Skip to content

Latest commit

 

History

History
158 lines (103 loc) · 8.61 KB

securing-standalone-mode-cluster.md

File metadata and controls

158 lines (103 loc) · 8.61 KB
Raw

Setting Up Security for a Standalone Mode Server

Security in Pravega is off by default. You may start Pravega Standalone mode server with security enabled by modifying the security configuration before launching it.

Depending on how you configure security, either or both of the following occurs:

  1. Client-server and internal communications are encrypted using SSL/TLS
  2. Server authenticates and authorizes client requests

For standalone mode servers, you may enable SSL/TLS, and/ auth (short for Authentication and Authorization). We recommend that you enable both. The subsections below describe how to enable them.

Enabling SSL/TLS and Auth

The configuration parameter singlenode.security.tls.enable determines whether SSL/TLS is enabled in a standalone mode server. Its default value is false, and therefore, SSL/TLS is disabled by default.

Similarly, the configuration parameter singlenode.security.auth.enable determines whether auth is enabled. It is disabled by default as well.

The following steps explain how to enable and configure SSL/TLS and/ auth:

  1. Locate the standalone-config.properties file.

    If you are running standalone mode server from source, you can find it under the /path/to/pravega/config directory.

    If you are running it from the distribution instead, you can find it under the /path/to/pravega-<version>/conf directory.

  2. If enabling SSL/TLS, optionally prepare the certificates and keys for SSL/TLS.

    In the same directory as the standalone-config.properties file, you'll find default/provided PKI material. You may use these material for SSL/TLS.

    If you'd like to create your own material instead, you may follow similar steps as those used for creating the supplied material.

  3. If enabling SSL/TLS, configure SSL/TLS parameters.

    If you are using custom material, replace the paths of the files accordingly.

    singlenode.security.tls.enable=true
singlenode.security.tls.privateKey.location=../config/server-key.key
singlenode.security.tls.certificate.location=../config/server-cert.crt
singlenode.security.tls.keyStore.location=../config/server.keystore.jks
singlenode.security.tls.keyStore.pwd.location=../config/server.keystore.jks.passwd
singlenode.security.tls.trustStore.location=../config/client.truststore.jks

    For descriptions of these properties, see Pravega Security Configurations.

  4. If enabling auth, configure auth parameters.

    singlenode.security.auth.enable=true
singlenode.security.auth.credentials.username=admin
singlenode.security.auth.credentials.pwd=1111_aaaa
singlenode.security.auth.pwdAuthHandler.accountsDb.location=../config/passwd

    For descriptions of these properties, see Pravega Security Configurations.

    Note:

    • The default Password Auth Handler supports Basic authentication for client-server communications. You may deploy additional Auth Handler plugins by placing them in the classpath.

    • The default handler's configuration file shown above - passwd file - contains a single user with credentials containing username admin and password 1111_aaaa.

    • To create additional users or change the password for the default admin user:

      a) Create a file containing 1 or more entries of the form <user>:<password>:<acl>;.

      For example: jdoe:strong-password:*,READ_UPDATE;

      b) Use the PasswordCreatorTool to create a new file with the passwords encrypted. Configure this new file instead of the supplied passwd file.

  5. If enabling SSL/TLS, ensure that the server's certificate is trusted.

    Note: This step is only needed the first time you run SSL/TLS-enabled standalone mode with a certificate. If you have already imported the certificate earlier, you don't need to do it again the next time you launch the server.

    A server certificate can be rendered trusted via either Chain of Trust or via Direct Trust.

    • Chain of Trust: A chain of trust, which is the standard SSL/TLS certificate trust model, is established by verifying that the certificate is issued and signed by a trusted CA. To establish chain of trust for a certificate signed by a custom CA, we need to import the certificate of the CA into the JVM's truststore. The provided server-cert.crt is signed using a CA represented by another provided certificate ca-cert.crt: so, when using those certificate, you should import ca-cert.crt file.

    • Direct Trust: This type of trust is established by adding the server's certificate to the truststore. It is a non-standard way of establishing trust, which is useful when using self-signed certificates.

    Here's how to import the provided CA certificate file ca-cert.crt to Java's system truststore, for establishing 'Chain of Trust':

    a) Change directory to Standalone mode config directory.

    $ cd /path/to/pravega/config

    or

    $ cd /path/to/pravega-<version>/conf

    b) Convert the X.509 PEM (ASCII) encoded ca-cert.crt file to DER (Binary) encoded format:

    $ openssl x509 -in server-cert.crt -inform pem -out ca-cert.der -outform der

    c) Import the certificate into the local JVM's trust store:

    $ sudo keytool -importcert -alias local-CA \
     -keystore /path/to/jre/lib/security/cacerts  -file ca-cert.der

    When prompted for keystore password, use the default JRE keystore password changeit or the custom one that you might have configured for the JRE.

    Note: If you want to use a custom truststore instead of adding the certificate to the system truststore, create a new truststore using Java keytool utility, add the certificate to it and configure the JVM to use it by setting the system properties javax.net.ssl.trustStore and javax.net.ssl.trustStorePassword.

Now that you have enabled and configured security, restart the standalone mode server and verify that security is working.

Verifying Security

  1. Verify that the controller REST API is responding properly:

    # If both TLS and Auth are enabled
$ curl -v -k -u admin:1111_aaaa https://<host-name-or-ip/localhost>:9091/v1/scopes

# If only Auth is enabled
$ curl -v -u admin:1111_aaaa http://<host-name-or-ip/localhost>:9091/v1/scopes

    Note: -k in the command above avoids hostname verification and is needed only if you are enabling SSL/TLS. If you are using the provided certificate, the host's DNS name/IP isn't the subject (in CN or SAN), and therefore hostname verification will fail. -k lets the command to return data successfully. You can find details about curl's options here.

  2. Optionally, run security-enabled Reader/Writer from Pravega sample applications against the standalone server to verify it is responding appropriately to Read/Write requests.

    To do so, configure security in the client application and run it. The example below assumes both TLS and auth are enabled. If TLS is disabled, modify the Controller URI scheme to tcp instead of tls and remove the lines that add TLS-related client-side configuration.

     ClientConfig clientConfig = ClientConfig.builder()
              .controllerURI(URI.create("tls://localhost:9090"))

               // TLS-related client-side configuration
              .trustStore("/path/to/ca-cert.crt")
              .validateHostName(false)

               // Auth-related client-side configuration
              .credentials(new DefaultCredentials(this.password, this.username))

              .build();

You can find a client example with security enabled here.

Note:

  • Remember that clients can access standalone mode servers through the localhost interface only. Therefore, the hostname in the Controller URI should be specified as localhost in client applications when accessing standalone mode servers.
  • .validateHostName(false) disables hostname verification for client-to-segment-store communications.