This file contains information about the parts that is not needed for KiCAD but is a reference for designers.
| Manufacturer | Part Number | Connector Type | Reccomended KiCAD Symbol | Mounting orientation | Testing Status |
|---|---|---|---|---|---|
| Cliff | FCR1281 | 3.5mm Mono TS | AudioJack2_Ground_Switch | Horizontal | Untested |
| QuingPu | WQP-PJ301BM | 3.5mm Mono TS | AudioJack2_SwitchT | Vertical | Untested |
| QuingPu | WQP-PJ301CM | 3.5mm Stereo TRS | AudioJack3 | Vertical | Untested |
| QuingPu | WQP-PJ301M-12 | 3.5mm Mono TS | AudioJack2_SwitchT | Vertical | Untested |
| QuingPu | WQP-PJ302M | 3.5mm Mono TS | AudioJack2_SwitchT | Horizontal | Untested |
| QuingPu | WQP-PJ366ST | 3.5mm Stereo TRS | AudioJack2_SwitchT | Vertical | Untested |
| QuingPu | WQP-PJ398SM | 3.5mm Mono TS | AudioJack3 | Vertical | Untested |
| QuingPu | WQP-PJ3410 | 3.5mm Stereo TRS | AudioJack3_SwitchTR | Vertical | Untested |
Testing status is either "Untested", "Print out confirmed" or "PCB Confirmed". Untested is self expanitory, print is that I have printed an image and tested it against the real component and PCB is that I have manufactured and soldered in the real part as a test.
Here is a summary of the contents, please not they may not be the original manufacturers but where I sourced the reference connector.
Common type used on Doepfer and Expert Sleepers
Sheilded connector a little like the PJ398SM, popularised by Earthenvar
Stereo jack
Commonly used side mounting mono jack in Eurorack
Stereo jack in a similar shape to PJ398SM but not exactly the same
AKA Thonkiconn, very commonly used eurorack jack sold by many suppliers like Thonk. 3D model options with Knurled nut, hex nut and no nut.
The original "Thonkiconn" looks a little different (different 3D model) but same footprint as PJ398SM
'NV' jack (Kits by 'NV' on Muffwiggler) Taller vertical mount 3.5mm jack. KiCAD does not have the correct schematic symbol it should be AudioJack3_SwitchT but it does not exist.