Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

[Bug]: When Xdebug Enabled get 400 Bad Request AH01075 proxy_fcgi:error #992

Open
4 of 5 tasks
kevinjavitz opened this issue Jul 10, 2023 · 2 comments
Open
4 of 5 tasks
Assignees
Labels
bug triage Needs triaging

Comments

@kevinjavitz
Copy link

Have you already looked into this bug?

(Optional) Error message

[Mon Jul 10 03:29:12.162862 2023] [proxy_fcgi:error] [pid 528:tid 140006501874488] (11)Resource temporarily unavailable: [client 172.16.238.1:55990] AH01075: Error dispatching request to : (reading input brigade)

What went wrong?

When Xdebug is enabled I constantly am getting 400 bad request errors when not step debugging, the error message in apache 2.4 is:

[Mon Jul 10 03:29:12.162862 2023] [proxy_fcgi:error] [pid 528:tid 140006501874488] (11)Resource temporarily unavailable: [client 172.16.238.1:55990] AH01075: Error dispatching request to : (reading input brigade)

Xdebug log is:
[1324] Log opened at 2023-07-10 03:32:15.496884
[1324] [Config] INFO: Trigger value for 'XDEBUG_TRIGGER' not found, falling back to 'XDEBUG_SESSION'
[1324] [Config] INFO: Trigger value for 'XDEBUG_SESSION' not found, so not activating
[1324] [Config] INFO: Trigger value for 'XDEBUG_TRIGGER' not found, falling back to 'XDEBUG_SESSION'
[1324] [Config] INFO: Trigger value for 'XDEBUG_SESSION' not found, so not activating
[1324] [Config] INFO: Trigger value for 'XDEBUG_TRIGGER' not found, falling back to 'XDEBUG_SESSION'
[1324] [Config] INFO: Trigger value for 'XDEBUG_SESSION' not found, so not activating
[1324] [Config] INFO: Trigger value for 'XDEBUG_TRIGGER' not found, falling back to 'XDEBUG_SESSION'
[1324] [Config] INFO: Trigger value for 'XDEBUG_SESSION' not found, so not activating
[1324] [Config] INFO: Trigger value for 'XDEBUG_TRIGGER' not found, falling back to 'XDEBUG_SESSION'
[1324] [Config] INFO: Trigger value for 'XDEBUG_SESSION' not found, so not activating
[1324] Log closed at 2023-07-10 03:32:15.569692

I am wondering if it's possible to update xdebug to version 3.2.1? I tried running docker-compose pull but it did not update.

Expected behaviour

No 400 Bad Request Error

How can we reproduce the bug?

Using PHP 8.1.13 (from Devilbox 2.4.0) and WordPress. Using WSL2 with docker installed inside of it.

Host Operating System

Linux

Host Platform (amd64, arm64, other)

amd64

(Linux only) Is SELinux enabled?

Yes, SELinux is enabled

Docker version

23.0.4, build f480fb1

Docker Compose version

1.29.2, build 5becea4c

Devilbox version

1.29.2, build 5becea4c

Have you removed stopped containers before starting?

Yes

Have you pulled latest Docker images before starting?

Yes

Devilbox start command

docker-compose up -d

Config: .env file

###
###  ---------------------------------------------------
###  D E V I L B O X   R U N - T I M E   S E T T I N G S
###  ---------------------------------------------------
###
###  All the following settings are applied during
###  $ docker-compose up
###
###  No need to rebuild any docker images!
###
###  IMPORTANT:
###  ----------
###  When changing any values ensure to stop, rm and restart:
###  $ docker-compose stop
###  $ docker-compose rm -f
###  $ docker-compose up
###
###  NOTE:
###  -----
###  For you own custom variables, scroll to the bottom
###

# The following line will disable any shellcheck warnings throughout this file
# shellcheck disable=SC2034,SC2125


###
### Show all executed commands in each
### docker image during docker-compose up?
###
### 0: Quiet
### 1: Verbose
### 2: More verbose
DEBUG_COMPOSE_ENTRYPOINT=2


###
### Log to file or Docker logs.
###
### Logging to file means log files are available under log/
### on your host operating system.
### Logging to Docker logs means log files are streamed to
### stdout and stderr.
###
### 1: Log to Docker logs
### 0: Log to file
###
DOCKER_LOGS=0


###
### Relative or absolute path to the devilbox repository.
### (Used as a prefix for all mount paths)
### There is no need to change this.
###
### The only exception is for OSX users wanting to use NFS
### mounts instead of Filesystem mounts due to degraded performance
### on OSX.
###
### Note: When changing this variable you must re-create the container.
###       Simply remove it, it will be auto-created during the next start:
###
### $ docker-compose rm -f
###
DEVILBOX_PATH=.


###
### At what IP address should the docker services listen
### on the Host computer?
###
### The specified default should be fine for Linux and OSX (127.0.0.1:).
### If you are on windows, you will probably have to change
### it to the IP address of the docker machine.
###
### a.) Leave blank, to listen on all interfaces (no trailing colon ':')
###    LOCAL_LISTEN_ADDR=
### b.) If an IP is specified, note the trailing colon ':'
###    LOCAL_LISTEN_ADDR=127.0.0.1:
###
LOCAL_LISTEN_ADDR=


###
### This is the domain suffix your projects will be made available
### with mass-virtual-hosting.
### It is also required for the internal DNS server to be setup.
###
### Note: In addition to period or dot character ('.'), only ALPHA ([a-zA-Z]+) characters are supported.
###       Mac users should not use the .local TLD, as this will not resolve properly due Apple's
###         use of Multicast DNS.##
###
### Example:
###   TLD_SUFFIX=loc
### Makes your project available under xxxx.loc
###
### Example:
###   TLD_SUFFIX=local
### Makes your project available under xxxx.local
###
TLD_SUFFIX=loc


###
### Optional DNS configuration
### Allows you to add extra DNS records (above the wildcard entry)
### Useful if your host computer run other Docker services that you want to connect to or reach
### from within the Devilbox network by a custom hostname.
###
### Format:
### -------
### Resolve any custom defined hostname to an IP address (useable inside container and host os)
###     EXTRA_HOSTS=<hostname>=<ip>[,<hostname>=<ip>]
###
### Resolve any custom defined hostname to whatever IP address a CNAME resolves to
### (Useable inside the container and host OS).
### Note: CNAME must be resolvable by Google DNS
###     EXTRA_HOSTS=<hostname>=<CNAME>[,<hostname>=<CNAME>]
###
### Examples:
### ---------
### EXTRA_HOSTS=hostname.loc=1.2.3.4
### EXTRA_HOSTS=host.loc=1.2.3.4,host.example.org=3.4.5.6
EXTRA_HOSTS=


###
### Set your user id and group id
###
### This should be changed to the value of your local
### users uid and gid
###
### Type `id` on the terminal to find out your values
###
NEW_UID=1000
NEW_GID=1000


###
### Timezone for PHP Docker container (system and php.ini)
###
TIMEZONE=UTC



################################################################################
###
### INTRANET SETTINGS
###
################################################################################

###
### TLD_SUFFIX domains are checked if they are set in the
### host computer /etc/hosts or available via attached DNS server.
### Timeout is done on vhosts.php (intranet) via ajax calls.
### In order to keep performance, set this to a low value.
### DNS checks might not succeed in time on slow machines.
### If DNS is valid, but timeout is expired, set this to a higher value.
###
### DNS_CHECK_TIMEOUT value is how many seconds to time out
### Default is to timeout after 1 second (DNS_CHECK_TIMEOUT=1)
###
DNS_CHECK_TIMEOUT=1


###
### Devilbox UI SSL Certificate generation
###
### When using SSL each certificate requires names for which it is responsible:
### Common Name as well as alternative names.
###
### Specify comma separated hostnames below by which you want to access the Devilbox.
### Those hostnames will be included in the SSL certificate for the Devilbox intranet.
### This has nothing to do for SSL certificates for projects, it is just for the intranet
### itself.
###
DEVILBOX_UI_SSL_CN=localhost,*.localhost,devilbox,*.devilbox,httpd


###
### Devilbox UI Password protection enable/disable (1/0)
###
### Set DEVILBOX_UI_PROTECT to 1 in order to password protect the
### intranet.
###
### Example:
###   DEVILBOX_UI_PROTECT=1
###   DEVILBOX_UI_PROTECT=0
###
DEVILBOX_UI_PROTECT=0


###
### Devilbox UI Password
###
### When DEVILBOX_UI_PROTECT=1, use the following password
### to log in. The password can always be changed.
### When changing the password, make sure to restart your
### PHP container.
###
### Example:
###   DEVILBOX_UI_PASSWORD=my-very-secure-password
###   DEVILBOX_UI_PASSWORD=Some pass with spaces
###
### The default username is 'devilbox'
###
DEVILBOX_UI_PASSWORD=password


###
### Enable the Devilbox Intranet?
###
### Example:
###   DEVILBOX_UI_ENABLE=1
###   DEVILBOX_UI_ENABLE=0
###
DEVILBOX_UI_ENABLE=1


###
### Automatically be logged in into phpMyAdmin
###
### Example:
###   DEVILBOX_VENDOR_PHPMYADMIN_AUTOLOGIN=1
###   DEVILBOX_VENDOR_PHPMYADMIN_AUTOLOGIN=0
###
DEVILBOX_VENDOR_PHPMYADMIN_AUTOLOGIN=1


###
### Automatically be logged in into phpPgAdmin
###
### Example:
###   DEVILBOX_VENDOR_PHPPGADMIN_AUTOLOGIN=1
###   DEVILBOX_VENDOR_PHPPGADMIN_AUTOLOGIN=0
###
DEVILBOX_VENDOR_PHPPGADMIN_AUTOLOGIN=1



################################################################################
###
### 1. Choose Images (Version)
###
################################################################################

###
### You can choose any combination of httpd, mysql, postgresql or php.
### Each of them are fully compatible between one another.
###


###
### 1.1 Choose PHP Server Image
###
### Note: PHP 5.2 is not officially supported. Intranet won't work (due to lack of namespace support).
###       PHP 5.2 only works with Apache 2.4, Nginx stable and Nginx mainline.
###       Use at your own risk.
###
#PHP_SERVER=5.2
#PHP_SERVER=5.3
#PHP_SERVER=5.4
#PHP_SERVER=5.5
#PHP_SERVER=5.6
#PHP_SERVER=7.0
#PHP_SERVER=7.1
#PHP_SERVER=7.2
#PHP_SERVER=7.3
#PHP_SERVER=7.4
#PHP_SERVER=8.0
PHP_SERVER=8.1
#PHP_SERVER=8.2


###
### 1.2 Choose HTTPD Server Image
###
### Choose between 'debian' or 'alpine' flavour and then select the version
###
### Note: apache-2.2 has no arm64 support on 'alpine' flavour
###
HTTPD_FLAVOUR=alpine

#HTTPD_SERVER=apache-2.2
HTTPD_SERVER=apache-2.4
#HTTPD_SERVER=nginx-stable
#HTTPD_SERVER=nginx-mainline


###
### 1.3 Choose MySQL Server Image
###
#MYSQL_SERVER=mysql-5.5
#MYSQL_SERVER=mysql-5.6
#MYSQL_SERVER=mysql-5.7
#MYSQL_SERVER=mysql-8.0
#MYSQL_SERVER=percona-5.5
#MYSQL_SERVER=percona-5.6
#MYSQL_SERVER=percona-5.7
#MYSQL_SERVER=percona-8.0
#MYSQL_SERVER=mariadb-5.5
#MYSQL_SERVER=mariadb-10.0
#MYSQL_SERVER=mariadb-10.1
#MYSQL_SERVER=mariadb-10.2
#MYSQL_SERVER=mariadb-10.3
#MYSQL_SERVER=mariadb-10.4
#MYSQL_SERVER=mariadb-10.5
MYSQL_SERVER=mariadb-10.6
#MYSQL_SERVER=mariadb-10.7
#MYSQL_SERVER=mariadb-10.8
#MYSQL_SERVER=mariadb-10.9
#MYSQL_SERVER=mariadb-10.10


###
### 1.4 Choose PostgreSQL Server Image
###
### https://www.postgresql.org/support/versioning/
###
### IMPORTANT: Alpine based images might cause issues on Docker Toolbox or OSX
###            https://github.com/docker/toolbox/issues/510
###
#
# PostgreSQL without arm64 support
#
#PGSQL_SERVER=9.0
#PGSQL_SERVER=9.1
#PGSQL_SERVER=9.2
#PGSQL_SERVER=9.2-alpine
#
# PostgreSQL with arm64 support
#
#PGSQL_SERVER=9.2
#PGSQL_SERVER=9.3
#PGSQL_SERVER=9.3-alpine
#PGSQL_SERVER=9.4
#PGSQL_SERVER=9.4-alpine
#PGSQL_SERVER=9.5
#PGSQL_SERVER=9.5-alpine
#PGSQL_SERVER=9.6
#PGSQL_SERVER=9.6-alpine
#PGSQL_SERVER=10
#PGSQL_SERVER=10-alpine
#PGSQL_SERVER=11
#PGSQL_SERVER=11-alpine
#PGSQL_SERVER=12
#PGSQL_SERVER=12-alpine
#PGSQL_SERVER=13
#PGSQL_SERVER=13-alpine
#PGSQL_SERVER=14
PGSQL_SERVER=14-alpine
#PGSQL_SERVER=15
#PGSQL_SERVER=15-alpine
#PGSQL_SERVER=latest
#PGSQL_SERVER=alpine


###
### 1.5 Choose Redis Server Image
###
### IMPORTANT: Alpine based images might cause issues on Docker Toolbox or OSX
###            https://github.com/docker/toolbox/issues/510
###
#
# Redis without arm64 support
#
#REDIS_SERVER=2.8
#REDIS_SERVER=3.0
#REDIS_SERVER=3.0-alpine
#
# Redis with arm64 support
#
#REDIS_SERVER=3.2
#REDIS_SERVER=3.2-alpine
#REDIS_SERVER=4.0
#REDIS_SERVER=4.0-alpine
#REDIS_SERVER=5.0
#REDIS_SERVER=5.0-alpine
#REDIS_SERVER=6.0
#REDIS_SERVER=6.0-alpine
#REDIS_SERVER=6.2
REDIS_SERVER=6.2-alpine
#REDIS_SERVER=7.0
#REDIS_SERVER=7.0-alpine
#REDIS_SERVER=latest
#REDIS_SERVER=alpine


###
### 1.6 Choose Memcached Server Image
###
### IMPORTANT: Alpine based images might cause issues on Docker Toolbox or OSX
###            https://github.com/docker/toolbox/issues/510
###
#
# Memcached without arm64 support
#
#MEMCD_SERVER=1.4
#MEMCD_SERVER=1.4-alpine
#
# Memcached with arm64 support
#
#MEMCD_SERVER=1.5
#MEMCD_SERVER=1.5-alpine
#MEMCD_SERVER=1.6
MEMCD_SERVER=1.6-alpine
#MEMCD_SERVER=latest
#MEMCD_SERVER=alpine


###
### 1.7 Choose Mongo Server Image
###
### https://www.mongodb.com/evolved
###
#
# MongoDB without arm64 support
#
#MONGO_SERVER=2.8
#MONGO_SERVER=3.0
#MONGO_SERVER=3.2
#
# MongoDB with arm64 support
#
#MONGO_SERVER=3.4
#MONGO_SERVER=3.6
#MONGO_SERVER=4.0
#MONGO_SERVER=4.2
#MONGO_SERVER=4.4
MONGO_SERVER=5.0
#MONGO_SERVER=latest



################################################################################
###
### 2. Host Mounts (Your computer)
###
################################################################################

###
### Global mount options
###
### Note: When adding custom mount options, ensure to start with a
###       leading ',' (comma), as those options are prepended to already
###       existing mount options.
###
### Note: If no mount options are specified, leave this variable empty
###       and do not add a leading ',' (comma).
###
### MOUNT_OPTIONS=,cached
### MOUNT_OPTIONS=
###
### Example: Allow to share mounts accross container with SELINUX enabled
###
### MOUNT_OPTIONS=,z
###
MOUNT_OPTIONS=


###
### Local filesystem path to www projects.
###
### Note: When changing this variable you must re-create the container.
###       Simply remove it, it will be auto-created during the next start:
###
### $ docker-compose rm -f
###
HOST_PATH_HTTPD_DATADIR=./data/www


###
### Local filesystem path to where your backups are stored
###
### Note: When changing this variable you must re-create the container.
###       Simply remove it, it will be auto-created during the next start:
###
### $ docker-compose rm -f
###
HOST_PATH_BACKUPDIR=./backups


###
### The path on your host OS of the ssh directory to be mounted into the
### PHP container into /home/devilbox/.ssh.
###
### IMPORTANT: The path is mounted read-only to ensure you cannot accidentally
##             delete anything inside the php container.
###
HOST_PATH_SSH_DIR=~/.ssh



################################################################################
###
### 3. PHP Docker Settings
###
################################################################################

###
### Enable certain PHP modules which are not enabled by default
###
### Currently the only modules that can be enabled are 'ioncube' and 'blackfire'
### Also ensure to disable xdebug when using any of the above:
### https://xdebug.org/docs/install#compat
###
### PHP_MODULES_ENABLE=ioncube, blackfire
###
PHP_MODULES_ENABLE=


###
### Disable any PHP modules that you don't require
###
### Specify a comma separated list without spaces of modules to disable
###
### PHP_MODULES_DISABLE=xdebug,imagick,swoole
###
PHP_MODULES_DISABLE=oci8,PDO_OCI,pdo_sqlsrv,sqlsrv,rdkafka,swoole


###
### Postfix settings for email catch-all
###
### When set to '1' postfix is normally started and made available. However you still need
### to configure it to your needs yourself. For that you can use the autostart scripts
### and define a couple of 'postconf -e name=value' commands.
###
### When set to '2' (email catch-all), no mail will leave the Devilbox. It is automatically
### internally routed the the devilbox mail account and you can see each sent mail
### in the bundled intranet: https://localhost/mail.php
###
### Values:
### 0: Disable postfix (do not start it)
### 1: Enable/Start postfix
### 2: Enable/Start postfix and enable email catch-all
###
PHP_MAIL_CATCH_ALL=2


###
### Configure everything else about PHP in
### * cfg/php-ini-X.X/*.ini
### * cfg/php-fpm-X.X/*.conf



################################################################################
###
### 4. HTTPD Docker Settings
###
################################################################################

###
### Expose HTTPD Port to Host
###
HOST_PORT_HTTPD=80
HOST_PORT_HTTPD_SSL=443


###
### Globally enable/disable HTTP/2 support
###
### This cannot be done on a per vhost level and must be enabled/disabled globally.
###
### Values:
###  * 0: HTTP/2 is disabled
###  * 1: HTTP/2 is enabled
###
HTTPD_HTTP2_ENABLE=1


###
### SSL (HTTP/HTTPS) settings for automated vhost generation
###
### By default each project will have two vhosts (one for HTTP and one for HTTPS).
### You can control the SSL settings for your projects via the below stated values.
###
### This is internally achieved via the '-m' argument of https://github.com/devilbox/vhost-gen
###
### Values:
###   * both:  Serve HTTP and HTTPS for all projects
###   * redir: HTTP always redirects to HTTPS
###   * ssl:   Only serve HTTPS
###   * plain: Only serve HTTP
###
HTTPD_VHOST_SSL_TYPE=both


###
### Document Root Subdirectory
###
### In your project directory, which subfolder should
### serve your files?
###
### When changing this value, restart the devilbox.
###
HTTPD_DOCROOT_DIR=htdocs


###
### Per vHost Config Subdirectory
###
### In your project directory, which subfolder should
### hold apache, nginx templates for a customized vhost?
###
### When changing this value, restart the devilbox.
###
HTTPD_TEMPLATE_DIR=.devilbox


###
### Webserver timeout (in seconds) to upstream PHP-FPM server
###
### This value should be greater than PHP's max_execution_time,
### otherwise the php script could still run and the webserver will
### simply drop the connection before getting an answer by PHP.
###
HTTPD_TIMEOUT_TO_PHP_FPM=180


###
### NGINX ONLY
###
### Set worker_processes and worker_connections
###
### https://nginx.org/en/docs/ngx_core_module.html#worker_processes
### https://nginx.org/en/docs/ngx_core_module.html#worker_connections
###
HTTPD_NGINX_WORKER_PROCESSES=auto
HTTPD_NGINX_WORKER_CONNECTIONS=1024



################################################################################
###
### 5. MySQL Docker Settings
###
################################################################################

###
### MySQL root user password
###
### The password is required for the initial creation of the MySQL database
### as well as the Devilbox intranet to display schema and configuration settings.
###
### If you change your MySQL root user password via mysql cli, phpMyAdmin or other tools
### after the database has been created, ensure to adjust the value here accordingly as well.
###
### If you only change this value here after the database has been created,
### the MySQL root user password will not actually be changed and the Devilbox intranet
### won't be able to connect to the MySQL service.
###
MYSQL_ROOT_PASSWORD=


###
### Expose MySQL Port to Host
###
HOST_PORT_MYSQL=3306



################################################################################
###
### 6. PostgreSQL Docker Settings
###
################################################################################

###
### PostgreSQL 'root' user name (usually postgres)
###
PGSQL_ROOT_USER=postgres


###
### PostgreSQL 'root' user password
###
### If you want to set a password, ensure to remove 'trust' from
### PGSQL_HOST_AUTH_METHOD below
###
PGSQL_ROOT_PASSWORD=


###
### In order to not use a password for PostgreSQL, keep this value at 'trust'
###
PGSQL_HOST_AUTH_METHOD=trust


###
### Expose PostgreSQL Port to Host
###
HOST_PORT_PGSQL=5432



################################################################################
###
### 7. Redis Docker Settings
###
################################################################################

###
### Expose Redis Port to Host
###
HOST_PORT_REDIS=6379


###
### Custom startup arguments
###
### Apply custom startup arguments to redis
###
### Example: Password protection
###   Add password protection to the Redis server by specifying it should
###   require a password.
###   Note: Do not add quotes or spaces to the password
###
###   REDIS_ARGS=--requirepass my-redis-root-password
###
### Example: Verbosity
###
###   REDIS_ARGS=--loglevel verbose
###
REDIS_ARGS=
#REDIS_ARGS=--loglevel verbose --requirepass my-redis-root-password



################################################################################
###
### 8. Memcached Docker Settings
###
################################################################################

###
### Expose Memcached Port to Host
###
HOST_PORT_MEMCD=11211



################################################################################
###
### 9. MongoDB Docker Settings
###
################################################################################

###
### Expose MongoDB Port to Host
###
HOST_PORT_MONGO=27017



################################################################################
###
### 10. Bind Docker Settings
###
################################################################################

###
### Expose Bind Port to Host
###
HOST_PORT_BIND=1053


###
### Add comma separated DNS server from which you want to receive DNS
### You can also add DNS servers from your LAN (if any are available)
###
BIND_DNS_RESOLVER=8.8.8.8,8.8.4.4


###
### Validate DNSSEC
###
### Values:
###  no:    DNSSEC validation is disabled
###  yes:   DNSSEC validation is enabled, but a trust anchor must be manually configured.
###  auto:  DNSSEC validation is enabled, and a default trust anchor for root zone is used.
###
BIND_DNSSEC_VALIDATE=no


###
### Bind timing options (time in seconds)
###
### Leave empty for defaults.
### Only change when you know what you are doing.
###
BIND_TTL_TIME=
BIND_REFRESH_TIME=
BIND_RETRY_TIME=
BIND_EXPIRY_TIME=
BIND_MAX_CACHE_TIME=


###
### Show DNS Queries in Docker logs output?
###
### 1: Yes
### 0: No
BIND_LOG_DNS_QUERIES=0



################################################################################
###
### 11. Custom variables
###
################################################################################

###
### Any variable defined in this file will be available
### as environment variables to your PHP/HHV Docker container.
###
### This might be useful to set application environment and retrieve
### them via: <?php getenv('MY_APPLICATION_ENV'); ?>
###


###
### Example:
### <?php echo getenv('Foo'); ?> would produce: 'some value'
###
#Foo=some value

Config: docker-compose.override.yml

No response

Config: ./check-config.sh

# ==============================================================================
# Checking git
# ==============================================================================
[SUCC]  git is clean

# ==============================================================================
# Checking .env file
# ==============================================================================
[SUCC]  .env file exists
[SUCC]  .env file is readable
[SUCC]  All variables are present in .env file
[SUCC]  No variables is duplicated in .env file

# ==============================================================================
# Checking .env file values
# ==============================================================================
[SUCC]  All .env file variables have correct values

# ==============================================================================
# Checking required Devilbox core directories exist
# ==============================================================================
[SUCC]  All PHP cfg/ sub directories are present
[SUCC]  All PHP log/ sub directories are present
[SUCC]  All PHP mod/ sub directories are present
[SUCC]  All HTTPD cfg/ sub directories are present
[SUCC]  All HTTPD log/ sub directories are present

# ==============================================================================
# Checking devilbox core directory permissions
# ==============================================================================
[SUCC]  All devilbox directories have correct permissions
[SUCC]  All devilbox directories have correct uid
[SUCC]  All devilbox directories have correct gid

# ==============================================================================
# Checking devilbox core file permissions
# ==============================================================================
[SUCC]  All devilbox files have correct permissions
[SUCC]  All devilbox files have correct uid
[SUCC]  All devilbox files have correct gid

# ==============================================================================
# Checking projects permissions
# ==============================================================================
[SUCC]  All project dirs have correct permissions
[SUCC]  All project dirs have correct uid
[SUCC]  All project dirs have correct gid

# ==============================================================================
# Checking projects settings
# ==============================================================================
[SUCC]  All projects have valid DNS records
[SUCC]  All projects have valid HTTPD_DOCROOT_DIR

# ==============================================================================
# Checking customizations
# ==============================================================================
[NOTE]  [httpd]      Custom config present in cfg/apache-2.4/
[NOTE]  [php.ini]    Custom config present in cfg/php-ini-7.4/
[NOTE]  [php.ini]    Custom config present in cfg/php-ini-8.1/
[NOTE]  [php-fpm]    Custom config present in cfg/php-fpm-8.1/
find: ‘cfg/mariadb-10.8’: No such file or directory
find: ‘cfg/mariadb-10.9’: No such file or directory
find: ‘cfg/mariadb-10.10’: No such file or directory

# ==============================================================================
# SUMMARY
# ==============================================================================
[SUCC]  Found no errors
[NOTE]  4 custom configurations applied. If you encounter issues, reset them first.
[INFO]  Ensure to run 'docker-compose stop; docker-compose rm -f' on .env changes or custom configs

Log: docker-compose logs

bind_1   | [INFO] Debug level: 2
bind_1   |
bind_1   | --------------------------------------------------------------------------------
bind_1   | /etc/bind/named.conf
bind_1   | --------------------------------------------------------------------------------
bind_1   | include "/etc/bind/named.conf.logging";
bind_1   | include "/etc/bind/named.conf.options";
bind_1   | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
bind_1   | [INFO] BIND logging: disabled explicitly
bind_1   | [INFO] Using default DNS TTL time: 3600 sec
bind_1   | [INFO] Using default DNS Refresh time: 1200 sec
bind_1   | [INFO] Using default DNS Retry time: 180 sec
bind_1   | [INFO] Using default DNS Expiry time: 1209600 sec
bind_1   | [INFO] Using default DNS Max Cache time: 10800 sec
bind_1   | [INFO] Changing DNS Max Cache size to: 90%
bind_1   | [INFO] Not adding any PTR records
bind_1   | [INFO] Adding A Record: *.loc -> 127.0.0.1
bind_1   | zone rpz/IN: loaded serial 1688960782
bind_1   | OK
bind_1   | zone rpz/IN: final reference detached
bind_1   | [INFO] Not adding any CNAME records
bind_1   | [INFO] $ALLOW_QUERY not set.
bind_1   | [INFO] DNS query rules will not be set
bind_1   | [INFO] $ALLOW_RECURSION not set.
bind_1   | [INFO] DNS recursion rules will not be set
bind_1   | [INFO] DNSSEC Validation: no
bind_1   | [INFO] Adding custom DNS forwarder: 8.8.8.8,8.8.4.4
bind_1   |
bind_1   | --------------------------------------------------------------------------------
bind_1   | /etc/bind/named.conf.options
bind_1   | --------------------------------------------------------------------------------
bind_1   | options {
bind_1   |     directory "/var/cache/bind";
bind_1   |     dnssec-validation no;
bind_1   |     auth-nxdomain no;    # conform to RFC1035
bind_1   |     listen-on-v6 { any; };
bind_1   |     max-cache-size 90%;
bind_1   |     response-policy { zone "rpz"; };
bind_1   |     forwarders {
bind_1   |         8.8.8.8;
bind_1   |         8.8.4.4;
bind_1   |     };
bind_1   | };
bind_1   | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
bind_1   |
bind_1   | --------------------------------------------------------------------------------
bind_1   | /etc/bind/custom/conf/rpz.conf
bind_1   | --------------------------------------------------------------------------------
bind_1   | zone "rpz" IN {
bind_1   |     type master;
bind_1   |     allow-transfer { any; };
bind_1   |     allow-update { any; };
bind_1   |     file "/etc/bind/custom/zone/rpz";
bind_1   | };
bind_1   | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
bind_1   |
bind_1   | --------------------------------------------------------------------------------
bind_1   | /etc/bind/custom/zone/rpz
bind_1   | --------------------------------------------------------------------------------
bind_1   | $TTL 3600
bind_1   | @                               IN   SOA     bind. admin.bind. (
bind_1   |                                              1688960782     ; Serial number
bind_1   |                                              1200           ; Refresh time
bind_1   |                                              180            ; Retry time
bind_1   |                                              1209600        ; Expiry time
bind_1   |                                              10800          ; Negative Cache TTL
bind_1   | )
bind_1   |
bind_1   | ; NS Records
bind_1   |                                 IN   NS      bind.
bind_1   |
bind_1   | ; Custom Records
bind_1   | *.loc                           IN   A       127.0.0.1
bind_1   | ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
bind_1   | [INFO] Starting BIND 9.18.9
httpd_1  | [INFO] Debug level: 2
httpd_1  | [INFO] Runtime debug: 2
httpd_1  | [INFO] Changing user 'www-data' uid to: 1000
httpd_1  | root $ usermod -u 1000 www-data
httpd_1  | [INFO] Changing group 'www-data' gid to: 1000
httpd_1  | root $ groupmod -g 1000 www-data
httpd_1  | [INFO] Setting container timezone to: UTC
httpd_1  | root $ ln -sf /usr/share/zoneinfo/UTC /etc/localtime
httpd_1  | [INFO] Docker date set to: Mon Jul 10 03:46:23 UTC 2023
httpd_1  | [INFO] $DOCKER_LOGS disabled. Logging errors and access to log files inside container.
httpd_1  | [INFO] PHP 5.2 compatibility mode: Disabled
httpd_1  | [INFO] PHP-FPM: Enabled
httpd_1  | [INFO] PHP-FPM: Server address: 172.16.238.10
httpd_1  | [INFO] PHP-FPM: Server port: 9000
httpd_1  | [INFO] PHP-FPM: Timeout: 180
httpd_1  | [INFO] http2: Enabled
httpd_1  | [INFO] Main vhost: Enabled
httpd_1  | [INFO] Main vhost: Setting SSL type to: http and https
httpd_1  | [INFO] Main vhost: Enable automatic generation of SSL certificates
httpd_1  | [INFO] Main vhost: SSL CN: localhost,*.localhost,devilbox,*.devilbox,httpd
httpd_1  | [INFO] $MAIN_VHOST_DOCROOT not specified. Keeping default: htdocs
httpd_1  | [INFO] $MAIN_VHOST_TPL not specified. Keeping default: cfg
httpd_1  | [INFO] Main vhost: Enabling httpd status page
httpd_1  | [INFO] Main vhost: Changing status page alias to: /devilbox-httpd-status
httpd_1  | [INFO] Mass vhost: Enabled
httpd_1  | [INFO] Mass vhost: Setting SSL type to: http and https
httpd_1  | [INFO] Mass vhost: Enable automatic generation of SSL certificates
httpd_1  | [INFO] Mass vhost: changing tld to: .loc
httpd_1  | [INFO] Mass vhost: changing document root to: htdocs
httpd_1  | [INFO] Mass vhost: changing template dir to: .devilbox
httpd_1  | [INFO] Disabling PHP 5.2 compat mode
httpd_1  | [INFO] vhost-gen: no customized template found
httpd_1  | root $ sed -i'' 's/__PHP_ENABLE__/yes/g' /etc/vhost-gen/main.yml
httpd_1  | root $ sed -i'' 's/__PHP_ADDR__/172.16.238.10/g' /etc/vhost-gen/main.yml
httpd_1  | root $ sed -i'' 's/__PHP_PORT__/9000/g' /etc/vhost-gen/main.yml
httpd_1  | root $ sed -i'' 's/__PHP_TIMEOUT__/180/g' /etc/vhost-gen/main.yml
httpd_1  | root $ sed -i'' 's/__PHP_ENABLE__/yes/g' /etc/vhost-gen/mass.yml
httpd_1  | root $ sed -i'' 's/__PHP_ADDR__/172.16.238.10/g' /etc/vhost-gen/mass.yml
httpd_1  | root $ sed -i'' 's/__PHP_PORT__/9000/g' /etc/vhost-gen/mass.yml
httpd_1  | root $ sed -i'' 's/__PHP_TIMEOUT__/180/g' /etc/vhost-gen/mass.yml
httpd_1  | root $ sed -i'' 's/__DOCKER_LOGS_ERROR__/no/g' /etc/vhost-gen/main.yml
httpd_1  | root $ sed -i'' 's/__DOCKER_LOGS_ACCESS__/no/g' /etc/vhost-gen/main.yml
httpd_1  | root $ sed -i'' 's/__DOCKER_LOGS_ERROR__/no/g' /etc/vhost-gen/mass.yml
httpd_1  | root $ sed -i'' 's/__DOCKER_LOGS_ACCESS__/no/g' /etc/vhost-gen/mass.yml
httpd_1  | root $ sed -i'' 's/__HTTP2_ENABLE__/True/g' /etc/vhost-gen/main.yml
httpd_1  | root $ sed -i'' 's/__HTTP2_ENABLE__/True/g' /etc/vhost-gen/mass.yml
httpd_1  | root $ sed -i'' 's|__ENABLE_STATUS__|yes|g' /etc/vhost-gen/main.yml
httpd_1  | root $ sed -i'' 's|__STATUS_ALIAS__|/devilbox-httpd-status|g' /etc/vhost-gen/main.yml
httpd_1  | root $ vhost-gen -n localhost -p /var/www/default/htdocs -c /etc/vhost-gen/main.yml -o /var/www/default/cfg -v -d -s -m both
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:23): Loading configuration file        (-c): /etc/vhost-gen/main.yml
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:23): Loading vhost template (global)   (-t): /etc/vhost-gen/templates/apache24.yml
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:23): Loading vhost template (override) (-o): /var/www/default/cfg/apache24.yml
httpd_1  | vhost-gen: [WARN]  (2023-07-10 03:46:23): Override Vhost template not found: /var/www/default/cfg/apache24.yml
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:23): Creating vhost type: https and http (both)
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:23): Using vhost name: localhost
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:23): Log setting: dir -> True
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:23): Log setting: Not specified
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:23): Vhost config written to: /etc/httpd/conf.d/localhost.conf
httpd_1  | root $ sed -i'' 's|__DOCROOT_SUFFIX__|htdocs|g' /etc/vhost-gen/mass.yml
httpd_1  | root $ sed -i'' 's/__TLD__/.loc/g' /etc/vhost-gen/mass.yml
httpd_1  | root $ mkdir -p /etc/httpd/cert/main
httpd_1  | root $ cert-gen -v -c DE -s Berlin -l Berlin -o Devilbox -u Devilbox -n 'localhost' -e 'admin@localhost' -a 'localhost *.localhost devilbox *.devilbox httpd' /ca/devilbox-ca.key /ca/devilbox-ca.crt /etc/httpd/cert/main/localhost.key /etc/httpd/cert/main/localhost.csr /etc/httpd/cert/main/localhost.crt
httpd_1  | $ openssl req -newkey rsa:2048 -sha256 -nodes -extensions v3_req -config <(echo "[req]
httpd_1  | distinguished_name = req_distinguished_name
httpd_1  | x509_extensions = v3_req
httpd_1  |
httpd_1  | [req_distinguished_name]
httpd_1  |
httpd_1  | [ v3_req ]
httpd_1  | basicConstraints = critical, CA:FALSE
httpd_1  | subjectKeyIdentifier = hash
httpd_1  | keyUsage = critical, digitalSignature, keyEncipherment
httpd_1  | authorityKeyIdentifier = keyid:always,issuer:always
httpd_1  | extendedKeyUsage = serverAuth, clientAuth
httpd_1  | subjectAltName=${ALT_NAMES}") -keyout /etc/httpd/cert/main/localhost.key -subj '/C=DE/ST=Berlin/L=Berlin/O=Devilbox/OU=Devilbox/CN=localhost/emailAddress=admin@localhost' -out /etc/httpd/cert/main/localhost.csr
httpd_1  | $ openssl x509 -req -sha256 -extensions v3_req -extfile <(echo "[req]
httpd_1  | distinguished_name = req_distinguished_name
httpd_1  | x509_extensions = v3_req
httpd_1  |
httpd_1  | [req_distinguished_name]
httpd_1  |
httpd_1  | [ v3_req ]
httpd_1  | basicConstraints = critical, CA:FALSE
httpd_1  | subjectKeyIdentifier = hash
httpd_1  | keyUsage = critical, digitalSignature, keyEncipherment
httpd_1  | authorityKeyIdentifier = keyid:always,issuer:always
httpd_1  | extendedKeyUsage = serverAuth, clientAuth
httpd_1  | subjectAltName=${ALT_NAMES}") -days 825 -in /etc/httpd/cert/main/localhost.csr -CA /ca/devilbox-ca.crt -CAkey /ca/devilbox-ca.key -CAcreateserial -out /etc/httpd/cert/main/localhost.crt
httpd_1  | Certificate:
httpd_1  |     Data:
httpd_1  |         Version: 3 (0x2)
httpd_1  |         Serial Number:
httpd_1  |             1d:77:10:1e:d7:35:a6:5d:ce:2e:65:57:5d:0d:f0:ac:a6:6f:a2:41
httpd_1  |         Signature Algorithm: sha256WithRSAEncryption
httpd_1  |         Issuer: C = DE, ST = Berlin, L = Berlin, O = Devilbox, OU = Devilbox, CN = Devilbox Root CA, emailAddress = [email protected], dnQualifier = "IuYAEvl+P0p/LJdHibbocZYHudM="
httpd_1  |         Validity
httpd_1  |             Not Before: Jul 10 03:46:23 2023 GMT
httpd_1  |             Not After : Oct 12 03:46:23 2025 GMT
httpd_1  |         Subject: C = DE, ST = Berlin, L = Berlin, O = Devilbox, OU = Devilbox, CN = localhost, emailAddress = admin@localhost
httpd_1  |         Subject Public Key Info:
httpd_1  |             Public Key Algorithm: rsaEncryption
httpd_1  |                 Public-Key: (2048 bit)
httpd_1  |                 Modulus:
httpd_1  |                     00:c5:6f:f2:75:0b:73:de:f8:66:67:a3:37:b2:fe:
httpd_1  |                     82:2e:16:92:2f:8c:f6:62:61:c9:f8:9f:69:65:16:
httpd_1  |                     a4:85:bc:f0:45:aa:d8:c8:fb:b9:9a:4d:11:a3:ed:
httpd_1  |                     c4:57:ae:3e:60:ce:4f:40:28:91:ab:ff:de:0b:80:
httpd_1  |                     6a:58:09:16:7d:35:8b:07:07:fe:d8:47:10:e6:c0:
httpd_1  |                     3d:7b:81:ab:33:bb:cc:48:65:30:4f:79:3f:33:5a:
httpd_1  |                     e0:af:0f:0b:13:6a:32:77:54:a6:80:2a:18:63:e3:
httpd_1  |                     95:e8:e2:28:05:dc:98:21:06:fc:17:21:80:d3:a5:
httpd_1  |                     0a:cb:69:fd:23:3c:4b:f9:ac:c2:78:54:e9:a3:3b:
httpd_1  |                     d7:06:42:75:a2:a3:e3:96:33:4e:f9:99:38:5f:b1:
httpd_1  |                     a0:54:ff:13:34:dd:6b:6b:da:2c:68:de:b3:93:3d:
httpd_1  |                     6f:d5:01:90:a6:44:22:1a:51:de:28:51:f1:d3:e5:
httpd_1  |                     14:52:d1:e9:80:7f:35:14:a1:48:0a:bf:23:7a:1b:
httpd_1  |                     0d:49:88:36:eb:a8:a9:2f:9b:f8:f1:fb:f6:8d:41:
httpd_1  |                     bc:c5:83:d7:1c:e2:29:99:2e:fd:d6:ec:b0:3d:7d:
httpd_1  |                     f3:42:38:8a:18:6e:ca:59:39:67:8f:b9:60:31:8a:
httpd_1  |                     ce:0e:b4:cb:ed:11:e9:ca:0d:8e:84:2a:fc:82:af:
httpd_1  |                     01:95
httpd_1  |                 Exponent: 65537 (0x10001)
httpd_1  |         X509v3 extensions:
httpd_1  |             X509v3 Basic Constraints: critical
httpd_1  |                 CA:FALSE
httpd_1  |             X509v3 Subject Key Identifier:
httpd_1  |                 F9:E0:06:F2:8E:01:10:81:85:67:20:01:9D:46:06:8B:2F:C6:36:17
httpd_1  |             X509v3 Key Usage: critical
httpd_1  |                 Digital Signature, Key Encipherment
httpd_1  |             X509v3 Authority Key Identifier:
httpd_1  |                 keyid:22:E6:00:12:F9:7E:3F:4A:7F:2C:97:47:89:B6:E8:71:96:07:B9:D3
httpd_1  |                 DirName:/C=DE/ST=Berlin/L=Berlin/O=Devilbox/OU=Devilbox/CN=Devilbox Root CA/[email protected]/dnQualifier=IuYAEvl\+P0p\/LJdHibbocZYHudM= 
httpd_1  |                 serial:1B:A6:02:12:FA:F0:02:2E:B6:92:92:9C:AE:73:DE:E0:62:81:0A:67
httpd_1  |             X509v3 Extended Key Usage:
httpd_1  |                 TLS Web Server Authentication, TLS Web Client Authentication
httpd_1  |             X509v3 Subject Alternative Name:
httpd_1  |                 DNS:localhost, DNS:localhost, DNS:*.localhost, DNS:devilbox, DNS:*.devilbox, DNS:httpd
httpd_1  |     Signature Algorithm: sha256WithRSAEncryption
httpd_1  |     Signature Value:
httpd_1  |         25:f9:d6:f9:d9:61:f1:2e:1d:ad:9f:e0:bc:c4:91:92:34:96:
httpd_1  |         79:b8:33:eb:31:54:82:c9:86:33:d7:52:f3:a3:ef:14:4d:21:
httpd_1  |         c1:3f:72:1a:60:32:66:90:c0:b4:43:4b:73:db:78:2f:23:27:
httpd_1  |         4d:ec:55:97:65:0e:6b:d4:69:cc:d1:bb:a5:de:f0:29:0d:6e:
httpd_1  |         3e:b7:cc:01:4f:0b:f3:13:c8:37:91:df:94:62:8e:ed:98:13:
httpd_1  |         58:52:dc:b9:4b:7f:a3:50:11:59:c4:8c:93:6c:b3:b6:08:58:
httpd_1  |         af:a1:4a:66:17:4e:ae:15:da:9d:d0:b3:a5:fd:0a:b4:1f:0b:
httpd_1  |         3f:58:88:16:74:66:43:91:0f:d7:da:36:c7:c2:3a:84:e4:e5:
httpd_1  |         0e:13:e2:23:2a:0b:ea:13:9c:bf:73:ef:20:12:97:7b:8c:62:
httpd_1  |         f4:00:76:50:7a:e2:e9:f6:77:78:45:12:26:47:37:37:7f:d2:
httpd_1  |         c6:3b:e1:f1:1b:e5:b1:d6:58:ed:b4:de:28:f7:ee:70:51:98:
httpd_1  |         98:87:90:b3:34:c3:3e:4c:46:01:d5:c7:cf:38:dd:d7:1b:3f:
httpd_1  |         48:d2:32:c6:11:e2:f8:7f:36:df:e3:98:72:55:2f:40:03:79:
httpd_1  |         f2:e1:97:08:28:ee:ce:3e:c7:8e:c6:b1:75:19:76:af:0f:69:
httpd_1  |         35:2b:da:c2
httpd_1  | /etc/httpd/cert/main/localhost.crt: OK
httpd_1  | root $ chown -R 1000:1000 /ca
httpd_1  | [INFO] Starting supervisord: 4.2.4
httpd_1  | 2023-07-10 03:46:24,283 INFO Set uid to user 0 succeeded
httpd_1  | 2023-07-10 03:46:24,285 INFO supervisord started with pid 1
httpd_1  | 2023-07-10 03:46:25,288 INFO spawned: 'httpd' with pid 171
httpd_1  | 2023-07-10 03:46:25,291 INFO spawned: 'watcherd' with pid 172
httpd_1  | [Mon Jul 10 03:46:25.323876 2023] [mpm_event:notice] [pid 171:tid 140521270971208] AH00489: Apache/2.4.54 (Unix) OpenSSL/3.0.7 configured -- resuming normal operations  
httpd_1  | [Mon Jul 10 03:46:25.323943 2023] [core:notice] [pid 171:tid 140521270971208] AH00094: Command line: 'httpd -D FOREGROUND'
httpd_1  | 2023-07-10 03:46:26,325 INFO success: httpd entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
httpd_1  | 2023-07-10 03:46:26,326 INFO success: watcherd entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
httpd_1  | watcherd: [2023-07-10 03:46:28] Starting daemon.
httpd_1  | $ openssl req -newkey rsa:2048 -sha256 -nodes -extensions v3_req -config <(echo "[req]
httpd_1  | distinguished_name = req_distinguished_name
httpd_1  | x509_extensions = v3_req
httpd_1  |
httpd_1  | [req_distinguished_name]
httpd_1  |
httpd_1  | [ v3_req ]
httpd_1  | basicConstraints = critical, CA:FALSE
httpd_1  | subjectKeyIdentifier = hash
httpd_1  | keyUsage = critical, digitalSignature, keyEncipherment
httpd_1  | authorityKeyIdentifier = keyid:always,issuer:always
httpd_1  | extendedKeyUsage = serverAuth, clientAuth
httpd_1  | subjectAltName=${ALT_NAMES}") -keyout /etc/httpd/cert/mass/anything.loc.key -subj '/C=DE/ST=Berlin/L=Berlin/O=Devilbox/OU=Devilbox/CN=anything.loc/[email protected]' -out /etc/httpd/cert/mass/anything.loc.csr
httpd_1  | $ openssl x509 -req -sha256 -extensions v3_req -extfile <(echo "[req]
httpd_1  | distinguished_name = req_distinguished_name
httpd_1  | x509_extensions = v3_req
httpd_1  |
httpd_1  | [req_distinguished_name]
httpd_1  |
httpd_1  | [ v3_req ]
httpd_1  | basicConstraints = critical, CA:FALSE
httpd_1  | subjectKeyIdentifier = hash
httpd_1  | keyUsage = critical, digitalSignature, keyEncipherment
httpd_1  | authorityKeyIdentifier = keyid:always,issuer:always
httpd_1  | extendedKeyUsage = serverAuth, clientAuth
httpd_1  | subjectAltName=${ALT_NAMES}") -days 825 -in /etc/httpd/cert/mass/anything.loc.csr -CA /ca/devilbox-ca.crt -CAkey /ca/devilbox-ca.key -CAcreateserial -out /etc/httpd/cert/mass/anything.loc.crt
httpd_1  | Certificate:
httpd_1  |     Data:
httpd_1  |         Version: 3 (0x2)
httpd_1  |         Serial Number:
httpd_1  |             1d:77:10:1e:d7:35:a6:5d:ce:2e:65:57:5d:0d:f0:ac:a6:6f:a2:42
httpd_1  |         Signature Algorithm: sha256WithRSAEncryption
httpd_1  |         Issuer: C = DE, ST = Berlin, L = Berlin, O = Devilbox, OU = Devilbox, CN = Devilbox Root CA, emailAddress = [email protected], dnQualifier = "IuYAEvl+P0p/LJdHibbocZYHudM="
httpd_1  |         Validity
httpd_1  |             Not Before: Jul 10 03:46:28 2023 GMT
httpd_1  |             Not After : Oct 12 03:46:28 2025 GMT
httpd_1  |         Subject: C = DE, ST = Berlin, L = Berlin, O = Devilbox, OU = Devilbox, CN = anything.loc, emailAddress = [email protected]
httpd_1  |         Subject Public Key Info:
httpd_1  |             Public Key Algorithm: rsaEncryption
httpd_1  |                 Public-Key: (2048 bit)
httpd_1  |                 Modulus:
httpd_1  |                     00:c4:52:01:c4:28:d0:c1:d1:57:8e:86:5e:e8:0d:
httpd_1  |                     21:76:fe:46:19:ef:30:83:d0:73:b4:45:3f:b4:16:
httpd_1  |                     13:d3:c8:66:2b:77:96:60:7d:96:6b:5b:19:54:7d:
httpd_1  |                     29:7e:6d:ad:55:4e:09:4a:e8:f0:d7:f1:90:ea:a4:
httpd_1  |                     c2:05:99:bb:1c:41:7e:81:0a:a7:44:11:54:f7:35:
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.355+00:00"},"s":"I",  "c":"NETWORK",  "id":4915701, "ctx":"-","msg":"Initialized wire specification","attr":{"spec":{"incomingExternal
Client":{"minWireVersion":0,"maxWireVersion":13},"incomingInternalClient":{"minWireVersion":0,"maxWireVersion":13},"outgoing":{"minWireVersion":0,"maxWireVersion":13},"isInternalClient":true}}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.356+00:00"},"s":"I",  "c":"CONTROL",  "id":23285,   "ctx":"main","msg":"Automatically disabling TLS 1.0, to force-enable TLS 1.0 specify --sslDisabledProtocols 'none'"}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.356+00:00"},"s":"W",  "c":"ASIO",     "id":22601,   "ctx":"main","msg":"No TransportLayer configured during NetworkInterface startup"}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.357+00:00"},"s":"I",  "c":"NETWORK",  "id":4648601, "ctx":"main","msg":"Implicit TCP FastOpen unavailable. If TCP FastOpen is required, set tcpFastOpenServer, tcpFastOpenClient, and tcpFastOpenQueueSize."}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.359+00:00"},"s":"W",  "c":"ASIO",     "id":22601,   "ctx":"main","msg":"No TransportLayer configured during NetworkInterface startup"}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.359+00:00"},"s":"I",  "c":"REPL",     "id":5123008, "ctx":"main","msg":"Successfully registered PrimaryOnlyService","attr":{"service":"TenantMigrationDonorService","ns":"config.tenantMigrationDonors"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.359+00:00"},"s":"I",  "c":"REPL",     "id":5123008, "ctx":"main","msg":"Successfully registered PrimaryOnlyService","attr":{"service":"TenantMigrationRecipientService","ns":"config.tenantMigrationRecipients"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.359+00:00"},"s":"I",  "c":"CONTROL",  "id":5945603, "ctx":"main","msg":"Multi threading initialized"}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.360+00:00"},"s":"I",  "c":"CONTROL",  "id":4615611, "ctx":"initandlisten","msg":"MongoDB starting","attr":{"pid":1,"port":27017,"dbPath":"/data/db","architecture":"64-bit","host":"mongo"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.360+00:00"},"s":"I",  "c":"CONTROL",  "id":23403,   "ctx":"initandlisten","msg":"Build Info","attr":{"buildInfo":{"version":"5.0.18","
gitVersion":"796abe56bfdbca6968ff570311bf72d93632825b","openSSLVersion":"OpenSSL 1.1.1f  31 Mar 2020","modules":[],"allocator":"tcmalloc","environment":{"distmod":"ubuntu2004","distarch":"x86_64","target_arch":"x86_64"}}}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.360+00:00"},"s":"I",  "c":"CONTROL",  "id":51765,   "ctx":"initandlisten","msg":"Operating System","attr":{"os":{"name":"Ubuntu","version":"20.04"}}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.360+00:00"},"s":"I",  "c":"CONTROL",  "id":21951,   "ctx":"initandlisten","msg":"Options set by command line","attr":{"options":{"net":{"bindIp":"*"}}}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.362+00:00"},"s":"I",  "c":"STORAGE",  "id":22270,   "ctx":"initandlisten","msg":"Storage engine to use detected by data files","attr":{"dbpath":"/data/db","storageEngine":"wiredTiger"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.363+00:00"},"s":"I",  "c":"STORAGE",  "id":22297,   "ctx":"initandlisten","msg":"Using the XFS filesystem is strongly recommended with the WiredTiger storage engine. See http://dochub.mongodb.org/core/prodnotes-filesystem","tags":["startupWarnings"]}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.363+00:00"},"s":"I",  "c":"STORAGE",  "id":22315,   "ctx":"initandlisten","msg":"Opening WiredTiger","attr":{"config":"create,cache_si
ze=3461M,session_max=33000,eviction=(threads_min=4,threads_max=4),config_base=false,statistics=(fast),log=(enabled=true,archive=true,path=journal,compressor=snappy),builtin_extensi
on_config=(zstd=(compression_level=6)),file_manager=(close_idle_time=600,close_scan_interval=10,close_handle_minimum=250),statistics_log=(wait=0),verbose=[recovery_progress,checkpoint_progress,compact_progress],"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:24.989+00:00"},"s":"I",  "c":"STORAGE",  "id":22430,   "ctx":"initandlisten","msg":"WiredTiger message","attr":{"message":"[1688960784:989143][1:0x7f55bddfbc80], txn-recover: [WT_VERB_RECOVERY_PROGRESS] Recovering log 19 through 20"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.061+00:00"},"s":"I",  "c":"STORAGE",  "id":22430,   "ctx":"initandlisten","msg":"WiredTiger message","attr":{"message":"[1688960785:61513][1:0x7f55bddfbc80], txn-recover: [WT_VERB_RECOVERY_PROGRESS] Recovering log 20 through 20"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.139+00:00"},"s":"I",  "c":"STORAGE",  "id":22430,   "ctx":"initandlisten","msg":"WiredTiger message","attr":{"message":"[1688960785:139688][1:0x7f55bddfbc80], txn-recover: [WT_VERB_RECOVERY_ALL] Main recovery loop: starting at 19/15104 to 20/256"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.205+00:00"},"s":"I",  "c":"STORAGE",  "id":22430,   "ctx":"initandlisten","msg":"WiredTiger message","attr":{"message":"[1688960785:205906][1:0x7f55bddfbc80], txn-recover: [WT_VERB_RECOVERY_PROGRESS] Recovering log 19 through 20"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.262+00:00"},"s":"I",  "c":"STORAGE",  "id":22430,   "ctx":"initandlisten","msg":"WiredTiger message","attr":{"message":"[1688960785:262216][1:0x7f55bddfbc80], txn-recover: [WT_VERB_RECOVERY_PROGRESS] Recovering log 20 through 20"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.293+00:00"},"s":"I",  "c":"STORAGE",  "id":22430,   "ctx":"initandlisten","msg":"WiredTiger message","attr":{"message":"[1688960785:293753][1:0x7f55bddfbc80], txn-recover: [WT_VERB_RECOVERY_ALL] Set global recovery timestamp: (0, 0)"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.293+00:00"},"s":"I",  "c":"STORAGE",  "id":22430,   "ctx":"initandlisten","msg":"WiredTiger message","attr":{"message":"[1688960785:293921][1:0x7f55bddfbc80], txn-recover: [WT_VERB_RECOVERY_ALL] Set global oldest timestamp: (0, 0)"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.299+00:00"},"s":"I",  "c":"STORAGE",  "id":22430,   "ctx":"initandlisten","msg":"WiredTiger message","attr":{"message":"[1688960785:29
9734][1:0x7f55bddfbc80], WT_SESSION.checkpoint: [WT_VERB_CHECKPOINT_PROGRESS] saving checkpoint snapshot min: 1, snapshot max: 1 snapshot count: 0, oldest timestamp: (0, 0) , meta checkpoint timestamp: (0, 0) base write gen: 30524"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.312+00:00"},"s":"I",  "c":"STORAGE",  "id":4795906, "ctx":"initandlisten","msg":"WiredTiger opened","attr":{"durationMillis":949}}    
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.312+00:00"},"s":"I",  "c":"RECOVERY", "id":23987,   "ctx":"initandlisten","msg":"WiredTiger recoveryTimestamp","attr":{"recoveryTimestamp":{"$timestamp":{"t":0,"i":0}}}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.320+00:00"},"s":"I",  "c":"STORAGE",  "id":22262,   "ctx":"initandlisten","msg":"Timestamp monitor starting"}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.326+00:00"},"s":"W",  "c":"CONTROL",  "id":22120,   "ctx":"initandlisten","msg":"Access control is not enabled for the database. Read and write access to data and configuration is unrestricted","tags":["startupWarnings"]}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.326+00:00"},"s":"W",  "c":"CONTROL",  "id":22178,   "ctx":"initandlisten","msg":"/sys/kernel/mm/transparent_hugepage/enabled is 'always'. We suggest setting it to 'never'","tags":["startupWarnings"]}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.330+00:00"},"s":"I",  "c":"NETWORK",  "id":4915702, "ctx":"initandlisten","msg":"Updated wire specification","attr":{"oldSpec":{"incom
ingExternalClient":{"minWireVersion":0,"maxWireVersion":13},"incomingInternalClient":{"minWireVersion":0,"maxWireVersion":13},"outgoing":{"minWireVersion":0,"maxWireVersion":13},"i
sInternalClient":true},"newSpec":{"incomingExternalClient":{"minWireVersion":0,"maxWireVersion":13},"incomingInternalClient":{"minWireVersion":13,"maxWireVersion":13},"outgoing":{"minWireVersion":13,"maxWireVersion":13},"isInternalClient":true}}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.330+00:00"},"s":"I",  "c":"STORAGE",  "id":5071100, "ctx":"initandlisten","msg":"Clearing temp directory"}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.332+00:00"},"s":"I",  "c":"CONTROL",  "id":20536,   "ctx":"initandlisten","msg":"Flow Control is enabled on this deployment"}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.334+00:00"},"s":"I",  "c":"FTDC",     "id":20625,   "ctx":"initandlisten","msg":"Initializing full-time diagnostic data capture","attr":{"dataDirectory":"/data/db/diagnostic.data"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.338+00:00"},"s":"I",  "c":"REPL",     "id":6015317, "ctx":"initandlisten","msg":"Setting new configuration state","attr":{"newState":"ConfigReplicationDisabled","oldState":"ConfigPreStart"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.340+00:00"},"s":"I",  "c":"NETWORK",  "id":23015,   "ctx":"listener","msg":"Listening on","attr":{"address":"/tmp/mongodb-27017.sock"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.340+00:00"},"s":"I",  "c":"NETWORK",  "id":23015,   "ctx":"listener","msg":"Listening on","attr":{"address":"0.0.0.0"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:46:25.340+00:00"},"s":"I",  "c":"NETWORK",  "id":23016,   "ctx":"listener","msg":"Waiting for connections","attr":{"port":27017,"ssl":"off"}}
mongo_1  | {"t":{"$date":"2023-07-10T03:47:25.327+00:00"},"s":"I",  "c":"STORAGE",  "id":22430,   "ctx":"Checkpointer","msg":"WiredTiger message","attr":{"message":"[1688960845:327
614][1:0x7f55b55e9700], WT_SESSION.checkpoint: [WT_VERB_CHECKPOINT_PROGRESS] saving checkpoint snapshot min: 3, snapshot max: 3 snapshot count: 0, oldest timestamp: (0, 0) , meta checkpoint timestamp: (0, 0) base write gen: 30524"}}
httpd_1  |                     52:26:67:2f:e2:5e:08:f2:6e:5a:28:85:ac:0b:9a:
httpd_1  |                     d4:c8:df:8c:e9:df:dd:6d:91:db:69:e8:c6:cd:8b:
httpd_1  |                     05:7e:92:f5:23:fe:b3:95:10:0b:14:d1:3b:c5:5a:
httpd_1  |                     09:2d:aa:df:25:93:02:e3:44:1f:2b:b9:86:00:aa:
httpd_1  |                     af:95:6e:8e:29:15:85:db:7e:27:7c:46:e8:f6:21:
httpd_1  |                     85:5a:9f:00:10:2f:51:4b:8f:0d:e0:a4:a3:8b:85:
httpd_1  |                     d6:9e:2f:b5:60:86:ed:a8:0d:50:6d:ae:17:0e:13:
httpd_1  |                     06:21:24:5a:c9:29:66:24:32:24:ec:e0:6b:4e:b7:
httpd_1  |                     0c:b8:00:a4:2d:82:ba:f3:74:18:50:14:52:09:09:
httpd_1  |                     70:6c:ae:37:47:87:d5:53:a2:cf:f1:a9:d1:ab:59:
httpd_1  |                     2f:25:df:8b:2a:6e:e7:80:11:02:1b:43:fb:23:88:
httpd_1  |                     b7:1a:c9:72:3d:d3:8d:b9:d7:2a:86:ef:a2:a2:3e:
httpd_1  |                     48:b1
httpd_1  |                 Exponent: 65537 (0x10001)
httpd_1  |         X509v3 extensions:
httpd_1  |             X509v3 Basic Constraints: critical
httpd_1  |                 CA:FALSE
httpd_1  |             X509v3 Subject Key Identifier:
httpd_1  |                 90:EE:66:50:F0:F6:3E:C3:B3:92:B2:60:CF:39:4D:08:B4:EB:8B:78
httpd_1  |             X509v3 Key Usage: critical
httpd_1  |                 Digital Signature, Key Encipherment
httpd_1  |             X509v3 Authority Key Identifier:
httpd_1  |                 keyid:22:E6:00:12:F9:7E:3F:4A:7F:2C:97:47:89:B6:E8:71:96:07:B9:D3
httpd_1  |                 DirName:/C=DE/ST=Berlin/L=Berlin/O=Devilbox/OU=Devilbox/CN=Devilbox Root CA/[email protected]/dnQualifier=IuYAEvl\+P0p\/LJdHibbocZYHudM= 
httpd_1  |                 serial:1B:A6:02:12:FA:F0:02:2E:B6:92:92:9C:AE:73:DE:E0:62:81:0A:67
httpd_1  |             X509v3 Extended Key Usage:
httpd_1  |                 TLS Web Server Authentication, TLS Web Client Authentication
httpd_1  |             X509v3 Subject Alternative Name:
httpd_1  |                 DNS:anything.loc, DNS:*.anything.loc
httpd_1  |     Signature Algorithm: sha256WithRSAEncryption
httpd_1  |     Signature Value:
httpd_1  |         06:31:97:e5:6b:2d:09:14:f6:09:27:c4:ed:41:bf:30:b3:46:
httpd_1  |         44:8e:fc:43:ba:a5:ee:f2:d9:d3:79:a2:2a:e5:ea:8d:f7:04:
httpd_1  |         49:54:c5:bf:dc:5b:0e:01:43:46:11:7b:23:4c:1c:bf:98:68:
httpd_1  |         d8:fe:98:b6:ab:19:70:85:a3:b3:83:6e:c0:67:54:0d:94:1d:
httpd_1  |         d3:49:3a:bc:ef:13:84:f0:50:36:ef:7d:bc:94:0a:e0:47:bb:
httpd_1  |         b7:8f:0e:75:d2:d6:fc:94:29:a8:d4:36:e3:ed:5b:31:a0:8b:
httpd_1  |         16:f1:16:a2:f6:10:49:8f:e3:88:56:72:d6:01:60:21:99:6d:
httpd_1  |         c7:c9:c2:7b:52:c7:0a:dc:9e:73:7c:c3:03:51:9c:8d:e6:19:
httpd_1  |         a3:e9:43:ac:92:57:e7:b3:78:93:6c:6d:53:9f:64:09:cd:ea:
httpd_1  |         94:5b:82:02:ae:7a:6e:6f:d5:4e:62:7f:59:df:e9:b2:ce:b7:
httpd_1  |         47:6c:4f:e9:cb:25:3e:2d:d5:b4:49:14:c6:dc:f2:2d:08:eb:
httpd_1  |         d3:8a:ac:d4:92:3e:57:8c:5b:8b:f7:83:d7:e9:0f:bf:b2:24:
httpd_1  |         6a:83:b3:4f:c5:e2:a8:38:8e:08:b0:ff:b6:8b:58:37:dd:e9:
httpd_1  |         df:3e:ba:93:ce:10:7c:01:b2:4e:6d:28:6c:5a:98:f8:16:3e:
httpd_1  |         af:3e:ca:2d
httpd_1  | /etc/httpd/cert/mass/anything.loc.crt: OK
httpd_1  | $ vhost-gen -p "/shared/httpd/anything" -n "anything" -c /etc/vhost-gen/mass.yml -o "/shared/httpd/anything/.devilbox/" -s -v -m both
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:28): Loading configuration file        (-c): /etc/vhost-gen/mass.yml
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:28): Loading vhost template (global)   (-t): /etc/vhost-gen/templates/apache24.yml
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:28): Loading vhost template (override) (-o): /shared/httpd/anything/.devilbox/apache24.yml
httpd_1  | vhost-gen: [WARN]  (2023-07-10 03:46:28): Override Vhost template not found: /shared/httpd/anything/.devilbox/apache24.yml
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:28): Creating vhost type: https and http (both)
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:28): Using vhost name: anything.loc
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:28): Log setting: dir -> True
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:28): Log setting: Not specified
httpd_1  | vhost-gen: [INFO]  (2023-07-10 03:46:28): Vhost config written to: /etc/httpd/vhost.d/anything.conf
httpd_1  | watcherd: [2023-07-10 03:46:28] [OK]  ADD: succeeded: /shared/httpd/anything
httpd_1  | $ openssl req -newkey rsa:2048 -sha256 -nodes -extensions v3_req -config <(echo "[req]
httpd_1  | distinguished_name = req_distinguished_name
httpd_1  | x509_extensions = v3_req
httpd_1  |
httpd_1  | [req_distinguished_name]
httpd_1  |
httpd_1  | [ v3_req ]
httpd_1  | basicConstraints = critical, CA:FALSE
httpd_1  | subjectKeyIdentifier = hash
httpd_1  | keyUsage = critical, digitalSignature, keyEncipherment
httpd_1  | authorityKeyIdentifier = keyid:always,issuer:always
httpd_1  | extendedKeyUsage = serverAuth, clientAuth
httpd_1  | subjectAltName=${ALT_NAMES}") -keyout /etc/httpd/cert/mass/openmage.loc.key -subj '/C=DE/ST=Berlin/L=Berlin/O=Devilbox/OU=Devilbox/CN=openmage.loc/[email protected]' -out /etc/httpd/cert/mass/openmage.loc.csr
httpd_1  | $ openssl x509 -req -sha256 -extensions v3_req -extfile <(echo "[req]
httpd_1  | distinguished_name = req_distinguished_name
httpd_1  | x509_extensions = v3_req
httpd_1  |
httpd_1  | [req_distinguished_name]
httpd_1  |
httpd_1  | [ v3_req ]
httpd_1  | basicConstraints = critical, CA:FALSE
httpd_1  | subjectKeyIdentifier = hash
httpd_1  | keyUsage = critical, digitalSignature, keyEncipherment
httpd_1  | authorityKeyIdentifier = keyid:always,issuer:always
httpd_1  | extendedKeyUsage = serverAuth, clientAuth
httpd_1  | subjectAltName=${ALT_NAMES}") -days 825 -in /etc/httpd/cert/mass/openmage.loc.csr -CA /ca/devilbox-ca.crt -CAkey /ca/devilbox-ca.key -CAcreateserial -out /etc/httpd/cert/mass/openmage.loc.crt
httpd_1  | Certificate:
httpd_1  |     Data:
httpd_1  |         Version: 3 (0x2)
httpd_1  |         Serial Number:
httpd_1  |             1d:77:10:1e:d7:35:a6:5d:ce:2e:65:57:5d:0d:f0:ac:a6:6f:a2:43
httpd_1  |         Signature Algorithm: sha256WithRSAEncryption
httpd_1  |         Issuer: C = DE, ST = Berlin, L = Berlin, O = Devilbox, OU = Devilbox, CN = Devilbox Root CA, emailAddress = [email protected], dnQualifier = "IuYAEvl+P0p/LJdHibbocZYHudM="
(too long had to edit)

(Optional) Additional information

No response

@kevinjavitz
Copy link
Author

Actually this can be closed sorry, I updated to devilbox 3.0.0 beta 3 and magically the error is gone and all is working fine, so anyone has this same error I recommend updating using the instructions here https://devilbox.readthedocs.io/en/latest/maintenance/update-the-devilbox.html

@kevinjavitz
Copy link
Author

actually still doing it, just not quite as frequently, even when xdebug debugging chrome extension is set to disabled

my php.ini:

xdebug.mode               = debug
;xdebug.remote_handler     = dbgp
;xdebug.start_with_request = yes
xdebug.scream = off

; How to connect
xdebug.client_port          = 9003
xdebug.client_host          = 172.19.240.1
xdebug.discover_client_host = true

; Logging
; xdebug.log       = /var/log/php/xdebug.log
; xdebug.log_level = 7

; IDE Configuration
xdebug.idekey    = PHPSTORM
;xdebug.idekey    = VSCODE

; vim: set ft=dosini:
max_input_time     = 0
max_execution_time = 0

error_reporting         = E_ALL & ~E_DEPRECATED
xmlrpc_errors           = Off
report_memleaks         = On
display_errors          = On
display_startup_errors  = On
html_errors             = On

@kevinjavitz kevinjavitz reopened this Jul 11, 2023
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
bug triage Needs triaging
Projects
None yet
Development

No branches or pull requests

2 participants