diff --git a/.gitattributes b/.gitattributes
deleted file mode 100644
index 1ff0c42..0000000
--- a/.gitattributes
+++ /dev/null
@@ -1,63 +0,0 @@
-###############################################################################
-# Set default behavior to automatically normalize line endings.
-###############################################################################
-* text=auto
-
-###############################################################################
-# Set default behavior for command prompt diff.
-#
-# This is need for earlier builds of msysgit that does not have it on by
-# default for csharp files.
-# Note: This is only used by command line
-###############################################################################
-#*.cs     diff=csharp
-
-###############################################################################
-# Set the merge driver for project and solution files
-#
-# Merging from the command prompt will add diff markers to the files if there
-# are conflicts (Merging from VS is not affected by the settings below, in VS
-# the diff markers are never inserted). Diff markers may cause the following 
-# file extensions to fail to load in VS. An alternative would be to treat
-# these files as binary and thus will always conflict and require user
-# intervention with every merge. To do so, just uncomment the entries below
-###############################################################################
-#*.sln       merge=binary
-#*.csproj    merge=binary
-#*.vbproj    merge=binary
-#*.vcxproj   merge=binary
-#*.vcproj    merge=binary
-#*.dbproj    merge=binary
-#*.fsproj    merge=binary
-#*.lsproj    merge=binary
-#*.wixproj   merge=binary
-#*.modelproj merge=binary
-#*.sqlproj   merge=binary
-#*.wwaproj   merge=binary
-
-###############################################################################
-# behavior for image files
-#
-# image files are treated as binary by default.
-###############################################################################
-#*.jpg   binary
-#*.png   binary
-#*.gif   binary
-
-###############################################################################
-# diff behavior for common document formats
-# 
-# Convert binary document formats to text before diffing them. This feature
-# is only available from the command line. Turn it on by uncommenting the 
-# entries below.
-###############################################################################
-#*.doc   diff=astextplain
-#*.DOC   diff=astextplain
-#*.docx  diff=astextplain
-#*.DOCX  diff=astextplain
-#*.dot   diff=astextplain
-#*.DOT   diff=astextplain
-#*.pdf   diff=astextplain
-#*.PDF   diff=astextplain
-#*.rtf   diff=astextplain
-#*.RTF   diff=astextplain
diff --git a/.github/workflows/continuous.yml b/.github/workflows/continuous.yml
index c364560..c92ff8c 100644
--- a/.github/workflows/continuous.yml
+++ b/.github/workflows/continuous.yml
@@ -1,40 +1,40 @@
-# ------------------------------------------------------------------------------
-# <auto-generated>
-#
-#     This code was generated.
-#
-#     - To turn off auto-generation set:
-#
-#         [GitHubActions (AutoGenerate = false)]
-#
-#     - To trigger manual generation invoke:
-#
-#         nuke --generate-configuration GitHubActions_continuous --host GitHubActions
-#
-# </auto-generated>
-# ------------------------------------------------------------------------------
-
-name: continuous
-
-on: [push]
-
-jobs:
-  ubuntu-latest:
-    name: ubuntu-latest
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v3
-        with:
-          fetch-depth: 0
-      - name: 'Cache: .nuke/temp, ~/.nuget/packages'
-        uses: actions/cache@v3
-        with:
-          path: |
-            .nuke/temp
-            ~/.nuget/packages
-          key: ${{ runner.os }}-${{ hashFiles('**/global.json', '**/*.csproj', '**/Directory.Packages.props') }}
-      - name: 'Run: Publish'
-        run: ./build.cmd Publish
-        env:
-          NugetApiKey: ${{ secrets.NUGET_API_KEY }}
-          SlackWebhook: ${{ secrets.SLACK_WEBHOOK }}
+# ------------------------------------------------------------------------------
+# <auto-generated>
+#
+#     This code was generated.
+#
+#     - To turn off auto-generation set:
+#
+#         [GitHubActions (AutoGenerate = false)]
+#
+#     - To trigger manual generation invoke:
+#
+#         nuke --generate-configuration GitHubActions_continuous --host GitHubActions
+#
+# </auto-generated>
+# ------------------------------------------------------------------------------
+
+name: continuous
+
+on: [push]
+
+jobs:
+  ubuntu-latest:
+    name: ubuntu-latest
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v3
+        with:
+          fetch-depth: 0
+      - name: 'Cache: .nuke/temp, ~/.nuget/packages'
+        uses: actions/cache@v3
+        with:
+          path: |
+            .nuke/temp
+            ~/.nuget/packages
+          key: ${{ runner.os }}-${{ hashFiles('**/global.json', '**/*.csproj', '**/Directory.Packages.props') }}
+      - name: 'Run: Publish'
+        run: ./build.cmd Publish
+        env:
+          NugetApiKey: ${{ secrets.NUGET_API_KEY }}
+          SlackWebhook: ${{ secrets.SLACK_WEBHOOK }}
diff --git a/build.cmd b/build.cmd
index b08cc59..29b7ab4 100755
--- a/build.cmd
+++ b/build.cmd
@@ -1,7 +1,8 @@
-:; set -eo pipefail
-:; SCRIPT_DIR=$(cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd)
-:; ${SCRIPT_DIR}/build.sh "$@"
-:; exit $?
-
-@ECHO OFF
-powershell -ExecutionPolicy ByPass -NoProfile -File "%~dp0build.ps1" %*
+:; set -eo pipefail
+:; SCRIPT_DIR=$(cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd)
+:; ${SCRIPT_DIR}/build.sh "$@"
+:; exit $?
+
+@ECHO OFF
+
+powershell -ExecutionPolicy ByPass -NoProfile -File "%~dp0build.ps1" %*
diff --git a/build.ps1 b/build/scripts/build.ps1
similarity index 90%
rename from build.ps1
rename to build/scripts/build.ps1
index c0c0e61..2fb61e3 100644
--- a/build.ps1
+++ b/build/scripts/build.ps1
@@ -1,74 +1,75 @@
-[CmdletBinding()]
-Param(
-    [Parameter(Position=0,Mandatory=$false,ValueFromRemainingArguments=$true)]
-    [string[]]$BuildArguments
-)
-
-Write-Output "PowerShell $($PSVersionTable.PSEdition) version $($PSVersionTable.PSVersion)"
-
-Set-StrictMode -Version 2.0; $ErrorActionPreference = "Stop"; $ConfirmPreference = "None"; trap { Write-Error $_ -ErrorAction Continue; exit 1 }
-$PSScriptRoot = Split-Path $MyInvocation.MyCommand.Path -Parent
-
-###########################################################################
-# CONFIGURATION
-###########################################################################
-
-$BuildProjectFile = "$PSScriptRoot\build\_build.csproj"
-$TempDirectory = "$PSScriptRoot\\.nuke\temp"
-
-$DotNetGlobalFile = "$PSScriptRoot\\global.json"
-$DotNetInstallUrl = "https://dot.net/v1/dotnet-install.ps1"
-$DotNetChannel = "STS"
-
-$env:DOTNET_SKIP_FIRST_TIME_EXPERIENCE = 1
-$env:DOTNET_CLI_TELEMETRY_OPTOUT = 1
-$env:DOTNET_MULTILEVEL_LOOKUP = 0
-
-###########################################################################
-# EXECUTION
-###########################################################################
-
-function ExecSafe([scriptblock] $cmd) {
-    & $cmd
-    if ($LASTEXITCODE) { exit $LASTEXITCODE }
-}
-
-# If dotnet CLI is installed globally and it matches requested version, use for execution
-if ($null -ne (Get-Command "dotnet" -ErrorAction SilentlyContinue) -and `
-     $(dotnet --version) -and $LASTEXITCODE -eq 0) {
-    $env:DOTNET_EXE = (Get-Command "dotnet").Path
-}
-else {
-    # Download install script
-    $DotNetInstallFile = "$TempDirectory\dotnet-install.ps1"
-    New-Item -ItemType Directory -Path $TempDirectory -Force | Out-Null
-    [Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12
-    (New-Object System.Net.WebClient).DownloadFile($DotNetInstallUrl, $DotNetInstallFile)
-
-    # If global.json exists, load expected version
-    if (Test-Path $DotNetGlobalFile) {
-        $DotNetGlobal = $(Get-Content $DotNetGlobalFile | Out-String | ConvertFrom-Json)
-        if ($DotNetGlobal.PSObject.Properties["sdk"] -and $DotNetGlobal.sdk.PSObject.Properties["version"]) {
-            $DotNetVersion = $DotNetGlobal.sdk.version
-        }
-    }
-
-    # Install by channel or version
-    $DotNetDirectory = "$TempDirectory\dotnet-win"
-    if (!(Test-Path variable:DotNetVersion)) {
-        ExecSafe { & powershell $DotNetInstallFile -InstallDir $DotNetDirectory -Channel $DotNetChannel -NoPath }
-    } else {
-        ExecSafe { & powershell $DotNetInstallFile -InstallDir $DotNetDirectory -Version $DotNetVersion -NoPath }
-    }
-    $env:DOTNET_EXE = "$DotNetDirectory\dotnet.exe"
-}
-
-Write-Output "Microsoft (R) .NET SDK version $(& $env:DOTNET_EXE --version)"
-
-if (Test-Path env:NUKE_ENTERPRISE_TOKEN) {
-    & $env:DOTNET_EXE nuget remove source "nuke-enterprise" > $null
-    & $env:DOTNET_EXE nuget add source "https://f.feedz.io/nuke/enterprise/nuget" --name "nuke-enterprise" --username "PAT" --password $env:NUKE_ENTERPRISE_TOKEN > $null
-}
-
-ExecSafe { & $env:DOTNET_EXE build $BuildProjectFile /nodeReuse:false /p:UseSharedCompilation=false -nologo -clp:NoSummary --verbosity quiet }
-ExecSafe { & $env:DOTNET_EXE run --project $BuildProjectFile --no-build -- $BuildArguments }
+[CmdletBinding()]
+Param(
+    [Parameter(Position=0,Mandatory=$false,ValueFromRemainingArguments=$true)]
+    [string[]]$BuildArguments
+)
+
+Write-Output "PowerShell $($PSVersionTable.PSEdition) version $($PSVersionTable.PSVersion)"
+
+Set-StrictMode -Version 2.0; $ErrorActionPreference = "Stop"; $ConfirmPreference = "None"; trap { Write-Error $_ -ErrorAction Continue; exit 1 }
+$PSScriptRoot = Split-Path $MyInvocation.MyCommand.Path -Parent
+$SolutionRoot = (Get-Item $PSScriptRoot).Parent.Parent.FullName
+Write-Output $SolutionRoot
+###########################################################################
+# CONFIGURATION
+###########################################################################
+
+$BuildProjectFile = "$SolutionRoot\build\_build.csproj"
+$TempDirectory = "$SolutionRoot\\.nuke\temp"
+
+$DotNetGlobalFile = "$SolutionRoot\\global.json"
+$DotNetInstallUrl = "https://dot.net/v1/dotnet-install.ps1"
+$DotNetChannel = "STS"
+
+$env:DOTNET_SKIP_FIRST_TIME_EXPERIENCE = 1
+$env:DOTNET_CLI_TELEMETRY_OPTOUT = 1
+$env:DOTNET_MULTILEVEL_LOOKUP = 0
+
+###########################################################################
+# EXECUTION
+###########################################################################
+
+function ExecSafe([scriptblock] $cmd) {
+    & $cmd
+    if ($LASTEXITCODE) { exit $LASTEXITCODE }
+}
+
+# If dotnet CLI is installed globally and it matches requested version, use for execution
+if ($null -ne (Get-Command "dotnet" -ErrorAction SilentlyContinue) -and `
+     $(dotnet --version) -and $LASTEXITCODE -eq 0) {
+    $env:DOTNET_EXE = (Get-Command "dotnet").Path
+}
+else {
+    # Download install script
+    $DotNetInstallFile = "$TempDirectory\dotnet-install.ps1"
+    New-Item -ItemType Directory -Path $TempDirectory -Force | Out-Null
+    [Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12
+    (New-Object System.Net.WebClient).DownloadFile($DotNetInstallUrl, $DotNetInstallFile)
+
+    # If global.json exists, load expected version
+    if (Test-Path $DotNetGlobalFile) {
+        $DotNetGlobal = $(Get-Content $DotNetGlobalFile | Out-String | ConvertFrom-Json)
+        if ($DotNetGlobal.PSObject.Properties["sdk"] -and $DotNetGlobal.sdk.PSObject.Properties["version"]) {
+            $DotNetVersion = $DotNetGlobal.sdk.version
+        }
+    }
+
+    # Install by channel or version
+    $DotNetDirectory = "$TempDirectory\dotnet-win"
+    if (!(Test-Path variable:DotNetVersion)) {
+        ExecSafe { & powershell $DotNetInstallFile -InstallDir $DotNetDirectory -Channel $DotNetChannel -NoPath }
+    } else {
+        ExecSafe { & powershell $DotNetInstallFile -InstallDir $DotNetDirectory -Version $DotNetVersion -NoPath }
+    }
+    $env:DOTNET_EXE = "$DotNetDirectory\dotnet.exe"
+}
+
+Write-Output "Microsoft (R) .NET SDK version $(& $env:DOTNET_EXE --version)"
+
+if (Test-Path env:NUKE_ENTERPRISE_TOKEN) {
+    & $env:DOTNET_EXE nuget remove source "nuke-enterprise" > $null
+    & $env:DOTNET_EXE nuget add source "https://f.feedz.io/nuke/enterprise/nuget" --name "nuke-enterprise" --username "PAT" --password $env:NUKE_ENTERPRISE_TOKEN > $null
+}
+
+ExecSafe { & $env:DOTNET_EXE build $BuildProjectFile /nodeReuse:false /p:UseSharedCompilation=false -nologo -clp:NoSummary --verbosity quiet }
+ExecSafe { & $env:DOTNET_EXE run --project $BuildProjectFile --no-build -- $BuildArguments }
diff --git a/build.sh b/build/scripts/build.sh
old mode 100755
new mode 100644
similarity index 97%
rename from build.sh
rename to build/scripts/build.sh
index 2f10dcb..f9c3a06
--- a/build.sh
+++ b/build/scripts/build.sh
@@ -1,67 +1,67 @@
-#!/usr/bin/env bash
-
-bash --version 2>&1 | head -n 1
-
-set -eo pipefail
-SCRIPT_DIR=$(cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd)
-
-###########################################################################
-# CONFIGURATION
-###########################################################################
-
-BUILD_PROJECT_FILE="$SCRIPT_DIR/build/_build.csproj"
-TEMP_DIRECTORY="$SCRIPT_DIR//.nuke/temp"
-
-DOTNET_GLOBAL_FILE="$SCRIPT_DIR//global.json"
-DOTNET_INSTALL_URL="https://dot.net/v1/dotnet-install.sh"
-DOTNET_CHANNEL="STS"
-
-export DOTNET_CLI_TELEMETRY_OPTOUT=1
-export DOTNET_SKIP_FIRST_TIME_EXPERIENCE=1
-export DOTNET_MULTILEVEL_LOOKUP=0
-
-###########################################################################
-# EXECUTION
-###########################################################################
-
-function FirstJsonValue {
-    perl -nle 'print $1 if m{"'"$1"'": "([^"]+)",?}' <<< "${@:2}"
-}
-
-# If dotnet CLI is installed globally and it matches requested version, use for execution
-if [ -x "$(command -v dotnet)" ] && dotnet --version &>/dev/null; then
-    export DOTNET_EXE="$(command -v dotnet)"
-else
-    # Download install script
-    DOTNET_INSTALL_FILE="$TEMP_DIRECTORY/dotnet-install.sh"
-    mkdir -p "$TEMP_DIRECTORY"
-    curl -Lsfo "$DOTNET_INSTALL_FILE" "$DOTNET_INSTALL_URL"
-    chmod +x "$DOTNET_INSTALL_FILE"
-
-    # If global.json exists, load expected version
-    if [[ -f "$DOTNET_GLOBAL_FILE" ]]; then
-        DOTNET_VERSION=$(FirstJsonValue "version" "$(cat "$DOTNET_GLOBAL_FILE")")
-        if [[ "$DOTNET_VERSION" == ""  ]]; then
-            unset DOTNET_VERSION
-        fi
-    fi
-
-    # Install by channel or version
-    DOTNET_DIRECTORY="$TEMP_DIRECTORY/dotnet-unix"
-    if [[ -z ${DOTNET_VERSION+x} ]]; then
-        "$DOTNET_INSTALL_FILE" --install-dir "$DOTNET_DIRECTORY" --channel "$DOTNET_CHANNEL" --no-path
-    else
-        "$DOTNET_INSTALL_FILE" --install-dir "$DOTNET_DIRECTORY" --version "$DOTNET_VERSION" --no-path
-    fi
-    export DOTNET_EXE="$DOTNET_DIRECTORY/dotnet"
-fi
-
-echo "Microsoft (R) .NET SDK version $("$DOTNET_EXE" --version)"
-
-if [[ ! -z ${NUKE_ENTERPRISE_TOKEN+x} && "$NUKE_ENTERPRISE_TOKEN" != "" ]]; then
-    "$DOTNET_EXE" nuget remove source "nuke-enterprise" &>/dev/null || true
-    "$DOTNET_EXE" nuget add source "https://f.feedz.io/nuke/enterprise/nuget" --name "nuke-enterprise" --username "PAT" --password "$NUKE_ENTERPRISE_TOKEN" --store-password-in-clear-text &>/dev/null || true
-fi
-
-"$DOTNET_EXE" build "$BUILD_PROJECT_FILE" /nodeReuse:false /p:UseSharedCompilation=false -nologo -clp:NoSummary --verbosity quiet
-"$DOTNET_EXE" run --project "$BUILD_PROJECT_FILE" --no-build -- "$@"
+#!/usr/bin/env bash
+
+bash --version 2>&1 | head -n 1
+
+set -eo pipefail
+SCRIPT_DIR=$(cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd)
+
+###########################################################################
+# CONFIGURATION
+###########################################################################
+
+BUILD_PROJECT_FILE="$SCRIPT_DIR/build/_build.csproj"
+TEMP_DIRECTORY="$SCRIPT_DIR//.nuke/temp"
+
+DOTNET_GLOBAL_FILE="$SCRIPT_DIR//global.json"
+DOTNET_INSTALL_URL="https://dot.net/v1/dotnet-install.sh"
+DOTNET_CHANNEL="STS"
+
+export DOTNET_CLI_TELEMETRY_OPTOUT=1
+export DOTNET_SKIP_FIRST_TIME_EXPERIENCE=1
+export DOTNET_MULTILEVEL_LOOKUP=0
+
+###########################################################################
+# EXECUTION
+###########################################################################
+
+function FirstJsonValue {
+    perl -nle 'print $1 if m{"'"$1"'": "([^"]+)",?}' <<< "${@:2}"
+}
+
+# If dotnet CLI is installed globally and it matches requested version, use for execution
+if [ -x "$(command -v dotnet)" ] && dotnet --version &>/dev/null; then
+    export DOTNET_EXE="$(command -v dotnet)"
+else
+    # Download install script
+    DOTNET_INSTALL_FILE="$TEMP_DIRECTORY/dotnet-install.sh"
+    mkdir -p "$TEMP_DIRECTORY"
+    curl -Lsfo "$DOTNET_INSTALL_FILE" "$DOTNET_INSTALL_URL"
+    chmod +x "$DOTNET_INSTALL_FILE"
+
+    # If global.json exists, load expected version
+    if [[ -f "$DOTNET_GLOBAL_FILE" ]]; then
+        DOTNET_VERSION=$(FirstJsonValue "version" "$(cat "$DOTNET_GLOBAL_FILE")")
+        if [[ "$DOTNET_VERSION" == ""  ]]; then
+            unset DOTNET_VERSION
+        fi
+    fi
+
+    # Install by channel or version
+    DOTNET_DIRECTORY="$TEMP_DIRECTORY/dotnet-unix"
+    if [[ -z ${DOTNET_VERSION+x} ]]; then
+        "$DOTNET_INSTALL_FILE" --install-dir "$DOTNET_DIRECTORY" --channel "$DOTNET_CHANNEL" --no-path
+    else
+        "$DOTNET_INSTALL_FILE" --install-dir "$DOTNET_DIRECTORY" --version "$DOTNET_VERSION" --no-path
+    fi
+    export DOTNET_EXE="$DOTNET_DIRECTORY/dotnet"
+fi
+
+echo "Microsoft (R) .NET SDK version $("$DOTNET_EXE" --version)"
+
+if [[ ! -z ${NUKE_ENTERPRISE_TOKEN+x} && "$NUKE_ENTERPRISE_TOKEN" != "" ]]; then
+    "$DOTNET_EXE" nuget remove source "nuke-enterprise" &>/dev/null || true
+    "$DOTNET_EXE" nuget add source "https://f.feedz.io/nuke/enterprise/nuget" --name "nuke-enterprise" --username "PAT" --password "$NUKE_ENTERPRISE_TOKEN" --store-password-in-clear-text &>/dev/null || true
+fi
+
+"$DOTNET_EXE" build "$BUILD_PROJECT_FILE" /nodeReuse:false /p:UseSharedCompilation=false -nologo -clp:NoSummary --verbosity quiet
+"$DOTNET_EXE" run --project "$BUILD_PROJECT_FILE" --no-build -- "$@"
diff --git a/release.ps1 b/build/scripts/release.ps1
similarity index 96%
rename from release.ps1
rename to build/scripts/release.ps1
index db39259..3e5a0fe 100644
--- a/release.ps1
+++ b/build/scripts/release.ps1
@@ -1,7 +1,7 @@
-param($tag)
-if ($PSBoundParameters.Keys.Count -ne 1) {
-    Write-Error 'Usage: release <version_number>'
-} else {
-    git tag -a $tag -m "Release $tag"
-    git push --follow-tags
+param($tag)
+if ($PSBoundParameters.Keys.Count -ne 1) {
+    Write-Error 'Usage: release <version_number>'
+} else {
+    git tag -a $tag -m "Release $tag"
+    git push --follow-tags
 }
\ No newline at end of file