bmp180.ino

#include <Adafruit_Sensor.h>
#include <Adafruit_BMP085_U.h>

/* You should also assign a unique ID to this sensor for use with
   the Adafruit Sensor API so that you can identify this particular
   sensor in any data logs, etc.  To assign a unique ID, simply
   provide an appropriate value in the constructor below (12345
   is used by default in this example).
   
*/
   
Adafruit_BMP085_Unified bmp = Adafruit_BMP085_Unified(10085);

/**************************************************************************/
/*
    Displays some basic information on this sensor from the unified
    sensor API sensor_t type (see Adafruit_Sensor for more information)
*/
/**************************************************************************/
void bmp180_check(void)
{

  if(!bmp.begin())
  {
    /* There was a problem detecting the BMP085 ... check your connections */
    Serial.print("Ooops, no BMP085 detected ... Check your wiring or I2C ADDR!");
    while(1);
  }



  sensor_t sensor;
  bmp.getSensor(&sensor);
  Serial.println("------------------------------------");
  Serial.print  ("Sensor:       "); Serial.println(sensor.name);
  Serial.print  ("Driver Ver:   "); Serial.println(sensor.version);
  Serial.print  ("Unique ID:    "); Serial.println(sensor.sensor_id);
  Serial.print  ("Max Value:    "); Serial.print(sensor.max_value); Serial.println(" hPa");
  Serial.print  ("Min Value:    "); Serial.print(sensor.min_value); Serial.println(" hPa");
  Serial.print  ("Resolution:   "); Serial.print(sensor.resolution); Serial.println(" hPa");  
  Serial.println("------------------------------------");
  Serial.println("");
  delay(500);
}


void pressione() 
{
  /* Get a new sensor event */ 
  sensors_event_t event;
  bmp.getEvent(&event);
  BP = event.pressure;

 
//  /* Display the results (barometric pressure is measure in hPa) */
//  if (event.pressure)
//  {
//    /* Display atmospheric pressue in hPa */
//    Serial.print("Pressure:    ");
//    Serial.print(event.pressure);
//    Serial.println(" hPa");
//
//  }
}