{"payload":{"feedbackUrl":"https://github.com/orgs/community/discussions/53140","repo":{"id":358895430,"defaultBranch":"main","name":"openwrt","ownerLogin":"csharper2005","currentUserCanPush":false,"isFork":true,"isEmpty":false,"createdAt":"2021-04-17T14:09:06.000Z","ownerAvatar":"https://avatars.githubusercontent.com/u/82600916?v=4","public":true,"private":false,"isOrgOwned":false},"refInfo":{"name":"","listCacheKey":"v0:1726857822.0","currentOid":""},"activityList":{"items":[{"before":"34ce41c083b31876b13bcf1fdaa3fb211339fa22","after":"2133c8ae38e8bba1ff91fa3664d26e82875ee6b3","ref":"refs/heads/netis_n6-23.05","pushedAt":"2024-09-20T19:24:45.000Z","pushType":"force_push","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"ramips: add support for netis N6\n\nThis commit adds support for netis N6 WiFi 6 router.\n\nSpecification\n-------------\n- SoC       : MediaTek MT7621AT, MIPS, 880 MHz\n- RAM       : 256 MiB\n- Flash     : NAND 128 MiB (ESMT PSU1GA30DT)\n- WLAN      : MT7905DAN + MT7975DN\n  - 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2\n  - 5 GHz   : a/n/ac/ax, 1201 Mbps, MIMO 2x2\n- Ethernet  : 10/100/1000 Mbps x5 (1x WAN, 4x LAN)\n- USB       : 1x 3.0\n- UART      : 3.3V, 115200n8\n- Buttons   : 1x Reset\n              1x WPS\n- LEDs      : 1x Power (green)\n              1x System (green)\n              1x WAN (green)\n              1x WiFi 2.4 GHz (green), controlled by phy\n              1x WiFi 5 GHz (green), controlled by phy\n              1x WPS (green)\n              1x USB (green)\n              5x ethernet leds (green), controlled by switch\n- Power     : 12 VDC, 1.5 A\n\nInstallation\n------------\n1. Update the router using stock firmware web interface and OpenWrt\n   factory.bin image.\n\nRecovery and return to stock\n----------------------------\n1. Assign your PC a static IP 192.168.1.2 and connect to the router using\n   the ethernet cable;\n2. Power off the router;\n3. Press Reset button, power on the router and wait until ethernet led\n   start blinking;\n4. Release the button;\n5. Open http://192.168.1.1/ (N6 System Recovery Mode) in your browser;\n6. Upload OpenWrt factory.bin (or stock firmware *.bin) image and proceed\n   with upgrade.\n\nMAC addresses\n-------------\n+---------+-------------------+\n|         | MAC example       |\n+---------+-------------------+\n| LAN     | dc:xx:xx:49:xx:04 |\n| WAN     | dc:xx:xx:49:xx:05 |\n| WLAN 2g | dc:xx:xx:19:xx:06 |\n| WLAN 5g | dc:xx:xx:79:xx:06 |\n+---------+-------------------+\nThe WLAN MAC prototype was found in 'Factory', 0x4\nThe LAN MAC was found in 'Factory', 0x7ef20\nThe WAN MAC was found in 'Factory', 0x7ef26\n\nKnown issue\n-----------\n2.4 GHz WLAN doesn't start with mt76 driver.\n\nProbable reason:\n   Original Netis N6 EEPROM contains wrong MT_EE_WIFI_CONF value (0xd2).\n   Other routers with the same WLAN hardware (e.g., Routerich AX1800)\n   have MT_EE_WIFI_CONF = 0x92.\n\nWorkaround (already included in this commit):\n   Extract EEPROM to a file at the first time boot and change\n   MT_EE_WIFI_CONF (offset 0x190) value from 0xd2 to 0x92. See\n   /etc/hotplug.d/firmware/11-mt76-caldata for details.\n\nSigned-off-by: Mikhail Zhilkin <csharper2005@gmail.com>\nLink: https://github.com/openwrt/openwrt/pull/16322\nSigned-off-by: Hauke Mehrtens <hauke@hauke-m.de>\n(cherry picked from commit f368e2d5ece1153ec242872f3c48991ed225d9b7)\n[ Fix merging onflicts in mt7621.mk, 10_fix_wifi_mac, platform.sh ]\n[ Change &ethphy4 -> &mdio in dts file ]\nSigned-off-by: Mikhail Zhilkin <csharper2005@gmail.com>","shortMessageHtmlLink":"ramips: add support for netis N6"}},{"before":"5773538c907610ebfd1ea13701383e511b7fd00b","after":"34ce41c083b31876b13bcf1fdaa3fb211339fa22","ref":"refs/heads/netis_n6-23.05","pushedAt":"2024-09-20T19:04:04.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"ramips: add support for netis N6\n\nThis commit adds support for netis N6 WiFi 6 router.\n\nSpecification\n-------------\n- SoC       : MediaTek MT7621AT, MIPS, 880 MHz\n- RAM       : 256 MiB\n- Flash     : NAND 128 MiB (ESMT PSU1GA30DT)\n- WLAN      : MT7905DAN + MT7975DN\n  - 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2\n  - 5 GHz   : a/n/ac/ax, 1201 Mbps, MIMO 2x2\n- Ethernet  : 10/100/1000 Mbps x5 (1x WAN, 4x LAN)\n- USB       : 1x 3.0\n- UART      : 3.3V, 115200n8\n- Buttons   : 1x Reset\n              1x WPS\n- LEDs      : 1x Power (green)\n              1x System (green)\n              1x WAN (green)\n              1x WiFi 2.4 GHz (green), controlled by phy\n              1x WiFi 5 GHz (green), controlled by phy\n              1x WPS (green)\n              1x USB (green)\n              5x ethernet leds (green), controlled by switch\n- Power     : 12 VDC, 1.5 A\n\nInstallation\n------------\n1. Update the router using stock firmware web interface and OpenWrt\n   factory.bin image.\n\nRecovery and return to stock\n----------------------------\n1. Assign your PC a static IP 192.168.1.2 and connect to the router using\n   the ethernet cable;\n2. Power off the router;\n3. Press Reset button, power on the router and wait until ethernet led\n   start blinking;\n4. Release the button;\n5. Open http://192.168.1.1/ (N6 System Recovery Mode) in your browser;\n6. Upload OpenWrt factory.bin (or stock firmware *.bin) image and proceed\n   with upgrade.\n\nMAC addresses\n-------------\n+---------+-------------------+\n|         | MAC example       |\n+---------+-------------------+\n| LAN     | dc:xx:xx:49:xx:04 |\n| WAN     | dc:xx:xx:49:xx:05 |\n| WLAN 2g | dc:xx:xx:19:xx:06 |\n| WLAN 5g | dc:xx:xx:79:xx:06 |\n+---------+-------------------+\nThe WLAN MAC prototype was found in 'Factory', 0x4\nThe LAN MAC was found in 'Factory', 0x7ef20\nThe WAN MAC was found in 'Factory', 0x7ef26\n\nKnown issue\n-----------\n2.4 GHz WLAN doesn't start with mt76 driver.\n\nProbable reason:\n   Original Netis N6 EEPROM contains wrong MT_EE_WIFI_CONF value (0xd2).\n   Other routers with the same WLAN hardware (e.g., Routerich AX1800)\n   have MT_EE_WIFI_CONF = 0x92.\n\nWorkaround (already included in this commit):\n   Extract EEPROM to a file at the first time boot and change\n   MT_EE_WIFI_CONF (offset 0x190) value from 0xd2 to 0x92. See\n   /etc/hotplug.d/firmware/11-mt76-caldata for details.\n\nSigned-off-by: Mikhail Zhilkin <csharper2005@gmail.com>\nLink: https://github.com/openwrt/openwrt/pull/16322\nSigned-off-by: Hauke Mehrtens <hauke@hauke-m.de>\n(cherry picked from commit f368e2d5ece1153ec242872f3c48991ed225d9b7)\n[ 1. Fix merging onflicts in mt7621.mk, 10_fix_wifi_mac, platform.sh;\n  2. Define the switch PHY on the SoC's mdio bus node instead of\n     \"&ethphy4\" in dts file ]\nSigned-off-by: Mikhail Zhilkin <csharper2005@gmail.com>","shortMessageHtmlLink":"ramips: add support for netis N6"}},{"before":"f368e2d5ece1153ec242872f3c48991ed225d9b7","after":null,"ref":"refs/heads/netis_n6","pushedAt":"2024-09-20T18:43:42.000Z","pushType":"branch_deletion","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"}},{"before":"844701f1c045bf7d9bd06014a4b0cf9dd3d6a29d","after":"8181f09049a0e3188f35f27e5b53fc47b39eec87","ref":"refs/heads/main","pushedAt":"2024-09-20T18:42:18.000Z","pushType":"push","commitsCount":134,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"generic: remove support for older kernels from swconfig\n\nThe legacy swconfig switch driver framework supports kernels older than\nLinux 6.6 by using #ifdef'ery with LINUX_VERSION_CODE. Remove all that.\n\nSigned-off-by: Daniel Golle <daniel@makrotopia.org>","shortMessageHtmlLink":"generic: remove support for older kernels from swconfig"}},{"before":null,"after":"5773538c907610ebfd1ea13701383e511b7fd00b","ref":"refs/heads/netis_n6-23.05","pushedAt":"2024-09-20T18:37:12.000Z","pushType":"branch_creation","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"base-files: fix merge of passwd/shadow/group lines with trailing colons\n\nEmpty trailing fields get lost when the lines are split and merged again\nat colons, resulting in unparsable entries. Only use the split fields for\nmatching against the other file, but emit the original line unchanged\nto fix the issue.\n\nFixes: de7ca7dafadf (\"base-files: merge /etc/passwd et al at sysupgrade config restore\")\nSigned-off-by: Matthias Schiffer <mschiffer@universe-factory.net>\n(cherry picked from commit 9bbaa6f2c0419739fb85d48d0f527cb1622946ee)","shortMessageHtmlLink":"base-files: fix merge of passwd/shadow/group lines with trailing colons"}},{"before":"b3988f1861dd44864c93106abb5f99a12283ad22","after":"f368e2d5ece1153ec242872f3c48991ed225d9b7","ref":"refs/heads/netis_n6","pushedAt":"2024-09-19T21:12:44.000Z","pushType":"force_push","commitsCount":0,"pusher":{"login":"hauke","name":"Hauke Mehrtens","path":"/hauke","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/78494?s=80&v=4"},"commit":{"message":"ramips: add support for netis N6\n\nThis commit adds support for netis N6 WiFi 6 router.\n\nSpecification\n-------------\n- SoC       : MediaTek MT7621AT, MIPS, 880 MHz\n- RAM       : 256 MiB\n- Flash     : NAND 128 MiB (ESMT PSU1GA30DT)\n- WLAN      : MT7905DAN + MT7975DN\n  - 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2\n  - 5 GHz   : a/n/ac/ax, 1201 Mbps, MIMO 2x2\n- Ethernet  : 10/100/1000 Mbps x5 (1x WAN, 4x LAN)\n- USB       : 1x 3.0\n- UART      : 3.3V, 115200n8\n- Buttons   : 1x Reset\n              1x WPS\n- LEDs      : 1x Power (green)\n              1x System (green)\n              1x WAN (green)\n              1x WiFi 2.4 GHz (green), controlled by phy\n              1x WiFi 5 GHz (green), controlled by phy\n              1x WPS (green)\n              1x USB (green)\n              5x ethernet leds (green), controlled by switch\n- Power     : 12 VDC, 1.5 A\n\nInstallation\n------------\n1. Update the router using stock firmware web interface and OpenWrt\n   factory.bin image.\n\nRecovery and return to stock\n----------------------------\n1. Assign your PC a static IP 192.168.1.2 and connect to the router using\n   the ethernet cable;\n2. Power off the router;\n3. Press Reset button, power on the router and wait until ethernet led\n   start blinking;\n4. Release the button;\n5. Open http://192.168.1.1/ (N6 System Recovery Mode) in your browser;\n6. Upload OpenWrt factory.bin (or stock firmware *.bin) image and proceed\n   with upgrade.\n\nMAC addresses\n-------------\n+---------+-------------------+\n|         | MAC example       |\n+---------+-------------------+\n| LAN     | dc:xx:xx:49:xx:04 |\n| WAN     | dc:xx:xx:49:xx:05 |\n| WLAN 2g | dc:xx:xx:19:xx:06 |\n| WLAN 5g | dc:xx:xx:79:xx:06 |\n+---------+-------------------+\nThe WLAN MAC prototype was found in 'Factory', 0x4\nThe LAN MAC was found in 'Factory', 0x7ef20\nThe WAN MAC was found in 'Factory', 0x7ef26\n\nKnown issue\n-----------\n2.4 GHz WLAN doesn't start with mt76 driver.\n\nProbable reason:\n   Original Netis N6 EEPROM contains wrong MT_EE_WIFI_CONF value (0xd2).\n   Other routers with the same WLAN hardware (e.g., Routerich AX1800)\n   have MT_EE_WIFI_CONF = 0x92.\n\nWorkaround (already included in this commit):\n   Extract EEPROM to a file at the first time boot and change\n   MT_EE_WIFI_CONF (offset 0x190) value from 0xd2 to 0x92. See\n   /etc/hotplug.d/firmware/11-mt76-caldata for details.\n\nSigned-off-by: Mikhail Zhilkin <csharper2005@gmail.com>\nLink: https://github.com/openwrt/openwrt/pull/16322\nSigned-off-by: Hauke Mehrtens <hauke@hauke-m.de>","shortMessageHtmlLink":"ramips: add support for netis N6"}},{"before":"d69fa72dd1174914258f5c8050b146ff6e67b011","after":"b3988f1861dd44864c93106abb5f99a12283ad22","ref":"refs/heads/netis_n6","pushedAt":"2024-09-16T17:20:19.000Z","pushType":"force_push","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"ramips: add support for netis N6\n\nThis commit adds support for netis N6 WiFi 6 router.\n\nSpecification\n-------------\n- SoC       : MediaTek MT7621AT, MIPS, 880 MHz\n- RAM       : 256 MiB\n- Flash     : NAND 128 MiB (ESMT PSU1GA30DT)\n- WLAN      : MT7905DAN + MT7975DN\n  - 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2\n  - 5 GHz   : a/n/ac/ax, 1201 Mbps, MIMO 2x2\n- Ethernet  : 10/100/1000 Mbps x5 (1x WAN, 4x LAN)\n- USB       : 1x 3.0\n- UART      : 3.3V, 115200n8\n- Buttons   : 1x Reset\n              1x WPS\n- LEDs      : 1x Power (green)\n              1x System (green)\n              1x WAN (green)\n              1x WiFi 2.4 GHz (green), controlled by phy\n              1x WiFi 5 GHz (green), controlled by phy\n              1x WPS (green)\n              1x USB (green)\n              5x ethernet leds (green), controlled by switch\n- Power     : 12 VDC, 1.5 A\n\nInstallation\n------------\n1. Update the router using stock firmware web interface and OpenWrt\n   factory.bin image.\n\nRecovery and return to stock\n----------------------------\n1. Assign your PC a static IP 192.168.1.2 and connect to the router using\n   the ethernet cable;\n2. Power off the router;\n3. Press Reset button, power on the router and wait until ethernet led\n   start blinking;\n4. Release the button;\n5. Open http://192.168.1.1/ (N6 System Recovery Mode) in your browser;\n6. Upload OpenWrt factory.bin (or stock firmware *.bin) image and proceed\n   with upgrade.\n\nMAC addresses\n-------------\n+---------+-------------------+\n|         | MAC example       |\n+---------+-------------------+\n| LAN     | dc:xx:xx:49:xx:04 |\n| WAN     | dc:xx:xx:49:xx:05 |\n| WLAN 2g | dc:xx:xx:19:xx:06 |\n| WLAN 5g | dc:xx:xx:79:xx:06 |\n+---------+-------------------+\nThe WLAN MAC prototype was found in 'Factory', 0x4\nThe LAN MAC was found in 'Factory', 0x7ef20\nThe WAN MAC was found in 'Factory', 0x7ef26\n\nKnown issue\n-----------\n2.4 GHz WLAN doesn't start with mt76 driver.\n\nProbable reason:\n   Original Netis N6 EEPROM contains wrong MT_EE_WIFI_CONF value (0xd2).\n   Other routers with the same WLAN hardware (e.g., Routerich AX1800)\n   have MT_EE_WIFI_CONF = 0x92.\n\nWorkaround (already included in this commit):\n   Extract EEPROM to a file at the first time boot and change\n   MT_EE_WIFI_CONF (offset 0x190) value from 0xd2 to 0x92. See\n   /etc/hotplug.d/firmware/11-mt76-caldata for details.\n\nSigned-off-by: Mikhail Zhilkin <csharper2005@gmail.com>","shortMessageHtmlLink":"ramips: add support for netis N6"}},{"before":"6fb77ea4fe34c8166c7842f659f213512503599a","after":"d69fa72dd1174914258f5c8050b146ff6e67b011","ref":"refs/heads/netis_n6","pushedAt":"2024-09-15T12:02:49.000Z","pushType":"force_push","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"ramips: add support for netis N6\n\nThis commit adds support for netis N6 WiFi 6 router.\n\nSpecification\n-------------\n- SoC       : MediaTek MT7621AT, MIPS, 880 MHz\n- RAM       : 256 MiB\n- Flash     : NAND 128 MiB (ESMT PSU1GA30DT)\n- WLAN      : MT7905DAN + MT7975DN\n  - 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2\n  - 5 GHz   : a/n/ac/ax, 1201 Mbps, MIMO 2x2\n- Ethernet  : 10/100/1000 Mbps x5 (1x WAN, 4x LAN)\n- USB       : 1x 3.0\n- UART      : 3.3V, 115200n8\n- Buttons   : 1x Reset\n              1x WPS\n- LEDs      : 1x Power (green)\n              1x System (green)\n              1x WAN (green)\n              1x WiFi 2.4 GHz (green), controlled by phy\n              1x WiFi 5 GHz (green), controlled by phy\n              1x WPS (green)\n              1x USB (green)\n              5x ethernet leds (green), controlled by switch\n- Power     : 12 VDC, 1.5 A\n\nInstallation\n------------\n1. Update the router using stock firmware web interface and OpenWrt\n   factory.bin image.\n\nRecovery and return to stock\n----------------------------\n1. Assign your PC a static IP 192.168.1.2 and connect to the router using\n   the ethernet cable;\n2. Power off the router;\n3. Press Reset button, power on the router and wait until ethernet led\n   start blinking;\n4. Release the button;\n5. Open http://192.168.1.1/ (N6 System Recovery Mode) in your browser;\n6. Upload OpenWrt factory.bin (or stock firmware *.bin) image and proceed\n   with upgrade.\n\nMAC addresses\n-------------\n+---------+-------------------+\n|         | MAC example       |\n+---------+-------------------+\n| LAN     | dc:xx:xx:49:xx:04 |\n| WAN     | dc:xx:xx:49:xx:05 |\n| WLAN 2g | dc:xx:xx:19:xx:06 |\n| WLAN 5g | dc:xx:xx:79:xx:06 |\n+---------+-------------------+\nThe WLAN MAC prototype was found in 'Factory', 0x4\nThe LAN MAC was found in 'Factory', 0x7ef20\nThe WAN MAC was found in 'Factory', 0x7ef26\n\nKnown issue\n-----------\n2.4 GHz WLAN doesn't start with mt76 driver.\n\nProbable reason:\n   Original Netis N6 EEPROM contains wrong MT_EE_WIFI_CONF value (0xd2).\n   Other routers with the same WLAN hardware (e.g., Routerich AX1800)\n   have MT_EE_WIFI_CONF = 0x92.\n\nWorkaround (already included in this commit):\n   Extract EEPROM to a file at the boot time using preinit script\n   '09_prepare_eeprom' and change  MT_EE_WIFI_CONF (offset 0x190) value\n   from 0xd2 to 0x92.\n\nSigned-off-by: Mikhail Zhilkin <csharper2005@gmail.com>","shortMessageHtmlLink":"ramips: add support for netis N6"}},{"before":"c35e5e94e07d2777c35c0f73c02229cdccc83f99","after":"6fb77ea4fe34c8166c7842f659f213512503599a","ref":"refs/heads/netis_n6","pushedAt":"2024-09-15T12:00:36.000Z","pushType":"force_push","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"ramips: add support for netis N6\n\nThis commit adds support for netis N6 WiFi 6 router.\n\nSpecification\n-------------\n- SoC       : MediaTek MT7621AT, MIPS, 880 MHz\n- RAM       : 256 MiB\n- Flash     : NAND 128 MiB (ESMT PSU1GA30DT)\n- WLAN      : MT7905DAN + MT7975DN\n  - 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2\n  - 5 GHz   : a/n/ac/ax, 1201 Mbps, MIMO 2x2\n- Ethernet  : 10/100/1000 Mbps x5 (1x WAN, 4x LAN)\n- USB       : 1x 3.0\n- UART      : 3.3V, 115200n8\n- Buttons   : 1x Reset\n              1x WPS\n- LEDs      : 1x Power (green)\n              1x System (green)\n              1x WAN (green)\n              1x WiFi 2.4 GHz (green), controlled by phy\n              1x WiFi 5 GHz (green), controlled by phy\n              1x WPS (green)\n              1x USB (green)\n              5x ethernet leds (green), controlled by switch\n- Power     : 12 VDC, 1.5 A\n\nInstallation\n------------\n1. Update the router using stock firmware web interface and OpenWrt\n   factory.bin image.\n\nRecovery and return to stock\n----------------------------\n1. Assign your PC a static IP 192.168.1.2 and connect to the router using\n   the ethernet cable;\n2. Power off the router;\n3. Press Reset button, power on the router and wait until ethernet led\n   start blinking;\n4. Release the button;\n5. Open http://192.168.1.1/ (N6 System Recovery Mode) in your browser;\n6. Upload OpenWrt factory.bin (or stock firmware *.bin) image and proceed\n   with upgrade.\n\nMAC addresses\n-------------\n+---------+-------------------+\n|         | MAC example       |\n+---------+-------------------+\n| LAN     | dc:xx:xx:49:xx:04 |\n| WAN     | dc:xx:xx:49:xx:05 |\n| WLAN 2g | dc:xx:xx:19:xx:06 |\n| WLAN 5g | dc:xx:xx:79:xx:06 |\n+---------+-------------------+\nThe WLAN MAC prototype was found in 'Factory', 0x4\nThe LAN MAC was found in 'Factory', 0x7ef20\nThe WAN MAC was found in 'Factory', 0x7ef26\n\nKnown issue\n-----------\n2.4 GHz WLAN doesn't start with mt76 driver.\n\nProbable reason:\n   Original Netis N6 EEPROM contains wrong MT_EE_WIFI_CONF value (0xd2).\n   Other routers with the same WLAN hardware (e.g., Routerich AX1800)\n   have MT_EE_WIFI_CONF = 0x92.\n\nWorkaround (already included in this commit):\n   Extract EEPROM to a file at the boot time using preinit script\n   '09_prepare_eeprom' and change  MT_EE_WIFI_CONF (offset 0x190) value\n   from 0xd2 to 0x92.\n\nSigned-off-by: Mikhail Zhilkin <csharper2005@gmail.com>","shortMessageHtmlLink":"ramips: add support for netis N6"}},{"before":"731445ee9291544f21382d6f355c0a60ccf12625","after":"c35e5e94e07d2777c35c0f73c02229cdccc83f99","ref":"refs/heads/netis_n6","pushedAt":"2024-09-15T11:17:59.000Z","pushType":"force_push","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"ramips: add support for netis N6\n\nThis commit adds support for netis N6 WiFi 6 router.\n\nSpecification\n-------------\n- SoC       : MediaTek MT7621AT, MIPS, 880 MHz\n- RAM       : 256 MiB\n- Flash     : NAND 128 MiB (ESMT PSU1GA30DT)\n- WLAN      : MT7905DAN + MT7975DN\n  - 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2\n  - 5 GHz   : a/n/ac/ax, 1201 Mbps, MIMO 2x2\n- Ethernet  : 10/100/1000 Mbps x5 (1x WAN, 4x LAN)\n- USB       : 1x 3.0\n- UART      : 3.3V, 115200n8\n- Buttons   : 1x Reset\n              1x WPS\n- LEDs      : 1x Power (green)\n              1x System (green)\n              1x WAN (green)\n              1x WiFi 2.4 GHz (green), controlled by phy\n              1x WiFi 5 GHz (green), controlled by phy\n              1x WPS (green)\n              1x USB (green)\n              5x ethernet leds (green), controlled by switch\n- Power     : 12 VDC, 1.5 A\n\nInstallation\n------------\n1. Update the router using stock firmware web interface and OpenWrt\n   factory.bin image.\n\nRecovery and return to stock\n----------------------------\n1. Assign your PC a static IP 192.168.1.2 and connect to the router using\n   the ethernet cable;\n2. Power off the router;\n3. Press Reset button, power on the router and wait until ethernet led\n   start blinking;\n4. Release the button;\n5. Open http://192.168.1.1/ (N6 System Recovery Mode) in your browser;\n6. Upload OpenWrt factory.bin (or stock firmware *.bin) image and proceed\n   with upgrade.\n\nMAC addresses\n-------------\n+---------+-------------------+\n|         | MAC example       |\n+---------+-------------------+\n| LAN     | dc:xx:xx:49:xx:04 |\n| WAN     | dc:xx:xx:49:xx:05 |\n| WLAN 2g | dc:xx:xx:19:xx:06 |\n| WLAN 5g | dc:xx:xx:79:xx:06 |\n+---------+-------------------+\nThe WLAN MAC prototype was found in 'Factory', 0x4\nThe LAN MAC was found in 'Factory', 0x7ef20\nThe WAN MAC was found in 'Factory', 0x7ef26\n\nKnown issue\n-----------\n2.4 GHz WLAN doesn't start with mt76 driver.\n\nProbable reason:\n   Original Netis N6 EEPROM contains wrong MT_EE_WIFI_CONF value (0xd2).\n   Other routers with the same WLAN hardware (e.g., Routerich AX1800)\n   have MT_EE_WIFI_CONF = 0x92.\n\nWorkaround (already included in this commit):\n   Extract EEPROM to a file at the boot time using preinit script\n   '09_prepare_eeprom' and change  MT_EE_WIFI_CONF (offset 0x190) value\n   from 0xd2 to 0x92.\n\nSigned-off-by: Mikhail Zhilkin <csharper2005@gmail.com>","shortMessageHtmlLink":"ramips: add support for netis N6"}},{"before":"0d6a7f58a53bcc5c719a25f7dd5a4b85f9f26804","after":"731445ee9291544f21382d6f355c0a60ccf12625","ref":"refs/heads/netis_n6","pushedAt":"2024-09-15T10:39:06.000Z","pushType":"force_push","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"ramips: add support for netis N6\n\nThis commit adds support for netis N6 WiFi 6 router.\n\nSpecification\n-------------\n- SoC       : MediaTek MT7621AT, MIPS, 880 MHz\n- RAM       : 256 MiB\n- Flash     : NAND 128 MiB (ESMT PSU1GA30DT)\n- WLAN      : MT7905DAN + MT7975DN\n  - 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2\n  - 5 GHz   : a/n/ac/ax, 1201 Mbps, MIMO 2x2\n- Ethernet  : 10/100/1000 Mbps x5 (1x WAN, 4x LAN)\n- USB       : 1x 3.0\n- UART      : 3.3V, 115200n8\n- Buttons   : 1x Reset\n              1x WPS\n- LEDs      : 1x Power (green)\n              1x System (green)\n              1x WAN (green)\n              1x WiFi 2.4 GHz (green), controlled by phy\n              1x WiFi 5 GHz (green), controlled by phy\n              1x WPS (green)\n              1x USB (green)\n              5x ethernet leds (green), controlled by switch\n- Power     : 12 VDC, 1.5 A\n\nInstallation\n------------\n1. Update the router using stock firmware web interface and OpenWrt\n   factory.bin image.\n\nRecovery and return to stock\n----------------------------\n1. Assign your PC a static IP 192.168.1.2 and connect to the router using\n   the ethernet cable;\n2. Power off the router;\n3. Press Reset button, power on the router and wait until ethernet led\n   start blinking;\n4. Release the button;\n5. Open http://192.168.1.1/ (N6 System Recovery Mode) in your browser;\n6. Upload OpenWrt factory.bin (or stock firmware *.bin) image and proceed\n   with upgrade.\n\nMAC addresses\n-------------\n+---------+-------------------+\n|         | MAC example       |\n+---------+-------------------+\n| LAN     | dc:xx:xx:49:xx:04 |\n| WAN     | dc:xx:xx:49:xx:05 |\n| WLAN 2g | dc:xx:xx:19:xx:06 |\n| WLAN 5g | dc:xx:xx:79:xx:06 |\n+---------+-------------------+\nThe WLAN MAC prototype was found in 'Factory', 0x4\nThe LAN MAC was found in 'Factory', 0x7ef20\nThe WAN MAC was found in 'Factory', 0x7ef26\n\nKnown issue\n-----------\n2.4 GHz WLAN doesn't start with mt76 driver.\n\nProbable reason:\n   Original Netis N6 EEPROM contains wrong MT_EE_WIFI_CONF value (0xd2).\n   Other routers with the same WLAN hardware (e.g., Routerich AX1800)\n   have MT_EE_WIFI_CONF = 0x92.\n\nWorkaround (already included in this commit):\n   Extract EEPROM to a file at the boot time using preinit script\n   '09_prepare_eeprom' and change  MT_EE_WIFI_CONF (offset 0x190) value\n   from 0xd2 to 0x92.\n\nSigned-off-by: Mikhail Zhilkin <csharper2005@gmail.com>","shortMessageHtmlLink":"ramips: add support for netis N6"}},{"before":"c4a926516038250105aef1cc5c6ec9fd5c74e300","after":"844701f1c045bf7d9bd06014a4b0cf9dd3d6a29d","ref":"refs/heads/main","pushedAt":"2024-09-13T15:00:03.000Z","pushType":"push","commitsCount":1,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"bpf-headers: fix llvm invocation\n\n- specify CC target explicitly\n- define KBUILD_SYM32=n to select \"native\" build format (if building with 64-bit arch)\n- rewrap lines (for good)\n\nSigned-off-by: Konstantin Demin <rockdrilla@gmail.com>\nLink: https://github.com/openwrt/openwrt/pull/15702\nSigned-off-by: Robert Marko <robimarko@gmail.com>","shortMessageHtmlLink":"bpf-headers: fix llvm invocation"}},{"before":"2cfcb9088226c36e851bc2833b6b1aebca159029","after":"c4a926516038250105aef1cc5c6ec9fd5c74e300","ref":"refs/heads/main","pushedAt":"2024-09-12T15:55:52.000Z","pushType":"push","commitsCount":18,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"mediatek: apply pending PHY driver fixes\n\nApply changes suggested by SkyLake Huang for pending series improving\nMediaTek Ethernet PHY drivers.\n\nSigned-off-by: Daniel Golle <daniel@makrotopia.org>","shortMessageHtmlLink":"mediatek: apply pending PHY driver fixes"}},{"before":"796ae68927edc52653f4a9d7a1c95bf9af9b962f","after":"0d6a7f58a53bcc5c719a25f7dd5a4b85f9f26804","ref":"refs/heads/netis_n6","pushedAt":"2024-09-11T15:55:20.000Z","pushType":"force_push","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"ramips: add support for netis N6\n\nThis commit adds support for netis N6 WiFi 6 router.\n\nSpecification\n-------------\n- SoC       : MediaTek MT7621AT, MIPS, 880 MHz\n- RAM       : 256 MiB\n- Flash     : NAND 128 MiB (ESMT PSU1GA30DT)\n- WLAN      : MT7905DAN + MT7975DN\n  - 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2\n  - 5 GHz   : a/n/ac/ax, 1201 Mbps, MIMO 2x2\n- Ethernet  : 10/100/1000 Mbps x5 (1x WAN, 4x LAN)\n- USB       : 1x 3.0\n- UART      : 3.3V, 115200n8\n- Buttons   : 1x Reset\n              1x WPS\n- LEDs      : 1x Power (green)\n              1x System (green)\n              1x WAN (green)\n              1x WiFi 2.4 GHz (green), controlled by phy\n              1x WiFi 5 GHz (green), controlled by phy\n              1x WPS (green)\n              1x USB (green)\n              5x ethernet leds (green), controlled by switch\n- Power     : 12 VDC, 1.5 A\n\nInstallation\n------------\n1. Assign your PC a static IP 192.168.1.2 and connect to the router using\n   the ethernet cable;\n2. Power off the router;\n3. Press Reset button, power on the router and wait until ethernet led\n   start blinking;\n4. Release the button;\n5. Open http://192.168.1.1/ (N6 System Recovery Mode) in your browser;\n6. Upload OpenWrt initramfs-kernel.bin image and start upgrade;\n7. Connect to the 192.168.1.1 using scp (root with no password) and\n   upload OpenWrt sysupgrade.bin image to the /tmp dir;\n8. Connect to the 192.168.1.1 using ssh shell (root with no password) and\n   run:\n   sysupgrade -n /tmp/sysupgrade.bin\n\nRecovery and return to stock\n----------------------------\nRepeat installation steps 1-6 and use stock firmware image in the step 6.\n\nMAC addresses\n-------------\n+---------+-------------------+\n|         | MAC example       |\n+---------+-------------------+\n| LAN     | dc:xx:xx:49:xx:04 |\n| WAN     | dc:xx:xx:49:xx:05 |\n| WLAN 2g | dc:xx:xx:19:xx:06 |\n| WLAN 5g | dc:xx:xx:79:xx:06 |\n+---------+-------------------+\nThe WLAN MAC prototype was found in 'Factory', 0x4\nThe LAN MAC was found in 'Factory', 0x7ef20\nThe WAN MAC was found in 'Factory', 0x7ef26\n\nKnown issue\n-----------\n2.4 GHz WLAN doesn't start with mt76 driver.\n\nProbable reason:\n   Original Netis N6 EEPROM contains wrong MT_EE_WIFI_CONF value (0xd2).\n   Other routers with the same WLAN hardware (e.g., Routerich AX1800)\n   have MT_EE_WIFI_CONF = 0x92.\n\nWorkaround (already included in this commit):\n   Extract EEPROM to a file at the boot time using preinit script\n   '09_prepare_eeprom' and change  MT_EE_WIFI_CONF (offset 0x190) value\n   from 0xd2 to 0x92.\n\nSigned-off-by: Mikhail Zhilkin <csharper2005@gmail.com>","shortMessageHtmlLink":"ramips: add support for netis N6"}},{"before":"7a09afc2a33287ff5cd8dcb8d9bafdc48de2a430","after":"796ae68927edc52653f4a9d7a1c95bf9af9b962f","ref":"refs/heads/netis_n6","pushedAt":"2024-09-10T19:19:59.000Z","pushType":"force_push","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"ramips: add support for netis N6\n\nThis commit adds support for netis N6 WiFi 6 router.\n\nSpecification\n-------------\n- SoC       : MediaTek MT7621AT, MIPS, 880 MHz\n- RAM       : 256 MiB\n- Flash     : NAND 128 MiB (ESMT PSU1GA30DT)\n- WLAN      : MT7905DAN + MT7975DN\n  - 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2\n  - 5 GHz   : a/n/ac/ax, 1201 Mbps, MIMO 2x2\n- Ethernet  : 10/100/1000 Mbps x5 (1x WAN, 4x LAN)\n- USB       : 1x 3.0\n- UART      : 3.3V, 115200n8\n- Buttons   : 1x Reset\n              1x WPS\n- LEDs      : 1x Power (green)\n              1x System (green)\n              1x WAN (green)\n              1x WiFi 2.4 GHz (green), controlled by phy\n              1x WiFi 5 GHz (green), controlled by phy\n              1x WPS (green)\n              1x USB (green)\n              5x ethernet leds (green), controlled by switch\n- Power     : 12 VDC, 1.5 A\n\nInstallation\n------------\n1. Assign your PC a static IP 192.168.1.2 and connect to the router using\n   the ethernet cable;\n2. Power off the router;\n3. Press Reset button, power on the router and wait until ethernet led\n   start blinking;\n4. Release the button;\n5. Open http://192.168.1.1/ (N6 System Recovery Mode) in your browser;\n6. Upload OpenWrt initramfs-kernel.bin image and start upgrade;\n7. Connect to the 192.168.1.1 using scp (root with no password) and\n   upload OpenWrt sysupgrade.bin image to the /tmp dir;\n8. Connect to the 192.168.1.1 using ssh shell (root with no password) and\n   run:\n   sysupgrade -n /tmp/sysupgrade.bin\n\nRecovery and return to stock\n----------------------------\nRepeat installation steps 1-6 and use stock firmware image in the step 6.\n\nMAC addresses\n-------------\n+---------+-------------------+\n|         | MAC example       |\n+---------+-------------------+\n| LAN     | dc:xx:xx:49:xx:04 |\n| WAN     | dc:xx:xx:49:xx:05 |\n| WLAN 2g | dc:xx:xx:19:xx:06 |\n| WLAN 5g | dc:xx:xx:79:xx:06 |\n+---------+-------------------+\nThe WLAN MAC prototype was found in 'Factory', 0x4\nThe LAN MAC was found in 'Factory', 0x7ef20\nThe WAN MAC was found in 'Factory', 0x7ef26\n\nKnown issue\n-----------\n2.4 GHz WLAN doesn't start with mt76 driver.\n\nProbable reason:\n   Original Netis N6 EEPROM contains wrong MT_EE_WIFI_CONF value (0xd2).\n   Other routers with the same WLAN hardware (e.g., Routerich AX1800)\n   have MT_EE_WIFI_CONF = 0x92.\n\nWorkaround (already included in this commit):\n   Extract EEPROM to a file at the boot time using preinit script\n   '09_prepare_eeprom' and change  MT_EE_WIFI_CONF (offset 0x190) value\n   from 0xd2 to 0x92.\n\nSigned-off-by: Mikhail Zhilkin <csharper2005@gmail.com>","shortMessageHtmlLink":"ramips: add support for netis N6"}},{"before":"c6f04f718ec89561f2261f2388857baa126eaa50","after":"2cfcb9088226c36e851bc2833b6b1aebca159029","ref":"refs/heads/main","pushedAt":"2024-09-09T18:05:27.000Z","pushType":"push","commitsCount":63,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"octeon: set Linux 6.6 as the default kernel\n\nAnd remove support for 6.1 while at it.\n\nSigned-off-by: Rui Salvaterra <rsalvaterra@gmail.com>\nLink: https://github.com/openwrt/openwrt/pull/15838\nSigned-off-by: Robert Marko <robimarko@gmail.com>","shortMessageHtmlLink":"octeon: set Linux 6.6 as the default kernel"}},{"before":"2a099d36a7e20a265d49cebf873355bd36f57f6d","after":"5773538c907610ebfd1ea13701383e511b7fd00b","ref":"refs/heads/openwrt-23.05","pushedAt":"2024-09-04T16:01:48.000Z","pushType":"push","commitsCount":107,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"base-files: fix merge of passwd/shadow/group lines with trailing colons\n\nEmpty trailing fields get lost when the lines are split and merged again\nat colons, resulting in unparsable entries. Only use the split fields for\nmatching against the other file, but emit the original line unchanged\nto fix the issue.\n\nFixes: de7ca7dafadf (\"base-files: merge /etc/passwd et al at sysupgrade config restore\")\nSigned-off-by: Matthias Schiffer <mschiffer@universe-factory.net>\n(cherry picked from commit 9bbaa6f2c0419739fb85d48d0f527cb1622946ee)","shortMessageHtmlLink":"base-files: fix merge of passwd/shadow/group lines with trailing colons"}},{"before":"f7117688e6d4876043d746e8ea45c76095351af5","after":"7a09afc2a33287ff5cd8dcb8d9bafdc48de2a430","ref":"refs/heads/netis_n6","pushedAt":"2024-09-03T20:27:34.000Z","pushType":"force_push","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"ramips: add support for netis N6\n\nThis commit adds support for netis N6 wireless WiFi 6 router.\n\nSpecification\n-------------\n- SoC       : MediaTek MT7621AT, MIPS, 880 MHz\n- RAM       : 256 MiB\n- Flash     : NAND 128 MiB (ESMT PSU1GA30DT)\n- WLAN      : MT7905DAN + MT7975DN\n  - 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2\n  - 5 GHz   : a/n/ac/ax, 1201 Mbps, MIMO 2x2\n- Ethernet  : 10/100/1000 Mbps x5 (1x WAN, 4x LAN)\n- USB       : 1x 3.0\n- UART      : 3.3V, 115200n8\n- Buttons   : 1x Reset\n              1x WPS\n- LEDs      : 1x Power (green)\n              1x System (green)\n              1x WAN (green)\n              1x WiFi 2.4 GHz (green), controlled by phy\n              1x WiFi 5 GHz (green), controlled by phy\n              1x WPS (green)\n              1x USB (green)\n              5x ethernet leds (green), controlled by switch\n- Power     : 12 VDC, 1.5 A\n\nInstallation\n------------\n1. Assign your PC a static IP 192.168.1.2 and connect to the router using\n   the ethernet cable;\n2. Power off the router;\n3. Press Reset button, power on the router and wait until ethernet led\n   start blinking;\n4. Release the button;\n5. Open http://192.168.1.1/ (N6 System Recovery Mode) in your browser;\n6. Upload OpenWrt initramfs-kernel.bin image and start upgrade;\n7. Connect to the 192.168.1.1 using scp (root with no password) and\n   upload OpenWrt sysupgrade.bin image to the /tmp dir;\n8. Connect to the 192.168.1.1 using ssh shell (root with no password) and\n   run:\n   sysupgrade -n sysupgrade.bin\n\nRecovery and return to stock\n----------------------------\nRepeat installation steps 1-6 and use stock firmware image at the step 6.\n\nMAC addresses\n-------------\n+---------+-------------------+\n|         | MAC example       |\n+---------+-------------------+\n| LAN     | dc:xx:xx:49:xx:04 |\n| WAN     | dc:xx:xx:49:xx:05 |\n| WLAN 2g | dc:xx:xx:19:xx:06 |\n| WLAN 5g | dc:xx:xx:79:xx:06 |\n+---------+-------------------+\nThe WLAN MACprototype was found in 'Factory', 0x4\nThe LAN MAC was found in 'Factory', 0xfff4\nThe WAN MAC was found in 'Factory', 0xfffa\n\nKnown issue\n-----------\n2.4 GHz WLAN doesn't start with mt76 driver.\n\nProbable reason:\n   Original Netis N6 EEPROM contains wrong MT_EE_WIFI_CONF value (0xd2).\n   Other routers with the same WLAN hardware (e.g., Routerich AX1800)\n   have MT_EE_WIFI_CONF = 0x92.\n\nWorkaround (already included in this commit):\n   Extract EEPROM to a file at the boot time using preinit script\n   '09_prepare_eeprom' and change  MT_EE_WIFI_CONF (offest 0x190) value\n   from 0xd2 to 0x92.\n\nSigned-off-by: Mikhail Zhilkin <csharper2005@gmail.com>","shortMessageHtmlLink":"ramips: add support for netis N6"}},{"before":"43c8c1c64cb34a0c610f97a683c53828be3570aa","after":"f7117688e6d4876043d746e8ea45c76095351af5","ref":"refs/heads/netis_n6","pushedAt":"2024-09-03T20:01:50.000Z","pushType":"force_push","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"ramips: add support for netis N6\n\nThis commit adds support for netis N6 wireless WiFi 6 router.\n\nSpecification\n-------------\n- SoC       : MediaTek MT7621AT, MIPS, 880 MHz\n- RAM       : 256 MiB\n- Flash     : NAND 128 MiB (ESMT PSU1GA30DT)\n- WLAN      : MT7905DAN + MT7975DN\n  - 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2\n  - 5 GHz   : a/n/ac/ax, 1201 Mbps, MIMO 2x2\n- Ethernet  : 10/100/1000 Mbps x5 (1x WAN, 4x LAN)\n- USB       : 1x 3.0\n- UART      : 3.3V, 115200n8\n- Buttons   : 1x Reset\n              1x WPS\n- LEDs      : 1x Power (green)\n              1x System (green)\n              1x WAN (green)\n              1x WiFi 2.4 GHz (green), controlled by phy\n              1x WiFi 5 GHz (green), controlled by phy\n              1x WPS (green)\n              1x USB (green)\n              5x ethernet leds (green), controlled by switch\n- Power     : 12 VDC, 1.5 A\n\nInstallation\n------------\n1. Assign your PC a static IP 192.168.1.2 and connect to the router using\n   the ethernet cable;\n2. Power off the router;\n3. Press Reset button, power on the router and wait until ethernet led\n   start blinking;\n4. Release the button;\n5. Open http://192.168.1.1/ (N6 System Recovery Mode) in your browser;\n6. Upload OpenWrt initramfs-kernel.bin image and start upgrade;\n7. Connect to the 192.168.1.1 using scp (root with no password) and\n   upload OpenWrt sysupgrade.bin image to the /tmp dir;\n8. Connect to the 192.168.1.1 using ssh shell (root with no password) and\n   run:\n   sysupgrade -n sysupgrade.bin\n\nRecovery and return to stock\n----------------------------\nRepeat installation steps 1-6 and use stock firmware image at the step 6.\n\nMAC addresses\n-------------\n+---------+-------------------+\n|         | MAC example       |\n+---------+-------------------+\n| LAN     | dc:xx:xx:49:xx:04 |\n| WAN     | dc:xx:xx:49:xx:05 |\n| WLAN 2g | dc:xx:xx:19:xx:06 |\n| WLAN 5g | dc:xx:xx:79:xx:06 |\n+---------+-------------------+\nThe WLAN MACprototype was found in 'Factory', 0x4\nThe LAN MAC was found in 'Factory', 0xfff4\nThe WAN MAC was found in 'Factory', 0xfffa\n\nKnown issue\n-----------\n2.4 GHz WLAN doesn't start with mt76 driver.\n\nProbable reason:\n   Original Netis N6 EEPROM contains wrong MT_EE_WIFI_CONF value (0xd2).\n   Other routers with the same WLAN hardware (e.g., Routerich AX1800)\n   have MT_EE_WIFI_CONF = 0x92.\n\nWorkaround (already included in this commit):\n   Extract EEPROM to a file at the boot time using preinit script\n   '09_prepare_eeprom' and change  MT_EE_WIFI_CONF (offest 0x190) value\n   from 0xd2 to 0x92.\n\nSigned-off-by: Mikhail Zhilkin <csharper2005@gmail.com>","shortMessageHtmlLink":"ramips: add support for netis N6"}},{"before":"c6f04f718ec89561f2261f2388857baa126eaa50","after":"43c8c1c64cb34a0c610f97a683c53828be3570aa","ref":"refs/heads/netis_n6","pushedAt":"2024-09-03T19:50:34.000Z","pushType":"push","commitsCount":2,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"ramips: add support for netis N6\n\nThis commit adds support for netis N6 wireless WiFi 6 router.\n\nSpecification\n-------------\n- SoC       : MediaTek MT7621AT, MIPS, 880 MHz\n- RAM       : 256 MiB\n- Flash     : NAND 128 MiB (ESMT PSU1GA30DT)\n- WLAN      : MT7905DAN + MT7975DN\n  - 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2\n  - 5 GHz   : a/n/ac/ax, 1201 Mbps, MIMO 2x2\n- Ethernet  : 10/100/1000 Mbps x5 (1x WAN, 4x LAN)\n- USB       : 1x 3.0\n- UART      : 3.3V, 115200n8\n- Buttons   : 1x Reset\n              1x WPS\n- LEDs      : 1x Power (green)\n              1x System (green)\n              1x WAN (green)\n              1x WiFi 2.4 GHz (green), controlled by phy\n              1x WiFi 5 GHz (green), controlled by phy\n              1x WPS (green)\n              1x USB (green)\n              5x ethernet leds (green), controlled by switch\n- Power     : 12 VDC, 1.5 A\n\nInstallation\n------------\n1. Assign your PC a static IP 192.168.1.2 and connect to the router using\n   the ethernet cable;\n2. Power off the router;\n3. Press Reset button, power on the router and wait until ethernet led\n   start blinking;\n4. Release the button;\n5. Open http://192.168.1.1/ (N6 System Recovery Mode) in your browser;\n6. Upload OpenWrt initramfs-kernel.bin image and start upgrade;\n7. Connect to the 192.168.1.1 using scp (root with no password) and\n   upload OpenWrt sysupgrade.bin image to the /tmp dir;\n8. Connect to the 192.168.1.1 using ssh shell (root with no password) and\n   run:\n   sysupgrade -n sysupgrade.bin\n\nRecovery and return to stock\n----------------------------\nRepeat installation steps 1-6 and use stock firmware image at the step 6.\n\nMAC addresses\n-------------\n+---------+-------------------+\n|         | MAC example       |\n+---------+-------------------+\n| LAN     | dc:xx:xx:49:xx:04 |\n| WAN     | dc:xx:xx:49:xx:05 |\n| WLAN 2g | dc:xx:xx:19:xx:06 |\n| WLAN 5g | dc:xx:xx:79:xx:06 |\n+---------+-------------------+\nThe WLAN MACprototype was found in 'Factory', 0x4\nThe LAN MAC was found in 'Factory', 0xfff4\nThe WAN MAC was found in 'Factory', 0xfffa\n\nKnown issue\n-----------\n2.4 GHz WLAN doesn't start with mt76 driver.\n\nProbable reason:\n   Original Netis N6 EEPROM contains wrong MT_EE_WIFI_CONF value (0xd2).\n   Other routers with the same WLAN hardware (e.g., Routerich AX1800)\n   have MT_EE_WIFI_CONF = 0x92.\n\nWorkaround (already included in this commit):\n   Extract EEPROM to a file at the boot time using preinit script\n   '09_prepare_eeprom' and change  MT_EE_WIFI_CONF (offest 0x190) value\n   from 0xd2 to 0x92.\n\nSigned-off-by: Mikhail Zhilkin <csharper2005@gmail.com>","shortMessageHtmlLink":"ramips: add support for netis N6"}},{"before":null,"after":"c6f04f718ec89561f2261f2388857baa126eaa50","ref":"refs/heads/netis_n6","pushedAt":"2024-08-30T19:36:41.000Z","pushType":"branch_creation","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"ath79: qihoo,c301: use nvmem\n\nUserspace handling is deprecated.\n\nSigned-off-by: Rosen Penev <rosenp@gmail.com>\nLink: https://github.com/openwrt/openwrt/pull/16244\nSigned-off-by: Hauke Mehrtens <hauke@hauke-m.de>","shortMessageHtmlLink":"ath79: qihoo,c301: use nvmem"}},{"before":"22f92cce22401ef7df44357a7e6921d2cf45c840","after":"c6f04f718ec89561f2261f2388857baa126eaa50","ref":"refs/heads/main","pushedAt":"2024-08-30T19:33:40.000Z","pushType":"push","commitsCount":636,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"ath79: qihoo,c301: use nvmem\n\nUserspace handling is deprecated.\n\nSigned-off-by: Rosen Penev <rosenp@gmail.com>\nLink: https://github.com/openwrt/openwrt/pull/16244\nSigned-off-by: Hauke Mehrtens <hauke@hauke-m.de>","shortMessageHtmlLink":"ath79: qihoo,c301: use nvmem"}},{"before":"7b8ccbd37c897070d0b12d02e87a8b52b516fcc7","after":"4e1d1b7df0ce6fa96d7462dc883917682f428046","ref":"refs/heads/openwrt-22.03","pushedAt":"2024-07-23T14:08:58.000Z","pushType":"push","commitsCount":27,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"OpenWrt v22.03.7: revert to branch defaults\n\nSigned-off-by: Hauke Mehrtens <hauke@hauke-m.de>","shortMessageHtmlLink":"OpenWrt v22.03.7: revert to branch defaults"}},{"before":"1f7ca927b788c180135b7708138e94386bb958b4","after":"7b8ccbd37c897070d0b12d02e87a8b52b516fcc7","ref":"refs/heads/openwrt-22.03","pushedAt":"2024-07-07T06:44:42.000Z","pushType":"push","commitsCount":49,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"ipq40xx: eap1300: add eap1300ext as alt model\n\nThe EnGenius EAP1300 and EAP1300EXT use identical boards and firmware\n(as flashed) from the vendor.\n\nAs with the EAP1300, the EAP1300EXT requires a specific firmware version\nto flash OpenWRT. Unfortunately, the required firmware is truncated on\nthe vendor's website.\n\nA working file can be created as follows:\n\n```\ncurl \\\nhttps://www.engeniustech.com/wp_firmware/eap1300-all-v3.5.3.5_c1.9.04.bin \\\n| perl -pe 's/\\x09EAP1300_A/\\x0cEAP1300EXT_A/' \\\n> eap1300ext-all-v3.5.3.5_c1.9.04.bin\n```\n\nThe file should have sha256:\n`58a1197a426139a12b03fd432334e677124cbe3384349bd7337f2ee71f1dcfd4`.\n\nPlease see commit 2b4ac79 for further\ndetails.\n\nThe vendor firmware must be decrypted before it can be flashed from\nOpenWRT. A tool able to do that is available from:\n\nhttps://github.com/ryancdotorg/enfringement/blob/main/decrypt.py\n\nSigned-off-by: Ryan Castellucci <code@ryanc.org>\n(cherry picked from commit 85f6f882232367b64c7933fb4856fdf4999c6aae)","shortMessageHtmlLink":"ipq40xx: eap1300: add eap1300ext as alt model"}},{"before":null,"after":"2a099d36a7e20a265d49cebf873355bd36f57f6d","ref":"refs/heads/mtk-23.05","pushedAt":"2024-07-06T19:57:42.000Z","pushType":"branch_creation","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"armsr: add realtek and smsc ethernet phy drivers to the default image\n\nThis adds two more common PHY brands to the image.\nRealtek is used on the Google Coral \"Phanbell\" board (i.MX8MQ).\nSMSC has been used on various Raspberry Pi boards.\n\nSigned-off-by: Mathew McBride <matt@traverse.com.au>\n(cherry picked from commit bcbdde00c3a81a53d11ddc6101517185ae426691)\nLink: https://github.com/openwrt/openwrt/pull/15808\nSigned-off-by: Hauke Mehrtens <hauke@hauke-m.de>","shortMessageHtmlLink":"armsr: add realtek and smsc ethernet phy drivers to the default image"}},{"before":"22f92cce22401ef7df44357a7e6921d2cf45c840","after":null,"ref":"refs/heads/mtk","pushedAt":"2024-07-06T19:57:12.000Z","pushType":"branch_deletion","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"}},{"before":null,"after":"22f92cce22401ef7df44357a7e6921d2cf45c840","ref":"refs/heads/mtk","pushedAt":"2024-07-06T17:49:39.000Z","pushType":"branch_creation","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"mpc85xx: fix Enterasys WS-AP3710i eth mac-address\n\nWith the introduction of the simpleImage loader, the MAC address is not\nset by the bootloader anymore.\n\nFix this by reading the MAC address from the U-Boot environment\npartition.\n\nSigned-off-by: David Bauer <mail@david-bauer.net>","shortMessageHtmlLink":"mpc85xx: fix Enterasys WS-AP3710i eth mac-address"}},{"before":"2a099d36a7e20a265d49cebf873355bd36f57f6d","after":null,"ref":"refs/heads/23.05.3-pr","pushedAt":"2024-07-06T17:49:24.000Z","pushType":"branch_deletion","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"}},{"before":null,"after":"2a099d36a7e20a265d49cebf873355bd36f57f6d","ref":"refs/heads/23.05.3-pr","pushedAt":"2024-07-06T17:32:05.000Z","pushType":"branch_creation","commitsCount":0,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"armsr: add realtek and smsc ethernet phy drivers to the default image\n\nThis adds two more common PHY brands to the image.\nRealtek is used on the Google Coral \"Phanbell\" board (i.MX8MQ).\nSMSC has been used on various Raspberry Pi boards.\n\nSigned-off-by: Mathew McBride <matt@traverse.com.au>\n(cherry picked from commit bcbdde00c3a81a53d11ddc6101517185ae426691)\nLink: https://github.com/openwrt/openwrt/pull/15808\nSigned-off-by: Hauke Mehrtens <hauke@hauke-m.de>","shortMessageHtmlLink":"armsr: add realtek and smsc ethernet phy drivers to the default image"}},{"before":"8695bc34426525a56340e1bbe578545219f2f1a3","after":"2a099d36a7e20a265d49cebf873355bd36f57f6d","ref":"refs/heads/openwrt-23.05","pushedAt":"2024-07-06T17:30:40.000Z","pushType":"push","commitsCount":92,"pusher":{"login":"csharper2005","name":null,"path":"/csharper2005","primaryAvatarUrl":"https://avatars.githubusercontent.com/u/82600916?s=80&v=4"},"commit":{"message":"armsr: add realtek and smsc ethernet phy drivers to the default image\n\nThis adds two more common PHY brands to the image.\nRealtek is used on the Google Coral \"Phanbell\" board (i.MX8MQ).\nSMSC has been used on various Raspberry Pi boards.\n\nSigned-off-by: Mathew McBride <matt@traverse.com.au>\n(cherry picked from commit bcbdde00c3a81a53d11ddc6101517185ae426691)\nLink: https://github.com/openwrt/openwrt/pull/15808\nSigned-off-by: Hauke Mehrtens <hauke@hauke-m.de>","shortMessageHtmlLink":"armsr: add realtek and smsc ethernet phy drivers to the default image"}}],"hasNextPage":true,"hasPreviousPage":false,"activityType":"all","actor":null,"timePeriod":"all","sort":"DESC","perPage":30,"cursor":"Y3Vyc29yOnYyOpK7MjAyNC0wOS0yMFQxOToyNDo0NS4wMDAwMDBazwAAAAS8Tbte","startCursor":"Y3Vyc29yOnYyOpK7MjAyNC0wOS0yMFQxOToyNDo0NS4wMDAwMDBazwAAAAS8Tbte","endCursor":"Y3Vyc29yOnYyOpK7MjAyNC0wNy0wNlQxNzozMDo0MC4wMDAwMDBazwAAAAR4hBBx"}},"title":"Activity · csharper2005/openwrt"}