Design
│ ├─── PCB Main V1
│ ├─── PCB Main V2
│ └─── PCB Main V3
│
├─── For Arduino
│ ├─── INA226 for arduino uno
│ ├─── INA3221 for arduino uno
│ ├─── LED
│ └─── Voltage and Current sensor using ACS712 and potentiometer
│
├─── For ESP32
│ ├─── for ILI9341
│ │ ├─── ILI9341_INA226
│ │ ├─── ILI9341_INA3221
│ │ ├─── graphictestILI9341
│ │ ├─── printextILI9341
│ │ └─── README.md
│ │
│ ├─── for SH1106
│ │ ├─── SH1106 (using INA3221 and general use)
│ │ ├─── SH1106_forUsers (using INA3221 and for users)
│ │ └─── README.md
│ │
│ ├─── for SSD1306
│ │ └─── INA3221_works
│ │
│ └─── intermediate
│ ├─── Temperature
│ └─── switch
│
├─── image
│ ├─── Plan Bee Logo (ALIVE).png
│ ├─── Plan Bee Logo (DEAD).png
│ ├─── bee.jpg
│ └─── pinout.jpg
│
├─── modified libraries
│ ├─── Adafruit_ILI9341
│ └─── TFT_eSPI
│
These are libraries imported:
Currently, we use the following items for the functions:
| Items | Model No. 1 | Model No. 2 | Model No. 3 |
|---|---|---|---|
| Current, Voltage Sensor | INA3221 | INA226 | - |
| Display Screen | SSD1306 | SSH1106 | ILI9341 |
| Temperature Sensor | DS18B20 | - | - |
| Encoder | HW040 | - | - |
| Relay | SRD-05VDC-SL-C | - | - |
| Button | Tactile Push Button | - | - |
- Clone this repository into your working station, key in the following command in CMD(Windows) or Terminal(Mac or Linux).
For Windows/Mac, to save the repository content into a folder in Desktop:
cd Desktop
Followed by
git clone https://github.com/charutomo/Plan-Bee-
For Linux, to save the repository content into a folder in Desktop:
$ ls Desktop
Followed by
$ git clone https://github.com/charutomo/Plan-Bee-
-
Install Arduino IDE(if you haven't) and download the libraries to have the full features.
-
You can start upload code from the repository to test out.
Special thanks to Tony and Qi Jie for their guidance throughout the whole project of Plan Bee.
Please direct your enquiries to [email protected] or under the issues section.
Thank you for your support! 😊